generate-cmdlist: re-implement as shell script
527ec39 (generate-cmdlist: parse common group commands, 2015-05-21)
replaced generate-cmdlist.sh with a more functional Perl version,
generate-cmdlist.perl. The Perl version gleans named tags from a new
"common groups" section in command-list.txt and recognizes those
tags in "command list" section entries in place of the old 'common'
tag. This allows git-help to, not only recognize, but also group
common commands.
Although the tests require Perl, 527ec39 creates an unconditional
dependence upon Perl in the build system itself, which can not be
overridden with NO_PERL. Such a dependency may be undesirable; for
instance, the 'git-lite' package in the FreeBSD ports tree is
intended as a minimal Git installation (which may, for example, be
useful on servers needing only local clone and update capability),
which, historically, has not depended upon Perl[1].
Therefore, revive generate-cmdlist.sh and extend it to recognize
"common groups" and its named tags. Retire generate-cmdlist.perl.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/275905/focus=276132
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-24 05:31:09 +08:00
|
|
|
#!/bin/sh
|
|
|
|
|
2018-05-10 16:46:41 +08:00
|
|
|
die () {
|
|
|
|
echo "$@" >&2
|
|
|
|
exit 1
|
|
|
|
}
|
|
|
|
|
|
|
|
command_list () {
|
generate-cmdlist.sh: replace "grep' invocation with a shell version
Replace the "grep" we run to exclude certain programs from the
generated output with a pure-shell loop that strips out the comments,
and sees if the "cmd" we're reading is on a list of excluded
programs. This uses a trick similar to test_have_prereq() in
test-lib-functions.sh.
On my *nix system this makes things quite a bit slower compared to
HEAD~:
o
'sh generate-cmdlist.sh.old command-list.txt' ran
1.56 ± 0.11 times faster than 'sh generate-cmdlist.sh command-list.txt'
18.00 ± 0.19 times faster than 'sh generate-cmdlist.sh.master command-list.txt'
But when I tried running generate-cmdlist.sh 100 times in CI I found
that it helped across the board even on OSX & Linux. I tried testing
it in CI with this ad-hoc few-liner:
for i in $(seq -w 0 11 | sort -nr)
do
git show HEAD~$i:generate-cmdlist.sh >generate-cmdlist-HEAD$i.sh &&
git add generate-cmdlist* &&
cp t/t0000-generate-cmdlist.sh t/t00$i-generate-cmdlist.sh || : &&
perl -pi -e "s/HEAD0/HEAD$i/g" t/t00$i-generate-cmdlist.sh &&
git add t/t00*.sh
done && git commit -m"generated it"
Here HEAD~02 and the t0002* file refers to this change, and HEAD~03
and t0003* file to the preceding commit, the relevant results were:
linux-gcc:
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
[12:05:30] t0003-generate-cmdlist.sh .. ok 32 ms ( 0.00 usr 0.00 sys + 2.66 cusr 1.81 csys = 4.47 CPU)
osx-gcc:
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
[11:58:16] t0003-generate-cmdlist.sh .. ok 92127 ms ( 0.02 usr 0.01 sys + 22.54 cusr 14.27 csys = 36.84 CPU)
vs-test:
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
[12:03:20] t0003-generate-cmdlist.sh .. ok 32 s ( 0.00 usr 0.02 sys + 13.25 cusr 26.10 csys = 39.37 CPU)
I.e. even on *nix running 100 of these in a loop was up to ~2x faster
in absolute runtime, I suspect it's due factors that are exacerbated
in the CI, e.g. much slower process startup due to some platform
limits, or a slower FS.
The "cut -d" change here is because we're not emitting the
40-character aligned output anymore, i.e. we'll get the output from
command_list() now, not an as-is line from command-list.txt.
This also makes the parsing more reliable, as we could tweak the
whitespace alignment without breaking this parser. Let's reword a
now-inaccurate comment in "command-list.txt" describing that previous
alignment limitation. We'll still need the "### command-list [...]"
line due to the "Documentation/cmd-list.perl" logic added in
11c6659d85d (command-list: prepare machinery for upcoming "common
groups" section, 2015-05-21).
There was a proposed change subsequent to this one[3] which continued
moving more logic into the "command_list() function, i.e. replaced the
"cut | tr | grep" chain in "category_list()" with an argument to
"command_list()".
