git/diff.c

6650 lines
182 KiB
C
Raw Normal View History

/*
* Copyright (C) 2005 Junio C Hamano
*/
#include "cache.h"
#include "config.h"
#include "tempfile.h"
#include "quote.h"
#include "diff.h"
#include "diffcore.h"
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
#include "delta.h"
#include "xdiff-interface.h"
#include "color.h"
#include "attr.h"
#include "run-command.h"
#include "utf8.h"
#include "object-store.h"
#include "userdiff.h"
#include "submodule-config.h"
#include "submodule.h"
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
#include "hashmap.h"
#include "ll-merge.h"
#include "string-list.h"
#include "argv-array.h"
#include "graph.h"
#include "packfile.h"
#include "parse-options.h"
#include "help.h"
Avoid accessing a slow working copy during diffcore operations. The Cygwin folks have done a fine job at creating a POSIX layer on Windows That Just Works(tm). However it comes with a penalty; accessing files in the working tree by way of stat/open/mmap can be slower for diffcore than inflating the data from a blob which is stored in a packfile. This performance problem is especially an issue in merge-recursive when dealing with nearly 7000 added files, as we are loading each file's content from the working directory to perform rename detection. I have literally seen (and sadly watched) paint dry in less time than it takes for merge-recursive to finish such a merge. On the other hand this very same merge runs very fast on Solaris. If Git is compiled with NO_FAST_WORKING_DIRECTORY set then we will avoid looking at the working directory when the blob in question is available within a packfile and the caller doesn't need the data unpacked into a temporary file. We don't use loose objects as they have the same open/mmap/close costs as the working directory file access, but have the additional CPU overhead of needing to inflate the content before use. So it is still faster to use the working tree file over the loose object. If the caller needs the file data unpacked into a temporary file its likely because they are going to call an external diff program, passing the file as a parameter. In this case reusing the working tree file will be faster as we don't need to inflate the data and write it out to a temporary file. The NO_FAST_WORKING_DIRECTORY feature is enabled by default on Cygwin, as that is the platform which currently appears to benefit the most from this option. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-14 19:15:57 +08:00
#ifdef NO_FAST_WORKING_DIRECTORY
#define FAST_WORKING_DIRECTORY 0
#else
#define FAST_WORKING_DIRECTORY 1
#endif
static int diff_detect_rename_default;
static int diff_indent_heuristic = 1;
static int diff_rename_limit_default = 400;
static int diff_suppress_blank_empty;
static int diff_use_color_default = -1;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
static int diff_color_moved_default;
static int diff_color_moved_ws_default;
static int diff_context_default = 3;
static int diff_interhunk_context_default;
static const char *diff_word_regex_cfg;
static const char *external_diff_cmd_cfg;
static const char *diff_order_file_cfg;
int diff_auto_refresh_index = 1;
static int diff_mnemonic_prefix;
static int diff_no_prefix;
static int diff_stat_graph_width;
static int diff_dirstat_permille_default = 30;
static struct diff_options default_diff_options;
static long diff_algorithm;
static unsigned ws_error_highlight_default = WSEH_NEW;
static char diff_colors[][COLOR_MAXLEN] = {
GIT_COLOR_RESET,
GIT_COLOR_NORMAL, /* CONTEXT */
GIT_COLOR_BOLD, /* METAINFO */
GIT_COLOR_CYAN, /* FRAGINFO */
GIT_COLOR_RED, /* OLD */
GIT_COLOR_GREEN, /* NEW */
GIT_COLOR_YELLOW, /* COMMIT */
GIT_COLOR_BG_RED, /* WHITESPACE */
GIT_COLOR_NORMAL, /* FUNCINFO */
GIT_COLOR_BOLD_MAGENTA, /* OLD_MOVED */
GIT_COLOR_BOLD_BLUE, /* OLD_MOVED ALTERNATIVE */
GIT_COLOR_FAINT, /* OLD_MOVED_DIM */
GIT_COLOR_FAINT_ITALIC, /* OLD_MOVED_ALTERNATIVE_DIM */
GIT_COLOR_BOLD_CYAN, /* NEW_MOVED */
GIT_COLOR_BOLD_YELLOW, /* NEW_MOVED ALTERNATIVE */
GIT_COLOR_FAINT, /* NEW_MOVED_DIM */
GIT_COLOR_FAINT_ITALIC, /* NEW_MOVED_ALTERNATIVE_DIM */
range-diff: use dim/bold cues to improve dual color mode It *is* a confusing thing to look at a diff of diffs. All too easy is it to mix up whether the -/+ markers refer to the "inner" or the "outer" diff, i.e. whether a `+` indicates that a line was added by either the old or the new diff (or both), or whether the new diff does something different than the old diff. To make things easier to process for normal developers, we introduced the dual color mode which colors the lines according to the commit diff, i.e. lines that are added by a commit (whether old, new, or both) are colored in green. In non-dual color mode, the lines would be colored according to the outer diff: if the old commit added a line, it would be colored red (because that line addition is only present in the first commit range that was specified on the command-line, i.e. the "old" commit, but not in the second commit range, i.e. the "new" commit). However, this dual color mode is still not making things clear enough, as we are looking at two levels of diffs, and we still only pick a color according to *one* of them (the outer diff marker is colored differently, of course, but in particular with deep indentation, it is easy to lose track of that outer diff marker's background color). Therefore, let's add another dimension to the mix. Still use green/red/normal according to the commit diffs, but now also dim the lines that were only in the old commit, and use bold face for the lines that are only in the new commit. That way, it is much easier not to lose track of, say, when we are looking at a line that was added in the previous iteration of a patch series but the new iteration adds a slightly different version: the obsolete change will be dimmed, the current version of the patch will be bold. At least this developer has a much easier time reading the range-diffs that way. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 19:33:32 +08:00
GIT_COLOR_FAINT, /* CONTEXT_DIM */
GIT_COLOR_FAINT_RED, /* OLD_DIM */
GIT_COLOR_FAINT_GREEN, /* NEW_DIM */
GIT_COLOR_BOLD, /* CONTEXT_BOLD */
GIT_COLOR_BOLD_RED, /* OLD_BOLD */
GIT_COLOR_BOLD_GREEN, /* NEW_BOLD */
};
static const char *color_diff_slots[] = {
[DIFF_CONTEXT] = "context",
[DIFF_METAINFO] = "meta",
[DIFF_FRAGINFO] = "frag",
[DIFF_FILE_OLD] = "old",
[DIFF_FILE_NEW] = "new",
[DIFF_COMMIT] = "commit",
[DIFF_WHITESPACE] = "whitespace",
[DIFF_FUNCINFO] = "func",
[DIFF_FILE_OLD_MOVED] = "oldMoved",
[DIFF_FILE_OLD_MOVED_ALT] = "oldMovedAlternative",
[DIFF_FILE_OLD_MOVED_DIM] = "oldMovedDimmed",
[DIFF_FILE_OLD_MOVED_ALT_DIM] = "oldMovedAlternativeDimmed",
[DIFF_FILE_NEW_MOVED] = "newMoved",
[DIFF_FILE_NEW_MOVED_ALT] = "newMovedAlternative",
[DIFF_FILE_NEW_MOVED_DIM] = "newMovedDimmed",
[DIFF_FILE_NEW_MOVED_ALT_DIM] = "newMovedAlternativeDimmed",
range-diff: use dim/bold cues to improve dual color mode It *is* a confusing thing to look at a diff of diffs. All too easy is it to mix up whether the -/+ markers refer to the "inner" or the "outer" diff, i.e. whether a `+` indicates that a line was added by either the old or the new diff (or both), or whether the new diff does something different than the old diff. To make things easier to process for normal developers, we introduced the dual color mode which colors the lines according to the commit diff, i.e. lines that are added by a commit (whether old, new, or both) are colored in green. In non-dual color mode, the lines would be colored according to the outer diff: if the old commit added a line, it would be colored red (because that line addition is only present in the first commit range that was specified on the command-line, i.e. the "old" commit, but not in the second commit range, i.e. the "new" commit). However, this dual color mode is still not making things clear enough, as we are looking at two levels of diffs, and we still only pick a color according to *one* of them (the outer diff marker is colored differently, of course, but in particular with deep indentation, it is easy to lose track of that outer diff marker's background color). Therefore, let's add another dimension to the mix. Still use green/red/normal according to the commit diffs, but now also dim the lines that were only in the old commit, and use bold face for the lines that are only in the new commit. That way, it is much easier not to lose track of, say, when we are looking at a line that was added in the previous iteration of a patch series but the new iteration adds a slightly different version: the obsolete change will be dimmed, the current version of the patch will be bold. At least this developer has a much easier time reading the range-diffs that way. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 19:33:32 +08:00
[DIFF_CONTEXT_DIM] = "contextDimmed",
[DIFF_FILE_OLD_DIM] = "oldDimmed",
[DIFF_FILE_NEW_DIM] = "newDimmed",
[DIFF_CONTEXT_BOLD] = "contextBold",
[DIFF_FILE_OLD_BOLD] = "oldBold",
[DIFF_FILE_NEW_BOLD] = "newBold",
};
define_list_config_array_extra(color_diff_slots, {"plain"});
static int parse_diff_color_slot(const char *var)
{
if (!strcasecmp(var, "plain"))
return DIFF_CONTEXT;
return LOOKUP_CONFIG(color_diff_slots, var);
}
static int parse_dirstat_params(struct diff_options *options, const char *params_string,
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
struct strbuf *errmsg)
{
char *params_copy = xstrdup(params_string);
struct string_list params = STRING_LIST_INIT_NODUP;
int ret = 0;
int i;
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
if (*params_copy)
string_list_split_in_place(&params, params_copy, ',', -1);
for (i = 0; i < params.nr; i++) {
const char *p = params.items[i].string;
if (!strcmp(p, "changes")) {
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.dirstat_by_line = 0;
options->flags.dirstat_by_file = 0;
} else if (!strcmp(p, "lines")) {
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.dirstat_by_line = 1;
options->flags.dirstat_by_file = 0;
} else if (!strcmp(p, "files")) {
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.dirstat_by_line = 0;
options->flags.dirstat_by_file = 1;
} else if (!strcmp(p, "noncumulative")) {
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.dirstat_cumulative = 0;
} else if (!strcmp(p, "cumulative")) {
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.dirstat_cumulative = 1;
} else if (isdigit(*p)) {
char *end;
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
int permille = strtoul(p, &end, 10) * 10;
if (*end == '.' && isdigit(*++end)) {
/* only use first digit */
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
permille += *end - '0';
/* .. and ignore any further digits */
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
while (isdigit(*++end))
; /* nothing */
}
if (!*end)
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
options->dirstat_permille = permille;
else {
strbuf_addf(errmsg, _(" Failed to parse dirstat cut-off percentage '%s'\n"),
p);
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
ret++;
}
} else {
strbuf_addf(errmsg, _(" Unknown dirstat parameter '%s'\n"), p);
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
ret++;
}
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
}
string_list_clear(&params, 0);
free(params_copy);
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
return ret;
}
static int parse_submodule_params(struct diff_options *options, const char *value)
{
if (!strcmp(value, "log"))
options->submodule_format = DIFF_SUBMODULE_LOG;
else if (!strcmp(value, "short"))
options->submodule_format = DIFF_SUBMODULE_SHORT;
else if (!strcmp(value, "diff"))
options->submodule_format = DIFF_SUBMODULE_INLINE_DIFF;
else
return -1;
return 0;
}
int git_config_rename(const char *var, const char *value)
{
if (!value)
return DIFF_DETECT_RENAME;
if (!strcasecmp(value, "copies") || !strcasecmp(value, "copy"))
return DIFF_DETECT_COPY;
return git_config_bool(var,value) ? DIFF_DETECT_RENAME : 0;
}
long parse_algorithm_value(const char *value)
{
if (!value)
return -1;
else if (!strcasecmp(value, "myers") || !strcasecmp(value, "default"))
return 0;
else if (!strcasecmp(value, "minimal"))
return XDF_NEED_MINIMAL;
else if (!strcasecmp(value, "patience"))
return XDF_PATIENCE_DIFF;
else if (!strcasecmp(value, "histogram"))
return XDF_HISTOGRAM_DIFF;
return -1;
}
static int parse_one_token(const char **arg, const char *token)
{
const char *rest;
if (skip_prefix(*arg, token, &rest) && (!*rest || *rest == ',')) {
*arg = rest;
return 1;
}
return 0;
}
static int parse_ws_error_highlight(const char *arg)
{
const char *orig_arg = arg;
unsigned val = 0;
while (*arg) {
if (parse_one_token(&arg, "none"))
val = 0;
else if (parse_one_token(&arg, "default"))
val = WSEH_NEW;
else if (parse_one_token(&arg, "all"))
val = WSEH_NEW | WSEH_OLD | WSEH_CONTEXT;
else if (parse_one_token(&arg, "new"))
val |= WSEH_NEW;
else if (parse_one_token(&arg, "old"))
val |= WSEH_OLD;
else if (parse_one_token(&arg, "context"))
val |= WSEH_CONTEXT;
else {
return -1 - (int)(arg - orig_arg);
}
if (*arg)
arg++;
}
return val;
}
/*
* These are to give UI layer defaults.
* The core-level commands such as git-diff-files should
* never be affected by the setting of diff.renames
* the user happens to have in the configuration file.
*/
void init_diff_ui_defaults(void)
{
diff_detect_rename_default = DIFF_DETECT_RENAME;
}
int git_diff_heuristic_config(const char *var, const char *value, void *cb)
{
if (!strcmp(var, "diff.indentheuristic"))
diff_indent_heuristic = git_config_bool(var, value);
return 0;
}
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
static int parse_color_moved(const char *arg)
{
switch (git_parse_maybe_bool(arg)) {
case 0:
return COLOR_MOVED_NO;
case 1:
return COLOR_MOVED_DEFAULT;
default:
break;
}
if (!strcmp(arg, "no"))
return COLOR_MOVED_NO;
else if (!strcmp(arg, "plain"))
return COLOR_MOVED_PLAIN;
else if (!strcmp(arg, "blocks"))
return COLOR_MOVED_BLOCKS;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
else if (!strcmp(arg, "zebra"))
return COLOR_MOVED_ZEBRA;
else if (!strcmp(arg, "default"))
return COLOR_MOVED_DEFAULT;
else if (!strcmp(arg, "dimmed-zebra"))
return COLOR_MOVED_ZEBRA_DIM;
else if (!strcmp(arg, "dimmed_zebra"))
return COLOR_MOVED_ZEBRA_DIM;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
else
return error(_("color moved setting must be one of 'no', 'default', 'blocks', 'zebra', 'dimmed-zebra', 'plain'"));
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
}
static unsigned parse_color_moved_ws(const char *arg)
diff.c: decouple white space treatment from move detection algorithm In the original implementation of the move detection logic the choice for ignoring white space changes is the same for the move detection as it is for the regular diff. Some cases came up where different treatment would have been nice. Allow the user to specify that white space should be ignored differently during detection of moved lines than during generation of added and removed lines. This is done by providing analogs to the --ignore-space-at-eol, -b, and -w options by introducing the option --color-moved-ws=<modes> with the modes named "ignore-space-at-eol", "ignore-space-change" and "ignore-all-space", which is used only during the move detection phase. As we change the default, we'll adjust the tests. For now we do not infer any options to treat white spaces in the move detection from the generic white space options given to diff. This can be tuned later to reasonable default. As we plan on adding more white space related options in a later patch, that interferes with the current white space options, use a flag field and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily check at parse time if we give invalid combinations and (b) can reuse parts of this patch. By having the white space treatment in its own option, we'll also make it easier for a later patch to have an config option for spaces in the move detection. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 07:05:40 +08:00
{
int ret = 0;
struct string_list l = STRING_LIST_INIT_DUP;
struct string_list_item *i;
string_list_split(&l, arg, ',', -1);
for_each_string_list_item(i, &l) {
struct strbuf sb = STRBUF_INIT;
strbuf_addstr(&sb, i->string);
strbuf_trim(&sb);
if (!strcmp(sb.buf, "ignore-space-change"))
ret |= XDF_IGNORE_WHITESPACE_CHANGE;
else if (!strcmp(sb.buf, "ignore-space-at-eol"))
ret |= XDF_IGNORE_WHITESPACE_AT_EOL;
else if (!strcmp(sb.buf, "ignore-all-space"))
ret |= XDF_IGNORE_WHITESPACE;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
else if (!strcmp(sb.buf, "allow-indentation-change"))
ret |= COLOR_MOVED_WS_ALLOW_INDENTATION_CHANGE;
else {
ret |= COLOR_MOVED_WS_ERROR;
error(_("unknown color-moved-ws mode '%s', possible values are 'ignore-space-change', 'ignore-space-at-eol', 'ignore-all-space', 'allow-indentation-change'"), sb.buf);
}
diff.c: decouple white space treatment from move detection algorithm In the original implementation of the move detection logic the choice for ignoring white space changes is the same for the move detection as it is for the regular diff. Some cases came up where different treatment would have been nice. Allow the user to specify that white space should be ignored differently during detection of moved lines than during generation of added and removed lines. This is done by providing analogs to the --ignore-space-at-eol, -b, and -w options by introducing the option --color-moved-ws=<modes> with the modes named "ignore-space-at-eol", "ignore-space-change" and "ignore-all-space", which is used only during the move detection phase. As we change the default, we'll adjust the tests. For now we do not infer any options to treat white spaces in the move detection from the generic white space options given to diff. This can be tuned later to reasonable default. As we plan on adding more white space related options in a later patch, that interferes with the current white space options, use a flag field and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily check at parse time if we give invalid combinations and (b) can reuse parts of this patch. By having the white space treatment in its own option, we'll also make it easier for a later patch to have an config option for spaces in the move detection. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 07:05:40 +08:00
strbuf_release(&sb);
}
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
if ((ret & COLOR_MOVED_WS_ALLOW_INDENTATION_CHANGE) &&
(ret & XDF_WHITESPACE_FLAGS)) {
error(_("color-moved-ws: allow-indentation-change cannot be combined with other white space modes"));
ret |= COLOR_MOVED_WS_ERROR;
}
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
diff.c: decouple white space treatment from move detection algorithm In the original implementation of the move detection logic the choice for ignoring white space changes is the same for the move detection as it is for the regular diff. Some cases came up where different treatment would have been nice. Allow the user to specify that white space should be ignored differently during detection of moved lines than during generation of added and removed lines. This is done by providing analogs to the --ignore-space-at-eol, -b, and -w options by introducing the option --color-moved-ws=<modes> with the modes named "ignore-space-at-eol", "ignore-space-change" and "ignore-all-space", which is used only during the move detection phase. As we change the default, we'll adjust the tests. For now we do not infer any options to treat white spaces in the move detection from the generic white space options given to diff. This can be tuned later to reasonable default. As we plan on adding more white space related options in a later patch, that interferes with the current white space options, use a flag field and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily check at parse time if we give invalid combinations and (b) can reuse parts of this patch. By having the white space treatment in its own option, we'll also make it easier for a later patch to have an config option for spaces in the move detection. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 07:05:40 +08:00
string_list_clear(&l, 0);
return ret;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
}
int git_diff_ui_config(const char *var, const char *value, void *cb)
{
if (!strcmp(var, "diff.color") || !strcmp(var, "color.diff")) {
diff_use_color_default = git_config_colorbool(var, value);
return 0;
}
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
if (!strcmp(var, "diff.colormoved")) {
int cm = parse_color_moved(value);
if (cm < 0)
return -1;
diff_color_moved_default = cm;
return 0;
}
if (!strcmp(var, "diff.colormovedws")) {
unsigned cm = parse_color_moved_ws(value);
if (cm & COLOR_MOVED_WS_ERROR)
return -1;
diff_color_moved_ws_default = cm;
return 0;
}
if (!strcmp(var, "diff.context")) {
diff_context_default = git_config_int(var, value);
if (diff_context_default < 0)
return -1;
return 0;
}
if (!strcmp(var, "diff.interhunkcontext")) {
diff_interhunk_context_default = git_config_int(var, value);
if (diff_interhunk_context_default < 0)
return -1;
return 0;
}
if (!strcmp(var, "diff.renames")) {
diff_detect_rename_default = git_config_rename(var, value);
return 0;
}
if (!strcmp(var, "diff.autorefreshindex")) {
diff_auto_refresh_index = git_config_bool(var, value);
return 0;
}
if (!strcmp(var, "diff.mnemonicprefix")) {
diff_mnemonic_prefix = git_config_bool(var, value);
return 0;
}
if (!strcmp(var, "diff.noprefix")) {
diff_no_prefix = git_config_bool(var, value);
return 0;
}
if (!strcmp(var, "diff.statgraphwidth")) {
diff_stat_graph_width = git_config_int(var, value);
return 0;
}
if (!strcmp(var, "diff.external"))
return git_config_string(&external_diff_cmd_cfg, var, value);
if (!strcmp(var, "diff.wordregex"))
return git_config_string(&diff_word_regex_cfg, var, value);
if (!strcmp(var, "diff.orderfile"))
return git_config_pathname(&diff_order_file_cfg, var, value);
if (!strcmp(var, "diff.ignoresubmodules"))
handle_ignore_submodules_arg(&default_diff_options, value);
if (!strcmp(var, "diff.submodule")) {
if (parse_submodule_params(&default_diff_options, value))
warning(_("Unknown value for 'diff.submodule' config variable: '%s'"),
value);
return 0;
}
if (!strcmp(var, "diff.algorithm")) {
diff_algorithm = parse_algorithm_value(value);
if (diff_algorithm < 0)
return -1;
return 0;
}
if (!strcmp(var, "diff.wserrorhighlight")) {
int val = parse_ws_error_highlight(value);
if (val < 0)
return -1;
ws_error_highlight_default = val;
return 0;
}
if (git_color_config(var, value, cb) < 0)
return -1;
return git_diff_basic_config(var, value, cb);
}
int git_diff_basic_config(const char *var, const char *value, void *cb)
{
const char *name;
if (!strcmp(var, "diff.renamelimit")) {
diff_rename_limit_default = git_config_int(var, value);
return 0;
}
drop odd return value semantics from userdiff_config When the userdiff_config function was introduced in be58e70 (diff: unify external diff and funcname parsing code, 2008-10-05), it used a return value convention unlike any other config callback. Like other callbacks, it used "-1" to signal error. But it returned "1" to indicate that it found something, and "0" otherwise; other callbacks simply returned "0" to indicate that no error occurred. This distinction was necessary at the time, because the userdiff namespace overlapped slightly with the color configuration namespace. So "diff.color.foo" could mean "the 'foo' slot of diff coloring" or "the 'foo' component of the "color" userdiff driver". Because the color-parsing code would die on an unknown color slot, we needed the userdiff code to indicate that it had matched the variable, letting us bypass the color-parsing code entirely. Later, in 8b8e862 (ignore unknown color configuration, 2009-12-12), the color-parsing code learned to silently ignore unknown slots. This means we no longer need to protect userdiff-matched variables from reaching the color-parsing code. We can therefore change the userdiff_config calling convention to a more normal one. This drops some code from each caller, which is nice. But more importantly, it reduces the cognitive load for readers who may wonder why userdiff_config is unlike every other config callback. There's no need to add a new test confirming that this works; t4020 already contains a test that sets diff.color.external. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-08 02:23:02 +08:00
if (userdiff_config(var, value) < 0)
return -1;
if (skip_prefix(var, "diff.color.", &name) ||
skip_prefix(var, "color.diff.", &name)) {
int slot = parse_diff_color_slot(name);
2009-12-12 20:25:24 +08:00
if (slot < 0)
return 0;
if (!value)
return config_error_nonbool(var);
return color_parse(value, diff_colors[slot]);
}
/* like GNU diff's --suppress-blank-empty option */
if (!strcmp(var, "diff.suppressblankempty") ||
/* for backwards compatibility */
!strcmp(var, "diff.suppress-blank-empty")) {
diff_suppress_blank_empty = git_config_bool(var, value);
return 0;
}
if (!strcmp(var, "diff.dirstat")) {
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
struct strbuf errmsg = STRBUF_INIT;
default_diff_options.dirstat_permille = diff_dirstat_permille_default;
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
if (parse_dirstat_params(&default_diff_options, value, &errmsg))
warning(_("Found errors in 'diff.dirstat' config variable:\n%s"),
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
errmsg.buf);
strbuf_release(&errmsg);
diff_dirstat_permille_default = default_diff_options.dirstat_permille;
return 0;
}
if (git_diff_heuristic_config(var, value, cb) < 0)
return -1;
return git_default_config(var, value, cb);
}
static char *quote_two(const char *one, const char *two)
{
int need_one = quote_c_style(one, NULL, NULL, 1);
int need_two = quote_c_style(two, NULL, NULL, 1);
struct strbuf res = STRBUF_INIT;
if (need_one + need_two) {
strbuf_addch(&res, '"');
quote_c_style(one, &res, NULL, 1);
quote_c_style(two, &res, NULL, 1);
strbuf_addch(&res, '"');
} else {
strbuf_addstr(&res, one);
strbuf_addstr(&res, two);
}
return strbuf_detach(&res, NULL);
}
static const char *external_diff(void)
{
static const char *external_diff_cmd = NULL;
static int done_preparing = 0;
if (done_preparing)
return external_diff_cmd;
external_diff_cmd = getenv("GIT_EXTERNAL_DIFF");
if (!external_diff_cmd)
external_diff_cmd = external_diff_cmd_cfg;
done_preparing = 1;
return external_diff_cmd;
}
/*
* Keep track of files used for diffing. Sometimes such an entry
* refers to a temporary file, sometimes to an existing file, and
* sometimes to "/dev/null".
*/
static struct diff_tempfile {
/*
* filename external diff should read from, or NULL if this
* entry is currently not in use:
*/
const char *name;
char hex[GIT_MAX_HEXSZ + 1];
char mode[10];
/*
* If this diff_tempfile instance refers to a temporary file,
* this tempfile object is used to manage its lifetime.
*/
tempfile: auto-allocate tempfiles on heap The previous commit taught the tempfile code to give up ownership over tempfiles that have been renamed or deleted. That makes it possible to use a stack variable like this: struct tempfile t; create_tempfile(&t, ...); ... if (!err) rename_tempfile(&t, ...); else delete_tempfile(&t); But doing it this way has a high potential for creating memory errors. The tempfile we pass to create_tempfile() ends up on a global linked list, and it's not safe for it to go out of scope until we've called one of those two deactivation functions. Imagine that we add an early return from the function that forgets to call delete_tempfile(). With a static or heap tempfile variable, the worst case is that the tempfile hangs around until the program exits (and some functions like setup_shallow_temporary rely on this intentionally, creating a tempfile and then leaving it for later cleanup). But with a stack variable as above, this is a serious memory error: the variable goes out of scope and may be filled with garbage by the time the tempfile code looks at it. Let's see if we can make it harder to get this wrong. Since many callers need to allocate arbitrary numbers of tempfiles, we can't rely on static storage as a general solution. So we need to turn to the heap. We could just ask all callers to pass us a heap variable, but that puts the burden on them to call free() at the right time. Instead, let's have the tempfile code handle the heap allocation _and_ the deallocation (when the tempfile is deactivated and removed from the list). This changes the return value of all of the creation functions. For the cleanup functions (delete and rename), we'll add one extra bit of safety: instead of taking a tempfile pointer, we'll take a pointer-to-pointer and set it to NULL after freeing the object. This makes it safe to double-call functions like delete_tempfile(), as the second call treats the NULL input as a noop. Several callsites follow this pattern. The resulting patch does have a fair bit of noise, as each caller needs to be converted to handle: 1. Storing a pointer instead of the struct itself. 2. Passing the pointer instead of taking the struct address. 3. Handling a "struct tempfile *" return instead of a file descriptor. We could play games to make this less noisy. For example, by defining the tempfile like this: struct tempfile { struct heap_allocated_part_of_tempfile { int fd; ...etc } *actual_data; } Callers would continue to have a "struct tempfile", and it would be "active" only when the inner pointer was non-NULL. But that just makes things more awkward in the long run. There aren't that many callers, so we can simply bite the bullet and adjust all of them. And the compiler makes it easy for us to find them all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-05 20:15:08 +08:00
struct tempfile *tempfile;
} diff_temp[2];
struct emit_callback {
int color_diff;
unsigned ws_rule;
int blank_at_eof_in_preimage;
int blank_at_eof_in_postimage;
int lno_in_preimage;
int lno_in_postimage;
const char **label_path;
struct diff_words_data *diff_words;
struct diff_options *opt;
struct strbuf *header;
};
static int count_lines(const char *data, int size)
{
int count, ch, completely_empty = 1, nl_just_seen = 0;
count = 0;
while (0 < size--) {
ch = *data++;
if (ch == '\n') {
count++;
nl_just_seen = 1;
completely_empty = 0;
}
else {
nl_just_seen = 0;
completely_empty = 0;
}
}
if (completely_empty)
return 0;
if (!nl_just_seen)
count++; /* no trailing newline */
return count;
}
static int fill_mmfile(struct repository *r, mmfile_t *mf,
struct diff_filespec *one)
{
if (!DIFF_FILE_VALID(one)) {
mf->ptr = (char *)""; /* does not matter */
mf->size = 0;
return 0;
}
else if (diff_populate_filespec(r, one, 0))
return -1;
mf->ptr = one->data;
mf->size = one->size;
return 0;
}
/* like fill_mmfile, but only for size, so we can avoid retrieving blob */
static unsigned long diff_filespec_size(struct repository *r,
struct diff_filespec *one)
{
if (!DIFF_FILE_VALID(one))
return 0;
diff_populate_filespec(r, one, CHECK_SIZE_ONLY);
return one->size;
}
static int count_trailing_blank(mmfile_t *mf, unsigned ws_rule)
{
char *ptr = mf->ptr;
long size = mf->size;
int cnt = 0;
if (!size)
return cnt;
ptr += size - 1; /* pointing at the very end */
if (*ptr != '\n')
; /* incomplete line */
else
ptr--; /* skip the last LF */
while (mf->ptr < ptr) {
char *prev_eol;
for (prev_eol = ptr; mf->ptr <= prev_eol; prev_eol--)
if (*prev_eol == '\n')
break;
if (!ws_blank_line(prev_eol + 1, ptr - prev_eol, ws_rule))
break;
cnt++;
ptr = prev_eol - 1;
}
return cnt;
}
static void check_blank_at_eof(mmfile_t *mf1, mmfile_t *mf2,
struct emit_callback *ecbdata)
{
int l1, l2, at;
unsigned ws_rule = ecbdata->ws_rule;
l1 = count_trailing_blank(mf1, ws_rule);
l2 = count_trailing_blank(mf2, ws_rule);
if (l2 <= l1) {
ecbdata->blank_at_eof_in_preimage = 0;
ecbdata->blank_at_eof_in_postimage = 0;
return;
}
at = count_lines(mf1->ptr, mf1->size);
ecbdata->blank_at_eof_in_preimage = (at - l1) + 1;
at = count_lines(mf2->ptr, mf2->size);
ecbdata->blank_at_eof_in_postimage = (at - l2) + 1;
}
static void emit_line_0(struct diff_options *o,
const char *set_sign, const char *set, unsigned reverse, const char *reset,
int first, const char *line, int len)
{
int has_trailing_newline, has_trailing_carriage_return;
int needs_reset = 0; /* at the end of the line */
FILE *file = o->file;
fputs(diff_line_prefix(o), file);
has_trailing_newline = (len > 0 && line[len-1] == '\n');
if (has_trailing_newline)
len--;
has_trailing_carriage_return = (len > 0 && line[len-1] == '\r');
if (has_trailing_carriage_return)
len--;
if (!len && !first)
goto end_of_line;
if (reverse && want_color(o->use_color)) {
fputs(GIT_COLOR_REVERSE, file);
needs_reset = 1;
}
if (set_sign) {
fputs(set_sign, file);
needs_reset = 1;
}
if (first)
fputc(first, file);
if (!len)
goto end_of_line;
if (set) {
if (set_sign && set != set_sign)
fputs(reset, file);
fputs(set, file);
needs_reset = 1;
}
fwrite(line, len, 1, file);
needs_reset = 1; /* 'line' may contain color codes. */
end_of_line:
if (needs_reset)
fputs(reset, file);
if (has_trailing_carriage_return)
fputc('\r', file);
if (has_trailing_newline)
fputc('\n', file);
}
static void emit_line(struct diff_options *o, const char *set, const char *reset,
const char *line, int len)
{
emit_line_0(o, set, NULL, 0, reset, 0, line, len);
}
diff.c: introduce emit_diff_symbol In a later patch we want to buffer all output before emitting it as a new feature ("markup moved lines") conceptually cannot be implemented in a single pass over the output. There are different approaches to buffer all output such as: * Buffering on the char level, i.e. we'd have a char[] which would grow at approximately 80 characters a line. This would keep the output completely unstructured, but might be very easy to implement, such as redirecting all output to a temporary file and working off that. The later passes over the buffer are quite complicated though, because we have to parse back any output and then decide if it should be modified. * Buffer on a line level. As the output is mostly line oriented already, this would make sense, but it still is a bit awkward as we'd have to make sense of it again by looking at the first characters of a line to decide what part of a diff a line is. * Buffer semantically. Imagine there is a formal grammar for the diff output and we'd keep the symbols of this grammar around. This keeps the highest level of structure in the buffered data, such that the actual memory requirements are less than say the first option. Instead of buffering the characters of the line, we'll buffer what we intend to do plus additional information for the specifics. An output of diff --git a/new.txt b/new.txt index fa69b07..412428c 100644 Binary files a/new.txt and b/new.txt differ could be buffered as DIFF_SYMBOL_DIFF_START + new.txt DIFF_SYMBOL_INDEX_MODE + fa69b07 412428c "non-executable" flag DIFF_SYMBOL_BINARY_FILES + new.txt This and the following patches introduce the third option of buffering by first moving any output to emit_diff_symbol, and then introducing the buffering in this function. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:06:49 +08:00
enum diff_symbol {
DIFF_SYMBOL_BINARY_DIFF_HEADER,
DIFF_SYMBOL_BINARY_DIFF_HEADER_DELTA,
DIFF_SYMBOL_BINARY_DIFF_HEADER_LITERAL,
DIFF_SYMBOL_BINARY_DIFF_BODY,
DIFF_SYMBOL_BINARY_DIFF_FOOTER,
DIFF_SYMBOL_STATS_SUMMARY_NO_FILES,
DIFF_SYMBOL_STATS_SUMMARY_ABBREV,
DIFF_SYMBOL_STATS_SUMMARY_INSERTS_DELETES,
DIFF_SYMBOL_STATS_LINE,
DIFF_SYMBOL_WORD_DIFF,
DIFF_SYMBOL_STAT_SEP,
DIFF_SYMBOL_SUMMARY,
DIFF_SYMBOL_SUBMODULE_ADD,
DIFF_SYMBOL_SUBMODULE_DEL,
DIFF_SYMBOL_SUBMODULE_UNTRACKED,
DIFF_SYMBOL_SUBMODULE_MODIFIED,
DIFF_SYMBOL_SUBMODULE_HEADER,
DIFF_SYMBOL_SUBMODULE_ERROR,
DIFF_SYMBOL_SUBMODULE_PIPETHROUGH,
DIFF_SYMBOL_REWRITE_DIFF,
DIFF_SYMBOL_BINARY_FILES,
DIFF_SYMBOL_HEADER,
DIFF_SYMBOL_FILEPAIR_PLUS,
DIFF_SYMBOL_FILEPAIR_MINUS,
DIFF_SYMBOL_WORDS_PORCELAIN,
DIFF_SYMBOL_WORDS,
DIFF_SYMBOL_CONTEXT,
DIFF_SYMBOL_CONTEXT_INCOMPLETE,
DIFF_SYMBOL_PLUS,
DIFF_SYMBOL_MINUS,
DIFF_SYMBOL_NO_LF_EOF,
DIFF_SYMBOL_CONTEXT_FRAGINFO,
DIFF_SYMBOL_CONTEXT_MARKER,
diff.c: introduce emit_diff_symbol In a later patch we want to buffer all output before emitting it as a new feature ("markup moved lines") conceptually cannot be implemented in a single pass over the output. There are different approaches to buffer all output such as: * Buffering on the char level, i.e. we'd have a char[] which would grow at approximately 80 characters a line. This would keep the output completely unstructured, but might be very easy to implement, such as redirecting all output to a temporary file and working off that. The later passes over the buffer are quite complicated though, because we have to parse back any output and then decide if it should be modified. * Buffer on a line level. As the output is mostly line oriented already, this would make sense, but it still is a bit awkward as we'd have to make sense of it again by looking at the first characters of a line to decide what part of a diff a line is. * Buffer semantically. Imagine there is a formal grammar for the diff output and we'd keep the symbols of this grammar around. This keeps the highest level of structure in the buffered data, such that the actual memory requirements are less than say the first option. Instead of buffering the characters of the line, we'll buffer what we intend to do plus additional information for the specifics. An output of diff --git a/new.txt b/new.txt index fa69b07..412428c 100644 Binary files a/new.txt and b/new.txt differ could be buffered as DIFF_SYMBOL_DIFF_START + new.txt DIFF_SYMBOL_INDEX_MODE + fa69b07 412428c "non-executable" flag DIFF_SYMBOL_BINARY_FILES + new.txt This and the following patches introduce the third option of buffering by first moving any output to emit_diff_symbol, and then introducing the buffering in this function. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:06:49 +08:00
DIFF_SYMBOL_SEPARATOR
};
/*
* Flags for content lines:
* 0..12 are whitespace rules
* 13-15 are WSEH_NEW | WSEH_OLD | WSEH_CONTEXT
* 16 is marking if the line is blank at EOF
*/
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
#define DIFF_SYMBOL_CONTENT_BLANK_LINE_EOF (1<<16)
#define DIFF_SYMBOL_MOVED_LINE (1<<17)
#define DIFF_SYMBOL_MOVED_LINE_ALT (1<<18)
#define DIFF_SYMBOL_MOVED_LINE_UNINTERESTING (1<<19)
#define DIFF_SYMBOL_CONTENT_WS_MASK (WSEH_NEW | WSEH_OLD | WSEH_CONTEXT | WS_RULE_MASK)
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
/*
* This struct is used when we need to buffer the output of the diff output.
*
* NEEDSWORK: Instead of storing a copy of the line, add an offset pointer
* into the pre/post image file. This pointer could be a union with the
* line pointer. By storing an offset into the file instead of the literal line,
* we can decrease the memory footprint for the buffered output. At first we
* may want to only have indirection for the content lines, but we could also
* enhance the state for emitting prefabricated lines, e.g. the similarity
* score line or hunk/file headers would only need to store a number or path
* and then the output can be constructed later on depending on state.
*/
struct emitted_diff_symbol {
const char *line;
int len;
int flags;
enum diff_symbol s;
};
#define EMITTED_DIFF_SYMBOL_INIT {NULL}
struct emitted_diff_symbols {
struct emitted_diff_symbol *buf;
int nr, alloc;
};
#define EMITTED_DIFF_SYMBOLS_INIT {NULL, 0, 0}
static void append_emitted_diff_symbol(struct diff_options *o,
struct emitted_diff_symbol *e)
{
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
struct emitted_diff_symbol *f;
ALLOC_GROW(o->emitted_symbols->buf,
o->emitted_symbols->nr + 1,
o->emitted_symbols->alloc);
f = &o->emitted_symbols->buf[o->emitted_symbols->nr++];
memcpy(f, e, sizeof(struct emitted_diff_symbol));
f->line = e->line ? xmemdupz(e->line, e->len) : NULL;
}
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
struct moved_entry {
struct hashmap_entry ent;
const struct emitted_diff_symbol *es;
struct moved_entry *next_line;
};
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
/**
* The struct ws_delta holds white space differences between moved lines, i.e.
* between '+' and '-' lines that have been detected to be a move.
* The string contains the difference in leading white spaces, before the
* rest of the line is compared using the white space config for move
* coloring. The current_longer indicates if the first string in the
* comparision is longer than the second.
*/
struct ws_delta {
char *string;
unsigned int current_longer : 1;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
};
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
#define WS_DELTA_INIT { NULL, 0 }
struct moved_block {
struct moved_entry *match;
struct ws_delta wsd;
};
static void moved_block_clear(struct moved_block *b)
{
FREE_AND_NULL(b->wsd.string);
b->match = NULL;
}
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
static int compute_ws_delta(const struct emitted_diff_symbol *a,
const struct emitted_diff_symbol *b,
struct ws_delta *out)
{
const struct emitted_diff_symbol *longer = a->len > b->len ? a : b;
const struct emitted_diff_symbol *shorter = a->len > b->len ? b : a;
int d = longer->len - shorter->len;
if (strncmp(longer->line + d, shorter->line, shorter->len))
return 0;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
out->string = xmemdupz(longer->line, d);
out->current_longer = (a == longer);
return 1;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
}
static int cmp_in_block_with_wsd(const struct diff_options *o,
const struct moved_entry *cur,
const struct moved_entry *match,
struct moved_block *pmb,
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
int n)
{
struct emitted_diff_symbol *l = &o->emitted_symbols->buf[n];
int al = cur->es->len, cl = l->len;
const char *a = cur->es->line,
*b = match->es->line,
*c = l->line;
int wslen;
/*
* We need to check if 'cur' is equal to 'match'.
* As those are from the same (+/-) side, we do not need to adjust for
* indent changes. However these were found using fuzzy matching
* so we do have to check if they are equal.
*/
if (strcmp(a, b))
return 1;
if (!pmb->wsd.string)
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
/*
* The white space delta is not active? This can happen
* when we exit early in this function.
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
*/
return 1;
/*
* The indent changes of the block are known and stored in
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
* pmb->wsd; however we need to check if the indent changes of the
* current line are still the same as before.
*
* To do so we need to compare 'l' to 'cur', adjusting the
* one of them for the white spaces, depending which was longer.
