The fsmonitor interface got out of sync after the in-core index
file gets discarded, which has been corrected.
* js/fsmonitor-refresh-after-discarding-index:
fsmonitor: force a refresh after the index was discarded
fsmonitor: demonstrate that it is not refreshed after discard_index()
Attempt to use an abbreviated option in "git clone --recurs" is
responded by a request to disambiguate between --recursive and
--recurse-submodules, which is bad because these two are synonyms.
The parse-options API has been extended to define such synonyms
more easily and not produce an unnecessary failure.
* nd/parse-options-aliases:
parse-options: don't emit "ambiguous option" for aliases
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
This one is tricky.
When `core.fsmonitor` is set, a `refresh_index()` will not perform a
full scan of files that might be modified, but will query the fsmonitor
and refresh only the ones that have been actually touched.
Due to implementation details, the fsmonitor is queried in
`refresh_cache_ent()`, but of course it only has to be queried once, so
we set a flag when we did that. But when the index was discarded, we did
not re-set that flag.
So far, this is only covered by our test suite when running with
GIT_TEST_FSMONITOR=$PWD/t7519/fsmonitor-all, and only due to the way the
built-in stash interacts with the recursive merge machinery.
Let's introduce a straight-forward regression test for this.
We simply extend the "read & discard index" loop in `test-tool
read-cache` to optionally refresh the index, report on a given file's
status, and then modify that file. Due to the bug described above, only
the first refresh will actually query the fsmonitor; subsequent loop
iterations will not.
This problem was reported by Ævar Arnfjörð Bjarmason.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing machinery so that e.g. "clone --recurs ..."
doesn't error out because "clone" understands both "--recursive" and
"--recurse-submodules" to mean the same thing.
Initially "clone" just understood --recursive until the
--recurses-submodules alias was added in ccdd3da652 ("clone: Add the
--recurse-submodules option as alias for --recursive",
2010-11-04). Since bb62e0a99f ("clone: teach --recurse-submodules to
optionally take a pathspec", 2017-03-17) the longer form has been
promoted to the default.
But due to the way the options parsing machinery works this resulted
in the rather absurd situation of:
$ git clone --recurs [...]
error: ambiguous option: recurs (could be --recursive or --recurse-submodules)
Add OPT_ALIAS() to express this link between two or more options and use
it in git-clone. Multiple aliases of an option could be written as
OPT_ALIAS(0, "alias1", "original-name"),
OPT_ALIAS(0, "alias2", "original-name"),
...
The current implementation is not exactly optimal in this case. But we
can optimize it when it becomes a problem. So far we don't even have two
aliases of any option.
A big chunk of code is actually from Junio C Hamano.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code is updated to check the result of memory allocation before
it is used in more places, by using xmalloc and/or xcalloc calls.
* jk/xmalloc:
progress: use xmalloc/xcalloc
xdiff: use xmalloc/xrealloc
xdiff: use git-compat-util
test-prio-queue: use xmalloc
"git difftool" can now run outside a repository.
* js/difftool-no-index:
difftool: allow running outside Git worktrees with --no-index
parse-options: make OPT_ARGUMENT() more useful
difftool: remove obsolete (and misleading) comment
The `git serve` built-in was introduced in ed10cb952d (serve:
introduce git-serve, 2018-03-15) as a backend to serve Git protocol v2,
probably originally intended to be spawned by `git upload-pack`.
However, in the version that the protocol v2 patches made it into core
Git, `git upload-pack` calls the `serve()` function directly instead of
spawning `git serve`; The only reason in life for `git serve` to survive
as a built-in command is to provide a way to test the protocol v2
functionality.
Meaning that it does not even have to be a built-in that is installed
with end-user facing Git installations, but it can be a test helper
instead.
Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for moving `git serve` into `test-tool` (because it
really is only used by the test suite), we teach the `test-tool` the
useful trick to change the working directory before running the test
command, which will avoid introducing subshells in the test code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-prio-queue.c doesn't check the return value of malloc, and could
segfault.
It's unlikely for this to matter in practice; it's a small allocation,
and this code isn't even installed alongside the rest of Git. But let's
use xmalloc(), which makes auditing for other accidental uses of bare
malloc() easier.
Reported-by: 王健强 <jianqiang.wang@securitygossip.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only need the current time for relative dates like "5
minutes ago", and those are parsed only through approxidate,
not the strict parser used by parse_dates().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`OPT_ARGUMENT()` is intended to keep the specified long option in `argv`
and not to do anything else.
However, it would make a lot of sense for the caller to know whether
this option was seen at all or not. For example, we want to teach `git
difftool` to work outside of any Git worktree, but only when
`--no-index` was specified.
Note: nothing in Git uses OPT_ARGUMENT(). Even worse, looking through
the commit history, one can easily see that nothing even
ever used it, apart from the regression test.
