This is trying to implement the strict IO error checks that Jim Meyering
suggested, but explicitly limits it to just regular files. If a pipe gets
closed on us, we shouldn't complain about it.
If the subcommand already returned an error, that takes precedence (and we
assume that the subcommand already printed out any relevant messages
relating to it)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should change no code at all, it just moves the definition of "struct
cmd_struct" out, and then splits out the running of the right command into
the "run_command()" function.
It also removes the long-unused 'envp' pointer passing.
This is just preparation for adding some more error checking.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases changing environment variables (GIT_DIR or
GIT_WORK_TREE) can cause problems:
git has to use GIT_DIR to read the aliases from the config.
After running handle_options for the alias the options of the
alias may have changed environment variables. Depending on
the implementation of setenv the memory location obtained
through getenv earlier may contain the old value or the new
value (or even be used for something else?). To avoid these
problems git errors out if an alias uses any option which
changes environment variables.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up to now to check for a working tree this was used:
!is_bare && !inside_git_dir
(the check for bare is redundant because is_inside_git_dir
returned already 1 for bare repositories).
Now the check is:
inside_work_tree && !inside_git_dir
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.1:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
This adds the basic infrastructure to assign attributes to
paths, in a way similar to what the exclusion mechanism does
based on $GIT_DIR/info/exclude and .gitignore files.
An attribute is just a simple string that does not contain any
whitespace. They can be specified in $GIT_DIR/info/attributes
file, and .gitattributes file in each directory.
Each line in these files defines a pattern matching rule.
Similar to the exclusion mechanism, a later match overrides an
earlier match in the same file, and entries from .gitattributes
file in the same directory takes precedence over the ones from
parent directories. Lines in $GIT_DIR/info/attributes file are
used as the lowest precedence default rules.
A line is either a comment (an empty line, or a line that begins
with a '#'), or a rule, which is a whitespace separated list of
tokens. The first token on the line is a shell glob pattern.
The rest are names of attributes, each of which can optionally
be prefixed with '!'. Such a line means "if a path matches this
glob, this attribute is set (or unset -- if the attribute name
is prefixed with '!'). For glob matching, the same "if the
pattern does not have a slash in it, the basename of the path is
matched with fnmatch(3) against the pattern, otherwise, the path
is matched with the pattern with FNM_PATHNAME" rule as the
exclusion mechanism is used.
This does not define what an attribute means. Tying an
attribute to various effects it has on git operation for paths
that have it will be specified separately.
Signed-off-by: Junio C Hamano <junkio@cox.net>
handle_options did not count the number of used arguments
correctly. When --git-dir was used the extra argument was
not added to the number of handled arguments.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 64edf4b2 cleaned up the initialization of git-archive,
at the cost of 'git-archive --list' now requiring a git repo.
This patch reverts the cleanup and documents the requirement
for this particular dirtyness in a test.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fetch:
.gitignore: add git-fetch--tool
builtin-fetch--tool: fix reflog notes.
git-fetch: retire update-local-ref which is not used anymore.
builtin-fetch--tool: make sure not to overstep ls-remote-result buffer.
fetch--tool: fix uninitialized buffer when reading from stdin
builtin-fetch--tool: adjust to updated sha1_object_info().
git-fetch--tool takes flags before the subcommand.
Use stdin reflist passing in git-fetch.sh
Use stdin reflist passing in parse-remote
Allow fetch--tool to read from stdin
git-fetch: rewrite expand_ref_wildcard in C
git-fetch: rewrite another shell loop in C
git-fetch: move more code into C.
git-fetch--tool: start rewriting parts of git-fetch in C.
git-fetch: split fetch_main into fetch_dumb and fetch_native
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
* np/types: (253 commits)
get rid of lookup_object_type()
convert object type handling from a string to a number
formalize typename(), and add its reverse type_from_string()
sha1_file.c: don't ignore an error condition in sha1_loose_object_info()
sha1_file.c: cleanup "offset" usage
sha1_file.c: cleanup hdr usage
git-apply: do not fix whitespaces on context lines.
diff --cc: integer overflow given a 2GB-or-larger file
mailinfo: do not get confused with logical lines that are too long.
Documentation: link in 1.5.0.2 material to the top documentation page.
Documentation: document remote.<name>.tagopt
GIT 1.5.0.2
git-remote: support remotes with a dot in the name
Documentation: describe "-f/-t/-m" options to "git-remote add"
diff --cc: fix display of symlink conflicts during a merge.
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
diff --cached: give more sensible error message when HEAD is yet to be created.
Update tests to use test-chmtime
Add test-chmtime: a utility to change mtime on files
...
* master: (201 commits)
Documentation: link in 1.5.0.2 material to the top documentation page.
Documentation: document remote.<name>.tagopt
GIT 1.5.0.2
git-remote: support remotes with a dot in the name
Documentation: describe "-f/-t/-m" options to "git-remote add"
diff --cc: fix display of symlink conflicts during a merge.
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
diff --cached: give more sensible error message when HEAD is yet to be created.
Update tests to use test-chmtime
Add test-chmtime: a utility to change mtime on files
Add Release Notes to prepare for 1.5.0.2
Allow arbitrary number of arguments to git-pack-objects
rerere: do not deal with symlinks.
rerere: do not skip two conflicted paths next to each other.
Don't modify CREDITS-FILE if it hasn't changed.
diff-patch: Avoid emitting double-slashes in textual patch.
Reword git-am 3-way fallback failure message.
Limit filename for format-patch
core.legacyheaders: Use the description used in RelNotes-1.5.0
...
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.
git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.
The original patch was done by Mark Levedahl <mdl123@verizon.net>.
