It's somewhat traditional to respect sites' self-identification.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP Header redaction code has been adjusted for a newer version of
cURL library that shows its traces differently from earlier
versions.
* jk/redact-h2h3-headers-fix:
http: update curl http/2 info matching for curl 8.3.0
http: factor out matching of curl http/2 trace lines
To redact header lines in http/2 curl traces, we have to parse past some
prefix bytes that curl sticks in the info lines it passes to us. That
changed once already, and we adapted in db30130165 (http: handle both
"h2" and "h2h3" in curl info lines, 2023-06-17).
Now it has changed again, in curl's fbacb14c4 (http2: cleanup trace
messages, 2023-08-04), which was released in curl 8.3.0. Running a build
of git linked against that version will fail to redact the trace (and as
before, t5559 notices and complains).
The format here is a little more complicated than the other ones, as it
now includes a "stream id". This is not constant but is always numeric,
so we can easily parse past it.
We'll continue to match the old versions, of course, since we want to
work with many different versions of curl. We can't even select one
format at compile time, because the behavior depends on the runtime
version of curl we use, not the version we build against.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to parse out curl's http/2 trace lines so we can redact their
headers. We already match two different types of lines from various
vintages of curl. In preparation for adding another (which will be
slightly more complex), let's pull the matching into its own function,
rather than doing it in the middle of a conditional.
While we're doing so, let's expand the comment a bit to describe the two
matches. That probably should have been part of db30130165 (http: handle
both "h2" and "h2h3" in curl info lines, 2023-06-17), but will become
even more important as we add new types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions are all used as callbacks for curl, so they have to
conform to a particular interface. But they don't need all of their
parameters:
- fwrite_null() throws away the input, so it doesn't look at most
parameters
- fwrite_wwwauth() in theory could take the auth struct in its void
pointer, but instead we just access it as the global http_auth
(matching the rest of the code in this file)
- curl_trace() always writes via the trace mechanism, so it doesn't
need its void pointer to know where to send things. Likewise, it
ignores the CURL parameter, since nothing we trace requires querying
the handle.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When redacting auth tokens in trace output from curl, we look for http/2
headers of the form "h2h3 [header: value]". This comes from b637a41ebe
(http: redact curl h2h3 headers in info, 2022-11-11).
But the "h2h3" prefix changed to just "h2" in curl's fc2f1e547 (http2:
support HTTP/2 to forward proxies, non-tunneling, 2023-04-14). That's in
released version curl 8.1.0; linking against that version means we'll
fail to correctly redact the trace. Our t5559.17 notices and fails.
We can fix this by matching either prefix, which should handle both old
and new versions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few configuration variables to tell the cURL library that
different types of ssl-cert and ssl-key are in use.
* sm/ssl-key-type-config:
http: add support for different sslcert and sslkey types.
Basically git work with default curl ssl type - PEM. But for support
eTokens like SafeNet tokens via pksc11 need setup 'ENG' as sslcert type
and as sslkey type. So there added additional options for http to make
that possible.
Signed-off-by: Stanislav Malishevskiy <stanislav.malishevskiy@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow information carried on the WWW-AUthenticate header to be
passed to the credential helpers.
* mc/credential-helper-www-authenticate:
credential: add WWW-Authenticate header to cred requests
http: read HTTP WWW-Authenticate response headers
t5563: add tests for basic and anoymous HTTP access
Read and store the HTTP WWW-Authenticate response headers made for
a particular request.
This will allow us to pass important authentication challenge
information to credential helpers or others that would otherwise have
been lost.
libcurl only provides us with the ability to read all headers recieved
for a particular request, including any intermediate redirect requests
or proxies. The lines returned by libcurl include HTTP status lines
delinating any intermediate requests such as "HTTP/1.1 200". We use
these lines to reset the strvec of WWW-Authenticate header values as
we encounter them in order to only capture the final response headers.
The collection of all header values matching the WWW-Authenticate
header is complicated by the fact that it is legal for header fields to
be continued over multiple lines, but libcurl only gives us each
physical line a time, not each logical header. This line folding feature
is deprecated in RFC 7230 [1] but older servers may still emit them, so
we need to handle them.