So not only do we make `OPT_ARGUMENT()` more useful, we are also about
to introduce its first real user!
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cc95bc2025 (t5562: replace /dev/zero with a pipe from
generate_zero_bytes, 2019-02-09), we replaced usage of /dev/zero (which
is not available on NonStop, apparently) by a Perl script snippet to
generate NUL bytes.
Sadly, it does not seem to work on NonStop, as t5562 reportedly hangs.
Worse, this also hangs in the Ubuntu 16.04 agents of the CI builds on
Azure Pipelines: for some reason, the Perl script snippet that is run
via `generate_zero_bytes` in t5562's 'CONTENT_LENGTH overflow ssite_t'
test case tries to write out an infinite amount of NUL bytes unless a
broken pipe is encountered, that snippet never encounters the broken
pipe, and keeps going until the build times out.
Oddly enough, this does not reproduce on the Windows and macOS agents,
nor in a local Ubuntu 18.04.
This developer tried for a day to figure out the exact circumstances
under which this hang happens, to no avail, the details remain a
mystery.
In the end, though, what counts is that this here change incidentally
fixes that hang (maybe also on NonStop?). Even more positively, it gets
rid of yet another unnecessary Perl invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
A new date format "--date=human" that morphs its output depending
on how far the time is from the current time has been introduced.
"--date=auto" can be used to use this new format when the output is
going to the pager or to the terminal and otherwise the default
format.
* lt/date-human:
Add `human` date format tests.
Add `human` format to test-tool
Add 'human' date format documentation
Replace the proposed 'auto' mode with 'auto:'
Add 'human' date format
Code cleanup.
* jk/unused-parameter-cleanup:
convert: drop path parameter from actual conversion functions
convert: drop len parameter from conversion checks
config: drop unused parameter from maybe_remove_section()
show_date_relative(): drop unused "tz" parameter
column: drop unused "opts" parameter in item_length()
create_bundle(): drop unused "header" parameter
apply: drop unused "def" parameter from find_name_gnu()
match-trees: drop unused path parameter from score functions
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
The getnanos() helper always gets the current time from our
getnanotime() facility. The caller cannot override it via TEST_DATE_NOW,
and hence we simply ignore the "now" parameter to the function. Let's
remove it, as it may mislead callers into thinking it does something.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
Add sha-256 hash and plug it through the code to allow building Git
with the "NewHash".
* bc/sha-256:
hash: add an SHA-256 implementation using OpenSSL
sha256: add an SHA-256 implementation using libgcrypt
Add a base implementation of SHA-256 support
commit-graph: convert to using the_hash_algo
t/helper: add a test helper to compute hash speed
sha1-file: add a constant for hash block size
t: make the sha1 test-tool helper generic
t: add basic tests for our SHA-1 implementation
cache: make hashcmp and hasheq work with larger hashes
hex: introduce functions to print arbitrary hashes
sha1-file: provide functions to look up hash algorithms
sha1-file: rename algorithm to "sha1"
"git fetch --recurse-submodules" may not fetch the necessary commit
that is bound to the superproject, which is getting corrected.
* sb/submodule-recursive-fetch-gets-the-tip:
fetch: ensure submodule objects fetched
submodule.c: fetch in submodules git directory instead of in worktree
submodule: migrate get_next_submodule to use repository structs
repository: repo_submodule_init to take a submodule struct
submodule: store OIDs in changed_submodule_names
submodule.c: tighten scope of changed_submodule_names struct
submodule.c: sort changed_submodule_names before searching it
submodule.c: fix indentation
sha1-array: provide oid_array_filter
Add the human format support to the test tool so that
GIT_TEST_DATE_NOW can be used to specify the current time.
The get_time() helper function was created and and checks the
GIT_TEST_DATE_NOW environment variable. If GIT_TEST_DATE_NOW is set,
then that date is used instead of the date returned by by
gettimeofday().
All calls to gettimeofday() were replaced by calls to get_time().
Renamed occurances of TEST_DATE_NOW to GIT_TEST_DATE_NOW since the
variable is now used in the get binary and not just in the test-tool.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that Git's test suite is implemented in Unix shell script that
is as portable as we can muster, combined with the fact that Unix shell
scripting is foreign to Windows (and therefore has to be emulated),
results in pretty abysmal speed of the test suite on that platform, for
pretty much no other reason than that language choice.
For comparison: while the Linux build & test is typically done within
about 8 minutes, the Windows build & test typically lasts about 80
minutes in Azure Pipelines.
To help with that, let's use the Azure Pipeline feature where you can
parallelize jobs, make jobs depend on each other, and pass artifacts
between them.
The tests are distributed using the following heuristic: listing all
test scripts ordered by size in descending order (as a cheap way to
estimate the overall run time), every Nth script is run (where N is the
total number of parallel jobs), starting at the index corresponding to
the parallel job. This slicing is performed by a new function that is
added to the `test-tool`.
