A common use of "cat-file --batch-check" is to feed a list
of objects from "rev-list --objects" or a similar command.
In this instance, all of our input objects are 40-byte sha1
ids. However, cat-file has always allowed arbitrary revision
specifiers, and feeds the result to get_sha1().
Fortunately, get_sha1() recognizes a 40-byte sha1 before
doing any hard work trying to look up refs, meaning this
scenario should end up spending very little time converting
the input into an object sha1. However, since 798c35f
(get_sha1: warn about full or short object names that look
like refs, 2013-05-29), when we encounter this case, we
spend the extra effort to do a refname lookup anyway, just
to print a warning. This is further exacerbated by ca91993
(get_packed_ref_cache: reload packed-refs file when it
changes, 2013-06-20), which makes individual ref lookup more
expensive by requiring a stat() of the packed-refs file for
each missing ref.
With no patches, this is the time it takes to run:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectname)' <objects
on the linux.git repository:
real 1m13.494s
user 0m25.924s
sys 0m47.532s
If we revert ca91993, the packed-refs up-to-date check, it
gets a little better:
real 0m54.697s
user 0m21.692s
sys 0m32.916s
but we are still spending quite a bit of time on ref lookup
(and we would not want to revert that patch, anyway, which
has correctness issues). If we revert 798c35f, disabling
the warning entirely, we get a much more reasonable time:
real 0m7.452s
user 0m6.836s
sys 0m0.608s
This patch does the moral equivalent of this final case (and
gets similar speedups). We introduce a global flag that
callers of get_sha1() can use to avoid paying the price for
the warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test that should have failed but didn't revealed a bug that needs
to be corrected.
* jc/t1512-fix:
get_short_sha1(): correctly disambiguate type-limited abbreviation
t1512: correct leftover constants from earlier edition
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test in t1512 that expects a failure incorrectly passed. The
test prepares a commit whose object name begins with ten "0"s, and
also prepares a tag that points at the commit. The object name of
the tag also begins with ten "0"s. There is no other commit-ish
object in the repository whose name begins with such a prefix.
Ideally, in such a repository:
$ git rev-parse --verify 0000000000^{commit}
should yield that commit. If 0000000000 is taken as the commit
0000000000e4f, peeling it to a commmit yields that commit itself,
and if 0000000000 is taken as the tag 0000000000f8f, peeling it to a
commit also yields the same commit, so in that twisted sense, the
extended SHA-1 expression 0000000000^{commit} is unambigous. The
test that expects a failure is to check the above command.
The reason the test expects a failure is that we did not implement
such a "unification" of two candidate objects. What we did (or at
least, meant to) implement was to recognise that a commit-ish is
required to expand 0000000000, and notice that there are two succh
commit-ish, and diagnose the request as ambiguous.
However, there was a bug in the logic to check the candidate
objects. When the code saw 0000000000f8f (a tag) that shared the
shortened prefix (ten "0"s), it tried to make sure that the tag is a
commit-ish by looking at the tag object. Because it incorrectly
used lookup_object() when the tag has not been parsed, however, we
incorrectly declared that the tag is _not_ a commit-ish, leaving the
sole commit in the repository, 0000000000e4f, that has the required
prefix as "unique match", causing the test to pass when it shouldn't.
This fixes the logic to inspect the type of the object a tag refers
to, to make the test that is expected to fail correctly fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd <name>", when <name> happens to be a 40-hex string,
directly uses the 40-hex string as an object name, even if a ref
"refs/<some hierarchy>/<name>" exists. This disambiguation order
is unlikely to change, but we should warn about the ambiguity just
like we warn when more than one refs/ hierachies share the same
name.
* nd/warn-ambiguous-object-name:
get_sha1: warn about full or short object names that look like refs
When a reflog notation is used for implicit "current branch", we
did not say which branch and worse said "branch ''".
* rr/die-on-missing-upstream:
sha1_name: fix error message for @{<N>}, @{<date>}
sha1_name: fix error message for @{u}
Currently, when we try to resolve @{<N>} or @{<date>} when the reflog
doesn't go back far enough, we get errors like:
# on branch master
$ git show @{10000}
fatal: Log for '' only has 7 entries.
$ git show @{10000.days.ago}
warning: Log for '' only goes back to Tue, 21 May 2013 14:14:45 +0530.
...
# detached HEAD case
$ git show @{10000}
fatal: Log for '' only has 2005 entries.
$ git show master@{10000}
fatal: Log for 'master' only has 7 entries.
The empty string '' is confusing and does not convey information
about whose logs we are inspecting. Change this so that we get:
# on branch master
$ git show @{10000}
fatal: Log for 'master' only has 7 entries.
$ git show @{10000.days.ago}
warning: Log for 'master' only goes back to Tue, 21 May 2013 14:14:45 +0530.
...
# detached HEAD case
$ git show @{10000}
fatal: Log for 'HEAD' only has 2005 entries.
$ git show master@{10000}
fatal: Log for 'master' only has 7 entries.
Also one of the message strings given to die() now points into
real_ref that was not used in that fashion, so stop freeing the
underlying storage for it.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Bug-spotted-and-fixed-by: Thomas Rast
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get 40 hex digits, we immediately assume it's an SHA-1. This
is the right thing to do because we have no way else to specify an
object. If there is a ref with the same object name, it will be
ignored. Warn the user about this case because the ref with full
object name is likely a mistake, for example
git checkout -b $empty_var $(git rev-parse something)
advice.object_name_warning is not documented because frankly people
should not be aware about it until they encounter this situation.
While at there, warn about ambiguation with abbreviated SHA-1 too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when no (valid) upstream is configured for a branch, you get
an error like:
$ git show @{u}
error: No upstream configured for branch 'upstream-error'
error: No upstream configured for branch 'upstream-error'
fatal: ambiguous argument '@{u}': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
The "error: " line actually appears twice, and the rest of the error
message is useless. In sha1_name.c:interpret_branch_name(), there is
really no point in processing further if @{u} couldn't be resolved, and
we might as well die() instead of returning an error(). After making
this change, you get:
$ git show @{u}
fatal: No upstream configured for branch 'upstream-error'
Also tweak a few tests in t1507 to expect this output.