*/
wslen = strlen(pmb->wsd.string);
if (pmb->wsd.current_longer) {
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
c += wslen;
cl -= wslen;
} else {
a += wslen;
al -= wslen;
}
if (al != cl || memcmp(a, c, al))
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
return 1;
return 0;
}
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
static int moved_entry_cmp(const void *hashmap_cmp_fn_data,
const void *entry,
const void *entry_or_key,
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
const void *keydata)
{
const struct diff_options *diffopt = hashmap_cmp_fn_data;
const struct moved_entry *a = entry;
const struct moved_entry *b = entry_or_key;
diff.c: decouple white space treatment from move detection algorithm In the original implementation of the move detection logic the choice for ignoring white space changes is the same for the move detection as it is for the regular diff. Some cases came up where different treatment would have been nice. Allow the user to specify that white space should be ignored differently during detection of moved lines than during generation of added and removed lines. This is done by providing analogs to the --ignore-space-at-eol, -b, and -w options by introducing the option --color-moved-ws=<modes> with the modes named "ignore-space-at-eol", "ignore-space-change" and "ignore-all-space", which is used only during the move detection phase. As we change the default, we'll adjust the tests. For now we do not infer any options to treat white spaces in the move detection from the generic white space options given to diff. This can be tuned later to reasonable default. As we plan on adding more white space related options in a later patch, that interferes with the current white space options, use a flag field and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily check at parse time if we give invalid combinations and (b) can reuse parts of this patch. By having the white space treatment in its own option, we'll also make it easier for a later patch to have an config option for spaces in the move detection. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 07:05:40 +08:00
unsigned flags = diffopt->color_moved_ws_handling
& XDF_WHITESPACE_FLAGS;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
if (diffopt->color_moved_ws_handling &
COLOR_MOVED_WS_ALLOW_INDENTATION_CHANGE)
/*
* As there is not specific white space config given,
* we'd need to check for a new block, so ignore all
* white space. The setup of the white space
* configuration for the next block is done else where
*/
flags |= XDF_IGNORE_WHITESPACE;
return !xdiff_compare_lines(a->es->line, a->es->len,
b->es->line, b->es->len,
diff.c: decouple white space treatment from move detection algorithm In the original implementation of the move detection logic the choice for ignoring white space changes is the same for the move detection as it is for the regular diff. Some cases came up where different treatment would have been nice. Allow the user to specify that white space should be ignored differently during detection of moved lines than during generation of added and removed lines. This is done by providing analogs to the --ignore-space-at-eol, -b, and -w options by introducing the option --color-moved-ws=<modes> with the modes named "ignore-space-at-eol", "ignore-space-change" and "ignore-all-space", which is used only during the move detection phase. As we change the default, we'll adjust the tests. For now we do not infer any options to treat white spaces in the move detection from the generic white space options given to diff. This can be tuned later to reasonable default. As we plan on adding more white space related options in a later patch, that interferes with the current white space options, use a flag field and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily check at parse time if we give invalid combinations and (b) can reuse parts of this patch. By having the white space treatment in its own option, we'll also make it easier for a later patch to have an config option for spaces in the move detection. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 07:05:40 +08:00
flags);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
}
static struct moved_entry *prepare_entry(struct diff_options *o,
int line_no)
{
struct moved_entry *ret = xmalloc(sizeof(*ret));
struct emitted_diff_symbol *l = &o->emitted_symbols->buf[line_no];
diff.c: decouple white space treatment from move detection algorithm In the original implementation of the move detection logic the choice for ignoring white space changes is the same for the move detection as it is for the regular diff. Some cases came up where different treatment would have been nice. Allow the user to specify that white space should be ignored differently during detection of moved lines than during generation of added and removed lines. This is done by providing analogs to the --ignore-space-at-eol, -b, and -w options by introducing the option --color-moved-ws=<modes> with the modes named "ignore-space-at-eol", "ignore-space-change" and "ignore-all-space", which is used only during the move detection phase. As we change the default, we'll adjust the tests. For now we do not infer any options to treat white spaces in the move detection from the generic white space options given to diff. This can be tuned later to reasonable default. As we plan on adding more white space related options in a later patch, that interferes with the current white space options, use a flag field and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily check at parse time if we give invalid combinations and (b) can reuse parts of this patch. By having the white space treatment in its own option, we'll also make it easier for a later patch to have an config option for spaces in the move detection. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 07:05:40 +08:00
unsigned flags = o->color_moved_ws_handling & XDF_WHITESPACE_FLAGS;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
diff.c: decouple white space treatment from move detection algorithm In the original implementation of the move detection logic the choice for ignoring white space changes is the same for the move detection as it is for the regular diff. Some cases came up where different treatment would have been nice. Allow the user to specify that white space should be ignored differently during detection of moved lines than during generation of added and removed lines. This is done by providing analogs to the --ignore-space-at-eol, -b, and -w options by introducing the option --color-moved-ws=<modes> with the modes named "ignore-space-at-eol", "ignore-space-change" and "ignore-all-space", which is used only during the move detection phase. As we change the default, we'll adjust the tests. For now we do not infer any options to treat white spaces in the move detection from the generic white space options given to diff. This can be tuned later to reasonable default. As we plan on adding more white space related options in a later patch, that interferes with the current white space options, use a flag field and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily check at parse time if we give invalid combinations and (b) can reuse parts of this patch. By having the white space treatment in its own option, we'll also make it easier for a later patch to have an config option for spaces in the move detection. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 07:05:40 +08:00
ret->ent.hash = xdiff_hash_string(l->line, l->len, flags);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
ret->es = l;
ret->next_line = NULL;
return ret;
}
static void add_lines_to_move_detection(struct diff_options *o,
struct hashmap *add_lines,
struct hashmap *del_lines)
{
struct moved_entry *prev_line = NULL;
int n;
for (n = 0; n < o->emitted_symbols->nr; n++) {
struct hashmap *hm;
struct moved_entry *key;
switch (o->emitted_symbols->buf[n].s) {
case DIFF_SYMBOL_PLUS:
hm = add_lines;
break;
case DIFF_SYMBOL_MINUS:
hm = del_lines;
break;
default:
prev_line = NULL;
continue;
}
key = prepare_entry(o, n);
if (prev_line && prev_line->es->s == o->emitted_symbols->buf[n].s)
prev_line->next_line = key;
hashmap_add(hm, key);
prev_line = key;
}
}
static void pmb_advance_or_null(struct diff_options *o,
struct moved_entry *match,
struct hashmap *hm,
struct moved_block *pmb,
int pmb_nr)
{
int i;
for (i = 0; i < pmb_nr; i++) {
struct moved_entry *prev = pmb[i].match;
struct moved_entry *cur = (prev && prev->next_line) ?
prev->next_line : NULL;
if (cur && !hm->cmpfn(o, cur, match, NULL)) {
pmb[i].match = cur;
} else {
pmb[i].match = NULL;
}
}
}
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
static void pmb_advance_or_null_multi_match(struct diff_options *o,
struct moved_entry *match,
struct hashmap *hm,
struct moved_block *pmb,
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
int pmb_nr, int n)
{
int i;
char *got_match = xcalloc(1, pmb_nr);
for (; match; match = hashmap_get_next(hm, match)) {
for (i = 0; i < pmb_nr; i++) {
struct moved_entry *prev = pmb[i].match;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
struct moved_entry *cur = (prev && prev->next_line) ?
prev->next_line : NULL;
if (!cur)
continue;
if (!cmp_in_block_with_wsd(o, cur, match, &pmb[i], n))
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
got_match[i] |= 1;
}
}
for (i = 0; i < pmb_nr; i++) {
if (got_match[i]) {
/* Advance to the next line */
pmb[i].match = pmb[i].match->next_line;
} else {
moved_block_clear(&pmb[i]);
}
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
}
free(got_match);
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
}
static int shrink_potential_moved_blocks(struct moved_block *pmb,
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
int pmb_nr)
{
int lp, rp;
/* Shrink the set of potential block to the remaining running */
for (lp = 0, rp = pmb_nr - 1; lp <= rp;) {
while (lp < pmb_nr && pmb[lp].match)
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
lp++;
/* lp points at the first NULL now */
while (rp > -1 && !pmb[rp].match)
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
rp--;
/* rp points at the last non-NULL */
if (lp < pmb_nr && rp > -1 && lp < rp) {
pmb[lp] = pmb[rp];
pmb[rp].match = NULL;
pmb[rp].wsd.string = NULL;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
rp--;
lp++;
}
}
/* Remember the number of running sets */
return rp + 1;
}
/*
* If o->color_moved is COLOR_MOVED_PLAIN, this function does nothing.
*
* Otherwise, if the last block has fewer alphanumeric characters than
* COLOR_MOVED_MIN_ALNUM_COUNT, unset DIFF_SYMBOL_MOVED_LINE on all lines in
* that block.
*
* The last block consists of the (n - block_length)'th line up to but not
* including the nth line.
*
* NEEDSWORK: This uses the same heuristic as blame_entry_score() in blame.c.
* Think of a way to unify them.
*/
static void adjust_last_block(struct diff_options *o, int n, int block_length)
{
int i, alnum_count = 0;
if (o->color_moved == COLOR_MOVED_PLAIN)
return;
for (i = 1; i < block_length + 1; i++) {
const char *c = o->emitted_symbols->buf[n - i].line;
for (; *c; c++) {
if (!isalnum(*c))
continue;
alnum_count++;
if (alnum_count >= COLOR_MOVED_MIN_ALNUM_COUNT)
return;
}
}
for (i = 1; i < block_length + 1; i++)
o->emitted_symbols->buf[n - i].flags &= ~DIFF_SYMBOL_MOVED_LINE;
}
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
/* Find blocks of moved code, delegate actual coloring decision to helper */
static void mark_color_as_moved(struct diff_options *o,
struct hashmap *add_lines,
struct hashmap *del_lines)
{
struct moved_block *pmb = NULL; /* potentially moved blocks */
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
int pmb_nr = 0, pmb_alloc = 0;
int n, flipped_block = 1, block_length = 0;
for (n = 0; n < o->emitted_symbols->nr; n++) {
struct hashmap *hm = NULL;
struct moved_entry *key;
struct moved_entry *match = NULL;
struct emitted_diff_symbol *l = &o->emitted_symbols->buf[n];
switch (l->s) {
case DIFF_SYMBOL_PLUS:
hm = del_lines;
key = prepare_entry(o, n);
match = hashmap_get(hm, key, NULL);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
free(key);
break;
case DIFF_SYMBOL_MINUS:
hm = add_lines;
key = prepare_entry(o, n);
match = hashmap_get(hm, key, NULL);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
free(key);
break;
default:
flipped_block = 1;
}
if (!match) {
int i;
adjust_last_block(o, n, block_length);
for(i = 0; i < pmb_nr; i++)
moved_block_clear(&pmb[i]);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
pmb_nr = 0;
block_length = 0;
continue;
}
l->flags |= DIFF_SYMBOL_MOVED_LINE;
if (o->color_moved == COLOR_MOVED_PLAIN)
continue;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
if (o->color_moved_ws_handling &
COLOR_MOVED_WS_ALLOW_INDENTATION_CHANGE)
pmb_advance_or_null_multi_match(o, match, hm, pmb, pmb_nr, n);
else
pmb_advance_or_null(o, match, hm, pmb, pmb_nr);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
pmb_nr = shrink_potential_moved_blocks(pmb, pmb_nr);
if (pmb_nr == 0) {
/*
* The current line is the start of a new block.
* Setup the set of potential blocks.
*/
for (; match; match = hashmap_get_next(hm, match)) {
ALLOC_GROW(pmb, pmb_nr + 1, pmb_alloc);
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
if (o->color_moved_ws_handling &
COLOR_MOVED_WS_ALLOW_INDENTATION_CHANGE) {
if (compute_ws_delta(l, match->es,
&pmb[pmb_nr].wsd))
pmb[pmb_nr++].match = match;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
} else {
pmb[pmb_nr].wsd.string = NULL;
pmb[pmb_nr++].match = match;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
}
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
}
flipped_block = (flipped_block + 1) % 2;
adjust_last_block(o, n, block_length);
block_length = 0;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
}
block_length++;
if (flipped_block && o->color_moved != COLOR_MOVED_BLOCKS)
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
l->flags |= DIFF_SYMBOL_MOVED_LINE_ALT;
}
adjust_last_block(o, n, block_length);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
for(n = 0; n < pmb_nr; n++)
moved_block_clear(&pmb[n]);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
free(pmb);
}
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
#define DIFF_SYMBOL_MOVED_LINE_ZEBRA_MASK \
(DIFF_SYMBOL_MOVED_LINE | DIFF_SYMBOL_MOVED_LINE_ALT)
static void dim_moved_lines(struct diff_options *o)
{
int n;
for (n = 0; n < o->emitted_symbols->nr; n++) {
struct emitted_diff_symbol *prev = (n != 0) ?
&o->emitted_symbols->buf[n - 1] : NULL;
struct emitted_diff_symbol *l = &o->emitted_symbols->buf[n];
struct emitted_diff_symbol *next =
(n < o->emitted_symbols->nr - 1) ?
&o->emitted_symbols->buf[n + 1] : NULL;
/* Not a plus or minus line? */
if (l->s != DIFF_SYMBOL_PLUS && l->s != DIFF_SYMBOL_MINUS)
continue;
/* Not a moved line? */
if (!(l->flags & DIFF_SYMBOL_MOVED_LINE))
continue;
/*
* If prev or next are not a plus or minus line,
* pretend they don't exist
*/
if (prev && prev->s != DIFF_SYMBOL_PLUS &&
prev->s != DIFF_SYMBOL_MINUS)
prev = NULL;
if (next && next->s != DIFF_SYMBOL_PLUS &&
next->s != DIFF_SYMBOL_MINUS)
next = NULL;
/* Inside a block? */
if ((prev &&
(prev->flags & DIFF_SYMBOL_MOVED_LINE_ZEBRA_MASK) ==
(l->flags & DIFF_SYMBOL_MOVED_LINE_ZEBRA_MASK)) &&
(next &&
(next->flags & DIFF_SYMBOL_MOVED_LINE_ZEBRA_MASK) ==
(l->flags & DIFF_SYMBOL_MOVED_LINE_ZEBRA_MASK))) {
l->flags |= DIFF_SYMBOL_MOVED_LINE_UNINTERESTING;
continue;
}
/* Check if we are at an interesting bound: */
if (prev && (prev->flags & DIFF_SYMBOL_MOVED_LINE) &&
(prev->flags & DIFF_SYMBOL_MOVED_LINE_ALT) !=
(l->flags & DIFF_SYMBOL_MOVED_LINE_ALT))
continue;
if (next && (next->flags & DIFF_SYMBOL_MOVED_LINE) &&
(next->flags & DIFF_SYMBOL_MOVED_LINE_ALT) !=
(l->flags & DIFF_SYMBOL_MOVED_LINE_ALT))
continue;
/*
* The boundary to prev and next are not interesting,
* so this line is not interesting as a whole
*/
l->flags |= DIFF_SYMBOL_MOVED_LINE_UNINTERESTING;
}
}
static void emit_line_ws_markup(struct diff_options *o,
const char *set_sign, const char *set,
const char *reset,
int sign_index, const char *line, int len,
unsigned ws_rule, int blank_at_eof)
{
const char *ws = NULL;
int sign = o->output_indicators[sign_index];
if (o->ws_error_highlight & ws_rule) {
ws = diff_get_color_opt(o, DIFF_WHITESPACE);
if (!*ws)
ws = NULL;
}
if (!ws && !set_sign)
emit_line_0(o, set, NULL, 0, reset, sign, line, len);
else if (!ws) {
emit_line_0(o, set_sign, set, !!set_sign, reset, sign, line, len);
} else if (blank_at_eof)
/* Blank line at EOF - paint '+' as well */
emit_line_0(o, ws, NULL, 0, reset, sign, line, len);
else {
/* Emit just the prefix, then the rest. */
emit_line_0(o, set_sign ? set_sign : set, NULL, !!set_sign, reset,
sign, "", 0);
ws_check_emit(line, len, ws_rule,
o->file, set, reset, ws);
}
}
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
static void emit_diff_symbol_from_struct(struct diff_options *o,
struct emitted_diff_symbol *eds)
diff.c: introduce emit_diff_symbol In a later patch we want to buffer all output before emitting it as a new feature ("markup moved lines") conceptually cannot be implemented in a single pass over the output. There are different approaches to buffer all output such as: * Buffering on the char level, i.e. we'd have a char[] which would grow at approximately 80 characters a line. This would keep the output completely unstructured, but might be very easy to implement, such as redirecting all output to a temporary file and working off that. The later passes over the buffer are quite complicated though, because we have to parse back any output and then decide if it should be modified. * Buffer on a line level. As the output is mostly line oriented already, this would make sense, but it still is a bit awkward as we'd have to make sense of it again by looking at the first characters of a line to decide what part of a diff a line is. * Buffer semantically. Imagine there is a formal grammar for the diff output and we'd keep the symbols of this grammar around. This keeps the highest level of structure in the buffered data, such that the actual memory requirements are less than say the first option. Instead of buffering the characters of the line, we'll buffer what we intend to do plus additional information for the specifics. An output of diff --git a/new.txt b/new.txt index fa69b07..412428c 100644 Binary files a/new.txt and b/new.txt differ could be buffered as DIFF_SYMBOL_DIFF_START + new.txt DIFF_SYMBOL_INDEX_MODE + fa69b07 412428c "non-executable" flag DIFF_SYMBOL_BINARY_FILES + new.txt This and the following patches introduce the third option of buffering by first moving any output to emit_diff_symbol, and then introducing the buffering in this function. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:06:49 +08:00
{
static const char *nneof = " No newline at end of file\n";
const char *context, *reset, *set, *set_sign, *meta, *fraginfo;
struct strbuf sb = STRBUF_INIT;
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
enum diff_symbol s = eds->s;
const char *line = eds->line;
int len = eds->len;
unsigned flags = eds->flags;
diff.c: introduce emit_diff_symbol In a later patch we want to buffer all output before emitting it as a new feature ("markup moved lines") conceptually cannot be implemented in a single pass over the output. There are different approaches to buffer all output such as: * Buffering on the char level, i.e. we'd have a char[] which would grow at approximately 80 characters a line. This would keep the output completely unstructured, but might be very easy to implement, such as redirecting all output to a temporary file and working off that. The later passes over the buffer are quite complicated though, because we have to parse back any output and then decide if it should be modified. * Buffer on a line level. As the output is mostly line oriented already, this would make sense, but it still is a bit awkward as we'd have to make sense of it again by looking at the first characters of a line to decide what part of a diff a line is. * Buffer semantically. Imagine there is a formal grammar for the diff output and we'd keep the symbols of this grammar around. This keeps the highest level of structure in the buffered data, such that the actual memory requirements are less than say the first option. Instead of buffering the characters of the line, we'll buffer what we intend to do plus additional information for the specifics. An output of diff --git a/new.txt b/new.txt index fa69b07..412428c 100644 Binary files a/new.txt and b/new.txt differ could be buffered as DIFF_SYMBOL_DIFF_START + new.txt DIFF_SYMBOL_INDEX_MODE + fa69b07 412428c "non-executable" flag DIFF_SYMBOL_BINARY_FILES + new.txt This and the following patches introduce the third option of buffering by first moving any output to emit_diff_symbol, and then introducing the buffering in this function. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:06:49 +08:00
switch (s) {
case DIFF_SYMBOL_NO_LF_EOF:
context = diff_get_color_opt(o, DIFF_CONTEXT);
reset = diff_get_color_opt(o, DIFF_RESET);
putc('\n', o->file);
emit_line_0(o, context, NULL, 0, reset, '\\',
nneof, strlen(nneof));
break;
case DIFF_SYMBOL_SUBMODULE_HEADER:
case DIFF_SYMBOL_SUBMODULE_ERROR:
case DIFF_SYMBOL_SUBMODULE_PIPETHROUGH:
case DIFF_SYMBOL_STATS_SUMMARY_INSERTS_DELETES:
case DIFF_SYMBOL_SUMMARY:
case DIFF_SYMBOL_STATS_LINE:
case DIFF_SYMBOL_BINARY_DIFF_BODY:
case DIFF_SYMBOL_CONTEXT_FRAGINFO:
emit_line(o, "", "", line, len);
break;
case DIFF_SYMBOL_CONTEXT_INCOMPLETE:
case DIFF_SYMBOL_CONTEXT_MARKER:
context = diff_get_color_opt(o, DIFF_CONTEXT);
reset = diff_get_color_opt(o, DIFF_RESET);
emit_line(o, context, reset, line, len);
break;
diff.c: introduce emit_diff_symbol In a later patch we want to buffer all output before emitting it as a new feature ("markup moved lines") conceptually cannot be implemented in a single pass over the output. There are different approaches to buffer all output such as: * Buffering on the char level, i.e. we'd have a char[] which would grow at approximately 80 characters a line. This would keep the output completely unstructured, but might be very easy to implement, such as redirecting all output to a temporary file and working off that. The later passes over the buffer are quite complicated though, because we have to parse back any output and then decide if it should be modified. * Buffer on a line level. As the output is mostly line oriented already, this would make sense, but it still is a bit awkward as we'd have to make sense of it again by looking at the first characters of a line to decide what part of a diff a line is. * Buffer semantically. Imagine there is a formal grammar for the diff output and we'd keep the symbols of this grammar around. This keeps the highest level of structure in the buffered data, such that the actual memory requirements are less than say the first option. Instead of buffering the characters of the line, we'll buffer what we intend to do plus additional information for the specifics. An output of diff --git a/new.txt b/new.txt index fa69b07..412428c 100644 Binary files a/new.txt and b/new.txt differ could be buffered as DIFF_SYMBOL_DIFF_START + new.txt DIFF_SYMBOL_INDEX_MODE + fa69b07 412428c "non-executable" flag DIFF_SYMBOL_BINARY_FILES + new.txt This and the following patches introduce the third option of buffering by first moving any output to emit_diff_symbol, and then introducing the buffering in this function. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:06:49 +08:00
case DIFF_SYMBOL_SEPARATOR:
fprintf(o->file, "%s%c",
diff_line_prefix(o),
o->line_termination);
break;
case DIFF_SYMBOL_CONTEXT:
set = diff_get_color_opt(o, DIFF_CONTEXT);
reset = diff_get_color_opt(o, DIFF_RESET);
set_sign = NULL;
if (o->flags.dual_color_diffed_diffs) {
char c = !len ? 0 : line[0];
if (c == '+')
set = diff_get_color_opt(o, DIFF_FILE_NEW);
else if (c == '@')
set = diff_get_color_opt(o, DIFF_FRAGINFO);
else if (c == '-')
set = diff_get_color_opt(o, DIFF_FILE_OLD);
}
emit_line_ws_markup(o, set_sign, set, reset,
OUTPUT_INDICATOR_CONTEXT, line, len,
flags & (DIFF_SYMBOL_CONTENT_WS_MASK), 0);
break;
case DIFF_SYMBOL_PLUS:
switch (flags & (DIFF_SYMBOL_MOVED_LINE |
DIFF_SYMBOL_MOVED_LINE_ALT |
DIFF_SYMBOL_MOVED_LINE_UNINTERESTING)) {
case DIFF_SYMBOL_MOVED_LINE |
DIFF_SYMBOL_MOVED_LINE_ALT |
DIFF_SYMBOL_MOVED_LINE_UNINTERESTING:
set = diff_get_color_opt(o, DIFF_FILE_NEW_MOVED_ALT_DIM);
break;
case DIFF_SYMBOL_MOVED_LINE |
DIFF_SYMBOL_MOVED_LINE_ALT:
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
set = diff_get_color_opt(o, DIFF_FILE_NEW_MOVED_ALT);
break;
case DIFF_SYMBOL_MOVED_LINE |
DIFF_SYMBOL_MOVED_LINE_UNINTERESTING:
set = diff_get_color_opt(o, DIFF_FILE_NEW_MOVED_DIM);
break;
case DIFF_SYMBOL_MOVED_LINE:
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
set = diff_get_color_opt(o, DIFF_FILE_NEW_MOVED);
break;
default:
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
set = diff_get_color_opt(o, DIFF_FILE_NEW);
}
reset = diff_get_color_opt(o, DIFF_RESET);
if (!o->flags.dual_color_diffed_diffs)
set_sign = NULL;
else {
char c = !len ? 0 : line[0];
set_sign = set;
if (c == '-')
range-diff: use dim/bold cues to improve dual color mode It *is* a confusing thing to look at a diff of diffs. All too easy is it to mix up whether the -/+ markers refer to the "inner" or the "outer" diff, i.e. whether a `+` indicates that a line was added by either the old or the new diff (or both), or whether the new diff does something different than the old diff. To make things easier to process for normal developers, we introduced the dual color mode which colors the lines according to the commit diff, i.e. lines that are added by a commit (whether old, new, or both) are colored in green. In non-dual color mode, the lines would be colored according to the outer diff: if the old commit added a line, it would be colored red (because that line addition is only present in the first commit range that was specified on the command-line, i.e. the "old" commit, but not in the second commit range, i.e. the "new" commit). However, this dual color mode is still not making things clear enough, as we are looking at two levels of diffs, and we still only pick a color according to *one* of them (the outer diff marker is colored differently, of course, but in particular with deep indentation, it is easy to lose track of that outer diff marker's background color). Therefore, let's add another dimension to the mix. Still use green/red/normal according to the commit diffs, but now also dim the lines that were only in the old commit, and use bold face for the lines that are only in the new commit. That way, it is much easier not to lose track of, say, when we are looking at a line that was added in the previous iteration of a patch series but the new iteration adds a slightly different version: the obsolete change will be dimmed, the current version of the patch will be bold. At least this developer has a much easier time reading the range-diffs that way. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 19:33:32 +08:00
set = diff_get_color_opt(o, DIFF_FILE_OLD_BOLD);
else if (c == '@')
set = diff_get_color_opt(o, DIFF_FRAGINFO);
range-diff: use dim/bold cues to improve dual color mode It *is* a confusing thing to look at a diff of diffs. All too easy is it to mix up whether the -/+ markers refer to the "inner" or the "outer" diff, i.e. whether a `+` indicates that a line was added by either the old or the new diff (or both), or whether the new diff does something different than the old diff. To make things easier to process for normal developers, we introduced the dual color mode which colors the lines according to the commit diff, i.e. lines that are added by a commit (whether old, new, or both) are colored in green. In non-dual color mode, the lines would be colored according to the outer diff: if the old commit added a line, it would be colored red (because that line addition is only present in the first commit range that was specified on the command-line, i.e. the "old" commit, but not in the second commit range, i.e. the "new" commit). However, this dual color mode is still not making things clear enough, as we are looking at two levels of diffs, and we still only pick a color according to *one* of them (the outer diff marker is colored differently, of course, but in particular with deep indentation, it is easy to lose track of that outer diff marker's background color). Therefore, let's add another dimension to the mix. Still use green/red/normal according to the commit diffs, but now also dim the lines that were only in the old commit, and use bold face for the lines that are only in the new commit. That way, it is much easier not to lose track of, say, when we are looking at a line that was added in the previous iteration of a patch series but the new iteration adds a slightly different version: the obsolete change will be dimmed, the current version of the patch will be bold. At least this developer has a much easier time reading the range-diffs that way. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 19:33:32 +08:00
else if (c == '+')
set = diff_get_color_opt(o, DIFF_FILE_NEW_BOLD);
else
set = diff_get_color_opt(o, DIFF_CONTEXT_BOLD);
flags &= ~DIFF_SYMBOL_CONTENT_WS_MASK;
}
emit_line_ws_markup(o, set_sign, set, reset,
OUTPUT_INDICATOR_NEW, line, len,
flags & DIFF_SYMBOL_CONTENT_WS_MASK,
flags & DIFF_SYMBOL_CONTENT_BLANK_LINE_EOF);
break;
case DIFF_SYMBOL_MINUS:
switch (flags & (DIFF_SYMBOL_MOVED_LINE |
DIFF_SYMBOL_MOVED_LINE_ALT |
DIFF_SYMBOL_MOVED_LINE_UNINTERESTING)) {
case DIFF_SYMBOL_MOVED_LINE |
DIFF_SYMBOL_MOVED_LINE_ALT |
DIFF_SYMBOL_MOVED_LINE_UNINTERESTING:
set = diff_get_color_opt(o, DIFF_FILE_OLD_MOVED_ALT_DIM);
break;
case DIFF_SYMBOL_MOVED_LINE |
DIFF_SYMBOL_MOVED_LINE_ALT:
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
set = diff_get_color_opt(o, DIFF_FILE_OLD_MOVED_ALT);
break;
case DIFF_SYMBOL_MOVED_LINE |
DIFF_SYMBOL_MOVED_LINE_UNINTERESTING:
set = diff_get_color_opt(o, DIFF_FILE_OLD_MOVED_DIM);
break;
case DIFF_SYMBOL_MOVED_LINE:
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
set = diff_get_color_opt(o, DIFF_FILE_OLD_MOVED);
break;
default:
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
set = diff_get_color_opt(o, DIFF_FILE_OLD);
}
reset = diff_get_color_opt(o, DIFF_RESET);
if (!o->flags.dual_color_diffed_diffs)
set_sign = NULL;
else {
char c = !len ? 0 : line[0];
set_sign = set;
if (c == '+')
range-diff: use dim/bold cues to improve dual color mode It *is* a confusing thing to look at a diff of diffs. All too easy is it to mix up whether the -/+ markers refer to the "inner" or the "outer" diff, i.e. whether a `+` indicates that a line was added by either the old or the new diff (or both), or whether the new diff does something different than the old diff. To make things easier to process for normal developers, we introduced the dual color mode which colors the lines according to the commit diff, i.e. lines that are added by a commit (whether old, new, or both) are colored in green. In non-dual color mode, the lines would be colored according to the outer diff: if the old commit added a line, it would be colored red (because that line addition is only present in the first commit range that was specified on the command-line, i.e. the "old" commit, but not in the second commit range, i.e. the "new" commit). However, this dual color mode is still not making things clear enough, as we are looking at two levels of diffs, and we still only pick a color according to *one* of them (the outer diff marker is colored differently, of course, but in particular with deep indentation, it is easy to lose track of that outer diff marker's background color). Therefore, let's add another dimension to the mix. Still use green/red/normal according to the commit diffs, but now also dim the lines that were only in the old commit, and use bold face for the lines that are only in the new commit. That way, it is much easier not to lose track of, say, when we are looking at a line that was added in the previous iteration of a patch series but the new iteration adds a slightly different version: the obsolete change will be dimmed, the current version of the patch will be bold. At least this developer has a much easier time reading the range-diffs that way. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 19:33:32 +08:00
set = diff_get_color_opt(o, DIFF_FILE_NEW_DIM);
else if (c == '@')
set = diff_get_color_opt(o, DIFF_FRAGINFO);
range-diff: use dim/bold cues to improve dual color mode It *is* a confusing thing to look at a diff of diffs. All too easy is it to mix up whether the -/+ markers refer to the "inner" or the "outer" diff, i.e. whether a `+` indicates that a line was added by either the old or the new diff (or both), or whether the new diff does something different than the old diff. To make things easier to process for normal developers, we introduced the dual color mode which colors the lines according to the commit diff, i.e. lines that are added by a commit (whether old, new, or both) are colored in green. In non-dual color mode, the lines would be colored according to the outer diff: if the old commit added a line, it would be colored red (because that line addition is only present in the first commit range that was specified on the command-line, i.e. the "old" commit, but not in the second commit range, i.e. the "new" commit). However, this dual color mode is still not making things clear enough, as we are looking at two levels of diffs, and we still only pick a color according to *one* of them (the outer diff marker is colored differently, of course, but in particular with deep indentation, it is easy to lose track of that outer diff marker's background color). Therefore, let's add another dimension to the mix. Still use green/red/normal according to the commit diffs, but now also dim the lines that were only in the old commit, and use bold face for the lines that are only in the new commit. That way, it is much easier not to lose track of, say, when we are looking at a line that was added in the previous iteration of a patch series but the new iteration adds a slightly different version: the obsolete change will be dimmed, the current version of the patch will be bold. At least this developer has a much easier time reading the range-diffs that way. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 19:33:32 +08:00
else if (c == '-')
set = diff_get_color_opt(o, DIFF_FILE_OLD_DIM);
else
set = diff_get_color_opt(o, DIFF_CONTEXT_DIM);
}
emit_line_ws_markup(o, set_sign, set, reset,
OUTPUT_INDICATOR_OLD, line, len,
flags & DIFF_SYMBOL_CONTENT_WS_MASK, 0);
break;
case DIFF_SYMBOL_WORDS_PORCELAIN:
context = diff_get_color_opt(o, DIFF_CONTEXT);
reset = diff_get_color_opt(o, DIFF_RESET);
emit_line(o, context, reset, line, len);
fputs("~\n", o->file);
break;
case DIFF_SYMBOL_WORDS:
context = diff_get_color_opt(o, DIFF_CONTEXT);
reset = diff_get_color_opt(o, DIFF_RESET);
/*
* Skip the prefix character, if any. With
* diff_suppress_blank_empty, there may be
* none.
*/
if (line[0] != '\n') {
line++;
len--;
}
emit_line(o, context, reset, line, len);
break;
case DIFF_SYMBOL_FILEPAIR_PLUS:
meta = diff_get_color_opt(o, DIFF_METAINFO);
reset = diff_get_color_opt(o, DIFF_RESET);
fprintf(o->file, "%s%s+++ %s%s%s\n", diff_line_prefix(o), meta,
line, reset,
strchr(line, ' ') ? "\t" : "");
break;
case DIFF_SYMBOL_FILEPAIR_MINUS:
meta = diff_get_color_opt(o, DIFF_METAINFO);
reset = diff_get_color_opt(o, DIFF_RESET);
fprintf(o->file, "%s%s--- %s%s%s\n", diff_line_prefix(o), meta,
line, reset,
strchr(line, ' ') ? "\t" : "");
break;
case DIFF_SYMBOL_BINARY_FILES:
case DIFF_SYMBOL_HEADER:
fprintf(o->file, "%s", line);
break;
case DIFF_SYMBOL_BINARY_DIFF_HEADER:
fprintf(o->file, "%sGIT binary patch\n", diff_line_prefix(o));
break;
case DIFF_SYMBOL_BINARY_DIFF_HEADER_DELTA:
fprintf(o->file, "%sdelta %s\n", diff_line_prefix(o), line);
break;
case DIFF_SYMBOL_BINARY_DIFF_HEADER_LITERAL:
fprintf(o->file, "%sliteral %s\n", diff_line_prefix(o), line);
break;
case DIFF_SYMBOL_BINARY_DIFF_FOOTER:
fputs(diff_line_prefix(o), o->file);
fputc('\n', o->file);
break;
case DIFF_SYMBOL_REWRITE_DIFF:
fraginfo = diff_get_color(o->use_color, DIFF_FRAGINFO);
reset = diff_get_color_opt(o, DIFF_RESET);
emit_line(o, fraginfo, reset, line, len);
break;
case DIFF_SYMBOL_SUBMODULE_ADD:
set = diff_get_color_opt(o, DIFF_FILE_NEW);
reset = diff_get_color_opt(o, DIFF_RESET);
emit_line(o, set, reset, line, len);
break;
case DIFF_SYMBOL_SUBMODULE_DEL:
set = diff_get_color_opt(o, DIFF_FILE_OLD);
reset = diff_get_color_opt(o, DIFF_RESET);
emit_line(o, set, reset, line, len);
break;
case DIFF_SYMBOL_SUBMODULE_UNTRACKED:
fprintf(o->file, "%sSubmodule %s contains untracked content\n",
diff_line_prefix(o), line);
break;
case DIFF_SYMBOL_SUBMODULE_MODIFIED:
fprintf(o->file, "%sSubmodule %s contains modified content\n",
diff_line_prefix(o), line);
break;
case DIFF_SYMBOL_STATS_SUMMARY_NO_FILES:
emit_line(o, "", "", " 0 files changed\n",
strlen(" 0 files changed\n"));
break;
case DIFF_SYMBOL_STATS_SUMMARY_ABBREV:
emit_line(o, "", "", " ...\n", strlen(" ...\n"));
break;
case DIFF_SYMBOL_WORD_DIFF:
fprintf(o->file, "%.*s", len, line);
break;
case DIFF_SYMBOL_STAT_SEP:
fputs(o->stat_sep, o->file);
break;
diff.c: introduce emit_diff_symbol In a later patch we want to buffer all output before emitting it as a new feature ("markup moved lines") conceptually cannot be implemented in a single pass over the output. There are different approaches to buffer all output such as: * Buffering on the char level, i.e. we'd have a char[] which would grow at approximately 80 characters a line. This would keep the output completely unstructured, but might be very easy to implement, such as redirecting all output to a temporary file and working off that. The later passes over the buffer are quite complicated though, because we have to parse back any output and then decide if it should be modified. * Buffer on a line level. As the output is mostly line oriented already, this would make sense, but it still is a bit awkward as we'd have to make sense of it again by looking at the first characters of a line to decide what part of a diff a line is. * Buffer semantically. Imagine there is a formal grammar for the diff output and we'd keep the symbols of this grammar around. This keeps the highest level of structure in the buffered data, such that the actual memory requirements are less than say the first option. Instead of buffering the characters of the line, we'll buffer what we intend to do plus additional information for the specifics. An output of diff --git a/new.txt b/new.txt index fa69b07..412428c 100644 Binary files a/new.txt and b/new.txt differ could be buffered as DIFF_SYMBOL_DIFF_START + new.txt DIFF_SYMBOL_INDEX_MODE + fa69b07 412428c "non-executable" flag DIFF_SYMBOL_BINARY_FILES + new.txt This and the following patches introduce the third option of buffering by first moving any output to emit_diff_symbol, and then introducing the buffering in this function. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:06:49 +08:00
default:
BUG("unknown diff symbol");
diff.c: introduce emit_diff_symbol In a later patch we want to buffer all output before emitting it as a new feature ("markup moved lines") conceptually cannot be implemented in a single pass over the output. There are different approaches to buffer all output such as: * Buffering on the char level, i.e. we'd have a char[] which would grow at approximately 80 characters a line. This would keep the output completely unstructured, but might be very easy to implement, such as redirecting all output to a temporary file and working off that. The later passes over the buffer are quite complicated though, because we have to parse back any output and then decide if it should be modified. * Buffer on a line level. As the output is mostly line oriented already, this would make sense, but it still is a bit awkward as we'd have to make sense of it again by looking at the first characters of a line to decide what part of a diff a line is. * Buffer semantically. Imagine there is a formal grammar for the diff output and we'd keep the symbols of this grammar around. This keeps the highest level of structure in the buffered data, such that the actual memory requirements are less than say the first option. Instead of buffering the characters of the line, we'll buffer what we intend to do plus additional information for the specifics. An output of diff --git a/new.txt b/new.txt index fa69b07..412428c 100644 Binary files a/new.txt and b/new.txt differ could be buffered as DIFF_SYMBOL_DIFF_START + new.txt DIFF_SYMBOL_INDEX_MODE + fa69b07 412428c "non-executable" flag DIFF_SYMBOL_BINARY_FILES + new.txt This and the following patches introduce the third option of buffering by first moving any output to emit_diff_symbol, and then introducing the buffering in this function. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:06:49 +08:00
}
strbuf_release(&sb);
diff.c: introduce emit_diff_symbol In a later patch we want to buffer all output before emitting it as a new feature ("markup moved lines") conceptually cannot be implemented in a single pass over the output. There are different approaches to buffer all output such as: * Buffering on the char level, i.e. we'd have a char[] which would grow at approximately 80 characters a line. This would keep the output completely unstructured, but might be very easy to implement, such as redirecting all output to a temporary file and working off that. The later passes over the buffer are quite complicated though, because we have to parse back any output and then decide if it should be modified. * Buffer on a line level. As the output is mostly line oriented already, this would make sense, but it still is a bit awkward as we'd have to make sense of it again by looking at the first characters of a line to decide what part of a diff a line is. * Buffer semantically. Imagine there is a formal grammar for the diff output and we'd keep the symbols of this grammar around. This keeps the highest level of structure in the buffered data, such that the actual memory requirements are less than say the first option. Instead of buffering the characters of the line, we'll buffer what we intend to do plus additional information for the specifics. An output of diff --git a/new.txt b/new.txt index fa69b07..412428c 100644 Binary files a/new.txt and b/new.txt differ could be buffered as DIFF_SYMBOL_DIFF_START + new.txt DIFF_SYMBOL_INDEX_MODE + fa69b07 412428c "non-executable" flag DIFF_SYMBOL_BINARY_FILES + new.txt This and the following patches introduce the third option of buffering by first moving any output to emit_diff_symbol, and then introducing the buffering in this function. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:06:49 +08:00
}
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
static void emit_diff_symbol(struct diff_options *o, enum diff_symbol s,
const char *line, int len, unsigned flags)
{
struct emitted_diff_symbol e = {line, len, flags, s};
if (o->emitted_symbols)
append_emitted_diff_symbol(o, &e);
else
emit_diff_symbol_from_struct(o, &e);
}
void diff_emit_submodule_del(struct diff_options *o, const char *line)
{
emit_diff_symbol(o, DIFF_SYMBOL_SUBMODULE_DEL, line, strlen(line), 0);
}
void diff_emit_submodule_add(struct diff_options *o, const char *line)
{
emit_diff_symbol(o, DIFF_SYMBOL_SUBMODULE_ADD, line, strlen(line), 0);
}
void diff_emit_submodule_untracked(struct diff_options *o, const char *path)
{
emit_diff_symbol(o, DIFF_SYMBOL_SUBMODULE_UNTRACKED,
path, strlen(path), 0);
}
void diff_emit_submodule_modified(struct diff_options *o, const char *path)
{
emit_diff_symbol(o, DIFF_SYMBOL_SUBMODULE_MODIFIED,
path, strlen(path), 0);
}
void diff_emit_submodule_header(struct diff_options *o, const char *header)
{
emit_diff_symbol(o, DIFF_SYMBOL_SUBMODULE_HEADER,
header, strlen(header), 0);
}
void diff_emit_submodule_error(struct diff_options *o, const char *err)
{
emit_diff_symbol(o, DIFF_SYMBOL_SUBMODULE_ERROR, err, strlen(err), 0);
}
void diff_emit_submodule_pipethrough(struct diff_options *o,
const char *line, int len)
{
emit_diff_symbol(o, DIFF_SYMBOL_SUBMODULE_PIPETHROUGH, line, len, 0);
}
static int new_blank_line_at_eof(struct emit_callback *ecbdata, const char *line, int len)
{
if (!((ecbdata->ws_rule & WS_BLANK_AT_EOF) &&
ecbdata->blank_at_eof_in_preimage &&
ecbdata->blank_at_eof_in_postimage &&
ecbdata->blank_at_eof_in_preimage <= ecbdata->lno_in_preimage &&
ecbdata->blank_at_eof_in_postimage <= ecbdata->lno_in_postimage))
return 0;
return ws_blank_line(line, len, ecbdata->ws_rule);
}
static void emit_add_line(const char *reset,
struct emit_callback *ecbdata,
const char *line, int len)
{
unsigned flags = WSEH_NEW | ecbdata->ws_rule;
if (new_blank_line_at_eof(ecbdata, line, len))
flags |= DIFF_SYMBOL_CONTENT_BLANK_LINE_EOF;
emit_diff_symbol(ecbdata->opt, DIFF_SYMBOL_PLUS, line, len, flags);
}
static void emit_del_line(const char *reset,
struct emit_callback *ecbdata,
const char *line, int len)
{
unsigned flags = WSEH_OLD | ecbdata->ws_rule;
emit_diff_symbol(ecbdata->opt, DIFF_SYMBOL_MINUS, line, len, flags);
}
static void emit_context_line(const char *reset,
struct emit_callback *ecbdata,
const char *line, int len)
{
unsigned flags = WSEH_CONTEXT | ecbdata->ws_rule;
emit_diff_symbol(ecbdata->opt, DIFF_SYMBOL_CONTEXT, line, len, flags);
}
static void emit_hunk_header(struct emit_callback *ecbdata,
const char *line, int len)
{
const char *context = diff_get_color(ecbdata->color_diff, DIFF_CONTEXT);
const char *frag = diff_get_color(ecbdata->color_diff, DIFF_FRAGINFO);
const char *func = diff_get_color(ecbdata->color_diff, DIFF_FUNCINFO);
const char *reset = diff_get_color(ecbdata->color_diff, DIFF_RESET);
const char *reverse = ecbdata->color_diff ? GIT_COLOR_REVERSE : "";
static const char atat[2] = { '@', '@' };
const char *cp, *ep;
struct strbuf msgbuf = STRBUF_INIT;
int org_len = len;
int i = 1;
/*
* As a hunk header must begin with "@@ -<old>, +<new> @@",
* it always is at least 10 bytes long.