It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this flag and given two paths, git-diff-files behaves as a GNU diff
lookalike (plus the git goodies like --check, colour, etc.). This flag
is also available in git-diff. It also works outside of a git repository.
In addition, if git-diff{,-files} is called without revision or stage
parameter, and with exactly two paths at least one of which is not tracked,
the default is --no-index.
So, you can now say
git diff /etc/inittab /etc/fstab
and it actually works!
This also unifies the duplicated argument parsing between cmd_diff_files()
and builtin_diff_files().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the alias expansion is prefixed with an exclamation point, treat
it as a shell command which is run using system(3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch helps when you accidentally run something like git-clean
in the git directory instead of the work tree.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier change df391b192 to rename fsck-objects to fsck broke
fsck-objects. This should fix it again.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Starting a pager defeats the purpose of the incremental output
mode. This changes git-blame to only paginate if --incremental
was not given.
git -p blame --incremental still starts the pager, though.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/bare:
Disallow working directory commands in a bare repository.
git-fetch: allow updating the current branch in a bare repository.
Introduce is_bare_repository() and core.bare configuration variable
Move initialization of log_all_ref_updates
If the user tries to run a porcelainish command which requires
a working directory in a bare repository they may get unexpected
results which are difficult to predict and may differ from command
to command.
Instead we should detect that the current repository is a bare
repository and refuse to run the command there, as there is no
working directory associated with it.
[jc: updated Shawn's original somewhat -- bugs are mine.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make "init" the equivalent of "init-db". This should make first GIT
impression a little more friendly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We tend to use the nice constant GIT_DIR_ENVIRONMENT when we
are referring to the "GIT_DIR" constant, but git.c didn't do
so. Now it does.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For easier portability we prefer PATH_MAX over seemingly random
constants like 1024. Make it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fsck-reflog:
Add git-reflog to .gitignore
reflog expire: do not punt on tags that point at non commits.
reflog expire: prune commits that are not incomplete
Don't crash during repack of a reflog with pruned commits.
git reflog expire
Move in_merge_bases() to commit.c
reflog: fix warning message.
Teach git-repack to preserve objects referred to by reflog entries.
Protect commits recorded in reflog from pruning.
add for_each_reflog_ent() iterator
The option checking code for --git-dir had an off by 1 error that
would cause it to access uninitialized memory if it was the last
argument. This causes it to display an error and display the usage
string instead.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The perl version used modules which are non-standard in some setups.
This patch brings the full power of rerere to a wider audience.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This prepares a place to collect reflog management subcommands,
and implements "expire" action.
$ git reflog expire --dry-run \
--expire=4.weeks \
--expire-unreachable=1.week \
refs/heads/master
The expiration uses two timestamps: --expire and --expire-unreachable.
Entries older than expire time (defaults to 90 days), and entries older
than expire-unreachable time (defaults to 30 days) and records a commit
that has been rewound and made unreachable from the current tip of the
ref are removed from the reflog.
The parameter handling is still rough, but I think the
core logic for expiration is already sound.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
merge-file has the same syntax as RCS merge, but supports only the
"-L" option.
For good measure, a test is added, which is quite minimal, though.
[jc: further fix for compliation errors included.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On request of the kingpenguin, shortlog now uses the pager if output
goes to a tty.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: with minimum squelching of compiler warning under "-pedantic"
compilation options.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
* jc/web-blame:
gitweb: spell "blame --porcelain" with -p
blame: Document and add help text for -f, -n, and -p
gitweb: blame porcelain: lineno and orig lineno swapped
Remove git-annotate.perl and create a builtin-alias for git-blame
gitweb: use blame --porcelain
git-blame --porcelain
blame.c: move code to output metainfo into a separate function.
git-blame: --show-number (and -n)
git-blame: --show-name (and -f)
blame.c: whitespace and formatting clean-up.
Gitweb - provide site headers and footers
gitweb: blame: Mouse-over commit-8 shows author and date
gitweb: blame: print commit-8 on the leading row of a commit-block
Revert 954a618375
gitweb: prepare for repositories with packed refs.
gitweb: make leftmost column of blame less cluttered.
This replaces git-branch.sh with builtin-branch.c
The changes is basically a patch from Kristian Hgsberg, updated
to apply onto current 'next'
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces the shell script git-cherry with a version written in C.
The behaviour of the new version differs from the original in two
points: it has no long help any more, and it is handling the (optional)
third parameter a bit differently. Basically, it does the equivalent
of
ours=`git-rev-list $ours ^$limit ^$upstream`
instead of
ours=`git-rev-list $ours ^$limit`
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently it does what git-blame does, but only faster.
More importantly, its internal structure is designed to support
content movement (aka cut-and-paste) more easily by allowing
more than one paths to be taken from the same commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noted by Jiri Slaby, git-tar-tree --remote doesn't need to be run
from inside of a git archive. Since git-tar-tree is now only a
wrapper for git-archive, which calls setup_git_directory() as
needed, we should drop the flag RUN_SETUP.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Still not managed to understand git-send-mail sufficiently well to not
accidently miss of this list when I sending it to Junio
Signed-off-by: Alan Chandler <alan@chandlerfamily.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
* jc/lt-ref2-with-lt-refs:
Fix show-ref usage for --dereference.
Document git-show-ref [-s|--hash] option.
Add man page for git-show-ref
gitignore: git-show-ref is a generated file.
Use Linus' show ref in "git-branch.sh".
Add [-s|--hash] option to Linus' show-ref.
