git/submodule.h

47 lines
1.9 KiB
C
Raw Normal View History

#ifndef SUBMODULE_H
#define SUBMODULE_H
Add the option "--ignore-submodules" to "git status" In some use cases it is not desirable that "git status" considers submodules that only contain untracked content as dirty. This may happen e.g. when the submodule is not under the developers control and not all build generated files have been added to .gitignore by the upstream developers. Using the "untracked" parameter for the "--ignore-submodules" option disables checking for untracked content and lets git diff report them as changed only when they have new commits or modified content. Sometimes it is not wanted to have submodules show up as changed when they just contain changes to their work tree (this was the behavior before 1.7.0). An example for that are scripts which just want to check for submodule commits while ignoring any changes to the work tree. Also users having large submodules known not to change might want to use this option, as the - sometimes substantial - time it takes to scan the submodule work tree(s) is saved when using the "dirty" parameter. And if you want to ignore any changes to submodules, you can now do that by using this option without parameters or with "all" (when the config option status.submodulesummary is set, using "all" will also suppress the output of the submodule summary). A new function handle_ignore_submodules_arg() is introduced to parse this option new to "git status" in a single location, as "git diff" already knew it. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25 22:56:47 +08:00
struct diff_options;
struct argv_array;
Add the option "--ignore-submodules" to "git status" In some use cases it is not desirable that "git status" considers submodules that only contain untracked content as dirty. This may happen e.g. when the submodule is not under the developers control and not all build generated files have been added to .gitignore by the upstream developers. Using the "untracked" parameter for the "--ignore-submodules" option disables checking for untracked content and lets git diff report them as changed only when they have new commits or modified content. Sometimes it is not wanted to have submodules show up as changed when they just contain changes to their work tree (this was the behavior before 1.7.0). An example for that are scripts which just want to check for submodule commits while ignoring any changes to the work tree. Also users having large submodules known not to change might want to use this option, as the - sometimes substantial - time it takes to scan the submodule work tree(s) is saved when using the "dirty" parameter. And if you want to ignore any changes to submodules, you can now do that by using this option without parameters or with "all" (when the config option status.submodulesummary is set, using "all" will also suppress the output of the submodule summary). A new function handle_ignore_submodules_arg() is introduced to parse this option new to "git status" in a single location, as "git diff" already knew it. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25 22:56:47 +08:00
fetch/pull: recurse into submodules when necessary To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-07 06:10:46 +08:00
enum {
RECURSE_SUBMODULES_CHECK = -4,
RECURSE_SUBMODULES_ERROR = -3,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 08:21:57 +08:00
RECURSE_SUBMODULES_NONE = -2,
fetch/pull: recurse into submodules when necessary To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-07 06:10:46 +08:00
RECURSE_SUBMODULES_ON_DEMAND = -1,
RECURSE_SUBMODULES_OFF = 0,
RECURSE_SUBMODULES_DEFAULT = 1,
RECURSE_SUBMODULES_ON = 2
};
int is_staging_gitmodules_ok(void);
int update_path_in_gitmodules(const char *oldpath, const char *newpath);
rm: delete .gitmodules entry of submodules removed from the work tree Currently using "git rm" on a submodule removes the submodule's work tree from that of the superproject and the gitlink from the index. But the submodule's section in .gitmodules is left untouched, which is a leftover of the now removed submodule and might irritate users (as opposed to the setting in .git/config, this must stay as a reminder that the user showed interest in this submodule so it will be repopulated later when an older commit is checked out). Let "git rm" help the user by not only removing the submodule from the work tree but by also removing the "submodule.<submodule name>" section from the .gitmodules file and stage both. This doesn't happen when the "--cached" option is used, as it would modify the work tree. This also silently does nothing when no .gitmodules file is found and only issues a warning when it doesn't have a section for this submodule. This is because the user might just use plain gitlinks without the .gitmodules file or has already removed the section by hand before issuing the "git rm" command (in which case the warning reminds him that rm would have done that for him). Only when .gitmodules is found and contains merge conflicts the rm command will fail and tell the user to resolve the conflict before trying again. Also extend the man page to inform the user about this new feature. While at it promote the submodule sub-section to a chapter as it made not much sense under "REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM". In t7610 three uses of "git rm submod" had to be replaced with "git rm --cached submod" because that test expects .gitmodules and the work tree to stay untouched. Also in t7400 the tests for the remaining settings in the .gitmodules file had to be changed to assert that these settings are missing. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-07 03:15:25 +08:00
int remove_path_from_gitmodules(const char *path);
void stage_updated_gitmodules(void);