To optimize the overall runtime of the entire Pipeline, we need to move
the Windows jobs to the beginning (otherwise there would be a very
decent chance for the Pipeline to be run only the Windows build, while
all the parallel Windows test jobs wait for this single one).
We use Azure Pipelines Artifacts for both the minimal Git for Windows
SDK as well as the built executables, as deduplication and caching close
to the agents makes that really fast. For comparison: while downloading
and unpacking the minimal Git for Windows SDK via PowerShell takes only
one minute (down from anywhere between 2.5 to 7 when using a shallow
clone), uploading it as Pipeline Artifact takes less than 30s and
downloading and unpacking less than 20s (sometimes even as little as
only twelve seconds).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The JUnit XML format lends itself to be presented in a powerful UI,
where you can drill down to the information you are interested in very
quickly.
For test failures, this usually means that you want to see the detailed
trace of the failing tests.
With Travis CI, we passed the `--verbose-log` option to get those
traces. However, that seems excessive, as we do not need/use the logs in
almost all of those cases: only when a test fails do we have a way to
include the trace.
So let's do something different when using Azure DevOps: let's run all
the tests with `--quiet` first, and only if a failure is encountered,
try to trace the commands as they are executed.
Of course, we cannot turn on `--verbose-log` after the fact. So let's
just re-run the test with all the same options, adding `--verbose-log`.
And then munging the output file into the JUnit XML on the fly.
Note: there is an off chance that re-running the test in verbose mode
"fixes" the failures (and this does happen from time to time!). That is
a possibility we should be able to live with. Ideally, we would label
this as "Passed upon rerun", and Azure Pipelines even know about that
outcome, but it is not available when using the JUnit XML format for
now:
https://github.com/Microsoft/azure-pipelines-agent/blob/master/src/Agent.Worker/TestResults/JunitResultReader.cs
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a bit ridiculous to spin up a full-blown Perl instance (especially
on Windows, where that means spinning up a full POSIX emulation layer,
AKA the MSYS2 runtime) just to tell how large a given file is.
So let's just use the test-tool to do that job instead.
This command will also be used over the next commits, to allow for
cutting out individual test cases' verbose log from the file generated
via --verbose-log.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will come in handy when publishing the results of Git's test suite
during an automated Azure DevOps run.
Note: we need to make extra sure that invalid UTF-8 encoding is turned
into valid UTF-8 (using the Replacement Character, \uFFFD) because
t9902's trace contains such invalid byte sequences, and the task in the
Azure Pipeline that uploads the test results would refuse to do anything
if it was asked to parse an .xml file with invalid UTF-8 in it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit, we want to teach Git's test suite to optionally
output test results in JUnit-style .xml files. These files contain
information about the time spent. So we need a way to measure time.
While we could use `date +%s` for that, this will give us only seconds,
i.e. very coarse-grained timings.
GNU `date` supports `date +%s.%N` (i.e. nanosecond-precision output),
but there is no equivalent in BSD `date` (read: on macOS, we would not
be able to obtain precise timings).
So let's introduce `test-tool date getnanos`, with an optional start
time, that outputs preciser values. Note that this might not actually
give us nanosecond precision on some platforms, but it will give us as
precise information as possible, without the portability issues of shell
commands.
Granted, it is a bit pointless to try measuring times accurately in
shell scripts, certainly to nanosecond precision. But it is better than
second-granularity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The timestamp we receive is in epoch time, so there's no need for a
timezone parameter to interpret it. The matching show_date() uses "tz"
to show dates in author local time, but relative dates show only the
absolute time difference. The author's location is irrelevant, barring
relativistic effects from using Git close to the speed of light.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like it is a copy-paste error made in 80f2a6097c
(t/helper: add test-ref-store to test ref-store functions,
2017-03-26) to pass "old-sha1" instead of "new-sha1" to
notnull() when we get the new sha1 argument from
const char **argv.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dade47c06c (commit-graph: add repo arg to graph readers, 2018-07-11)
brought more independence from the_repository to the commit graph, however
it was not completely independent of the_repository, as the previous
patches show.
To ensure we're not accessing the_repository by accident, we'd ideally
assign NULL to the_repository to trigger a segfault on access.
We currently have a temporary hack in cache.h, which relies on
the_hash_algo (which is a short form of the_repository->hash_algo) to
be set, so we cannot do that. The next best thing is to set all fields of
the_repository to 0, so any accidental access is more likely to be found.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When constructing a struct repository for a submodule for some revision
of the superproject where the submodule is not contained in the index,
it may not be present in the working tree currently either. In that
situation giving a 'path' argument is not useful. Upgrade the
repo_submodule_init function to take a struct submodule instead.
