Introduce a new infrastructure to find and summarize changes in a single
string list, and rewrite wt_status_print_{updated,changed} functions using
it.
The goal of this change is to give more information on conflicted paths in
the status output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the users of "read_directory()" actually want a much simpler
interface than the whole complex (but rather powerful) one.
In fact 'git add' had already largely abstracted out the core interface
issues into a private "fill_directory()" function that was largely
applicable almost as-is to a number of callers. Yes, 'git add' wants to
do some extra work of its own, specific to the add semantics, but we can
easily split that out, and use the core as a generic function.
This function does exactly that, and now that much simplified
'fill_directory()' function can be shared with a number of callers,
while also ensuring that the rather more complex calling conventions of
read_directory() are used by fewer call-sites.
This also makes the 'common_prefix()' helper function private to dir.c,
since all callers are now in that file.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/parseopt-ls-files:
ls-files: fix broken --no-empty-directory
t3000: use test_cmp instead of diff
parse-opt: migrate builtin-ls-files.
Turn the flags in struct dir_struct into a single variable
Conflicts:
builtin-ls-files.c
t/t3000-ls-files-others.sh
By having flags represented as bits in the new member variable 'flags',
it will be easier to use parse_options when dir_struct is involved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the literal ANSI escape sequences and replace them by readable
constants.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now for the diff porcelain and the log family, we
call:
init_revisions();
setup_revisions();
DIFF_OPT_SET(ALLOW_TEXTCONV);
However, that means textconv will _always_ be on, instead of
being a default that can be manipulated with
setup_revisions. Instead, we want:
init_revisions();
DIFF_OPT_SET(ALLOW_TEXTCONV);
setup_revisions();
which is what this patch does.
We'll go ahead and move the callsite in wt-status, also;
even though the user can't pass any options here, it is a
cleanup that will help avoid any surprise later if the
setup_revisions line is changed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we can use the same "diff against empty tree" trick as
we do for the non-initial case, it is trivial to make this
work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we showed the initial commit, we had no reference to
diff against, so we went through the cache manually.
Nowadays, however, we have a virtual empty tree commit, so
we can simply diff against that to get the same results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This diff is meant for human consumption, so it makes sense
to apply text conversion here, as we would for the regular
diff porcelain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git status -v" shows a diff, we did not respect the
user's usual diff preferences at all. Loading just
git_diff_basic_config would give us things like rename
limits and diff drivers. But it makes even more sense to
load git_diff_ui_config, which gives us colorization if the
user has requested it.
Note that we need to take special care to cancel
colorization when writing to the commit template file, as
described in the code comments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "git status" display code was originally converted
to C, we copied the code from ls-files to discover whether a
pathname returned by read_directory was an "other", or
untracked, file.
Much later, 5698454e updated the code in ls-files to handle
some new cases caused by gitlinks. This left the code in
wt-status.c broken: it would display submodule directories
as untracked directories. Nobody noticed until now, however,
because unless status.showUntrackedFiles was set to "all",
submodule directories were not actually reported by
read_directory. So the bug was only triggered in the
presence of a submodule _and_ this config option.
This patch pulls the ls-files code into a new function,
cache_name_is_other, and uses it in both places. This should
leave the ls-files functionality the same and fix the bug
in status.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reorganize header generation so that all header text related to each
block is in one place.
This adds a function, but makes it easier to see what is generated in
each case. It also allows for easy tweaking of individual headers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/report-tracking:
branch -r -v: do not spit out garbage
stat_tracking_info(): clear object flags used during counting
git-branch -v: show the remote tracking statistics
git-status: show the remote tracking statistics
Refactor "tracking statistics" code used by "git checkout"
The function "config_error_nonbool", that is defined in "config.c",
is used to report an error when a config key in the config file
should have a corresponding value but it hasn't.
So the parameter to this function should be the key and not the
value, because the value is undefined. And it could crash if the
value is used.
This patches fixes two occurences where the value was passed
instead of the key.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "git status" to show the same remote tracking statistics
"git checkout" gives at the beginning of the output.
Now the necessary low-level machinery is properly factored out, we can do
this quite cleanly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new argument teaches Git to not look for any untracked files,
saving cycles on slow file systems, or large repos.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This lets you specify how you want untracked files to be listed.
