Case insensitivity plays a role in several tests and is tested in several
tests. Therefore, move the test from t003 into the test lib and use the
prerequisite in t0003.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few more advices that we often have to give to new test
writers.
Also update an example where a double quote pair is used to enclose
a test body to use a single quote pair, which is more readable and
more importantly gives saner semantics for variable substitution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm no longer running the Git smoke testing service at
smoke.git.nix.is due to Smolder being a fragile piece of software not
having time to follow through on making it easy for third parties to
run and submit their own smoke tests.
So remove the support in Git for sending smoke tests to
smoke.git.nix.is, it's still easy to modify the test suite to submit
smokes somewhere else.
This reverts the following commits:
Revert "t/README: Add SMOKE_{COMMENT,TAGS}= to smoke_report target" -- e38efac87d
Revert "t/README: Document the Smoke testing" -- d15e9ebc5c
Revert "t/Makefile: Create test-results dir for smoke target" -- 617344d77b
Revert "tests: Infrastructure for Git smoke testing" -- b6b84d1b74
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 781f76b15 (test-lib: redirect stdin of tests) you can't simply put a
"bash &&" into a test for debugging purposes anymore. Instead you'll have
to use "bash <&6 >&3 2>&4".
As that invocation is not that easy to remember add the test_pause
convenience function. It invokes "$SHELL_PATH" to provide a sane shell
for the user.
This function also checks if the -v flag is given and will error out if
that is not the case instead of letting the test hang until ^D is pressed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
This modest patch adds simple tests for git grep -P/--perl-regexp and
its interoperation with -i and -w.
Tests are only enabled when prerequisite LIBPCRE is defined (it's
automatically set based on USE_LIBPCRE in test-lib.sh).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document all test function arguments in the same way.
While at it, tweak the description of test_path_is_* (thanks to Junio),
and correct some grammatical errors.
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
* maint:
Update draft release notes to 1.7.4.2
Work around broken ln on solaris as used in t8006
t/README: Add a note about running commands under valgrind
The test suite runs valgrind with certain options activated. Add a
note saying how to run commands under the same conditions as the test
suite does.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds just a "do it this way" instruction without a lot of explanation,
because the details are too complex to be explained at this point.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests check their output with code like the following:
test "$(git ls-files -u B | wc -l)" -eq 3 || {
echo "BAD: should have left stages for B"
return 1
}
The verbose failure condition is used because test, unlike
diff, does not print any useful information about the
nature of the failure when it fails.
Introduce a test_line_count function to help. If used like
git ls-files -u B >output &&
test_line_count -eq 3 output
it will produce output like
test_line_count: line count for output !-eq 3
100644 b023018cabc396e7692c70bbf5784a93d3f738ab 2 hi.c
100644 45b983be36b73c0788dc9cbcb76cbb80fc7bb057 3 hi.c
on failure.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can run "make DEFAULT_TEST_TARGET=prove test" to run the test under
"prove" (or $(PROVE) if set). The output is a bit easier to read when
running many tests in parallel.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Liked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change test_expect_code to be a normal test command instead of a
top-level command.
As a top-level command it would fail in cases like:
test_expect_code 1 'phoney' '
foo && bar && (exit 1)
'
Here the test might incorrectly succeed if "foo" or "bar" happened to
fail with exit status 1. Instead we now do:
test_expect_success 'phoney' '
foo && bar && test_expect_code 1 "(exit 1)"
'
Which will only succeed if "foo" and "bar" return status 0, and "(exit
1)" returns status 1. Note that test_expect_code has been made slightly
noisier, as it reports the exit code it receives even upon success.
Some test code in t0000-basic.sh relied on the old semantics of
test_expect_code to test the test_when_finished command. I've
converted that code to use an external test similar to the TODO test I
added in v1.7.3-rc0~2^2~3.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
The example I initially added to "Skipping tests" wasn't very
good. We'd rather skip tests using the three-arg prereq form to the
test_* functions, not bail out with a skip message.
Change the documentation to reflect that, but retain the bailout
example under a disclaimer which explains that it's probably not a
good idea to use it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having no coverage at all is almost always a bad sign, but trying to
attain 100% coverage everywhere is usually a waste of time. Add a
paragraph to explain this to future test writers.
Inspired-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how test writers can generate coverage reports, to ensure
that their tests are really testing the code they think they're
testing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The smoke server supports a free form text field with comments about a
report, and a comma delimited list of tags. Change the smoke_report
target to expose this functionality. Now smokers can send more data
that explains and categorizes the reports they're submitting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git now has a smoke testing service at http://smoke.git.nix.is that
anyone can send reports to. Change the t/README file to mention this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The README for the test library suggested that you grep the
test-lib.sh for test_set_prereq to see what the preset prerequisites
were.
Remove that bit, and write a section explaining all the preset
prerequisites. Most of the text was lifted from from Junio C Hamano
and Johannes Sixt, See the "Tests in Cygwin" thread in May 2009 for
the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_have_prereq function in test-lib.sh to support a
comma-separated list of prerequisites. This is useful for tests that
need e.g. both POSIXPERM and SANITY.
