"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
tests: define GIT_TEST_SIDEBAND_ALL
{fetch,upload}-pack: sideband v2 fetch response
sideband: reverse its dependency on pkt-line
pkt-line: introduce struct packet_writer
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line
Update the protocol message specification to allow only the limited
use of scaled quantities. This is ensure potential compatibility
issues will not go out of hand.
* js/filter-options-should-use-plain-int:
filter-options: expand scaled numbers
tree:<depth>: skip some trees even when collecting omits
list-objects-filter: teach tree:# how to handle >0
Define a GIT_TEST_SIDEBAND_ALL environment variable meant to be used
from tests. When set to true, this overrides uploadpack.allowsidebandall
to true, allowing the entire test suite to be run as if this
configuration is in place for all repositories.
As of this patch, all tests pass whether GIT_TEST_SIDEBAND_ALL is unset
or set to 1.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a response to a fetch request has sideband support only while
the packfile is being sent, meaning that the server cannot send notices
until the start of the packfile.
Extend sideband support in protocol v2 fetch responses to the whole
response. upload-pack will advertise it if the
uploadpack.allowsidebandall configuration variable is set, and
fetch-pack will automatically request it if advertised.
If the sideband is to be used throughout the whole response, upload-pack
will use it to send errors instead of prefixing a PKT-LINE payload with
"ERR ".
This will be tested in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When communicating with a remote server or a subprocess, use
expanded numbers rather than numbers with scaling suffix in the
object filter spec (e.g. "limit:blob=1k" becomes
"limit:blob=1024").
Update the protocol docs to note that clients should always perform this
expansion, to allow for more compatibility between server
implementations.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 685fbd3291 ("fetch-pack: perform a fetch using v2", 2018-03-15)
attempted to teach Git deepen-relative in protocol v2 (among other
things), but it didn't work:
(1) fetch-pack.c needs to emit "deepen-relative".
(2) upload-pack.c needs to ensure that the correct deepen_relative
variable is passed to deepen() (there are two - the static variable
and the one in struct upload_pack_data).
(3) Before deepen() computes the list of reachable shallows, it first
needs to mark all "our" refs as OUR_REF. v2 currently does not do
this, because unlike v0, it is not needed otherwise.
Fix all this and include a test demonstrating that it works now. For
(2), the static variable deepen_relative is also eliminated, removing a
source of confusion.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching using protocol v2, the remote may send a "shallow-info"
section if the client is shallow. If so, Git as the client currently
takes the shallow file lock, even if the "shallow-info" section is
empty.
This is not a problem except that Git does not support taking the
shallow file lock after modifying the shallow file, because
is_repository_shallow() stores information that is never cleared. And
this take-after-modify occurs when Git does a tag-following fetch from a
shallow repository on a transport that does not support tag following
(since in this case, 2 fetches are performed).
To solve this issue, take the shallow file lock (and perform all other
shallow processing) only if the "shallow-info" section is non-empty;
otherwise, behave as if it were empty.
A full solution (probably, ensuring that any action of committing
shallow file locks also includes clearing the information stored by
is_repository_shallow()) would solve the issue without need for this
patch, but this patch is independently useful (as an optimization to
prevent writing a file in an unnecessary case), hence why I wrote it. I
have included a NEEDSWORK outlining the full solution.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.
Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.
Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using and sharing a packet_reader while handling a Git pack protocol
request, the same reader option is used throughout the code. This makes
it easy to set a reader option to the request parsing code.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 024aa4696c (fetch-pack.c: use oidset to check existence of loose
object, 2018-03-14) added a cache to avoid calling stat() for a bunch of
loose objects we don't have.
Now that OBJECT_INFO_QUICK handles this caching itself, we can drop the
custom solution.
Note that this might perform slightly differently, as the original code
stopped calling readdir() when we saw more loose objects than there were
refs. So:
1. The old code might have spent work on readdir() to fill the cache,
but then decided there were too many loose objects, wasting that
effort.
2. The new code might spend a lot of time on readdir() if you have a
lot of loose objects, even though there are very few objects to
ask about.
In practice it probably won't matter either way; see the previous commit
for some discussion of the tradeoff.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each section in a protocol v2 response is followed by either a DELIM
packet (indicating more sections to follow) or a FLUSH packet
(indicating none to follow). But when parsing the "acknowledgments"
section, do_fetch_pack_v2() is liberal in accepting both, but determines
whether to continue reading or not based solely on the contents of the
"acknowledgments" section, not on whether DELIM or FLUSH was read.