Submodules: Add the new "ignore" config option for diff and status The new "ignore" config option controls the default behavior for "git status" and the diff family. It specifies under what circumstances they consider submodules as modified and can be set separately for each submodule. The command line option "--ignore-submodules=" has been extended to accept the new parameter "none" for both status and diff. Users that chose submodules to get rid of long work tree scanning times might want to set the "dirty" option for those submodules. This brings back the pre 1.7.0 behavior, where submodule work trees were never scanned for modifications. By using "--ignore-submodules=none" on the command line the status and diff commands can be told to do a full scan. This option can be set to the following values (which have the same name and meaning as for the "--ignore-submodules" option of status and diff): "all": All changes to the submodule will be ignored. "dirty": Only differences of the commit recorded in the superproject and the submodules HEAD will be considered modifications, all changes to the work tree of the submodule will be ignored. When using this value, the submodule will not be scanned for work tree changes at all, leading to a performance benefit on large submodules. "untracked": Only untracked files in the submodules work tree are ignored, a changed HEAD and/or modified files in the submodule will mark it as modified. "none" (which is the default): Either untracked or modified files in a submodules work tree or a difference between the subdmodules HEAD and the commit recorded in the superproject will make it show up as changed. This value is added as a new parameter for the "--ignore-submodules" option of the diff family and "git status" so the user can override the settings in the configuration. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06 06:39:25 +08:00
void set_diffopt_flags_from_submodule_config(struct diff_options *diffopt,
const char *path);
int submodule_config(const char *var, const char *value, void *cb);
void gitmodules_config(void);
Add the option "--ignore-submodules" to "git status" In some use cases it is not desirable that "git status" considers submodules that only contain untracked content as dirty. This may happen e.g. when the submodule is not under the developers control and not all build generated files have been added to .gitignore by the upstream developers. Using the "untracked" parameter for the "--ignore-submodules" option disables checking for untracked content and lets git diff report them as changed only when they have new commits or modified content. Sometimes it is not wanted to have submodules show up as changed when they just contain changes to their work tree (this was the behavior before 1.7.0). An example for that are scripts which just want to check for submodule commits while ignoring any changes to the work tree. Also users having large submodules known not to change might want to use this option, as the - sometimes substantial - time it takes to scan the submodule work tree(s) is saved when using the "dirty" parameter. And if you want to ignore any changes to submodules, you can now do that by using this option without parameters or with "all" (when the config option status.submodulesummary is set, using "all" will also suppress the output of the submodule summary). A new function handle_ignore_submodules_arg() is introduced to parse this option new to "git status" in a single location, as "git diff" already knew it. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25 22:56:47 +08:00
void handle_ignore_submodules_arg(struct diff_options *diffopt, const char *);
void show_submodule_summary(FILE *f, const char *path,
const char *line_prefix,
unsigned char one[20], unsigned char two[20],
unsigned dirty_submodule, const char *meta,
const char *del, const char *add, const char *reset);
void set_config_fetch_recurse_submodules(int value);
fetch/pull: recurse into submodules when necessary To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-07 06:10:46 +08:00
void check_for_new_submodule_commits(unsigned char new_sha1[20]);
int fetch_populated_submodules(const struct argv_array *options,
const char *prefix, int command_line_option,
int quiet, int max_parallel_jobs);
unsigned is_submodule_modified(const char *path, int ignore_untracked);
submodule: teach rm to remove submodules unless they contain a git directory Currently using "git rm" on a submodule - populated or not - fails with this error: fatal: git rm: '<submodule path>': Is a directory This made sense in the past as there was no way to remove a submodule without possibly removing unpushed parts of the submodule's history contained in its .git directory too, so erroring out here protected the user from possible loss of data. But submodules cloned with a recent git version do not contain the .git directory anymore, they use a gitfile to point to their git directory which is safely stored inside the superproject's .git directory. The work tree of these submodules can safely be removed without losing history, so let's teach git to do so. Using rm on an unpopulated submodule now removes the empty directory from the work tree and the gitlink from the index. If the submodule's directory is missing from the work tree, it will still be removed from the index. Using rm on a populated submodule using a gitfile will apply the usual checks for work tree modification adapted to submodules (unless forced). For a submodule that means that the HEAD is the same as recorded in the index, no tracked files are modified and no untracked files that aren't ignored are present in the submodules work tree (ignored files are deemed expendable and won't stop a submodule's work tree from being removed). That logic has to be applied in all nested submodules too. Using rm on a submodule which has its .git directory inside the work trees top level directory will just error out like it did before to protect the repository, even when forced. In the future git could either provide a message informing the user to convert the submodule to use a gitfile or even attempt to do the conversion itself, but that is not part of this change. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-27 02:21:13 +08:00
int submodule_uses_gitfile(const char *path);
int ok_to_remove_submodule(const char *path);
int merge_submodule(unsigned char result[20], const char *path, const unsigned char base[20],
const unsigned char a[20], const unsigned char b[20], int search);
int find_unpushed_submodules(unsigned char new_sha1[20], const char *remotes_name,
struct string_list *needs_pushing);
int push_unpushed_submodules(unsigned char new_sha1[20], const char *remotes_name);
void connect_work_tree_and_git_dir(const char *work_tree, const char *git_dir);
#endif