Teach "git checkout" to use git-show-ref
Add "git show-ref" builtin command
The command now issues a big deprecation warning message and runs
git-archive command with appropriate arguments.
git-tar-tree $tree_ish $base always forces $base to be the leading
directory name, so the --prefix parameter passed internally to
git-archive is a slash appended to it, i.e. "--prefix=$base/".
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-zip-tree can be safely removed because it was never part of a formal
release. This patch makes 'git-archive --format=zip' the one and only git
ZIP file creation command.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/refs: (58 commits)
git-pack-refs --prune
pack-refs: do not pack symbolic refs.
Tell between packed, unpacked and symbolic refs.
Add callback data to for_each_ref() family.
symbolit-ref: fix resolve_ref conversion.
Fix broken sha1 locking
fsck-objects: adjust to resolve_ref() clean-up.
gitignore: git-pack-refs is a generated file.
wt-status: use simplified resolve_ref to find current branch
Fix t1400-update-ref test minimally
Enable the packed refs file format
Make ref resolution saner
Add support for negative refs
Start handling references internally as a sorted in-memory list
gitweb fix validating pg (page) parameter
git-repack(1): document --window and --depth
git-apply(1): document --unidiff-zero
gitweb: fix warnings in PATH_INFO code and add export_ok/strict_export
upload-archive: monitor child communication even more carefully.
gitweb: export options
...
* lt/refs: (58 commits)
git-pack-refs --prune
pack-refs: do not pack symbolic refs.
Tell between packed, unpacked and symbolic refs.
Add callback data to for_each_ref() family.
symbolit-ref: fix resolve_ref conversion.
Fix broken sha1 locking
fsck-objects: adjust to resolve_ref() clean-up.
gitignore: git-pack-refs is a generated file.
wt-status: use simplified resolve_ref to find current branch
Fix t1400-update-ref test minimally
Enable the packed refs file format
Make ref resolution saner
Add support for negative refs
Start handling references internally as a sorted in-memory list
gitweb fix validating pg (page) parameter
git-repack(1): document --window and --depth
git-apply(1): document --unidiff-zero
gitweb: fix warnings in PATH_INFO code and add export_ok/strict_export
upload-archive: monitor child communication even more carefully.
gitweb: export options
...
This also adds some very rudimentary support for the notion of packed
refs. HOWEVER! At this point it isn't used to actually look up a ref
yet, only for listing them (ie "for_each_ref()" and friends see the
packed refs, but none of the other single-ref lookup routines).
Note how we keep two separate lists: one for the loose refs, and one for
the packed refs we read. That's so that we can easily keep the two apart,
and read only one set or the other (and still always make sure that the
loose refs take precedence).
[ From this, it's not actually obvious why we'd keep the two separate
lists, but it's important to have the packed refs on their own list
later on, when I add support for looking up a single loose one.
For that case, we will want to read _just_ the packed refs in case the
single-ref lookup fails, yet we may end up needing the other list at
some point in the future, so keeping them separated is important ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jk/diff:
wt-status: remove extraneous newline from 'deleted:' output
git-status: document colorization config options
Teach runstatus about --untracked
git-commit.sh: convert run_status to a C builtin
Move color option parsing out of diff.c and into color.[ch]
diff: support custom callbacks for output
* jc/archive:
git-tar-tree: devolve git-tar-tree into a wrapper for git-archive
git-archive: inline default_parse_extra()
builtin-archive.c: rename remote_request() to extract_remote_arg()
upload-archive: monitor child communication more carefully.
Add sideband status report to git-archive protocol
Prepare larger packet buffer for upload-pack protocol.
Teach --exec to git-archive --remote
Add --verbose to git-archive
archive: force line buffered output to stderr
Use xstrdup instead of strdup in builtin-{tar,zip}-tree.c
Move sideband server side support into reusable form.
Move sideband client side support into reusable form.
archive: allow remote to have more formats than we understand.
git-archive: make compression level of ZIP archives configurable
Add git-upload-archive
git-archive: wire up ZIP format.
git-archive: wire up TAR format.
Add git-archive
This adds a new command, git-for-each-ref. You can have it iterate
over refs and have it output various aspects of the objects they
refer to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's kind of like "git peek-remote", but works only locally (and thus
avoids the whole overhead of git_connect()) and has some extra
verification features.
For example, it allows you to filter the results, and to choose whether
you want the tag dereferencing or not. You can also use it to just test
whether a particular ref exists.
For example:
git show-ref master
will show all references called "master", whether tags or heads or
anything else, and regardless of how deep in the reference naming
hierarchy they are (so it would show "refs/heads/master" but also
"refs/remote/other-repo/master").
When using the "--verify" flag, the command requires an exact ref path:
git show-ref --verify refs/heads/master
will only match the exact branch called "master".
If nothing matches, show-ref will return an error code of 1, and in the
case of verification, it will show an error message.
For scripting, you can ask it to be quiet with the "--quiet" flag, which
allows you to do things like
git-show-ref --quiet --verify -- "refs/heads/$headname" ||
echo "$headname is not a valid branch"
to check whether a particular branch exists or not (notice how we don't
actually want to show any results, and we want to use the full refname for
it in order to not trigger the problem with ambiguous partial matches).
To show only tags, or only proper branch heads, use "--tags" and/or
"--heads" respectively (using both means that it shows tags _and_ heads,
but not other random references under the refs/ subdirectory).
To do automatic tag object dereferencing, use the "-d" or "--dereference"
flag, so you can do
git show-ref --tags --dereference
to get a listing of all tags together with what they dereference.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
describe, git: Handle argc==0 case the same way as argc==1.
merge-tree: Refuse excessive arguments.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Call setup_git_directory() to make these commands work in subdirectory.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command implements the git archive protocol on the server
side. This command is not intended to be used by the end user.