In the future [2] we may be able to leverage functions to read headers
from libcurl itself, but as of today we must do this ourselves.
[1] https://www.rfc-editor.org/rfc/rfc7230#section-3.2
[2] https://daniel.haxx.se/blog/2022/03/22/a-headers-api-for-libcurl/
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CURLOPT_PROTOCOLS (and matching CURLOPT_REDIR_PROTOCOLS) flag was
deprecated in curl 7.85.0, and using it generate compiler warnings as of
curl 7.87.0. The path forward is to use CURLOPT_PROTOCOLS_STR, but we
can't just do so unilaterally, as it was only introduced less than a
year ago in 7.85.0.
Until that version becomes ubiquitous, we have to either disable the
deprecation warning or conditionally use the "STR" variant on newer
versions of libcurl. This patch switches to the new variant, which is
nice for two reasons:
- we don't have to worry that silencing curl's deprecation warnings
might cause us to miss other more useful ones
- we'd eventually want to move to the new variant anyway, so this gets
us set up (albeit with some extra ugly boilerplate for the
conditional)
There are a lot of ways to split up the two cases. One way would be to
abstract the storage type (strbuf versus a long), how to append
(strbuf_addstr vs bitwise OR), how to initialize, which CURLOPT to use,
and so on. But the resulting code looks pretty magical:
GIT_CURL_PROTOCOL_TYPE allowed = GIT_CURL_PROTOCOL_TYPE_INIT;
if (...http is allowed...)
GIT_CURL_PROTOCOL_APPEND(&allowed, "http", CURLOPT_HTTP);
and you end up with more "#define GIT_CURL_PROTOCOL_TYPE" macros than
actual code.
On the other end of the spectrum, we could just implement two separate
functions, one that handles a string list and one that handles bits. But
then we end up repeating our list of protocols (http, https, ftp, ftp).
This patch takes the middle ground. The run-time code is always there to
handle both types, and we just choose which one to feed to curl.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The IOCTLFUNCTION option has been deprecated, and generates a compiler
warning in recent versions of curl. We can switch to using SEEKFUNCTION
instead. It was added in 2008 via curl 7.18.0; our INSTALL file already
indicates we require at least curl 7.19.4.
But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL},
and those didn't arrive until 7.19.5. One workaround would be to use a
bare 0/1 here (or define our own macros). But let's just bump the
minimum required version to 7.19.5. That version is only a minor version
bump from our existing requirement, and is only a 2 month time bump for
versions that are almost 13 years old. So it's not likely that anybody
cares about the distinction.
Switching means we have to rewrite the ioctl functions into seek
functions. In some ways they are simpler (seeking is the only
operation), but in some ways more complex (the ioctl allowed only a full
rewind, but now we can seek to arbitrary offsets).
Curl will only ever use SEEK_SET (per their documentation), so I didn't
bother implementing anything else, since it would naturally be
completely untested. This seems unlikely to change, but I added an
assertion just in case.
Likewise, I doubt curl will ever try to seek outside of the buffer sizes
we've told it, but I erred on the defensive side here, rather than do an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With GIT_TRACE_CURL=1 or GIT_CURL_VERBOSE=1, sensitive headers like
"Authorization" and "Cookie" get redacted. However, since [1], curl's
h2h3 module (invoked when using HTTP/2) also prints headers in its
"info", which don't get redacted. For example,
echo 'github.com TRUE / FALSE 1698960413304 o foo=bar' >cookiefile &&
GIT_TRACE_CURL=1 GIT_TRACE_CURL_NO_DATA=1 git \
-c 'http.cookiefile=cookiefile' \
-c 'http.version=' \
ls-remote https://github.com/git/git refs/heads/main 2>output &&
grep 'cookie' output
produces output like:
23:04:16.920495 http.c:678 == Info: h2h3 [cookie: o=foo=bar]
23:04:16.920562 http.c:637 => Send header: cookie: o=<redacted>
Teach http.c to check for h2h3 headers in info and redact them using the
existing header redaction logic. This fixes the broken redaction logic
that we noted in the previous commit, so mark the redaction tests as
passing under HTTP2.