The implementation was stolen from Junio C Hamano and Johannes Sixt,
the tests and documentation were not. See the "Tests in Cygwin" thread
in May 2009 for the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper functions are implemented, documented, and used in a few
places to validate them, but not everywhere to avoid useless code churn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct advice should have been taken from c289c31 (t/t7006: ignore
return status of shell's unset builtin, 2010-06-02). A real-life issue
we experienced was with "unset", not with "export" (exporting an
unset variable may have similar portability issues, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some have found the wording of the description to be somewhat ambiguous
with respect to when it is desirable to use test_must_fail instead of
"! <git-command>". Tweak the wording somewhat to hopefully clarify that
it is _because_ test_must_fail can detect segmentation fault that it is
desirable to use it instead of "! <git-command>".
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no documentation in t/README for test_must_fail,
test_might_fail, test_cmp, or test_when_finished.
Reported-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "Do's, don'ts & things to keep in mind" subsection to the
"Writing Tests" documentation. Much of this is based on Junio C
Hamano's "Test your stuff" section in
<7vhbkj2kcr.fsf@alter.siamese.dyndns.org>.
I turned it into a list of do's and don'ts to make it easier to skim
it, and integrated my note that a TAP harness will get confused if you
print "ok" or "not ok" at the beginning of a line.
Thad had to be fixed in 335f87871f when
TAP support was introduced.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_expect_code (which was introduced in d3bfdb75) never had any
documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was do documentation for the test_external_without_stderr and
test_external functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no documentation for the test_set_prereq and
test_have_prereq functions, or the three-arg form of
test_expect_success and test_expect_failure.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a unique trash directory for each test, not a single directory
as the previous documentation suggested.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've had this option since f423ef5 (tests: allow user to specify
trash directory location, 2009-08-09). Make it easier to look up :-)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only put bin-wrappers in the PATH (not GIT_EXEC_PATH), to emulate the
default installed user environment, and ensure all the programs run
correctly in such an environment. This is now the default, although
it can be overridden with a --with-dashes test option when running
tests.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added without documentation in 2009-03-16 (6720721).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make much sense to run the (expensive) valgrind tests and
not look at the output.
To prevent output from scrolling out of reach, the parameter --tee is
implied, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tests are run in parallel and a few tests fail, it does not help
that the output of the terminal is totally confusing, as you rarely know
which test which line came from.
So introduce the option '--tee' which triggers that the output of the
tests will be written to t/test-results/$TEST.out in addition to the
terminal, where $TEST is the basename of the script.
Unfortunately, there seems to be no way to redirect a given file
descriptor to a specified subprocess in POSIX shell, only redirection
to a file is supported via 'exec > $FILE'.
At least with bash, one might think that 'exec >($COMMAND)' would work
as intended, but it does not.
The common way to work around the lack of proper tools support is to
work with named pipes, alas, one of our most beloved platforms does not
really support named pipes. Besides, we would need a pipe for every
script, as the whole point of this patch is to allow parallel execution.
Therefore, we handle the redirection in the following way: when '--tee'
was passed to the test script, the variable GIT_TEST_TEE_STARTED is set
(to avoid triggering that code path again) and the script is started
_again_, in a subshell, redirected to the command "tee".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the ability to use valgrind's memcheck tool to
diagnose memory problems in Git while running the test scripts.
It requires valgrind 3.4.0 or newer.
It works by creating symlinks to a valgrind script, which have the same
name as our Git binaries, and then putting that directory in front of
the test script's PATH as well as set GIT_EXEC_PATH to that directory.
Git scripts are symlinked from that directory directly.
That way, Git binaries called by Git scripts are valgrinded, too.
Valgrind can be used by specifying "GIT_TEST_OPTS=--valgrind" in the
make invocation. Any invocation of git that finds any errors under
valgrind will exit with failure code 126. Any valgrind output will go
to the usual stderr channel for tests (i.e., /dev/null, unless -v has
been specified).
If you need to pass options to valgrind -- you might want to run
another tool than memcheck, for example -- you can set the environment
variable GIT_VALGRIND_OPTIONS.
A few default suppressions are included, since libz seems to trigger
quite a few false positives. We'll assume that libz works and that we
can ignore any errors which are reported there.
Note: it is safe to run the valgrind tests in parallel, as the links in
t/valgrind/bin/ are created using proper locking.
Initial patch and all the hard work by Jeff King.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we just need to add a commit with a given (short) name, that will
be tagged with the same name. Now, relatively complicated graphs can be
constructed easily and in a clear fashion:
test_commit A &&
test_commit B &&
git checkout A &&
test_commit C &&
test_merge D B
will construct this graph:
A - B
\ \
C - D
For simplicity, files whose name is the lower case version of the commit
message (to avoid a warning about ambiguous names) will be committed, with
the corresponding commit messages as contents.
If you need to provide a different file/different contents, you can use
the more explicit form
test_commit $MESSAGE $FILENAME $CONTENTS
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