Underlying git-archive command line options are sent over the
protocol from "git-archive --remote=...", just like upload-tar
currently does with "git-tar-tree=...".
As for "git-archive" command implementation, this new command
does not execute any existing "git-{tar,zip}-tree" but rely
on the archive API defined by "git-archive" patch. Hence we
get 2 good points:
- "git-archive" and "git-upload-archive" share all option
parsing code.
- All kind of git-upload-{tar,zip} can be deprecated.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.
Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.
- The first one is used to parse 'extra' parameters which have
signification only for the specific archiver. That would allow
different archive backends to have different kind of options.
- The second one is used to ask to an archive backend to build
the archive given some already resolved parameters.
The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?
It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.
The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:
$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD
We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This creates a new git-runstatus which should do roughly the same thing
as the run_status function from git-commit.sh. Except for color support,
the main focus has been to keep the output identical, so that it can be
verified as correct and then used as a C platform for other improvements to
the status printing code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some memory was allocated for a new path but not freed
after the path was used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-mv.c and git.c has a nested loop that is governed by a
variable 'i', but they shadow it with another instance of 'i'.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Convert git-verify-pack to a builtin command. Also rename ac to argc
and av to argv for consistancy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The semantics are equivalent to pushing from the root; we just try harder to
find the .git directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Matthias Kestenholz noted, the flag does not quite mean
"needs prefix" -- it is more like "run setup_git_directory()
before running this command", so rename it to avoid future
confusion.
While we are at it, rewrite the definition of options to make it
obvious that we are talking about flag bits by using standard (1<<n)
notation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the build procedure for built-in commands by:
- generating mostly redundant definition of BUILT_INS from
BUILTIN_OBJS in the Makefile,
- renaming a few files to make the above possible, and
- sorting the built-in command table in git.c.
It might be a good idea to binary search (or perfect hash) the built-in
command table, but that can be done later when somebody feels like.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The cmd_usage() routine was causing warning messages due to a NULL
format parameter being passed in three out of four calls. This is a
problem if you want to compile with -Werror. A simple solution is to
simply remove the GNU __attribute__ format pragma from the cmd_usage()
declaration in the header file. The function interface was somewhat
muddled anyway, so re-write the code to finesse the problem.
[jc: this incidentally revealed that t9100 test assumed that the output
from "git help" to be fixed in stone, but this patch lower-cases
"Usage" to "usage". Update the test not to rely on "git help" output.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the built-in "always-use-pager" logic for log family
to the command dispatch table of git wrapper. This makes it
easier to change the default use of pager, and has an added
benefit that we fork and exec the pager early before packs are
mmapped.
Pointed out by Juergen Ruehle <j.ruehle@bmiag.de>.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, the configuration mechanism can be used to say:
[alias]
init = init-db --template=/path/to/template
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merges the new built-in calling convention code into Johannes's
builtin-mv topic in order to resolve their conflicts early on.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also moves add_file_to_index() to read-cache.c. Oh, and while
touching builtin-add.c, it also removes a duplicate git_config() call.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, you can say
git --bare repack -a -d
inside a bare repository, and it will actually work. While at it,
also move the --version, --help and --exec-path options to the
handle_options() function.
While at documenting the new options, also document the --paginate
option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, something like
[alias]
pd = -p diff
works as expected.
[jc: a follow-up fix from Jeff King folded in.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
This allows you to say:
git -p diff v2.6.16-rc5..
and the command pipes the output of any git command to your pager.
[jc: this resurrects a month old RFC patch with improvement
suggested by Linus to call it --paginate instead of --less.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the environment variable GIT_TRACE set git will show
- alias expansion
- built-in command execution
- external command execution
on stderr.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This actually removes the objects to be pruned, unless you specify "-n"
(at which point it will just tell you which files it would prune).
This doesn't do the pack-file pruning that the shell-script used to do,
but if somebody really wants to, they could add it easily enough. I wonder
how useful it is, though, considering that "git repack -a -d" is just a
lot more efficient and generates a better end result.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git.c:main() relies on the value of errno being set by the last attempt to
execute the command. However, if something goes awry in handle_alias(),
that assumption is wrong. So restore errno before returning from
handle_alias().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the command execution by execv_git_cmd() fails with an errno
other than ENOENT, we used an uninitialized variable instead of
the string that holds the command name to report what failed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When extra command line arguments are given to a command that
was alias-expanded, the code generated a wrong argument list,
leaving the original alias in the result, and forgetting to
terminate the new argv list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
By being an internal command git-get-commit-id can make use of
struct ustar_header and other stuff and stops wasting precious
disk space.
Note: I recycled one of the two "tar-tree" entries instead of
splitting that cleanup into a separate patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This disables alias "foo" from being used for git-foo, and when
we do use alias we check the built-in and then existing command
names first and then alias as the fallback. This avoids the
problem of common commands used in scripts getting clobbered by
user specific aliases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[alias]
l = "log --stat -M ORIG_HEAD.."
you can call
git l
and it will do the same as
git log --stat -M ORIG_HEAD..
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes "git format-patch" a built-in.
* js/fmt-patch:
git-rebase: use canonical A..B syntax to format-patch
git-format-patch: now built-in.
fmt-patch: Support --attach
fmt-patch: understand old <his> notation
Teach fmt-patch about --keep-subject
Teach fmt-patch about --numbered
fmt-patch: implement -o <dir>
fmt-patch: output file names to stdout
Teach fmt-patch to write individual files.
Use RFC2822 dates from "git fmt-patch".
git-fmt-patch: thinkofix to show [PATCH] properly.
rename internal format-patch wip
Minor tweak on subject line in --pretty=email
Tentative built-in format-patch.