There is no issue with a protocol-compliant server, but can result in
confusing error messages when communicating with a server that
serves unexpected additional sections. Consider a server that sends
"new-section" after "acknowledgments":
- client writes request
- client reads the "acknowledgments" section which contains no "ready",
then DELIM
- since there was no "ready", client needs to continue negotiation, and
writes request
- client reads "new-section", and reports to the end user "expected
'acknowledgments', received 'new-section'"
For the person debugging the involved Git implementation(s), the error
message is confusing in that "new-section" was not received in response
to the latest request, but to the first one.
One solution is to always continue reading after DELIM, but in this
case, we can do better. We know from the protocol that "ready" means at
least the packfile section is coming (hence, DELIM) and that no "ready"
means that no sections are to follow (hence, FLUSH). So teach
process_acks() to enforce this.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing into a repository that borrows its objects from an
alternate object store, "git receive-pack" that responds to the
push request on the other side lists the tips of refs in the
alternate to reduce the amount of objects transferred. This
sometimes is detrimental when the number of refs in the alternate
is absurdly large, in which case the bandwidth saved in potentially
fewer objects transferred is wasted in excessively large ref
advertisement. The alternate refs that are advertised are now
configurable with a pair of configuration variables.
* tb/filter-alternate-refs:
transport.c: introduce core.alternateRefsPrefixes
transport.c: introduce core.alternateRefsCommand
transport.c: extract 'fill_alternate_refs_command'
transport: drop refnames from for_each_alternate_ref
Over some transports, fetching objects with an exact commit object
name can be done without first seeing the ref advertisements. The
code has been optimized to exploit this.
* jt/avoid-ls-refs:
fetch: do not list refs if fetching only hashes
transport: list refs before fetch if necessary
transport: do not list refs if possible
transport: allow skipping of ref listing
A partial clone that is configured to lazily fetch missing objects
will on-demand issue a "git fetch" request to the originating
repository to fill not-yet-obtained objects. The request has been
optimized for requesting a tree object (and not the leaf blob
objects contained in it) by telling the originating repository that
no blobs are needed.
* jt/non-blob-lazy-fetch:
fetch-pack: exclude blobs when lazy-fetching trees
fetch-pack: avoid object flags if no_dependents
None of the current callers use the refname parameter we pass to their
callbacks. In theory somebody _could_ do so, but it's actually quite
weird if you think about it: it's a ref in somebody else's repository.
So the name has no meaning locally, and in fact there may be duplicates
if there are multiple alternates.
The users of this interface really only care about seeing some ref tips,
since that promises that the alternate has the full commit graph
reachable from there. So let's keep the information we pass back to the
bare minimum.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When all refs to be fetched are exact OIDs, it is possible to perform a
fetch without requiring the remote to list refs if protocol v2 is used.
Teach Git to do this.
This currently has an effect only for lazy fetches done from partial
clones. The change necessary to likewise optimize "git fetch <remote>
<sha-1>" will be done in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tip_oids_contain() lazily loads refs into an oidset at its first call.
It abuses the internal (sub)member .map.tablesize of that oidset to
check if it has done that already.
Determine if the oidset needs to be populated upfront and then do that
instead. This duplicates a loop, but simplifies the existing one by
separating concerns between the two.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code to determine if a request is unmatched to its own little
helper. This allows us to reuse it in a subsequent patch.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A partial clone with missing trees can be obtained using "git clone
--filter=tree:none <repo>". In such a repository, when a tree needs to
be lazily fetched, any tree or blob it directly or indirectly references
is fetched as well, regardless of whether the original command required
those objects, or if the local repository already had some of them.
This is because the fetch protocol, which the lazy fetch uses, does not
allow clients to request that only the wanted objects be sent, which
would be the ideal solution. This patch implements a partial solution:
specify the "blob:none" filter, somewhat reducing the fetch payload.
This change has no effect when lazily fetching blobs (due to how filters
work). And if lazily fetching a commit (such repositories are difficult
to construct and is not a use case we support very well, but it is
possible), referenced commits and trees are still fetched - only the
blobs are not fetched.