*/
if (len < 10 ||
memcmp(line, atat, 2) ||
!(ep = memmem(line + 2, len - 2, atat, 2))) {
emit_diff_symbol(ecbdata->opt,
DIFF_SYMBOL_CONTEXT_MARKER, line, len, 0);
return;
}
ep += 2; /* skip over @@ */
/* The hunk header in fraginfo color */
if (ecbdata->opt->flags.dual_color_diffed_diffs)
strbuf_addstr(&msgbuf, reverse);
strbuf_addstr(&msgbuf, frag);
strbuf_add(&msgbuf, line, ep - line);
strbuf_addstr(&msgbuf, reset);
/*
* trailing "\r\n"
*/
for ( ; i < 3; i++)
if (line[len - i] == '\r' || line[len - i] == '\n')
len--;
/* blank before the func header */
for (cp = ep; ep - line < len; ep++)
if (*ep != ' ' && *ep != '\t')
break;
if (ep != cp) {
strbuf_addstr(&msgbuf, context);
strbuf_add(&msgbuf, cp, ep - cp);
strbuf_addstr(&msgbuf, reset);
}
if (ep < line + len) {
strbuf_addstr(&msgbuf, func);
strbuf_add(&msgbuf, ep, line + len - ep);
strbuf_addstr(&msgbuf, reset);
}
strbuf_add(&msgbuf, line + len, org_len - len);
strbuf_complete_line(&msgbuf);
emit_diff_symbol(ecbdata->opt,
DIFF_SYMBOL_CONTEXT_FRAGINFO, msgbuf.buf, msgbuf.len, 0);
strbuf_release(&msgbuf);
}
static struct diff_tempfile *claim_diff_tempfile(void)
{
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
int i;
for (i = 0; i < ARRAY_SIZE(diff_temp); i++)
if (!diff_temp[i].name)
return diff_temp + i;
BUG("diff is failing to clean up its tempfiles");
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
}
static void remove_tempfile(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(diff_temp); i++) {
tempfile: auto-allocate tempfiles on heap The previous commit taught the tempfile code to give up ownership over tempfiles that have been renamed or deleted. That makes it possible to use a stack variable like this: struct tempfile t; create_tempfile(&t, ...); ... if (!err) rename_tempfile(&t, ...); else delete_tempfile(&t); But doing it this way has a high potential for creating memory errors. The tempfile we pass to create_tempfile() ends up on a global linked list, and it's not safe for it to go out of scope until we've called one of those two deactivation functions. Imagine that we add an early return from the function that forgets to call delete_tempfile(). With a static or heap tempfile variable, the worst case is that the tempfile hangs around until the program exits (and some functions like setup_shallow_temporary rely on this intentionally, creating a tempfile and then leaving it for later cleanup). But with a stack variable as above, this is a serious memory error: the variable goes out of scope and may be filled with garbage by the time the tempfile code looks at it. Let's see if we can make it harder to get this wrong. Since many callers need to allocate arbitrary numbers of tempfiles, we can't rely on static storage as a general solution. So we need to turn to the heap. We could just ask all callers to pass us a heap variable, but that puts the burden on them to call free() at the right time. Instead, let's have the tempfile code handle the heap allocation _and_ the deallocation (when the tempfile is deactivated and removed from the list). This changes the return value of all of the creation functions. For the cleanup functions (delete and rename), we'll add one extra bit of safety: instead of taking a tempfile pointer, we'll take a pointer-to-pointer and set it to NULL after freeing the object. This makes it safe to double-call functions like delete_tempfile(), as the second call treats the NULL input as a noop. Several callsites follow this pattern. The resulting patch does have a fair bit of noise, as each caller needs to be converted to handle: 1. Storing a pointer instead of the struct itself. 2. Passing the pointer instead of taking the struct address. 3. Handling a "struct tempfile *" return instead of a file descriptor. We could play games to make this less noisy. For example, by defining the tempfile like this: struct tempfile { struct heap_allocated_part_of_tempfile { int fd; ...etc } *actual_data; } Callers would continue to have a "struct tempfile", and it would be "active" only when the inner pointer was non-NULL. But that just makes things more awkward in the long run. There aren't that many callers, so we can simply bite the bullet and adjust all of them. And the compiler makes it easy for us to find them all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-05 20:15:08 +08:00
if (is_tempfile_active(diff_temp[i].tempfile))
delete_tempfile(&diff_temp[i].tempfile);
diff_temp[i].name = NULL;
}
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
}
static void add_line_count(struct strbuf *out, int count)
{
switch (count) {
case 0:
strbuf_addstr(out, "0,0");
break;
case 1:
strbuf_addstr(out, "1");
break;
default:
strbuf_addf(out, "1,%d", count);
break;
}
}
static void emit_rewrite_lines(struct emit_callback *ecb,
int prefix, const char *data, int size)
{
const char *endp = NULL;
const char *reset = diff_get_color(ecb->color_diff, DIFF_RESET);
while (0 < size) {
int len;
endp = memchr(data, '\n', size);
len = endp ? (endp - data + 1) : size;
if (prefix != '+') {
ecb->lno_in_preimage++;
emit_del_line(reset, ecb, data, len);
} else {
ecb->lno_in_postimage++;
emit_add_line(reset, ecb, data, len);
}
size -= len;
data += len;
}
if (!endp)
emit_diff_symbol(ecb->opt, DIFF_SYMBOL_NO_LF_EOF, NULL, 0, 0);
}
static void emit_rewrite_diff(const char *name_a,
const char *name_b,
struct diff_filespec *one,
struct diff_filespec *two,
struct userdiff_driver *textconv_one,
struct userdiff_driver *textconv_two,
struct diff_options *o)
{
int lc_a, lc_b;
static struct strbuf a_name = STRBUF_INIT, b_name = STRBUF_INIT;
const char *a_prefix, *b_prefix;
char *data_one, *data_two;
size_t size_one, size_two;
struct emit_callback ecbdata;
struct strbuf out = STRBUF_INIT;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (diff_mnemonic_prefix && o->flags.reverse_diff) {
a_prefix = o->b_prefix;
b_prefix = o->a_prefix;
} else {
a_prefix = o->a_prefix;
b_prefix = o->b_prefix;
}
name_a += (*name_a == '/');
name_b += (*name_b == '/');
strbuf_reset(&a_name);
strbuf_reset(&b_name);
quote_two_c_style(&a_name, a_prefix, name_a, 0);
quote_two_c_style(&b_name, b_prefix, name_b, 0);
size_one = fill_textconv(o->repo, textconv_one, one, &data_one);
size_two = fill_textconv(o->repo, textconv_two, two, &data_two);
memset(&ecbdata, 0, sizeof(ecbdata));
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
ecbdata.color_diff = want_color(o->use_color);
ecbdata.ws_rule = whitespace_rule(o->repo->index, name_b);
ecbdata.opt = o;
if (ecbdata.ws_rule & WS_BLANK_AT_EOF) {
mmfile_t mf1, mf2;
mf1.ptr = (char *)data_one;
mf2.ptr = (char *)data_two;
mf1.size = size_one;
mf2.size = size_two;
check_blank_at_eof(&mf1, &mf2, &ecbdata);
}
ecbdata.lno_in_preimage = 1;
ecbdata.lno_in_postimage = 1;
lc_a = count_lines(data_one, size_one);
lc_b = count_lines(data_two, size_two);
emit_diff_symbol(o, DIFF_SYMBOL_FILEPAIR_MINUS,
a_name.buf, a_name.len, 0);
emit_diff_symbol(o, DIFF_SYMBOL_FILEPAIR_PLUS,
b_name.buf, b_name.len, 0);
strbuf_addstr(&out, "@@ -");
if (!o->irreversible_delete)
add_line_count(&out, lc_a);
else
strbuf_addstr(&out, "?,?");
strbuf_addstr(&out, " +");
add_line_count(&out, lc_b);
strbuf_addstr(&out, " @@\n");
emit_diff_symbol(o, DIFF_SYMBOL_REWRITE_DIFF, out.buf, out.len, 0);
strbuf_release(&out);
if (lc_a && !o->irreversible_delete)
emit_rewrite_lines(&ecbdata, '-', data_one, size_one);
if (lc_b)
emit_rewrite_lines(&ecbdata, '+', data_two, size_two);
if (textconv_one)
free((char *)data_one);
if (textconv_two)
free((char *)data_two);
}
struct diff_words_buffer {
mmfile_t text;
unsigned long alloc;
2009-01-18 00:29:44 +08:00
struct diff_words_orig {
const char *begin, *end;
} *orig;
int orig_nr, orig_alloc;
};
static void diff_words_append(char *line, unsigned long len,
struct diff_words_buffer *buffer)
{
ALLOC_GROW(buffer->text.ptr, buffer->text.size + len, buffer->alloc);
line++;
len--;
memcpy(buffer->text.ptr + buffer->text.size, line, len);
buffer->text.size += len;
buffer->text.ptr[buffer->text.size] = '\0';
}
struct diff_words_style_elem {
const char *prefix;
const char *suffix;
const char *color; /* NULL; filled in by the setup code if
* color is enabled */
};
struct diff_words_style {
enum diff_words_type type;
struct diff_words_style_elem new_word, old_word, ctx;
const char *newline;
};
Fix sparse warnings Fix warnings from 'make check'. - These files don't include 'builtin.h' causing sparse to complain that cmd_* isn't declared: builtin/clone.c:364, builtin/fetch-pack.c:797, builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78, builtin/merge-index.c:69, builtin/merge-recursive.c:22 builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426 builtin/notes.c:822, builtin/pack-redundant.c:596, builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149, builtin/remote.c:1512, builtin/remote-ext.c:240, builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384, builtin/unpack-file.c:25, builtin/var.c:75 - These files have symbols which should be marked static since they're only file scope: submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13, submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79, unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123, url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48 - These files redeclare symbols to be different types: builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571, usage.c:49, usage.c:58, usage.c:63, usage.c:72 - These files use a literal integer 0 when they really should use a NULL pointer: daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362 While we're in the area, clean up some unused #includes in builtin files (mostly exec_cmd.h). Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-22 15:51:05 +08:00
static struct diff_words_style diff_words_styles[] = {
{ DIFF_WORDS_PORCELAIN, {"+", "\n"}, {"-", "\n"}, {" ", "\n"}, "~\n" },
{ DIFF_WORDS_PLAIN, {"{+", "+}"}, {"[-", "-]"}, {"", ""}, "\n" },
{ DIFF_WORDS_COLOR, {"", ""}, {"", ""}, {"", ""}, "\n" }
};
struct diff_words_data {
struct diff_words_buffer minus, plus;
2009-01-18 00:29:44 +08:00
const char *current_plus;
int last_minus;
struct diff_options *opt;
regex_t *word_regex;
enum diff_words_type type;
struct diff_words_style *style;
};
static int fn_out_diff_words_write_helper(struct diff_options *o,
struct diff_words_style_elem *st_el,
const char *newline,
size_t count, const char *buf)
{
int print = 0;
struct strbuf sb = STRBUF_INIT;
while (count) {
char *p = memchr(buf, '\n', count);
if (print)
strbuf_addstr(&sb, diff_line_prefix(o));
if (p != buf) {
const char *reset = st_el->color && *st_el->color ?
GIT_COLOR_RESET : NULL;
if (st_el->color && *st_el->color)
strbuf_addstr(&sb, st_el->color);
strbuf_addstr(&sb, st_el->prefix);
strbuf_add(&sb, buf, p ? p - buf : count);
strbuf_addstr(&sb, st_el->suffix);
if (reset)
strbuf_addstr(&sb, reset);
}
if (!p)
goto out;
strbuf_addstr(&sb, newline);
count -= p + 1 - buf;
buf = p + 1;
print = 1;
if (count) {
emit_diff_symbol(o, DIFF_SYMBOL_WORD_DIFF,
sb.buf, sb.len, 0);
strbuf_reset(&sb);
}
}
out:
if (sb.len)
emit_diff_symbol(o, DIFF_SYMBOL_WORD_DIFF,
sb.buf, sb.len, 0);
strbuf_release(&sb);
return 0;
}
/*
* '--color-words' algorithm can be described as:
*
* 1. collect the minus/plus lines of a diff hunk, divided into
* minus-lines and plus-lines;
*
* 2. break both minus-lines and plus-lines into words and
* place them into two mmfile_t with one word for each line;
*
* 3. use xdiff to run diff on the two mmfile_t to get the words level diff;
*
* And for the common parts of the both file, we output the plus side text.
* diff_words->current_plus is used to trace the current position of the plus file
* which printed. diff_words->last_minus is used to trace the last minus word
* printed.
*
* For '--graph' to work with '--color-words', we need to output the graph prefix
* on each line of color words output. Generally, there are two conditions on
* which we should output the prefix.
*
* 1. diff_words->last_minus == 0 &&
* diff_words->current_plus == diff_words->plus.text.ptr
*
* that is: the plus text must start as a new line, and if there is no minus
* word printed, a graph prefix must be printed.
*
* 2. diff_words->current_plus > diff_words->plus.text.ptr &&
* *(diff_words->current_plus - 1) == '\n'
*
* that is: a graph prefix must be printed following a '\n'
*/
static int color_words_output_graph_prefix(struct diff_words_data *diff_words)
{
if ((diff_words->last_minus == 0 &&
diff_words->current_plus == diff_words->plus.text.ptr) ||
(diff_words->current_plus > diff_words->plus.text.ptr &&
*(diff_words->current_plus - 1) == '\n')) {
return 1;
} else {
return 0;
}
}
static void fn_out_diff_words_aux(void *priv,
long minus_first, long minus_len,
long plus_first, long plus_len,
const char *func, long funclen)
{
struct diff_words_data *diff_words = priv;
struct diff_words_style *style = diff_words->style;
2009-01-18 00:29:44 +08:00
const char *minus_begin, *minus_end, *plus_begin, *plus_end;
struct diff_options *opt = diff_words->opt;
const char *line_prefix;
assert(opt);
line_prefix = diff_line_prefix(opt);
2009-01-18 00:29:44 +08:00
/* POSIX requires that first be decremented by one if len == 0... */
if (minus_len) {
minus_begin = diff_words->minus.orig[minus_first].begin;
minus_end =
diff_words->minus.orig[minus_first + minus_len - 1].end;
} else
minus_begin = minus_end =
diff_words->minus.orig[minus_first].end;
if (plus_len) {
plus_begin = diff_words->plus.orig[plus_first].begin;
plus_end = diff_words->plus.orig[plus_first + plus_len - 1].end;
} else
plus_begin = plus_end = diff_words->plus.orig[plus_first].end;
if (color_words_output_graph_prefix(diff_words)) {
fputs(line_prefix, diff_words->opt->file);
}
if (diff_words->current_plus != plus_begin) {
fn_out_diff_words_write_helper(diff_words->opt,
&style->ctx, style->newline,
plus_begin - diff_words->current_plus,
diff_words->current_plus);
}
if (minus_begin != minus_end) {
fn_out_diff_words_write_helper(diff_words->opt,
&style->old_word, style->newline,
minus_end - minus_begin, minus_begin);
}
if (plus_begin != plus_end) {
fn_out_diff_words_write_helper(diff_words->opt,
&style->new_word, style->newline,
plus_end - plus_begin, plus_begin);
}
2009-01-18 00:29:44 +08:00
diff_words->current_plus = plus_end;
diff_words->last_minus = minus_first;
}
/* This function starts looking at *begin, and returns 0 iff a word was found. */
static int find_word_boundaries(mmfile_t *buffer, regex_t *word_regex,
int *begin, int *end)
{
if (word_regex && *begin < buffer->size) {
regmatch_t match[1];
if (!regexec_buf(word_regex, buffer->ptr + *begin,
buffer->size - *begin, 1, match, 0)) {
char *p = memchr(buffer->ptr + *begin + match[0].rm_so,
'\n', match[0].rm_eo - match[0].rm_so);
*end = p ? p - buffer->ptr : match[0].rm_eo + *begin;
*begin += match[0].rm_so;
return *begin >= *end;
}
return -1;
}
/* find the next word */
while (*begin < buffer->size && isspace(buffer->ptr[*begin]))
(*begin)++;
if (*begin >= buffer->size)
return -1;
/* find the end of the word */
*end = *begin + 1;
while (*end < buffer->size && !isspace(buffer->ptr[*end]))
(*end)++;
return 0;
}
/*
2009-01-18 00:29:44 +08:00
* This function splits the words in buffer->text, stores the list with
* newline separator into out, and saves the offsets of the original words
* in buffer->orig.
*/
static void diff_words_fill(struct diff_words_buffer *buffer, mmfile_t *out,
regex_t *word_regex)
{
2009-01-18 00:29:44 +08:00
int i, j;
long alloc = 0;
2009-01-18 00:29:44 +08:00
out->size = 0;
out->ptr = NULL;
2009-01-18 00:29:44 +08:00
/* fake an empty "0th" word */
ALLOC_GROW(buffer->orig, 1, buffer->orig_alloc);
buffer->orig[0].begin = buffer->orig[0].end = buffer->text.ptr;
buffer->orig_nr = 1;
for (i = 0; i < buffer->text.size; i++) {
if (find_word_boundaries(&buffer->text, word_regex, &i, &j))
return;
2009-01-18 00:29:44 +08:00
/* store original boundaries */
ALLOC_GROW(buffer->orig, buffer->orig_nr + 1,
buffer->orig_alloc);
buffer->orig[buffer->orig_nr].begin = buffer->text.ptr + i;
buffer->orig[buffer->orig_nr].end = buffer->text.ptr + j;
buffer->orig_nr++;
/* store one word */
ALLOC_GROW(out->ptr, out->size + j - i + 1, alloc);
2009-01-18 00:29:44 +08:00
memcpy(out->ptr + out->size, buffer->text.ptr + i, j - i);
out->ptr[out->size + j - i] = '\n';
out->size += j - i + 1;
i = j - 1;
}
}
/* this executes the word diff on the accumulated buffers */
static void diff_words_show(struct diff_words_data *diff_words)
{
xpparam_t xpp;
xdemitconf_t xecfg;
mmfile_t minus, plus;
struct diff_words_style *style = diff_words->style;
struct diff_options *opt = diff_words->opt;
const char *line_prefix;
assert(opt);
line_prefix = diff_line_prefix(opt);
2009-01-18 00:29:44 +08:00
/* special case: only removal */
if (!diff_words->plus.text.size) {
emit_diff_symbol(diff_words->opt, DIFF_SYMBOL_WORD_DIFF,
line_prefix, strlen(line_prefix), 0);
fn_out_diff_words_write_helper(diff_words->opt,
&style->old_word, style->newline,
diff_words->minus.text.size,
diff_words->minus.text.ptr);
2009-01-18 00:29:44 +08:00
diff_words->minus.text.size = 0;
return;
}
diff_words->current_plus = diff_words->plus.text.ptr;
diff_words->last_minus = 0;
memset(&xpp, 0, sizeof(xpp));
memset(&xecfg, 0, sizeof(xecfg));
diff_words_fill(&diff_words->minus, &minus, diff_words->word_regex);
diff_words_fill(&diff_words->plus, &plus, diff_words->word_regex);
xpp.flags = 0;
/* as only the hunk header will be parsed, we need a 0-context */
2009-01-18 00:29:44 +08:00
xecfg.ctxlen = 0;
if (xdi_diff_outf(&minus, &plus, fn_out_diff_words_aux, NULL,
diff_words, &xpp, &xecfg))
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 07:12:23 +08:00
die("unable to generate word diff");
free(minus.ptr);
free(plus.ptr);
2009-01-18 00:29:44 +08:00
if (diff_words->current_plus != diff_words->plus.text.ptr +
diff_words->plus.text.size) {
if (color_words_output_graph_prefix(diff_words))
emit_diff_symbol(diff_words->opt, DIFF_SYMBOL_WORD_DIFF,
line_prefix, strlen(line_prefix), 0);
fn_out_diff_words_write_helper(diff_words->opt,
&style->ctx, style->newline,
2009-01-18 00:29:44 +08:00
diff_words->plus.text.ptr + diff_words->plus.text.size
- diff_words->current_plus, diff_words->current_plus);
}
diff_words->minus.text.size = diff_words->plus.text.size = 0;
}
2009-10-31 01:09:06 +08:00
/* In "color-words" mode, show word-diff of words accumulated in the buffer */
static void diff_words_flush(struct emit_callback *ecbdata)
{
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
struct diff_options *wo = ecbdata->diff_words->opt;
2009-10-31 01:09:06 +08:00
if (ecbdata->diff_words->minus.text.size ||
ecbdata->diff_words->plus.text.size)
diff_words_show(ecbdata->diff_words);
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
if (wo->emitted_symbols) {
struct diff_options *o = ecbdata->opt;
struct emitted_diff_symbols *wol = wo->emitted_symbols;
int i;
/*
* NEEDSWORK:
* Instead of appending each, concat all words to a line?
*/
for (i = 0; i < wol->nr; i++)
append_emitted_diff_symbol(o, &wol->buf[i]);
for (i = 0; i < wol->nr; i++)
free((void *)wol->buf[i].line);
wol->nr = 0;
}
2009-10-31 01:09:06 +08:00
}
static void diff_filespec_load_driver(struct diff_filespec *one,
struct index_state *istate)
{
/* Use already-loaded driver */
if (one->driver)
return;
if (S_ISREG(one->mode))
one->driver = userdiff_find_by_path(istate, one->path);
/* Fallback to default settings */
if (!one->driver)
one->driver = userdiff_find_by_name("default");
}
static const char *userdiff_word_regex(struct diff_filespec *one,
struct index_state *istate)
{
diff_filespec_load_driver(one, istate);
return one->driver->word_regex;
}
static void init_diff_words_data(struct emit_callback *ecbdata,
struct diff_options *orig_opts,
struct diff_filespec *one,
struct diff_filespec *two)
{
int i;
struct diff_options *o = xmalloc(sizeof(struct diff_options));
memcpy(o, orig_opts, sizeof(struct diff_options));
ecbdata->diff_words =
xcalloc(1, sizeof(struct diff_words_data));
ecbdata->diff_words->type = o->word_diff;
ecbdata->diff_words->opt = o;
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
if (orig_opts->emitted_symbols)
o->emitted_symbols =
xcalloc(1, sizeof(struct emitted_diff_symbols));
if (!o->word_regex)
o->word_regex = userdiff_word_regex(one, o->repo->index);
if (!o->word_regex)
o->word_regex = userdiff_word_regex(two, o->repo->index);
if (!o->word_regex)
o->word_regex = diff_word_regex_cfg;
if (o->word_regex) {
ecbdata->diff_words->word_regex = (regex_t *)
xmalloc(sizeof(regex_t));
if (regcomp(ecbdata->diff_words->word_regex,
o->word_regex,
REG_EXTENDED | REG_NEWLINE))
die("invalid regular expression: %s",
o->word_regex);
}
for (i = 0; i < ARRAY_SIZE(diff_words_styles); i++) {
if (o->word_diff == diff_words_styles[i].type) {
ecbdata->diff_words->style =
&diff_words_styles[i];
break;
}
}
if (want_color(o->use_color)) {
struct diff_words_style *st = ecbdata->diff_words->style;
st->old_word.color = diff_get_color_opt(o, DIFF_FILE_OLD);
st->new_word.color = diff_get_color_opt(o, DIFF_FILE_NEW);
st->ctx.color = diff_get_color_opt(o, DIFF_CONTEXT);
}
}
static void free_diff_words_data(struct emit_callback *ecbdata)
{
if (ecbdata->diff_words) {
2009-10-31 01:09:06 +08:00
diff_words_flush(ecbdata);
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
free (ecbdata->diff_words->opt->emitted_symbols);
free (ecbdata->diff_words->opt);
Avoid unnecessary "if-before-free" tests. This change removes all obvious useless if-before-free tests. E.g., it replaces code like this: if (some_expression) free (some_expression); with the now-equivalent: free (some_expression); It is equivalent not just because POSIX has required free(NULL) to work for a long time, but simply because it has worked for so long that no reasonable porting target fails the test. Here's some evidence from nearly 1.5 years ago: http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html FYI, the change below was prepared by running the following: git ls-files -z | xargs -0 \ perl -0x3b -pi -e \ 's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s' Note however, that it doesn't handle brace-enclosed blocks like "if (x) { free (x); }". But that's ok, since there were none like that in git sources. Beware: if you do use the above snippet, note that it can produce syntactically invalid C code. That happens when the affected "if"-statement has a matching "else". E.g., it would transform this if (x) free (x); else foo (); into this: free (x); else foo (); There were none of those here, either. If you're interested in automating detection of the useless tests, you might like the useless-if-before-free script in gnulib: [it *does* detect brace-enclosed free statements, and has a --name=S option to make it detect free-like functions with different names] http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free Addendum: Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 01:26:32 +08:00
free (ecbdata->diff_words->minus.text.ptr);
2009-01-18 00:29:44 +08:00
free (ecbdata->diff_words->minus.orig);
Avoid unnecessary "if-before-free" tests. This change removes all obvious useless if-before-free tests. E.g., it replaces code like this: if (some_expression) free (some_expression); with the now-equivalent: free (some_expression); It is equivalent not just because POSIX has required free(NULL) to work for a long time, but simply because it has worked for so long that no reasonable porting target fails the test. Here's some evidence from nearly 1.5 years ago: http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html FYI, the change below was prepared by running the following: git ls-files -z | xargs -0 \ perl -0x3b -pi -e \ 's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s' Note however, that it doesn't handle brace-enclosed blocks like "if (x) { free (x); }". But that's ok, since there were none like that in git sources. Beware: if you do use the above snippet, note that it can produce syntactically invalid C code. That happens when the affected "if"-statement has a matching "else". E.g., it would transform this if (x) free (x); else foo (); into this: free (x); else foo (); There were none of those here, either. If you're interested in automating detection of the useless tests, you might like the useless-if-before-free script in gnulib: [it *does* detect brace-enclosed free statements, and has a --name=S option to make it detect free-like functions with different names] http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free Addendum: Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 01:26:32 +08:00
free (ecbdata->diff_words->plus.text.ptr);
2009-01-18 00:29:44 +08:00
free (ecbdata->diff_words->plus.orig);
if (ecbdata->diff_words->word_regex) {
regfree(ecbdata->diff_words->word_regex);
free(ecbdata->diff_words->word_regex);
}
FREE_AND_NULL(ecbdata->diff_words);
}
}
const char *diff_get_color(int diff_use_color, enum color_diff ix)
{
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
if (want_color(diff_use_color))
return diff_colors[ix];
return "";
}
const char *diff_line_prefix(struct diff_options *opt)
{
struct strbuf *msgbuf;
if (!opt->output_prefix)
return "";
msgbuf = opt->output_prefix(opt, opt->output_prefix_data);
return msgbuf->buf;
}
static unsigned long sane_truncate_line(struct emit_callback *ecb, char *line, unsigned long len)
{
const char *cp;
unsigned long allot;
size_t l = len;
cp = line;
allot = l;
while (0 < l) {
(void) utf8_width(&cp, &l);
if (!cp)
break; /* truncated in the middle? */
}
return allot - l;
}
static void find_lno(const char *line, struct emit_callback *ecbdata)
{
const char *p;
ecbdata->lno_in_preimage = 0;
ecbdata->lno_in_postimage = 0;
p = strchr(line, '-');
if (!p)
return; /* cannot happen */
ecbdata->lno_in_preimage = strtol(p + 1, NULL, 10);
p = strchr(p, '+');
if (!p)
return; /* cannot happen */
ecbdata->lno_in_postimage = strtol(p + 1, NULL, 10);
}
static void fn_out_consume(void *priv, char *line, unsigned long len)
{
struct emit_callback *ecbdata = priv;
const char *reset = diff_get_color(ecbdata->color_diff, DIFF_RESET);
struct diff_options *o = ecbdata->opt;
o->found_changes = 1;
if (ecbdata->header) {
emit_diff_symbol(o, DIFF_SYMBOL_HEADER,
ecbdata->header->buf, ecbdata->header->len, 0);
strbuf_reset(ecbdata->header);
ecbdata->header = NULL;
}
if (ecbdata->label_path[0]) {
emit_diff_symbol(o, DIFF_SYMBOL_FILEPAIR_MINUS,
ecbdata->label_path[0],
strlen(ecbdata->label_path[0]), 0);
emit_diff_symbol(o, DIFF_SYMBOL_FILEPAIR_PLUS,
ecbdata->label_path[1],
strlen(ecbdata->label_path[1]), 0);
ecbdata->label_path[0] = ecbdata->label_path[1] = NULL;
}
if (diff_suppress_blank_empty
&& len == 2 && line[0] == ' ' && line[1] == '\n') {
line[0] = '\n';
len = 1;
}
if (line[0] == '@') {
2009-10-31 01:09:06 +08:00
if (ecbdata->diff_words)
diff_words_flush(ecbdata);
len = sane_truncate_line(ecbdata, line, len);
find_lno(line, ecbdata);
emit_hunk_header(ecbdata, line, len);
return;
}
if (ecbdata->diff_words) {
enum diff_symbol s =
ecbdata->diff_words->type == DIFF_WORDS_PORCELAIN ?
DIFF_SYMBOL_WORDS_PORCELAIN : DIFF_SYMBOL_WORDS;
if (line[0] == '-') {
diff_words_append(line, len,
&ecbdata->diff_words->minus);
return;
} else if (line[0] == '+') {
diff_words_append(line, len,
&ecbdata->diff_words->plus);
return;
} else if (starts_with(line, "\\ ")) {
/*
* Eat the "no newline at eof" marker as if we
* saw a "+" or "-" line with nothing on it,
* and return without diff_words_flush() to
* defer processing. If this is the end of
* preimage, more "+" lines may come after it.
*/
return;
}
2009-10-31 01:09:06 +08:00
diff_words_flush(ecbdata);
emit_diff_symbol(o, s, line, len, 0);
return;
}
switch (line[0]) {
case '+':
ecbdata->lno_in_postimage++;
emit_add_line(reset, ecbdata, line + 1, len - 1);
break;
case '-':
ecbdata->lno_in_preimage++;
emit_del_line(reset, ecbdata, line + 1, len - 1);
break;
case ' ':
ecbdata->lno_in_postimage++;
ecbdata->lno_in_preimage++;
emit_context_line(reset, ecbdata, line + 1, len - 1);
break;
default:
/* incomplete line at the end */
ecbdata->lno_in_preimage++;
emit_diff_symbol(o, DIFF_SYMBOL_CONTEXT_INCOMPLETE,
line, len, 0);
break;
}
}
static void pprint_rename(struct strbuf *name, const char *a, const char *b)
{
const char *old_name = a;
const char *new_name = b;
int pfx_length, sfx_length;
int pfx_adjust_for_slash;
int len_a = strlen(a);
int len_b = strlen(b);
int a_midlen, b_midlen;
int qlen_a = quote_c_style(a, NULL, NULL, 0);
int qlen_b = quote_c_style(b, NULL, NULL, 0);
if (qlen_a || qlen_b) {
quote_c_style(a, name, NULL, 0);
strbuf_addstr(name, " => ");
quote_c_style(b, name, NULL, 0);
return;
}
/* Find common prefix */
pfx_length = 0;
while (*old_name && *new_name && *old_name == *new_name) {
if (*old_name == '/')
pfx_length = old_name - a + 1;
old_name++;
new_name++;
}
/* Find common suffix */
old_name = a + len_a;
new_name = b + len_b;
sfx_length = 0;
/*
* If there is a common prefix, it must end in a slash. In
* that case we let this loop run 1 into the prefix to see the
* same slash.
*
* If there is no common prefix, we cannot do this as it would
* underrun the input strings.
*/
pfx_adjust_for_slash = (pfx_length ? 1 : 0);
while (a + pfx_length - pfx_adjust_for_slash <= old_name &&
b + pfx_length - pfx_adjust_for_slash <= new_name &&
*old_name == *new_name) {
if (*old_name == '/')
sfx_length = len_a - (old_name - a);
old_name--;
new_name--;
}
/*
* pfx{mid-a => mid-b}sfx
* {pfx-a => pfx-b}sfx
* pfx{sfx-a => sfx-b}
* name-a => name-b
*/
a_midlen = len_a - pfx_length - sfx_length;
b_midlen = len_b - pfx_length - sfx_length;
if (a_midlen < 0)
a_midlen = 0;
if (b_midlen < 0)
b_midlen = 0;
strbuf_grow(name, pfx_length + a_midlen + b_midlen + sfx_length + 7);
if (pfx_length + sfx_length) {
strbuf_add(name, a, pfx_length);
strbuf_addch(name, '{');
}
strbuf_add(name, a + pfx_length, a_midlen);
strbuf_addstr(name, " => ");
strbuf_add(name, b + pfx_length, b_midlen);
if (pfx_length + sfx_length) {
strbuf_addch(name, '}');
strbuf_add(name, a + len_a - sfx_length, sfx_length);
}
}
struct diffstat_t {
int nr;
int alloc;
struct diffstat_file {
char *from_name;
char *name;
char *print_name;
const char *comments;
unsigned is_unmerged:1;
unsigned is_binary:1;
unsigned is_renamed:1;
Fix "git diff --stat" for interesting - but empty - file changes The behavior of "git diff --stat" is rather odd for files that have zero lines of changes: it will discount them entirely unless they were renames. Which means that the stat output will simply not show files that only had "other" changes: they were created or deleted, or their mode was changed. Now, those changes do show up in the summary, but so do renames, so the diffstat logic is inconsistent. Why does it show renames with zero lines changed, but not mode changes or added files with zero lines changed? So change the logic to not check for "is_renamed", but for "is_interesting" instead, where "interesting" is judged to be any action but a pure data change (because a pure data change with zero data changed really isn't worth showing, if we ever get one in our diffpairs). So if you did chmod +x Makefile git diff --stat before, it would show empty (" 0 files changed"), with this it shows Makefile | 0 1 file changed, 0 insertions(+), 0 deletions(-) which I think is a more correct diffstat (and then with "--summary" it shows *what* the metadata change to Makefile was - this is completely consistent with our handling of renamed files). Side note: the old behavior was *really* odd. With no changes at all, "git diff --stat" output was empty. With just a chmod, it said "0 files changed". No way is our legacy behavior sane. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-18 01:00:37 +08:00
unsigned is_interesting:1;
uintmax_t added, deleted;
} **files;
};
static struct diffstat_file *diffstat_add(struct diffstat_t *diffstat,
const char *name_a,
const char *name_b)
{
struct diffstat_file *x;
x = xcalloc(1, sizeof(*x));
ALLOC_GROW(diffstat->files, diffstat->nr + 1, diffstat->alloc);
diffstat->files[diffstat->nr++] = x;
if (name_b) {
x->from_name = xstrdup(name_a);
x->name = xstrdup(name_b);
x->is_renamed = 1;
}
else {
x->from_name = NULL;
x->name = xstrdup(name_a);
}
return x;
}
static void diffstat_consume(void *priv, char *line, unsigned long len)
{
struct diffstat_t *diffstat = priv;
struct diffstat_file *x = diffstat->files[diffstat->nr - 1];
if (line[0] == '+')
x->added++;
else if (line[0] == '-')
x->deleted++;
}
const char mime_boundary_leader[] = "------------";
static int scale_linear(int it, int width, int max_change)
{
if (!it)
return 0;
/*
* make sure that at least one '-' or '+' is printed if
* there is any change to this path. The easiest way is to
* scale linearly as if the alloted width is one column shorter
* than it is, and then add 1 to the result.
*/
return 1 + (it * (width - 1) / max_change);
}
static void show_graph(struct strbuf *out, char ch, int cnt,
const char *set, const char *reset)
{
if (cnt <= 0)
return;
strbuf_addstr(out, set);
strbuf_addchars(out, ch, cnt);
strbuf_addstr(out, reset);
}
static void fill_print_name(struct diffstat_file *file)
{
struct strbuf pname = STRBUF_INIT;
if (file->print_name)
return;
if (file->is_renamed)
pprint_rename(&pname, file->from_name, file->name);
else
quote_c_style(file->name, &pname, NULL, 0);
if (file->comments)
strbuf_addf(&pname, " (%s)", file->comments);
file->print_name = strbuf_detach(&pname, NULL);
}
static void print_stat_summary_inserts_deletes(struct diff_options *options,
int files, int insertions, int deletions)
{
struct strbuf sb = STRBUF_INIT;
if (!files) {
assert(insertions == 0 && deletions == 0);
emit_diff_symbol(options, DIFF_SYMBOL_STATS_SUMMARY_NO_FILES,
NULL, 0, 0);
return;
}
strbuf_addf(&sb,
(files == 1) ? " %d file changed" : " %d files changed",
files);
/*
* For binary diff, the caller may want to print "x files
* changed" with insertions == 0 && deletions == 0.
*
* Not omitting "0 insertions(+), 0 deletions(-)" in this case
* is probably less confusing (i.e skip over "2 files changed
* but nothing about added/removed lines? Is this a bug in Git?").
*/
if (insertions || deletions == 0) {
strbuf_addf(&sb,
(insertions == 1) ? ", %d insertion(+)" : ", %d insertions(+)",
insertions);
}
if (deletions || insertions == 0) {
strbuf_addf(&sb,
(deletions == 1) ? ", %d deletion(-)" : ", %d deletions(-)",
deletions);
}
strbuf_addch(&sb, '\n');
emit_diff_symbol(options, DIFF_SYMBOL_STATS_SUMMARY_INSERTS_DELETES,
sb.buf, sb.len, 0);
strbuf_release(&sb);
}
void print_stat_summary(FILE *fp, int files,
int insertions, int deletions)
{
struct diff_options o;
memset(&o, 0, sizeof(o));
o.file = fp;
print_stat_summary_inserts_deletes(&o, files, insertions, deletions);
}
static void show_stats(struct diffstat_t *data, struct diff_options *options)
{
int i, len, add, del, adds = 0, dels = 0;
uintmax_t max_change = 0, max_len = 0;
int total_files = data->nr, count;
int width, name_width, graph_width, number_width = 0, bin_width = 0;
const char *reset, *add_c, *del_c;
int extra_shown = 0;
const char *line_prefix = diff_line_prefix(options);
struct strbuf out = STRBUF_INIT;
if (data->nr == 0)
return;
count = options->stat_count ? options->stat_count : data->nr;
reset = diff_get_color_opt(options, DIFF_RESET);
add_c = diff_get_color_opt(options, DIFF_FILE_NEW);
del_c = diff_get_color_opt(options, DIFF_FILE_OLD);
/*
* Find the longest filename and max number of changes
*/
for (i = 0; (i < count) && (i < data->nr); i++) {
struct diffstat_file *file = data->files[i];
uintmax_t change = file->added + file->deleted;
if (!file->is_interesting && (change == 0)) {
count++; /* not shown == room for one more */
continue;
}
fill_print_name(file);
len = strlen(file->print_name);
if (max_len < len)
max_len = len;
if (file->is_unmerged) {
/* "Unmerged" is 8 characters */
bin_width = bin_width < 8 ? 8 : bin_width;
continue;
}
if (file->is_binary) {
/* "Bin XXX -> YYY bytes" */
int w = 14 + decimal_width(file->added)
+ decimal_width(file->deleted);
bin_width = bin_width < w ? w : bin_width;
/* Display change counts aligned with "Bin" */
number_width = 3;
continue;
}
if (max_change < change)
max_change = change;
}
count = i; /* where we can stop scanning in data->files[] */
/*
* We have width = stat_width or term_columns() columns total.
* We want a maximum of min(max_len, stat_name_width) for the name part.
* We want a maximum of min(max_change, stat_graph_width) for the +- part.
* We also need 1 for " " and 4 + decimal_width(max_change)
* for " | NNNN " and one the empty column at the end, altogether
* 6 + decimal_width(max_change).
*
* If there's not enough space, we will use the smaller of
* stat_name_width (if set) and 5/8*width for the filename,
* and the rest for constant elements + graph part, but no more
* than stat_graph_width for the graph part.
* (5/8 gives 50 for filename and 30 for the constant parts + graph
* for the standard terminal size).
*
* In other words: stat_width limits the maximum width, and
* stat_name_width fixes the maximum width of the filename,
* and is also used to divide available columns if there
* aren't enough.
*
* Binary files are displayed with "Bin XXX -> YYY bytes"
* instead of the change count and graph. This part is treated
* similarly to the graph part, except that it is not
* "scaled". If total width is too small to accommodate the
* guaranteed minimum width of the filename part and the
* separators and this message, this message will "overflow"
* making the line longer than the maximum width.
*/
if (options->stat_width == -1)
width = term_columns() - strlen(line_prefix);
else
width = options->stat_width ? options->stat_width : 80;
number_width = decimal_width(max_change) > number_width ?
decimal_width(max_change) : number_width;
if (options->stat_graph_width == -1)
options->stat_graph_width = diff_stat_graph_width;
/*
* Guarantee 3/8*16==6 for the graph part
* and 5/8*16==10 for the filename part
*/
if (width < 16 + 6 + number_width)
width = 16 + 6 + number_width;
/*
* First assign sizes that are wanted, ignoring available width.
* strlen("Bin XXX -> YYY bytes") == bin_width, and the part
* starting from "XXX" should fit in graph_width.
*/
graph_width = max_change + 4 > bin_width ? max_change : bin_width - 4;
if (options->stat_graph_width &&
options->stat_graph_width < graph_width)
graph_width = options->stat_graph_width;
name_width = (options->stat_name_width > 0 &&
options->stat_name_width < max_len) ?
options->stat_name_width : max_len;
/*
* Adjust adjustable widths not to exceed maximum width
*/
if (name_width + number_width + 6 + graph_width > width) {
if (graph_width > width * 3/8 - number_width - 6) {
graph_width = width * 3/8 - number_width - 6;
if (graph_width < 6)
graph_width = 6;
}
if (options->stat_graph_width &&
graph_width > options->stat_graph_width)
graph_width = options->stat_graph_width;
if (name_width > width - number_width - 6 - graph_width)
name_width = width - number_width - 6 - graph_width;
else
graph_width = width - number_width - 6 - name_width;
}
/*
* From here name_width is the width of the name area,
* and graph_width is the width of the graph area.
* max_change is used to scale graph properly.
*/
for (i = 0; i < count; i++) {
const char *prefix = "";
struct diffstat_file *file = data->files[i];
char *name = file->print_name;
uintmax_t added = file->added;
uintmax_t deleted = file->deleted;
int name_len;
if (!file->is_interesting && (added + deleted == 0))
continue;
/*
* "scale" the filename
*/
len = name_width;
name_len = strlen(name);
if (name_width < name_len) {
char *slash;
prefix = "...";
len -= 3;
name += name_len - len;
slash = strchr(name, '/');
if (slash)
name = slash;
}
if (file->is_binary) {
strbuf_addf(&out, " %s%-*s |", prefix, len, name);
strbuf_addf(&out, " %*s", number_width, "Bin");
if (!added && !deleted) {
strbuf_addch(&out, '\n');
emit_diff_symbol(options, DIFF_SYMBOL_STATS_LINE,
out.buf, out.len, 0);
strbuf_reset(&out);
continue;
}
strbuf_addf(&out, " %s%"PRIuMAX"%s",
del_c, deleted, reset);
strbuf_addstr(&out, " -> ");
strbuf_addf(&out, "%s%"PRIuMAX"%s",
add_c, added, reset);
strbuf_addstr(&out, " bytes\n");
emit_diff_symbol(options, DIFF_SYMBOL_STATS_LINE,
out.buf, out.len, 0);
strbuf_reset(&out);
continue;
}
else if (file->is_unmerged) {
strbuf_addf(&out, " %s%-*s |", prefix, len, name);
strbuf_addstr(&out, " Unmerged\n");
emit_diff_symbol(options, DIFF_SYMBOL_STATS_LINE,
out.buf, out.len, 0);
strbuf_reset(&out);
continue;
}
/*
* scale the add/delete
*/
add = added;
del = deleted;
if (graph_width <= max_change) {
int total = scale_linear(add + del, graph_width, max_change);
if (total < 2 && add && del)
/* width >= 2 due to the sanity check */
total = 2;
if (add < del) {
add = scale_linear(add, graph_width, max_change);
del = total - add;
} else {
del = scale_linear(del, graph_width, max_change);
add = total - del;
}
}
strbuf_addf(&out, " %s%-*s |", prefix, len, name);
strbuf_addf(&out, " %*"PRIuMAX"%s",
number_width, added + deleted,
added + deleted ? " " : "");
show_graph(&out, '+', add, add_c, reset);
show_graph(&out, '-', del, del_c, reset);
strbuf_addch(&out, '\n');
emit_diff_symbol(options, DIFF_SYMBOL_STATS_LINE,
out.buf, out.len, 0);
strbuf_reset(&out);
}
for (i = 0; i < data->nr; i++) {
struct diffstat_file *file = data->files[i];
uintmax_t added = file->added;
uintmax_t deleted = file->deleted;
if (file->is_unmerged ||
(!file->is_interesting && (added + deleted == 0))) {
total_files--;
continue;
}
if (!file->is_binary) {
adds += added;
dels += deleted;
}
if (i < count)
continue;
if (!extra_shown)
emit_diff_symbol(options,
DIFF_SYMBOL_STATS_SUMMARY_ABBREV,
NULL, 0, 0);
extra_shown = 1;
}
print_stat_summary_inserts_deletes(options, total_files, adds, dels);
strbuf_release(&out);
}
static void show_shortstats(struct diffstat_t *data, struct diff_options *options)
{
int i, adds = 0, dels = 0, total_files = data->nr;
if (data->nr == 0)
return;
for (i = 0; i < data->nr; i++) {
int added = data->files[i]->added;
int deleted = data->files[i]->deleted;
if (data->files[i]->is_unmerged ||
(!data->files[i]->is_interesting && (added + deleted == 0))) {
total_files--;
} else if (!data->files[i]->is_binary) { /* don't count bytes */
adds += added;
dels += deleted;
}
}
print_stat_summary_inserts_deletes(options, total_files, adds, dels);
}
static void show_numstat(struct diffstat_t *data, struct diff_options *options)
{
int i;
if (data->nr == 0)
return;
for (i = 0; i < data->nr; i++) {
struct diffstat_file *file = data->files[i];
fprintf(options->file, "%s", diff_line_prefix(options));
if (file->is_binary)
fprintf(options->file, "-\t-\t");
else
fprintf(options->file,
"%"PRIuMAX"\t%"PRIuMAX"\t",
file->added, file->deleted);
if (options->line_termination) {
fill_print_name(file);
if (!file->is_renamed)
write_name_quoted(file->name, options->file,
options->line_termination);
else {
fputs(file->print_name, options->file);
putc(options->line_termination, options->file);
}
} else {
if (file->is_renamed) {
putc('\0', options->file);
write_name_quoted(file->from_name, options->file, '\0');
}
write_name_quoted(file->name, options->file, '\0');
}
}
}
struct dirstat_file {
const char *name;
unsigned long changed;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
};
struct dirstat_dir {
struct dirstat_file *files;
int alloc, nr, permille, cumulative;
};
static long gather_dirstat(struct diff_options *opt, struct dirstat_dir *dir,
unsigned long changed, const char *base, int baselen)
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
{
unsigned long sum_changes = 0;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
unsigned int sources = 0;
const char *line_prefix = diff_line_prefix(opt);
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
while (dir->nr) {
struct dirstat_file *f = dir->files;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
int namelen = strlen(f->name);
unsigned long changes;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
char *slash;
if (namelen < baselen)
break;
if (memcmp(f->name, base, baselen))
break;
slash = strchr(f->name + baselen, '/');
if (slash) {
int newbaselen = slash + 1 - f->name;
changes = gather_dirstat(opt, dir, changed, f->name, newbaselen);
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
sources++;
} else {
changes = f->changed;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
dir->files++;
dir->nr--;
sources += 2;
}
sum_changes += changes;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
}
/*
* We don't report dirstat's for
* - the top level
* - or cases where everything came from a single directory
* under this directory (sources == 1).