This makes 'git add' and 'git rm' built-ins.
* lt/dirwalk:
Add builtin "git rm" command
Move pathspec matching from builtin-add.c into dir.c
Prevent bogus paths from being added to the index.
builtin-add: fix unmatched pathspec warnings.
Remove old "git-add.sh" remnants
builtin-add: warn on unmatched pathspecs
Do "git add" as a builtin
Clean up git-ls-file directory walking library interface
libify git-ls-files directory traversal
* master: (119 commits)
diff family: add --check option
Document that "git add" only adds non-ignored files.
Add a conversion tool to migrate remote information into the config
fetch, pull: ask config for remote information
Fix build procedure for builtin-init-db
read-tree -m -u: do not overwrite or remove untracked working tree files.
apply --cached: do not check newly added file in the working tree
Implement a --dry-run option to git-quiltimport
Implement git-quiltimport
Revert "builtin-grep: workaround for non GNU grep."
builtin-grep: workaround for non GNU grep.
builtin-grep: workaround for non GNU grep.
git-am: use apply --cached
apply --cached: apply a patch without using working tree.
apply --numstat: show new name, not old name.
Documentation/Makefile: create tarballs for the man pages and html files
Allow pickaxe and diff-filter options to be used by git log.
Libify the index refresh logic
Builtin git-init-db
Remove unnecessary local in get_ref_sha1.
...
This makes tar-tree a built-in. As an added bonus, you can now
say:
git tar-tree --remote=remote-repository <ent> [<base>]
This does not work with git-daemon yet, but should work with
localhost and git over ssh transports.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes semantics very subtly, because it adds a new atomicity
guarantee.
In particular, if you "git rm" several files, it will now do all or
nothing. The old shell-script really looped over the removed files one by
one, and would basically randomly fail in the middle if "-f" was used and
one of the files didn't exist in the working directory.
This C builtin one will not re-write the index after each remove, but
instead remove all files at once. However, that means that if "-f" is used
(to also force removal of the file from the working directory), and some
files have already been removed from the workspace, it won't stop in the
middle in some half-way state like the old one did.
So what happens is that if the _first_ file fails to be removed with "-f",
we abort the whole "git rm". But once we've started removing, we don't
leave anything half done. If some of the other files don't exist, we'll
just ignore errors of removal from the working tree.
This is only an issue with "-f", of course.
I think the new behaviour is strictly an improvement, but perhaps more
importantly, it is _different_. As a special case, the semantics are
identical for the single-file case (which is the only one our test-suite
seems to test).
The other question is what to do with leading directories. The old "git
rm" script didn't do anything, which is somewhat inconsistent. This one
will actually clean up directories that have become empty as a result of
removing the last file, but maybe we want to have a flag to decide the
behaviour?
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Basically this just renames init-db.c to builtin-init-db.c and makes
some strings const.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was surprisingly easy. The diff is truly minimal: rename "main()" to
"cmd_rev_list()" in rev-list.c, and rename the whole file to reflect its
new built-in status.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
First try. Let's see how well this works.
In many ways, the hard parts of "git commit" are not so different from
this, and a builtin commit would share a lot of the code, I think.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/grep: (22 commits)
Fix silly typo in new builtin grep
builtin-grep: unparse more command line options.
builtin-grep: use external grep when we can take advantage of it
builtin-grep: -F (--fixed-strings)
builtin-grep: -w fix
builtin-grep: typofix
builtin-grep: tighten argument parsing.
builtin-grep: documentation
Teach -f <file> option to builtin-grep.
builtin-grep: -L (--files-without-match).
builtin-grep: binary files -a and -I
builtin-grep: terminate correctly at EOF
builtin-grep: tighten path wildcard vs tree traversal.
builtin-grep: support -w (--word-regexp).
builtin-grep: support -c (--count).
builtin-grep: allow more than one patterns.
builtin-grep: allow -<n> and -[ABC]<n> notation for context lines.
builtin-grep: printf %.*s length is int, not ptrdiff_t.
builtin-grep: do not use setup_revisions()
builtin-grep: support '-l' option.
...
* master: (109 commits)
t1300-repo-config: two new config parsing tests.
Another config file parsing fix.
update-index: plug memory leak from prefix_path()
checkout-index: plug memory leak from prefix_path()
update-index --unresolve: work from a subdirectory.
pack-object: squelch eye-candy on non-tty
core.prefersymlinkrefs: use symlinks for .git/HEAD
repo-config: trim white-space before comment
Fix for config file section parsing.
Clarify git-cherry documentation.
Update git-unpack-objects documentation.
Fix up docs where "--" isn't displayed correctly.
Several trivial documentation touch ups.
git-svn 1.0.0
git-svn: documentation updates
delta: stricter constness
Makefile: do not link rev-list any specially.
builtin-push: --all and --tags _are_ explicit refspecs
builtin-log/whatchanged/show: make them official.
show-branch: omit uninteresting merges.
...
This attempts to set up built-in "git grep" to further reduce
our dependence on the shell, while at the same time optionally
allowing to run grep against object database. You could do
funky things like these:
git grep --cached -e pattern ;# grep from index
git grep -e pattern master ;# or in a rev
git grep -e pattern master next ;# or in multiple revs
git grep -e pattern pu^@ ;# even like this with an
;# extension from another topic ;-)
git grep -e pattern master..next ;# or even from rev ranges
git grep -e pattern master~20:Documentation
;# or an arbitrary tree
git grep -e pattern next:git-commit.sh
;# or an arbitrary blob
Right now, it does not understand and/or obey many options grep
should accept, and the pattern must be given with -e option due
to the way the parameter parser is structured, both of which
obviously need to be fixed for usability.