[1] f8c3724aa9
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Earlier, HTTP transport clients learned to tell the server side
what locale they are in by sending Accept-Language HTTP header, but
this was done only for some requests but not others.
* ll/curl-accept-language:
remote-curl: send Accept-Language header to server
Git server end's ability to accept Accept-Language header was introduced
in f18604bbf2 (http: add Accept-Language header if possible, 2015-01-28),
but this is only used by very early phase of the transfer, which is HTTP
GET request to discover references. For other phases, like POST request
in the smart HTTP, the server does not know what language the client
speaks.
Teach git client to learn end-user's preferred language and throw
accept-language header to the server side. Once the server gets this header,
it has the ability to talk to end-user with language they understand.
This would be very helpful for many non-English speakers.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Lowercase in manpage should use camelCase:
* Documentation/config/http.txt: http.pinnedpubkey
Lowercase in translable strings should use camelCase:
* builtin/fast-import.c: pack.indexversion
* builtin/gc.c: gc.logexpiry
* builtin/index-pack.c: pack.indexversion
* builtin/pack-objects.c: pack.indexversion
* builtin/repack.c: pack.writebitmaps
* commit.c: i18n.commitencoding
* gpg-interface.c: user.signingkey
* http.c: http.postbuffer
* submodule-config.c: submodule.fetchjobs
Mismatched camelCases, choose the former:
* Documentation/config/transfer.txt: transfer.credentialsInUrl
remote.c: transfer.credentialsInURL
[^1]: https://github.com/git-l10n/git-po-helper
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preliminary code refactoring around transport and bundle code.
* ds/bundle-uri:
bundle.h: make "fd" version of read_bundle_header() public
remote: allow relative_url() to return an absolute url
remote: move relative_url()
http: make http_get_file() external
fetch-pack: move --keep=* option filling to a function
fetch-pack: add a deref_without_lazy_fetch_extended()
dir API: add a generalized path_match_flags() function
connect.c: refactor sending of agent & object-format
With the new http.curloptResolve configuration, the CURLOPT_RESOLVE
mechanism that allows cURL based applications to use pre-resolved
IP addresses for the requests is exposed to the scripts.
* cc/http-curlopt-resolve:
http: add custom hostname to IP address resolutions
In http.c, the run_active_slot() function allows the given "slot" to
make progress by calling step_active_slots() in a loop repeatedly,
and the loop is not left until the request held in the slot
completes.
Ages ago, we used to use the slot->in_use member to get out of the
loop, which misbehaved when the request in "slot" completes (at
which time, the result of the request is copied away from the slot,
and the in_use member is cleared, making the slot ready to be
reused), and the "slot" gets reused to service a different request
(at which time, the "slot" becomes in_use again, even though it is
for a different request). The loop terminating condition mistakenly
thought that the original request has yet to be completed.
Today's code, after baa7b67d (HTTP slot reuse fixes, 2006-03-10)
fixed this issue, uses a separate "slot->finished" member that is
set in run_active_slot() to point to an on-stack variable, and the
code that completes the request in finish_active_slot() clears the
on-stack variable via the pointer to signal that the particular
request held by the slot has completed. It also clears the in_use
member (as before that fix), so that the slot itself can safely be
reused for an unrelated request.
One thing that is not quite clean in this arrangement is that,
unless the slot gets reused, at which point the finished member is
reset to NULL, the member keeps the value of &finished, which
becomes a dangling pointer into the stack when run_active_slot()
returns. Clear the finished member before the control leaves the
function, which has a side effect of unconfusing compilers like
recent GCC 12 that is over-eager to warn against such an assignment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This method will be used in an upcoming extension of git-remote-curl to
download a single file over HTTP(S) by request.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Libcurl has a CURLOPT_RESOLVE easy option that allows
the result of hostname resolution in the following
format to be passed:
[+]HOST:PORT:ADDRESS[,ADDRESS]
This way, redirects and everything operating against the
HOST+PORT will use the provided ADDRESS(s).
