Because we run the tests via "prove", the output from
"--verbose" may interfere with our TAP output. Using
"--verbose-log" solves this while letting us retain our
on-disk log.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--verbose" option redirects output from arbitrary
test commands to stdout. This is useful for examining the
output manually, like:
./t5547-push-quarantine.sh -v | less
But it also means that the output is intermingled with the
TAP directives, which can confuse a TAP parser like "prove".
This has always been a potential problem, but became an
issue recently when one test happened to output the word
"ok" on a line by itself, which prove interprets as a test
success:
$ prove t5547-push-quarantine.sh :: -v
t5547-push-quarantine.sh .. 1/? To dest.git
* [new branch] HEAD -> master
To dest.git
! [remote rejected] reject -> reject (pre-receive hook declined)
error: failed to push some refs to 'dest.git'
fatal: git cat-file d08c8eba97f4e683ece08654c7c8d2ba0c03b129: bad file
t5547-push-quarantine.sh .. Failed -1/4 subtests
Test Summary Report
-------------------
t5547-push-quarantine.sh (Wstat: 0 Tests: 5 Failed: 0)
Parse errors: Tests out of sequence. Found (2) but expected (3)
Tests out of sequence. Found (3) but expected (4)
Tests out of sequence. Found (4) but expected (5)
Bad plan. You planned 4 tests but ran 5.
Files=1, Tests=5, 0 wallclock secs ( 0.01 usr + 0.01 sys = 0.02 CPU)
Result: FAIL
One answer is "if it hurts, don't do it", but that's not
quite the whole story. The Travis tests use "--verbose
--tee" so that they can get the benefit of prove's parallel
options, along with a verbose log in case there is a
failure. We just need the verbose output to go to the log,
but keep stdout clean.
Getting this right turns out to be surprisingly difficult.
Here's the progression of alternatives I considered:
1. Add an option to write verbose output to stderr. This is
hard to capture, though, because we want each test to
have its own log (because they're all run in parallel
and the jumbled output would be useless).
2. Add an option to write verbose output to a file in
test-results. This works, but the log is missing all of
the non-verbose output, which gives context.
3. Like (2), but teach say_color() to additionally output
to the log. This mostly works, but misses any output
that happens outside of the say() functions (which isn't
a lot, but is a potential maintenance headache).
4. Like (2), but make the log file the same as the "--tee"
file. That almost works, but now we have two processes
opening the same file. That gives us two separate
descriptors, each with their own idea of the current
position. They'll each start writing at offset 0, and
overwrite each other's data.
5. Like (4), but in each case open the file for appending.
That atomically positions each write at the end of the
file.
It's possible we may still get sheared writes between
the two processes, but this is already the case when
writing to stdout. It's not a problem in practice
because the test harness generally waits for snippets to
finish before writing the TAP output.
We can ignore buffering issues with tee, because POSIX
mandates that it does not buffer. Likewise, POSIX
specifies "tee -a", so it should be available
everywhere.
This patch implements option (5), which seems to work well
in practice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are careful in test_done to handle a results directory
with a space in it, but the "--tee" code path does not.
Doing:
export TEST_OUTPUT_DIRECTORY='/tmp/path with spaces'
./t000-init.sh --tee
results in errors. Let's consistently double-quote our path
variables so that this works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_mailboxes should probably eventually be completely equivalent to
Mail::Address, and if this happens we can drop the Mail::Address
dependency. Add a comment in the code reminding the current state of the
code, and point to the corresponding failing test to help future
contributors to get it right.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e3fdbcc8e1 (parse_mailboxes: accept extra text after <...> address,
2016-10-13) improved our in-house address parser and made it closer to
Mail::Address. As a consequence, some tests comparing it to
Mail::Address now pass, but e3fdbcc8e1 forgot to update the test.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The doc-tool stack does not always respect the 'tab = 8 spaces' rule,
particularly the git-scm doc pages https://git-scm.com/docs/git-merge-base
and the Git generated html pages.
Use just spaces within the block of the ascii art.