This only turns error() that may be called after we know we are
dealing with an @{upstream} marker into die(), without touching
silent error returns "return -1" from the function. Any caller that
wants to handle an error condition itself will not be hurt by this
change, unless they want to see the message from error() and then
exit silently without giving its own message, which needs to be
fixed anyway.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you were on 'frotz' branch before you checked out your current
branch, "git merge @{-1}~22" means the same as "git merge frotz~22".
The strbuf_branchname() function, when interpret_branch_name() gives
up resolving "@{-1}~22" fully, returns "frotz" and tells the caller
that it only resolved "@{-1}" part of the input, mistakes this as a
total failure, and appends the whole thing to the result, yielding
"frotz@{-1}~22", which does not make any sense.
Inspect the return value from interpret_branch_name() a bit more
carefully. When it errored out without consuming anything, we will
get -1 and we should return the whole thing. Otherwise, we should
append the remainder (i.e. "~22" in the earlier example) to the
partially resolved name (i.e. "frotz").
The test suite adds enough number of checkout to make @{-12} in the
last test in t0100 that tried to check "we haven't flipped branches
that many times" error case succeed; raise the number to a hundred.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And restructure the if/else to factor out the common "is len positive?"
test into a single conditional.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code essentially replaces part of ref with another ref, for example
'@{-1}@{u}' is replaced with 'master@{u}', but this can be reused for
other purposes other than nth prior checkouts.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's trivial to check for them in the @{N} parsing loop.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Through the years the functionality to handle @{-N} and @{u} has moved
around the code, and as a result, code that once made sense, doesn't any
more.
There is no need to call this function recursively with the branch of
@{-N} substituted because dwim_{ref,log} already replaces it.
However, there's one corner-case where @{-N} resolves to a detached
HEAD, in which case we wouldn't get any ref back.
So we parse the nth-prior manually, and deal with it depending on
whether it's a SHA-1, or a ref.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The @-parsing loop unnecessarily checks for the sequence "@{" from
(len - 2) unnecessarily. We can safely check from (len - 4).
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'at' is always 0, since we can reach this point only if
!len && reflog_len, and len=at when reflog is assigned.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no good way to ask "I have a random string that came from
outside world. I want to turn it into a 40-hex object name while
making sure such an object exists". A new peeling suffix ^{object}
can be used for that purpose, together with "rev-parse --verify".
* jc/sha1-name-object-peeler:
peel_onion(): teach $foo^{object} peeler
peel_onion: disambiguate to favor tree-ish when we know we want a tree-ish
A string that names an object can be suffixed with ^{type} peeler to
say "I have this object name; peel it until you get this type. If
you cannot do so, it is an error". v1.8.2^{commit} asks for a commit
that is pointed at an annotated tag v1.8.2; v1.8.2^{tree} unwraps it
further to the top-level tree object. A special suffix ^{} (i.e. no
type specified) means "I do not care what it unwraps to; just peel
annotated tag until you get something that is not a tag".
When you have a random user-supplied string, you can turn it to a
bare 40-hex object name, and cause it to error out if such an object
does not exist, with:
git rev-parse --verify "$userstring^{}"
for most objects, but this does not yield the tag object name when
$userstring refers to an annotated tag.
Introduce a new suffix, ^{object}, that only makes sure the given
name refers to an existing object. Then
git rev-parse --verify "$userstring^{object}"
becomes a way to make sure $userstring refers to an existing object.
This is necessary because the plumbing "rev-parse --verify" is only
about "make sure the argument is something we can feed to get_sha1()
and turn it into a raw 20-byte object name SHA-1" and is not about
"make sure that 20-byte object name SHA-1 refers to an object that
exists in our object store". When the given $userstring is already
a 40-hex, by definition "rev-parse --verify $userstring" can turn it
into a raw 20-byte object name. With "$userstring^{object}", we can
make sure that the 40-hex string names an object that exists in our
object store before "--verify" kicks in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function already knows when interpreting $foo^{commit} to tell
the underlying get_sha1_1() to expect a commit-ish while evaluating
$foo. Teach it to do the same when asked for $foo^{tree}; we are
expecting a tree-ish and $foo should be disambiguated in favor of a
tree-ish, discarding a possible ambiguous match with a blob object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An internal function used to implement "git checkout @{-1}" was
hard to use correctly.
* jc/reflog-reverse-walk:
refs.c: fix fread error handling
reflog: add for_each_reflog_ent_reverse() API
for_each_recent_reflog_ent(): simplify opening of a reflog file
for_each_reflog_ent(): extract a helper to process a single entry
The only caller of diagnose_invalid_sha1_path() extracts a substring from
an object name by creating a NUL-terminated copy of the interesting part.
Add a length parameter to the function and thus avoid the need for an
allocation, thereby simplifying the code.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -" is a short-hand for "git checkout @{-1}" and the
"@{nth}" notation for a negative number is to find nth previous
checkout in the reflog of the HEAD to determine the name of the
branch the user was on. We would want to find the nth most recent
reflog entry that matches "checkout: moving from X to Y" for this.
Unfortunately, reflog is implemented as an append-only file, and the
API to iterate over its entries, for_each_reflog_ent(), reads the
file in order, giving the entries from the oldest to newer. For the
purpose of finding nth most recent one, this API forces us to record
the last n entries in a rotating buffer and give the result out only
after we read everything. To optimize for a common case of finding
the nth most recent one for a small value of n, we also have a side
API for_each_recent_reflog_ent() that starts reading near the end of
the file, but it still has to read the entries in the "wrong" order.
The implementation of understanding @{-1} uses this interface.
This all becomes unnecessary if we add an API to let us iterate over
reflog entries in the reverse order, from the newest to older.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
The new option allows you to feed an ambiguous prefix and enumerate
all the objects that share it as a prefix of their object names.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the revision parser that in "$name:$path" (used for a
blob object name), "$name" must be a tree-ish.
There are many more places where we know what types of objects are
called for. This patch adds support for "commit", "treeish", "tree",
and "blob", which could be used in the following contexts:
- "git apply --build-fake-ancestor" reads the "index" lines from
the patch; they must name blob objects (not even "blob-ish");
- "git commit-tree" reads a tree object name (not "tree-ish"), and
zero or more commit object names (not "committish");
- "git reset $rev" wants a committish; "git reset $rev -- $path"
wants a treeish.
They will come in later patches in the series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers know that the user meant to name a committish by
syntactical positions where the object name appears. Calling this
function allows the machinery to disambiguate shorter-than-unique
abbreviated object names between committish and others.