*/
if (baselen && sources != 1) {
if (sum_changes) {
int permille = sum_changes * 1000 / changed;
if (permille >= dir->permille) {
fprintf(opt->file, "%s%4d.%01d%% %.*s\n", line_prefix,
permille / 10, permille % 10, baselen, base);
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
if (!dir->cumulative)
return 0;
}
}
}
return sum_changes;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
}
Fix '--dirstat' with cross-directory renaming The dirstat code depends on the fact that we always generate diffs with the names sorted, since it then just does a single-pass walk-over of the sorted list of names and how many changes there were. The sorting means that all files are nicely grouped by directory. That all works fine. Except when we have rename detection, and suddenly the nicely sorted list of pathnames isn't all that sorted at all. And now the single-pass dirstat walk gets all confused, and you can get results like this: [torvalds@nehalem linux]$ git diff --dirstat=2 -M v2.6.27-rc4..v2.6.27-rc5 3.0% arch/powerpc/configs/ 6.8% arch/arm/configs/ 2.7% arch/powerpc/configs/ 4.2% arch/arm/configs/ 5.6% arch/powerpc/configs/ 8.4% arch/arm/configs/ 5.5% arch/powerpc/configs/ 23.3% arch/arm/configs/ 8.6% arch/powerpc/configs/ 4.0% arch/ 4.4% drivers/usb/musb/ 4.0% drivers/watchdog/ 7.6% drivers/ 3.5% fs/ The trivial fix is to add a sorting pass, fixing it to: [torvalds@nehalem linux]$ git diff --dirstat=2 -M v2.6.27-rc4..v2.6.27-rc5 43.0% arch/arm/configs/ 25.5% arch/powerpc/configs/ 5.3% arch/ 4.4% drivers/usb/musb/ 4.0% drivers/watchdog/ 7.6% drivers/ 3.5% fs/ Spot the difference. In case anybody wonders: it's because of a ton of renames from {include/asm-blackfin => arch/blackfin/include/asm} that just totally messed up the file ordering in between arch/arm and arch/powerpc. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-29 07:19:08 +08:00
static int dirstat_compare(const void *_a, const void *_b)
{
const struct dirstat_file *a = _a;
const struct dirstat_file *b = _b;
return strcmp(a->name, b->name);
}
static void show_dirstat(struct diff_options *options)
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
{
int i;
unsigned long changed;
struct dirstat_dir dir;
struct diff_queue_struct *q = &diff_queued_diff;
dir.files = NULL;
dir.alloc = 0;
dir.nr = 0;
dir.permille = options->dirstat_permille;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
dir.cumulative = options->flags.dirstat_cumulative;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
changed = 0;
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
const char *name;
unsigned long copied, added, damage;
name = p->two->path ? p->two->path : p->one->path;
if (p->one->oid_valid && p->two->oid_valid &&
oideq(&p->one->oid, &p->two->oid)) {
/*
* The SHA1 has not changed, so pre-/post-content is
* identical. We can therefore skip looking at the
* file contents altogether.
*/
damage = 0;
goto found_damage;
}
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.dirstat_by_file) {
/*
* In --dirstat-by-file mode, we don't really need to
* look at the actual file contents at all.
* The fact that the SHA1 changed is enough for us to
* add this file to the list of results
* (with each file contributing equal damage).
*/
damage = 1;
goto found_damage;
}
if (DIFF_FILE_VALID(p->one) && DIFF_FILE_VALID(p->two)) {
diff_populate_filespec(options->repo, p->one, 0);
diff_populate_filespec(options->repo, p->two, 0);
diffcore_count_changes(options->repo,
p->one, p->two, NULL, NULL,
&copied, &added);
diff_free_filespec_data(p->one);
diff_free_filespec_data(p->two);
} else if (DIFF_FILE_VALID(p->one)) {
diff_populate_filespec(options->repo, p->one, CHECK_SIZE_ONLY);
copied = added = 0;
diff_free_filespec_data(p->one);
} else if (DIFF_FILE_VALID(p->two)) {
diff_populate_filespec(options->repo, p->two, CHECK_SIZE_ONLY);
copied = 0;
added = p->two->size;
diff_free_filespec_data(p->two);
} else
continue;
/*
* Original minus copied is the removed material,
* added is the new material. They are both damages
* made to the preimage.
* If the resulting damage is zero, we know that
* diffcore_count_changes() considers the two entries to
* be identical, but since the oid changed, we
* know that there must have been _some_ kind of change,
* so we force all entries to have damage > 0.
*/
damage = (p->one->size - copied) + added;
if (!damage)
damage = 1;
found_damage:
ALLOC_GROW(dir.files, dir.nr + 1, dir.alloc);
dir.files[dir.nr].name = name;
dir.files[dir.nr].changed = damage;
changed += damage;
dir.nr++;
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
}
/* This can happen even with many files, if everything was renames */
if (!changed)
return;
/* Show all directories with more than x% of the changes */
QSORT(dir.files, dir.nr, dirstat_compare);
gather_dirstat(options, &dir, changed, "", 0);
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
}
New --dirstat=lines mode, doing dirstat analysis based on diffstat This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:21 +08:00
static void show_dirstat_by_line(struct diffstat_t *data, struct diff_options *options)
{
int i;
unsigned long changed;
struct dirstat_dir dir;
if (data->nr == 0)
return;
dir.files = NULL;
dir.alloc = 0;
dir.nr = 0;
dir.permille = options->dirstat_permille;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
dir.cumulative = options->flags.dirstat_cumulative;
New --dirstat=lines mode, doing dirstat analysis based on diffstat This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:21 +08:00
changed = 0;
for (i = 0; i < data->nr; i++) {
struct diffstat_file *file = data->files[i];
unsigned long damage = file->added + file->deleted;
if (file->is_binary)
/*
* binary files counts bytes, not lines. Must find some
* way to normalize binary bytes vs. textual lines.
* The following heuristic assumes that there are 64
* bytes per "line".
* This is stupid and ugly, but very cheap...
*/
damage = DIV_ROUND_UP(damage, 64);
New --dirstat=lines mode, doing dirstat analysis based on diffstat This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:21 +08:00
ALLOC_GROW(dir.files, dir.nr + 1, dir.alloc);
dir.files[dir.nr].name = file->name;
dir.files[dir.nr].changed = damage;
changed += damage;
dir.nr++;
}
/* This can happen even with many files, if everything was renames */
if (!changed)
return;
/* Show all directories with more than x% of the changes */
QSORT(dir.files, dir.nr, dirstat_compare);
New --dirstat=lines mode, doing dirstat analysis based on diffstat This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:21 +08:00
gather_dirstat(options, &dir, changed, "", 0);
}
static void free_diffstat_info(struct diffstat_t *diffstat)
{
int i;
for (i = 0; i < diffstat->nr; i++) {
struct diffstat_file *f = diffstat->files[i];
free(f->print_name);
free(f->name);
free(f->from_name);
free(f);
}
free(diffstat->files);
}
struct checkdiff_t {
const char *filename;
int lineno;
int conflict_marker_size;
struct diff_options *o;
unsigned ws_rule;
unsigned status;
};
static int is_conflict_marker(const char *line, int marker_size, unsigned long len)
{
char firstchar;
int cnt;
if (len < marker_size + 1)
return 0;
firstchar = line[0];
switch (firstchar) {
case '=': case '>': case '<': case '|':
break;
default:
return 0;
}
for (cnt = 1; cnt < marker_size; cnt++)
if (line[cnt] != firstchar)
return 0;
/* line[1] thru line[marker_size-1] are same as firstchar */
if (len < marker_size + 1 || !isspace(line[marker_size]))
return 0;
return 1;
}
static void checkdiff_consume_hunk(void *priv,
long ob, long on, long nb, long nn,
const char *func, long funclen)
{
struct checkdiff_t *data = priv;
data->lineno = nb - 1;
}
static void checkdiff_consume(void *priv, char *line, unsigned long len)
{
struct checkdiff_t *data = priv;
int marker_size = data->conflict_marker_size;
const char *ws = diff_get_color(data->o->use_color, DIFF_WHITESPACE);
const char *reset = diff_get_color(data->o->use_color, DIFF_RESET);
const char *set = diff_get_color(data->o->use_color, DIFF_FILE_NEW);
char *err;
const char *line_prefix;
assert(data->o);
line_prefix = diff_line_prefix(data->o);
if (line[0] == '+') {
unsigned bad;
data->lineno++;
if (is_conflict_marker(line + 1, marker_size, len - 1)) {
data->status |= 1;
fprintf(data->o->file,
"%s%s:%d: leftover conflict marker\n",
line_prefix, data->filename, data->lineno);
}
bad = ws_check(line + 1, len - 1, data->ws_rule);
if (!bad)
return;
data->status |= bad;
err = whitespace_error_string(bad);
fprintf(data->o->file, "%s%s:%d: %s.\n",
line_prefix, data->filename, data->lineno, err);
free(err);
emit_line(data->o, set, reset, line, 1);
ws_check_emit(line + 1, len - 1, data->ws_rule,
data->o->file, set, reset, ws);
} else if (line[0] == ' ') {
data->lineno++;
}
}
static unsigned char *deflate_it(char *data,
unsigned long size,
unsigned long *result_size)
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
{
int bound;
unsigned char *deflated;
2011-06-11 02:52:15 +08:00
git_zstream stream;
git_deflate_init(&stream, zlib_compression_level);
bound = git_deflate_bound(&stream, size);
deflated = xmalloc(bound);
stream.next_out = deflated;
stream.avail_out = bound;
stream.next_in = (unsigned char *)data;
stream.avail_in = size;
while (git_deflate(&stream, Z_FINISH) == Z_OK)
; /* nothing */
git_deflate_end(&stream);
*result_size = stream.total_out;
return deflated;
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
}
static void emit_binary_diff_body(struct diff_options *o,
mmfile_t *one, mmfile_t *two)
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
{
void *cp;
void *delta;
void *deflated;
void *data;
unsigned long orig_size;
unsigned long delta_size;
unsigned long deflate_size;
unsigned long data_size;
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
/* We could do deflated delta, or we could do just deflated two,
* whichever is smaller.
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
*/
delta = NULL;
deflated = deflate_it(two->ptr, two->size, &deflate_size);
if (one->size && two->size) {
delta = diff_delta(one->ptr, one->size,
two->ptr, two->size,
&delta_size, deflate_size);
if (delta) {
void *to_free = delta;
orig_size = delta_size;
delta = deflate_it(delta, delta_size, &delta_size);
free(to_free);
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
}
}
if (delta && delta_size < deflate_size) {
char *s = xstrfmt("%"PRIuMAX , (uintmax_t)orig_size);
emit_diff_symbol(o, DIFF_SYMBOL_BINARY_DIFF_HEADER_DELTA,
s, strlen(s), 0);
free(s);
free(deflated);
data = delta;
data_size = delta_size;
} else {
char *s = xstrfmt("%lu", two->size);
emit_diff_symbol(o, DIFF_SYMBOL_BINARY_DIFF_HEADER_LITERAL,
s, strlen(s), 0);
free(s);
free(delta);
data = deflated;
data_size = deflate_size;
}
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
/* emit data encoded in base85 */
cp = data;
while (data_size) {
int len;
int bytes = (52 < data_size) ? 52 : data_size;
char line[71];
data_size -= bytes;
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
if (bytes <= 26)
line[0] = bytes + 'A' - 1;
else
line[0] = bytes - 26 + 'a' - 1;
encode_85(line + 1, cp, bytes);
cp = (char *) cp + bytes;
len = strlen(line);
line[len++] = '\n';
line[len] = '\0';
emit_diff_symbol(o, DIFF_SYMBOL_BINARY_DIFF_BODY,
line, len, 0);
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
}
emit_diff_symbol(o, DIFF_SYMBOL_BINARY_DIFF_FOOTER, NULL, 0, 0);
free(data);
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
}
static void emit_binary_diff(struct diff_options *o,
mmfile_t *one, mmfile_t *two)
{
emit_diff_symbol(o, DIFF_SYMBOL_BINARY_DIFF_HEADER, NULL, 0, 0);
emit_binary_diff_body(o, one, two);
emit_binary_diff_body(o, two, one);
}
int diff_filespec_is_binary(struct repository *r,
struct diff_filespec *one)
{
diff: introduce diff.<driver>.binary The "diff" gitattribute is somewhat overloaded right now. It can say one of three things: 1. this file is definitely binary, or definitely not (i.e., diff or !diff) 2. this file should use an external diff engine (i.e., diff=foo, diff.foo.command = custom-script) 3. this file should use particular funcname patterns (i.e., diff=foo, diff.foo.(x?)funcname = some-regex) Most of the time, there is no conflict between these uses, since using one implies that the other is irrelevant (e.g., an external diff engine will decide for itself whether the file is binary). However, there is at least one conflicting situation: there is no way to say "use the regular rules to determine whether this file is binary, but if we do diff it textually, use this funcname pattern." That is, currently setting diff=foo indicates that the file is definitely text. This patch introduces a "binary" config option for a diff driver, so that one can explicitly set diff.foo.binary. We default this value to "don't know". That is, setting a diff attribute to "foo" and using "diff.foo.funcname" will have no effect on the binaryness of a file. To get the current behavior, one can set diff.foo.binary to true. This patch also has one additional advantage: it cleans up the interface to the userdiff code a bit. Before, calling code had to know more about whether attributes were false, true, or unset to determine binaryness. Now that binaryness is a property of a driver, we can represent these situations just by passing back a driver struct. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-06 05:43:36 +08:00
if (one->is_binary == -1) {
diff_filespec_load_driver(one, r->index);
diff: introduce diff.<driver>.binary The "diff" gitattribute is somewhat overloaded right now. It can say one of three things: 1. this file is definitely binary, or definitely not (i.e., diff or !diff) 2. this file should use an external diff engine (i.e., diff=foo, diff.foo.command = custom-script) 3. this file should use particular funcname patterns (i.e., diff=foo, diff.foo.(x?)funcname = some-regex) Most of the time, there is no conflict between these uses, since using one implies that the other is irrelevant (e.g., an external diff engine will decide for itself whether the file is binary). However, there is at least one conflicting situation: there is no way to say "use the regular rules to determine whether this file is binary, but if we do diff it textually, use this funcname pattern." That is, currently setting diff=foo indicates that the file is definitely text. This patch introduces a "binary" config option for a diff driver, so that one can explicitly set diff.foo.binary. We default this value to "don't know". That is, setting a diff attribute to "foo" and using "diff.foo.funcname" will have no effect on the binaryness of a file. To get the current behavior, one can set diff.foo.binary to true. This patch also has one additional advantage: it cleans up the interface to the userdiff code a bit. Before, calling code had to know more about whether attributes were false, true, or unset to determine binaryness. Now that binaryness is a property of a driver, we can represent these situations just by passing back a driver struct. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-06 05:43:36 +08:00
if (one->driver->binary != -1)
one->is_binary = one->driver->binary;
else {
if (!one->data && DIFF_FILE_VALID(one))
diff_populate_filespec(r, one, CHECK_BINARY);
if (one->is_binary == -1 && one->data)
diff: introduce diff.<driver>.binary The "diff" gitattribute is somewhat overloaded right now. It can say one of three things: 1. this file is definitely binary, or definitely not (i.e., diff or !diff) 2. this file should use an external diff engine (i.e., diff=foo, diff.foo.command = custom-script) 3. this file should use particular funcname patterns (i.e., diff=foo, diff.foo.(x?)funcname = some-regex) Most of the time, there is no conflict between these uses, since using one implies that the other is irrelevant (e.g., an external diff engine will decide for itself whether the file is binary). However, there is at least one conflicting situation: there is no way to say "use the regular rules to determine whether this file is binary, but if we do diff it textually, use this funcname pattern." That is, currently setting diff=foo indicates that the file is definitely text. This patch introduces a "binary" config option for a diff driver, so that one can explicitly set diff.foo.binary. We default this value to "don't know". That is, setting a diff attribute to "foo" and using "diff.foo.funcname" will have no effect on the binaryness of a file. To get the current behavior, one can set diff.foo.binary to true. This patch also has one additional advantage: it cleans up the interface to the userdiff code a bit. Before, calling code had to know more about whether attributes were false, true, or unset to determine binaryness. Now that binaryness is a property of a driver, we can represent these situations just by passing back a driver struct. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-06 05:43:36 +08:00
one->is_binary = buffer_is_binary(one->data,
one->size);
if (one->is_binary == -1)
one->is_binary = 0;
}
}
return one->is_binary;
}
static const struct userdiff_funcname *
diff_funcname_pattern(struct diff_options *o, struct diff_filespec *one)
{
diff_filespec_load_driver(one, o->repo->index);
diff: introduce diff.<driver>.binary The "diff" gitattribute is somewhat overloaded right now. It can say one of three things: 1. this file is definitely binary, or definitely not (i.e., diff or !diff) 2. this file should use an external diff engine (i.e., diff=foo, diff.foo.command = custom-script) 3. this file should use particular funcname patterns (i.e., diff=foo, diff.foo.(x?)funcname = some-regex) Most of the time, there is no conflict between these uses, since using one implies that the other is irrelevant (e.g., an external diff engine will decide for itself whether the file is binary). However, there is at least one conflicting situation: there is no way to say "use the regular rules to determine whether this file is binary, but if we do diff it textually, use this funcname pattern." That is, currently setting diff=foo indicates that the file is definitely text. This patch introduces a "binary" config option for a diff driver, so that one can explicitly set diff.foo.binary. We default this value to "don't know". That is, setting a diff attribute to "foo" and using "diff.foo.funcname" will have no effect on the binaryness of a file. To get the current behavior, one can set diff.foo.binary to true. This patch also has one additional advantage: it cleans up the interface to the userdiff code a bit. Before, calling code had to know more about whether attributes were false, true, or unset to determine binaryness. Now that binaryness is a property of a driver, we can represent these situations just by passing back a driver struct. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-06 05:43:36 +08:00
return one->driver->funcname.pattern ? &one->driver->funcname : NULL;
}
void diff_set_mnemonic_prefix(struct diff_options *options, const char *a, const char *b)
{
if (!options->a_prefix)
options->a_prefix = a;
if (!options->b_prefix)
options->b_prefix = b;
}
struct userdiff_driver *get_textconv(struct repository *r,
struct diff_filespec *one)
{
if (!DIFF_FILE_VALID(one))
return NULL;
diff_filespec_load_driver(one, r->index);
return userdiff_get_textconv(r, one->driver);
}
static void builtin_diff(const char *name_a,
const char *name_b,
struct diff_filespec *one,
struct diff_filespec *two,
const char *xfrm_msg,
int must_show_header,
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
struct diff_options *o,
int complete_rewrite)
{
mmfile_t mf1, mf2;
const char *lbl[2];
char *a_one, *b_two;
const char *meta = diff_get_color_opt(o, DIFF_METAINFO);
const char *reset = diff_get_color_opt(o, DIFF_RESET);
const char *a_prefix, *b_prefix;
struct userdiff_driver *textconv_one = NULL;
struct userdiff_driver *textconv_two = NULL;
struct strbuf header = STRBUF_INIT;
const char *line_prefix = diff_line_prefix(o);
diff_set_mnemonic_prefix(o, "a/", "b/");
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (o->flags.reverse_diff) {
a_prefix = o->b_prefix;
b_prefix = o->a_prefix;
} else {
a_prefix = o->a_prefix;
b_prefix = o->b_prefix;
}
if (o->submodule_format == DIFF_SUBMODULE_LOG &&
(!one->mode || S_ISGITLINK(one->mode)) &&
(!two->mode || S_ISGITLINK(two->mode))) {
show_submodule_summary(o, one->path ? one->path : two->path,
&one->oid, &two->oid,
two->dirty_submodule);
return;
} else if (o->submodule_format == DIFF_SUBMODULE_INLINE_DIFF &&
(!one->mode || S_ISGITLINK(one->mode)) &&
(!two->mode || S_ISGITLINK(two->mode))) {
show_submodule_inline_diff(o, one->path ? one->path : two->path,
&one->oid, &two->oid,
two->dirty_submodule);
return;
}
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (o->flags.allow_textconv) {
textconv_one = get_textconv(o->repo, one);
textconv_two = get_textconv(o->repo, two);
}
fix bogus "diff --git" header from "diff --no-index" When "git diff --no-index" is given an absolute pathname, it would generate a diff header with the absolute path prepended by the prefix, like: diff --git a/dev/null b/foo Not only is this nonsensical, and not only does it violate the description of diffs given in git-diff(1), but it would produce broken binary diffs. Unlike text diffs, the binary diffs don't contain the filenames anywhere else, and so "git apply" relies on this header to figure out the filename. This patch just refuses to use an invalid name for anything visible in the diff. Now, this fixes the "git diff --no-index --binary a /dev/null" kind of case (and we'll end up using "a" as the basename), but some other insane cases are impossible to handle. If you do git diff --no-index --binary a /bin/echo you'll still get a patch like diff --git a/a b/bin/echo old mode 100644 new mode 100755 index ... and "git apply" will refuse to apply it for a couple of reasons, and the diff is simply bogus. And that, btw, is no longer a bug, I think. It's impossible to know whethe the user meant for the patch to be a rename or not. And as such, refusing to apply it because you don't know what name you should use is probably _exactly_ the right thing to do! Original problem reported by Imre Deak. Test script and problem description by Jeff King. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-06 03:35:15 +08:00
/* Never use a non-valid filename anywhere if at all possible */
name_a = DIFF_FILE_VALID(one) ? name_a : name_b;
name_b = DIFF_FILE_VALID(two) ? name_b : name_a;
a_one = quote_two(a_prefix, name_a + (*name_a == '/'));
b_two = quote_two(b_prefix, name_b + (*name_b == '/'));
lbl[0] = DIFF_FILE_VALID(one) ? a_one : "/dev/null";
lbl[1] = DIFF_FILE_VALID(two) ? b_two : "/dev/null";
strbuf_addf(&header, "%s%sdiff --git %s %s%s\n", line_prefix, meta, a_one, b_two, reset);
if (lbl[0][0] == '/') {
/* /dev/null */
strbuf_addf(&header, "%s%snew file mode %06o%s\n", line_prefix, meta, two->mode, reset);
if (xfrm_msg)
strbuf_addstr(&header, xfrm_msg);
must_show_header = 1;
}
else if (lbl[1][0] == '/') {
strbuf_addf(&header, "%s%sdeleted file mode %06o%s\n", line_prefix, meta, one->mode, reset);
if (xfrm_msg)
strbuf_addstr(&header, xfrm_msg);
must_show_header = 1;
}
else {
if (one->mode != two->mode) {
strbuf_addf(&header, "%s%sold mode %06o%s\n", line_prefix, meta, one->mode, reset);
strbuf_addf(&header, "%s%snew mode %06o%s\n", line_prefix, meta, two->mode, reset);
must_show_header = 1;
}
if (xfrm_msg)
strbuf_addstr(&header, xfrm_msg);
/*
* we do not run diff between different kind
* of objects.
*/
if ((one->mode ^ two->mode) & S_IFMT)
goto free_ab_and_return;
if (complete_rewrite &&
(textconv_one || !diff_filespec_is_binary(o->repo, one)) &&
(textconv_two || !diff_filespec_is_binary(o->repo, two))) {
emit_diff_symbol(o, DIFF_SYMBOL_HEADER,
header.buf, header.len, 0);
strbuf_reset(&header);
emit_rewrite_diff(name_a, name_b, one, two,
textconv_one, textconv_two, o);
o->found_changes = 1;
goto free_ab_and_return;
}
}
if (o->irreversible_delete && lbl[1][0] == '/') {
emit_diff_symbol(o, DIFF_SYMBOL_HEADER, header.buf,
header.len, 0);
strbuf_reset(&header);
goto free_ab_and_return;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
} else if (!o->flags.text &&
( (!textconv_one && diff_filespec_is_binary(o->repo, one)) ||
(!textconv_two && diff_filespec_is_binary(o->repo, two)) )) {
struct strbuf sb = STRBUF_INIT;
if (!one->data && !two->data &&
S_ISREG(one->mode) && S_ISREG(two->mode) &&
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
!o->flags.binary) {
if (oideq(&one->oid, &two->oid)) {
if (must_show_header)
emit_diff_symbol(o, DIFF_SYMBOL_HEADER,
header.buf, header.len,
0);
goto free_ab_and_return;
}
emit_diff_symbol(o, DIFF_SYMBOL_HEADER,
header.buf, header.len, 0);
strbuf_addf(&sb, "%sBinary files %s and %s differ\n",
diff_line_prefix(o), lbl[0], lbl[1]);
emit_diff_symbol(o, DIFF_SYMBOL_BINARY_FILES,
sb.buf, sb.len, 0);
strbuf_release(&sb);
goto free_ab_and_return;
}
if (fill_mmfile(o->repo, &mf1, one) < 0 ||
fill_mmfile(o->repo, &mf2, two) < 0)
diff: avoid useless filespec population builtin_diff calls fill_mmfile fairly early, which in turn calls diff_populate_filespec, which actually retrieves the file's blob contents into a buffer. Long ago, this was sensible as we would need to look at the blobs eventually. These days, however, we may not ever want those blobs if we end up using a textconv cache, and for large binary files (exactly the sort for which you might have a textconv cache), just retrieving the objects can be costly. This patch just pushes the fill_mmfile call a bit later, so we can avoid populating the filespec in some cases. There is one thing to note that looks like a bug but isn't. We push the fill_mmfile down into the first branch of a conditional. It seems like we would need it on the other branch, too, but we don't; fill_textconv does it for us (in fact, before this, we were just writing over the results of the fill_mmfile on that branch). Here's a timing sample on a commit with 45 changed jpgs and avis. The result is fully textconv cached, but we still wasted a lot of time just pulling the blobs from storage. The total size of the blobs (source and dest) is about 180M. [before] $ time git show >/dev/null real 0m0.352s user 0m0.148s sys 0m0.200s [after] $ time git show >/dev/null real 0m0.009s user 0m0.004s sys 0m0.004s And that's on a warm cache. On a cold cache, the "after" case is not much worse, but the "before" case has to do an extra 180M of I/O. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-02 08:14:24 +08:00
die("unable to read files to diff");
/* Quite common confusing case */
if (mf1.size == mf2.size &&
!memcmp(mf1.ptr, mf2.ptr, mf1.size)) {
if (must_show_header)
emit_diff_symbol(o, DIFF_SYMBOL_HEADER,
header.buf, header.len, 0);
goto free_ab_and_return;
}
emit_diff_symbol(o, DIFF_SYMBOL_HEADER, header.buf, header.len, 0);
strbuf_reset(&header);
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (o->flags.binary)
emit_binary_diff(o, &mf1, &mf2);
else {
strbuf_addf(&sb, "%sBinary files %s and %s differ\n",
diff_line_prefix(o), lbl[0], lbl[1]);
emit_diff_symbol(o, DIFF_SYMBOL_BINARY_FILES,
sb.buf, sb.len, 0);
strbuf_release(&sb);
}
o->found_changes = 1;
} else {
/* Crazy xdl interfaces.. */
const char *diffopts = getenv("GIT_DIFF_OPTS");
const char *v;
xpparam_t xpp;
xdemitconf_t xecfg;
struct emit_callback ecbdata;
const struct userdiff_funcname *pe;
diff -p: squelch "diff --git" header for stat-dirty paths The plumbing "diff" commands look at the working tree files without refreshing the index themselves for performance reasons (the calling script is expected to do that upfront just once, before calling one or more of them). In the early days of git, they showed the "diff --git" header before they actually ask the xdiff machinery to produce patches, and ended up showing only these headers if the real contents are the same and the difference they noticed was only because the stat info cached in the index did not match that of the working tree. It was too late for the implementation to take the header that it already emitted back. But 3e97c7c (No diff -b/-w output for all-whitespace changes, 2009-11-19) introduced necessary logic to keep the meta-information headers in a strbuf and delay their output until the xdiff machinery noticed actual changes. This was primarily in order to generate patches that ignore whitespaces. When operating under "-w" mode, we wouldn't know if the header is needed until we actually look at the resulting patch, so it was a sensible thing to do, but we did not realize that the same reasoning applies to stat-dirty paths. Later, 296c6bb (diff: fix "git show -C -C" output when renaming a binary file, 2010-05-26) generalized this machinery and added must_show_header toggle. This is turned on when the header must be shown even when there is no patch to be produced, e.g. only the mode was changed, or the path was renamed, without changing the contents. However, when it did so, it still kept the special case for the "-w" mode, which meant that the plumbing would keep showing these phantom changes. This corrects this historical inconsistency by allowing the plumbing to omit paths that are only stat-dirty from its output in the same way as it handles whitespace only changes under "-w" option. The change in the behaviour can be seen in the updated test. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01 10:14:16 +08:00
if (must_show_header) {
emit_diff_symbol(o, DIFF_SYMBOL_HEADER,
header.buf, header.len, 0);
strbuf_reset(&header);
}
mf1.size = fill_textconv(o->repo, textconv_one, one, &mf1.ptr);
mf2.size = fill_textconv(o->repo, textconv_two, two, &mf2.ptr);
pe = diff_funcname_pattern(o, one);
if (!pe)
pe = diff_funcname_pattern(o, two);
memset(&xpp, 0, sizeof(xpp));
memset(&xecfg, 0, sizeof(xecfg));
memset(&ecbdata, 0, sizeof(ecbdata));
if (o->flags.suppress_diff_headers)
lbl[0] = NULL;
ecbdata.label_path = lbl;
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
ecbdata.color_diff = want_color(o->use_color);
ecbdata.ws_rule = whitespace_rule(o->repo->index, name_b);
if (ecbdata.ws_rule & WS_BLANK_AT_EOF)
check_blank_at_eof(&mf1, &mf2, &ecbdata);
ecbdata.opt = o;
if (header.len && !o->flags.suppress_diff_headers)
ecbdata.header = &header;
xpp.flags = o->xdl_opts;
xpp.anchors = o->anchors;
xpp.anchors_nr = o->anchors_nr;
xecfg.ctxlen = o->context;
xecfg.interhunkctxlen = o->interhunkcontext;
xecfg.flags = XDL_EMIT_FUNCNAMES;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (o->flags.funccontext)
xecfg.flags |= XDL_EMIT_FUNCCONTEXT;
if (pe)
xdiff_set_find_func(&xecfg, pe->pattern, pe->cflags);
if (!diffopts)
;
else if (skip_prefix(diffopts, "--unified=", &v))
xecfg.ctxlen = strtoul(v, NULL, 10);
else if (skip_prefix(diffopts, "-u", &v))
xecfg.ctxlen = strtoul(v, NULL, 10);
if (o->word_diff)
init_diff_words_data(&ecbdata, o, one, two);
if (xdi_diff_outf(&mf1, &mf2, NULL, fn_out_consume,
&ecbdata, &xpp, &xecfg))
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 07:12:23 +08:00
die("unable to generate diff for %s", one->path);
if (o->word_diff)
free_diff_words_data(&ecbdata);
if (textconv_one)
free(mf1.ptr);
if (textconv_two)
free(mf2.ptr);
xdiff_clear_find_func(&xecfg);
}
free_ab_and_return:
strbuf_release(&header);
diff_free_filespec_data(one);
diff_free_filespec_data(two);
free(a_one);
free(b_two);
return;
}
static char *get_compact_summary(const struct diff_filepair *p, int is_renamed)
{
if (!is_renamed) {
if (p->status == DIFF_STATUS_ADDED) {
if (S_ISLNK(p->two->mode))
return "new +l";
else if ((p->two->mode & 0777) == 0755)
return "new +x";
else
return "new";
} else if (p->status == DIFF_STATUS_DELETED)
return "gone";
}
if (S_ISLNK(p->one->mode) && !S_ISLNK(p->two->mode))
return "mode -l";
else if (!S_ISLNK(p->one->mode) && S_ISLNK(p->two->mode))
return "mode +l";
else if ((p->one->mode & 0777) == 0644 &&
(p->two->mode & 0777) == 0755)
return "mode +x";
else if ((p->one->mode & 0777) == 0755 &&
(p->two->mode & 0777) == 0644)
return "mode -x";
return NULL;
}
static void builtin_diffstat(const char *name_a, const char *name_b,
struct diff_filespec *one,
struct diff_filespec *two,
struct diffstat_t *diffstat,
struct diff_options *o,
Fix "git diff --stat" for interesting - but empty - file changes The behavior of "git diff --stat" is rather odd for files that have zero lines of changes: it will discount them entirely unless they were renames. Which means that the stat output will simply not show files that only had "other" changes: they were created or deleted, or their mode was changed. Now, those changes do show up in the summary, but so do renames, so the diffstat logic is inconsistent. Why does it show renames with zero lines changed, but not mode changes or added files with zero lines changed? So change the logic to not check for "is_renamed", but for "is_interesting" instead, where "interesting" is judged to be any action but a pure data change (because a pure data change with zero data changed really isn't worth showing, if we ever get one in our diffpairs). So if you did chmod +x Makefile git diff --stat before, it would show empty (" 0 files changed"), with this it shows Makefile | 0 1 file changed, 0 insertions(+), 0 deletions(-) which I think is a more correct diffstat (and then with "--summary" it shows *what* the metadata change to Makefile was - this is completely consistent with our handling of renamed files). Side note: the old behavior was *really* odd. With no changes at all, "git diff --stat" output was empty. With just a chmod, it said "0 files changed". No way is our legacy behavior sane. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-18 01:00:37 +08:00
struct diff_filepair *p)
{
mmfile_t mf1, mf2;
struct diffstat_file *data;
int same_contents;
Fix "git diff --stat" for interesting - but empty - file changes The behavior of "git diff --stat" is rather odd for files that have zero lines of changes: it will discount them entirely unless they were renames. Which means that the stat output will simply not show files that only had "other" changes: they were created or deleted, or their mode was changed. Now, those changes do show up in the summary, but so do renames, so the diffstat logic is inconsistent. Why does it show renames with zero lines changed, but not mode changes or added files with zero lines changed? So change the logic to not check for "is_renamed", but for "is_interesting" instead, where "interesting" is judged to be any action but a pure data change (because a pure data change with zero data changed really isn't worth showing, if we ever get one in our diffpairs). So if you did chmod +x Makefile git diff --stat before, it would show empty (" 0 files changed"), with this it shows Makefile | 0 1 file changed, 0 insertions(+), 0 deletions(-) which I think is a more correct diffstat (and then with "--summary" it shows *what* the metadata change to Makefile was - this is completely consistent with our handling of renamed files). Side note: the old behavior was *really* odd. With no changes at all, "git diff --stat" output was empty. With just a chmod, it said "0 files changed". No way is our legacy behavior sane. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-18 01:00:37 +08:00
int complete_rewrite = 0;
if (!DIFF_PAIR_UNMERGED(p)) {
if (p->status == DIFF_STATUS_MODIFIED && p->score)
complete_rewrite = 1;
}
data = diffstat_add(diffstat, name_a, name_b);
data->is_interesting = p->status != DIFF_STATUS_UNKNOWN;
if (o->flags.stat_with_summary)
data->comments = get_compact_summary(p, data->is_renamed);
if (!one || !two) {
data->is_unmerged = 1;
return;
}
same_contents = oideq(&one->oid, &two->oid);
if (diff_filespec_is_binary(o->repo, one) ||
diff_filespec_is_binary(o->repo, two)) {
data->is_binary = 1;
if (same_contents) {
data->added = 0;
data->deleted = 0;
} else {
data->added = diff_filespec_size(o->repo, two);
data->deleted = diff_filespec_size(o->repo, one);
}
}
else if (complete_rewrite) {
diff_populate_filespec(o->repo, one, 0);
diff_populate_filespec(o->repo, two, 0);
data->deleted = count_lines(one->data, one->size);
data->added = count_lines(two->data, two->size);
}
else if (!same_contents) {
/* Crazy xdl interfaces.. */
xpparam_t xpp;
xdemitconf_t xecfg;
if (fill_mmfile(o->repo, &mf1, one) < 0 ||
fill_mmfile(o->repo, &mf2, two) < 0)
die("unable to read files to diff");
memset(&xpp, 0, sizeof(xpp));
memset(&xecfg, 0, sizeof(xecfg));
xpp.flags = o->xdl_opts;
xpp.anchors = o->anchors;
xpp.anchors_nr = o->anchors_nr;
xecfg.ctxlen = o->context;
xecfg.interhunkctxlen = o->interhunkcontext;
if (xdi_diff_outf(&mf1, &mf2, discard_hunk_line,
diffstat_consume, diffstat, &xpp, &xecfg))
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 07:12:23 +08:00
die("unable to generate diffstat for %s", one->path);
}
diff_free_filespec_data(one);
diff_free_filespec_data(two);
}
static void builtin_checkdiff(const char *name_a, const char *name_b,
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
const char *attr_path,
struct diff_filespec *one,
struct diff_filespec *two,
struct diff_options *o)
{
mmfile_t mf1, mf2;
struct checkdiff_t data;
if (!two)
return;
memset(&data, 0, sizeof(data));
data.filename = name_b ? name_b : name_a;
data.lineno = 0;
data.o = o;
data.ws_rule = whitespace_rule(o->repo->index, attr_path);
data.conflict_marker_size = ll_merge_marker_size(o->repo->index, attr_path);
if (fill_mmfile(o->repo, &mf1, one) < 0 ||
fill_mmfile(o->repo, &mf2, two) < 0)
die("unable to read files to diff");
/*
* All the other codepaths check both sides, but not checking
* the "old" side here is deliberate. We are checking the newly
* introduced changes, and as long as the "new" side is text, we
* can and should check what it introduces.
*/
if (diff_filespec_is_binary(o->repo, two))
goto free_and_return;
else {
/* Crazy xdl interfaces.. */
xpparam_t xpp;
xdemitconf_t xecfg;
memset(&xpp, 0, sizeof(xpp));
memset(&xecfg, 0, sizeof(xecfg));
xecfg.ctxlen = 1; /* at least one context line */
xpp.flags = 0;
if (xdi_diff_outf(&mf1, &mf2, checkdiff_consume_hunk,
checkdiff_consume, &data,
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 07:12:23 +08:00
&xpp, &xecfg))
die("unable to generate checkdiff for %s", one->path);
if (data.ws_rule & WS_BLANK_AT_EOF) {
struct emit_callback ecbdata;
int blank_at_eof;
ecbdata.ws_rule = data.ws_rule;
check_blank_at_eof(&mf1, &mf2, &ecbdata);
blank_at_eof = ecbdata.blank_at_eof_in_postimage;
if (blank_at_eof) {
static char *err;
if (!err)
err = whitespace_error_string(WS_BLANK_AT_EOF);
fprintf(o->file, "%s:%d: %s.\n",
data.filename, blank_at_eof, err);
data.status = 1; /* report errors */
}
}
}
free_and_return:
diff_free_filespec_data(one);
diff_free_filespec_data(two);
if (data.status)
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
o->flags.check_failed = 1;
}
struct diff_filespec *alloc_filespec(const char *path)
{
struct diff_filespec *spec;
FLEXPTR_ALLOC_STR(spec, path, path);
spec->count = 1;
diff: introduce diff.<driver>.binary The "diff" gitattribute is somewhat overloaded right now. It can say one of three things: 1. this file is definitely binary, or definitely not (i.e., diff or !diff) 2. this file should use an external diff engine (i.e., diff=foo, diff.foo.command = custom-script) 3. this file should use particular funcname patterns (i.e., diff=foo, diff.foo.(x?)funcname = some-regex) Most of the time, there is no conflict between these uses, since using one implies that the other is irrelevant (e.g., an external diff engine will decide for itself whether the file is binary). However, there is at least one conflicting situation: there is no way to say "use the regular rules to determine whether this file is binary, but if we do diff it textually, use this funcname pattern." That is, currently setting diff=foo indicates that the file is definitely text. This patch introduces a "binary" config option for a diff driver, so that one can explicitly set diff.foo.binary. We default this value to "don't know". That is, setting a diff attribute to "foo" and using "diff.foo.funcname" will have no effect on the binaryness of a file. To get the current behavior, one can set diff.foo.binary to true. This patch also has one additional advantage: it cleans up the interface to the userdiff code a bit. Before, calling code had to know more about whether attributes were false, true, or unset to determine binaryness. Now that binaryness is a property of a driver, we can represent these situations just by passing back a driver struct. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-06 05:43:36 +08:00
spec->is_binary = -1;
return spec;
}
void free_filespec(struct diff_filespec *spec)
{
if (!--spec->count) {
diff_free_filespec_data(spec);
free(spec);
}
}
void fill_filespec(struct diff_filespec *spec, const struct object_id *oid,
int oid_valid, unsigned short mode)
{
if (mode) {
spec->mode = canon_mode(mode);
oidcpy(&spec->oid, oid);
spec->oid_valid = oid_valid;
}
}
/*
* Given a name and sha1 pair, if the index tells us the file in
* the work tree has that object contents, return true, so that
* prepare_temp_file() does not have to inflate and extract.
*/
static int reuse_worktree_file(struct index_state *istate,
const char *name,
const struct object_id *oid,
int want_file)
{
Convert "struct cache_entry *" to "const ..." wherever possible I attempted to make index_state->cache[] a "const struct cache_entry **" to find out how existing entries in index are modified and where. The question I have is what do we do if we really need to keep track of on-disk changes in the index. The result is - diff-lib.c: setting CE_UPTODATE - name-hash.c: setting CE_HASHED - preload-index.c, read-cache.c, unpack-trees.c and builtin/update-index: obvious - entry.c: write_entry() may refresh the checked out entry via fill_stat_cache_info(). This causes "non-const struct cache_entry *" in builtin/apply.c, builtin/checkout-index.c and builtin/checkout.c - builtin/ls-files.c: --with-tree changes stagemask and may set CE_UPDATE Of these, write_entry() and its call sites are probably most interesting because it modifies on-disk info. But this is stat info and can be retrieved via refresh, at least for porcelain commands. Other just uses ce_flags for local purposes. So, keeping track of "dirty" entries is just a matter of setting a flag in index modification functions exposed by read-cache.c. Except unpack-trees, the rest of the code base does not do anything funny behind read-cache's back. The actual patch is less valueable than the summary above. But if anyone wants to re-identify the above sites. Applying this patch, then this: diff --git a/cache.h b/cache.h index 430d021..1692891 100644 --- a/cache.h +++ b/cache.h @@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode) #define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1) struct index_state { - struct cache_entry **cache; + const struct cache_entry **cache; unsigned int version; unsigned int cache_nr, cache_alloc, cache_changed; struct string_list *resolve_undo; will help quickly identify them without bogus warnings. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-09 23:29:00 +08:00
const struct cache_entry *ce;
struct stat st;
int pos, len;
/*
* We do not read the cache ourselves here, because the
* benchmark with my previous version that always reads cache
* shows that it makes things worse for diff-tree comparing
* two linux-2.6 kernel trees in an already checked out work
* tree. This is because most diff-tree comparisons deal with
* only a small number of files, while reading the cache is
* expensive for a large project, and its cost outweighs the
* savings we get by not inflating the object to a temporary
* file. Practically, this code only helps when we are used
* by diff-cache --cached, which does read the cache before
* calling us.