The necessary code change is done in fetch_pack() instead of somewhere
closer to where the "filter" instruction is written to the wire so that
only one part of the code needs to be changed in order for users of all
protocol versions to benefit from this optimization.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetch_pack() is invoked as part of another Git command (due to a
lazy fetch from a partial clone, for example), it uses object flags that
may already be used by the outer Git command.
The commit that introduced the lazy fetch feature (88e2f9ed8e
("introduce fetch-object: fetch one promisor object", 2017-12-05)) tried
to avoid this overlap, but it did not avoid it totally. It was
successful in avoiding writing COMPLETE, but did not avoid reading
COMPLETE, and did not avoid writing and reading ALTERNATE.
Ensure that no flags are written or read by fetch_pack() in the case
where it is used to perform a lazy fetch. To do this, it is sufficient
to avoid checking completeness of wanted refs (unnecessary in the case
of lazy fetches), and to avoid negotiation-related work (in the current
implementation, already, no negotiation is performed). After that was
done, the lack of overlap was verified by checking all direct and
indirect usages of COMPLETE and ALTERNATE - that they are read or
written only if no_dependents is false.
There are other possible solutions to this issue:
(1) Split fetch-pack.{c,h} into a flag-using part and a non-flag-using
part, and whenever no_dependents is set, only use the
non-flag-using part.
(2) Make fetch_pack() be able to be used with arbitrary repository
objects. fetch_pack() should then create its own repository object
based on the given repository object, with its own object
hashtable, so that the flags do not conflict.
(1) is possible but invasive - some functions would need to be split;
and such invasiveness would potentially be unnecessary if we ever were
to need (2) anyway. (2) would be useful if we were to support, say,
submodules that were partial clones themselves, but I don't know when or
if the Git project plans to support those.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test performed at the receiving end of "git push" to prevent
bad objects from entering repository can be customized via
receive.fsck.* configuration variables; we now have gained a
counterpart to do the same on the "git fetch" side, with
fetch.fsck.* configuration variables.
* ab/fsck-transfer-updates:
fsck: test and document unknown fsck.<msg-id> values
fsck: add stress tests for fsck.skipList
fsck: test & document {fetch,receive}.fsck.* config fallback
fetch: implement fetch.fsck.*
transfer.fsckObjects tests: untangle confusing setup
config doc: elaborate on fetch.fsckObjects security
config doc: elaborate on what transfer.fsckObjects does
config doc: unify the description of fsck.* and receive.fsck.*
config doc: don't describe *.fetchObjects twice
receive.fsck.<msg-id> tests: remove dead code
"git fetch" sometimes failed to update the remote-tracking refs,
which has been corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: unify ref in and out param
Add a server-side knob to skip commits in exponential/fibbonacci
stride in an attempt to cover wider swath of history with a smaller
number of iterations, potentially accepting a larger packfile
transfer, instead of going back one commit a time during common
ancestor discovery during the "git fetch" transaction.
* jt/fetch-negotiator-skipping:
negotiator/skipping: skip commits during fetch
"git fetch" learned a new option "--negotiation-tip" to limit the
set of commits it tells the other end as "have", to reduce wasted
bandwidth and cycles, which would be helpful when the receiving
repository has a lot of refs that have little to do with the
history at the remote it is fetching from.
* jt/fetch-nego-tip:
fetch-pack: support negotiation tip whitelist
Code restructuring and a small fix to transport protocol v2 during
fetching.
* jt/fetch-pack-negotiator:
fetch-pack: introduce negotiator API
fetch-pack: move common check and marking together
fetch-pack: make negotiation-related vars local
fetch-pack: use ref adv. to prune "have" sent
fetch-pack: directly end negotiation if ACK ready
fetch-pack: clear marks before re-marking
fetch-pack: split up everything_local()
When a user fetches:
- at least one up-to-date ref and at least one non-up-to-date ref,
- using HTTP with protocol v0 (or something else that uses the fetch
command of a remote helper)
some refs might not be updated after the fetch.
This bug was introduced in commit 989b8c4452 ("fetch-pack: put shallow
info in output parameter", 2018-06-28) which allowed transports to
report the refs that they have fetched in a new out-parameter
"fetched_refs". If they do so, transport_fetch_refs() makes this
information available to its caller.
Users of "fetched_refs" rely on the following 3 properties:
(1) it is the complete list of refs that was passed to
transport_fetch_refs(),
(2) it has shallow information (REF_STATUS_REJECT_SHALLOW set if
relevant), and
(3) it has updated OIDs if ref-in-want was used (introduced after
989b8c4452).
