treewide: correct several "up-to-date" to "up to date"

Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).

This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.

Fix a typo in Documentation/git-diff-index.txt while we're there.

Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Documentation/git-apply.txt

@@ -66,7 +66,7 @@ OPTIONS
 	disables it is in effect), make sure the patch is
 	applicable to what the current index file records.  If
 	the file to be patched in the working tree is not
-	up-to-date, it is flagged as an error.  This flag also
+	up to date, it is flagged as an error.  This flag also
 	causes the index file to be updated.
 
 --cached::
@@ -259,7 +259,7 @@ treats these changes as follows.
 If `--index` is specified (explicitly or implicitly), then the submodule
 commits must match the index exactly for the patch to apply.  If any
 of the submodules are checked-out, then these check-outs are completely
-ignored, i.e., they are not required to be up-to-date or clean and they
+ignored, i.e., they are not required to be up to date or clean and they
 are not updated.
 
 If `--index` is not specified, then the submodule commits in the patch

Documentation/git-cvsserver.txt

@@ -223,7 +223,7 @@ access method and requested operation.
 That means that even if you offer only read access (e.g. by using
 the pserver method), 'git-cvsserver' should have write access to
 the database to work reliably (otherwise you need to make sure
-that the database is up-to-date any time 'git-cvsserver' is executed).
+that the database is up to date any time 'git-cvsserver' is executed).
 
 By default it uses SQLite databases in the Git directory, named
 `gitcvs.<module_name>.sqlite`. Note that the SQLite backend creates

Documentation/git-diff-index.txt

@@ -85,7 +85,7 @@ a 'git write-tree' + 'git diff-tree'. Thus that's the default mode.
 The non-cached version asks the question:
 
   show me the differences between HEAD and the currently checked out
-  tree - index contents _and_ files that aren't up-to-date
+  tree - index contents _and_ files that aren't up to date
 
 which is obviously a very useful question too, since that tells you what
 you *could* commit. Again, the output matches the 'git diff-tree -r'
@@ -100,8 +100,8 @@ have not actually done a 'git update-index' on it yet - there is no
   torvalds@ppc970:~/v2.6/linux> git diff-index --abbrev HEAD
   :100644 100664 7476bb... 000000...      kernel/sched.c
 
-i.e., it shows that the tree has changed, and that `kernel/sched.c` has is
-not up-to-date and may contain new stuff. The all-zero sha1 means that to
+i.e., it shows that the tree has changed, and that `kernel/sched.c` is
+not up to date and may contain new stuff. The all-zero sha1 means that to
 get the real diff, you need to look at the object in the working directory
 directly rather than do an object-to-object diff.
 

Documentation/git-merge.txt

@@ -133,7 +133,7 @@ exception is when the changed index entries are in the state that
 would result from the merge already.)
 
 If all named commits are already ancestors of `HEAD`, 'git merge'
-will exit early with the message "Already up-to-date."
+will exit early with the message "Already up to date."
 
 FAST-FORWARD MERGE
 ------------------

Documentation/git-rebase.txt

@@ -334,7 +334,7 @@ which makes little sense.
 
 -f::
 --force-rebase::
-	Force a rebase even if the current branch is up-to-date and
+	Force a rebase even if the current branch is up to date and
 	the command without `--force` would return without doing anything.
 +
 You may find this (or --no-ff with an interactive rebase) helpful after

Documentation/git-rerere.txt

@@ -205,7 +205,7 @@ development on the topic branch:
 ------------
 
 you could run `git rebase master topic`, to bring yourself
-up-to-date before your topic is ready to be sent upstream.
+up to date before your topic is ready to be sent upstream.
 This would result in falling back to a three-way merge, and it
 would conflict the same way as the test merge you resolved earlier.
 'git rerere' will be run by 'git rebase' to help you resolve this

Documentation/git-rm.txt

@@ -146,7 +146,7 @@ the submodule's history. If it exists the submodule.<name> section
 in the linkgit:gitmodules[5] file will also be removed and that file
 will be staged (unless --cached or -n are used).
 