*/
if (!istate->cache)
return 0;
Avoid accessing a slow working copy during diffcore operations. The Cygwin folks have done a fine job at creating a POSIX layer on Windows That Just Works(tm). However it comes with a penalty; accessing files in the working tree by way of stat/open/mmap can be slower for diffcore than inflating the data from a blob which is stored in a packfile. This performance problem is especially an issue in merge-recursive when dealing with nearly 7000 added files, as we are loading each file's content from the working directory to perform rename detection. I have literally seen (and sadly watched) paint dry in less time than it takes for merge-recursive to finish such a merge. On the other hand this very same merge runs very fast on Solaris. If Git is compiled with NO_FAST_WORKING_DIRECTORY set then we will avoid looking at the working directory when the blob in question is available within a packfile and the caller doesn't need the data unpacked into a temporary file. We don't use loose objects as they have the same open/mmap/close costs as the working directory file access, but have the additional CPU overhead of needing to inflate the content before use. So it is still faster to use the working tree file over the loose object. If the caller needs the file data unpacked into a temporary file its likely because they are going to call an external diff program, passing the file as a parameter. In this case reusing the working tree file will be faster as we don't need to inflate the data and write it out to a temporary file. The NO_FAST_WORKING_DIRECTORY feature is enabled by default on Cygwin, as that is the platform which currently appears to benefit the most from this option. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-14 19:15:57 +08:00
/* We want to avoid the working directory if our caller
* doesn't need the data in a normal file, this system
* is rather slow with its stat/open/mmap/close syscalls,
* and the object is contained in a pack file. The pack
* is probably already open and will be faster to obtain
* the data through than the working directory. Loose
* objects however would tend to be slower as they need
* to be individually opened and inflated.
*/
if (!FAST_WORKING_DIRECTORY && !want_file && has_object_pack(oid))
Avoid accessing a slow working copy during diffcore operations. The Cygwin folks have done a fine job at creating a POSIX layer on Windows That Just Works(tm). However it comes with a penalty; accessing files in the working tree by way of stat/open/mmap can be slower for diffcore than inflating the data from a blob which is stored in a packfile. This performance problem is especially an issue in merge-recursive when dealing with nearly 7000 added files, as we are loading each file's content from the working directory to perform rename detection. I have literally seen (and sadly watched) paint dry in less time than it takes for merge-recursive to finish such a merge. On the other hand this very same merge runs very fast on Solaris. If Git is compiled with NO_FAST_WORKING_DIRECTORY set then we will avoid looking at the working directory when the blob in question is available within a packfile and the caller doesn't need the data unpacked into a temporary file. We don't use loose objects as they have the same open/mmap/close costs as the working directory file access, but have the additional CPU overhead of needing to inflate the content before use. So it is still faster to use the working tree file over the loose object. If the caller needs the file data unpacked into a temporary file its likely because they are going to call an external diff program, passing the file as a parameter. In this case reusing the working tree file will be faster as we don't need to inflate the data and write it out to a temporary file. The NO_FAST_WORKING_DIRECTORY feature is enabled by default on Cygwin, as that is the platform which currently appears to benefit the most from this option. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-14 19:15:57 +08:00
return 0;
/*
* Similarly, if we'd have to convert the file contents anyway, that
* makes the optimization not worthwhile.
*/
if (!want_file && would_convert_to_git(istate, name))
return 0;
len = strlen(name);
pos = index_name_pos(istate, name, len);
if (pos < 0)
return 0;
ce = istate->cache[pos];
/*
* This is not the sha1 we are looking for, or
* unreusable because it is not a regular file.
*/
if (!oideq(oid, &ce->oid) || !S_ISREG(ce->ce_mode))
return 0;
/*
* If ce is marked as "assume unchanged", there is no
* guarantee that work tree matches what we are looking for.
*/
if ((ce->ce_flags & CE_VALID) || ce_skip_worktree(ce))
return 0;
/*
* If ce matches the file in the work tree, we can reuse it.
*/
if (ce_uptodate(ce) ||
(!lstat(name, &st) && !ie_match_stat(istate, ce, &st, 0)))
return 1;
return 0;
}
static int diff_populate_gitlink(struct diff_filespec *s, int size_only)
{
struct strbuf buf = STRBUF_INIT;
char *dirty = "";
/* Are we looking at the work tree? */
if (s->dirty_submodule)
dirty = "-dirty";
strbuf_addf(&buf, "Subproject commit %s%s\n",
oid_to_hex(&s->oid), dirty);
s->size = buf.len;
if (size_only) {
s->data = NULL;
strbuf_release(&buf);
} else {
s->data = strbuf_detach(&buf, NULL);
s->should_free = 1;
}
return 0;
}
/*
* While doing rename detection and pickaxe operation, we may need to
* grab the data for the blob (or file) for our own in-core comparison.
* diff_filespec has data and size fields for this purpose.
*/
int diff_populate_filespec(struct repository *r,
struct diff_filespec *s,
unsigned int flags)
{
int size_only = flags & CHECK_SIZE_ONLY;
int err = 0;
int conv_flags = global_conv_flags_eol;
/*
* demote FAIL to WARN to allow inspecting the situation
* instead of refusing.
*/
if (conv_flags & CONV_EOL_RNDTRP_DIE)
conv_flags = CONV_EOL_RNDTRP_WARN;
if (!DIFF_FILE_VALID(s))
die("internal error: asking to populate invalid file.");
if (S_ISDIR(s->mode))
return -1;
if (s->data)
return 0;
if (size_only && 0 < s->size)
return 0;
if (S_ISGITLINK(s->mode))
return diff_populate_gitlink(s, size_only);
if (!s->oid_valid ||
reuse_worktree_file(r->index, s->path, &s->oid, 0)) {
struct strbuf buf = STRBUF_INIT;
struct stat st;
int fd;
Lazy man's auto-CRLF It currently does NOT know about file attributes, so it does its conversion purely based on content. Maybe that is more in the "git philosophy" anyway, since content is king, but I think we should try to do the file attributes to turn it off on demand. Anyway, BY DEFAULT it is off regardless, because it requires a [core] AutoCRLF = true in your config file to be enabled. We could make that the default for Windows, of course, the same way we do some other things (filemode etc). But you can actually enable it on UNIX, and it will cause: - "git update-index" will write blobs without CRLF - "git diff" will diff working tree files without CRLF - "git checkout" will write files to the working tree _with_ CRLF and things work fine. Funnily, it actually shows an odd file in git itself: git clone -n git test-crlf cd test-crlf git config core.autocrlf true git checkout git diff shows a diff for "Documentation/docbook-xsl.css". Why? Because we have actually checked in that file *with* CRLF! So when "core.autocrlf" is true, we'll always generate a *different* hash for it in the index, because the index hash will be for the content _without_ CRLF. Is this complete? I dunno. It seems to work for me. It doesn't use the filename at all right now, and that's probably a deficiency (we could certainly make the "is_binary()" heuristics also take standard filename heuristics into account). I don't pass in the filename at all for the "index_fd()" case (git-update-index), so that would need to be passed around, but this actually works fine. NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours truly. I will not guarantee that they work at all reasonable. Caveat emptor. But it _is_ simple, and it _is_ safe, since it's all off by default. The patch is pretty simple - the biggest part is the new "convert.c" file, but even that is really just basic stuff that anybody can write in "Teaching C 101" as a final project for their first class in programming. Not to say that it's bug-free, of course - but at least we're not talking about rocket surgery here. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-14 03:07:23 +08:00
if (lstat(s->path, &st) < 0) {
err_empty:
err = -1;
empty:
s->data = (char *)"";
s->size = 0;
return err;
}
s->size = xsize_t(st.st_size);
if (!s->size)
goto empty;
if (S_ISLNK(st.st_mode)) {
struct strbuf sb = STRBUF_INIT;
if (strbuf_readlink(&sb, s->path, s->size))
goto err_empty;
s->size = sb.len;
s->data = strbuf_detach(&sb, NULL);
s->should_free = 1;
return 0;
}
/*
* Even if the caller would be happy with getting
* only the size, we cannot return early at this
* point if the path requires us to run the content
* conversion.
*/
if (size_only && !would_convert_to_git(r->index, s->path))
return 0;
/*
* Note: this check uses xsize_t(st.st_size) that may
* not be the true size of the blob after it goes
* through convert_to_git(). This may not strictly be
* correct, but the whole point of big_file_threshold
* and is_binary check being that we want to avoid
* opening the file and inspecting the contents, this
* is probably fine.
*/
if ((flags & CHECK_BINARY) &&
s->size > big_file_threshold && s->is_binary == -1) {
s->is_binary = 1;
return 0;
}
fd = open(s->path, O_RDONLY);
if (fd < 0)
goto err_empty;
s->data = xmmap(NULL, s->size, PROT_READ, MAP_PRIVATE, fd, 0);
close(fd);
s->should_munmap = 1;
Lazy man's auto-CRLF It currently does NOT know about file attributes, so it does its conversion purely based on content. Maybe that is more in the "git philosophy" anyway, since content is king, but I think we should try to do the file attributes to turn it off on demand. Anyway, BY DEFAULT it is off regardless, because it requires a [core] AutoCRLF = true in your config file to be enabled. We could make that the default for Windows, of course, the same way we do some other things (filemode etc). But you can actually enable it on UNIX, and it will cause: - "git update-index" will write blobs without CRLF - "git diff" will diff working tree files without CRLF - "git checkout" will write files to the working tree _with_ CRLF and things work fine. Funnily, it actually shows an odd file in git itself: git clone -n git test-crlf cd test-crlf git config core.autocrlf true git checkout git diff shows a diff for "Documentation/docbook-xsl.css". Why? Because we have actually checked in that file *with* CRLF! So when "core.autocrlf" is true, we'll always generate a *different* hash for it in the index, because the index hash will be for the content _without_ CRLF. Is this complete? I dunno. It seems to work for me. It doesn't use the filename at all right now, and that's probably a deficiency (we could certainly make the "is_binary()" heuristics also take standard filename heuristics into account). I don't pass in the filename at all for the "index_fd()" case (git-update-index), so that would need to be passed around, but this actually works fine. NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours truly. I will not guarantee that they work at all reasonable. Caveat emptor. But it _is_ simple, and it _is_ safe, since it's all off by default. The patch is pretty simple - the biggest part is the new "convert.c" file, but even that is really just basic stuff that anybody can write in "Teaching C 101" as a final project for their first class in programming. Not to say that it's bug-free, of course - but at least we're not talking about rocket surgery here. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-14 03:07:23 +08:00
/*
* Convert from working tree format to canonical git format
*/
if (convert_to_git(r->index, s->path, s->data, s->size, &buf, conv_flags)) {
size_t size = 0;
Lazy man's auto-CRLF It currently does NOT know about file attributes, so it does its conversion purely based on content. Maybe that is more in the "git philosophy" anyway, since content is king, but I think we should try to do the file attributes to turn it off on demand. Anyway, BY DEFAULT it is off regardless, because it requires a [core] AutoCRLF = true in your config file to be enabled. We could make that the default for Windows, of course, the same way we do some other things (filemode etc). But you can actually enable it on UNIX, and it will cause: - "git update-index" will write blobs without CRLF - "git diff" will diff working tree files without CRLF - "git checkout" will write files to the working tree _with_ CRLF and things work fine. Funnily, it actually shows an odd file in git itself: git clone -n git test-crlf cd test-crlf git config core.autocrlf true git checkout git diff shows a diff for "Documentation/docbook-xsl.css". Why? Because we have actually checked in that file *with* CRLF! So when "core.autocrlf" is true, we'll always generate a *different* hash for it in the index, because the index hash will be for the content _without_ CRLF. Is this complete? I dunno. It seems to work for me. It doesn't use the filename at all right now, and that's probably a deficiency (we could certainly make the "is_binary()" heuristics also take standard filename heuristics into account). I don't pass in the filename at all for the "index_fd()" case (git-update-index), so that would need to be passed around, but this actually works fine. NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours truly. I will not guarantee that they work at all reasonable. Caveat emptor. But it _is_ simple, and it _is_ safe, since it's all off by default. The patch is pretty simple - the biggest part is the new "convert.c" file, but even that is really just basic stuff that anybody can write in "Teaching C 101" as a final project for their first class in programming. Not to say that it's bug-free, of course - but at least we're not talking about rocket surgery here. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-14 03:07:23 +08:00
munmap(s->data, s->size);
s->should_munmap = 0;
s->data = strbuf_detach(&buf, &size);
s->size = size;
Lazy man's auto-CRLF It currently does NOT know about file attributes, so it does its conversion purely based on content. Maybe that is more in the "git philosophy" anyway, since content is king, but I think we should try to do the file attributes to turn it off on demand. Anyway, BY DEFAULT it is off regardless, because it requires a [core] AutoCRLF = true in your config file to be enabled. We could make that the default for Windows, of course, the same way we do some other things (filemode etc). But you can actually enable it on UNIX, and it will cause: - "git update-index" will write blobs without CRLF - "git diff" will diff working tree files without CRLF - "git checkout" will write files to the working tree _with_ CRLF and things work fine. Funnily, it actually shows an odd file in git itself: git clone -n git test-crlf cd test-crlf git config core.autocrlf true git checkout git diff shows a diff for "Documentation/docbook-xsl.css". Why? Because we have actually checked in that file *with* CRLF! So when "core.autocrlf" is true, we'll always generate a *different* hash for it in the index, because the index hash will be for the content _without_ CRLF. Is this complete? I dunno. It seems to work for me. It doesn't use the filename at all right now, and that's probably a deficiency (we could certainly make the "is_binary()" heuristics also take standard filename heuristics into account). I don't pass in the filename at all for the "index_fd()" case (git-update-index), so that would need to be passed around, but this actually works fine. NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours truly. I will not guarantee that they work at all reasonable. Caveat emptor. But it _is_ simple, and it _is_ safe, since it's all off by default. The patch is pretty simple - the biggest part is the new "convert.c" file, but even that is really just basic stuff that anybody can write in "Teaching C 101" as a final project for their first class in programming. Not to say that it's bug-free, of course - but at least we're not talking about rocket surgery here. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-14 03:07:23 +08:00
s->should_free = 1;
}
}
else {
enum object_type type;
if (size_only || (flags & CHECK_BINARY)) {
type = oid_object_info(r, &s->oid, &s->size);
if (type < 0)
die("unable to read %s",
oid_to_hex(&s->oid));
if (size_only)
return 0;
if (s->size > big_file_threshold && s->is_binary == -1) {
s->is_binary = 1;
return 0;
}
}
s->data = read_object_file(&s->oid, &type, &s->size);
if (!s->data)
die("unable to read %s", oid_to_hex(&s->oid));
s->should_free = 1;
}
return 0;
}
void diff_free_filespec_blob(struct diff_filespec *s)
{
if (s->should_free)
free(s->data);
else if (s->should_munmap)
munmap(s->data, s->size);
if (s->should_free || s->should_munmap) {
s->should_free = s->should_munmap = 0;
s->data = NULL;
}
}
void diff_free_filespec_data(struct diff_filespec *s)
{
diff_free_filespec_blob(s);
FREE_AND_NULL(s->cnt_data);
}
static void prep_temp_blob(struct index_state *istate,
const char *path, struct diff_tempfile *temp,
void *blob,
unsigned long size,
const struct object_id *oid,
int mode)
{
struct strbuf buf = STRBUF_INIT;
struct strbuf tempfile = STRBUF_INIT;
char *path_dup = xstrdup(path);
const char *base = basename(path_dup);
/* Generate "XXXXXX_basename.ext" */
strbuf_addstr(&tempfile, "XXXXXX_");
strbuf_addstr(&tempfile, base);
temp->tempfile = mks_tempfile_ts(tempfile.buf, strlen(base) + 1);
tempfile: auto-allocate tempfiles on heap The previous commit taught the tempfile code to give up ownership over tempfiles that have been renamed or deleted. That makes it possible to use a stack variable like this: struct tempfile t; create_tempfile(&t, ...); ... if (!err) rename_tempfile(&t, ...); else delete_tempfile(&t); But doing it this way has a high potential for creating memory errors. The tempfile we pass to create_tempfile() ends up on a global linked list, and it's not safe for it to go out of scope until we've called one of those two deactivation functions. Imagine that we add an early return from the function that forgets to call delete_tempfile(). With a static or heap tempfile variable, the worst case is that the tempfile hangs around until the program exits (and some functions like setup_shallow_temporary rely on this intentionally, creating a tempfile and then leaving it for later cleanup). But with a stack variable as above, this is a serious memory error: the variable goes out of scope and may be filled with garbage by the time the tempfile code looks at it. Let's see if we can make it harder to get this wrong. Since many callers need to allocate arbitrary numbers of tempfiles, we can't rely on static storage as a general solution. So we need to turn to the heap. We could just ask all callers to pass us a heap variable, but that puts the burden on them to call free() at the right time. Instead, let's have the tempfile code handle the heap allocation _and_ the deallocation (when the tempfile is deactivated and removed from the list). This changes the return value of all of the creation functions. For the cleanup functions (delete and rename), we'll add one extra bit of safety: instead of taking a tempfile pointer, we'll take a pointer-to-pointer and set it to NULL after freeing the object. This makes it safe to double-call functions like delete_tempfile(), as the second call treats the NULL input as a noop. Several callsites follow this pattern. The resulting patch does have a fair bit of noise, as each caller needs to be converted to handle: 1. Storing a pointer instead of the struct itself. 2. Passing the pointer instead of taking the struct address. 3. Handling a "struct tempfile *" return instead of a file descriptor. We could play games to make this less noisy. For example, by defining the tempfile like this: struct tempfile { struct heap_allocated_part_of_tempfile { int fd; ...etc } *actual_data; } Callers would continue to have a "struct tempfile", and it would be "active" only when the inner pointer was non-NULL. But that just makes things more awkward in the long run. There aren't that many callers, so we can simply bite the bullet and adjust all of them. And the compiler makes it easy for us to find them all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-05 20:15:08 +08:00
if (!temp->tempfile)
die_errno("unable to create temp-file");
if (convert_to_working_tree(istate, path,
(const char *)blob, (size_t)size, &buf)) {
blob = buf.buf;
size = buf.len;
}
if (write_in_full(temp->tempfile->fd, blob, size) < 0 ||
tempfile: auto-allocate tempfiles on heap The previous commit taught the tempfile code to give up ownership over tempfiles that have been renamed or deleted. That makes it possible to use a stack variable like this: struct tempfile t; create_tempfile(&t, ...); ... if (!err) rename_tempfile(&t, ...); else delete_tempfile(&t); But doing it this way has a high potential for creating memory errors. The tempfile we pass to create_tempfile() ends up on a global linked list, and it's not safe for it to go out of scope until we've called one of those two deactivation functions. Imagine that we add an early return from the function that forgets to call delete_tempfile(). With a static or heap tempfile variable, the worst case is that the tempfile hangs around until the program exits (and some functions like setup_shallow_temporary rely on this intentionally, creating a tempfile and then leaving it for later cleanup). But with a stack variable as above, this is a serious memory error: the variable goes out of scope and may be filled with garbage by the time the tempfile code looks at it. Let's see if we can make it harder to get this wrong. Since many callers need to allocate arbitrary numbers of tempfiles, we can't rely on static storage as a general solution. So we need to turn to the heap. We could just ask all callers to pass us a heap variable, but that puts the burden on them to call free() at the right time. Instead, let's have the tempfile code handle the heap allocation _and_ the deallocation (when the tempfile is deactivated and removed from the list). This changes the return value of all of the creation functions. For the cleanup functions (delete and rename), we'll add one extra bit of safety: instead of taking a tempfile pointer, we'll take a pointer-to-pointer and set it to NULL after freeing the object. This makes it safe to double-call functions like delete_tempfile(), as the second call treats the NULL input as a noop. Several callsites follow this pattern. The resulting patch does have a fair bit of noise, as each caller needs to be converted to handle: 1. Storing a pointer instead of the struct itself. 2. Passing the pointer instead of taking the struct address. 3. Handling a "struct tempfile *" return instead of a file descriptor. We could play games to make this less noisy. For example, by defining the tempfile like this: struct tempfile { struct heap_allocated_part_of_tempfile { int fd; ...etc } *actual_data; } Callers would continue to have a "struct tempfile", and it would be "active" only when the inner pointer was non-NULL. But that just makes things more awkward in the long run. There aren't that many callers, so we can simply bite the bullet and adjust all of them. And the compiler makes it easy for us to find them all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-05 20:15:08 +08:00
close_tempfile_gently(temp->tempfile))
die_errno("unable to write temp-file");
tempfile: auto-allocate tempfiles on heap The previous commit taught the tempfile code to give up ownership over tempfiles that have been renamed or deleted. That makes it possible to use a stack variable like this: struct tempfile t; create_tempfile(&t, ...); ... if (!err) rename_tempfile(&t, ...); else delete_tempfile(&t); But doing it this way has a high potential for creating memory errors. The tempfile we pass to create_tempfile() ends up on a global linked list, and it's not safe for it to go out of scope until we've called one of those two deactivation functions. Imagine that we add an early return from the function that forgets to call delete_tempfile(). With a static or heap tempfile variable, the worst case is that the tempfile hangs around until the program exits (and some functions like setup_shallow_temporary rely on this intentionally, creating a tempfile and then leaving it for later cleanup). But with a stack variable as above, this is a serious memory error: the variable goes out of scope and may be filled with garbage by the time the tempfile code looks at it. Let's see if we can make it harder to get this wrong. Since many callers need to allocate arbitrary numbers of tempfiles, we can't rely on static storage as a general solution. So we need to turn to the heap. We could just ask all callers to pass us a heap variable, but that puts the burden on them to call free() at the right time. Instead, let's have the tempfile code handle the heap allocation _and_ the deallocation (when the tempfile is deactivated and removed from the list). This changes the return value of all of the creation functions. For the cleanup functions (delete and rename), we'll add one extra bit of safety: instead of taking a tempfile pointer, we'll take a pointer-to-pointer and set it to NULL after freeing the object. This makes it safe to double-call functions like delete_tempfile(), as the second call treats the NULL input as a noop. Several callsites follow this pattern. The resulting patch does have a fair bit of noise, as each caller needs to be converted to handle: 1. Storing a pointer instead of the struct itself. 2. Passing the pointer instead of taking the struct address. 3. Handling a "struct tempfile *" return instead of a file descriptor. We could play games to make this less noisy. For example, by defining the tempfile like this: struct tempfile { struct heap_allocated_part_of_tempfile { int fd; ...etc } *actual_data; } Callers would continue to have a "struct tempfile", and it would be "active" only when the inner pointer was non-NULL. But that just makes things more awkward in the long run. There aren't that many callers, so we can simply bite the bullet and adjust all of them. And the compiler makes it easy for us to find them all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-05 20:15:08 +08:00
temp->name = get_tempfile_path(temp->tempfile);
oid_to_hex_r(temp->hex, oid);
xsnprintf(temp->mode, sizeof(temp->mode), "%06o", mode);
strbuf_release(&buf);
strbuf_release(&tempfile);
free(path_dup);
}
static struct diff_tempfile *prepare_temp_file(struct repository *r,
const char *name,
struct diff_filespec *one)
{
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
struct diff_tempfile *temp = claim_diff_tempfile();
if (!DIFF_FILE_VALID(one)) {
not_a_valid_file:
/* A '-' entry produces this for file-2, and
* a '+' entry produces this for file-1.
*/
temp->name = "/dev/null";
xsnprintf(temp->hex, sizeof(temp->hex), ".");
xsnprintf(temp->mode, sizeof(temp->mode), ".");
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
return temp;
}
if (!S_ISGITLINK(one->mode) &&
(!one->oid_valid ||
reuse_worktree_file(r->index, name, &one->oid, 1))) {
struct stat st;
if (lstat(name, &st) < 0) {
if (errno == ENOENT)
goto not_a_valid_file;
die_errno("stat(%s)", name);
}
if (S_ISLNK(st.st_mode)) {
struct strbuf sb = STRBUF_INIT;
if (strbuf_readlink(&sb, name, st.st_size) < 0)
die_errno("readlink(%s)", name);
prep_temp_blob(r->index, name, temp, sb.buf, sb.len,
(one->oid_valid ?
&one->oid : &null_oid),
(one->oid_valid ?
one->mode : S_IFLNK));
strbuf_release(&sb);
}
else {
/* we can borrow from the file in the work tree */
temp->name = name;
if (!one->oid_valid)
oid_to_hex_r(temp->hex, &null_oid);
else
oid_to_hex_r(temp->hex, &one->oid);
/* Even though we may sometimes borrow the
* contents from the work tree, we always want
* one->mode. mode is trustworthy even when
* !(one->oid_valid), as long as
* DIFF_FILE_VALID(one).
*/
xsnprintf(temp->mode, sizeof(temp->mode), "%06o", one->mode);
}
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
return temp;
}
else {
if (diff_populate_filespec(r, one, 0))
die("cannot read data blob for %s", one->path);
prep_temp_blob(r->index, name, temp,
one->data, one->size,
&one->oid, one->mode);
}
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
return temp;
}
static void add_external_diff_name(struct repository *r,
struct argv_array *argv,
const char *name,
struct diff_filespec *df)
{
struct diff_tempfile *temp = prepare_temp_file(r, name, df);
argv_array_push(argv, temp->name);
argv_array_push(argv, temp->hex);
argv_array_push(argv, temp->mode);
}
/* An external diff command takes:
*
* diff-cmd name infile1 infile1-sha1 infile1-mode \
* infile2 infile2-sha1 infile2-mode [ rename-to ]
*
*/
static void run_external_diff(const char *pgm,
const char *name,
const char *other,
struct diff_filespec *one,
struct diff_filespec *two,
const char *xfrm_msg,
int complete_rewrite,
struct diff_options *o)
{
struct argv_array argv = ARGV_ARRAY_INIT;
struct argv_array env = ARGV_ARRAY_INIT;
struct diff_queue_struct *q = &diff_queued_diff;
argv_array_push(&argv, pgm);
argv_array_push(&argv, name);
if (one && two) {
add_external_diff_name(o->repo, &argv, name, one);
if (!other)
add_external_diff_name(o->repo, &argv, name, two);
else {
add_external_diff_name(o->repo, &argv, other, two);
argv_array_push(&argv, other);
argv_array_push(&argv, xfrm_msg);
}
}
argv_array_pushf(&env, "GIT_DIFF_PATH_COUNTER=%d", ++o->diff_path_counter);
argv_array_pushf(&env, "GIT_DIFF_PATH_TOTAL=%d", q->nr);
if (run_command_v_opt_cd_env(argv.argv, RUN_USING_SHELL, NULL, env.argv))
die(_("external diff died, stopping at %s"), name);
remove_tempfile();
argv_array_clear(&argv);
argv_array_clear(&env);
}
static int similarity_index(struct diff_filepair *p)
{
return p->score * 100 / MAX_SCORE;
}
static const char *diff_abbrev_oid(const struct object_id *oid, int abbrev)
{
if (startup_info->have_repository)
return find_unique_abbrev(oid, abbrev);
else {
char *hex = oid_to_hex(oid);
if (abbrev < 0)
abbrev = FALLBACK_DEFAULT_ABBREV;
if (abbrev > the_hash_algo->hexsz)
BUG("oid abbreviation out of range: %d", abbrev);
diff: handle --no-abbrev in no-index case There are two different places where the --no-abbrev option is parsed, and two different places where SHA-1s are abbreviated. We normally parse --no-abbrev with setup_revisions(), but in the no-index case, "git diff" calls diff_opt_parse() directly, and diff_opt_parse() didn't handle --no-abbrev until now. (It did handle --abbrev, however.) We normally abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff: handle sha1 abbreviations outside of repository, 2016-10-20) recently introduced a special case when you run "git diff" outside of a repository. setup_revisions() does also call diff_opt_parse(), but not for --abbrev or --no-abbrev, which it handles itself. setup_revisions() sets rev_info->abbrev, and later copies that to diff_options->abbrev. It handles --no-abbrev by setting abbrev to zero. (This change doesn't touch that.) Setting abbrev to zero was broken in the outside-of-a-repository special case, which until now resulted in a truly zero-length SHA-1, rather than taking zero to mean do not abbreviate. The only way to trigger this bug, however, was by running "git diff --raw" without either the --abbrev or --no-abbrev options, because 1) without --raw it doesn't respect abbrev (which is bizarre, but has been that way forever), 2) we silently clamp --abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until now. The outside-of-a-repository case is one of three no-index cases. The other two are when one of the files you're comparing is outside of the repository you're in, and the --no-index option. Signed-off-by: Jack Bates <jack@nottheoilrig.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 00:56:14 +08:00
if (abbrev)
hex[abbrev] = '\0';
return hex;
}
}
static void fill_metainfo(struct strbuf *msg,
const char *name,
const char *other,
struct diff_filespec *one,
struct diff_filespec *two,
struct diff_options *o,
struct diff_filepair *p,
int *must_show_header,
int use_color)
{
const char *set = diff_get_color(use_color, DIFF_METAINFO);
const char *reset = diff_get_color(use_color, DIFF_RESET);
const char *line_prefix = diff_line_prefix(o);
*must_show_header = 1;
strbuf_init(msg, PATH_MAX * 2 + 300);
switch (p->status) {
case DIFF_STATUS_COPIED:
strbuf_addf(msg, "%s%ssimilarity index %d%%",
line_prefix, set, similarity_index(p));
strbuf_addf(msg, "%s\n%s%scopy from ",
reset, line_prefix, set);
quote_c_style(name, msg, NULL, 0);
strbuf_addf(msg, "%s\n%s%scopy to ", reset, line_prefix, set);
quote_c_style(other, msg, NULL, 0);
strbuf_addf(msg, "%s\n", reset);
break;
case DIFF_STATUS_RENAMED:
strbuf_addf(msg, "%s%ssimilarity index %d%%",
line_prefix, set, similarity_index(p));
strbuf_addf(msg, "%s\n%s%srename from ",
reset, line_prefix, set);
quote_c_style(name, msg, NULL, 0);
strbuf_addf(msg, "%s\n%s%srename to ",
reset, line_prefix, set);
quote_c_style(other, msg, NULL, 0);
strbuf_addf(msg, "%s\n", reset);
break;
case DIFF_STATUS_MODIFIED:
if (p->score) {
strbuf_addf(msg, "%s%sdissimilarity index %d%%%s\n",
line_prefix,
set, similarity_index(p), reset);
break;
}
/* fallthru */
default:
*must_show_header = 0;
}
if (one && two && !oideq(&one->oid, &two->oid)) {
const unsigned hexsz = the_hash_algo->hexsz;
int abbrev = o->flags.full_index ? hexsz : DEFAULT_ABBREV;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (o->flags.binary) {
mmfile_t mf;
if ((!fill_mmfile(o->repo, &mf, one) &&
diff_filespec_is_binary(o->repo, one)) ||
(!fill_mmfile(o->repo, &mf, two) &&
diff_filespec_is_binary(o->repo, two)))
abbrev = hexsz;
}
strbuf_addf(msg, "%s%sindex %s..%s", line_prefix, set,
diff_abbrev_oid(&one->oid, abbrev),
diff_abbrev_oid(&two->oid, abbrev));
if (one->mode == two->mode)
strbuf_addf(msg, " %06o", one->mode);
strbuf_addf(msg, "%s\n", reset);
}
}
static void run_diff_cmd(const char *pgm,
const char *name,
const char *other,
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
const char *attr_path,
struct diff_filespec *one,
struct diff_filespec *two,
struct strbuf *msg,
binary patch. This adds "binary patch" to the diff output and teaches apply what to do with them. On the diff generation side, traditionally, we said "Binary files differ\n" without giving anything other than the preimage and postimage object name on the index line. This was good enough for applying a patch generated from your own repository (very useful while rebasing), because the postimage would be available in such a case. However, this was not useful when the recipient of such a patch via e-mail were to apply it, even if the preimage was available. This patch allows the diff to generate "binary" patch when operating under --full-index option. The binary patch follows the usual extended git diff headers, and looks like this: "GIT binary patch\n" <length byte><data>"\n" ... "\n" Each line is prefixed with a "length-byte", whose value is upper or lowercase alphabet that encodes number of bytes that the data on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ..., 'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of 5-byte sequence, each of which encodes up to 4 bytes in base85 encoding. Because 52 / 4 * 5 = 65 and we have the length byte, an output line is capped to 66 characters. The payload is the same diff-delta as we use in the packfiles. On the consumption side, git-apply now can decode and apply the binary patch when --allow-binary-replacement is given, the diff was generated with --full-index, and the receiving repository has the preimage blob, which is the same condition as it always required when accepting an "Binary files differ\n" patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 07:51:44 +08:00
struct diff_options *o,
struct diff_filepair *p)
{
const char *xfrm_msg = NULL;
int complete_rewrite = (p->status == DIFF_STATUS_MODIFIED) && p->score;
int must_show_header = 0;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (o->flags.allow_external) {
struct userdiff_driver *drv;
drv = userdiff_find_by_path(o->repo->index, attr_path);
if (drv && drv->external)
pgm = drv->external;
}
if (msg) {
/*
* don't use colors when the header is intended for an
* external diff driver
*/
fill_metainfo(msg, name, other, one, two, o, p,
&must_show_header,
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
want_color(o->use_color) && !pgm);
xfrm_msg = msg->len ? msg->buf : NULL;
}
if (pgm) {
run_external_diff(pgm, name, other, one, two, xfrm_msg,
complete_rewrite, o);
return;
}
if (one && two)
builtin_diff(name, other ? other : name,
one, two, xfrm_msg, must_show_header,
o, complete_rewrite);
else
fprintf(o->file, "* Unmerged path %s\n", name);
}
static void diff_fill_oid_info(struct diff_filespec *one, struct index_state *istate)
{
if (DIFF_FILE_VALID(one)) {
if (!one->oid_valid) {
struct stat st;
if (one->is_stdin) {
oidclr(&one->oid);
return;
}
if (lstat(one->path, &st) < 0)
die_errno("stat '%s'", one->path);
if (index_path(istate, &one->oid, one->path, &st, 0))
die("cannot hash %s", one->path);
}
}
else
oidclr(&one->oid);
}
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
static void strip_prefix(int prefix_length, const char **namep, const char **otherp)
{
/* Strip the prefix but do not molest /dev/null and absolute paths */
diff: don't attempt to strip prefix from absolute Windows paths git diff can be invoked with absolute paths. Typically, this triggers the --no-index case. Then the absolute paths remain in the file names that are printed in the output. There is one peculiarity, though: When the command is invoked from a a sub-directory in a repository, then it is attempted to strip the sub-directory from the beginning of relative paths. Yet, to detect a relative path the code just checks for an initial forward slash. This mistakes a Windows style path like "D:/base" as a relative path and the output looks like this, for example: D:\dir\test\one>git -P diff --numstat D:\dir\base D:\dir\diff 1 1 ir/{base => diff}/1.txt where the correct output should be D:\dir\test\one>git -P diff --numstat D:\dir\base D:\dir\diff 1 1 D:/dir/{base => diff}/1.txt If the sub-directory where 'git diff' is invoked is sufficiently deep that the prefix becomes longer than the path to be printed, then the subsequent code accesses the path out of bounds. Use is_absolute_path() to detect Windows style absolute paths. One might wonder whether the check for a directory separator that is visible in the patch context should be changed from == '/' to is_dir_sep() or not. It turns out not to be necessary. That code only ever investigates paths that have undergone pathspec normalization, after which there are only forward slashes even on Windows. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-20 00:58:07 +08:00
if (*namep && !is_absolute_path(*namep)) {
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
*namep += prefix_length;
if (**namep == '/')
++*namep;
}
diff: don't attempt to strip prefix from absolute Windows paths git diff can be invoked with absolute paths. Typically, this triggers the --no-index case. Then the absolute paths remain in the file names that are printed in the output. There is one peculiarity, though: When the command is invoked from a a sub-directory in a repository, then it is attempted to strip the sub-directory from the beginning of relative paths. Yet, to detect a relative path the code just checks for an initial forward slash. This mistakes a Windows style path like "D:/base" as a relative path and the output looks like this, for example: D:\dir\test\one>git -P diff --numstat D:\dir\base D:\dir\diff 1 1 ir/{base => diff}/1.txt where the correct output should be D:\dir\test\one>git -P diff --numstat D:\dir\base D:\dir\diff 1 1 D:/dir/{base => diff}/1.txt If the sub-directory where 'git diff' is invoked is sufficiently deep that the prefix becomes longer than the path to be printed, then the subsequent code accesses the path out of bounds. Use is_absolute_path() to detect Windows style absolute paths. One might wonder whether the check for a directory separator that is visible in the patch context should be changed from == '/' to is_dir_sep() or not. It turns out not to be necessary. That code only ever investigates paths that have undergone pathspec normalization, after which there are only forward slashes even on Windows. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-20 00:58:07 +08:00
if (*otherp && !is_absolute_path(*otherp)) {
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
*otherp += prefix_length;
if (**otherp == '/')
++*otherp;
}
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
}
static void run_diff(struct diff_filepair *p, struct diff_options *o)
{
const char *pgm = external_diff();
struct strbuf msg;
struct diff_filespec *one = p->one;
struct diff_filespec *two = p->two;
const char *name;
const char *other;
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
const char *attr_path;
name = one->path;
other = (strcmp(name, two->path) ? two->path : NULL);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
attr_path = name;
if (o->prefix_length)
strip_prefix(o->prefix_length, &name, &other);
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (!o->flags.allow_external)
pgm = NULL;
if (DIFF_PAIR_UNMERGED(p)) {
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
run_diff_cmd(pgm, name, NULL, attr_path,
NULL, NULL, NULL, o, p);
return;
}
diff_fill_oid_info(one, o->repo->index);
diff_fill_oid_info(two, o->repo->index);
if (!pgm &&
DIFF_FILE_VALID(one) && DIFF_FILE_VALID(two) &&
(S_IFMT & one->mode) != (S_IFMT & two->mode)) {
/*
* a filepair that changes between file and symlink
* needs to be split into deletion and creation.