In an effort to satisfy (1), whenever transport_fetch_refs()
filters the refs sent to the transport, it re-adds the filtered refs to
whatever the transport supplies before returning it to the user.
However, the implementation in 989b8c4452 unconditionally re-adds the
filtered refs without checking if the transport refrained from reporting
anything in "fetched_refs" (which it is allowed to do), resulting in an
incomplete list, no longer satisfying (1).
An earlier effort to resolve this [1] solved the issue by readding the
filtered refs only if the transport did not refrain from reporting in
"fetched_refs", but after further discussion, it seems that the better
solution is to revert the API change that introduced "fetched_refs".
This API change was first suggested as part of a ref-in-want
implementation that allowed for ref patterns and, thus, there could be
drastic differences between the input refs and the refs actually fetched
[2]; we eventually decided to only allow exact ref names, but this API
change remained even though its necessity was decreased.
Therefore, revert this API change by reverting commit 989b8c4452, and
make receive_wanted_refs() update the OIDs in the sought array (like how
update_shallow() updates shallow information in the sought array)
instead. A test is also included to show that the user-visible bug
discussed at the beginning of this commit message no longer exists.
[1] https://public-inbox.org/git/20180801171806.GA122458@google.com/
[2] https://public-inbox.org/git/86a128c5fb710a41791e7183207c4d64889f9307.1485381677.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement support for fetch.fsck.* corresponding with the existing
receive.fsck.*. This allows for pedantically cloning repositories with
specific issues without turning off fetch.fsckObjects.
One such repository is https://github.com/robbyrussell/oh-my-zsh.git
which before this change will emit this error when cloned with
fetch.fsckObjects:
error: object 2b7227859263b6aabcc28355b0b994995b7148b6: zeroPaddedFilemode: contains zero-padded file modes
fatal: Error in object
fatal: index-pack failed
Now with fetch.fsck.zeroPaddedFilemode=warn we'll warn about that
issue, but the clone will succeed:
warning: object 2b7227859263b6aabcc28355b0b994995b7148b6: zeroPaddedFilemode: contains zero-padded file modes
warning: object a18c4d13c2a5fa2d4ecd5346c50e119b999b807d: zeroPaddedFilemode: contains zero-padded file modes
warning: object 84df066176c8da3fd59b13731a86d90f4f1e5c9d: zeroPaddedFilemode: contains zero-padded file modes
The motivation for this is to be able to turn on fetch.fsckObjects
globally across a fleet of computers but still be able to manually
clone various legacy repositories by either white-listing specific
issues, or better yet whitelist specific objects.
The use of --git-dir=* instead of -C in the tests could be considered
somewhat archaic, but the tests I'm adding here are duplicating the
corresponding receive.* tests with as few changes as possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" failed to correctly validate the set of objects it
received when making a shallow history deeper, which has been
corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: write shallow, then check connectivity
fetch-pack: implement ref-in-want
fetch-pack: put shallow info in output parameter
fetch: refactor to make function args narrower
fetch: refactor fetch_refs into two functions
fetch: refactor the population of peer ref OIDs
upload-pack: test negotiation with changing repository
upload-pack: implement ref-in-want
test-pkt-line: add unpack-sideband subcommand
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Introduce a new negotiation algorithm used during fetch that skips
commits in an effort to find common ancestors faster. The skips grow
similarly to the Fibonacci sequence as the commit walk proceeds further
away from the tips. The skips may cause unnecessary commits to be
included in the packfile, but the negotiation step typically ends more
quickly.
Usage of this algorithm is guarded behind the configuration flag
fetch.negotiationAlgorithm.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During negotiation, fetch-pack eventually reports as "have" lines all
commits reachable from all refs. Allow the user to restrict the commits
sent in this way by providing a whitelist of tips; only the tips
themselves and their ancestors will be sent.
Both globs and single objects are supported.
This feature is only supported for protocols that support connect or
stateless-connect (such as HTTP with protocol v2).
This will speed up negotiation when the repository has multiple
relatively independent branches (for example, when a repository
interacts with multiple repositories, such as with linux-next [1] and
torvalds/linux [2]), and the user knows which local branch is likely to
have commits in common with the upstream branch they are fetching.
[1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next/
[2] https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching, connectivity is checked after the shallow file is
updated. There are 2 issues with this: (1) the connectivity check is
only performed up to ancestors of existing refs (which is not thorough
enough if we were deepening an existing ref in the first place), and (2)
there is no rollback of the shallow file if the connectivity check
fails.