-A submodule is considered up-to-date when the HEAD is the same as
+A submodule is considered up to date when the HEAD is the same as
 recorded in the index, no tracked files are modified and no untracked
 files that aren't ignored are present in the submodules work tree.
 Ignored files are deemed expendable and won't stop a submodule's work

Documentation/git-svn.txt

@@ -424,7 +424,7 @@ Any other arguments are passed directly to 'git log'
 'set-tree'::
 	You should consider using 'dcommit' instead of this command.
 	Commit specified commit or tree objects to SVN.  This relies on
-	your imported fetch data being up-to-date.  This makes
+	your imported fetch data being up to date.  This makes
 	absolutely no attempts to do patching when committing to SVN, it
 	simply overwrites files with those specified in the tree or
 	commit.  All merging is assumed to have taken place

Documentation/git-update-index.txt

@@ -214,7 +214,7 @@ will remove the intended effect of the option.
 Using --refresh
 ---------------
 `--refresh` does not calculate a new sha1 file or bring the index
-up-to-date for mode/content changes. But what it *does* do is to
+up to date for mode/content changes. But what it *does* do is to
 "re-match" the stat information of a file with the index, so that you
 can refresh the index for a file that hasn't been changed but where
 the stat entry is out of date.

Documentation/gitcore-tutorial.txt

@@ -631,7 +631,7 @@ So after you do a `cp -a` to create a new copy, you'll want to do
 $ git update-index --refresh
 ----------------
 +
-in the new repository to make sure that the index file is up-to-date.
+in the new repository to make sure that the index file is up to date.
 
 Note that the second point is true even across machines. You can
 duplicate a remote Git repository with *any* regular copy mechanism, be it
@@ -701,7 +701,7 @@ $ git checkout-index -u -a
 ----------------
 
 where the `-u` flag means that you want the checkout to keep the index
-up-to-date (so that you don't have to refresh it afterward), and the
+up to date (so that you don't have to refresh it afterward), and the
 `-a` flag means "check out all files" (if you have a stale copy or an
 older version of a checked out tree you may also need to add the `-f`
 flag first, to tell 'git checkout-index' to *force* overwriting of any old
@@ -1283,7 +1283,7 @@ run a single command, 'git-receive-pack'.
 
 First, you need to create an empty repository on the remote
 machine that will house your public repository. This empty
-repository will be populated and be kept up-to-date by pushing
+repository will be populated and be kept up to date by pushing
 into it later. Obviously, this repository creation needs to be
 done only once.
 
@@ -1450,7 +1450,7 @@ transport protocols (HTTP), you need to keep this repository
 would contain a call to 'git update-server-info'
 but you need to manually enable the hook with
 `mv post-update.sample post-update`.  This makes sure
-'git update-server-info' keeps the necessary files up-to-date.
+'git update-server-info' keeps the necessary files up to date.
 
 3. Push into the public repository from your primary
    repository.

Documentation/githooks.txt

@@ -369,7 +369,7 @@ them.
 
 When enabled, the default 'post-update' hook runs
 'git update-server-info' to keep the information used by dumb
-transports (e.g., HTTP) up-to-date.  If you are publishing
+transports (e.g., HTTP) up to date.  If you are publishing
 a Git repository that is accessible via HTTP, you should
 probably enable this hook.
 

Documentation/gitrepository-layout.txt

@@ -71,7 +71,7 @@ objects/info/packs::
 	This file is to help dumb transports discover what packs
 	are available in this object store.  Whenever a pack is
 	added or removed, `git update-server-info` should be run
-	to keep this file up-to-date if the repository is
+	to keep this file up to date if the repository is
 	published for dumb transports.  'git repack' does this
 	by default.
 

Documentation/gittutorial.txt

@@ -109,7 +109,7 @@ summary of the situation with 'git status':
 $ git status
 On branch master
 Changes to be committed:
-Your branch is up-to-date with 'origin/master'.
+Your branch is up to date with 'origin/master'.
   (use "git reset HEAD <file>..." to unstage)
 
 	modified:   file1

Documentation/merge-options.txt

@@ -39,7 +39,7 @@ set to `no` at the beginning of them.
 
 --ff-only::
 	Refuse to merge and exit with a non-zero status unless the
-	current `HEAD` is already up-to-date or the merge can be
+	current `HEAD` is already up to date or the merge can be
 	resolved as a fast-forward.
 