The following format is also allowed to stop using
hostname resolutions that have already been passed:
-HOST:PORT
See https://curl.se/libcurl/c/CURLOPT_RESOLVE.html for
more details.
Let's add a corresponding "http.curloptResolve" config
option that takes advantage of CURLOPT_RESOLVE.
Each value configured for the "http.curloptResolve" key
is passed "as is" to libcurl through CURLOPT_RESOLVE, so
it should be in one of the above 2 formats. This keeps
the implementation simple and makes us consistent with
libcurl's CURLOPT_RESOLVE, and with curl's corresponding
`--resolve` command line option.
The implementation uses CURLOPT_RESOLVE only in
get_active_slot() which is called by all the HTTP
request sending functions.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate those run-command API users that assign directly to the "argv"
member to use a strvec_pushv() of "args" instead.
In these cases it did not make sense to further refactor these
callers, e.g. daemon.c could be made to construct the arguments closer
to handle(), but that would require moving the construction from its
cmd_main() and pass "argv" through two intermediate functions.
It would be possible for a change like this to introduce a regression
if we were doing:
cp.argv = argv;
argv[1] = "foo";
And changed the code, as is being done here, to:
strvec_pushv(&cp.args, argv);
argv[1] = "foo";
But as viewing this change with the "-W" flag reveals none of these
functions modify variable that's being pushed afterwards in a way that
would introduce such a logic error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ab/designated-initializers-more:
builtin/remote.c: add and use SHOW_INFO_INIT
builtin/remote.c: add and use a REF_STATES_INIT
urlmatch.[ch]: add and use URLMATCH_CONFIG_INIT
builtin/blame.c: refactor commit_info_init() to COMMIT_INFO_INIT macro
daemon.c: refactor hostinfo_init() to HOSTINFO_INIT macro
Sensitive data in the HTTP trace were supposed to be redacted, but
we failed to do so in HTTP/2 requests.
* jk/http-redact-fix:
http: match headers case-insensitively when redacting
Change the initialization pattern of "struct urlmatch_config" to use
an *_INIT macro and designated initializers. Right now there's no
other "struct" member of "struct urlmatch_config" which would require
its own *_INIT, but it's good practice not to assume that. Let's also
change this to a designated initializer while we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error shown when a http.pinnedPubKey doesn't match to point
the http.pinnedPubKey variable added in aeff8a6121 (http: implement
public key pinning, 2016-02-15), e.g.:
git -c http.pinnedPubKey=sha256/someNonMatchingKey ls-remote https://github.com/git/git.git
fatal: unable to access 'https://github.com/git/git.git/' with http.pinnedPubkey configuration: SSL: public key does not match pinned public key!
Before this we'd emit the exact same thing without the " with
http.pinnedPubkey configuration". The advantage of doing this is that
we're going to get a translated message (everything after the ":" is
hardcoded in English in libcurl), and we've got a reference to the
git-specific configuration variable that's causing the error.
Unfortunately we can't test this easily, as there are no tests that
require https:// in the test suite, and t/lib-httpd.sh doesn't know
how to set up such tests. See [1] for the start of a discussion about
what it would take to have divergent "t/lib-httpd/apache.conf" test
setups. #leftoverbits
1. https://lore.kernel.org/git/YUonS1uoZlZEt+Yd@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When HTTP/2 is in use, we fail to correctly redact "Authorization" (and
other) headers in our GIT_TRACE_CURL output.
We get the headers in our CURLOPT_DEBUGFUNCTION callback, curl_trace().
It passes them along to curl_dump_header(), which in turn checks
redact_sensitive_header(). We see the headers as a text buffer like:
Host: ...
Authorization: Basic ...
After breaking it into lines, we match each header using skip_prefix().
This is case-sensitive, even though HTTP headers are case-insensitive.
This has worked reliably in the past because these headers are generated
by curl itself, which is predictable in what it sends.