But this is going in the right direction. The shell script
version is one of the worst Portability offender in the git
barebone Porcelainish; it uses xargs -0 to pass paths around and
shell arrays to sift flags and parameters.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also it learned to do -v (verbose) to report:
- number of loose objects
- disk occupied by loose objects
- number of objects in local packs
- number of loose objects that are also in pack
- unrecognised garbage in .git/objects/??/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I split out the builtin commands into their own files, I left the
include of <sys/ioctl.h> in git.c rather than moving it to the file that
needed it (builtin-help.c).
Nobody seems to have noticed, because everything still worked, but because
the TIOCGWINSZ macro was now no longer defined when compiling the
"term_columns()" function, it would no longer automatically notice the
terminal size unless your system used the ancient "COLUMNS" environment
variable approach.
Trivially fixed by just moving the header include to the file that
actually needs it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
Split up builtin commands into separate files from git.c
git-log produces no output
fix pack-object buffer size
mailinfo: decode underscore used in "Q" encoding properly.
Reintroduce svn pools to solve the memory leak.
pack-objects: do not stop at object that is "too small"
git-commit --amend: two fixes.
get_tree_entry(): make it available from tree-walk
sha1_name.c: no need to include diff.h; tree-walk.h will do.
sha1_name.c: prepare to make get_tree_entry() reusable from others.
get_sha1() shorthands for blob/tree objects
pre-commit hook: complain about conflict markers.
git-merge: a bit more readable user guidance.
diff: move diff.c to diff-lib.c to make room.
git log: don't do merge diffs by default
Allow "git repack" users to specify repacking window/depth
Document git-clone --reference
Fix filename scaling for binary files
Fix uninteresting tags in new revision parsing
Conflicts:
Adjusted the addition of fmt-patch to match the recent split
from git.c to builtin.log.c.
Right now it split it into "builtin-log.c" for log-related commands
("log", "show" and "whatchanged"), and "builtin-help.c" for the
informational commands (usage printing and "help" and "version").
This just makes things easier to read, I find.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I personally prefer "ignore_merges" to be on by default, because quite
often the merge diff is distracting and not interesting. That's true both
with "-p" and with "--stat" output.
If you want output from merges, you can trivially use the "-m", "-c" or
"--cc" flags to tell that you're interested in merges, which also tells
the diff generator what kind of diff to do (for --stat, any of the three
will do, of course, but they differ for plain patches or for
--patch-with-stat).
This trivial patch just removes the two lines that tells "git log" not to
ignore merges. It will still show the commit log message, of course, due
to the "always_show_header" part.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This only does --stdout right now. To write into separate files
with pretty-printed filenames like the real thing does, it needs
a bit mroe work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make sure "git show" always show the header, regardless of whether there
is a diff or not.
Also, make sure "always_show_header" actually works, since generate_header
only tested it in one out of three return paths.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the decision to print the log message, while diff
options are in effect, to log-tree. It gives behaviour closer
to the traditional one.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
pager: do not fork a pager if PAGER is set to empty.
diff-options: add --patch-with-stat
diff-files --stat: do not dump core with unmerged index.
Support "git cmd --help" syntax
diff --stat: do not do its own three-dashes.
diff-tree: typefix.
GIT v1.3.0-rc4
xdiff: post-process hunks to make them consistent.
This uses the "--no-walk" flag that I never actually implemented (but I'm
sure I mentioned it) to make "git show" be essentially the same thing as
"git whatchanged --no-walk".
It just refuses to add more interesting parents to the revision walking
history, so you don't actually get any history, you just get the commit
you asked for.
I was going to add "--no-walk" as a real argument flag to git-rev-list
too, but I'm not sure anybody actually needs it. Although it might be
useful for porcelain, so I left the door open.
[jc: ported to the unified option structure by Linus]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split internal "git log" into reusable piece and add "git
whatchanged". This is based on the option parsing unification
work Linus did.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merging all three option parsers related to whatchanged is
unarguably the right thing, but the fallout was too big to scare
me away. Let's try it once again, but once step at time.
This splits out init_revisions() call from setup_revisions(), so
that the callers can set different defaults to match the
traditional benaviour.
The rev-list command is still broken in a big way, which is the
topic of next step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "--help" argument is special, in that it is (along with "--version")
in that is taken by the "git" program itself rather than the sub-command,
and thus we've had the syntax "git --help cmd".
However, as anybody who has ever used CVS or some similar devil-spawn
program, it's confusing as h*ll when options before the sub-command act
differently from options after the sub-command, so this quick hack just
makes it acceptable to do "git cmd --help" instead, and get the exact same
result.
It may be hacky, but it's simple and does the trick.
Of course, this does not help if you use one of the non-builtin commands
without using the "git" helper. Ie you won't be getting a man-page just
because you do "git-rev-list --help". Don't expect us to be quite _that_
helpful.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I missed that "git-diff-* --stat" spits out three-dash separator
on its own without being asked. Remove it.
When we output commit log followed by diff, perhaps --patch-with-stat,
for downstream consumer, we _would_ want the three-dash between
the message and the diff material, but that logic belongs to the
caller, not diff generator.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This basically does a few things that are sadly somewhat interdependent,
and nontrivial to split out
- get rid of "struct log_tree_opt"
The fields in "log_tree_opt" are moved into "struct rev_info", and all
users of log_tree_opt are changed to use the rev_info struct instead.
- add the parsing for the log_tree_opt arguments to "setup_revision()"
- make setup_revision set a flag (revs->diff) if the diff-related
arguments were used. This allows "git log" to decide whether it wants
to show diffs or not.