That change might have had a bit of an effect, but not as much as the
preceding commit, so I decided to drop it. The relevant performance
numbers from it were:
linux-gcc:
[12:05:33] t0001-generate-cmdlist.sh .. ok 13 ms ( 0.00 usr 0.00 sys + 3.33 cusr 2.78 csys = 6.11 CPU)
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
osx-gcc:
[11:58:03] t0001-generate-cmdlist.sh .. ok 78416 ms ( 0.02 usr 0.01 sys + 11.78 cusr 6.22 csys = 18.03 CPU)
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
vs-test:
[12:03:20] t0001-generate-cmdlist.sh .. ok 34 s ( 0.00 usr 0.03 sys + 12.42 cusr 19.55 csys = 32.00 CPU)
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
As above HEAD~2 and t0002* are testing the code in this commit (and
the line is the same), but HEAD~1 and t0001* are testing that dropped
change in [3].
1. https://lore.kernel.org/git/cover-v2-00.10-00000000000-20211022T193027Z-avarab@gmail.com/
2. https://lore.kernel.org/git/patch-v2-08.10-83318d6c0da-20211022T193027Z-avarab@gmail.com/
3. https://lore.kernel.org/git/patch-v2-10.10-e10a43756d1-20211022T193027Z-avarab@gmail.com/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-11-05 22:08:07 +08:00
|
|
|
while read cmd rest
|
|
|
|
do
|
|
|
|
case "$cmd" in
|
|
|
|
"#"* | '')
|
|
|
|
# Ignore comments and allow empty lines
|
|
|
|
continue
|
|
|
|
;;
|
|
|
|
*)
|
|
|
|
case "$exclude_programs" in
|
|
|
|
*":$cmd:"*)
|
|
|
|
;;
|
|
|
|
*)
|
|
|
|
echo "$cmd $rest"
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
esac
|
|
|
|
done <"$1"
|
2018-05-10 16:46:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
category_list () {
|
2021-11-05 22:08:08 +08:00
|
|
|
echo "$1" |
|
generate-cmdlist.sh: replace "grep' invocation with a shell version
Replace the "grep" we run to exclude certain programs from the
generated output with a pure-shell loop that strips out the comments,
and sees if the "cmd" we're reading is on a list of excluded
programs. This uses a trick similar to test_have_prereq() in
test-lib-functions.sh.
On my *nix system this makes things quite a bit slower compared to
HEAD~:
o
'sh generate-cmdlist.sh.old command-list.txt' ran
1.56 ± 0.11 times faster than 'sh generate-cmdlist.sh command-list.txt'
18.00 ± 0.19 times faster than 'sh generate-cmdlist.sh.master command-list.txt'
But when I tried running generate-cmdlist.sh 100 times in CI I found
that it helped across the board even on OSX & Linux. I tried testing
it in CI with this ad-hoc few-liner:
for i in $(seq -w 0 11 | sort -nr)
do
git show HEAD~$i:generate-cmdlist.sh >generate-cmdlist-HEAD$i.sh &&
git add generate-cmdlist* &&
cp t/t0000-generate-cmdlist.sh t/t00$i-generate-cmdlist.sh || : &&
perl -pi -e "s/HEAD0/HEAD$i/g" t/t00$i-generate-cmdlist.sh &&
git add t/t00*.sh
done && git commit -m"generated it"
Here HEAD~02 and the t0002* file refers to this change, and HEAD~03
and t0003* file to the preceding commit, the relevant results were:
linux-gcc:
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
[12:05:30] t0003-generate-cmdlist.sh .. ok 32 ms ( 0.00 usr 0.00 sys + 2.66 cusr 1.81 csys = 4.47 CPU)
osx-gcc:
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
[11:58:16] t0003-generate-cmdlist.sh .. ok 92127 ms ( 0.02 usr 0.01 sys + 22.54 cusr 14.27 csys = 36.84 CPU)
vs-test:
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
[12:03:20] t0003-generate-cmdlist.sh .. ok 32 s ( 0.00 usr 0.02 sys + 13.25 cusr 26.10 csys = 39.37 CPU)
I.e. even on *nix running 100 of these in a loop was up to ~2x faster
in absolute runtime, I suspect it's due factors that are exacerbated
in the CI, e.g. much slower process startup due to some platform
limits, or a slower FS.