The submodule struct can be obtained via submodule_from_{path, name} or
an artificial submodule struct can be passed in.
While we are at it, rename the repository struct in the repo_submodule_init
function, which is to be initialized, to a name that is not confused with
the struct submodule as easily. Perform such renames in similar functions
as well.
Also move its documentation into the header file.
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various functions have been audited for "-Wunused-parameter" warnings
and bugs in them got fixed.
* jk/unused-parameter-fixes:
midx: double-check large object write loop
assert NOARG/NONEG behavior of parse-options callbacks
parse-options: drop OPT_DATE()
apply: return -1 from option callback instead of calling exit(1)
cat-file: report an error on multiple --batch options
tag: mark "--message" option with NONEG
show-branch: mark --reflog option as NONEG
format-patch: mark "--no-numbered" option with NONEG
status: mark --find-renames option with NONEG
cat-file: mark batch options with NONEG
pack-objects: mark index-version option as NONEG
ls-files: mark exclude options as NONEG
am: handle --no-patch-format option
apply: mark include/exclude options as NONEG
The revision walker machinery learned to take advantage of the
commit generation numbers stored in the commit-graph file.
* ds/reachable-topo-order:
t6012: make rev-list tests more interesting
revision.c: generation-based topo-order algorithm
commit/revisions: bookkeeping before refactoring
revision.c: begin refactoring --topo-order logic
test-reach: add rev-list tests
test-reach: add run_three_modes method
prio-queue: add 'peek' operation
SHA-1 is weak and we need to transition to a new hash function. For
some time, we have referred to this new function as NewHash. Recently,
we decided to pick SHA-256 as NewHash. The reasons behind the choice of
SHA-256 are outlined in the thread starting at [1] and in the commit
history for the hash function transition document.
Add a basic implementation of SHA-256 based off libtomcrypt, which is in
the public domain. Optimize it and restructure it to meet our coding
standards. Pull in the update and final functions from the SHA-1 block
implementation, as we know these function correctly with all compilers.
This implementation is slower than SHA-1, but more performant
implementations will be introduced in future commits.
Wire up SHA-256 in the list of hash algorithms, and add a test that the
algorithm works correctly.
Note that with this patch, it is still not possible to switch to using
SHA-256 in Git. Additional patches are needed to prepare the code to
handle a larger hash algorithm and further test fixes are needed.
[1] https://public-inbox.org/git/20180609224913.GC38834@genre.crustytoothpaste.net/
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a utility (which is less for the testsuite and more for developers)
that can compute hash speeds for whatever hash algorithms are
implemented. This allows developers to test their personal systems to
determine the performance characteristics of various algorithms.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're going to have multiple hash algorithms to test, it makes
sense to share as much of the test code as possible. Convert the sha1
helper for the test-tool to be generic and move it out into its own
module. This will allow us to share most of this code with our NewHash
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The history traversal used to implement the tag-following has been
optimized by introducing a new helper.
* ds/add-missing-tags:
remote: make add_missing_tags() linear
test-reach: test get_reachable_subset
commit-reach: implement get_reachable_subset
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no users of OPT_DATE except for test-parse-options; its
only caller went away in 27ec394a97 (prune: introduce OPT_EXPIRY_DATE()
and use it, 2013-04-25).
It also has a bug: it does not specify PARSE_OPT_NONEG, but its callback
does not respect the "unset" flag, and will feed NULL to approxidate()
and segfault. Probably this should be marked with NONEG, or the callback
should set the timestamp to some sentinel value (e.g,. "0", or
"(time_t)-1").
But since there are no callers, deleting it means we don't even have to
think about what the right behavior should be.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_reachable_subset() method returns the list of commits in
the 'to' array that are reachable from at least one commit in the
'from' array. Add tests that check this method works in a few
cases:
1. All commits in the 'to' list are reachable. This exercises the
early-termination condition.
2. Some commits in the 'to' list are reachable. This exercises the
loop-termination condition.
3. No commits in the 'to' list are reachable. This exercises the
NULL return condition.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When consuming a priority queue, it can be convenient to inspect
the next object that will be dequeued without actually dequeueing
it. Our existing library did not have such a 'peek' operation, so
add it as prio_queue_peek().
Add a reference-level comparison in t/helper/test-prio-queue.c
so this method is exercised by t0009-prio-queue.sh. Further, add
a test that checks the behavior when the compare function is NULL
(i.e. the queue becomes a stack).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test tool to exercise config_from_gitmodules(), in particular for
the case of nested submodules.
Add also a test to document that reading the submoudles config of nested
submodules does not work yet when the .gitmodules file is not in the
working tree but it still in the index.
This is because the git API does not always make it possible access the
object store of an arbitrary repository (see get_oid() usage in
config_from_gitmodules()).
When this git limitation gets fixed the aforementioned use case will be
supported too.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