*/
struct diff_filespec *null = alloc_filespec(two->path);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
run_diff_cmd(NULL, name, other, attr_path,
one, null, &msg,
o, p);
free(null);
strbuf_release(&msg);
null = alloc_filespec(one->path);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
run_diff_cmd(NULL, name, other, attr_path,
null, two, &msg, o, p);
free(null);
}
else
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
run_diff_cmd(pgm, name, other, attr_path,
one, two, &msg, o, p);
strbuf_release(&msg);
}
static void run_diffstat(struct diff_filepair *p, struct diff_options *o,
struct diffstat_t *diffstat)
{
const char *name;
const char *other;
if (DIFF_PAIR_UNMERGED(p)) {
/* unmerged */
builtin_diffstat(p->one->path, NULL, NULL, NULL,
diffstat, o, p);
return;
}
name = p->one->path;
other = (strcmp(name, p->two->path) ? p->two->path : NULL);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
if (o->prefix_length)
strip_prefix(o->prefix_length, &name, &other);
diff_fill_oid_info(p->one, o->repo->index);
diff_fill_oid_info(p->two, o->repo->index);
builtin_diffstat(name, other, p->one, p->two,
diffstat, o, p);
}
static void run_checkdiff(struct diff_filepair *p, struct diff_options *o)
{
const char *name;
const char *other;
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
const char *attr_path;
if (DIFF_PAIR_UNMERGED(p)) {
/* unmerged */
return;
}
name = p->one->path;
other = (strcmp(name, p->two->path) ? p->two->path : NULL);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
attr_path = other ? other : name;
if (o->prefix_length)
strip_prefix(o->prefix_length, &name, &other);
diff_fill_oid_info(p->one, o->repo->index);
diff_fill_oid_info(p->two, o->repo->index);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
builtin_checkdiff(name, other, attr_path, p->one, p->two, o);
}
static void prep_parse_options(struct diff_options *options);
void repo_diff_setup(struct repository *r, struct diff_options *options)
{
memcpy(options, &default_diff_options, sizeof(*options));
options->file = stdout;
options->repo = r;
options->output_indicators[OUTPUT_INDICATOR_NEW] = '+';
options->output_indicators[OUTPUT_INDICATOR_OLD] = '-';
options->output_indicators[OUTPUT_INDICATOR_CONTEXT] = ' ';
diff: handle --no-abbrev in no-index case There are two different places where the --no-abbrev option is parsed, and two different places where SHA-1s are abbreviated. We normally parse --no-abbrev with setup_revisions(), but in the no-index case, "git diff" calls diff_opt_parse() directly, and diff_opt_parse() didn't handle --no-abbrev until now. (It did handle --abbrev, however.) We normally abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff: handle sha1 abbreviations outside of repository, 2016-10-20) recently introduced a special case when you run "git diff" outside of a repository. setup_revisions() does also call diff_opt_parse(), but not for --abbrev or --no-abbrev, which it handles itself. setup_revisions() sets rev_info->abbrev, and later copies that to diff_options->abbrev. It handles --no-abbrev by setting abbrev to zero. (This change doesn't touch that.) Setting abbrev to zero was broken in the outside-of-a-repository special case, which until now resulted in a truly zero-length SHA-1, rather than taking zero to mean do not abbreviate. The only way to trigger this bug, however, was by running "git diff --raw" without either the --abbrev or --no-abbrev options, because 1) without --raw it doesn't respect abbrev (which is bizarre, but has been that way forever), 2) we silently clamp --abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until now. The outside-of-a-repository case is one of three no-index cases. The other two are when one of the files you're comparing is outside of the repository you're in, and the --no-index option. Signed-off-by: Jack Bates <jack@nottheoilrig.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 00:56:14 +08:00
options->abbrev = DEFAULT_ABBREV;
options->line_termination = '\n';
options->break_opt = -1;
options->rename_limit = -1;
options->dirstat_permille = diff_dirstat_permille_default;
options->context = diff_context_default;
options->interhunkcontext = diff_interhunk_context_default;
options->ws_error_highlight = ws_error_highlight_default;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.rename_empty = 1;
diffcore: add a pickaxe option to find a specific blob Sometimes users are given a hash of an object and they want to identify it further (ex.: Use verify-pack to find the largest blobs, but what are these? or [1]) One might be tempted to extend git-describe to also work with blobs, such that `git describe <blob-id>` gives a description as '<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer number of responses (>110), it turns out this is tricky to get right. The hard part to get right is picking the correct 'commit-ish' as that could be the commit that (re-)introduced the blob or the blob that removed the blob; the blob could exist in different branches. Junio hinted at a different approach of solving this problem, which this patch implements. Teach the diff machinery another flag for restricting the information to what is shown. For example: $ ./git log --oneline --find-object=v2.0.0:Makefile b2feb64309 Revert the whole "ask curl-config" topic for now 47fbfded53 i18n: only extract comments marked with "TRANSLATORS:" we observe that the Makefile as shipped with 2.0 was appeared in v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The reason why these commits both occur prior to v2.0.0 are evil merges that are not found using this new mechanism. [1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob [2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/ Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-05 06:50:42 +08:00
options->objfind = NULL;
tree-diff: rework diff_tree() to generate diffs for multiparent cases as well Previously diff_tree(), which is now named ll_diff_tree_sha1(), was generating diff_filepair(s) for two trees t1 and t2, and that was usually used for a commit as t1=HEAD~, and t2=HEAD - i.e. to see changes a commit introduces. In Git, however, we have fundamentally built flexibility in that a commit can have many parents - 1 for a plain commit, 2 for a simple merge, but also more than 2 for merging several heads at once. For merges there is a so called combine-diff, which shows diff, a merge introduces by itself, omitting changes done by any parent. That works through first finding paths, that are different to all parents, and then showing generalized diff, with separate columns for +/- for each parent. The code lives in combine-diff.c . There is an impedance mismatch, however, in that a commit could generally have any number of parents, and that while diffing trees, we divide cases for 2-tree diffs and more-than-2-tree diffs. I mean there is no special casing for multiple parents commits in e.g. revision-walker . That impedance mismatch *hurts* *performance* *badly* for generating combined diffs - in "combine-diff: optimize combine_diff_path sets intersection" I've already removed some slowness from it, but from the timings provided there, it could be seen, that combined diffs still cost more than an order of magnitude more cpu time, compared to diff for usual commits, and that would only be an optimistic estimate, if we take into account that for e.g. linux.git there is only one merge for several dozens of plain commits. That slowness comes from the fact that currently, while generating combined diff, a lot of time is spent computing diff(commit,commit^2) just to only then intersect that huge diff to almost small set of files from diff(commit,commit^1). That's because at present, to compute combine-diff, for first finding paths, that "every parent touches", we use the following combine-diff property/definition: D(A,P1...Pn) = D(A,P1) ^ ... ^ D(A,Pn) (w.r.t. paths) where D(A,P1...Pn) is combined diff between commit A, and parents Pi and D(A,Pi) is usual two-tree diff Pi..A So if any of that D(A,Pi) is huge, tracting 1 n-parent combine-diff as n 1-parent diffs and intersecting results will be slow. And usually, for linux.git and other topic-based workflows, that D(A,P2) is huge, because, if merge-base of A and P2, is several dozens of merges (from A, via first parent) below, that D(A,P2) will be diffing sum of merges from several subsystems to 1 subsystem. The solution is to avoid computing n 1-parent diffs, and to find changed-to-all-parents paths via scanning A's and all Pi's trees simultaneously, at each step comparing their entries, and based on that comparison, populate paths result, and deduce we could *skip* *recursing* into subdirectories, if at least for 1 parent, sha1 of that dir tree is the same as in A. That would save us from doing significant amount of needless work. Such approach is very similar to what diff_tree() does, only there we deal with scanning only 2 trees simultaneously, and for n+1 tree, the logic is a bit more complex: D(T,P1...Pn) calculation scheme ------------------------------- D(T,P1...Pn) = D(T,P1) ^ ... ^ D(T,Pn) (regarding resulting paths set) D(T,Pj) - diff between T..Pj D(T,P1...Pn) - combined diff from T to parents P1,...,Pn We start from all trees, which are sorted, and compare their entries in lock-step: T P1 Pn - - - |t| |p1| |pn| |-| |--| ... |--| imin = argmin(p1...pn) | | | | | | |-| |--| |--| |.| |. | |. | . . . . . . at any time there could be 3 cases: 1) t < p[imin]; 2) t > p[imin]; 3) t = p[imin]. Schematic deduction of what every case means, and what to do, follows: 1) t < p[imin] -> ∀j t ∉ Pj -> "+t" ∈ D(T,Pj) -> D += "+t"; t↓ 2) t > p[imin] 2.1) ∃j: pj > p[imin] -> "-p[imin]" ∉ D(T,Pj) -> D += ø; ∀ pi=p[imin] pi↓ 2.2) ∀i pi = p[imin] -> pi ∉ T -> "-pi" ∈ D(T,Pi) -> D += "-p[imin]"; ∀i pi↓ 3) t = p[imin] 3.1) ∃j: pj > p[imin] -> "+t" ∈ D(T,Pj) -> only pi=p[imin] remains to investigate 3.2) pi = p[imin] -> investigate δ(t,pi) | | v 3.1+3.2) looking at δ(t,pi) ∀i: pi=p[imin] - if all != ø -> ⎧δ(t,pi) - if pi=p[imin] -> D += ⎨ ⎩"+t" - if pi>p[imin] in any case t↓ ∀ pi=p[imin] pi↓ ~ For comparison, here is how diff_tree() works: D(A,B) calculation scheme ------------------------- A B - - |a| |b| a < b -> a ∉ B -> D(A,B) += +a a↓ |-| |-| a > b -> b ∉ A -> D(A,B) += -b b↓ | | | | a = b -> investigate δ(a,b) a↓ b↓ |-| |-| |.| |.| . . . . ~~~~~~~~ This patch generalizes diff tree-walker to work with arbitrary number of parents as described above - i.e. now there is a resulting tree t, and some parents trees tp[i] i=[0..nparent). The generalization builds on the fact that usual diff D(A,B) is by definition the same as combined diff D(A,[B]), so if we could rework the code for common case and make it be not slower for nparent=1 case, usual diff(t1,t2) generation will not be slower, and multiparent diff tree-walker would greatly benefit generating combine-diff. What we do is as follows: 1) diff tree-walker ll_diff_tree_sha1() is internally reworked to be a paths generator (new name diff_tree_paths()), with each generated path being `struct combine_diff_path` with info for path, new sha1,mode and for every parent which sha1,mode it was in it. 2) From that info, we can still generate usual diff queue with struct diff_filepairs, via "exporting" generated combine_diff_path, if we know we run for nparent=1 case. (see emit_diff() which is now named emit_diff_first_parent_only()) 3) In order for diff_can_quit_early(), which checks DIFF_OPT_TST(opt, HAS_CHANGES)) to work, that exporting have to be happening not in bulk, but incrementally, one diff path at a time. For such consumers, there is a new callback in diff_options introduced: ->pathchange(opt, struct combine_diff_path *) which, if set to !NULL, is called for every generated path. (see new compat ll_diff_tree_sha1() wrapper around new paths generator for setup) 4) The paths generation itself, is reworked from previous ll_diff_tree_sha1() code according to "D(A,P1...Pn) calculation scheme" provided above: On the start we allocate [nparent] arrays in place what was earlier just for one parent tree. then we just generalize loops, and comparison according to the algorithm. Some notes(*): 1) alloca(), for small arrays, is used for "runs not slower for nparent=1 case than before" goal - if we change it to xmalloc()/free() the timings get ~1% worse. For alloca() we use just-introduced xalloca/xalloca_free compatibility wrappers, so it should not be a portability problem. 2) For every parent tree, we need to keep a tag, whether entry from that parent equals to entry from minimal parent. For performance reasons I'm keeping that tag in entry's mode field in unused bit - see S_IFXMIN_NEQ. Not doing so, we'd need to alloca another [nparent] array, which hurts performance. 3) For emitted paths, memory could be reused, if we know the path was processed via callback and will not be needed later. We use efficient hand-made realloc-style path_appendnew(), that saves us from ~1-1.5% of potential additional slowdown. 4) goto(s) are used in several places, as the code executes a little bit faster with lowered register pressure. Also - we should now check for FIND_COPIES_HARDER not only when two entries names are the same, and their hashes are equal, but also for a case, when a path was removed from some of all parents having it. The reason is, if we don't, that path won't be emitted at all (see "a > xi" case), and we'll just skip it, and FIND_COPIES_HARDER wants all paths - with diff or without - to be emitted, to be later analyzed for being copies sources. The new check is only necessary for nparent >1, as for nparent=1 case xmin_eqtotal always =1 =nparent, and a path is always added to diff as removal. ~~~~~~~~ Timings for # without -c, i.e. testing only nparent=1 case `git log --raw --no-abbrev --no-renames` before and after the patch are as follows: navy.git linux.git v3.10..v3.11 before 0.611s 1.889s after 0.619s 1.907s slowdown 1.3% 0.9% This timings show we did no harm to usual diff(tree1,tree2) generation. From the table we can see that we actually did ~1% slowdown, but I think I've "earned" that 1% in the previous patch ("tree-diff: reuse base str(buf) memory on sub-tree recursion", HEAD~~) so for nparent=1 case, net timings stays approximately the same. The output also stayed the same. (*) If we revert 1)-4) to more usual techniques, for nparent=1 case, we'll get ~2-2.5% of additional slowdown, which I've tried to avoid, as "do no harm for nparent=1 case" rule. For linux.git, combined diff will run an order of magnitude faster and appropriate timings will be provided in the next commit, as we'll be taking advantage of the new diff tree-walker for combined-diff generation there. P.S. and combined diff is not some exotic/for-play-only stuff - for example for a program I write to represent Git archives as readonly filesystem, there is initial scan with `git log --reverse --raw --no-abbrev --no-renames -c` to extract log of what was created/changed when, as a result building a map {} sha1 -> in which commit (and date) a content was added that `-c` means also show combined diff for merges, and without them, if a merge is non-trivial (merges changes from two parents with both having separate changes to a file), or an evil one, the map will not be full, i.e. some valid sha1 would be absent from it. That case was my initial motivation for combined diffs speedup. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-07 05:46:26 +08:00
/* pathchange left =NULL by default */
options->change = diff_change;
options->add_remove = diff_addremove;
options->use_color = diff_use_color_default;
options->detect_rename = diff_detect_rename_default;
options->xdl_opts |= diff_algorithm;
diff: improve positioning of add/delete blocks in diffs Some groups of added/deleted lines in diffs can be slid up or down, because lines at the edges of the group are not unique. Picking good shifts for such groups is not a matter of correctness but definitely has a big effect on aesthetics. For example, consider the following two diffs. The first is what standard Git emits: --- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl +++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl @@ -231,6 +231,9 @@ if (!defined $initial_reply_to && $prompting) { } if (!$smtp_server) { + $smtp_server = $repo->config('sendemail.smtpserver'); +} +if (!$smtp_server) { foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) { if (-x $_) { $smtp_server = $_; The following diff is equivalent, but is obviously preferable from an aesthetic point of view: --- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl +++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl @@ -230,6 +230,9 @@ if (!defined $initial_reply_to && $prompting) { $initial_reply_to =~ s/(^\s+|\s+$)//g; } +if (!$smtp_server) { + $smtp_server = $repo->config('sendemail.smtpserver'); +} if (!$smtp_server) { foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) { if (-x $_) { This patch teaches Git to pick better positions for such "diff sliders" using heuristics that take the positions of nearby blank lines and the indentation of nearby lines into account. The existing Git code basically always shifts such "sliders" as far down in the file as possible. The only exception is when the slider can be aligned with a group of changed lines in the other file, in which case Git favors depicting the change as one add+delete block rather than one add and a slightly offset delete block. This naive algorithm often yields ugly diffs. Commit d634d61ed6 improved the situation somewhat by preferring to position add/delete groups to make their last line a blank line, when that is possible. This heuristic does more good than harm, but (1) it can only help if there are blank lines in the right places, and (2) always picks the last blank line, even if there are others that might be better. The end result is that it makes perhaps 1/3 as many errors as the default Git algorithm, but that still leaves a lot of ugly diffs. This commit implements a new and much better heuristic for picking optimal "slider" positions using the following approach: First observe that each hypothetical positioning of a diff slider introduces two splits: one between the context lines preceding the group and the first added/deleted line, and the other between the last added/deleted line and the first line of context following it. It tries to find the positioning that creates the least bad splits. Splits are evaluated based only on the presence and locations of nearby blank lines, and the indentation of lines near the split. Basically, it prefers to introduce splits adjacent to blank lines, between lines that are indented less, and between lines with the same level of indentation. In more detail: 1. It measures the following characteristics of a proposed splitting position in a `struct split_measurement`: * the number of blank lines above the proposed split * whether the line directly after the split is blank * the number of blank lines following that line * the indentation of the nearest non-blank line above the split * the indentation of the line directly below the split * the indentation of the nearest non-blank line after that line 2. It combines the measured attributes using a bunch of empirically-optimized weighting factors to derive a `struct split_score` that measures the "badness" of splitting the text at that position. 3. It combines the `split_score` for the top and the bottom of the slider at each of its possible positions, and selects the position that has the best `split_score`. I determined the initial set of weighting factors by collecting a corpus of Git histories from 29 open-source software projects in various programming languages. I generated many diffs from this corpus, and determined the best positioning "by eye" for about 6600 diff sliders. I used about half of the repositories in the corpus (corresponding to about 2/3 of the sliders) as a training set, and optimized the weights against this corpus using a crude automated search of the parameter space to get the best agreement with the manually-determined values. Then I tested the resulting heuristic against the full corpus. The results are summarized in the following table, in column `indent-1`: | repository | count | Git 2.9.0 | compaction | compaction-fixed | indent-1 | indent-2 | | --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- | | afnetworking | 109 | 89 (81.7%) | 37 (33.9%) | 37 (33.9%) | 2 (1.8%) | 2 (1.8%) | | alamofire | 30 | 18 (60.0%) | 14 (46.7%) | 15 (50.0%) | 0 (0.0%) | 0 (0.0%) | | angular | 184 | 127 (69.0%) | 39 (21.2%) | 23 (12.5%) | 5 (2.7%) | 5 (2.7%) | | animate | 313 | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | | ant | 380 | 356 (93.7%) | 152 (40.0%) | 148 (38.9%) | 15 (3.9%) | 15 (3.9%) | * | bugzilla | 306 | 263 (85.9%) | 109 (35.6%) | 99 (32.4%) | 14 (4.6%) | 15 (4.9%) | * | corefx | 126 | 91 (72.2%) | 22 (17.5%) | 21 (16.7%) | 6 (4.8%) | 6 (4.8%) | | couchdb | 78 | 44 (56.4%) | 26 (33.3%) | 28 (35.9%) | 6 (7.7%) | 6 (7.7%) | * | cpython | 937 | 158 (16.9%) | 50 (5.3%) | 49 (5.2%) | 5 (0.5%) | 5 (0.5%) | * | discourse | 160 | 95 (59.4%) | 42 (26.2%) | 36 (22.5%) | 18 (11.2%) | 13 (8.1%) | | docker | 307 | 194 (63.2%) | 198 (64.5%) | 253 (82.4%) | 8 (2.6%) | 8 (2.6%) | * | electron | 163 | 132 (81.0%) | 38 (23.3%) | 39 (23.9%) | 6 (3.7%) | 6 (3.7%) | | git | 536 | 470 (87.7%) | 73 (13.6%) | 78 (14.6%) | 16 (3.0%) | 16 (3.0%) | * | gitflow | 127 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | | ionic | 133 | 89 (66.9%) | 29 (21.8%) | 38 (28.6%) | 1 (0.8%) | 1 (0.8%) | | ipython | 482 | 362 (75.1%) | 167 (34.6%) | 169 (35.1%) | 11 (2.3%) | 11 (2.3%) | * | junit | 161 | 147 (91.3%) | 67 (41.6%) | 66 (41.0%) | 1 (0.6%) | 1 (0.6%) | * | lighttable | 15 | 5 (33.3%) | 0 (0.0%) | 2 (13.3%) | 0 (0.0%) | 0 (0.0%) | | magit | 88 | 75 (85.2%) | 11 (12.5%) | 9 (10.2%) | 1 (1.1%) | 0 (0.0%) | | neural-style | 28 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | | nodejs | 781 | 649 (83.1%) | 118 (15.1%) | 111 (14.2%) | 4 (0.5%) | 5 (0.6%) | * | phpmyadmin | 491 | 481 (98.0%) | 75 (15.3%) | 48 (9.8%) | 2 (0.4%) | 2 (0.4%) | * | react-native | 168 | 130 (77.4%) | 79 (47.0%) | 81 (48.2%) | 0 (0.0%) | 0 (0.0%) | | rust | 171 | 128 (74.9%) | 30 (17.5%) | 27 (15.8%) | 16 (9.4%) | 14 (8.2%) | | spark | 186 | 149 (80.1%) | 52 (28.0%) | 52 (28.0%) | 2 (1.1%) | 2 (1.1%) | | tensorflow | 115 | 66 (57.4%) | 48 (41.7%) | 48 (41.7%) | 5 (4.3%) | 5 (4.3%) | | test-more | 19 | 15 (78.9%) | 2 (10.5%) | 2 (10.5%) | 1 (5.3%) | 1 (5.3%) | * | test-unit | 51 | 34 (66.7%) | 14 (27.5%) | 8 (15.7%) | 2 (3.9%) | 2 (3.9%) | * | xmonad | 23 | 22 (95.7%) | 2 (8.7%) | 2 (8.7%) | 1 (4.3%) | 1 (4.3%) | * | --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- | | totals | 6668 | 4391 (65.9%) | 1496 (22.4%) | 1491 (22.4%) | 150 (2.2%) | 144 (2.2%) | | totals (training set) | 4552 | 3195 (70.2%) | 1053 (23.1%) | 1061 (23.3%) | 86 (1.9%) | 88 (1.9%) | | totals (test set) | 2116 | 1196 (56.5%) | 443 (20.9%) | 430 (20.3%) | 64 (3.0%) | 56 (2.6%) | In this table, the numbers are the count and percentage of human-rated sliders that the corresponding algorithm got *wrong*. The columns are * "repository" - the name of the repository used. I used the diffs between successive non-merge commits on the HEAD branch of the corresponding repository. * "count" - the number of sliders that were human-rated. I chose most, but not all, sliders to rate from those among which the various algorithms gave different answers. * "Git 2.9.0" - the default algorithm used by `git diff` in Git 2.9.0. * "compaction" - the heuristic used by `git diff --compaction-heuristic` in Git 2.9.0. * "compaction-fixed" - the heuristic used by `git diff --compaction-heuristic` after the fixes from earlier in this patch series. Note that the results are not dramatically different than those for "compaction". Both produce non-ideal diffs only about 1/3 as often as the default `git diff`. * "indent-1" - the new `--indent-heuristic` algorithm, using the first set of weighting factors, determined as described above. * "indent-2" - the new `--indent-heuristic` algorithm, using the final set of weighting factors, determined as described below. * `*` - indicates that repo was part of training set used to determine the first set of weighting factors. The fact that the heuristic performed nearly as well on the test set as on the training set in column "indent-1" is a good indication that the heuristic was not over-trained. Given that fact, I ran a second round of optimization, using the entire corpus as the training set. The resulting set of weights gave the results in column "indent-2". These are the weights included in this patch. The final result gives consistently and significantly better results across the whole corpus than either `git diff` or `git diff --compaction-heuristic`. It makes only about 1/30 as many errors as the former and about 1/10 as many errors as the latter. (And a good fraction of the remaining errors are for diffs that involve weirdly-formatted code, sometimes apparently machine-generated.) The tools that were used to do this optimization and analysis, along with the human-generated data values, are recorded in a separate project [1]. This patch adds a new command-line option `--indent-heuristic`, and a new configuration setting `diff.indentHeuristic`, that activate this heuristic. This interface is only meant for testing purposes, and should be finalized before including this change in any release. [1] https://github.com/mhagger/diff-slider-tools Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-05 17:44:51 +08:00
if (diff_indent_heuristic)
DIFF_XDL_SET(options, INDENT_HEURISTIC);
options->orderfile = diff_order_file_cfg;
if (diff_no_prefix) {
options->a_prefix = options->b_prefix = "";
} else if (!diff_mnemonic_prefix) {
options->a_prefix = "a/";
options->b_prefix = "b/";
}
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
options->color_moved = diff_color_moved_default;
options->color_moved_ws_handling = diff_color_moved_ws_default;
prep_parse_options(options);
}
void diff_setup_done(struct diff_options *options)
{
unsigned check_mask = DIFF_FORMAT_NAME |
DIFF_FORMAT_NAME_STATUS |
DIFF_FORMAT_CHECKDIFF |
DIFF_FORMAT_NO_OUTPUT;
/*
* This must be signed because we're comparing against a potentially
* negative value.
*/
const int hexsz = the_hash_algo->hexsz;
if (options->set_default)
options->set_default(options);
if (HAS_MULTI_BITS(options->output_format & check_mask))
die(_("--name-only, --name-status, --check and -s are mutually exclusive"));
if (HAS_MULTI_BITS(options->pickaxe_opts & DIFF_PICKAXE_KINDS_MASK))
die(_("-G, -S and --find-object are mutually exclusive"));
/*
* Most of the time we can say "there are changes"
* only by checking if there are changed paths, but
* --ignore-whitespace* options force us to look
* inside contents.
*/
if ((options->xdl_opts & XDF_WHITESPACE_FLAGS))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.diff_from_contents = 1;
else
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.diff_from_contents = 0;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.find_copies_harder)
options->detect_rename = DIFF_DETECT_COPY;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (!options->flags.relative_name)
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
options->prefix = NULL;
if (options->prefix)
options->prefix_length = strlen(options->prefix);
else
options->prefix_length = 0;
if (options->output_format & (DIFF_FORMAT_NAME |
DIFF_FORMAT_NAME_STATUS |
DIFF_FORMAT_CHECKDIFF |
DIFF_FORMAT_NO_OUTPUT))
options->output_format &= ~(DIFF_FORMAT_RAW |
DIFF_FORMAT_NUMSTAT |
DIFF_FORMAT_DIFFSTAT |
DIFF_FORMAT_SHORTSTAT |
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
DIFF_FORMAT_DIRSTAT |
DIFF_FORMAT_SUMMARY |
DIFF_FORMAT_PATCH);
/*
* These cases always need recursive; we do not drop caller-supplied
* recursive bits for other formats here.
*/
if (options->output_format & (DIFF_FORMAT_PATCH |
DIFF_FORMAT_NUMSTAT |
DIFF_FORMAT_DIFFSTAT |
DIFF_FORMAT_SHORTSTAT |
Add "--dirstat" for some directory statistics This adds a new form of overview diffstat output, doing something that I have occasionally ended up doing manually (and badly, because it's actually pretty nasty to do), and that I think is very useful for an project like the kernel that has a fairly deep and well-separated directory structure with semantic meaning. What I mean by that is that it's often interesting to see exactly which sub-directories are impacted by a patch, and to what degree - even if you don't perhaps care so much about the individual files themselves. What makes the concept more interesting is that the "impact" is often hierarchical: in the kernel, for example, something could either have a very localized impact to "fs/ext3/" and then it's interesting to see that such a patch changes mostly that subdirectory, but you could have another patch that changes some generic VFS-layer issue which affects _many_ subdirectories that are all under "fs/", but none - or perhaps just a couple of them - of the individual filesystems are interesting in themselves. So what commonly happens is that you may have big changes in a specific sub-subdirectory, but still also significant separate changes to the subdirectory leading up to that - maybe you have significant VFS-level changes, but *also* changes under that VFS layer in the NFS-specific directories, for example. In that case, you do want the low-level parts that are significant to show up, but then the insignificant ones should show up as under the more generic top-level directory. This patch shows all of that with "--dirstat". The output can be either something simple like commit 81772fe... Author: Thomas Gleixner <tglx@linutronix.de> Date: Sun Feb 10 23:57:36 2008 +0100 x86: remove over noisy debug printk pageattr-test.c contains a noisy debug printk that people reported. The condition under which it prints (randomly tapping into a mem_map[] hole and not being able to c_p_a() there) is valid behavior and not interesting to report. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 100.0% arch/x86/mm/ or something much more complex like commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 15.3% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ where that latter example is an example of significant work in some individual fs/*/ subdirectories (like the patches to reiserfs accounting for 7.6% of the whole), but then discounting those individual filesystems, there's also 15.3% other "random" things that weren't worth reporting on their oen left over under fs/ in general (either in that directory itself, or in subdirectories of fs/ that didn't have enough changes to be reported individually). I'd like to stress that the "15.3% fs/" mentioned above is the stuff that is under fs/ but that was _not_ significant enough to report on its own. So the above does _not_ mean that 15.3% of the work was under fs/ per se, because that 15.3% does *not* include the already-reported 7.6% of afs, 7.6% of fuse etc. If you want to enable "cumulative" directory statistics, you can use the "--cumulative" flag, which adds up percentages recursively even when they have been already reported for a sub-directory. That cumulative output is disabled if *all* of the changes in one subdirectory come from a deeper subdirectory, to avoid repeating subdirectories all the way to the root. For an example of the cumulative reporting, the above commit becomes commit e231c2e... Author: David Howells <dhowells@redhat.com> Date: Thu Feb 7 00:15:26 2008 -0800 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) 20.5% crypto/ 7.6% fs/afs/ 7.6% fs/fuse/ 7.6% fs/gfs2/ 5.1% fs/jffs2/ 5.1% fs/nfs/ 5.1% fs/nfsd/ 7.6% fs/reiserfs/ 61.5% fs/ 7.6% net/rxrpc/ 10.2% security/keys/ in which the commit percentages now obviously add up to much more than 100%: now the changes that were already reported for the sub-directories under fs/ are then cumulatively included in the whole percentage of fs/ (ie now shows 61.5% as opposed to the 15.3% without the cumulative reporting). The default reporting limit has been arbitrarily set at 3%, which seems to be a pretty good cut-off, but you can specify the cut-off manually by giving it as an option parameter (eg "--dirstat=5" makes the cut-off be at 5% instead) NOTE! The percentages are purely about the total lines added and removed, not anything smarter (or dumber) than that. Also note that you should not generally expect things to add up to 100%: not only does it round down, we don't report leftover scraps (they add up to the top-level change count, but we don't even bother reporting that, it only reports subdirectories). Quite frankly, as a top-level manager this is really convenient for me, but it's going to be very boring for git itself since there are few subdirectories. Also, don't expect things to make tons of sense if you combine this with "-M" and there are cross-directory renames etc. But even for git itself, you can get some fun statistics. Try out git log --dirstat and see the occasional mentions of things like Documentation/, git-gui/, gitweb/ and gitk-git/. Or try out something like git diff --dirstat v1.5.0..v1.5.4 which does kind of git an overview that shows *something*. But in general, the output is more exciting for big projects with deeper structure, and doing a git diff --dirstat v2.6.24..v2.6.25-rc1 on the kernel is what I actually wrote this for! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 05:26:31 +08:00
DIFF_FORMAT_DIRSTAT |
DIFF_FORMAT_SUMMARY |
DIFF_FORMAT_CHECKDIFF))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.recursive = 1;
/*
* Also pickaxe would not work very well if you do not say recursive
*/
if (options->pickaxe_opts & DIFF_PICKAXE_KINDS_MASK)
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.recursive = 1;
/*
* When patches are generated, submodules diffed against the work tree
* must be checked for dirtiness too so it can be shown in the output
*/
if (options->output_format & DIFF_FORMAT_PATCH)
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.dirty_submodules = 1;
if (options->detect_rename && options->rename_limit < 0)
options->rename_limit = diff_rename_limit_default;
if (hexsz < options->abbrev)
options->abbrev = hexsz; /* full */
/*
* It does not make sense to show the first hit we happened
* to have found. It does not make sense not to return with
* exit code in such a case either.
*/
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.quick) {
options->output_format = DIFF_FORMAT_NO_OUTPUT;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.exit_with_status = 1;
}
options->diff_path_counter = 0;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.follow_renames && options->pathspec.nr != 1)
die(_("--follow requires exactly one pathspec"));
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
if (!options->use_color || external_diff())
options->color_moved = 0;
FREE_AND_NULL(options->parseopts);
}
static int opt_arg(const char *arg, int arg_short, const char *arg_long, int *val)
{
char c, *eq;
int len;
if (*arg != '-')
return 0;
c = *++arg;
if (!c)
return 0;
if (c == arg_short) {
c = *++arg;
if (!c)
return 1;
if (val && isdigit(c)) {
char *end;
int n = strtoul(arg, &end, 10);
if (*end)
return 0;
*val = n;
return 1;
}
return 0;
}
if (c != '-')
return 0;
arg++;
eq = strchrnul(arg, '=');
len = eq - arg;
if (!len || strncmp(arg, arg_long, len))
return 0;
if (*eq) {
int n;
char *end;
if (!isdigit(*++eq))
return 0;
n = strtoul(eq, &end, 10);
if (*end)
return 0;
*val = n;
}
return 1;
}
static inline int short_opt(char opt, const char **argv,
const char **optarg)
{
const char *arg = argv[0];
if (arg[0] != '-' || arg[1] != opt)
return 0;
if (arg[2] != '\0') {
*optarg = arg + 2;
return 1;
}
if (!argv[1])
die("Option '%c' requires a value", opt);
*optarg = argv[1];
return 2;
}
int parse_long_opt(const char *opt, const char **argv,
const char **optarg)
{
const char *arg = argv[0];
if (!skip_prefix(arg, "--", &arg))
return 0;
if (!skip_prefix(arg, opt, &arg))
return 0;
if (*arg == '=') { /* stuck form: --option=value */
*optarg = arg + 1;
return 1;
}
if (*arg != '\0')
return 0;
/* separate form: --option value */
if (!argv[1])
die("Option '--%s' requires a value", opt);
*optarg = argv[1];
return 2;
}
static int diff_opt_stat(const struct option *opt, const char *value, int unset)
{
struct diff_options *options = opt->value;
int width = options->stat_width;
int name_width = options->stat_name_width;
int graph_width = options->stat_graph_width;
int count = options->stat_count;
char *end;
BUG_ON_OPT_NEG(unset);
if (!strcmp(opt->long_name, "stat")) {
if (value) {
width = strtoul(value, &end, 10);
if (*end == ',')
name_width = strtoul(end+1, &end, 10);
if (*end == ',')
count = strtoul(end+1, &end, 10);
if (*end)
return error(_("invalid --stat value: %s"), value);
}
} else if (!strcmp(opt->long_name, "stat-width")) {
width = strtoul(value, &end, 10);
if (*end)
return error(_("%s expects a numerical value"),
opt->long_name);
} else if (!strcmp(opt->long_name, "stat-name-width")) {
name_width = strtoul(value, &end, 10);
if (*end)
return error(_("%s expects a numerical value"),
opt->long_name);
} else if (!strcmp(opt->long_name, "stat-graph-width")) {
graph_width = strtoul(value, &end, 10);
if (*end)
return error(_("%s expects a numerical value"),
opt->long_name);
} else if (!strcmp(opt->long_name, "stat-count")) {
count = strtoul(value, &end, 10);
if (*end)
return error(_("%s expects a numerical value"),
opt->long_name);
} else
BUG("%s should not get here", opt->long_name);
options->output_format |= DIFF_FORMAT_DIFFSTAT;
options->stat_name_width = name_width;
options->stat_graph_width = graph_width;
options->stat_width = width;
options->stat_count = count;
return 0;
}
static int parse_dirstat_opt(struct diff_options *options, const char *params)
{
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
struct strbuf errmsg = STRBUF_INIT;
if (parse_dirstat_params(options, params, &errmsg))
die(_("Failed to parse --dirstat/-X option parameter:\n%s"),
Improve error handling when parsing dirstat parameters When encountering errors or unknown tokens while parsing parameters to the --dirstat option, it makes sense to die() with an error message informing the user of which parameter did not make sense. However, when parsing the diff.dirstat config variable, we cannot simply die(), but should instead (after warning the user) ignore the erroneous or unrecognized parameter. After all, future Git versions might add more dirstat parameters, and using two different Git versions on the same repo should not cripple the older Git version just because of a parameter that is only understood by a more recent Git version. This patch fixes the issue by refactoring the dirstat parameter parsing so that parse_dirstat_params() keeps on parsing parameters, even if an earlier parameter was not recognized. When parsing has finished, it returns zero if all parameters were successfully parsed, and non-zero if one or more parameters were not recognized (with appropriate error messages appended to the 'errmsg' argument). The parse_dirstat_params() callers then decide (based on the return value from parse_dirstat_params()) whether to warn and ignore (in case of diff.dirstat), or to warn and die (in case of --dirstat). The patch also adds a couple of tests verifying the correct behavior of --dirstat and diff.dirstat in the face of unknown (possibly future) dirstat parameters. Suggested-by: Junio C Hamano <gitster@pobox.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:22 +08:00
errmsg.buf);
strbuf_release(&errmsg);
/*
* The caller knows a dirstat-related option is given from the command
* line; allow it to say "return this_function();"
*/
options->output_format |= DIFF_FORMAT_DIRSTAT;
return 1;
}
static int parse_submodule_opt(struct diff_options *options, const char *value)
{
if (parse_submodule_params(options, value))
die(_("Failed to parse --submodule option parameter: '%s'"),
value);
return 1;
}
static const char diff_status_letters[] = {
DIFF_STATUS_ADDED,
DIFF_STATUS_COPIED,
DIFF_STATUS_DELETED,
DIFF_STATUS_MODIFIED,
DIFF_STATUS_RENAMED,
DIFF_STATUS_TYPE_CHANGED,
DIFF_STATUS_UNKNOWN,
DIFF_STATUS_UNMERGED,
DIFF_STATUS_FILTER_AON,
DIFF_STATUS_FILTER_BROKEN,
'\0',
};
static unsigned int filter_bit['Z' + 1];
static void prepare_filter_bits(void)
{
int i;
if (!filter_bit[DIFF_STATUS_ADDED]) {
for (i = 0; diff_status_letters[i]; i++)
filter_bit[(int) diff_status_letters[i]] = (1 << i);
}
}
static unsigned filter_bit_tst(char status, const struct diff_options *opt)
{
return opt->filter & filter_bit[(int) status];
}
static int parse_diff_filter_opt(const char *optarg, struct diff_options *opt)
{
int i, optch;
prepare_filter_bits();
/*
* If there is a negation e.g. 'd' in the input, and we haven't
* initialized the filter field with another --diff-filter, start
* from full set of bits, except for AON.
*/
if (!opt->filter) {
for (i = 0; (optch = optarg[i]) != '\0'; i++) {
if (optch < 'a' || 'z' < optch)
continue;
opt->filter = (1 << (ARRAY_SIZE(diff_status_letters) - 1)) - 1;
opt->filter &= ~filter_bit[DIFF_STATUS_FILTER_AON];
break;
}
}
for (i = 0; (optch = optarg[i]) != '\0'; i++) {
unsigned int bit;
int negate;
if ('a' <= optch && optch <= 'z') {
negate = 1;
optch = toupper(optch);
} else {
negate = 0;
}
bit = (0 <= optch && optch <= 'Z') ? filter_bit[optch] : 0;
if (!bit)
return optarg[i];
if (negate)
opt->filter &= ~bit;
else
opt->filter |= bit;
}
return 0;
}
static void enable_patch_output(int *fmt)
{
*fmt &= ~DIFF_FORMAT_NO_OUTPUT;
*fmt |= DIFF_FORMAT_PATCH;
}
static int parse_ws_error_highlight_opt(struct diff_options *opt, const char *arg)
{
int val = parse_ws_error_highlight(arg);
if (val < 0) {
error("unknown value after ws-error-highlight=%.*s",
-1 - val, arg);
return 0;
}
opt->ws_error_highlight = val;
return 1;
}
diffcore: add a pickaxe option to find a specific blob Sometimes users are given a hash of an object and they want to identify it further (ex.: Use verify-pack to find the largest blobs, but what are these? or [1]) One might be tempted to extend git-describe to also work with blobs, such that `git describe <blob-id>` gives a description as '<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer number of responses (>110), it turns out this is tricky to get right. The hard part to get right is picking the correct 'commit-ish' as that could be the commit that (re-)introduced the blob or the blob that removed the blob; the blob could exist in different branches. Junio hinted at a different approach of solving this problem, which this patch implements. Teach the diff machinery another flag for restricting the information to what is shown. For example: $ ./git log --oneline --find-object=v2.0.0:Makefile b2feb64309 Revert the whole "ask curl-config" topic for now 47fbfded53 i18n: only extract comments marked with "TRANSLATORS:" we observe that the Makefile as shipped with 2.0 was appeared in v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The reason why these commits both occur prior to v2.0.0 are evil merges that are not found using this new mechanism. [1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob [2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/ Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-05 06:50:42 +08:00
static int parse_objfind_opt(struct diff_options *opt, const char *arg)
{
struct object_id oid;
if (get_oid(arg, &oid))
return error("unable to resolve '%s'", arg);
if (!opt->objfind)
opt->objfind = xcalloc(1, sizeof(*opt->objfind));
opt->pickaxe_opts |= DIFF_PICKAXE_KIND_OBJFIND;
opt->flags.recursive = 1;
opt->flags.tree_in_recursive = 1;
oidset_insert(opt->objfind, &oid);
return 1;
}
static int diff_opt_anchored(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
BUG_ON_OPT_NEG(unset);
options->xdl_opts = DIFF_WITH_ALG(options, PATIENCE_DIFF);
ALLOC_GROW(options->anchors, options->anchors_nr + 1,
options->anchors_alloc);
options->anchors[options->anchors_nr++] = xstrdup(arg);
return 0;
}
static int diff_opt_binary(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
BUG_ON_OPT_NEG(unset);
BUG_ON_OPT_ARG(arg);
enable_patch_output(&options->output_format);
options->flags.binary = 1;
return 0;
}
static int diff_opt_break_rewrites(const struct option *opt,
const char *arg, int unset)
{
int *break_opt = opt->value;
int opt1, opt2;
BUG_ON_OPT_NEG(unset);
if (!arg)
arg = "";
opt1 = parse_rename_score(&arg);
if (*arg == 0)
opt2 = 0;
else if (*arg != '/')
return error(_("%s expects <n>/<m> form"), opt->long_name);
else {
arg++;
opt2 = parse_rename_score(&arg);
}
if (*arg != 0)
return error(_("%s expects <n>/<m> form"), opt->long_name);
*break_opt = opt1 | (opt2 << 16);
return 0;
}
static int diff_opt_char(const struct option *opt,
const char *arg, int unset)
{
char *value = opt->value;
BUG_ON_OPT_NEG(unset);
if (arg[1])
return error(_("%s expects a character, got '%s'"),
opt->long_name, arg);
*value = arg[0];
return 0;
}
static int diff_opt_compact_summary(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
BUG_ON_OPT_ARG(arg);
if (unset) {
options->flags.stat_with_summary = 0;
} else {
options->flags.stat_with_summary = 1;
options->output_format |= DIFF_FORMAT_DIFFSTAT;
}
return 0;
}
static int diff_opt_diff_algorithm(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
long value = parse_algorithm_value(arg);
BUG_ON_OPT_NEG(unset);
if (value < 0)
return error(_("option diff-algorithm accepts \"myers\", "
"\"minimal\", \"patience\" and \"histogram\""));
/* clear out previous settings */
DIFF_XDL_CLR(options, NEED_MINIMAL);
options->xdl_opts &= ~XDF_DIFF_ALGORITHM_MASK;
options->xdl_opts |= value;
return 0;
}
static int diff_opt_dirstat(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
BUG_ON_OPT_NEG(unset);
if (!strcmp(opt->long_name, "cumulative")) {
if (arg)
BUG("how come --cumulative take a value?");
arg = "cumulative";
} else if (!strcmp(opt->long_name, "dirstat-by-file"))
parse_dirstat_opt(options, "files");
parse_dirstat_opt(options, arg ? arg : "");
return 0;
}
static int diff_opt_find_copies(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
BUG_ON_OPT_NEG(unset);
if (!arg)
arg = "";
options->rename_score = parse_rename_score(&arg);
if (*arg != 0)
return error(_("invalid argument to %s"), opt->long_name);
if (options->detect_rename == DIFF_DETECT_COPY)
options->flags.find_copies_harder = 1;
else
options->detect_rename = DIFF_DETECT_COPY;
return 0;
}
static int diff_opt_find_renames(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
BUG_ON_OPT_NEG(unset);
if (!arg)
arg = "";
options->rename_score = parse_rename_score(&arg);
if (*arg != 0)
return error(_("invalid argument to %s"), opt->long_name);
options->detect_rename = DIFF_DETECT_RENAME;
return 0;
}
static enum parse_opt_result diff_opt_output(struct parse_opt_ctx_t *ctx,
const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
char *path;
BUG_ON_OPT_NEG(unset);
path = prefix_filename(ctx->prefix, arg);
options->file = xfopen(path, "w");
options->close_file = 1;
if (options->use_color != GIT_COLOR_ALWAYS)
options->use_color = GIT_COLOR_NEVER;
free(path);
return 0;
}
static int diff_opt_patience(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
int i;
BUG_ON_OPT_NEG(unset);
BUG_ON_OPT_ARG(arg);
options->xdl_opts = DIFF_WITH_ALG(options, PATIENCE_DIFF);
/*
* Both --patience and --anchored use PATIENCE_DIFF
* internally, so remove any anchors previously
* specified.