Note that this does NOT error out when the named object is not a
committish. It is merely to give a hint to the disambiguation
machinery.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes user input string and returns the object name
(binary SHA-1) with mode bits and path when the object was looked
up in a tree.
Additionally give hints to help disambiguation of abbreviated object
names when the caller knows what it is looking for.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We know that the token "$name" that appear in "$name^{commit}",
"$name^4", "$name~4" etc. can only name a committish (either a
commit or a tag that peels to a commit). Teach get_short_sha1() to
take advantage of that knowledge when disambiguating an abbreviated
SHA-1 given as an object name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to pass the disambiguation hints from the caller down the
callchain. Nothing is changed in this step, as everybody just
passes 0 in the flag.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach get_describe_name() to pass the disambiguation hint down the
callchain to get_short_sha1().
Also add tests to show various syntactic elements that we could take
advantage of the object type information to help disambiguration of
abbreviated object names. Many of them are marked as broken, and
some of them will be fixed in later patches in this series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the caller knows that the parameter is meant to name a commit,
e.g. "56789a" in describe name "v1.2.3-4-g56789a", pass that as a
hint so that lower level can use it to disambiguate objects when
there is only one commit whose name begins with 56789a even if there
are objects of other types whose names share the same prefix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of a separate "int quietly" argument, make it take "unsigned
flags" so that we can pass other options to it.
The bit assignment of this flag word is exposed in cache.h because
the mechanism will be exposed to callers of the higher layer in
later commits in this series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In finish_object_disambiguation(), if the candidate hasn't been
checked, there are two cases:
- It is the first and only object that match the prefix; or
- It replaced another object that matched the prefix but that
object did not satisfy ds->fn() callback.
And the former case we set ds->candidate_ok to true without doing
anything else, while for the latter we check the candidate, which
may set ds->candidate_ok to false.
At this point in the code, ds->candidate_ok can be false only if
this last-round check found that the candidate does not pass the
check, because the state after update_candidates() returns cannot
satisfy
!ds->ambiguous && ds->candidate_exists && ds->candidate_checked
and !ds->canidate_ok at the same time.
Hence, when we execute this "return", we know we have seen more than
one object that match the prefix (and none of them satisfied ds->fn),
meaning that we should say "the short name is ambiguous", not "there
is no object that matches the prefix".
Noticed by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to find zero, one or more matches from loose objects and
packed objects independently and then decide if the given short
object name is unique across them.
Instead, introduce a "struct disambiguate_state" that keeps track of
what we have found so far, that can be one of:
- We have seen one object that _could_ be what we are looking for;
- We have also checked that object for additional constraints (if any),
and found that the object satisfies it;
- We have also checked that object for additional constraints (if any),
and found that the object does not satisfy it; or
- We have seen more than one objects that satisfy the constraints.
and pass it to the enumeration functions for loose and packed
objects. The disambiguation state can optionally take a callback
function that takes a candidate object name and reports if the
object satisifies additional criteria (e.g. when the caller knows
that the short name must refer to a commit, this mechanism can be
used to check the type of the given object).
Compared to the earlier attempt, this round avoids the optional
check if there is only one candidate that matches the short name in
the first place.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are hexadecimal and binary representation of the short object
name given to the callchain as its input. Rename them with _pfx
suffix to make it clear they are prefixes, and call them hex and bin
respectively.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the logic to find object(s) that match a given prefix inside
a single pack into a separate helper function, and give it a bit more
comment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable points at the element we are currently looking at, and
does not have anything to do with the current time which the name
"now" implies.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only two callers, and they will benefit from being able to
pass disambiguation hints to underlying get_sha1_with_context() API
once it happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only external caller is setup.c that tries to give a nicer error
message when an object name is misspelt (e.g. "HEAD:cashe.h").
Retire it and give the caller a dedicated and more intuitive API
function maybe_die_on_misspelt_object_name().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diagnose_invalid_sha1_path() is meant to be called to diagnose a
misspelt <treeish>:<pathname> when <pathname> does not exist in
<treeish>. However, the code may call it if <treeish>:<pathname> is
invalid (which triggers another call with only_to_die == 1), but for
another reason. This happens when calling e.g.
git log existing-file HEAD:existing-file
because existing-file is a path and not a revision, the code
verifies that the arguments that follow to be paths. This leads to
an incorrect message like "existing-file does not exist in HEAD",
even though the path exists in HEAD.
Check that the search for <pathname> in <treeish> fails before
triggering the diagnosis.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the branch configured as upstream didn't have a local tracking
branch, git said "Upstream branch not found". We can be more helpful,
and separate the cases when upstream is not configured, and when it is
configured, but the upstream branch is not tracked in a local branch.
The following configuration leads to the second scenario:
[remote "origin"]
url = ...
fetch = refs/heads/master
[branch "master"]
remote = origin
merge = refs/heads/master
'git pull' will work on master, but master@{upstream} is not defined.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just saying that no upstream exists for such branch,
which is true but not very helpful, check that there's no
refs/heads/barnhc_wiht_tpyo and tell it to the user.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using @{u} or @{upstream} it is common to omit the branch name,
implying current branch. If the upstream is not configured, the error
message was "No upstream branch found for ''".
When resolving '@{u}', branch_get() is called, which almost always
returns a description of a branch. This allows us to use a branch name
in the error message, even if the user said something like '@{u}'.
The only case when branch_get() returns NULL is when HEAD points to so
something which is not a branch. Of course this also means that no
upstream is configured, but it is better to directly say that HEAD
does not point to a branch.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/broken-ref-dwim-fix:
resolve_ref(): report breakage to the caller without warning
resolve_ref(): expose REF_ISBROKEN flag
refs.c: move dwim_ref()/dwim_log() from sha1_name.c
Both dwim_ref()/dwim_log() functions are intimately related to the ref
parsing rules defined in refs.c and better fits there. Move them together
with substitute_branch_name(), a file scope static helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/check-ref-format-3: (23 commits)
add_ref(): verify that the refname is formatted correctly
resolve_ref(): expand documentation
resolve_ref(): also treat a too-long SHA1 as invalid
resolve_ref(): emit warnings for improperly-formatted references
resolve_ref(): verify that the input refname has the right format
remote: avoid passing NULL to read_ref()
remote: use xstrdup() instead of strdup()
resolve_ref(): do not follow incorrectly-formatted symbolic refs
resolve_ref(): extract a function get_packed_ref()
resolve_ref(): turn buffer into a proper string as soon as possible
resolve_ref(): only follow a symlink that contains a valid, normalized refname
resolve_ref(): use prefixcmp()
resolve_ref(): explicitly fail if a symlink is not readable
Change check_refname_format() to reject unnormalized refnames
Inline function refname_format_print()
Make collapse_slashes() allocate memory for its result
Do not allow ".lock" at the end of any refname component
Refactor check_refname_format()
Change check_ref_format() to take a flags argument
Change bad_ref_char() to return a boolean value
...