The "cut -d" change here is because we're not emitting the
40-character aligned output anymore, i.e. we'll get the output from
command_list() now, not an as-is line from command-list.txt.
This also makes the parsing more reliable, as we could tweak the
whitespace alignment without breaking this parser. Let's reword a
now-inaccurate comment in "command-list.txt" describing that previous
alignment limitation. We'll still need the "### command-list [...]"
line due to the "Documentation/cmd-list.perl" logic added in
11c6659d85d (command-list: prepare machinery for upcoming "common
groups" section, 2015-05-21).
There was a proposed change subsequent to this one[3] which continued
moving more logic into the "command_list() function, i.e. replaced the
"cut | tr | grep" chain in "category_list()" with an argument to
"command_list()".
That change might have had a bit of an effect, but not as much as the
preceding commit, so I decided to drop it. The relevant performance
numbers from it were:
linux-gcc:
[12:05:33] t0001-generate-cmdlist.sh .. ok 13 ms ( 0.00 usr 0.00 sys + 3.33 cusr 2.78 csys = 6.11 CPU)
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
osx-gcc:
[11:58:03] t0001-generate-cmdlist.sh .. ok 78416 ms ( 0.02 usr 0.01 sys + 11.78 cusr 6.22 csys = 18.03 CPU)
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
vs-test:
[12:03:20] t0001-generate-cmdlist.sh .. ok 34 s ( 0.00 usr 0.03 sys + 12.42 cusr 19.55 csys = 32.00 CPU)
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
As above HEAD~2 and t0002* are testing the code in this commit (and
the line is the same), but HEAD~1 and t0001* are testing that dropped
change in [3].
1. https://lore.kernel.org/git/cover-v2-00.10-00000000000-20211022T193027Z-avarab@gmail.com/
2. https://lore.kernel.org/git/patch-v2-08.10-83318d6c0da-20211022T193027Z-avarab@gmail.com/
3. https://lore.kernel.org/git/patch-v2-10.10-e10a43756d1-20211022T193027Z-avarab@gmail.com/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-11-05 22:08:07 +08:00
|
|
|
cut -d' ' -f2- |
|
2021-11-05 22:08:02 +08:00
|
|
|
tr ' ' '\012' |
|
2021-11-05 22:08:03 +08:00
|
|
|
grep -v '^$' |
|
|
|
|
LC_ALL=C sort -u
|
2018-05-10 16:46:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
define_categories () {
|
|
|
|
echo
|
|
|
|
echo "/* Command categories */"
|
|
|
|
bit=0
|
2021-11-05 22:08:08 +08:00
|
|
|
echo "$1" |
|
2018-05-10 16:46:41 +08:00
|
|
|
while read cat
|
|
|
|
do
|
|
|
|
echo "#define CAT_$cat (1UL << $bit)"
|
|
|
|
bit=$(($bit+1))
|
|
|
|
done
|
|
|
|
test "$bit" -gt 32 && die "Urgh.. too many categories?"
|
|
|
|
}
|
|
|
|
|
2018-05-21 02:40:00 +08:00
|
|
|
define_category_names () {
|
|
|
|
echo
|
|
|
|
echo "/* Category names */"
|
|
|
|
echo "static const char *category_names[] = {"
|
|
|
|
bit=0
|
2021-11-05 22:08:08 +08:00
|
|
|
echo "$1" |
|
2018-05-21 02:40:00 +08:00
|
|
|
while read cat
|
|
|
|
do
|
|
|
|
echo " \"$cat\", /* (1UL << $bit) */"
|
|
|
|
bit=$(($bit+1))
|
|
|
|
done
|
|
|
|
echo " NULL"
|
|
|
|
echo "};"
|
|
|
|
}
|
|
|
|
|
2018-05-10 16:46:41 +08:00
|
|
|
print_command_list () {
|
|
|
|
echo "static struct cmdname_help command_list[] = {"
|
|
|
|
|
2021-11-05 22:08:08 +08:00
|
|
|
echo "$1" |
|
2018-05-10 16:46:41 +08:00
|
|
|
while read cmd rest
|
|
|
|
do
|
2021-11-05 22:08:06 +08:00
|
|
|
synopsis=
|
|
|
|
while read line
|
|
|
|
do
|
|
|
|
case "$line" in
|
|
|
|
"$cmd - "*)
|
|
|
|
synopsis=${line#$cmd - }
|
|
|
|
break
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
done <"Documentation/$cmd.txt"
|
|
|
|
|
|
|
|
printf '\t{ "%s", N_("%s"), 0' "$cmd" "$synopsis"
|
2021-11-05 22:08:05 +08:00
|
|
|
printf " | CAT_%s" $rest
|
2018-05-10 16:46:41 +08:00
|
|
|
echo " },"
|
|
|
|
done
|
|
|
|
echo "};"
|
|
|
|
}
|
|
|
|
|
generate-cmdlist.sh: replace "grep' invocation with a shell version
Replace the "grep" we run to exclude certain programs from the
generated output with a pure-shell loop that strips out the comments,
and sees if the "cmd" we're reading is on a list of excluded
programs. This uses a trick similar to test_have_prereq() in
test-lib-functions.sh.