But when HTTP/2 is in use, instead we get a lower-case "authorization:"
header, and we fail to match it. The fix is simple: we should match with
skip_iprefix().
Testing is more complicated, though. We do have a test for the redacting
feature, but we don't hit the problem case because our test Apache setup
does not understand HTTP/2. You can reproduce the issue by applying this
on top of the test change in this patch:
diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf
index afa91e38b0..19267c7107 100644
--- a/t/lib-httpd/apache.conf
+++ b/t/lib-httpd/apache.conf
@@ -29,6 +29,9 @@ ErrorLog error.log
LoadModule setenvif_module modules/mod_setenvif.so
</IfModule>
+LoadModule http2_module modules/mod_http2.so
+Protocols h2c
+
<IfVersion < 2.4>
LockFile accept.lock
</IfVersion>
@@ -64,8 +67,8 @@ LockFile accept.lock
<IfModule !mod_access_compat.c>
LoadModule access_compat_module modules/mod_access_compat.so
</IfModule>
-<IfModule !mod_mpm_prefork.c>
- LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
+<IfModule !mod_mpm_event.c>
+ LoadModule mpm_event_module modules/mod_mpm_event.so
</IfModule>
<IfModule !mod_unixd.c>
LoadModule unixd_module modules/mod_unixd.so
diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh
index 1c2a444ae7..ff74f0ae8a 100755
--- a/t/t5551-http-fetch-smart.sh
+++ b/t/t5551-http-fetch-smart.sh
@@ -24,6 +24,10 @@ test_expect_success 'create http-accessible bare repository' '
git push public main:main
'
+test_expect_success 'prefer http/2' '
+ git config --global http.version HTTP/2
+'
+
setup_askpass_helper
test_expect_success 'clone http repository' '
but this has a few issues:
- it's not necessarily portable. The http2 apache module might not be
available on all systems. Further, the http2 module isn't compatible
with the prefork mpm, so we have to switch to something else. But we
don't necessarily know what's available. It would be nice if we
could have conditional config, but IfModule only tells us if a
module is already loaded, not whether it is available at all.
This might be a non-issue. The http tests are already optional, and
modern-enough systems may just have both of these. But...
- if we do this, then we'd no longer be testing HTTP/1.1 at all. I'm
not sure how much that matters since it's all handled by curl under
the hood, but I'd worry that some detail leaks through. We'd
probably want two scripts running similar tests, one with HTTP/2 and
one with HTTP/1.1.
- speaking of which, a later test fails with the patch above! The
problem is that it is making sure we used a chunked
transfer-encoding by looking for that header in the trace. But
HTTP/2 doesn't support that, as it has its own streaming mechanisms
(the overall operation works fine; we just don't see the header in
the trace).
Furthermore, even with the changes above, this test still does not
detect the current failure, because we see _both_ HTTP/1.1 and HTTP/2
requests, which confuse it. Quoting only the interesting bits from the
resulting trace file, we first see:
=> Send header: GET /auth/smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1
=> Send header: Connection: Upgrade, HTTP2-Settings
=> Send header: Upgrade: h2c
=> Send header: HTTP2-Settings: AAMAAABkAAQCAAAAAAIAAAAA
<= Recv header: HTTP/1.1 401 Unauthorized
<= Recv header: Date: Wed, 22 Sep 2021 20:03:32 GMT
<= Recv header: Server: Apache/2.4.49 (Debian)
<= Recv header: WWW-Authenticate: Basic realm="git-auth"
So the client asks for HTTP/2, but Apache does not do the upgrade for
the 401 response. Then the client repeats with credentials:
=> Send header: GET /auth/smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1
=> Send header: Authorization: Basic <redacted>
=> Send header: Connection: Upgrade, HTTP2-Settings
=> Send header: Upgrade: h2c
=> Send header: HTTP2-Settings: AAMAAABkAAQCAAAAAAIAAAAA
<= Recv header: HTTP/1.1 101 Switching Protocols
<= Recv header: Upgrade: h2c
<= Recv header: Connection: Upgrade
<= Recv header: HTTP/2 200
<= Recv header: content-type: application/x-git-upload-pack-advertisement
So the client does properly redact there, because we're speaking
HTTP/1.1, and the server indicates it can do the upgrade. And then the
client will make further requests using HTTP/2:
=> Send header: POST /auth/smart/repo.git/git-upload-pack HTTP/2
=> Send header: authorization: Basic dXNlckBob3N0OnBhc3NAaG9zdA==
=> Send header: content-type: application/x-git-upload-pack-request
And there we can see that the credential is _not_ redacted. This part of
the test is what gets confused:
# Ensure that there is no "Basic" followed by a base64 string, but that
# the auth details are redacted
! grep "Authorization: Basic [0-9a-zA-Z+/]" trace &&
grep "Authorization: Basic <redacted>" trace
The first grep does not match the un-redacted HTTP/2 header, because
it insists on an uppercase "A". And the second one does find the
HTTP/1.1 header. So as far as the test is concerned, everything is OK,
but it failed to notice the un-redacted lines.