 --log[=<n>]::

Documentation/technical/pack-protocol.txt

@@ -199,7 +199,7 @@ After reference and capabilities discovery, the client can decide to
 terminate the connection by sending a flush-pkt, telling the server it can
 now gracefully terminate, and disconnect, when it does not need any pack
 data. This can happen with the ls-remote command, and also can happen when
-the client already is up-to-date.
+the client already is up to date.
 
 Otherwise, it enters the negotiation phase, where the client and
 server determine what the minimal packfile necessary for transport is,

Documentation/technical/trivial-merge.txt

@@ -32,7 +32,7 @@ or the result.
 If multiple cases apply, the one used is listed first.
 
 A result which changes the index is an error if the index is not empty
-and not up-to-date.
+and not up to date.
 
 Entries marked '+' have stat information. Spaces marked '*' don't
 affect the result.
@@ -65,7 +65,7 @@ empty, no entry is left for that stage). Otherwise, the given entry is
 left in stage 0, and there are no other entries.
 
 A result of "no merge" is an error if the index is not empty and not
-up-to-date.
+up to date.
 
 *empty* means that the tree must not have a directory-file conflict
  with the entry.

Documentation/user-manual.txt

@@ -2195,7 +2195,7 @@ $ cd work
 Linus's tree will be stored in the remote-tracking branch named origin/master,
 and can be updated using linkgit:git-fetch[1]; you can track other
 public trees using linkgit:git-remote[1] to set up a "remote" and
-linkgit:git-fetch[1] to keep them up-to-date; see
+linkgit:git-fetch[1] to keep them up to date; see
 <<repositories-and-branches>>.
 
 Now create the branches in which you are going to work; these start out

builtin/merge.c

@@ -1345,7 +1345,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix)
 		 * If head can reach all the merge then we are up to date.
 		 * but first the most common case of merging one remote.
 		 */
-		finish_up_to_date(_("Already up-to-date."));
+		finish_up_to_date(_("Already up to date."));
 		goto done;
 	} else if (fast_forward != FF_NO && !remoteheads->next &&
 			!common->next &&
@@ -1428,7 +1428,7 @@ int cmd_merge(int argc, const char **argv, const char *prefix)
 			}
 		}
 		if (up_to_date) {
-			finish_up_to_date(_("Already up-to-date. Yeeah!"));
+			finish_up_to_date(_("Already up to date. Yeeah!"));
 			goto done;
 		}
 	}

contrib/examples/git-merge.sh

@@ -399,7 +399,7 @@ case "$allow_fast_forward,$#,$common,$no_commit" in
 ?,1,"$1",*)
 	# If head can reach all the merge then we are up to date.
 	# but first the most common case of merging one remote.
-	finish_up_to_date "Already up-to-date."
+	finish_up_to_date "Already up to date."
 	exit 0
 	;;
 t,1,"$head",*)
@@ -459,7 +459,7 @@ t,1,"$head",*)
 	done
 	if test "$up_to_date" = t
 	then
-		finish_up_to_date "Already up-to-date. Yeeah!"
+		finish_up_to_date "Already up to date. Yeeah!"
 		exit 0
 	fi
 	;;

contrib/examples/git-resolve.sh

@@ -41,7 +41,7 @@ fi
 
 case "$common" in
 "$merge")
-	echo "Already up-to-date. Yeeah!"
+	echo "Already up to date. Yeeah!"
 	dropheads
 	exit 0
 	;;

contrib/subtree/t/t7900-subtree.sh

@@ -253,7 +253,7 @@ test_expect_success 'merge the added subproj again, should do nothing' '
 		# this shouldn not actually do anything, since FETCH_HEAD
 		# is already a parent
 		result=$(git merge -s ours -m "merge -s -ours" FETCH_HEAD) &&
-		check_equal "${result}" "Already up-to-date."
+		check_equal "${result}" "Already up to date."
 	)
 '
 

git-gui/po/README

@@ -165,7 +165,7 @@ to contribute an update.  This may be because you would want to improve
 the translation of existing messages, or because the git-gui software
 itself was updated and there are new messages that need translation.
 