On my *nix system this makes things quite a bit slower compared to
HEAD~:
o
'sh generate-cmdlist.sh.old command-list.txt' ran
1.56 ± 0.11 times faster than 'sh generate-cmdlist.sh command-list.txt'
18.00 ± 0.19 times faster than 'sh generate-cmdlist.sh.master command-list.txt'
But when I tried running generate-cmdlist.sh 100 times in CI I found
that it helped across the board even on OSX & Linux. I tried testing
it in CI with this ad-hoc few-liner:
for i in $(seq -w 0 11 | sort -nr)
do
git show HEAD~$i:generate-cmdlist.sh >generate-cmdlist-HEAD$i.sh &&
git add generate-cmdlist* &&
cp t/t0000-generate-cmdlist.sh t/t00$i-generate-cmdlist.sh || : &&
perl -pi -e "s/HEAD0/HEAD$i/g" t/t00$i-generate-cmdlist.sh &&
git add t/t00*.sh
done && git commit -m"generated it"
Here HEAD~02 and the t0002* file refers to this change, and HEAD~03
and t0003* file to the preceding commit, the relevant results were:
linux-gcc:
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
[12:05:30] t0003-generate-cmdlist.sh .. ok 32 ms ( 0.00 usr 0.00 sys + 2.66 cusr 1.81 csys = 4.47 CPU)
osx-gcc:
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
[11:58:16] t0003-generate-cmdlist.sh .. ok 92127 ms ( 0.02 usr 0.01 sys + 22.54 cusr 14.27 csys = 36.84 CPU)
vs-test:
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
[12:03:20] t0003-generate-cmdlist.sh .. ok 32 s ( 0.00 usr 0.02 sys + 13.25 cusr 26.10 csys = 39.37 CPU)
I.e. even on *nix running 100 of these in a loop was up to ~2x faster
in absolute runtime, I suspect it's due factors that are exacerbated
in the CI, e.g. much slower process startup due to some platform
limits, or a slower FS.
The "cut -d" change here is because we're not emitting the
40-character aligned output anymore, i.e. we'll get the output from
command_list() now, not an as-is line from command-list.txt.
This also makes the parsing more reliable, as we could tweak the
whitespace alignment without breaking this parser. Let's reword a
now-inaccurate comment in "command-list.txt" describing that previous
alignment limitation. We'll still need the "### command-list [...]"
line due to the "Documentation/cmd-list.perl" logic added in
11c6659d85d (command-list: prepare machinery for upcoming "common
groups" section, 2015-05-21).
There was a proposed change subsequent to this one[3] which continued
moving more logic into the "command_list() function, i.e. replaced the
"cut | tr | grep" chain in "category_list()" with an argument to
"command_list()".
That change might have had a bit of an effect, but not as much as the
preceding commit, so I decided to drop it. The relevant performance
numbers from it were:
linux-gcc:
[12:05:33] t0001-generate-cmdlist.sh .. ok 13 ms ( 0.00 usr 0.00 sys + 3.33 cusr 2.78 csys = 6.11 CPU)
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
osx-gcc:
[11:58:03] t0001-generate-cmdlist.sh .. ok 78416 ms ( 0.02 usr 0.01 sys + 11.78 cusr 6.22 csys = 18.03 CPU)
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
vs-test:
[12:03:20] t0001-generate-cmdlist.sh .. ok 34 s ( 0.00 usr 0.03 sys + 12.42 cusr 19.55 csys = 32.00 CPU)
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
As above HEAD~2 and t0002* are testing the code in this commit (and
the line is the same), but HEAD~1 and t0001* are testing that dropped
change in [3].