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It probably is not such a good idea to use ":/<pattern>" to specify which
commit to merge, as ":/<pattern>" can often hit unexpected commits, but
somebody tried it and got a nonsense error message:
fatal: ':/Foo bar' does not point to a commit
So here is a for-the-sake-of-consistency update that is fairly useless
that allows users to carefully try not shooting in the foot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/magic-pathspec:
setup.c: Fix some "symbol not declared" sparse warnings
t3703: Skip tests using directory name ":" on Windows
revision.c: leave a note for "a lone :" enhancement
t3703, t4208: add test cases for magic pathspec
rev/path disambiguation: further restrict "misspelled index entry" diag
fix overslow :/no-such-string-ever-existed diagnostics
fix overstrict :<path> diagnosis
grep: use get_pathspec() correctly
pathspec: drop "lone : means no pathspec" from get_pathspec()
Revert "magic pathspec: add ":(icase)path" to match case insensitively"
magic pathspec: add ":(icase)path" to match case insensitively
magic pathspec: futureproof shorthand form
magic pathspec: add tentative ":/path/from/top/level" pathspec support
"git cmd :/no-such-string-ever-existed" runs an extra round of get_sha1()
since 009fee4 (Detailed diagnosis when parsing an object name fails.,
2009-12-07). Once without error diagnosis to see there is no commit with
such a string in the log message (hence "it cannot be a ref"), and after
seeing that :/no-such-string-ever-existed is not a filename (hence "it
cannot be a path, either"), another time to give "better diagnosis".
The thing is, the second time it runs, we already know that traversing the
history all the way down to the root will _not_ find any matching commit.
Rename misguided "gently" parameter, which is turned off _only_ when the
"detailed diagnosis" codepath knows that it cannot be a ref and making the
call only for the caller to die with a message. Flip its meaning (and
adjust the callers) and call it "only_to_die", which is not a great name,
but it describes far more clearly what the codepaths that switches their
behaviour based on this variable do.
On my box, the command spends ~1.8 seconds without the patch to make the
report; with the patch it spends ~1.12 seconds.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given "git log :", we get a disambiguation message that tries to be
helpful and yet totally misses the point, i.e.
$ git log :
fatal: Path '' does not exist (neither on disk nor in the index).
$ git log :/
fatal: Path '/' exists on disk, but not in the index.
An empty path nor anything that begins with '/' cannot possibly in the
index, and it is wrong to guess that the user might have meant to access
such an index entry.
It should yield the same error message as "git log '*.c'", i.e.
$ git log '*.c'
fatal: ambiguous argument '*.c': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the "Did you mean..." message suggests "commit:fullpath"
only. Extend this to show the more convenient "commit:./file" form also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 72a5b561fc, as adding
fixed number of hexdigits more than necessary to make one object name
locally unique does not help in futureproofing the uniqueness of names
we generate today.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/oneline-sha1-name-from-specific-ref:
get_sha1: handle special case $commit^{/}
get_sha1: support $commit^{/regex} syntax
get_sha1_oneline: make callers prepare the commit list to traverse
get_sha1_oneline: fix lifespan rule of temp_commit_buffer variable
Empty regex pattern should always match. But the exact behavior of
regexec() may vary. Because it always matches anyway, we can just
return 'matched' without calling regex machinery.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/extended-sha1-relpath:
get_sha1: teach ":$n:<path>" the same relative path logic
get_sha1: support relative path ":path" syntax
Make prefix_path() return char* without const
Conflicts:
sha1_name.c
This works like ":/regex" syntax that finds a recently created commit
starting from all refs, but limits the discovery to those reachable from
the named commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This gives callers more control, i.e. which ref will be searched from.
They must prepare the list ordered by committer date.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is trying to free only what we ourselves read (as opposed to what
we borrowed from commit->buffer) but do so lazily only to work around
the fact that the code has many irregular exit points, and doing it right
makes it necessary to call free() from many different places in the loop.
Rewrite the structure of the code inside the loop so that the variable
has to live within a single iteration, ever. This should make the logic
easier to follow as well.
Also we didn't free a temporary commit list we kept to hold the original
set of commits. Free it.
Noticed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We taught the object name parser to take ":./<path>", ":../<path>", etc.
and understand them to be relative to the current working directory.
Given that ":<path>" is just a short-hand for ":0:<path>" (i.e. "take
stage #0 of that path"), we should allow ":$n:<path>" to interpret them
the same way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently :path and ref:path can be used to refer to a specific object
in index or ref respectively. "path" component is absolute path. This
patch allows "path" to be written as "./path" or "../path", which is
relative to user's original cwd.
This does not work in commands for which startup_info is NULL
(i.e. non-builtin ones, it seems none of them needs this anyway).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
Add commit_list prefix to insert_by_date function and to sort_by_date,
so it's clear that these functions refer to commit_list structure.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_branchname is a thin wrapper around interpret_branch_name
from sha1_name.o. Most strbuf.o users do not need it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though git makes sure that it uses enough hexdigits to show an
abbreviated object name unambiguously, as more objects are added to the
repository over time, a short name that used to be unique will stop being
unique. Git uses this many extra hexdigits that are more than necessary
to make the object name currently unique, in the hope that its output will
stay unique a bit longer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation in revisions.txt did not match the implementation, and
the comment in sha1_name.c was incomplete.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-reflog-beyond-horizon:
t1503: fix broken test_must_fail calls
rev-parse: tests git rev-parse --verify master@{n}, for various n
sha1_name.c: use warning in preference to fprintf(stderr
rev-parse: exit with non-zero status if ref@{n} is not valid.