The possible options are:
normal - Show untracked files and directories
all - Show all untracked files
The 'all' mode is used, if the mode is not specified.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This provides additional warning to users when attempting to
commit to a detached HEAD. It is configurable in color.status.nobranch.
Signed-off-by: Chris Parsons <chris@edendevelopment.co.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current rename limit default of 100 was arbitrarily
chosen. Testing[1] has shown that on modern hardware, a
limit of 200 adds about a second of computation time, and a
limit of 500 adds about 5 seconds of computation time.
This patch bumps the default limit to 200 for viewing diffs,
and to 500 for performing a merge. The limit for generating
git-status templates is set independently; we bump it up to
200 here, as well, to match the diff limit.
[1]: See <20080211113516.GB6344@coredump.intra.peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches 'git commit/status' show a new 'Modified submodules'
section, which is an output from:
git submodule summary --cached --for-status --summary-limit <limit>
just before the 'Untracked files' section.
The <limit> is given by the config variable status.submodulesummary
to limit the submodule summary size. status.submodulesummary is a
bool/int variable with value:
- false or 0 by default to disable the summary, or
- positive number to limit the summary size, or
- true or negative number to unlimit the summary size.
Also mention status.submodulesummary in the documentation.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now we can generate diff to a file descriptor, we do not have to
dup() the stdout around when writing the status output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move quote_path() from wt-status.c to quote.c and rename it as
quote_path_relative(), because it is a better name for a public function.
Also, instead of handcrafted quoting, quote_c_style_counted() is now used,
to make its quoting more consistent with the rest of the system, also
honoring core.quotepath specified in configuration.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
config: add test cases for empty value and no value config variables.
cvsimport: have default merge regex also match beginning of commit message
git clone -s documentation: force a new paragraph for the NOTE
status: suggest "git rm --cached" to unstage for initial commit
Protect get_author_ident_from_commit() from filenames in work tree
upload-pack: Initialize the exec-path.
bisect: use verbatim commit subject in the bisect log
git-cvsimport.txt: fix '-M' description.
Revert "pack-objects: only throw away data during memory pressure"
It makes no sense to suggest "git reset HEAD" since we have
no HEAD commit. This actually used to work but regressed in
f26a0012.
wt_status_print_cached_header was updated to take the whole
wt_status struct rather than just the reference field.
Previously the various code paths were sometimes sending in
s->reference and sometimes sending in NULL, making the
decision on whether this was an initial commit before we
even got to this function. Now we must check the initial
flag here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/in-core-index:
lazy index hashing
Create pathname-based hash-table lookup into index
read-cache.c: introduce is_racy_timestamp() helper
read-cache.c: fix a couple more CE_REMOVE conversion
Also use unpack_trees() in do_diff_cache()
Make run_diff_index() use unpack_trees(), not read_tree()
Avoid running lstat(2) on the same cache entry.
index: be careful when handling long names
Make on-disk index representation separate from in-core one
A plain "git commit" would still run lstat() a lot more than necessary,
because wt_status_print() would cause the index to be repeatedly flushed
and re-read by wt_read_cache(), and that would cause the CE_UPTODATE bit
to be lost, resulting in the files in the index being lstat'ed three
times each.
The reason why wt-status.c ended up invalidating and re-reading the
cache multiple times was that it uses "run_diff_index()", which in turn
uses "read_tree()" to populate the index with *both* the old index and
the tree we want to compare against.
So this patch re-writes run_diff_index() to not use read_tree(), but
instead use "unpack_trees()" to diff the index to a tree. That, in
turn, means that we don't need to modify the index itself, which then
means that we don't need to invalidate it and re-read it!
This, together with the lstat() optimizations, means that "git commit"
on the kernel tree really only needs to lstat() the index entries once.
That noticeably cuts down on the cached timings.
Best time before:
[torvalds@woody linux]$ time git commit > /dev/null
real 0m0.399s
user 0m0.232s
sys 0m0.164s
Best time after:
[torvalds@woody linux]$ time git commit > /dev/null
real 0m0.254s
user 0m0.140s
sys 0m0.112s
so it's a noticeable improvement in addition to being a nice conceptual
cleanup (it's really not that pretty that "run_diff_index()" dirties the
index!)