*/
for (i = 0; i < options->anchors_nr; i++)
free(options->anchors[i]);
options->anchors_nr = 0;
return 0;
}
static int diff_opt_relative(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
BUG_ON_OPT_NEG(unset);
options->flags.relative_name = 1;
if (arg)
options->prefix = arg;
return 0;
}
static int diff_opt_unified(const struct option *opt,
const char *arg, int unset)
{
struct diff_options *options = opt->value;
char *s;
BUG_ON_OPT_NEG(unset);
options->context = strtol(arg, &s, 10);
if (*s)
return error(_("%s expects a numerical value"), "--unified");
enable_patch_output(&options->output_format);
return 0;
}
static void prep_parse_options(struct diff_options *options)
{
struct option parseopts[] = {
OPT_GROUP(N_("Diff output format options")),
OPT_BITOP('p', "patch", &options->output_format,
N_("generate patch"),
DIFF_FORMAT_PATCH, DIFF_FORMAT_NO_OUTPUT),
OPT_BIT_F('s', "no-patch", &options->output_format,
N_("suppress diff output"),
DIFF_FORMAT_NO_OUTPUT, PARSE_OPT_NONEG),
OPT_BITOP('u', NULL, &options->output_format,
N_("generate patch"),
DIFF_FORMAT_PATCH, DIFF_FORMAT_NO_OUTPUT),
OPT_CALLBACK_F('U', "unified", options, N_("<n>"),
N_("generate diffs with <n> lines context"),
PARSE_OPT_NONEG, diff_opt_unified),
OPT_BOOL('W', "function-context", &options->flags.funccontext,
N_("generate diffs with <n> lines context")),
OPT_BIT_F(0, "raw", &options->output_format,
N_("generate the diff in raw format"),
DIFF_FORMAT_RAW, PARSE_OPT_NONEG),
OPT_BITOP(0, "patch-with-raw", &options->output_format,
N_("synonym for '-p --raw'"),
DIFF_FORMAT_PATCH | DIFF_FORMAT_RAW,
DIFF_FORMAT_NO_OUTPUT),
OPT_BITOP(0, "patch-with-stat", &options->output_format,
N_("synonym for '-p --stat'"),
DIFF_FORMAT_PATCH | DIFF_FORMAT_DIFFSTAT,
DIFF_FORMAT_NO_OUTPUT),
OPT_BIT_F(0, "numstat", &options->output_format,
N_("machine friendly --stat"),
DIFF_FORMAT_NUMSTAT, PARSE_OPT_NONEG),
OPT_BIT_F(0, "shortstat", &options->output_format,
N_("output only the last line of --stat"),
DIFF_FORMAT_SHORTSTAT, PARSE_OPT_NONEG),
OPT_CALLBACK_F('X', "dirstat", options, N_("<param1,param2>..."),
N_("output the distribution of relative amount of changes for each sub-directory"),
PARSE_OPT_NONEG | PARSE_OPT_OPTARG,
diff_opt_dirstat),
OPT_CALLBACK_F(0, "cumulative", options, NULL,
N_("synonym for --dirstat=cumulative"),
PARSE_OPT_NONEG | PARSE_OPT_NOARG,
diff_opt_dirstat),
OPT_CALLBACK_F(0, "dirstat-by-file", options, N_("<param1,param2>..."),
N_("synonym for --dirstat=files,param1,param2..."),
PARSE_OPT_NONEG | PARSE_OPT_OPTARG,
diff_opt_dirstat),
OPT_BIT_F(0, "check", &options->output_format,
N_("warn if changes introduce conflict markers or whitespace errors"),
DIFF_FORMAT_CHECKDIFF, PARSE_OPT_NONEG),
OPT_BIT_F(0, "summary", &options->output_format,
N_("condensed summary such as creations, renames and mode changes"),
DIFF_FORMAT_SUMMARY, PARSE_OPT_NONEG),
OPT_BIT_F(0, "name-only", &options->output_format,
N_("show only names of changed files"),
DIFF_FORMAT_NAME, PARSE_OPT_NONEG),
OPT_BIT_F(0, "name-status", &options->output_format,
N_("show only names and status of changed files"),
DIFF_FORMAT_NAME_STATUS, PARSE_OPT_NONEG),
OPT_CALLBACK_F(0, "stat", options, N_("<width>[,<name-width>[,<count>]]"),
N_("generate diffstat"),
PARSE_OPT_NONEG | PARSE_OPT_OPTARG, diff_opt_stat),
OPT_CALLBACK_F(0, "stat-width", options, N_("<width>"),
N_("generate diffstat with a given width"),
PARSE_OPT_NONEG, diff_opt_stat),
OPT_CALLBACK_F(0, "stat-name-width", options, N_("<width>"),
N_("generate diffstat with a given name width"),
PARSE_OPT_NONEG, diff_opt_stat),
OPT_CALLBACK_F(0, "stat-graph-width", options, N_("<width>"),
N_("generate diffstat with a given graph width"),
PARSE_OPT_NONEG, diff_opt_stat),
OPT_CALLBACK_F(0, "stat-count", options, N_("<count>"),
N_("generate diffstat with limited lines"),
PARSE_OPT_NONEG, diff_opt_stat),
OPT_CALLBACK_F(0, "compact-summary", options, NULL,
N_("generate compact summary in diffstat"),
PARSE_OPT_NOARG, diff_opt_compact_summary),
OPT_CALLBACK_F(0, "binary", options, NULL,
N_("output a binary diff that can be applied"),
PARSE_OPT_NONEG | PARSE_OPT_NOARG, diff_opt_binary),
OPT_BOOL(0, "full-index", &options->flags.full_index,
N_("show full pre- and post-image object names on the \"index\" lines")),
OPT_CALLBACK_F(0, "output-indicator-new",
&options->output_indicators[OUTPUT_INDICATOR_NEW],
N_("<char>"),
N_("specify the character to indicate a new line instead of '+'"),
PARSE_OPT_NONEG, diff_opt_char),
OPT_CALLBACK_F(0, "output-indicator-old",
&options->output_indicators[OUTPUT_INDICATOR_OLD],
N_("<char>"),
N_("specify the character to indicate an old line instead of '-'"),
PARSE_OPT_NONEG, diff_opt_char),
OPT_CALLBACK_F(0, "output-indicator-context",
&options->output_indicators[OUTPUT_INDICATOR_CONTEXT],
N_("<char>"),
N_("specify the character to indicate a context instead of ' '"),
PARSE_OPT_NONEG, diff_opt_char),
OPT_GROUP(N_("Diff rename options")),
OPT_CALLBACK_F('B', "break-rewrites", &options->break_opt, N_("<n>[/<m>]"),
N_("break complete rewrite changes into pairs of delete and create"),
PARSE_OPT_NONEG | PARSE_OPT_OPTARG,
diff_opt_break_rewrites),
OPT_CALLBACK_F('M', "find-renames", options, N_("<n>"),
N_("detect renames"),
PARSE_OPT_NONEG | PARSE_OPT_OPTARG,
diff_opt_find_renames),
OPT_SET_INT_F('D', "irreversible-delete", &options->irreversible_delete,
N_("omit the preimage for deletes"),
1, PARSE_OPT_NONEG),
OPT_CALLBACK_F('C', "find-copies", options, N_("<n>"),
N_("detect copies"),
PARSE_OPT_NONEG | PARSE_OPT_OPTARG,
diff_opt_find_copies),
OPT_BOOL(0, "find-copies-harder", &options->flags.find_copies_harder,
N_("use unmodified files as source to find copies")),
OPT_SET_INT_F(0, "no-renames", &options->detect_rename,
N_("disable rename detection"),
0, PARSE_OPT_NONEG),
OPT_BOOL(0, "rename-empty", &options->flags.rename_empty,
N_("use empty blobs as rename source")),
OPT_GROUP(N_("Diff algorithm options")),
OPT_BIT(0, "minimal", &options->xdl_opts,
N_("produce the smallest possible diff"),
XDF_NEED_MINIMAL),
OPT_BIT_F('w', "ignore-all-space", &options->xdl_opts,
N_("ignore whitespace when comparing lines"),
XDF_IGNORE_WHITESPACE, PARSE_OPT_NONEG),
OPT_BIT_F('b', "ignore-space-change", &options->xdl_opts,
N_("ignore changes in amount of whitespace"),
XDF_IGNORE_WHITESPACE_CHANGE, PARSE_OPT_NONEG),
OPT_BIT_F(0, "ignore-space-at-eol", &options->xdl_opts,
N_("ignore changes in whitespace at EOL"),
XDF_IGNORE_WHITESPACE_AT_EOL, PARSE_OPT_NONEG),
OPT_BIT_F(0, "ignore-cr-at-eol", &options->xdl_opts,
N_("ignore carrier-return at the end of line"),
XDF_IGNORE_CR_AT_EOL, PARSE_OPT_NONEG),
OPT_BIT_F(0, "ignore-blank-lines", &options->xdl_opts,
N_("ignore changes whose lines are all blank"),
XDF_IGNORE_BLANK_LINES, PARSE_OPT_NONEG),
OPT_BIT(0, "indent-heuristic", &options->xdl_opts,
N_("heuristic to shift diff hunk boundaries for easy reading"),
XDF_INDENT_HEURISTIC),
OPT_CALLBACK_F(0, "patience", options, NULL,
N_("generate diff using the \"patience diff\" algorithm"),
PARSE_OPT_NONEG | PARSE_OPT_NOARG,
diff_opt_patience),
OPT_BITOP(0, "histogram", &options->xdl_opts,
N_("generate diff using the \"histogram diff\" algorithm"),
XDF_HISTOGRAM_DIFF, XDF_DIFF_ALGORITHM_MASK),
OPT_CALLBACK_F(0, "diff-algorithm", options, N_("<algorithm>"),
N_("choose a diff algorithm"),
PARSE_OPT_NONEG, diff_opt_diff_algorithm),
OPT_CALLBACK_F(0, "anchored", options, N_("<text>"),
N_("generate diff using the \"anchored diff\" algorithm"),
PARSE_OPT_NONEG, diff_opt_anchored),
OPT_GROUP(N_("Diff other options")),
OPT_CALLBACK_F(0, "relative", options, N_("<prefix>"),
N_("when run from subdir, exclude changes outside and show relative paths"),
PARSE_OPT_NONEG | PARSE_OPT_OPTARG,
diff_opt_relative),
OPT_BOOL('a', "text", &options->flags.text,
N_("treat all files as text")),
{ OPTION_CALLBACK, 0, "output", options, N_("<file>"),
N_("Output to a specific file"),
PARSE_OPT_NONEG, NULL, 0, diff_opt_output },
OPT_END()
};
ALLOC_ARRAY(options->parseopts, ARRAY_SIZE(parseopts));
memcpy(options->parseopts, parseopts, sizeof(parseopts));
}
int diff_opt_parse(struct diff_options *options,
const char **av, int ac, const char *prefix)
{
const char *arg = av[0];
const char *optarg;
int argcount;
if (!prefix)
prefix = "";
ac = parse_options(ac, av, prefix, options->parseopts, NULL,
PARSE_OPT_KEEP_DASHDASH |
PARSE_OPT_KEEP_UNKNOWN |
PARSE_OPT_NO_INTERNAL_HELP |
PARSE_OPT_ONE_SHOT |
PARSE_OPT_STOP_AT_NON_OPTION);
if (ac)
return ac;
/* flags options */
if (!strcmp(arg, "-R"))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.reverse_diff = 1;
Finally implement "git log --follow" Ok, I've really held off doing this too damn long, because I'm lazy, and I was always hoping that somebody else would do it. But no, people keep asking for it, but nobody actually did anything, so I decided I might as well bite the bullet, and instead of telling people they could add a "--follow" flag to "git log" to do what they want to do, I decided that it looks like I just have to do it for them.. The code wasn't actually that complicated, in that the diffstat for this patch literally says "70 insertions(+), 1 deletions(-)", but I will have to admit that in order to get to this fairly simple patch, you did have to know and understand the internal git diff generation machinery pretty well, and had to really be able to follow how commit generation interacts with generating patches and generating the log. So I suspect that while I was right that it wasn't that hard, I might have been expecting too much of random people - this patch does seem to be firmly in the core "Linus or Junio" territory. To make a long story short: I'm sorry for it taking so long until I just did it. I'm not going to guarantee that this works for everybody, but you really can just look at the patch, and after the appropriate appreciative noises ("Ooh, aah") over how clever I am, you can then just notice that the code itself isn't really that complicated. All the real new code is in the new "try_to_follow_renames()" function. It really isn't rocket science: we notice that the pathname we were looking at went away, so we start a full tree diff and try to see if we can instead make that pathname be a rename or a copy from some other previous pathname. And if we can, we just continue, except we show *that* particular diff, and ever after we use the _previous_ pathname. One thing to look out for: the "rename detection" is considered to be a singular event in the _linear_ "git log" output! That's what people want to do, but I just wanted to point out that this patch is *not* carrying around a "commit,pathname" kind of pair and it's *not* going to be able to notice the file coming from multiple *different* files in earlier history. IOW, if you use "git log --follow", then you get the stupid CVS/SVN kind of "files have single identities" kind of semantics, and git log will just pick the identity based on the normal move/copy heuristics _as_if_ the history could be linearized. Put another way: I think the model is broken, but given the broken model, I think this patch does just about as well as you can do. If you have merges with the same "file" having different filenames over the two branches, git will just end up picking _one_ of the pathnames at the point where the newer one goes away. It never looks at multiple pathnames in parallel. And if you understood all that, you probably didn't need it explained, and if you didn't understand the above blathering, it doesn't really mtter to you. What matters to you is that you can now do git log -p --follow builtin-rev-list.c and it will find the point where the old "rev-list.c" got renamed to "builtin-rev-list.c" and show it as such. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-20 05:22:46 +08:00
else if (!strcmp(arg, "--follow"))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.follow_renames = 1;
else if (!strcmp(arg, "--no-follow")) {
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.follow_renames = 0;
options->flags.default_follow_renames = 0;
} else if (skip_to_optional_arg_default(arg, "--color", &arg, "always")) {
int value = git_config_colorbool(NULL, arg);
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
if (value < 0)
return error("option `color' expects \"always\", \"auto\", or \"never\"");
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
options->use_color = value;
}
else if (!strcmp(arg, "--no-color"))
options->use_color = 0;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
else if (!strcmp(arg, "--color-moved")) {
if (diff_color_moved_default)
options->color_moved = diff_color_moved_default;
if (options->color_moved == COLOR_MOVED_NO)
options->color_moved = COLOR_MOVED_DEFAULT;
} else if (!strcmp(arg, "--no-color-moved"))
options->color_moved = COLOR_MOVED_NO;
else if (skip_prefix(arg, "--color-moved=", &arg)) {
int cm = parse_color_moved(arg);
if (cm < 0)
return error("bad --color-moved argument: %s", arg);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
options->color_moved = cm;
diff.c: decouple white space treatment from move detection algorithm In the original implementation of the move detection logic the choice for ignoring white space changes is the same for the move detection as it is for the regular diff. Some cases came up where different treatment would have been nice. Allow the user to specify that white space should be ignored differently during detection of moved lines than during generation of added and removed lines. This is done by providing analogs to the --ignore-space-at-eol, -b, and -w options by introducing the option --color-moved-ws=<modes> with the modes named "ignore-space-at-eol", "ignore-space-change" and "ignore-all-space", which is used only during the move detection phase. As we change the default, we'll adjust the tests. For now we do not infer any options to treat white spaces in the move detection from the generic white space options given to diff. This can be tuned later to reasonable default. As we plan on adding more white space related options in a later patch, that interferes with the current white space options, use a flag field and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily check at parse time if we give invalid combinations and (b) can reuse parts of this patch. By having the white space treatment in its own option, we'll also make it easier for a later patch to have an config option for spaces in the move detection. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 07:05:40 +08:00
} else if (skip_prefix(arg, "--color-moved-ws=", &arg)) {
unsigned cm = parse_color_moved_ws(arg);
if (cm & COLOR_MOVED_WS_ERROR)
return -1;
options->color_moved_ws_handling = cm;
} else if (skip_to_optional_arg_default(arg, "--color-words", &options->word_regex, NULL)) {
options->use_color = 1;
options->word_diff = DIFF_WORDS_COLOR;
}
else if (!strcmp(arg, "--word-diff")) {
if (options->word_diff == DIFF_WORDS_NONE)
options->word_diff = DIFF_WORDS_PLAIN;
}
else if (skip_prefix(arg, "--word-diff=", &arg)) {
if (!strcmp(arg, "plain"))
options->word_diff = DIFF_WORDS_PLAIN;
else if (!strcmp(arg, "color")) {
options->use_color = 1;
options->word_diff = DIFF_WORDS_COLOR;
}
else if (!strcmp(arg, "porcelain"))
options->word_diff = DIFF_WORDS_PORCELAIN;
else if (!strcmp(arg, "none"))
options->word_diff = DIFF_WORDS_NONE;
else
die("bad --word-diff argument: %s", arg);
}
else if ((argcount = parse_long_opt("word-diff-regex", av, &optarg))) {
if (options->word_diff == DIFF_WORDS_NONE)
options->word_diff = DIFF_WORDS_PLAIN;
options->word_regex = optarg;
return argcount;
}
else if (!strcmp(arg, "--exit-code"))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.exit_with_status = 1;
else if (!strcmp(arg, "--quiet"))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.quick = 1;
else if (!strcmp(arg, "--ext-diff"))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.allow_external = 1;
else if (!strcmp(arg, "--no-ext-diff"))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.allow_external = 0;
else if (!strcmp(arg, "--textconv")) {
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.allow_textconv = 1;
options->flags.textconv_set_via_cmdline = 1;
} else if (!strcmp(arg, "--no-textconv"))
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.allow_textconv = 0;
else if (skip_to_optional_arg_default(arg, "--ignore-submodules", &arg, "all")) {
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.override_submodule_config = 1;
handle_ignore_submodules_arg(options, arg);
} else if (skip_to_optional_arg_default(arg, "--submodule", &arg, "log"))
return parse_submodule_opt(options, arg);
else if (skip_prefix(arg, "--ws-error-highlight=", &arg))
return parse_ws_error_highlight_opt(options, arg);
else if (!strcmp(arg, "--ita-invisible-in-index"))
options->ita_invisible_in_index = 1;
else if (!strcmp(arg, "--ita-visible-in-index"))
options->ita_invisible_in_index = 0;
/* misc options */
else if (!strcmp(arg, "-z"))
options->line_termination = 0;
else if ((argcount = short_opt('l', av, &optarg))) {
options->rename_limit = strtoul(optarg, NULL, 10);
return argcount;
}
else if ((argcount = short_opt('S', av, &optarg))) {
options->pickaxe = optarg;
options->pickaxe_opts |= DIFF_PICKAXE_KIND_S;
return argcount;
} else if ((argcount = short_opt('G', av, &optarg))) {
options->pickaxe = optarg;
options->pickaxe_opts |= DIFF_PICKAXE_KIND_G;
return argcount;
}
else if (!strcmp(arg, "--pickaxe-all"))
options->pickaxe_opts |= DIFF_PICKAXE_ALL;
else if (!strcmp(arg, "--pickaxe-regex"))
options->pickaxe_opts |= DIFF_PICKAXE_REGEX;
else if ((argcount = short_opt('O', av, &optarg))) {
options->orderfile = prefix_filename(prefix, optarg);
return argcount;
diffcore: add a pickaxe option to find a specific blob Sometimes users are given a hash of an object and they want to identify it further (ex.: Use verify-pack to find the largest blobs, but what are these? or [1]) One might be tempted to extend git-describe to also work with blobs, such that `git describe <blob-id>` gives a description as '<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer number of responses (>110), it turns out this is tricky to get right. The hard part to get right is picking the correct 'commit-ish' as that could be the commit that (re-)introduced the blob or the blob that removed the blob; the blob could exist in different branches. Junio hinted at a different approach of solving this problem, which this patch implements. Teach the diff machinery another flag for restricting the information to what is shown. For example: $ ./git log --oneline --find-object=v2.0.0:Makefile b2feb64309 Revert the whole "ask curl-config" topic for now 47fbfded53 i18n: only extract comments marked with "TRANSLATORS:" we observe that the Makefile as shipped with 2.0 was appeared in v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The reason why these commits both occur prior to v2.0.0 are evil merges that are not found using this new mechanism. [1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob [2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/ Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-05 06:50:42 +08:00
} else if (skip_prefix(arg, "--find-object=", &arg))
return parse_objfind_opt(options, arg);
else if ((argcount = parse_long_opt("diff-filter", av, &optarg))) {
int offending = parse_diff_filter_opt(optarg, options);
if (offending)
die("unknown change class '%c' in --diff-filter=%s",
offending, optarg);
return argcount;
}
diff: handle --no-abbrev in no-index case There are two different places where the --no-abbrev option is parsed, and two different places where SHA-1s are abbreviated. We normally parse --no-abbrev with setup_revisions(), but in the no-index case, "git diff" calls diff_opt_parse() directly, and diff_opt_parse() didn't handle --no-abbrev until now. (It did handle --abbrev, however.) We normally abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff: handle sha1 abbreviations outside of repository, 2016-10-20) recently introduced a special case when you run "git diff" outside of a repository. setup_revisions() does also call diff_opt_parse(), but not for --abbrev or --no-abbrev, which it handles itself. setup_revisions() sets rev_info->abbrev, and later copies that to diff_options->abbrev. It handles --no-abbrev by setting abbrev to zero. (This change doesn't touch that.) Setting abbrev to zero was broken in the outside-of-a-repository special case, which until now resulted in a truly zero-length SHA-1, rather than taking zero to mean do not abbreviate. The only way to trigger this bug, however, was by running "git diff --raw" without either the --abbrev or --no-abbrev options, because 1) without --raw it doesn't respect abbrev (which is bizarre, but has been that way forever), 2) we silently clamp --abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until now. The outside-of-a-repository case is one of three no-index cases. The other two are when one of the files you're comparing is outside of the repository you're in, and the --no-index option. Signed-off-by: Jack Bates <jack@nottheoilrig.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 00:56:14 +08:00
else if (!strcmp(arg, "--no-abbrev"))
options->abbrev = 0;
else if (!strcmp(arg, "--abbrev"))
options->abbrev = DEFAULT_ABBREV;
else if (skip_prefix(arg, "--abbrev=", &arg)) {
options->abbrev = strtoul(arg, NULL, 10);
if (options->abbrev < MINIMUM_ABBREV)
options->abbrev = MINIMUM_ABBREV;
else if (the_hash_algo->hexsz < options->abbrev)
options->abbrev = the_hash_algo->hexsz;
}
else if ((argcount = parse_long_opt("src-prefix", av, &optarg))) {
options->a_prefix = optarg;
return argcount;
}
else if ((argcount = parse_long_opt("line-prefix", av, &optarg))) {
options->line_prefix = optarg;
options->line_prefix_length = strlen(options->line_prefix);
graph_setup_line_prefix(options);
return argcount;
}
else if ((argcount = parse_long_opt("dst-prefix", av, &optarg))) {
options->b_prefix = optarg;
return argcount;
}
else if (!strcmp(arg, "--no-prefix"))
options->a_prefix = options->b_prefix = "";
else if (opt_arg(arg, '\0', "inter-hunk-context",
&options->interhunkcontext))
;
else
return 0;
return 1;
}
int parse_rename_score(const char **cp_p)
{
unsigned long num, scale;
int ch, dot;
const char *cp = *cp_p;
num = 0;
scale = 1;
dot = 0;
for (;;) {
ch = *cp;
if ( !dot && ch == '.' ) {
scale = 1;
dot = 1;
} else if ( ch == '%' ) {
scale = dot ? scale*100 : 100;
cp++; /* % is always at the end */
break;
} else if ( ch >= '0' && ch <= '9' ) {
if ( scale < 100000 ) {
scale *= 10;
num = (num*10) + (ch-'0');
}
} else {
break;
}
cp++;
}
*cp_p = cp;
/* user says num divided by scale and we say internally that
* is MAX_SCORE * num / scale.
*/
return (int)((num >= scale) ? MAX_SCORE : (MAX_SCORE * num / scale));
}
struct diff_queue_struct diff_queued_diff;
void diff_q(struct diff_queue_struct *queue, struct diff_filepair *dp)
{
ALLOC_GROW(queue->queue, queue->nr + 1, queue->alloc);
queue->queue[queue->nr++] = dp;
}
struct diff_filepair *diff_queue(struct diff_queue_struct *queue,
struct diff_filespec *one,
struct diff_filespec *two)
{
struct diff_filepair *dp = xcalloc(1, sizeof(*dp));
dp->one = one;
dp->two = two;
if (queue)
diff_q(queue, dp);
return dp;
}
void diff_free_filepair(struct diff_filepair *p)
{
free_filespec(p->one);
free_filespec(p->two);
free(p);
}
const char *diff_aligned_abbrev(const struct object_id *oid, int len)
{
int abblen;
const char *abbrev;
/* Do we want all 40 hex characters? */
if (len == the_hash_algo->hexsz)
return oid_to_hex(oid);
/* An abbreviated value is fine, possibly followed by an ellipsis. */
abbrev = diff_abbrev_oid(oid, len);
if (!print_sha1_ellipsis())
return abbrev;
abblen = strlen(abbrev);
/*
* In well-behaved cases, where the abbreviated result is the
* same as the requested length, append three dots after the
* abbreviation (hence the whole logic is limited to the case
* where abblen < 37); when the actual abbreviated result is a
* bit longer than the requested length, we reduce the number
* of dots so that they match the well-behaved ones. However,
* if the actual abbreviation is longer than the requested
* length by more than three, we give up on aligning, and add
* three dots anyway, to indicate that the output is not the
* full object name. Yes, this may be suboptimal, but this
* appears only in "diff --raw --abbrev" output and it is not
* worth the effort to change it now. Note that this would
* likely to work fine when the automatic sizing of default
* abbreviation length is used--we would be fed -1 in "len" in
* that case, and will end up always appending three-dots, but
* the automatic sizing is supposed to give abblen that ensures
* uniqueness across all objects (statistically speaking).
*/
if (abblen < the_hash_algo->hexsz - 3) {
static char hex[GIT_MAX_HEXSZ + 1];
if (len < abblen && abblen <= len + 2)
xsnprintf(hex, sizeof(hex), "%s%.*s", abbrev, len+3-abblen, "..");
else
xsnprintf(hex, sizeof(hex), "%s...", abbrev);
return hex;
}
return oid_to_hex(oid);
}
static void diff_flush_raw(struct diff_filepair *p, struct diff_options *opt)
{
int line_termination = opt->line_termination;
int inter_name_termination = line_termination ? '\t' : '\0';
fprintf(opt->file, "%s", diff_line_prefix(opt));
if (!(opt->output_format & DIFF_FORMAT_NAME_STATUS)) {
fprintf(opt->file, ":%06o %06o %s ", p->one->mode, p->two->mode,
diff_aligned_abbrev(&p->one->oid, opt->abbrev));
fprintf(opt->file, "%s ",
diff_aligned_abbrev(&p->two->oid, opt->abbrev));
}
if (p->score) {
fprintf(opt->file, "%c%03d%c", p->status, similarity_index(p),
inter_name_termination);
} else {
fprintf(opt->file, "%c%c", p->status, inter_name_termination);
}
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
if (p->status == DIFF_STATUS_COPIED ||
p->status == DIFF_STATUS_RENAMED) {
const char *name_a, *name_b;
name_a = p->one->path;
name_b = p->two->path;
strip_prefix(opt->prefix_length, &name_a, &name_b);
write_name_quoted(name_a, opt->file, inter_name_termination);
write_name_quoted(name_b, opt->file, line_termination);
} else {
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
const char *name_a, *name_b;
name_a = p->one->mode ? p->one->path : p->two->path;
name_b = NULL;
strip_prefix(opt->prefix_length, &name_a, &name_b);
write_name_quoted(name_a, opt->file, line_termination);
}
}
int diff_unmodified_pair(struct diff_filepair *p)
{
/* This function is written stricter than necessary to support
* the currently implemented transformers, but the idea is to
* let transformers to produce diff_filepairs any way they want,
* and filter and clean them up here before producing the output.
*/
struct diff_filespec *one = p->one, *two = p->two;
if (DIFF_PAIR_UNMERGED(p))
return 0; /* unmerged is interesting */
/* deletion, addition, mode or type change
* and rename are all interesting.
*/
if (DIFF_FILE_VALID(one) != DIFF_FILE_VALID(two) ||
DIFF_PAIR_MODE_CHANGED(p) ||
strcmp(one->path, two->path))
return 0;
/* both are valid and point at the same path. that is, we are
* dealing with a change.
*/
if (one->oid_valid && two->oid_valid &&
oideq(&one->oid, &two->oid) &&
!one->dirty_submodule && !two->dirty_submodule)
return 1; /* no change */
if (!one->oid_valid && !two->oid_valid)
return 1; /* both look at the same file on the filesystem. */
return 0;
}
static void diff_flush_patch(struct diff_filepair *p, struct diff_options *o)
{
if (diff_unmodified_pair(p))
return;
if ((DIFF_FILE_VALID(p->one) && S_ISDIR(p->one->mode)) ||
(DIFF_FILE_VALID(p->two) && S_ISDIR(p->two->mode)))
return; /* no tree diffs in patch format */
run_diff(p, o);
}
static void diff_flush_stat(struct diff_filepair *p, struct diff_options *o,
struct diffstat_t *diffstat)
{
if (diff_unmodified_pair(p))
return;
if ((DIFF_FILE_VALID(p->one) && S_ISDIR(p->one->mode)) ||
(DIFF_FILE_VALID(p->two) && S_ISDIR(p->two->mode)))
return; /* no useful stat for tree diffs */
run_diffstat(p, o, diffstat);
}
static void diff_flush_checkdiff(struct diff_filepair *p,
struct diff_options *o)
{
if (diff_unmodified_pair(p))
return;
if ((DIFF_FILE_VALID(p->one) && S_ISDIR(p->one->mode)) ||
(DIFF_FILE_VALID(p->two) && S_ISDIR(p->two->mode)))
return; /* nothing to check in tree diffs */
run_checkdiff(p, o);
}
int diff_queue_is_empty(void)
{
struct diff_queue_struct *q = &diff_queued_diff;
int i;
for (i = 0; i < q->nr; i++)
if (!diff_unmodified_pair(q->queue[i]))
return 0;
return 1;
}
#if DIFF_DEBUG
void diff_debug_filespec(struct diff_filespec *s, int x, const char *one)
{
fprintf(stderr, "queue[%d] %s (%s) %s %06o %s\n",
x, one ? one : "",
s->path,
DIFF_FILE_VALID(s) ? "valid" : "invalid",
s->mode,
s->oid_valid ? oid_to_hex(&s->oid) : "");
fprintf(stderr, "queue[%d] %s size %lu\n",
x, one ? one : "",
s->size);
}
void diff_debug_filepair(const struct diff_filepair *p, int i)
{
diff_debug_filespec(p->one, i, "one");
diff_debug_filespec(p->two, i, "two");
fprintf(stderr, "score %d, status %c rename_used %d broken %d\n",
p->score, p->status ? p->status : '?',
p->one->rename_used, p->broken_pair);
}
void diff_debug_queue(const char *msg, struct diff_queue_struct *q)
{
int i;
if (msg)
fprintf(stderr, "%s\n", msg);
fprintf(stderr, "q->nr = %d\n", q->nr);
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
diff_debug_filepair(p, i);
}
}
#endif
static void diff_resolve_rename_copy(void)
{
int i;
struct diff_filepair *p;
struct diff_queue_struct *q = &diff_queued_diff;
diff_debug_queue("resolve-rename-copy", q);
for (i = 0; i < q->nr; i++) {
p = q->queue[i];
p->status = 0; /* undecided */
if (DIFF_PAIR_UNMERGED(p))
p->status = DIFF_STATUS_UNMERGED;
else if (!DIFF_FILE_VALID(p->one))
p->status = DIFF_STATUS_ADDED;
else if (!DIFF_FILE_VALID(p->two))
p->status = DIFF_STATUS_DELETED;
else if (DIFF_PAIR_TYPE_CHANGED(p))
p->status = DIFF_STATUS_TYPE_CHANGED;
/* from this point on, we are dealing with a pair
* whose both sides are valid and of the same type, i.e.
* either in-place edit or rename/copy edit.
*/
else if (DIFF_PAIR_RENAME(p)) {
/*
* A rename might have re-connected a broken
* pair up, causing the pathnames to be the
* same again. If so, that's not a rename at
* all, just a modification..
*
* Otherwise, see if this source was used for
* multiple renames, in which case we decrement
* the count, and call it a copy.
*/
if (!strcmp(p->one->path, p->two->path))
p->status = DIFF_STATUS_MODIFIED;
else if (--p->one->rename_used > 0)
p->status = DIFF_STATUS_COPIED;
else
p->status = DIFF_STATUS_RENAMED;
}
else if (!oideq(&p->one->oid, &p->two->oid) ||
p->one->mode != p->two->mode ||
p->one->dirty_submodule ||
p->two->dirty_submodule ||
is_null_oid(&p->one->oid))
p->status = DIFF_STATUS_MODIFIED;
else {
/* This is a "no-change" entry and should not
* happen anymore, but prepare for broken callers.
*/
error("feeding unmodified %s to diffcore",
p->one->path);
p->status = DIFF_STATUS_UNKNOWN;
}
}
diff_debug_queue("resolve-rename-copy done", q);
}
static int check_pair_status(struct diff_filepair *p)
{
switch (p->status) {
case DIFF_STATUS_UNKNOWN:
return 0;
case 0:
die("internal error in diff-resolve-rename-copy");
default:
return 1;
}
}
static void flush_one_pair(struct diff_filepair *p, struct diff_options *opt)
{
int fmt = opt->output_format;
if (fmt & DIFF_FORMAT_CHECKDIFF)
diff_flush_checkdiff(p, opt);
else if (fmt & (DIFF_FORMAT_RAW | DIFF_FORMAT_NAME_STATUS))
diff_flush_raw(p, opt);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
else if (fmt & DIFF_FORMAT_NAME) {
const char *name_a, *name_b;
name_a = p->two->path;
name_b = NULL;
strip_prefix(opt->prefix_length, &name_a, &name_b);
fprintf(opt->file, "%s", diff_line_prefix(opt));
write_name_quoted(name_a, opt->file, opt->line_termination);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
}
}
static void show_file_mode_name(struct diff_options *opt, const char *newdelete, struct diff_filespec *fs)
{
struct strbuf sb = STRBUF_INIT;
if (fs->mode)
strbuf_addf(&sb, " %s mode %06o ", newdelete, fs->mode);
else
strbuf_addf(&sb, " %s ", newdelete);
quote_c_style(fs->path, &sb, NULL, 0);
strbuf_addch(&sb, '\n');
emit_diff_symbol(opt, DIFF_SYMBOL_SUMMARY,
sb.buf, sb.len, 0);
strbuf_release(&sb);
}
static void show_mode_change(struct diff_options *opt, struct diff_filepair *p,
int show_name)
{
if (p->one->mode && p->two->mode && p->one->mode != p->two->mode) {
struct strbuf sb = STRBUF_INIT;
strbuf_addf(&sb, " mode change %06o => %06o",
p->one->mode, p->two->mode);
if (show_name) {
strbuf_addch(&sb, ' ');
quote_c_style(p->two->path, &sb, NULL, 0);
}
strbuf_addch(&sb, '\n');
emit_diff_symbol(opt, DIFF_SYMBOL_SUMMARY,
sb.buf, sb.len, 0);
strbuf_release(&sb);
}
}
static void show_rename_copy(struct diff_options *opt, const char *renamecopy,
struct diff_filepair *p)
{
struct strbuf sb = STRBUF_INIT;
struct strbuf names = STRBUF_INIT;
pprint_rename(&names, p->one->path, p->two->path);
strbuf_addf(&sb, " %s %s (%d%%)\n",
renamecopy, names.buf, similarity_index(p));
strbuf_release(&names);
emit_diff_symbol(opt, DIFF_SYMBOL_SUMMARY,
sb.buf, sb.len, 0);
show_mode_change(opt, p, 0);
strbuf_release(&sb);
}
static void diff_summary(struct diff_options *opt, struct diff_filepair *p)
{
switch(p->status) {
case DIFF_STATUS_DELETED:
show_file_mode_name(opt, "delete", p->one);
break;
case DIFF_STATUS_ADDED:
show_file_mode_name(opt, "create", p->two);
break;
case DIFF_STATUS_COPIED:
show_rename_copy(opt, "copy", p);
break;
case DIFF_STATUS_RENAMED:
show_rename_copy(opt, "rename", p);
break;
default:
if (p->score) {
struct strbuf sb = STRBUF_INIT;
strbuf_addstr(&sb, " rewrite ");
quote_c_style(p->two->path, &sb, NULL, 0);
strbuf_addf(&sb, " (%d%%)\n", similarity_index(p));
emit_diff_symbol(opt, DIFF_SYMBOL_SUMMARY,
sb.buf, sb.len, 0);
strbuf_release(&sb);
}
show_mode_change(opt, p, !p->score);
break;
}
}
struct patch_id_t {
fix openssl headers conflicting with custom SHA1 implementations On ARM I have the following compilation errors: CC fast-import.o In file included from cache.h:8, from builtin.h:6, from fast-import.c:142: arm/sha1.h:14: error: conflicting types for 'SHA_CTX' /usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here arm/sha1.h:16: error: conflicting types for 'SHA1_Init' /usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here arm/sha1.h:17: error: conflicting types for 'SHA1_Update' /usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here arm/sha1.h:18: error: conflicting types for 'SHA1_Final' /usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here make: *** [fast-import.o] Error 1 This is because openssl header files are always included in git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not set, which somehow brings in <openssl/sha1.h> clashing with the custom ARM version. Compilation of git is probably broken on PPC too for the same reason. Turns out that the only file requiring openssl/ssl.h and openssl/err.h is imap-send.c. But only moving those problematic includes there doesn't solve the issue as it also includes cache.h which brings in the conflicting local SHA1 header file. As suggested by Jeff King, the best solution is to rename our references to SHA1 functions and structure to something git specific, and define those according to the implementation used. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-02 02:05:20 +08:00
git_SHA_CTX *ctx;
int patchlen;
};
static int remove_space(char *line, int len)
{
int i;
char *dst = line;
unsigned char c;
for (i = 0; i < len; i++)
if (!isspace((c = line[i])))
*dst++ = c;
return dst - line;
}
static void patch_id_consume(void *priv, char *line, unsigned long len)
{
struct patch_id_t *data = priv;
int new_len;
new_len = remove_space(line, len);
fix openssl headers conflicting with custom SHA1 implementations On ARM I have the following compilation errors: CC fast-import.o In file included from cache.h:8, from builtin.h:6, from fast-import.c:142: arm/sha1.h:14: error: conflicting types for 'SHA_CTX' /usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here arm/sha1.h:16: error: conflicting types for 'SHA1_Init' /usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here arm/sha1.h:17: error: conflicting types for 'SHA1_Update' /usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here arm/sha1.h:18: error: conflicting types for 'SHA1_Final' /usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here make: *** [fast-import.o] Error 1 This is because openssl header files are always included in git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not set, which somehow brings in <openssl/sha1.h> clashing with the custom ARM version. Compilation of git is probably broken on PPC too for the same reason. Turns out that the only file requiring openssl/ssl.h and openssl/err.h is imap-send.c. But only moving those problematic includes there doesn't solve the issue as it also includes cache.h which brings in the conflicting local SHA1 header file. As suggested by Jeff King, the best solution is to rename our references to SHA1 functions and structure to something git specific, and define those according to the implementation used. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-02 02:05:20 +08:00
git_SHA1_Update(data->ctx, line, new_len);
data->patchlen += new_len;
}
diff: avoid fixed-size buffer for patch-ids To generate a patch id, we format the diff header into a fixed-size buffer, and then feed the result to our sha1 computation. The fixed buffer has size '4*PATH_MAX + 20', which in theory accommodates the four filenames plus some extra data. Except: 1. The filenames may not be constrained to PATH_MAX. The static value may not be a real limit on the current filesystem. Moreover, we may compute patch-ids for names stored only in git, without touching the current filesystem at all. 2. The 20 bytes is not nearly enough to cover the extra content we put in the buffer. As a result, the data we feed to the sha1 computation may be truncated, and it's possible that a commit with a very long filename could erroneously collide in the patch-id space with another commit. For instance, if one commit modified "really-long-filename/foo" and another modified "bar" in the same directory. In practice this is unlikely. Because the filenames are repeated, and because there's a single cutoff at the end of the buffer, the offending filename would have to be on the order of four times larger than PATH_MAX. We could fix this by moving to a strbuf. However, we can observe that the purpose of formatting this in the first place is to feed it to git_SHA1_Update(). So instead, let's just feed each part of the formatted string directly. This actually ends up more readable, and we can even factor out some duplicated bits from the various conditional branches. Technically this may change the output of patch-id for very long filenames, but it's not worth making an exception for this in the --stable output. It was a bug, and one that only affected an unlikely set of paths. And anyway, the exact value would have varied from platform to platform depending on the value of PATH_MAX, so there is no "stable" value. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-31 02:26:05 +08:00
static void patch_id_add_string(git_SHA_CTX *ctx, const char *str)
{
git_SHA1_Update(ctx, str, strlen(str));
}
static void patch_id_add_mode(git_SHA_CTX *ctx, unsigned mode)
{
/* large enough for 2^32 in octal */
char buf[12];
int len = xsnprintf(buf, sizeof(buf), "%06o", mode);
git_SHA1_Update(ctx, buf, len);
}
/* returns 0 upon success, and writes result into sha1 */
static int diff_get_patch_id(struct diff_options *options, struct object_id *oid, int diff_header_only)
{
struct diff_queue_struct *q = &diff_queued_diff;
int i;
fix openssl headers conflicting with custom SHA1 implementations On ARM I have the following compilation errors: CC fast-import.o In file included from cache.h:8, from builtin.h:6, from fast-import.c:142: arm/sha1.h:14: error: conflicting types for 'SHA_CTX' /usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here arm/sha1.h:16: error: conflicting types for 'SHA1_Init' /usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here arm/sha1.h:17: error: conflicting types for 'SHA1_Update' /usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here arm/sha1.h:18: error: conflicting types for 'SHA1_Final' /usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here make: *** [fast-import.o] Error 1 This is because openssl header files are always included in git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not set, which somehow brings in <openssl/sha1.h> clashing with the custom ARM version. Compilation of git is probably broken on PPC too for the same reason. Turns out that the only file requiring openssl/ssl.h and openssl/err.h is imap-send.c. But only moving those problematic includes there doesn't solve the issue as it also includes cache.h which brings in the conflicting local SHA1 header file. As suggested by Jeff King, the best solution is to rename our references to SHA1 functions and structure to something git specific, and define those according to the implementation used. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-02 02:05:20 +08:00
git_SHA_CTX ctx;
struct patch_id_t data;
fix openssl headers conflicting with custom SHA1 implementations On ARM I have the following compilation errors: CC fast-import.o In file included from cache.h:8, from builtin.h:6, from fast-import.c:142: arm/sha1.h:14: error: conflicting types for 'SHA_CTX' /usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here arm/sha1.h:16: error: conflicting types for 'SHA1_Init' /usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here arm/sha1.h:17: error: conflicting types for 'SHA1_Update' /usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here arm/sha1.h:18: error: conflicting types for 'SHA1_Final' /usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here make: *** [fast-import.o] Error 1 This is because openssl header files are always included in git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not set, which somehow brings in <openssl/sha1.h> clashing with the custom ARM version. Compilation of git is probably broken on PPC too for the same reason. Turns out that the only file requiring openssl/ssl.h and openssl/err.h is imap-send.c. But only moving those problematic includes there doesn't solve the issue as it also includes cache.h which brings in the conflicting local SHA1 header file. As suggested by Jeff King, the best solution is to rename our references to SHA1 functions and structure to something git specific, and define those according to the implementation used. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-02 02:05:20 +08:00
git_SHA1_Init(&ctx);
memset(&data, 0, sizeof(struct patch_id_t));
data.ctx = &ctx;
for (i = 0; i < q->nr; i++) {
xpparam_t xpp;
xdemitconf_t xecfg;
mmfile_t mf1, mf2;
struct diff_filepair *p = q->queue[i];
int len1, len2;
memset(&xpp, 0, sizeof(xpp));
memset(&xecfg, 0, sizeof(xecfg));
if (p->status == 0)
return error("internal diff status error");
if (p->status == DIFF_STATUS_UNKNOWN)
continue;
if (diff_unmodified_pair(p))
continue;
if ((DIFF_FILE_VALID(p->one) && S_ISDIR(p->one->mode)) ||
(DIFF_FILE_VALID(p->two) && S_ISDIR(p->two->mode)))
continue;
if (DIFF_PAIR_UNMERGED(p))
continue;
diff_fill_oid_info(p->one, options->repo->index);
diff_fill_oid_info(p->two, options->repo->index);
len1 = remove_space(p->one->path, strlen(p->one->path));
len2 = remove_space(p->two->path, strlen(p->two->path));
diff: avoid fixed-size buffer for patch-ids To generate a patch id, we format the diff header into a fixed-size buffer, and then feed the result to our sha1 computation. The fixed buffer has size '4*PATH_MAX + 20', which in theory accommodates the four filenames plus some extra data. Except: 1. The filenames may not be constrained to PATH_MAX. The static value may not be a real limit on the current filesystem. Moreover, we may compute patch-ids for names stored only in git, without touching the current filesystem at all. 2. The 20 bytes is not nearly enough to cover the extra content we put in the buffer. As a result, the data we feed to the sha1 computation may be truncated, and it's possible that a commit with a very long filename could erroneously collide in the patch-id space with another commit. For instance, if one commit modified "really-long-filename/foo" and another modified "bar" in the same directory. In practice this is unlikely. Because the filenames are repeated, and because there's a single cutoff at the end of the buffer, the offending filename would have to be on the order of four times larger than PATH_MAX. We could fix this by moving to a strbuf. However, we can observe that the purpose of formatting this in the first place is to feed it to git_SHA1_Update(). So instead, let's just feed each part of the formatted string directly. This actually ends up more readable, and we can even factor out some duplicated bits from the various conditional branches. Technically this may change the output of patch-id for very long filenames, but it's not worth making an exception for this in the --stable output. It was a bug, and one that only affected an unlikely set of paths. And anyway, the exact value would have varied from platform to platform depending on the value of PATH_MAX, so there is no "stable" value. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-31 02:26:05 +08:00
patch_id_add_string(&ctx, "diff--git");
patch_id_add_string(&ctx, "a/");
git_SHA1_Update(&ctx, p->one->path, len1);
patch_id_add_string(&ctx, "b/");
git_SHA1_Update(&ctx, p->two->path, len2);
if (p->one->mode == 0) {
patch_id_add_string(&ctx, "newfilemode");
patch_id_add_mode(&ctx, p->two->mode);
patch_id_add_string(&ctx, "---/dev/null");
patch_id_add_string(&ctx, "+++b/");
git_SHA1_Update(&ctx, p->two->path, len2);
} else if (p->two->mode == 0) {
patch_id_add_string(&ctx, "deletedfilemode");
patch_id_add_mode(&ctx, p->one->mode);
patch_id_add_string(&ctx, "---a/");
git_SHA1_Update(&ctx, p->one->path, len1);
patch_id_add_string(&ctx, "+++/dev/null");
} else {
patch_id_add_string(&ctx, "---a/");
git_SHA1_Update(&ctx, p->one->path, len1);
patch_id_add_string(&ctx, "+++b/");
git_SHA1_Update(&ctx, p->two->path, len2);
}
if (diff_header_only)
continue;
if (fill_mmfile(options->repo, &mf1, p->one) < 0 ||
fill_mmfile(options->repo, &mf2, p->two) < 0)
return error("unable to read files to diff");
if (diff_filespec_is_binary(options->repo, p->one) ||
diff_filespec_is_binary(options->repo, p->two)) {
git_SHA1_Update(&ctx, oid_to_hex(&p->one->oid),
GIT_SHA1_HEXSZ);
git_SHA1_Update(&ctx, oid_to_hex(&p->two->oid),
GIT_SHA1_HEXSZ);
continue;
}
xpp.flags = 0;
xecfg.ctxlen = 3;
xecfg.flags = 0;
if (xdi_diff_outf(&mf1, &mf2, discard_hunk_line,
patch_id_consume, &data, &xpp, &xecfg))
react to errors in xdi_diff When we call into xdiff to perform a diff, we generally lose the return code completely. Typically by ignoring the return of our xdi_diff wrapper, but sometimes we even propagate that return value up and then ignore it later. This can lead to us silently producing incorrect diffs (e.g., "git log" might produce no output at all, not even a diff header, for a content-level diff). In practice this does not happen very often, because the typical reason for xdiff to report failure is that it malloc() failed (it uses straight malloc, and not our xmalloc wrapper). But it could also happen when xdiff triggers one our callbacks, which returns an error (e.g., outf() in builtin/rerere.c tries to report a write failure in this way). And the next patch also plans to add more failure modes. Let's notice an error return from xdiff and react appropriately. In most of the diff.c code, we can simply die(), which matches the surrounding code (e.g., that is what we do if we fail to load a file for diffing in the first place). This is not that elegant, but we are probably better off dying to let the user know there was a problem, rather than simply generating bogus output. We could also just die() directly in xdi_diff, but the callers typically have a bit more context, and can provide a better message (and if we do later decide to pass errors up, we're one step closer to doing so). There is one interesting case, which is in diff_grep(). Here if we cannot generate the diff, there is nothing to match, and we silently return "no hits". This is actually what the existing code does already, but we make it a little more explicit. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25 07:12:23 +08:00
return error("unable to generate patch-id diff for %s",
p->one->path);
}
git_SHA1_Final(oid->hash, &ctx);
return 0;
}
int diff_flush_patch_id(struct diff_options *options, struct object_id *oid, int diff_header_only)
{
struct diff_queue_struct *q = &diff_queued_diff;
int i;
int result = diff_get_patch_id(options, oid, diff_header_only);
for (i = 0; i < q->nr; i++)
diff_free_filepair(q->queue[i]);
free(q->queue);
DIFF_QUEUE_CLEAR(q);
return result;
}
static int is_summary_empty(const struct diff_queue_struct *q)
{
int i;
for (i = 0; i < q->nr; i++) {
const struct diff_filepair *p = q->queue[i];
switch (p->status) {
case DIFF_STATUS_DELETED:
case DIFF_STATUS_ADDED:
case DIFF_STATUS_COPIED:
case DIFF_STATUS_RENAMED:
return 0;
default:
if (p->score)
return 0;
if (p->one->mode && p->two->mode &&
p->one->mode != p->two->mode)
return 0;
break;
}
}
return 1;
}
static const char rename_limit_warning[] =
N_("inexact rename detection was skipped due to too many files.");
static const char degrade_cc_to_c_warning[] =
N_("only found copies from modified paths due to too many files.");
static const char rename_limit_advice[] =
N_("you may want to set your %s variable to at least "
"%d and retry the command.");
void diff_warn_rename_limit(const char *varname, int needed, int degraded_cc)
{
fflush(stdout);
if (degraded_cc)
warning(_(degrade_cc_to_c_warning));
else if (needed)
warning(_(rename_limit_warning));
else
return;
if (0 < needed)
warning(_(rename_limit_advice), varname, needed);
}
static void diff_flush_patch_all_file_pairs(struct diff_options *o)
{
int i;
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
static struct emitted_diff_symbols esm = EMITTED_DIFF_SYMBOLS_INIT;
struct diff_queue_struct *q = &diff_queued_diff;
if (WSEH_NEW & WS_RULE_MASK)
BUG("WS rules bit mask overlaps with diff symbol flags");
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
if (o->color_moved)
o->emitted_symbols = &esm;
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
if (check_pair_status(p))
diff_flush_patch(p, o);
}
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
if (o->emitted_symbols) {
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
if (o->color_moved) {
struct hashmap add_lines, del_lines;
diff.c: add white space mode to move detection that allows indent changes The option of --color-moved has proven to be useful as observed on the mailing list. However when refactoring sometimes the indentation changes, for example when partitioning a functions into smaller helper functions the code usually mostly moved around except for a decrease in indentation. To just review the moved code ignoring the change in indentation, a mode to ignore spaces in the move detection as implemented in a previous patch would be enough. However the whole move coloring as motivated in commit 2e2d5ac (diff.c: color moved lines differently, 2017-06-30), brought up the notion of the reviewer being able to trust the move of a "block". As there are languages such as python, which depend on proper relative indentation for the control flow of the program, ignoring any white space change in a block would not uphold the promises of 2e2d5ac that allows reviewers to pay less attention to the inside of a block, as inside the reviewer wants to assume the same program flow. This new mode of white space ignorance will take this into account and will only allow the same white space changes per line in each block. This patch even allows only for the same change at the beginning of the lines. As this is a white space mode, it is made exclusive to other white space modes in the move detection. This patch brings some challenges, related to the detection of blocks. We need a wide net to catch the possible moved lines, but then need to narrow down to check if the blocks are still intact. Consider this example (ignoring block sizes): - A - B - C + A + B + C At the beginning of a block when checking if there is a counterpart for A, we have to ignore all space changes. However at the following lines we have to check if the indent change stayed the same. Checking if the indentation change did stay the same, is done by computing the indentation change by the difference in line length, and then assume the change is only in the beginning of the longer line, the common tail is the same. That is why the test contains lines like: - <TAB> A ... + A <TAB> ... As the first line starting a block is caught using a compare function that ignores white spaces unlike the rest of the block, where the white space delta is taken into account for the comparison, we also have to think about the following situation: - A - B - A - B + A + B + A + B When checking if the first A (both in the + and - lines) is a start of a block, we have to check all 'A' and record all the white space deltas such that we can find the example above to be just one block that is indented. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-19 03:31:55 +08:00
if (o->color_moved_ws_handling &
COLOR_MOVED_WS_ALLOW_INDENTATION_CHANGE)
o->color_moved_ws_handling |= XDF_IGNORE_WHITESPACE;
hashmap_init(&del_lines, moved_entry_cmp, o, 0);
hashmap_init(&add_lines, moved_entry_cmp, o, 0);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
add_lines_to_move_detection(o, &add_lines, &del_lines);
mark_color_as_moved(o, &add_lines, &del_lines);
if (o->color_moved == COLOR_MOVED_ZEBRA_DIM)
dim_moved_lines(o);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
hashmap_free(&add_lines, 1);
hashmap_free(&del_lines, 1);
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
}
diff.c: buffer all output if asked to Introduce a new option 'emitted_symbols' in the struct diff_options which controls whether all output is buffered up until all output is available. It is set internally in diff.c when necessary. We'll have a new struct 'emitted_string' in diff.c which will be used to buffer each line. The emitted_string will duplicate the memory of the line to buffer as that is easiest to reason about for now. In a future patch we may want to decrease the memory usage by not duplicating all output for buffering but rather we may want to store offsets into the file or in case of hunk descriptions such as the similarity score, we could just store the relevant number and reproduce the text later on. This approach was chosen as a first step because it is quite simple compared to the alternative with less memory footprint. emit_diff_symbol factors out the emission part and depending on the diff_options->emitted_symbols the emission will be performed directly when calling emit_diff_symbol or after the whole process is done, i.e. by buffering we have add the possibility for a second pass over the whole output before doing the actual output. In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with word-diff) we introduced a duplicate diff options struct for word emissions as we may have different regex settings in there. When buffering the output, we need to operate on just one buffer, so we have to copy back the emissions of the word buffer into the main buffer. Unconditionally enable output via buffer in this patch as it yields a great opportunity for testing, i.e. all the diff tests from the test suite pass without having reordering issues (i.e. only parts of the output got buffered, and we forgot to buffer other parts). The test suite passes, which gives confidence that we converted all functions to use emit_string for output. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30 08:07:06 +08:00
for (i = 0; i < esm.nr; i++)
emit_diff_symbol_from_struct(o, &esm.buf[i]);
for (i = 0; i < esm.nr; i++)
free((void *)esm.buf[i].line);
}
esm.nr = 0;
}
void diff_flush(struct diff_options *options)
{
struct diff_queue_struct *q = &diff_queued_diff;
int i, output_format = options->output_format;
int separator = 0;
New --dirstat=lines mode, doing dirstat analysis based on diffstat This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:21 +08:00
int dirstat_by_line = 0;
/*
* Order: raw, stat, summary, patch
* or: name/name-status/checkdiff (other bits clear)
*/
if (!q->nr)
goto free_queue;
if (output_format & (DIFF_FORMAT_RAW |
DIFF_FORMAT_NAME |
DIFF_FORMAT_NAME_STATUS |
DIFF_FORMAT_CHECKDIFF)) {
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
if (check_pair_status(p))
flush_one_pair(p, options);
}
separator++;
}
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (output_format & DIFF_FORMAT_DIRSTAT && options->flags.dirstat_by_line)
New --dirstat=lines mode, doing dirstat analysis based on diffstat This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:21 +08:00
dirstat_by_line = 1;
if (output_format & (DIFF_FORMAT_DIFFSTAT|DIFF_FORMAT_SHORTSTAT|DIFF_FORMAT_NUMSTAT) ||
dirstat_by_line) {
struct diffstat_t diffstat;
memset(&diffstat, 0, sizeof(struct diffstat_t));
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
if (check_pair_status(p))
diff_flush_stat(p, options, &diffstat);
}
if (output_format & DIFF_FORMAT_NUMSTAT)
show_numstat(&diffstat, options);
if (output_format & DIFF_FORMAT_DIFFSTAT)
show_stats(&diffstat, options);
if (output_format & DIFF_FORMAT_SHORTSTAT)
show_shortstats(&diffstat, options);
if (output_format & DIFF_FORMAT_DIRSTAT && dirstat_by_line)
New --dirstat=lines mode, doing dirstat analysis based on diffstat This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:21 +08:00
show_dirstat_by_line(&diffstat, options);
free_diffstat_info(&diffstat);
separator++;
}
New --dirstat=lines mode, doing dirstat analysis based on diffstat This patch adds an alternative implementation of show_dirstat(), called show_dirstat_by_line(), which uses the more expensive diffstat analysis (as opposed to show_dirstat()'s own (relatively inexpensive) analysis) to derive the numbers from which the --dirstat output is computed. The alternative implementation is controlled by the new "lines" parameter to the --dirstat option (or the diff.dirstat config variable). For binary files, the diffstat analysis counts bytes instead of lines, so to prevent binary files from dominating the dirstat results, the byte counts for binary files are divided by 64 before being compared to their textual/line-based counterparts. This is a stupid and ugly - but very cheap - heuristic. In linux-2.6.git, running the three different --dirstat modes: time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null vs. time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null yields the following average runtimes on my machine: - "changes" (default): ~6.0 s - "lines": ~9.6 s - "files": ~0.1 s So, as expected, there's a considerable performance hit (~60%) by going through the full diffstat analysis as compared to the default "changes" analysis (obviously, "files" is much faster than both). As such, the "lines" mode is probably only useful if you really need the --dirstat numbers to be consistent with the numbers returned from the other --*stat options. The patch also includes documentation and tests for the new dirstat mode. Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-29 17:36:21 +08:00
if ((output_format & DIFF_FORMAT_DIRSTAT) && !dirstat_by_line)
show_dirstat(options);
if (output_format & DIFF_FORMAT_SUMMARY && !is_summary_empty(q)) {
for (i = 0; i < q->nr; i++) {
diff_summary(options, q->queue[i]);
}
separator++;
}
if (output_format & DIFF_FORMAT_NO_OUTPUT &&
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.exit_with_status &&
options->flags.diff_from_contents) {
/*
* run diff_flush_patch for the exit status. setting
* options->file to /dev/null should be safe, because we
* aren't supposed to produce any output anyway.
