When removing many branches and tags, the code used to do so one
ref at a time. There is another API it can use to delete multiple
refs, and it makes quite a lot of performance difference when the
refs are packed.
* ph/use-delete-refs:
use delete_refs when deleting tags or branches
'git tag -d' accepts one or more tag refs to delete, but each deletion
is done by calling `delete_ref` on each argv. This is very slow when
removing from packed refs. Use delete_refs instead so all the removals
can be done inside a single transaction with a single update.
Do the same for 'git branch -d'.
Since delete_refs performs all the packed-refs delete operations
inside a single transaction, if any of the deletes fail then all
them will be skipped. In practice, none of them should fail since
we verify the hash of each one before calling delete_refs, but some
network error or odd permissions problem could have different results
after this change.
Also, since the file-backed deletions are not performed in the same
transaction, those could succeed even when the packed-refs transaction
fails.
After deleting branches, remove the branch config only if the branch
ref was removed and was not subsequently added back in.
A manual test deleting 24,000 tags took about 30 minutes using
delete_ref. It takes about 5 seconds using delete_refs.
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in
28438e84e0 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288 (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
1. https://en.wikipedia.org/wiki/Chinese_punctuation#Marks_similar_to_European_punctuation
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the reverse/ignore_case/version sort flags in the ref_sorting
struct into a bitfield. Having three of them was already a bit
unwieldy, but it would be even more so if another flag needed a
function like ref_sorting_icase_all() introduced in
76f9e569ad (ref-filter: apply --ignore-case to all sorting keys,
2020-05-03).
A follow-up change will introduce such a flag, so let's move this over
to a bitfield. Instead of using the usual '#define' pattern I'm using
the "enum" pattern from builtin/rebase.c's b4c8eb024a (builtin
rebase: support --quiet, 2018-09-04).
Perhaps there's a more idiomatic way of doing the "for each in list
amend mask" pattern than this "mask/on" variable combo. This function
doesn't allow us to e.g. do any arbitrary changes to the bitfield for
multiple flags, but I think in this case that's fine. The common case
is that we're calling this with a list of one.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has never been a "git branch --local", this is just a typo for
"--list". Fixes a comment added in 23e714df91 (branch: roll
show_detached HEAD into regular ref_list, 2015-09-23).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our users are going to be trained to prepare for future change of
init.defaultBranch configuration variable.
* js/init-defaultbranch-advice:
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
In one of the next commits, we would like to give users some advice
regarding the initial branch name, and how to modify it.
To that end, it would be good if `git branch -m <name>` worked in a
freshly initialized repository without any commits. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will extend the flexibility of the config API. Before doing so, let's
take an existing 'int multi_replace' parameter and replace it with a new
'unsigned flags' parameter that can take multiple options as a bit field.
Update all callers that specified multi_replace to now specify the
CONFIG_FLAGS_MULTI_REPLACE flag. To add more clarity, extend the
documentation of git_config_set_multivar_in_file() including a clear
labeling of its arguments. Other config API methods in config.h require
only a change of the final parameter from 'int' to 'unsigned'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable ref-filter to process multiple merged and no-merged filters, and
extend functionality to git branch, git tag and git for-each-ref. This
provides an easy way to check for branches that are "graduation
candidates:"
$ git branch --no-merged master --merged next
If passed more than one merged (or more than one no-merged) filter, refs
must be reachable from any one of the merged commits, and reachable from
none of the no-merged commits.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
Code clean-up around "git branch" with a minor bugfix.
* dl/branch-cleanup:
branch: don't mix --edit-description
t3200: test for specific errors
t3200: rename "expected" to "expect"
get_worktrees() accepts a 'flags' argument, however, there are no
existing flags (the lone flag GWT_SORT_LINKED was recently retired) and
no behavior which can be tweaked. Therefore, drop the 'flags' argument.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git branch` accepts `--edit-description` in conjunction with other
arguments. However, `--edit-description` is its own mode, similar to
`--set-upstream-to`, which is also made mutually exclusive with other
modes. Prevent `--edit-description` from being mixed with other modes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" and other "for-each-ref" variants accepted multiple
--sort=<key> options in the increasing order of precedence, but it
had a few breakages around "--ignore-case" handling, and tie-breaking
with the refname, which have been fixed.
* jk/for-each-ref-multi-key-sort-fix:
ref-filter: apply fallback refname sort only after all user sorts
ref-filter: apply --ignore-case to all sorting keys
All of the ref-filter users (for-each-ref, branch, and tag) take an
--ignore-case option which makes filtering and sorting case-insensitive.