We can make this test (and the other related ones) more robust by adding
"-i" to grep case-insensitively. This isn't really doing anything for
now, since we're not actually speaking HTTP/2, but it future-proofs the
tests for a day when we do (either we add explicit HTTP/2 test support,
or it's eventually enabled by default by our Apache+curl test setup).
And it doesn't hurt in the meantime for the tests to be more careful.
The change to use "grep -i", coupled with the changes to use HTTP/2
shown above, causes the test to fail with the current code, and pass
after this patch is applied.
And finally, there's one other way to demonstrate the issue (and how I
actually found it originally). Looking at GIT_TRACE_CURL output against
github.com, you'll see the unredacted output, even if you didn't set
http.version. That's because setting it is only necessary for curl to
send the extra headers in its HTTP/1.1 request that say "Hey, I speak
HTTP/2; upgrade if you do, too". But for a production site speaking
https, the server advertises via ALPN, a TLS extension, that it supports
HTTP/2, and the client can immediately start using it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new git-curl-compat.h header to define CURL_SOCKOPT_OK to its
known value if we're on an older curl version that doesn't have it. It
was hardcoded in http.c in a15d069a19 (http: enable keepalive on TCP
sockets, 2013-10-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed in 644de29e22 (http: drop support for curl < 7.19.4,
2021-07-30) checking against LIBCURL_VERSION_NUM isn't as reliable as
checking specific symbols present in curl, as some distros have been
known to backport features.
However, while some of the curl_easy_setopt() arguments we rely on are
macros, others are enum, and we can't assume that those that are
macros won't change into enums in the future.
So we're still going to have to check LIBCURL_VERSION_NUM, but by
doing that in one central place and using a macro definition of our
own, anyone who's backporting features can define it themselves, and
thus have access to more modern curl features that they backported,
even if they didn't bump the LIBCURL_VERSION_NUM.
More importantly, as shown in a preceding commit doing these version
checks makes for hard to read and possibly buggy code, as shown by the
bug fixed there where we were conflating base 10 for base 16 when
comparing the version.
By doing them all in one place we'll hopefully reduce the chances of
such future mistakes, furthermore it now becomes easier to see at a
glance what the oldest supported version is, which makes it easier to
reason about any future deprecation similar to the recent
e48a623dea (Merge branch 'ab/http-drop-old-curl', 2021-08-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In aeff8a6121 (http: implement public key pinning, 2016-02-15) a
dependency and warning() was added if curl older than 7.44.0 was used,
but the relevant code depended on CURLOPT_PINNEDPUBLICKEY, introduced
in 7.39.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d73019feb4 (http: add support selecting http version, 2018-11-08)
a dependency was added on CURL_HTTP_VERSION_2, but this feature was
introduced in curl version 7.43.0, not 7.47.0, as the incorrect
version check led us to believe.
As looking through the history of that commit on the mailing list will
reveal[1], the reason for this is that an earlier version of it
depended on CURL_HTTP_VERSION_2TLS, which was introduced in libcurl
7.47.0.