This commit changes sha1_name.c to use warning instead of
fprintf(stderr).
Trailing newlines from message formats have been removed
since warning adds one itself.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"The current behaviour of ref@{...} syntax parser is suboptimal:
$ git rev-parse --verify jch@{99999} && echo true
warning: Log for 'jch' only has 1368 entries.
cfb88e9a8d
true
It even knows that it is running off the cut-off point; it should just
cause the caller to notice that fact. I don't think changing it to error
out should cause any harm to existing callers."
With this change:
$ git rev-parse --verify jch@{99999} || echo false
fatal: Log for 'jch' only has 1368 entries.
false
$ git rev-parse jch@{99999} || echo false
fatal: Log for 'jch' only has 1368 entries.
false
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parser tried to clean up the object flags it used while finding
commits with matching string, but was not doing a very good job at it.
This caused "checkout -b new ':/token'", which internally tries to parse
':/token' twice as an object name, to fail when the commit in question
was reachable from only one ref.
The mask bits given to pop_most_recent_commit(&list, MASK) means "I have
already been on the list to be processed, so please do not place me again
even if I am found to be a parent of some other commit on the list." So
mark them when we add them to the list at the beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cp/textconv-cat-file:
git-cat-file.txt: Document --textconv
t/t8007: test textconv support for cat-file
textconv: support for cat_file
sha1_name: add get_sha1_with_context()
Textconv is defined by the diff driver, which is associated with a pathname,
not a blob. This fonction permits to know the context for the sha1 you're
looking for, especially his pathname
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also makes it trigger anywhere in the commit message, rather than
just at the beginning. Which tends to be a lot more useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to see if user input "git show :path" makes sense tried to access
the index without properly checking the array bound.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
If we encounter a symref that is dangling, in most cases we will warn
about it. The one exception is a dangling HEAD, as that indicates a
branch yet to be born.
However, the check in dwim_ref was not quite right. If we were fed
something like "HEAD^0" we would try to resolve "HEAD", see that it is
dangling, and then check whether the _original_ string we got was
"HEAD" (which it wasn't in this case). And that makes no sense; the
dangling thing we found was not "HEAD^0" but rather "HEAD".
Fixing this squelches a scary warning from "submodule summary HEAD" (and
consequently "git status" with status.submodulesummary set) in an empty
repo, as the submodule script calls "git rev-parse -q --verify HEAD^0".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Something like foo@{-1} is nonsensical, as the @{-N} syntax
is reserved for "the Nth last branch", and is not an actual
reflog selector. We should not feed such nonsense to
approxidate at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously interpret_branch_name would see @{-1} and stop
parsing, leaving the @{u} as cruft that provoked an error.
Instead, we should recurse if there is more to parse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
The caller will say "It is not a valid object name" if it wants to, and
some callers may even try to see if it names an object and otherwise try to
see if it is a path.
Pointed out by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a long time, the time based reflog syntax (e.g. master@{yesterday})
didn't complain when the "human readable" timestamp was misspelled, as
the underlying mechanism tried to be as lenient as possible. The funny
thing was that parsing of "@{now}" even relied on the fact that anything
not recognized by the machinery returned the current timestamp.
Introduce approxidate_careful() that takes an optional pointer to an
integer, that gets assigned 1 when the input does not make sense as a
timestamp.
As I am too lazy to fix all the callers that use approxidate(), most of
the callers do not take advantage of the error checking, but convert the
code to parse reflog to use it as a demonstration.
Tests are mostly from Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches @{upstream} syntax to interpret_branch_name(), instead
of dwim_ref() machinery.
There are places in git UI that behaves differently when you give a local
branch name and when you give an extended SHA-1 expression that evaluates
to the commit object name at the tip of the branch. The intent is that
the special syntax such as @{-1} can stand in as if the user spelled the
name of the branch in such places.
The name of the branch "frotz" to switch to ("git checkout frotz"), and
the name of the branch "nitfol" to fork a new branch "frotz" from ("git
checkout -b frotz nitfol"), are examples of such places. These places
take only the name of the branch (e.g. "frotz"), and they are supposed to
act differently to an equivalent refname (e.g. "refs/heads/frotz"), so
hooking the @{upstream} and @{-N} syntax to dwim_ref() is insufficient
when we want to deal with cases a local branch is forked from another
local branch and use "forked@{upstream}" to name the forkee branch.
The "upstream" syntax "forked@{u}" is to specify the ref that "forked" is
configured to merge with, and most often the forkee is a remote tracking
branch, not a local branch. We cannot simply return a local branch name,
but that does not necessarily mean we have to returns the full refname
(e.g. refs/remotes/origin/frotz, when returning origin/frotz is enough).
This update calls shorten_unambiguous_ref() to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
A new notation '<branch>@{upstream}' refers to the branch <branch> is set
to build on top of. Missing <branch> (i.e. '@{upstream}') defaults to the
current branch.
This allows you to run, for example,
for l in list of local branches
do
git log --oneline --left-right $l...$l@{upstream}
done
to inspect each of the local branches you are interested in for the
divergence from its upstream.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous error message was the same in many situations (unknown
revision or path not in the working tree). We try to help the user as
much as possible to understand the error, especially with the
sha1:filename notation. In this case, we say whether the sha1 or the
filename is problematic, and diagnose the confusion between
relative-to-root and relative-to-$PWD confusion precisely.
The 7 new error messages are tested.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When flipping commits around on topic branches, I often end up doing
this sequence:
* Run "log --oneline next..jc/frotz" to find out the first commit
on 'jc/frotz' branch not yet merged to 'next';
* Run "checkout $that_commit^" to detach HEAD to the parent of it;
* Rebuild the series on top of that commit; and
* "show-branch jc/frotz HEAD" and "diff jc/frotz HEAD" to verify.
Introduce a new syntax to "git checkout" to name the commit to switch to,
to make the first two steps easier. When the branch to switch to is
specified as A...B (you can omit either A or B but not both, and HEAD
is used instead of the omitted side), the merge base between these two
commits are computed, and if there is one unique one, we detach the HEAD
at that commit.
With this, I can say "checkout next...jc/frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fall back to a standard for_each_reflog_ent() after failing to find
the nth branch switch (or if we had a short reflog) with the call to
for_each_recent_reflog_ent(), we do not need to free the memory allocated
for our strbuf's since a strbuf_reset() will be performed in
grab_nth_branch_switch() before assigning to the entry.