Noticed when reviewing Junio's suggested update to `git merge-base`
https://public-inbox.org/git/xmqqmvi2sj8f.fsf@gitster.mtv.corp.google.com/T/#u
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was actually only one error message that was not yet marked for
translation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite a few error messages touched by this developer during the work to
speed up rebase -i started with an upper case letter, violating our
current conventions. Instead of sneaking in this fix (and forgetting
quite a few error messages), let's just have one wholesale patch fixing
all of the error messages in the sequencer.
While at it, the funny "error: Error wrapping up..." was changed to a
less funny, but more helpful, "error: failed to finalize...".
Pointed out by Junio Hamano.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the code consistent by fixing quite a couple of error messages.
Suggested by Jakub Narębski.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of this function goes back all the way to 043a449
(sequencer: factor code out of revert builtin, 2012-01-11), long before a
serious effort was made to translate all the error messages.
It is slightly out of the context of the current patch series (whose
purpose it is to re-implement the performance critical parts of the
interactive rebase in C) to make the error messages in the sequencer
translatable, but what the heck. We'll just do it while we're looking at
this part of the code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer was introduced to make the cherry-pick and revert
functionality available as library function, with the original idea
being to extend the sequencer to also implement the rebase -i
functionality.
The test to ensure that all of the commands in the script are identical
to the overall operation does not mesh well with that.
Therefore let's disable the test in rebase -i mode.
While at it, error out early if the "instruction sheet" (i.e. the todo
script) could not be parsed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit prepares for future callers that will have a pointer/length
to some text to be written that lacks an LF, yet an LF is desired.
Instead of requiring the caller to append an LF to the buffer (and
potentially allocate memory to do so), the write_message() function
learns to append an LF at the end of the file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we required an strbuf. But that limits the use case too much.
In the upcoming patch series (for which the current patch series prepares
the sequencer), we will want to write content to a file for which we have
a pointer and a length, not an strbuf.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to wait until the atexit() handler kicks in at the end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nothing in the name "write_message()" suggests that the function
releases the strbuf passed to it. So let's release the strbuf in the
caller instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase's scripts may be indented; we need to handle this
case, too, now that we prepare the sequencer to process interactive
rebases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The run_git_commit() function already knows how to amend commits, and
with this new option, it can also clean up commit messages (i.e. strip
out commented lines). This is needed to implement rebase -i's 'fixup'
and 'squash' commands as sequencer commands.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the run_git_commit() function to take an argument that will
allow us to implement "todo" commands that need to amend the commit
messages ("fixup", "squash" and "reword").
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the upcoming commits, we will implement more and more of rebase -i's
functionality inside the sequencer. One particular feature of the
commands to come is that some of them allow editing the commit message
while others don't, i.e. we cannot define in the replay_opts whether the
commit message should be edited or not.
Let's add a new parameter to the run_git_commit() function. Previously,
it was the duty of the caller to ensure that the opts->edit setting
indicates whether to let the user edit the commit message or not,
indicating that it is an "all or nothing" setting, i.e. that the
sequencer wants to let the user edit *all* commit message, or none at
all. In the upcoming rebase -i mode, it will depend on the particular
command that is currently executed, though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we are slowly teaching the sequencer to perform the hard work for
the interactive rebase, we need to read files that were written by
shell scripts.
These files typically contain a single line and are invariably ended
by a line feed (and possibly a carriage return before that). Let's use
a helper to read such files and to remove the line ending.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In interactive rebases, we commit a little bit differently than the
sequencer did so far: we heed the "author-script", the "message" and the
"amend" files in the .git/rebase-merge/ subdirectory.
Likewise, we may want to edit the commit message *even* when providing a
file containing the suggested commit message. Therefore we change the
code to not even provide a default message when we do not want any, and
to call the editor explicitly.
Also, in "interactive rebase" mode we want to skip reading the options
in the state directory of the cherry-pick/revert commands.
Finally, as interactive rebase's GPG settings are configured differently
from how cherry-pick (and therefore sequencer) handles them, we will
leave support for that to the next commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git-rebase-todo` file contains a list of commands. Most of those
commands have the form
<verb> <sha1> <oneline>
The <oneline> is displayed primarily for the user's convenience, as
rebase -i really interprets only the <verb> <sha1> part. However, there
are *some* places in interactive rebase where the <oneline> is used to
display messages, e.g. for reporting at which commit we stopped.