*/
if (options->close_file)
fclose(options->file);
options->file = xfopen("/dev/null", "w");
options->close_file = 1;
diff.c: color moved lines differently When a patch consists mostly of moving blocks of code around, it can be quite tedious to ensure that the blocks are moved verbatim, and not undesirably modified in the move. To that end, color blocks that are moved within the same patch differently. For example (OM, del, add, and NM are different colors): [OM] -void sensitive_stuff(void) [OM] -{ [OM] - if (!is_authorized_user()) [OM] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OM] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NM] + sensitive_stuff(spanning, [NM] + multiple, [NM] + lines); [NM] +} However adjacent blocks may be problematic. For example, in this potentially malicious patch, the swapping of blocks can be spotted: [OM] -void sensitive_stuff(void) [OM] -{ [OMA] - if (!is_authorized_user()) [OMA] - die("unauthorized"); [OM] - sensitive_stuff(spanning, [OM] - multiple, [OM] - lines); [OMA] -} void another_function() { [del] - printf("foo"); [add] + printf("bar"); } [NM] +void sensitive_stuff(void) [NM] +{ [NMA] + sensitive_stuff(spanning, [NMA] + multiple, [NMA] + lines); [NM] + if (!is_authorized_user()) [NM] + die("unauthorized"); [NMA] +} If the moved code is larger, it is easier to hide some permutation in the code, which is why some alternative coloring is needed. This patch implements the first mode: * basic alternating 'Zebra' mode This conveys all information needed to the user. Defer customization to later patches. First I implemented an alternative design, which would try to fingerprint a line by its neighbors to detect if we are in a block or at the boundary. This idea iss error prone as it inspected each line and its neighboring lines to determine if the line was (a) moved and (b) if was deep inside a hunk by having matching neighboring lines. This is unreliable as the we can construct hunks which have equal neighbors that just exceed the number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter as a line, that is permutated to AXYZCXYZBXYZD..'). Instead this provides a dynamic programming greedy algorithm that finds the largest moved hunk and then has several modes on highlighting bounds. A note on the options '--submodule=diff' and '--color-words/--word-diff': In the conversion to use emit_line in the prior patches both submodules as well as word diff output carefully chose to call emit_line with sign=0. All output with sign=0 is ignored for move detection purposes in this patch, such that no weird looking output will be generated for these cases. This leads to another thought: We could pass on '--color-moved' to submodules such that they color up moved lines for themselves. If we'd do so only line moves within a repository boundary are marked up. It is useful to have moved lines colored, but there are annoying corner cases, such as a single line moved, that is very common. For example in a typical patch of C code, we have closing braces that end statement blocks or functions. While it is technically true that these lines are moved as they show up elsewhere, it is harmful for the review as the reviewers attention is drawn to such a minor side annoyance. For now let's have a simple solution of hardcoding the number of moved lines to be at least 3 before coloring them. Note, that the length is applied across all blocks to find the 'lonely' blocks that pollute new code, but do not interfere with a permutated block where each permutation has less lines than 3. Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-01 04:53:07 +08:00
options->color_moved = 0;
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
if (check_pair_status(p))
diff_flush_patch(p, options);
if (options->found_changes)
break;
}
}
if (output_format & DIFF_FORMAT_PATCH) {
if (separator) {
emit_diff_symbol(options, DIFF_SYMBOL_SEPARATOR, NULL, 0, 0);
if (options->stat_sep)
/* attach patch instead of inline */
emit_diff_symbol(options, DIFF_SYMBOL_STAT_SEP,
NULL, 0, 0);
}
diff_flush_patch_all_file_pairs(options);
}
if (output_format & DIFF_FORMAT_CALLBACK)
options->format_callback(q, options, options->format_callback_data);
for (i = 0; i < q->nr; i++)
diff_free_filepair(q->queue[i]);
free_queue:
free(q->queue);
DIFF_QUEUE_CLEAR(q);
if (options->close_file)
fclose(options->file);
/*
* Report the content-level differences with HAS_CHANGES;
* diff_addremove/diff_change does not set the bit when
* DIFF_FROM_CONTENTS is in effect (e.g. with -w).
*/
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.diff_from_contents) {
if (options->found_changes)
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.has_changes = 1;
else
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.has_changes = 0;
}
}
static int match_filter(const struct diff_options *options, const struct diff_filepair *p)
{
return (((p->status == DIFF_STATUS_MODIFIED) &&
((p->score &&
filter_bit_tst(DIFF_STATUS_FILTER_BROKEN, options)) ||
(!p->score &&
filter_bit_tst(DIFF_STATUS_MODIFIED, options)))) ||
((p->status != DIFF_STATUS_MODIFIED) &&
filter_bit_tst(p->status, options)));
}
static void diffcore_apply_filter(struct diff_options *options)
{
int i;
struct diff_queue_struct *q = &diff_queued_diff;
struct diff_queue_struct outq;
DIFF_QUEUE_CLEAR(&outq);
if (!options->filter)
return;
if (filter_bit_tst(DIFF_STATUS_FILTER_AON, options)) {
int found;
for (i = found = 0; !found && i < q->nr; i++) {
if (match_filter(options, q->queue[i]))
found++;
}
if (found)
return;
/* otherwise we will clear the whole queue
* by copying the empty outq at the end of this
* function, but first clear the current entries
* in the queue.
*/
for (i = 0; i < q->nr; i++)
diff_free_filepair(q->queue[i]);
}
else {
/* Only the matching ones */
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
if (match_filter(options, p))
diff_q(&outq, p);
else
diff_free_filepair(p);
}
}
free(q->queue);
*q = outq;
}
/* Check whether two filespecs with the same mode and size are identical */
static int diff_filespec_is_identical(struct repository *r,
struct diff_filespec *one,
struct diff_filespec *two)
{
if (S_ISGITLINK(one->mode))
return 0;
if (diff_populate_filespec(r, one, 0))
return 0;
if (diff_populate_filespec(r, two, 0))
return 0;
return !memcmp(one->data, two->data, one->size);
}
static int diff_filespec_check_stat_unmatch(struct repository *r,
struct diff_filepair *p)
{
if (p->done_skip_stat_unmatch)
return p->skip_stat_unmatch_result;
p->done_skip_stat_unmatch = 1;
p->skip_stat_unmatch_result = 0;
/*
* 1. Entries that come from stat info dirtiness
* always have both sides (iow, not create/delete),
* one side of the object name is unknown, with
* the same mode and size. Keep the ones that
* do not match these criteria. They have real
* differences.
*
* 2. At this point, the file is known to be modified,
* with the same mode and size, and the object
* name of one side is unknown. Need to inspect
* the identical contents.
*/
if (!DIFF_FILE_VALID(p->one) || /* (1) */
!DIFF_FILE_VALID(p->two) ||
(p->one->oid_valid && p->two->oid_valid) ||
(p->one->mode != p->two->mode) ||
diff_populate_filespec(r, p->one, CHECK_SIZE_ONLY) ||
diff_populate_filespec(r, p->two, CHECK_SIZE_ONLY) ||
(p->one->size != p->two->size) ||
!diff_filespec_is_identical(r, p->one, p->two)) /* (2) */
p->skip_stat_unmatch_result = 1;
return p->skip_stat_unmatch_result;
}
static void diffcore_skip_stat_unmatch(struct diff_options *diffopt)
{
int i;
struct diff_queue_struct *q = &diff_queued_diff;
struct diff_queue_struct outq;
DIFF_QUEUE_CLEAR(&outq);
for (i = 0; i < q->nr; i++) {
struct diff_filepair *p = q->queue[i];
if (diff_filespec_check_stat_unmatch(diffopt->repo, p))
diff_q(&outq, p);
else {
/*
* The caller can subtract 1 from skip_stat_unmatch
* to determine how many paths were dirty only
* due to stat info mismatch.
*/
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (!diffopt->flags.no_index)
diffopt->skip_stat_unmatch++;
diff_free_filepair(p);
}
}
free(q->queue);
*q = outq;
}
unpack-trees.c: look ahead in the index This makes the traversal of index be in sync with the tree traversal. When unpack_callback() is fed a set of tree entries from trees, it inspects the name of the entry and checks if the an index entry with the same name could be hiding behind the current index entry, and (1) if the name appears in the index as a leaf node, it is also fed to the n_way_merge() callback function; (2) if the name is a directory in the index, i.e. there are entries in that are underneath it, then nothing is fed to the n_way_merge() callback function; (3) otherwise, if the name comes before the first eligible entry in the index, the index entry is first unpacked alone. When traverse_trees_recursive() descends into a subdirectory, the cache_bottom pointer is moved to walk index entries within that directory. All of these are omitted for diff-index, which does not even want to be fed an index entry and a tree entry with D/F conflicts. This fixes 3-way read-tree and exposes a bug in other parts of the system in t6035, test #5. The test prepares these three trees: O = HEAD^ 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b/c/d 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/x A = HEAD 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b/c/d 100644 blob 587be6b4c3f93f93c489c0111bba5596147a26cb a/x B = master 120000 blob a36b77384451ea1de7bd340ffca868249626bc52 a/b 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/x With a clean index that matches HEAD, running git read-tree -m -u --aggressive $O $A $B now yields 120000 a36b77384451ea1de7bd340ffca868249626bc52 3 a/b 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 a/b-2/c/d 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 1 a/b/c/d 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 2 a/b/c/d 100644 587be6b4c3f93f93c489c0111bba5596147a26cb 0 a/x which is correct. "master" created "a/b" symlink that did not exist, and removed "a/b/c/d" while HEAD did not do touch either path. Before this series, read-tree did not notice the situation and resolved addition of "a/b" and removal of "a/b/c/d" independently. If A = HEAD had another path "a/b/c/e" added, this merge should conflict but instead it silently resolved "a/b" and then immediately overwrote it to add "a/b/c/e", which was quite bogus. Tests in t1012 start to work with this. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-20 15:03:39 +08:00
static int diffnamecmp(const void *a_, const void *b_)
{
const struct diff_filepair *a = *((const struct diff_filepair **)a_);
const struct diff_filepair *b = *((const struct diff_filepair **)b_);
const char *name_a, *name_b;
name_a = a->one ? a->one->path : a->two->path;
name_b = b->one ? b->one->path : b->two->path;
return strcmp(name_a, name_b);
}
void diffcore_fix_diff_index(struct diff_options *options)
{
struct diff_queue_struct *q = &diff_queued_diff;
QSORT(q->queue, q->nr, diffnamecmp);
unpack-trees.c: look ahead in the index This makes the traversal of index be in sync with the tree traversal. When unpack_callback() is fed a set of tree entries from trees, it inspects the name of the entry and checks if the an index entry with the same name could be hiding behind the current index entry, and (1) if the name appears in the index as a leaf node, it is also fed to the n_way_merge() callback function; (2) if the name is a directory in the index, i.e. there are entries in that are underneath it, then nothing is fed to the n_way_merge() callback function; (3) otherwise, if the name comes before the first eligible entry in the index, the index entry is first unpacked alone. When traverse_trees_recursive() descends into a subdirectory, the cache_bottom pointer is moved to walk index entries within that directory. All of these are omitted for diff-index, which does not even want to be fed an index entry and a tree entry with D/F conflicts. This fixes 3-way read-tree and exposes a bug in other parts of the system in t6035, test #5. The test prepares these three trees: O = HEAD^ 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b/c/d 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/x A = HEAD 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b/c/d 100644 blob 587be6b4c3f93f93c489c0111bba5596147a26cb a/x B = master 120000 blob a36b77384451ea1de7bd340ffca868249626bc52 a/b 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/b-2/c/d 100644 blob e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 a/x With a clean index that matches HEAD, running git read-tree -m -u --aggressive $O $A $B now yields 120000 a36b77384451ea1de7bd340ffca868249626bc52 3 a/b 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 a/b-2/c/d 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 1 a/b/c/d 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 2 a/b/c/d 100644 587be6b4c3f93f93c489c0111bba5596147a26cb 0 a/x which is correct. "master" created "a/b" symlink that did not exist, and removed "a/b/c/d" while HEAD did not do touch either path. Before this series, read-tree did not notice the situation and resolved addition of "a/b" and removal of "a/b/c/d" independently. If A = HEAD had another path "a/b/c/e" added, this merge should conflict but instead it silently resolved "a/b" and then immediately overwrote it to add "a/b/c/e", which was quite bogus. Tests in t1012 start to work with this. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-20 15:03:39 +08:00
}
void diffcore_std(struct diff_options *options)
{
combine-diff: speed it up, by using multiparent diff tree-walker directly As was recently shown in "combine-diff: optimize combine_diff_path sets intersection", combine-diff runs very slowly. In that commit we optimized paths sets intersection, but that accounted only for ~ 25% of the slowness, and as my tracing showed, for linux.git v3.10..v3.11, for merges a lot of time is spent computing diff(commit,commit^2) just to only then intersect that huge diff to almost small set of files from diff(commit,commit^1). In previous commit, we described the problem in more details, and reworked the diff tree-walker to be general one - i.e. to work in multiple parent case too. Now is the time to take advantage of it for finding paths for combine diff. The implementation is straightforward - if we know, we can get generated diff paths directly, and at present that means no diff filtering or rename/copy detection was requested(*), we can call multiparent tree-walker directly and get ready paths. (*) because e.g. at present, all diffcore transformations work on diff_filepair queues, but in the future, that limitation can be lifted, if filters would operate directly on combine_diff_paths. Timings for `git log --raw --no-abbrev --no-renames` without `-c` ("git log") and with `-c` ("git log -c") and with `-c --merges` ("git log -c --merges") before and after the patch are as follows: linux.git v3.10..v3.11 log log -c log -c --merges before 1.9s 16.4s 15.2s after 1.9s 2.4s 1.1s The result stayed the same. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-25 00:21:51 +08:00
/* NOTE please keep the following in sync with diff_tree_combined() */
if (options->skip_stat_unmatch)
diffcore_skip_stat_unmatch(options);
if (!options->found_follow) {
/* See try_to_follow_renames() in tree-diff.c */
if (options->break_opt != -1)
diffcore_break(options->repo,
options->break_opt);
if (options->detect_rename)
diffcore_rename(options);
if (options->break_opt != -1)
diffcore_merge_broken();
}
if (options->pickaxe_opts & DIFF_PICKAXE_KINDS_MASK)
diffcore_pickaxe(options);
if (options->orderfile)
diffcore_order(options->orderfile);
if (!options->found_follow)
/* See try_to_follow_renames() in tree-diff.c */
diff_resolve_rename_copy();
diffcore_apply_filter(options);
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (diff_queued_diff.nr && !options->flags.diff_from_contents)
options->flags.has_changes = 1;
else
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.has_changes = 0;
options->found_follow = 0;
}
int diff_result_code(struct diff_options *opt, int status)
{
int result = 0;
diff_warn_rename_limit("diff.renameLimit",
opt->needed_rename_limit,
opt->degraded_cc_to_c);
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (!opt->flags.exit_with_status &&
!(opt->output_format & DIFF_FORMAT_CHECKDIFF))
return status;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (opt->flags.exit_with_status &&
opt->flags.has_changes)
result |= 01;
if ((opt->output_format & DIFF_FORMAT_CHECKDIFF) &&
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
opt->flags.check_failed)
result |= 02;
return result;
}
int diff_can_quit_early(struct diff_options *opt)
{
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
return (opt->flags.quick &&
!opt->filter &&
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
opt->flags.has_changes);
}
Submodules: Add the new "ignore" config option for diff and status The new "ignore" config option controls the default behavior for "git status" and the diff family. It specifies under what circumstances they consider submodules as modified and can be set separately for each submodule. The command line option "--ignore-submodules=" has been extended to accept the new parameter "none" for both status and diff. Users that chose submodules to get rid of long work tree scanning times might want to set the "dirty" option for those submodules. This brings back the pre 1.7.0 behavior, where submodule work trees were never scanned for modifications. By using "--ignore-submodules=none" on the command line the status and diff commands can be told to do a full scan. This option can be set to the following values (which have the same name and meaning as for the "--ignore-submodules" option of status and diff): "all": All changes to the submodule will be ignored. "dirty": Only differences of the commit recorded in the superproject and the submodules HEAD will be considered modifications, all changes to the work tree of the submodule will be ignored. When using this value, the submodule will not be scanned for work tree changes at all, leading to a performance benefit on large submodules. "untracked": Only untracked files in the submodules work tree are ignored, a changed HEAD and/or modified files in the submodule will mark it as modified. "none" (which is the default): Either untracked or modified files in a submodules work tree or a difference between the subdmodules HEAD and the commit recorded in the superproject will make it show up as changed. This value is added as a new parameter for the "--ignore-submodules" option of the diff family and "git status" so the user can override the settings in the configuration. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06 06:39:25 +08:00
/*
* Shall changes to this submodule be ignored?
*
* Submodule changes can be configured to be ignored separately for each path,
* but that configuration can be overridden from the command line.
*/
static int is_submodule_ignored(const char *path, struct diff_options *options)
{
int ignored = 0;
struct diff_flags orig_flags = options->flags;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (!options->flags.override_submodule_config)
Submodules: Add the new "ignore" config option for diff and status The new "ignore" config option controls the default behavior for "git status" and the diff family. It specifies under what circumstances they consider submodules as modified and can be set separately for each submodule. The command line option "--ignore-submodules=" has been extended to accept the new parameter "none" for both status and diff. Users that chose submodules to get rid of long work tree scanning times might want to set the "dirty" option for those submodules. This brings back the pre 1.7.0 behavior, where submodule work trees were never scanned for modifications. By using "--ignore-submodules=none" on the command line the status and diff commands can be told to do a full scan. This option can be set to the following values (which have the same name and meaning as for the "--ignore-submodules" option of status and diff): "all": All changes to the submodule will be ignored. "dirty": Only differences of the commit recorded in the superproject and the submodules HEAD will be considered modifications, all changes to the work tree of the submodule will be ignored. When using this value, the submodule will not be scanned for work tree changes at all, leading to a performance benefit on large submodules. "untracked": Only untracked files in the submodules work tree are ignored, a changed HEAD and/or modified files in the submodule will mark it as modified. "none" (which is the default): Either untracked or modified files in a submodules work tree or a difference between the subdmodules HEAD and the commit recorded in the superproject will make it show up as changed. This value is added as a new parameter for the "--ignore-submodules" option of the diff family and "git status" so the user can override the settings in the configuration. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06 06:39:25 +08:00
set_diffopt_flags_from_submodule_config(options, path);
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.ignore_submodules)
Submodules: Add the new "ignore" config option for diff and status The new "ignore" config option controls the default behavior for "git status" and the diff family. It specifies under what circumstances they consider submodules as modified and can be set separately for each submodule. The command line option "--ignore-submodules=" has been extended to accept the new parameter "none" for both status and diff. Users that chose submodules to get rid of long work tree scanning times might want to set the "dirty" option for those submodules. This brings back the pre 1.7.0 behavior, where submodule work trees were never scanned for modifications. By using "--ignore-submodules=none" on the command line the status and diff commands can be told to do a full scan. This option can be set to the following values (which have the same name and meaning as for the "--ignore-submodules" option of status and diff): "all": All changes to the submodule will be ignored. "dirty": Only differences of the commit recorded in the superproject and the submodules HEAD will be considered modifications, all changes to the work tree of the submodule will be ignored. When using this value, the submodule will not be scanned for work tree changes at all, leading to a performance benefit on large submodules. "untracked": Only untracked files in the submodules work tree are ignored, a changed HEAD and/or modified files in the submodule will mark it as modified. "none" (which is the default): Either untracked or modified files in a submodules work tree or a difference between the subdmodules HEAD and the commit recorded in the superproject will make it show up as changed. This value is added as a new parameter for the "--ignore-submodules" option of the diff family and "git status" so the user can override the settings in the configuration. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06 06:39:25 +08:00
ignored = 1;
options->flags = orig_flags;
return ignored;
}
void diff_addremove(struct diff_options *options,
int addremove, unsigned mode,
const struct object_id *oid,
int oid_valid,
const char *concatpath, unsigned dirty_submodule)
{
struct diff_filespec *one, *two;
Submodules: Add the new "ignore" config option for diff and status The new "ignore" config option controls the default behavior for "git status" and the diff family. It specifies under what circumstances they consider submodules as modified and can be set separately for each submodule. The command line option "--ignore-submodules=" has been extended to accept the new parameter "none" for both status and diff. Users that chose submodules to get rid of long work tree scanning times might want to set the "dirty" option for those submodules. This brings back the pre 1.7.0 behavior, where submodule work trees were never scanned for modifications. By using "--ignore-submodules=none" on the command line the status and diff commands can be told to do a full scan. This option can be set to the following values (which have the same name and meaning as for the "--ignore-submodules" option of status and diff): "all": All changes to the submodule will be ignored. "dirty": Only differences of the commit recorded in the superproject and the submodules HEAD will be considered modifications, all changes to the work tree of the submodule will be ignored. When using this value, the submodule will not be scanned for work tree changes at all, leading to a performance benefit on large submodules. "untracked": Only untracked files in the submodules work tree are ignored, a changed HEAD and/or modified files in the submodule will mark it as modified. "none" (which is the default): Either untracked or modified files in a submodules work tree or a difference between the subdmodules HEAD and the commit recorded in the superproject will make it show up as changed. This value is added as a new parameter for the "--ignore-submodules" option of the diff family and "git status" so the user can override the settings in the configuration. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06 06:39:25 +08:00
if (S_ISGITLINK(mode) && is_submodule_ignored(concatpath, options))
return;
/* This may look odd, but it is a preparation for
* feeding "there are unchanged files which should
* not produce diffs, but when you are doing copy
* detection you would need them, so here they are"
* entries to the diff-core. They will be prefixed
* with something like '=' or '*' (I haven't decided
* which but should not make any difference).
* Feeding the same new and old to diff_change()
* also has the same effect.
* Before the final output happens, they are pruned after
* merged into rename/copy pairs as appropriate.
*/
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.reverse_diff)
addremove = (addremove == '+' ? '-' :
addremove == '-' ? '+' : addremove);
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
if (options->prefix &&
strncmp(concatpath, options->prefix, options->prefix_length))
return;
one = alloc_filespec(concatpath);
two = alloc_filespec(concatpath);
if (addremove != '+')
fill_filespec(one, oid, oid_valid, mode);
if (addremove != '-') {
fill_filespec(two, oid, oid_valid, mode);
two->dirty_submodule = dirty_submodule;
}
diff_queue(&diff_queued_diff, one, two);
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (!options->flags.diff_from_contents)
options->flags.has_changes = 1;
}
void diff_change(struct diff_options *options,
unsigned old_mode, unsigned new_mode,
const struct object_id *old_oid,
const struct object_id *new_oid,
int old_oid_valid, int new_oid_valid,
const char *concatpath,
unsigned old_dirty_submodule, unsigned new_dirty_submodule)
{
struct diff_filespec *one, *two;
struct diff_filepair *p;
Submodules: Add the new "ignore" config option for diff and status The new "ignore" config option controls the default behavior for "git status" and the diff family. It specifies under what circumstances they consider submodules as modified and can be set separately for each submodule. The command line option "--ignore-submodules=" has been extended to accept the new parameter "none" for both status and diff. Users that chose submodules to get rid of long work tree scanning times might want to set the "dirty" option for those submodules. This brings back the pre 1.7.0 behavior, where submodule work trees were never scanned for modifications. By using "--ignore-submodules=none" on the command line the status and diff commands can be told to do a full scan. This option can be set to the following values (which have the same name and meaning as for the "--ignore-submodules" option of status and diff): "all": All changes to the submodule will be ignored. "dirty": Only differences of the commit recorded in the superproject and the submodules HEAD will be considered modifications, all changes to the work tree of the submodule will be ignored. When using this value, the submodule will not be scanned for work tree changes at all, leading to a performance benefit on large submodules. "untracked": Only untracked files in the submodules work tree are ignored, a changed HEAD and/or modified files in the submodule will mark it as modified. "none" (which is the default): Either untracked or modified files in a submodules work tree or a difference between the subdmodules HEAD and the commit recorded in the superproject will make it show up as changed. This value is added as a new parameter for the "--ignore-submodules" option of the diff family and "git status" so the user can override the settings in the configuration. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-06 06:39:25 +08:00
if (S_ISGITLINK(old_mode) && S_ISGITLINK(new_mode) &&
is_submodule_ignored(concatpath, options))
return;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.reverse_diff) {
SWAP(old_mode, new_mode);
SWAP(old_oid, new_oid);
SWAP(old_oid_valid, new_oid_valid);
SWAP(old_dirty_submodule, new_dirty_submodule);
}
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
if (options->prefix &&
strncmp(concatpath, options->prefix, options->prefix_length))
return;
one = alloc_filespec(concatpath);
two = alloc_filespec(concatpath);
fill_filespec(one, old_oid, old_oid_valid, old_mode);
fill_filespec(two, new_oid, new_oid_valid, new_mode);
one->dirty_submodule = old_dirty_submodule;
two->dirty_submodule = new_dirty_submodule;
p = diff_queue(&diff_queued_diff, one, two);
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.diff_from_contents)
return;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (options->flags.quick && options->skip_stat_unmatch &&
!diff_filespec_check_stat_unmatch(options->repo, p))
return;
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
options->flags.has_changes = 1;
}
struct diff_filepair *diff_unmerge(struct diff_options *options, const char *path)
{
struct diff_filepair *pair;
struct diff_filespec *one, *two;
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
if (options->prefix &&
strncmp(path, options->prefix, options->prefix_length))
return NULL;
diff --relative: output paths as relative to the current subdirectory This adds --relative option to the diff family. When you start from a subdirectory: $ git diff --relative shows only the diff that is inside your current subdirectory, and without $prefix part. People who usually live in subdirectories may like it. There are a few things I should also mention about the change: - This works not just with diff but also works with the log family of commands, but the history pruning is not affected. In other words, if you go to a subdirectory, you can say: $ git log --relative -p but it will show the log message even for commits that do not touch the current directory. You can limit it by giving pathspec yourself: $ git log --relative -p . This originally was not a conscious design choice, but we have a way to affect diff pathspec and pruning pathspec independently. IOW "git log --full-diff -p ." tells it to prune history to commits that affect the current subdirectory but show the changes with full context. I think it makes more sense to leave pruning independent from --relative than the obvious alternative of always pruning with the current subdirectory, which would break the symmetry. - Because this works also with the log family, you could format-patch a single change, limiting the effect to your subdirectory, like so: $ cd gitk-git $ git format-patch -1 --relative 911f1eb But because that is a special purpose usage, this option will never become the default, with or without repository or user preference configuration. The risk of producing a partial patch and sending it out by mistake is too great if we did so. - This is inherently incompatible with --no-index, which is a bolted-on hack that does not have much to do with git itself. I didn't bother checking and erroring out on the combined use of the options, but probably I should. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-13 06:26:02 +08:00
one = alloc_filespec(path);
two = alloc_filespec(path);
pair = diff_queue(&diff_queued_diff, one, two);
pair->is_unmerged = 1;
return pair;
}
static char *run_textconv(struct repository *r,
const char *pgm,
struct diff_filespec *spec,
size_t *outsize)
{
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
struct diff_tempfile *temp;
const char *argv[3];
const char **arg = argv;
struct child_process child = CHILD_PROCESS_INIT;
struct strbuf buf = STRBUF_INIT;
int err = 0;
temp = prepare_temp_file(r, spec->path, spec);
*arg++ = pgm;
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
*arg++ = temp->name;
*arg = NULL;
child.use_shell = 1;
child.argv = argv;
child.out = -1;
if (start_command(&child)) {
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
remove_tempfile();
return NULL;
}
if (strbuf_read(&buf, child.out, 0) < 0)
err = error("error reading from textconv command '%s'", pgm);
close(child.out);
if (finish_command(&child) || err) {
strbuf_release(&buf);
remove_tempfile();
return NULL;
}
diff: refactor tempfile cleanup handling There are two pieces of code that create tempfiles for diff: run_external_diff and run_textconv. The former cleans up its tempfiles in the face of premature death (i.e., by die() or by signal), but the latter does not. After this patch, they will both use the same cleanup routines. To make clear what the change is, let me first explain what happens now: - run_external_diff uses a static global array of 2 diff_tempfile structs (since it knows it will always need exactly 2 tempfiles). It calls prepare_temp_file (which doesn't know anything about the global array) on each of the structs, creating the tempfiles that need to be cleaned up. It then registers atexit and signal handlers to look through the global array and remove the tempfiles. If it succeeds, it calls the handler manually (which marks the tempfile structs as unused). - textconv has its own tempfile struct, which it allocates using prepare_temp_file and cleans up manually. No signal or atexit handlers. The new code moves the installation of cleanup handlers into the prepare_temp_file function. Which means that that function now has to understand that there is static tempfile storage. So what happens now is: - run_external_diff calls prepare_temp_file - prepare_temp_file calls claim_diff_tempfile, which allocates an unused slot from our global array - prepare_temp_file installs (if they have not already been installed) atexit and signal handlers for cleanup - prepare_temp_file sets up the tempfile as usual - prepare_temp_file returns a pointer to the allocated tempfile The advantage being that run_external_diff no longer has to care about setting up cleanup handlers. Now by virtue of calling prepare_temp_file, run_textconv gets the same benefit, as will any future users of prepare_temp_file. There are also a few side benefits to the specific implementation: - we now install cleanup handlers _before_ allocating the tempfile, closing a race which could leave temp cruft - when allocating a slot in the global array, we will now detect a situation where the old slots were not properly vacated (i.e., somebody forgot to call remove upon leaving the function). In the old code, such a situation would silently overwrite the tempfile names, meaning we would forget to clean them up. The new code dies with a bug warning. - we make sure only to install the signal handler once. This isn't a big deal, since we are just overwriting the old handler, but will become an issue when a later patch converts the code to use sigchain Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-22 13:59:56 +08:00
remove_tempfile();
return strbuf_detach(&buf, outsize);
}
size_t fill_textconv(struct repository *r,
struct userdiff_driver *driver,
struct diff_filespec *df,
char **outbuf)
{
size_t size;
if (!driver) {
if (!DIFF_FILE_VALID(df)) {
*outbuf = "";
return 0;
}
if (diff_populate_filespec(r, df, 0))
die("unable to read files to diff");
*outbuf = df->data;
return df->size;
}
if (!driver->textconv)
BUG("fill_textconv called with non-textconv driver");
if (driver->textconv_cache && df->oid_valid) {
*outbuf = notes_cache_get(driver->textconv_cache,
&df->oid,
&size);
if (*outbuf)
return size;
}
*outbuf = run_textconv(r, driver->textconv, df, &size);
if (!*outbuf)
die("unable to read files to diff");
if (driver->textconv_cache && df->oid_valid) {
/* ignore errors, as we might be in a readonly repository */
notes_cache_put(driver->textconv_cache, &df->oid, *outbuf,
size);
/*
* we could save up changes and flush them all at the end,
* but we would need an extra call after all diffing is done.
* Since generating a cache entry is the slow path anyway,
* this extra overhead probably isn't a big deal.
*/
notes_cache_write(driver->textconv_cache);
}
return size;
}
int textconv_object(struct repository *r,
const char *path,
unsigned mode,
const struct object_id *oid,
int oid_valid,
char **buf,
unsigned long *buf_size)
{
struct diff_filespec *df;
struct userdiff_driver *textconv;
df = alloc_filespec(path);
fill_filespec(df, oid, oid_valid, mode);
textconv = get_textconv(r, df);
if (!textconv) {
free_filespec(df);
return 0;
}
*buf_size = fill_textconv(r, textconv, df, buf);
free_filespec(df);
return 1;
}
void setup_diff_pager(struct diff_options *opt)
{
/*
* If the user asked for our exit code, then either they want --quiet
* or --exit-code. We should definitely not bother with a pager in the
* former case, as we will generate no output. Since we still properly
* report our exit code even when a pager is run, we _could_ run a
* pager with --exit-code. But since we have not done so historically,
* and because it is easy to find people oneline advising "git diff
* --exit-code" in hooks and other scripts, we do not do so.
*/
diff: make struct diff_flags members lowercase Now that the flags stored in struct diff_flags are being accessed directly and not through macros, change all struct members from being uppercase to lowercase. This conversion is done using the following semantic patch: @@ expression E; @@ - E.RECURSIVE + E.recursive @@ expression E; @@ - E.TREE_IN_RECURSIVE + E.tree_in_recursive @@ expression E; @@ - E.BINARY + E.binary @@ expression E; @@ - E.TEXT + E.text @@ expression E; @@ - E.FULL_INDEX + E.full_index @@ expression E; @@ - E.SILENT_ON_REMOVE + E.silent_on_remove @@ expression E; @@ - E.FIND_COPIES_HARDER + E.find_copies_harder @@ expression E; @@ - E.FOLLOW_RENAMES + E.follow_renames @@ expression E; @@ - E.RENAME_EMPTY + E.rename_empty @@ expression E; @@ - E.HAS_CHANGES + E.has_changes @@ expression E; @@ - E.QUICK + E.quick @@ expression E; @@ - E.NO_INDEX + E.no_index @@ expression E; @@ - E.ALLOW_EXTERNAL + E.allow_external @@ expression E; @@ - E.EXIT_WITH_STATUS + E.exit_with_status @@ expression E; @@ - E.REVERSE_DIFF + E.reverse_diff @@ expression E; @@ - E.CHECK_FAILED + E.check_failed @@ expression E; @@ - E.RELATIVE_NAME + E.relative_name @@ expression E; @@ - E.IGNORE_SUBMODULES + E.ignore_submodules @@ expression E; @@ - E.DIRSTAT_CUMULATIVE + E.dirstat_cumulative @@ expression E; @@ - E.DIRSTAT_BY_FILE + E.dirstat_by_file @@ expression E; @@ - E.ALLOW_TEXTCONV + E.allow_textconv @@ expression E; @@ - E.TEXTCONV_SET_VIA_CMDLINE + E.textconv_set_via_cmdline @@ expression E; @@ - E.DIFF_FROM_CONTENTS + E.diff_from_contents @@ expression E; @@ - E.DIRTY_SUBMODULES + E.dirty_submodules @@ expression E; @@ - E.IGNORE_UNTRACKED_IN_SUBMODULES + E.ignore_untracked_in_submodules @@ expression E; @@ - E.IGNORE_DIRTY_SUBMODULES + E.ignore_dirty_submodules @@ expression E; @@ - E.OVERRIDE_SUBMODULE_CONFIG + E.override_submodule_config @@ expression E; @@ - E.DIRSTAT_BY_LINE + E.dirstat_by_line @@ expression E; @@ - E.FUNCCONTEXT + E.funccontext @@ expression E; @@ - E.PICKAXE_IGNORE_CASE + E.pickaxe_ignore_case @@ expression E; @@ - E.DEFAULT_FOLLOW_RENAMES + E.default_follow_renames Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-01 02:19:11 +08:00
if (!opt->flags.exit_with_status &&
check_pager_config("diff") != 0)
setup_pager();
}