Plus, the strbuf_release() negates the non-zero hint we initially gave to
strbuf_init() just above these lines.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These allow you to say "git checkout @{-2}" to switch to the branch two
"branch switching" ago by pretending as if you typed the name of that
branch. As it is likely that we will be introducing more short-hands to
write the name of a branch without writing it explicitly, rename the
functions from "nth_last_branch" to more generic "branch_name", to prepare
for different semantics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
057e713 (Warn use of "origin" when remotes/origin/HEAD is dangling,
2009-02-08) tried to warn dangling refs/remotes/origin/HEAD only when
"origin" was used to refer to it. There was one corner case a symref is
expected to be dangling and this warning is unwarranted: HEAD in an empty
repository.
This squelches the warning for this special case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one squelched the diagnositic message we used to issue every
time we enumerated the refs and noticed a dangling ref. This adds the
warning back to the place where the user actually attempts to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get_sha1_basic() is passed a buffer of len 0, it should not
check if buf[len-1] is a curly bracket.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only accept "checkout: moving from A to B" newer style reflog entries,
in order to pick up A. There is no point computing where B begins at
after running strstr to locate " to ", nor adding 4 and then subtracting 4
from the same pointer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to scan only the last few kilobytes of a reflog, as a
cheap optimization when the data you are looking for is likely to be
found near the end of it. The caller is expected to fall back to the
full scan if that is not the case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To do that, Git no longer looks forward for the '@{' corresponding to the
closing '}' but backward, and dwim_ref() as well as dwim_log() learnt
about the @{-<N>} notation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can have quite a many reflog entries, but you typically won't recall
which branch you were on after switching branches for more than several
times.
Instead of reading the reflog twice, this reads the branch switching event
and keeps as many entries as the user asked from the latest such entries,
which is the minimum required to be able to switch back to the branch we
were recently on.
[jc: improvements from Dscho squashed in]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let get_sha1() parse the @{-N} syntax, with docs and tests.
Note that while @{-1}^2, @{-2}~5 and such are supported, @{-1}@{1} is
currently not allowed.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the lookup only look at "interesting" checkouts, meaning those
that tell you "Already on ..." don't count even though they also cause
a reflog entry.
Let interpret_nth_last_branch() return the number of characters
parsed, so that git-checkout can verify that the branch spec was
@{-N}, not @{-1}^2 or something like that. (The latter will be added
later.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement a shortcut @{-N} for the N-th last branch checked out, that
works by parsing the reflog for the message added by previous
git-checkout invocations. We expand the @{-N} to the branch name, so
that you end up on an attached HEAD on that branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/maint-mksnpath:
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Otherwise the function sometimes fail to resolve obviously correct
refnames, because the string data pointed to by "str" argument were
reused.
The change in dwim_log does not fix anything, just optimizes away
strcpy code as the path can be created directly in the available
buffer.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we support seconds-since-epoch in $GIT_COMMITTER_TIME we should
also support it in a reflog @{...} style notation. We can easily
tell this part from @{nth} style notation by looking to see if the
value is unreasonably large for an @{nth} style notation.
The value 100000000 was chosen as it is already used by date.c to
disambiguate yyyymmdd format from a seconds-since-epoch time value.
A reflog with 100,000,000 record entries is also simply not valid.
Such a reflog would require at least 7.7 GB to store just the old
and new SHA-1 values. So our randomly chosen upper limit for @{nth}
notation is "big enough".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f2eba66 (Enable HEAD@{...} and make it independent from the current
branch, 2007-02-03) introduced dwim_log() to handle <refname>@{...}
syntax, and as part of its processing, it checks if the ref exists by
calling refsolve_ref(). It should call it as a reader to make sure the
call returns NULL for a nonexistent ref (not as a potential writer in
which case it does not return NULL).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In get_sha1_basic, we parse a string like
HEAD@{10 seconds ago}:path/to/file
into its constituent ref, reflog date, and path components.
We never actually munge the string itself, but instead keep
offsets into the string with their associated lengths.
When we call approxidate on the contents inside braces,
however, we pass just a string without a length. This means
that approxidate could sometimes look past the closing brace
and (erroneously) interpret the rest of the string as part
of the date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
I think it would make more sense for rev~ to have the same guarantees that
rev^ has, namely to always return a commit. I would also suggest that not
giving a number would have the same effect of defaulting to 1, not 0.
Right now it's a bit illogical, but at least it's an _undocumented_
illogical behaviour.
This patch makes '^' and '~' act the same for the default count (i.e. both
default to 1), and also have the same behaviour for a count of zero.
Before (no discernible pattern):
[torvalds@woody git]$ git rev-parse v1.5.1 v1.5.1^0 v1.5.1~0 v1.5.1^ v1.5.1~
45354a57ee89815cab9545354a57ee045f5759c945354a57ee
After (fairly logical):
[torvalds@woody git]$ git rev-parse v1.5.1 v1.5.1^0 v1.5.1~0 v1.5.1^ v1.5.1~
45354a57ee89815cab9589815cab95045f5759c9045f5759c9
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function returned NULL when no object that matches the name
was found, but that made the callers more complicated, as nobody
used that NULL return as an indication that no object with such
a name exists. They (at least the careful ones) instead took
the full 40-hexdigit and used in such a case, and the careless
ones segfaulted.
With this "git rev-parse --short 5555555555555555555555555555555555555555"
would stop segfaulting.
This is based on Jeff King's rewrite to my RFC patch, but "missing"
logic swapped to "exists". The final logic reads:
For existing objects, make sure the abbreviated string uniquely
identifies it. Otherwise, make sure the abbreviated string is
long enough so that it would not name any existing object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/maint-parse-careful:
peel_onion: handle NULL
check return value from parse_commit() in various functions
parse_commit: don't fail, if object is NULL
revision.c: handle tag->tagged == NULL
reachable.c::process_tree/blob: check for NULL
process_tag: handle tag->tagged == NULL
check results of parse_commit in merge_bases
list-objects.c::process_tree/blob: check for NULL
reachable.c::add_one_tree: handle NULL from lookup_tree
mark_blob/tree_uninteresting: check for NULL
get_sha1_oneline: check return value of parse_object
read_object_with_reference: don't read beyond the buffer
This converts the index explicitly on read and write to its on-disk
format, allowing the in-core format to contain more flags, and be
simpler.