So let's just remember it when parsing the todo file; we keep a copy of
the entire todo file anyway (to write out the new `done` and
`git-rebase-todo` file just before processing each command), so all we
need to do is remember the begin offsets and lengths.
As we will have to parse and remember the command-line for `exec` commands
later, we do not call the field "oneline" but rather "arg" (and will reuse
that for exec's command-line).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subcommands are used exactly once, at the very beginning of
sequencer_pick_revisions(), to determine what to do. This is an
unnecessary level of indirection: we can simply call the correct
function to begin with. So let's do that.
While at it, ensure that the subcommands return an error code so that
they do not have to die() all over the place (bad practice for library
functions...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not unheard of that editors on Windows write CR/LF even if the
file originally had only LF. This is particularly awkward for exec lines
of a rebase -i todo sheet. Take for example the insn "exec echo": The
shell script parser splits at the LF and leaves the CR attached to
"echo", which leads to the unknown command "echo\r".
Work around that by stripping CR when reading the todo commands, as we
already do for LF.
This happens to fix t9903.14 and .15 in MSYS1 environments (with the
rebase--helper patches based on this patch series): the todo script
constructed in such a setup contains CR/LF thanks to MSYS1 runtime's
cleverness.
Based on a report and a patch by Johannes Sixt.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we came up with the "sequencer" idea, we really wanted to have
kind of a plumbing equivalent of the interactive rebase. Hence the
choice of words: the "todo" script, a "pick", etc.
However, when it came time to implement the entire shebang, somehow this
idea got lost and the sequencer was used as working horse for
cherry-pick and revert instead. So as not to interfere with the
interactive rebase, it even uses a separate directory to store its
state.
Furthermore, it also is stupidly strict about the "todo" script it
accepts: while it parses commands in a way that was *designed* to be
similar to the interactive rebase, it then goes on to *error out* if the
commands disagree with the overall action (cherry-pick or revert).
Finally, the sequencer code chose to deviate from the interactive rebase
code insofar that when it comes to writing the file with the remaining
commands, it *reformats* the "todo" script instead of just writing the
part of the parsed script that were not yet processed. This is not only
unnecessary churn, but might well lose information that is valuable to
the user (i.e. comments after the commands).
Let's just bite the bullet and rewrite the entire parser; the code now
becomes not only more elegant: it allows us to go on and teach the
sequencer how to parse *true* "todo" scripts as used by the interactive
rebase itself. In a way, the sequencer is about to grow up to do its
older brother's job. Better.
In particular, we choose to maintain the list of commands in an array
instead of a linked list: this is flexible enough to allow us later on to
even implement rebase -i's reordering of fixup!/squash! commits very
easily (and with a very nice speed bonus, at least on Windows).
While at it, do not stop at the first problem, but list *all* of the
problems. This will help the user when the sequencer will do `rebase
-i`'s work by allowing to address all issues in one go rather than going
back and forth until the todo list is valid.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only does this DRY up the code (providing a better documentation what
the code is about, as well as allowing to change the behavior in a single
place), it also makes it substantially shorter to use the same
functionality in functions to be introduced when we teach the sequencer to
process interactive-rebase's git-rebase-todo file.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the next commits, we will work on improving the sequencer to the
point where it can process the todo script of an interactive rebase. To
that end, we will need to teach the sequencer to read interactive
rebase's todo file. In preparation, we consolidate all places where
that todo file is needed to call a function that we will later extend.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer is our attempt to lib-ify cherry-pick. Yet it behaves
like a one-shot command when it reads its configuration: memory is
allocated and released only when the command exits.
This is kind of okay for git-cherry-pick, which *is* a one-shot
command. All the work to make the sequencer its work horse was
done to allow using the functionality as a library function, though,
including proper clean-up after use.
To remedy that, take custody of the option values in question,
allocating and duping literal constants as needed and freeing them
at end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve type safety by making arguments (whether from configuration or
from the command line) have their own "struct arg_item" type, separate
from the "struct trailer_item" type used to represent the trailers in
the buffer being manipulated.