But the version that made it in in d73019feb4 had dropped the
dependency on CURL_HTTP_VERSION_2TLS, but the corresponding version
check was not corrected.
The newest symbol we depend on is CURL_HTTP_VERSION_2. It was added in
7.33.0, but the CURL_HTTP_VERSION_2 alias we used was added in
7.47.0. So we could support an even older version here, but let's just
correct the checked version.
1. https://lore.kernel.org/git/pull.69.git.gitgitgadget@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 644de29e22 (http: drop support for curl < 7.19.4, 2021-07-30) we
dropped support for curl < 7.19.4, so we can drop support for this
non-obvious dependency on curl < 7.18.0.
It's non-obvious because in curl's hex version notation 0x071800 is
version 7.24.0, *not* 7.18.0, so at a glance this patch looks
incorrect.
But it's correct, because the existing version check being removed
here is wrong. The check guards use of the following curl defines:
CURLPROXY_SOCKS4 7.10
CURLPROXY_SOCKS4A 7.18.0
CURLPROXY_SOCKS5 7.10
CURLPROXY_SOCKS5_HOSTNAME 7.18.0
I.e. the oldest version that has these is in fact 7.18.0, not
7.24.0. That we were checking 7.24.0 is just an mistake in
6d7afe07f2 (remote-http(s): support SOCKS proxies, 2015-10-26),
i.e. its author confusing base 10 and base 16.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CURLOPT_FILE name is an alias for CURLOPT_WRITEDATA, the
CURLOPT_WRITEDATA name has been preferred since curl 7.9.7, released
in May 2002[1].
1. https://curl.se/libcurl/c/CURLOPT_WRITEDATA.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the conditional use of CURLAUTH_DIGEST_IE and
CURLOPT_USE_SSL. These two have been split from earlier simpler checks
against LIBCURL_VERSION_NUM for ease of review.
According to
https://github.com/curl/curl/blob/master/docs/libcurl/symbols-in-versions
the CURLAUTH_DIGEST_IE flag became available in 7.19.3, and
CURLOPT_USE_SSL in 7.17.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.16.0, let's
continue that and drop support for versions older than 7.19.3. This
allows us to simplify the code by getting rid of some "#ifdef"'s.
Git was broken with vanilla curl < 7.19.4 from v2.12.0 until
v2.15.0. Compiling with it was broken by using CURLPROTO_* outside any
"#ifdef" in aeae4db174 (http: create function to get curl allowed
protocols, 2016-12-14), and fixed in v2.15.0 in f18777ba6e (http: fix
handling of missing CURLPROTO_*, 2017-08-11).
It's unclear how much anyone was impacted by that in practice, since
as noted in [1] RHEL versions using curl older than that still
compiled, because RedHat backported some features. Perhaps other
vendors did the same.
Still, it's one datapoint indicating that it wasn't in active use at
the time. That (the v2.12.0 release) was in Feb 24, 2017, with v2.15.0
on Oct 30, 2017, it's now mid-2021.
1. http://lore.kernel.org/git/c8a2716d-76ac-735c-57f9-175ca3acbcb0@jupiterrise.com;
followed-up by f18777ba6e (http: fix handling of missing CURLPROTO_*,
2017-08-11)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.11.1, let's
continue that and drop support for versions older than 7.16.0. This
allows us to get rid of some now-obsolete #ifdefs.
Choosing 7.16.0 is a somewhat arbitrary cutoff:
1. It came out in October of 2006, almost 15 years ago.
Besides being a nice round number, around 10 years is
a common end-of-life support period, even for conservative
distributions.
2. That version introduced the curl_multi interface, which
gives us a lot of bang for the buck in removing #ifdefs
RHEL 5 came with curl 7.15.5[1] (released in August 2006). RHEL 5's
extended life cycle program ended on 2020-11-30[1]. RHEL 6 comes with
curl 7.19.7 (released in November 2009), and RHEL 7 comes with
7.29.0 (released in February 2013).
1. http://lore.kernel.org/git/873e1f31-2a96-5b72-2f20-a5816cad1b51@jupiterrise.com
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