In particular, the in-core format is now host-endian (as opposed to the
on-disk one that is network endian in order to be able to be shared
across machines) and as a result we can dispense with all the
htonl/ntohl on accesses to the cache_entry fields.
This will make it easier to make use of various temporary flags that do
not exist in the on-disk format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sp/refspec-match:
refactor fetch's ref matching to use refname_match()
push: use same rules as git-rev-parse to resolve refspecs
add refname_match()
push: support pushing HEAD to real branch name
Earlier, ':/<oneline-prefix>' would not work (i.e. die) with commands that
set save_commit_buffer = 0, such as blame, describe, pack-objects, reflog
and bundle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use at least two rulesets for matching abbreviated refnames with
full refnames (starting with 'refs/'). git-rev-parse and git-fetch
use slightly different rules.
This commit introduces a new function refname_match
(const char *abbrev_name, const char *full_name, const char **rules).
abbrev_name is expanded using the rules and matched against full_name.
If a match is found the function returns true. rules is a NULL-terminate
list of format patterns with "%.*s", for example:
const char *ref_rev_parse_rules[] = {
"%.*s",
"refs/%.*s",
"refs/tags/%.*s",
"refs/heads/%.*s",
"refs/remotes/%.*s",
"refs/remotes/%.*s/HEAD",
NULL
};
Asterisks are included in the format strings because this is the form
required in sha1_name.c. Sharing the list with the functions there is
a good idea to avoid duplicating the rules. Hopefully this
facilitates unified matching rules in the future.
This commit makes the rules used by rev-parse for resolving refs to
sha1s available for string comparison. Before this change, the rules
were buried in get_sha1*() and dwim_ref().
A follow-up commit will refactor the rules used by fetch.
refname_match() will be used for matching refspecs in git-send-pack.
Thanks to Daniel Barkalow <barkalow@iabervon.org> for pointing
out that ref_matches_abbrev in remote.c solves a similar problem
and care should be taken to avoid confusion.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These days, show_date() takes a date_mode parameter to specify
the output format, and a separate specialized function for dates
in E-mails does not make much sense anymore.
This retires show_rfc2822_date() function and make it just
another date output format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_short_packed_object was not loading the pack index files.
Teach it to do so.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not every input value passed to get_sha1 is an abbreviated SHA-1.
Its actually quite common for refs to be passed and for those
refs to resolve to full SHA-1s, in which case we may not need to
initialize the alternate object database list in this process.
I'm relocating the call to prepare_alt_odb closer to the code
that actually needs it to maintain the fix first introduced by
Junio in 99a19b43 (to avoid ambiguous SHA-1 abbreviations from
being accepted). This allows us to avoid the alt_odb list setup
if we won't actually need it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
get_sha1_with_mode basically behaves as get_sha1. It has an additional
parameter for storing the mode of the object.
If the mode can not be determined, it stores S_IFINVALID.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The coming index format change doesn't allow for the number of objects
to be determined from the size of the index file directly. Instead, Let's
initialize a field in the packed_git structure with the object count when
the index is validated since the count is always known at that point.
While at it let's reorder some struct packed_git fields to avoid padding
due to needed 64-bit alignment for some of them.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Let's avoid the open coded pack index reference in pack-object and use
nth_packed_object_sha1() instead. This will help encapsulating index
format differences in one place.
And while at it there is no reason to copy SHA1's over and over while a
direct pointer to it in the index will do just fine.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
What the function wants to return is not if we saw any return
from pop_most_recent_commit(), but if we found what was asked
for.
Signed-off-by: Junio C Hamano <junkio@cox.net>
a try, but all I could get was a segfault. It was dereferencing a NULL
commit list. Fix below. With it, this example now works:
$ mkdir .j; cd .j; touch f
$ git-init; git-add f; git-commit -mc f; echo x >f; git-commit -md f
$ git-diff -p :/c :/d
diff --git a/f b/f
index e69de29..587be6b 100644
--- a/f
+++ b/f
@@ -0,0 +1 @@
+x
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As we permit up to 2^32-1 objects in a single packfile we cannot
use a signed int to represent the object offset within a packfile,
after 2^31-1 objects we will start seeing negative indexes and
error out or compute bad addresses within the mmap'd index.
This is a minor cleanup that does not introduce any significant
logic changes. It is roach free.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
To name a commit, you can now say
$ git rev-parse ':/Initial revision of "git"'
and it will return the hash of the youngest commit whose
commit message (the oneline) begins with the given prefix.
For future extension, a leading exclamation mark is treated
specially: if you want to match a commit message starting with
a '!', just repeat the exclamation mark. So, to match a commit
which starts with '!Hello World', use
$ git show ':/!!Hello World'
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When refs/remotes/gfi/master and refs/remotes/gfi/HEAD exist,
and the latter is a symref that points at the former, dwim_ref()
resolves string "gfi" to "refs/remotes/gfi/master" as expected,
but dwim_log() does not understand "gfi@{1.day}" and needs to be
told "gfi/master@{1.day}". This is confusing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since "git log origin/master" uses dwim_log() to match
"refs/remotes/origin/master", it makes sense to do that for
"git log --reflog", too.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is shorter than HEAD@{...} and being nameless it has no semantic
issues.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The work in progress to enable separate reflog for HEAD will make it
independent from reflog of any branch HEAD might be pointing to. In
the mean time disallow HEAD@{...} until that work is completed. Otherwise
people might get used to the current behavior which makes HEAD@{...} an
alias for <current_branch>@{...} which won't be the case later.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
You can pass an extra argument to the function to receive the
reflog message information. Also when the log does not go back
beyond the point the user asked, the cut-off time and count are
given back to the caller for emitting the error messages as
appropriately.
We could later add configuration for get_sha1_basic() to make it
an error instead of it being just a warning.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
Often I find myself wanting to say 'tip of "next" before I
merged the last three topics'. Now I can say that with:
git log next@{3}..next
Since small integers alone are invalid input strings to
approxidate, there is no fear of confusion.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The old code used to totally mix up the notion of a ref-name and the path
that that ref was associated with. That was not only horribly ugly (a
number of users got the path, and then wanted to try to turn it back into
a ref-name again), but it fundamnetally doesn't work at all once we do any
setup where a ref doesn't have a 1:1 relationship with a particular
pathname.