This change also prepares "struct trailer_item" to be further
differentiated from "struct arg_item" in future patches.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, creation and addition (to a list) of trailer items are spread
across multiple functions. Streamline this by only having 2 functions:
one to parse the user-supplied string, and one to add the parsed
information to a list.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the existing handwritten implementation of a doubly-linked list
in trailer.c with the functions and macros from list.h. This
significantly simplifies the code.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding support for prefixing output of log and other commands using
--line-prefix, commit 660e113ce1 ("graph: add support for
--line-prefix on all graph-aware output", 2016-08-31) accidentally
broke rev-list --header output.
In order to make the output appear with a line-prefix, the flow was
changed to always use the graph subsystem for display. Unfortunately
the graph flow in rev-list did not use info->hdr_termination as it was
assumed that graph output would never need to putput NULs.
Since we now always use the graph code in order to handle the case of
line-prefix, simply replace putchar('\n') with
putchar(info->hdr_termination) which will correct this issue.
Add a test for the --header case to make sure we don't break it in the
future.
Reported-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VyhL
-----END PGP SIGNATURE-----
Merge tag 'gitgui-0.21.0' of git://repo.or.cz/git-gui
git-gui 0.21.0
* tag 'gitgui-0.21.0' of git://repo.or.cz/git-gui: (22 commits)
git-gui: set version 0.21
git-gui: Mark 'All' in remote.tcl for translation
git-gui i18n: Updated Bulgarian translation (565,0f,0u)
git-gui: avoid persisting modified author identity
git-gui: handle the encoding of Git's output correctly
git-gui: unicode file name support on windows
git-gui: Update Russian translation
git-gui: maintain backwards compatibility for merge syntax
git-gui i18n: mark string in lib/error.tcl for translation
git-gui: fix incorrect use of Tcl append command
git-gui i18n: mark "usage:" strings for translation
git-gui i18n: internationalize use of colon punctuation
git-gui: ensure the file in the diff pane is in the list of selected files
git-gui: support for $FILENAMES in tool definitions
git-gui: fix initial git gui message encoding
git-gui/po/glossary/txt-to-pot.sh: use the $( ... ) construct for command substitution
git-gui (Windows): use git-gui.exe in `Create Desktop Shortcut`
git-gui: fix detection of Cygwin
Amend tab ordering and text widget border and highlighting.
Allow keyboard control to work in the staging widgets.
...
This is the only place in the documentation that the traditional layout
is mentioned, and it is confusing. Remove it.
* Documentation/git-tag.txt: Here.
Signed-off-by: Younes Khoudli <younes.khoudli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An "add --chmod=+x" test recently added by 610d55af0f ("add: modify
already added files when --chmod is given", 2016-09-14) used "xfoo3"
as a test file. The paths xfoo[1-3] were used by earlier tests for
symbolic links but they were expected to have been removed by the
time the execution reached this new test.
The removal with "git reset --hard" however happened in a pair of
earlier tests, both of which are protected by POSIXPERM,SANITY
prerequisites. Platforms and test environments that lacked these
would have seen xfoo3 as a leftover symbolic link that points at
somewhere else at this point of the sequence, and the chmod test
would have given a wrong result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4d7bc52b17 ("submodule update: allow '.' for branch value",
2016-08-03) adopted from Gerrit a feature to set "." as a special
value of "submodule.<name>.branch" in .gitmodules file to indicate
that the tracking branch in the submodule should be the same as the
current branch in the superproject.
Update the documentation to describe this.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark rename_limit_warning and degrade_cc_to_c_warning and
rename_limit_warning for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark error messages about CRLF for translation.
Update test to reflect changes.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "test-parse-options --expect" to rewrite the tests to avoid checking
the whole variable dump by just testing what is required.
This commit is a follow-up to 8ca65aebad ("t0040: convert a few
tests to use test-parse-options --expect", 2016-05-06).
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allocate and copy directly in FLEXPTR_ALLOC_MEM and remove the now
unused helper function xalloc_flex(). The resulting code is shorter
and the offset arithmetic is a bit simpler.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calculating offsets involving a NULL pointer is undefined. It works in
practice (for now?), but we should not rely on it. Allocate first and
then simply refer to the flexible array member by its name instead of
performing pointer arithmetic up front. The resulting code is slightly
shorter, easier to read and doesn't rely on undefined behaviour.
NB: The cast to a (non-const) void pointer is necessary to keep support
for flexible array members declared as const.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