However, this option was applied only to the first element of the
ref_sorting list. So:
git for-each-ref --ignore-case --sort=refname
would do what you expect, but:
git for-each-ref --ignore-case --sort=refname --sort=taggername
would sort the primary key (taggername) case-insensitively, but sort the
refname case-sensitively. We have two options here:
- teach callers to set ignore_case on the whole list
- replace the ref_sorting list with a struct that contains both the
list of sorting keys, as well as options that apply to _all_
keys
I went with the first one here, as it gives more flexibility if we later
want to let the users set the flag per-key (presumably through some
special syntax when defining the key; for now it's all or nothing
through --ignore-case).
The new test covers this by sorting on both tagger and subject
case-insensitively, which should compare "a" and "A" identically, but
still sort them before "b" and "B". We'll break ties by sorting on the
refname to give ourselves a stable output (this is actually supposed to
be done automatically, but there's another bug which will be fixed in
the next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list" learned to show branches that are checked out
in other worktrees connected to the same repository prefixed with
'+', similar to the way the currently checked out branch is shown
with '*' in front.
* nb/branch-show-other-worktrees-head:
branch: add worktree info on verbose output
branch: update output to include worktree info
ref-filter: add worktreepath atom
The availability of these pattern selections is not obvious from
the man pages, as per mail thread <87lfz3vcbt.fsf@evledraar.gmail.com>.
Provide examples.
Re-order the `git branch` synopsis to emphasise the `--list <pattern>`
pairing. Also expand and reposition the `all/remotes` options.
Split the over-long description into three parts so that the <pattern>
description can be seen.
Clarify that the `all/remotes` options require the --list if patterns
are to be used.
Add examples of listing remote tracking branches that match a pattern,
including `git for-each-ref` which has more options.
Improve the -a/-r warning message. The message confused this author
as the combined -a and -r options had not been given, though a pattern
had. Specifically guide the user that maybe they needed the --list
option to enable a remote branch pattern selection.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To display worktree path for refs checked out in a linked worktree
Signed-off-by: Nickolai Belakovski <nbelakovski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git branch is modified to mark branches checked out in a
linked worktree with a "+" and color them in cyan (in contrast to the
current branch, which will still be denoted with a "*" and colored in green)
This is meant to communicate to the user that the branches that are
marked or colored will behave differently from other branches if the user
attempts to check them out or delete them, since branches checked out in
another worktree cannot be checked out or deleted.
Signed-off-by: Nickolai Belakovski <nbelakovski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--sort" parameter of for-each-ref, etc, does not handle negation,
and instead returns an error to the parse-options code. But neither
piece of code prints anything for the user, which may leave them
confused:
$ git for-each-ref --no-sort
$ echo $?
129
As the comment in the callback function notes, this probably should
clear the list, which would make it consistent with other list-like
options (i.e., anything that uses OPT_STRING_LIST currently).
Unfortunately that's a bit tricky due to the way the ref-filter code
works. But in the meantime, let's at least make the error a little less
confusing:
- switch to using PARSE_OPT_NONEG in the option definition, which will
cause the options code to produce a useful message
- since this was cut-and-pasted to four different spots, let's define
a single OPT_REF_SORT() macro that we can use everywhere
- the callback can use BUG_ON_OPT_NEG() to make sure the correct flags
are used (incidentally, this also satisfies -Wunused-parameters,
since we're now looking at "unset")
- expand the comment into a NEEDSWORK to make it clear that the
direction is right, but the details need to be worked out
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When called with --show-current, git branch will print the current
branch name and terminate. Only the actual name gets printed,
without refs/heads. In detached HEAD state, nothing is output.
Intended both for scripting and interactive/informative use.
Unlike git branch --list, no filtering is needed to just get the
branch name.
Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch_get sometimes returns current_branch, which can be NULL (e.g., if
you're on a detached HEAD). Try:
$ git branch HEAD
fatal: no such branch 'HEAD'
$ git branch ''
fatal: no such branch ''
However, it seems weird that we'd check those cases here (and provide
such lousy messages). And indeed, dropping that and letting us
eventually hit create_branch() gives a much better message:
$ git branch HEAD
fatal: 'HEAD' is not a valid branch name.
$ git branch ''
fatal: '' is not a valid branch name.
Signed-off-by: Tao Qingyun <taoqy@ls-a.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
Updated plan to repurpose the "-l" option to "git branch".
* jk/branch-l-1-repurpose:
doc/git-branch: remove obsolete "-l" references
branch: make "-l" a synonym for "--list"
Add support for configuring default sort ordering for git branches. Command
line option will override this configured value, using the exact same
syntax.