-In any case, make sure you are up-to-date before starting your work:
+In any case, make sure you are up to date before starting your work:
 
 	$ git checkout master
 	$ git pull

git-merge-octopus.sh

@@ -74,7 +74,7 @@ do
 
 	case "$LF$common$LF" in
 	*"$LF$SHA1$LF"*)
-		eval_gettextln "Already up-to-date with \$pretty_name"
+		eval_gettextln "Already up to date with \$pretty_name"
 		continue
 		;;
 	esac

git-p4.py

@@ -3614,7 +3614,7 @@ class P4Rebase(Command):
 
     def rebase(self):
         if os.system("git update-index --refresh") != 0:
-            die("Some files in your working directory are modified and different than what is in your index. You can use git update-index <filename> to bring the index up-to-date or stash away all your changes with git stash.");
+            die("Some files in your working directory are modified and different than what is in your index. You can use git update-index <filename> to bring the index up to date or stash away all your changes with git stash.");
         if len(read_pipe("git diff-index HEAD --")) > 0:
             die("You have uncommitted changes. Please commit them before rebasing or stash them away with git stash.");
 

merge-recursive.c

@@ -1927,7 +1927,7 @@ int merge_trees(struct merge_options *o,
 	}
 
 	if (oid_eq(&common->object.oid, &merge->object.oid)) {
-		output(o, 0, _("Already up-to-date!"));
+		output(o, 0, _("Already up to date!"));
 		*result = head;
 		return 1;
 	}

notes-merge.c

@@ -625,7 +625,7 @@ int notes_merge(struct notes_merge_options *o,
 	if (!oidcmp(&remote->object.oid, base_oid)) {
 		/* Already merged; result == local commit */
 		if (o->verbosity >= 2)
-			printf("Already up-to-date!\n");
+			printf("Already up to date!\n");
 		oidcpy(result_oid, &local->object.oid);
 		goto found_result;
 	}

remote.c

@@ -2080,7 +2080,7 @@ int format_tracking_info(struct branch *branch, struct strbuf *sb)
 				_("  (use \"git branch --unset-upstream\" to fixup)\n"));
 	} else if (!ours && !theirs) {
 		strbuf_addf(sb,
-			_("Your branch is up-to-date with '%s'.\n"),
+			_("Your branch is up to date with '%s'.\n"),
 			base);
 	} else if (!theirs) {
 		strbuf_addf(sb,

t/t6040-tracking-info.sh

@@ -100,7 +100,7 @@ test_expect_success 'checkout (up-to-date with upstream)' '
 	(
 		cd test && git checkout b6
 	) >actual &&
-	test_i18ngrep "Your branch is up-to-date with .origin/master" actual
+	test_i18ngrep "Your branch is up to date with .origin/master" actual
 '
 
 test_expect_success 'status (diverged from upstream)' '
@@ -130,7 +130,7 @@ test_expect_success 'status (up-to-date with upstream)' '
 		# reports nothing to commit
 		test_must_fail git commit --dry-run
 	) >actual &&
-	test_i18ngrep "Your branch is up-to-date with .origin/master" actual
+	test_i18ngrep "Your branch is up to date with .origin/master" actual
 '
 
 cat >expect <<\EOF

templates/hooks--pre-rebase.sample

@@ -58,7 +58,7 @@ then
 	not_in_topic=`git rev-list "^$topic" master`
 	if test -z "$not_in_topic"
 	then
-		echo >&2 "$topic is already up-to-date with master"
+		echo >&2 "$topic is already up to date with master"
 		exit 1 ;# we could allow it, but there is no point.
 	else
 		exit 0

unpack-trees.c

@@ -162,7 +162,7 @@ void setup_unpack_trees_porcelain(struct unpack_trees_options *opts,
 	msgs[ERROR_BIND_OVERLAP] = _("Entry '%s' overlaps with '%s'.  Cannot bind.");
 
 	msgs[ERROR_SPARSE_NOT_UPTODATE_FILE] =
-		_("Cannot update sparse checkout: the following entries are not up-to-date:\n%s");
+		_("Cannot update sparse checkout: the following entries are not up to date:\n%s");
 	msgs[ERROR_WOULD_LOSE_ORPHANED_OVERWRITTEN] =
 		_("The following working tree files would be overwritten by sparse checkout update:\n%s");
 	msgs[ERROR_WOULD_LOSE_ORPHANED_REMOVED] =