This fixes things up so that we use the ref-name throughout, and only
turn it into a pathname once we actually look it up in the filesystem.
That makes a lot of things much clearer and more straightforward.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace sha1 comparisons to null_sha1 with a global inline (which previously an
unused static inline in builtin-apply.c)
[jc: with a fix from Jonas Fonseca.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is
meant as a file name and ":30" is meant as 30 minutes past 6 pm.
Therefore all date specifications in a sha1 expression must now
appear within brackets and the ':' splitter used for the path name
in a sha1 expression ignores ':' appearing within brackets.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The log parser was only ever matching the last log record due to
calling strtoul on "> 1136091609" rather than " 1136091609". Also
once a match for '@' has been found after the name of the ref there
is no point in looking for another '@' within the remaining text.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extended sha1 expressions may now include date specifications
which indicate a point in time within the local repository's
history. If the ref indicated to the left of '@' has a log in
$GIT_DIR/logs/<ref> then the value of the ref at the time indicated
by the specification is obtained from the ref's log.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier patch to say <ent>:<path> by Linus was very useful, and
this extends the same idea to the current index. An sha1
expression :<path> extracts the object name for the named path
from the current index.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a fairly straightforward patch to allow "get_sha1()" to also have
shorthands for tree and blob objects.
The syntax is very simple and intuitive: you can specify a tree or a blob
by simply specifying <revision>:<path>, and get_sha1() will do the SHA1
lookup from the tree for you.
You can currently do it with "git ls-tree <rev> <path>" and parsing the
output, but that's actually pretty awkward.
With this, you can do something like
git cat-file blob v1.2.4:Makefile
to get the contents of "Makefile" at revision v1.2.4.
Now, this isn't necessarily something you really need all that often, but
the concept itself is actually pretty powerful. We could, for example,
allow things like
git diff v0.99.6:git-commit-script..v1.3.0:git-commit.sh
to see the difference between two arbitrary files in two arbitrary
revisions. To do that, the only thing we'd have to do is to make
git-diff-tree accept two blobs to diff, in addition to the two trees it
now expects.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes sure that many commands that take refs on the command
line to honor core.warnambiguousrefs configuration. Earlier,
the commands affected by this patch did not read the
configuration file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements the suggestion by Jeff King to use
refs/remotes/$foo/HEAD to interpret a shorthand "$foo" to mean
the primary branch head of a tracked remote. clone needs to be
told about this convention as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier it did not grok the 0{40} SHA1 very well, but what it
needed to do was to find the shortest 0{N} that is not used as a
valid object name to be consistent with the way names of valid
objects are abbreviated. This makes some users simpler.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We probably thought anybody who does more than 9 parents in an
Octopus is insane when this was initially done, but there is no
inherent reason to limit the number of independent topic
branches that happen to mature at the same time.
Our commit-tree allows up to 16 already, so at least we should
prepare to handle what we can produce, if only to be consistent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The minimum length of abbreviated object name was hardcoded in
different places to be 4, risking inconsistencies in the future.
Also there were three different "default abbreviation
precision". Use two C preprocessor symbols to clean up this
mess.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I show transcripts to explain how something works, I often
find myself hand-editing the diff-raw output to shorten various
object names in the output.
This adds --abbrev option to the diff family, which shortens
diff-raw output and diff-tree commit id headers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the misguided attempt to refuse processing a branch
name xyzzy and insist it to be given as either heads/xyzzy or
tags/xyzzy when a tag xyzzy exists. There was no reason to do
so --- the search order was predictable and well defined, so if
the user says xyzzy we should have taken the tag xyzzy in such a
case without complaining.
This incidentally fixes another subtle bug related to this. If
such a duplicate branch/tag name happened to be a unique valid
prefix of an existing commit object name (say, "beef"), we did
not take the tag "beef" but after complaining used the commit
object whose name started with beef.
Another problem this fixes while introducing some confusion is
that there is no longer a reason to forbid a branch name HEAD
anymore. In other words, now "git pull . ref1:HEAD" would work
as expected, once we revert "We do not like HEAD branch" patch.
It creates "HEAD" branch under ${GIT_DIR-.git}/refs/heads (or
fast-forwards if already exists) using the tip of ref1 branch
from the current repository, and merges it into the current
branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When .git/refs/heads/frotz and .git/refs/tags/frotz existed, and
the object name stored in .git/refs/heads/frotz were corrupt, we
ended up picking tags/frotz without complaining. Worse yet, if
the corrupt .git/refs/heads/frotz was more than 40 bytes and
began with hexadecimal characters, it silently overwritten the
initial part of the returned result.
This commit adds a couple of tests to demonstrate these cases,
with a fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When both heads/foo and tags/foo exist, get_sha1_basic("foo")
picked up the tag without complaining, which is quite confusing.
Make sure we require unambiguous form, "heads/foo" or "tags/foo"
in such cases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
One caller of deref_tag() was not careful enough to make sure
what deref_tag() returned was not NULL (i.e. we found a tag
object that points at an object we do not have). Fix it, and
warn about refs that point at such an incomplete tag where
needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This does two things:
- we don't allow "." and ".." as components of a refname. Thus get_sha1()
will not accept "./refname" as being the same as "refname" any more.
- git-rev-parse stops doing revision translation after seeing a pathname,
to match the brhaviour of all the tools (once we see a pathname,
everything else will also be parsed as a pathname).
Basically, if you did
git log *
and "gitk" was somewhere in the "*", we don't want to replace the filename
"gitk" with the SHA1 of the branch with the same name.
Of course, if there is any change of ambiguity, you should always use "--"
to make it explicit what are filenames and what are revisions, but this
makes the normal cases sane. The refname rule also means that instead of
the "--", you can do the same thing we're used to doing with filenames
that start with a slash: use "./filename" instead, and now it's a
filename, not an option (and not a revision).
So "git log ./*.c" is now actually a perfectly valid thing to do, even if
the first C-file might have the same name as a branch.
Trivial test:
git-rev-parse gitk ./gitk gitk
should output something like
9843c3074d
./gitk
gitk
where the "./gitk" isn't seen as a revision, and the second "gitk" is a
filename simply because we've seen filenames already, and thus stopped
doing revision parsing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