Signed-off-by: Samuel Maftoul <samuel.maftoul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-l" option in "git branch -l" is an unfortunate short-hand for
"--create-reflog", but many users, both old and new, somehow expect
it to be something else, perhaps "--list". This step warns when "-l"
is used as a short-hand for "--create-reflog" and warns about the
future repurposing of the it when it is used.
* jk/branch-l-0-deprecation:
branch: deprecate "-l" option
t: switch "branch -l" to "branch --create-reflog"
t3200: unset core.logallrefupdates when testing reflog creation
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
The other "mode" options of git-branch have short-option
aliases that are easy to type (e.g., "-d" and "-m"). Let's
give "--list" the same treatment.
This also makes it consistent with the similar "git tag -l"
option.
We didn't do this originally because "--create-reflog" was
squatting on the "-l" option. Now that we've deprecated that
use for long enough, we can make the switch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-l" option is short for "--create-reflog". This has
caused much confusion over the years. Most people expect it
to work as "--list", because that would match the other
"mode" options like -d/--delete and -m/--move, as well as
the similar -l/--list option of git-tag.
Adding to the confusion, using "-l" _appears_ to work as
"--list" in some cases:
$ git branch -l
* master
because the branch command defaults to listing (so even
trying to specify --list in the command above is redundant).
But that may bite the user later when they add a pattern,
like:
$ git branch -l foo
which does not return an empty list, but in fact creates a
new branch (with a reflog, naturally) called "foo".
It's also probably quite uncommon for people to actually use
"-l" to create a reflog. Since 0bee591869 (Enable reflogs by
default in any repository with a working directory.,
2006-12-14), this is the default in non-bare repositories.
So it's rather unfortunate that the feature squats on the
short-and-sweet "-l" (which was only added in 3a4b3f269c
(Create/delete branch ref logs., 2006-05-19), meaning there
were only 7 months where it was actually useful).
Let's deprecate "-l" in hopes of eventually re-purposing it
to "--list".
Note that we issue the warning only when we're not in list
mode. This means that people for whom it works as a happy
accident, namely:
$ git branch -l
master
won't see the warning at all. And when we eventually switch
to it meaning "--list", that will just continue to work.
We do the issue the warning for these important cases:
- when we are actually creating a branch, in case the user
really did mean it as "--create-reflog"
- when we are in some _other_ mode, like deletion. There
the "-l" is a noop for now, but it will eventually
conflict with any other mode request, and the user
should be told that this is changing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the obvious consensus of hyphenated "remote-tracking branch", and
fix an obvious typo, all in documentation and comments.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
Sometimes it helps to list all available config vars so the user can
search for something they want. The config man page can also be used
but it's harder to search if you want to focus on the variable name,
for example.
This is not the best way to collect the available config since it's
not precise. Ideally we should have a centralized list of config in C
code (pretty much like 'struct option'), but that's a lot more work.
This will do for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard coding the name-to-id mapping in C code, keep it in an
array and use a common function to do the parsing. This reduces code
and also allows us to list all possible color slots later.
This starts using C99 designated initializers more for convenience
(the first designated initializers have been introduced in builtin/clean.c
for some time without complaints)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only thing these commands need is extra parseopt flag which can be
passed in by OPT_SET_INT_F() and it is a bit more compact than full
struct initialization.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code restructuring, in preparation for further work.
* ot/libify-get-ref-atom-value:
ref-filter: libify get_ref_atom_value()
ref-filter: add return value to parsers
ref-filter: change parsing function error handling
ref-filter: add return value && strbuf to handlers
ref-filter: start adding strbufs with errors
ref-filter: add shortcut to work with strbufs
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (36 commits)
convert: convert to struct object_id
sha1_file: introduce a constant for max header length
Convert lookup_replace_object to struct object_id
sha1_file: convert read_sha1_file to struct object_id
sha1_file: convert read_object_with_reference to object_id
tree-walk: convert tree entry functions to object_id
streaming: convert istream internals to struct object_id
tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
builtin/notes: convert static functions to object_id
builtin/fmt-merge-msg: convert remaining code to object_id
sha1_file: convert sha1_object_info* to object_id
Convert remaining callers of sha1_object_info_extended to object_id
packfile: convert unpack_entry to struct object_id
sha1_file: convert retry_bad_packed_offset to struct object_id
sha1_file: convert assert_sha1_type to object_id
builtin/mktree: convert to struct object_id
streaming: convert open_istream to use struct object_id
sha1_file: convert check_sha1_signature to struct object_id
sha1_file: convert read_loose_object to use struct object_id
builtin/index-pack: convert struct ref_delta_entry to object_id
...