To solve (1), update the connectivity check to check the ancestry chain
completely in the case of a deepening fetch by refraining from passing
"--not --all" when invoking rev-list in connected.c.
To solve (2), have fetch_pack() perform its own connectivity check
before updating the shallow file. To support existing use cases in which
"git fetch-pack" is used to download objects without much regard as to
the connectivity of the resulting objects with respect to the existing
repository, the connectivity check is only done if necessary (that is,
the fetch is not a clone, and the fetch involves shallow/deepen
functionality). "git fetch" still performs its own connectivity check,
preserving correctness but sometimes performing redundant work. This
redundancy is mitigated by the fact that fetch_pack() reports if it has
performed a connectivity check itself, and if the transport supports
connect or stateless-connect, it will bubble up that report so that "git
fetch" knows not to perform the connectivity check in such a case.
This was noticed when a user tried to deepen an existing repository by
fetching with --no-shallow from a server that did not send all necessary
objects - the connectivity check as run by "git fetch" succeeded, but a
subsequent "git fsck" failed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of deref_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_object to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch-pack --all" used to unnecessarily fail upon seeing an
annotated tag that points at an object other than a commit.
* jk/fetch-all-peeled-fix:
fetch-pack: test explicitly that --all can fetch tag references pointing to non-commits
fetch-pack: don't try to fetch peel values with --all
Implement ref-in-want on the client side so that when a server supports
the "ref-in-want" feature, a client will send "want-ref" lines for each
reference the client wants to fetch. This feature allows clients to
tolerate inconsistencies that exist when a remote repository's refs
change during the course of negotiation.
This allows a client to request to request a particular ref without
specifying the OID of the ref. This means that instead of hitting an
error when a ref no longer points at the OID it did at the beginning of
negotiation, negotiation can continue and the value of that ref will be
sent at the termination of negotiation, just before a packfile is sent.
More information on the ref-in-want feature can be found in
Documentation/technical/protocol-v2.txt.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the transport fetch method signature, by adding an output
parameter, to allow transports to return information about the refs they
have fetched. Then communicate shallow status information through this
mechanism instead of by modifying the input list of refs.
This does require clients to sometimes generate the ref map twice: once
from the list of refs provided by the remote (as is currently done) and
potentially once from the new list of refs that the fetch mechanism
provides.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the new files fetch-negotiator.{h,c}, which contains an API
behind which the details of negotiation are abstracted. Currently, only
one algorithm is available: the existing one.
This patch is written to be easily reviewed: static functions are
moved verbatim from fetch-pack.c to negotiator/default.c, and it can be
seen that the lines replaced by negotiator->X() calls are present in the
X() functions respectively.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receiving 'ACK <object-id> continue' for a common commit, check if
the commit was already known to be common and mark it as such if not up
front. This should make future refactoring of how the information about
common commits is stored more straightforward.
No visible change intended.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the number of global variables by making the priority queue and
the count of non-common commits in it local, passing them as a struct to
various functions where necessary.
This also helps in the case that fetch_pack() is invoked twice in the
same process (when tag following is required when using a transport that
does not support tag following), in that different priority queues will
now be used in each invocation, instead of reusing the possibly
non-empty one.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In negotiation using protocol v2, fetch-pack sometimes does not make
full use of the information obtained in the ref advertisement:
specifically, that if the server advertises a commit that the client
also has, the client never needs to inform the server that it has the
commit's parents, since it can just tell the server that it has the
advertised commit and it knows that the server can and will infer the
rest.
This is because, in do_fetch_pack_v2(), rev_list_insert_ref_oid() is
invoked before mark_complete_and_common_ref(). This means that if we
have a commit that is both our ref and their ref, it would be enqueued
by rev_list_insert_ref_oid() as SEEN, and since it is thus already SEEN,
mark_complete_and_common_ref() would not enqueue it.
If mark_complete_and_common_ref() were invoked first, as it is in
do_fetch_pack() for protocol v0, then mark_complete_and_common_ref()
would enqueue it with COMMON_REF | SEEN. The addition of COMMON_REF
ensures that its parents are not sent as "have" lines.
Change the order in do_fetch_pack_v2() to be consistent with
do_fetch_pack(), and to avoid sending unnecessary "have" lines.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