- make setup_revision() also initialize the diffopt part of rev_info
(which we had from before, but we just didn't initialize it)
- make setup_revision() do all the "finishing touches" on it all (it will
do the proper flag combination logic, and call "diff_setup_done()")
Now, that was the easy and straightforward part.
The slightly more involved part is that some of the programs that want to
use the new-and-improved rev_info parsing don't actually want _commits_,
they may want tree'ish arguments instead. That meant that I had to change
setup_revision() to parse the arguments not into the "revs->commits" list,
but into the "revs->pending_objects" list.
Then, when we do "prepare_revision_walk()", we walk that list, and create
the sorted commit list from there.
This actually cleaned some stuff up, but it's the less obvious part of the
patch, and re-organized the "revision.c" logic somewhat. It actually paves
the way for splitting argument parsing _entirely_ out of "revision.c",
since now the argument parsing really is totally independent of the commit
walking: that didn't use to be true, since there was lots of overlap with
get_commit_reference() handling etc, now the _only_ overlap is the shared
(and trivial) "add_pending_object()" thing.
However, I didn't do that file split, just because I wanted the diff
itself to be smaller, and show the actual changes more clearly. If this
gets accepted, I'll do further cleanups then - that includes the file
split, but also using the new infrastructure to do a nicer "git diff" etc.
Even in this form, it actually ends up removing more lines than it adds.
It's nice to note how simple and straightforward this makes the built-in
"git log" command, even though it continues to support all the diff flags
too. It doesn't get much simpler that this.
I think this is worth merging soonish, because it does allow for future
cleanup and even more sharing of code. However, it obviously touches
"revision.c", which is subtle. I've tested that it passes all the tests we
have, and it passes my "looks sane" detector, but somebody else should
also give it a good look-over.
[jc: squashed the original and three "oops this too" updates, with
another fix-up.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This trivially avoids keeping the commit message data around after we
don't need it any more, avoiding a continually growing "git log" memory
footprint.
It's not a huge deal, but it's somewhat noticeable. For the current kernel
tree, doing a full "git log" I got
- before: /usr/bin/time git log > /dev/null
0.81user 0.02system 0:00.84elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+8851minor)pagefaults 0swaps
- after: /usr/bin/time git log > /dev/null
0.79user 0.03system 0:00.83elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+5039minor)pagefaults 0swaps
ie the touched pages dropped from 8851 to 5039. For the historic kernel
archive, the numbers are 18357->11037 minor page faults.
We could/should in theory free the commits themselves, but that's really a
lot harder, since during revision traversal we may hit the same commit
twice through different children having it as a parent, even after we've
shown it once (when that happens, we'll silently ignore it next time, but
we still need the "struct commit" to know).
And as the commit message data is clearly the biggest part of the commit,
this is the really easy 60% solution.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes things that include revision.h build again.
Blame is also built, but I am not sure how well it works (or how
well it worked to begin with) -- it was relying on tree-diff to
be using whatever pathspec was used the last time, which smells
a bit suspicious.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this flag, "git log -p paths..." shows commits that
touch the specified paths, and diffs about the same specified
paths. With this, the full diff is shown for commits that touch
the specified paths.
Signed-off-by: Junio C Hamano <junkio@cox.net>
And this makes "git log" to take common diff-tree options, so
that it can be used as "git whatchanged".
The recent revision walker updates by Linus to make path
limiting low-latency helps this quite a bit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not only do we do it in both rev-list.c and git.c, the revision walking
code will soon want to know whether we should rewrite parenthood
information or not.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark Wooding noticed there was a type mismatch warning in git.c; this
patch does things slightly differently (mostly tightening const) and
was what I was holding onto, waiting for the setup-revisions change
to be merged into the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the handling of max-count shorthand from the internal
implementation of "git log" to setup_revisions() so other users
of setup_revisions() can use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This ports the following options from rev-list based git-log
implementation:
* -<n>, -n<n>, and -n <n>. I am still wondering if we want
this natively supported by setup_revisions(), which already
takes --max-count. We may want to move them in the next
round. Also I am not sure if we can get away with not
setting revs->limited when we set max-count. The latest
rev-list.c and revision.c in this series do not, so I left
them as they are.
* --pretty and --pretty=<fmt>.
* --abbrev=<n> and --no-abbrev.
The previous commit already handles time-based limiters
(--since, --until and friends). The remaining things that
rev-list based git-log happens to do are not useful in a pure
log-viewing purposes, and not ported:
* --bisect (obviously).
* --header. I am actually in favor of doing the NUL
terminated record format, but rev-list based one always
passed --pretty, which defeated this option. Maybe next
round.
* --parents. I do not think of a reason a log viewer wants
this. The flag is primarily for feeding squashed history
via pipe to downstream tools.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is what the previous diffs all built up to.
We can do "git log" as a trivial small helper function inside git.c,
because the infrastructure is all there for us to use as a library.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is another patch in the "prepare to do more in C" series, where the
git wrapper command is taught about the notion of handling some
functionality internally.
Right now, the only internal commands are "version" and "help", but the
point being that we can now easily extend it to handle some of the trivial
scripts internally. Things like "git log" and "git diff" wouldn't need
separate external scripts any more.
This also implies that to support the old "git-log" and "git-diff" syntax,
the "git" wrapper now automatically looks at the name it was executed as,
and if it is "git-xxxx", it will assume that it is to internally do what
"git xxxx" would do.
In other words, you can (once you implement an internal command) soft- or
hard-link that command to the "git" wrapper command, and it will do the
right thing, whether you use the "git xxxx" or the "git-xxxx" format.
