Previously "git diff-tree --pretty COMMIT" was run using
"run_command_v_opt" to display information about the first bad
commit.
The goal of this patch is to avoid a "fork" and an "exec" call
when displaying that information.
To do that, we manually setup revision information as
"git diff-tree --pretty" would do it, and then use the
"log_tree_commit" function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of this patch series is to check if good revisions are
ancestor of the bad revision without forking a process to launch
"git rev-list $good ^$bad".
This new version of this patch series does not use an "unparse_commit"
function anymore, we use "clear_commit_marks" instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We must save the pending commits that will be used during revision
walking and unparse them after, because we want to leave a clean
state for the next revision walking that will try to find the best
bisection point.
As we don't fork a process anymore to call "git rev-list", we need
to remove the use of GIT_TRACE to check how "git rev-list" is
called from the t6030 test that uses it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patches changes the "bisect_rev_setup" and "bisect_common"
functions to make it easier to reuse them in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch replace the "--next-exit" option of "git bisect--helper"
with a "--next-all" option that does merge base checking using
the "check_good_are_ancestors_of_bad" function implemented in
"bisect.c" in a former patch.
The new "--next-all" option is then used in "git-bisect.sh" instead
of the "--next-exit" option, and all the shell functions in
"git-bisect.sh" that are now unused are removed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a port of the function with the same name that is in
"git-bisect.sh". The new function is not used yet but will be in
a later patch.
We also implement an helper "check_ancestors" function that use
"start_command" and "finish_command" to launch
"git rev-list $good ^$bad".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And all functions needed to make it work.
This is a port from the shell function with the same name
"git-bisect.sh". This function is not used yet but it will be used
later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sha1_array easier to use, so later patches will be simpler.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So they can be used on the good array too.
This is done by renaming many functions and some variables to
remove "skip" in the name, and by adding a
"struct sha1_array *array" argument where needed.
While at it, make the second argument to "lookup_sha1_array"
const. It becomes "const unsigned char *sha1".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves some function calls into "bisect_next_exit" so
that functions are nesting less.
The call to "bisect_rev_setup" is moved from "bisect_common" into
"bisect_next_exit" and the call to "read_bisect_refs" from
"bisect_rev_setup" into "bisect_next_exit".
While at it, "rev_argv" is moved into "bisect_rev_setup".
This will make it easier and cleaner to implement checking merge
bases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because we will use other instances of this struct.
The "rev_argv_push" function is changed into 2 functions
"argv_array_push" and "argv_array_push_sha1" that take a "struct
argv_array *" as first argument. And these functions are used to
simplify "bisect_rev_setup".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to use good revisions for checking merge
bases later.
To simplify the code, a new "sha1_array_push" function is also
introduced.
And while at it we move the earlier part of the code to fill the
argv that is passed to "setup_revisions", so that all this code is
now completely after "read_bisect_refs".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is a minor clean up right now, but the new function
will evolve and be used more later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch creates a "struct sha1_array" to store skipped revisions,
so that the same struct can be reused in a later patch for good
revisions.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it has been replaced by "--next-exit".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of this patch is to port more shell code from the "bisect_next"
function in "git-bisect.sh" to C code in "builtin-bisect--helper.c".
So we port the code that interprets the bisection result and stops or
continues (by checking out the next revision) the bisection process.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So we can easily reuse the code in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a cleanup patch to make it easier to use the
"show_bisect_vars" function and take advantage of the rev_list_info
struct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes the last static variables that were used in
the "show_commit" function.
To do that, we create a new "rev_list_info" struct that we will pass
in the "void *data" argument to "show_commit".
This means that we have to change the first argument to
"show_bisect_vars" too.
While at it, we also remove a "struct commit_list *list" variable
in "cmd_rev_list" that is not really needed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing:
eval "git bisect--helper --next-vars" | {
while read line
do
echo "$line &&"
done
echo ':'
}
the result code comes from the last "echo ':'", not from running
"git bisect--helper --next-vars".
This patch gets rid of the need to string together the line from
the output of "git bisect--helper" with "&&" in the calling script
by making "git bisect--helper --next-vars" return output variables
already in that format.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "int show_all, int show_tried" we now only pass "int flags",
because we will add one more flag in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed because "git bisect--helper" must read bisect paths
in "$GIT_DIR/BISECT_NAMES", so that a bisection can be performed only
on commits that touches paths in this file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
instead of the specific one that was simpler but less efficient.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "filter_skip" function in C in
"bisect.c" that will later replace the existing implementation in
shell in "git-bisect.sh".
An array is used to store the skipped commits. But the array is
not yet fed anything.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch creates new "bisect.c" and "bisect.h" files and move
bisect related code into these files.
While at it, we also remove some include directives that are not
needed any more from the beginning of "builtin-rev-list.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