Doing an "strace -c" on it also shows that as it cuts the number of
lstat() calls by two thirds, it goes from being lstat()-limited to being
limited by getdents() (which is the readdir system call):
Before:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
60.69 0.000704 0 69230 31 lstat
23.62 0.000274 0 5522 getdents
8.36 0.000097 0 5508 2638 open
2.59 0.000030 0 2869 close
2.50 0.000029 0 274 write
1.47 0.000017 0 2844 fstat
After:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
45.17 0.000276 0 5522 getdents
26.51 0.000162 0 23112 31 lstat
19.80 0.000121 0 5503 2638 open
4.91 0.000030 0 2864 close
1.48 0.000020 0 274 write
1.34 0.000018 0 2844 fstat
...
It passes the test-suite for me, but this is another of one of those
really core functions, and certainly pretty subtle, so..
NOTE! The Linux lstat() system call is really quite cheap when everything
is cached, so the fact that this is quite noticeable on Linux is likely to
mean that it is *much* more noticeable on other operating systems. I bet
you'll see a much bigger performance improvement from this on Windows in
particular.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When recording a merge that conflicted and ends up in no changes after
manual resolution, commit callchain looked like this:
cmd_commit() ->
prepare_log_message() ->
run_status() ->
wt_status_print()
This invocation of run_status() is asked to find out if there is a
committable change, but it unconditionally gave instructions such as
"use git-add" at the same time. When in merge, we do allow an empty
change to be recorded, so after showing this message the code still went
ahead and made a commit.
This introduces "nowarn" parameter to run_status() to avoid these
useless messages. If we are not allowed to create an empty commit, we
already call run_status() again in the original codepath, and the
message will be shown from that call anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git-status was recently changed to output relative
paths. Setting this variable to false restores the old behavior for
any old-timers that prefer it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we are correctly removing leading prefixes from files in git
status, there is a degenerate case: the directory matching the prefix.
Because we show only the directory name for a directory that contains
only untracked files, it gets collapsed to an empty string.
Example:
$ git init
$ mkdir subdir
$ touch subdir/file
$ git status
...
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# subdir/
So far, so good.
$ cd subdir
$ git status
....
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
#
Oops, that's a bit confusing.
This patch prints './' to show that there is some output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds an option to help scripts find out color settings from
the configuration file.
git config --get-colorbool color.diff
inspects color.diff variable, and exits with status 0 (i.e. success) if
color is to be used. It exits with status 1 otherwise.
If a script wants "true"/"false" answer to the standard output of the
command, it can pass an additional boolean parameter to its command
line, telling if its standard output is a terminal, like this:
git config --get-colorbool color.diff true
When called like this, the command outputs "true" to its standard output
if color is to be used (i.e. "color.diff" says "always", "auto", or
"true"), and "false" otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
The code tries to collapse identical leading components
between the prefix and the path. So if we're in "dir1", the
path "dir1/file" should become just "file". However, we were
ending up with "../dir1/file". The included test expected
the wrong output.
The "len" parameter to quote_path can be negative to mean
"this is a NUL terminated string". Simply count it so that
the loop can rely on it being the length of the path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_diff_index() and the entire diff machinery is hard coded to output
to stdout, so just redirect that and restore it when done.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To show the relative paths, the function formerly called quote_crlf()
(now called quote_path()) takes the prefix as an additional argument.
While at it, the static buffers were replaced by strbufs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We still default to get_index_file(), but this can be overridden
by setting wt_status.index_file after calling wt_status_prepare().
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Still defaults to stdout, but you can now override wt_status.fp after
calling wt_status_prepare().
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds more proper rename detection limits. Instead of just checking
the limit against the number of potential rename destinations, we verify
that the rename matrix (which is what really matters) doesn't grow
ridiculously large, and we also make sure that we don't overflow when
doing the matrix size calculation.
This also changes the default limits from unlimited, to a rename matrix
that is limited to 100 entries on a side. You can raise it with the config
entry, or by using the "-l<n>" command line flag, but at least the default
is now a sane number that avoids spending lots of time (and memory) in
situations that likely don't merit it.
The choice of default value is of course very debatable. Limiting the
rename matrix to a 100x100 size will mean that even if you have just one
obvious rename, but you also create (or delete) 10,000 files, the rename
matrix will be so big that we disable the heuristics. Sounds reasonable to
me, but let's see if people hit this (and, perhaps more importantly,
actually *care*) in real life.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