There's one other change: the search order for external programs is
modified slightly, so that the first entry remains GIT_EXEC_DIR, but the
second entry is the same directory as the git wrapper itself was executed
out of - if we can figure it out from argv[0], of course.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git suite may not be in PATH (and thus programs such as
git-send-pack could not exec git-rev-list). Thus there is a need for
logic that will locate these programs. Modifying PATH is not
desirable as it result in behavior differing from the user's
intentions, as we may end up prepending "/usr/bin" to PATH.
- git C programs will use exec*_git_cmd() APIs to exec sub-commands.
- exec*_git_cmd() will execute a git program by searching for it in
the following directories:
1. --exec-path (as used by "git")
2. The GIT_EXEC_PATH environment variable.
3. $(gitexecdir) as set in Makefile (default value $(bindir)).
- git wrapper will modify PATH as before to enable shell scripts to
invoke "git-foo" commands.
Ideally, shell scripts should use the git wrapper to become independent
of PATH, and then modifying PATH will not be necessary.
[jc: with minor updates after a brief review.]
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most other scm's understand it, most users expect it and it's an easy fix.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fprintf and die sometimes have missing/excessive "\n" in their arguments,
correct the strings where I think it would be appropriate.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes "pretty_print_string_list()" to show the git commands
alphabetically in column order, which is the normal one.
Ie instead of doing
git commands available in '/home/torvalds/bin'
----------------------------------------------
add am ...
applypatch archimport ...
cat-file check-ref-format ...
...
it does
git commands available in '/home/torvalds/bin'
----------------------------------------------
add diff-tree ...
am fetch ...
apply fetch-pack ...
...
where each column is sorted.
This is how "ls" sorts things too, and since visually the columns are much
more distinct than the rows, so it _looks_ more sorted.
The "ls" command has a "-x" option that lists entries by lines (the way
git.c used to): if somebody wants to do that, the new print-out logic
could be easily accomodated to that too. Matter of taste and preference, I
guess.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the git "show commands" function will react to the environment
variable COLUMNS, or just default to a width of 80 characters.
That's just soo eighties. Nobody sane sets COLUMNS any more, unless they
need to support some stone-age software from before the age of steam
engines, SIGWINCH and TIOCGWINSZ.
So get with the new century, and use TIOCGWINSZ to get the terminal size.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This attempts to clean up the way various compatibility
functions are defined and used.
- A new header file, git-compat-util.h, is introduced. This
looks at various NO_XXX and does necessary function name
replacements, equivalent of -Dstrcasestr=gitstrcasestr in the
Makefile.
- Those function name replacements are removed from the Makefile.
- Common features such as usage(), die(), xmalloc() are moved
from cache.h to git-compat-util.h; cache.h includes
git-compat-util.h itself.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the given command name was too long, we exited with a
message with the number of bytes of the final command name
inside parentheses, without saying what that number is. It was
only meant as a debugging aid while development, so remove it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitsetenv as implemented in compat/setenv.c takes two const char*
and int; match that.
Also fix an incorrect attempt in prepend_to_path() to
NUL-terminate the string which stuffed the NUL character at one
past the end of allocation, and was not needed to begin with (we
copy the old_path string including the NUL which terminates it).
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is no setenv() in Solaris 5.8. The trivial calls to
setenv() were replaced by putenv() in a much earlier patch,
but setenv() was used again in git.c. This patch just adds
a compat/setenv.c.
The rule for building git$(X) also needs to include compat.
objects and compiler flags. Those are now in makefile vars
COMPAT_OBJS and COMPAT_CFLAGS.
Signed-off-by: E. Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Use stderr for error output
- Build git_command more careful
- ENOENT is good enough for check of failed exec to show usage, no
access() check needed
[jc: Originally from Alex Riesen with inputs from Sven
Verdoolaege mixed in.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix a warning:
git.c:276: warning: value computed is not used
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Truncate the result from readdir() in the exec-path if they end
with .exe, to make it a bit more readable on Cygwin.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Updates to fix the nits found during the list discussion.
- Lose PATH_TO_MAN; just rely on execlp() to find whereever the
"man" command is installed.
- Do not randomly chdir(), but concatenate to the current
working directory only if the given path is not absolute.
- Lose use of glob(); read from exec_path and do sorting
ourselves -- it is not that much more work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's by design a bit stupid (matching ^git rather than ^git-), so as
to work with 'gitk' and 'git' as well.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch provides a C implementation of the 'git' program and
introduces support for putting the git-* commands in a directory
of their own. It also saves some time on executing those commands
in a tight loop and it prints the currently available git commands
in a nicely formatted list.
The location of the GIT_EXEC_PATH (name discussion's closed, thank gods)
can be obtained by running
git --exec-path
which will hopefully give porcelainistas ample time to adapt their
heavy-duty loops to call the core programs directly and thus save
the extra fork() / execve() overhead, although that's not really
necessary any more.
The --exec-path value is prepended to $PATH, so the git-* programs
should Just Work without ever requiring any changes to how they call
other programs in the suite.
Some timing values for 10000 invocations of git-var >&/dev/null:
git.sh: 24.194s
git.c: 9.044s
git-var: 7.377s
The git-<tab><tab> behaviour can, along with the someday-to-be-deprecated
git-<command> form of invocation, be indefinitely retained by adding
the following line to one's .bash_profile or equivalent:
PATH=$PATH:$(git --exec-path)
Experimental libraries can be used by either setting the environment variable
GIT_EXEC_PATH, or by using
git --exec-path=/some/experimental/exec-path
Relative paths are properly grok'ed as exec-path values.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