1. https://lore.kernel.org/git/cover-v2-00.10-00000000000-20211022T193027Z-avarab@gmail.com/
2. https://lore.kernel.org/git/patch-v2-08.10-83318d6c0da-20211022T193027Z-avarab@gmail.com/
3. https://lore.kernel.org/git/patch-v2-10.10-e10a43756d1-20211022T193027Z-avarab@gmail.com/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-11-05 22:08:07 +08:00
|
|
|
exclude_programs=:
|
2019-04-18 21:16:40 +08:00
|
|
|
while test "--exclude-program" = "$1"
|
|
|
|
do
|
|
|
|
shift
|
generate-cmdlist.sh: replace "grep' invocation with a shell version
Replace the "grep" we run to exclude certain programs from the
generated output with a pure-shell loop that strips out the comments,
and sees if the "cmd" we're reading is on a list of excluded
programs. This uses a trick similar to test_have_prereq() in
test-lib-functions.sh.
On my *nix system this makes things quite a bit slower compared to
HEAD~:
o
'sh generate-cmdlist.sh.old command-list.txt' ran
1.56 ± 0.11 times faster than 'sh generate-cmdlist.sh command-list.txt'
18.00 ± 0.19 times faster than 'sh generate-cmdlist.sh.master command-list.txt'
But when I tried running generate-cmdlist.sh 100 times in CI I found
that it helped across the board even on OSX & Linux. I tried testing
it in CI with this ad-hoc few-liner:
for i in $(seq -w 0 11 | sort -nr)
do
git show HEAD~$i:generate-cmdlist.sh >generate-cmdlist-HEAD$i.sh &&
git add generate-cmdlist* &&
cp t/t0000-generate-cmdlist.sh t/t00$i-generate-cmdlist.sh || : &&
perl -pi -e "s/HEAD0/HEAD$i/g" t/t00$i-generate-cmdlist.sh &&
git add t/t00*.sh
done && git commit -m"generated it"
Here HEAD~02 and the t0002* file refers to this change, and HEAD~03
and t0003* file to the preceding commit, the relevant results were:
linux-gcc:
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
[12:05:30] t0003-generate-cmdlist.sh .. ok 32 ms ( 0.00 usr 0.00 sys + 2.66 cusr 1.81 csys = 4.47 CPU)
osx-gcc:
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
[11:58:16] t0003-generate-cmdlist.sh .. ok 92127 ms ( 0.02 usr 0.01 sys + 22.54 cusr 14.27 csys = 36.84 CPU)
vs-test:
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
[12:03:20] t0003-generate-cmdlist.sh .. ok 32 s ( 0.00 usr 0.02 sys + 13.25 cusr 26.10 csys = 39.37 CPU)
I.e. even on *nix running 100 of these in a loop was up to ~2x faster
in absolute runtime, I suspect it's due factors that are exacerbated
in the CI, e.g. much slower process startup due to some platform
limits, or a slower FS.
The "cut -d" change here is because we're not emitting the
40-character aligned output anymore, i.e. we'll get the output from
command_list() now, not an as-is line from command-list.txt.
This also makes the parsing more reliable, as we could tweak the
whitespace alignment without breaking this parser. Let's reword a
now-inaccurate comment in "command-list.txt" describing that previous
alignment limitation. We'll still need the "### command-list [...]"
line due to the "Documentation/cmd-list.perl" logic added in
11c6659d85d (command-list: prepare machinery for upcoming "common
groups" section, 2015-05-21).
There was a proposed change subsequent to this one[3] which continued
moving more logic into the "command_list() function, i.e. replaced the
"cut | tr | grep" chain in "category_list()" with an argument to
"command_list()".
That change might have had a bit of an effect, but not as much as the
preceding commit, so I decided to drop it. The relevant performance
numbers from it were:
linux-gcc:
[12:05:33] t0001-generate-cmdlist.sh .. ok 13 ms ( 0.00 usr 0.00 sys + 3.33 cusr 2.78 csys = 6.11 CPU)
[12:05:33] t0002-generate-cmdlist.sh .. ok 14 ms ( 0.00 usr 0.00 sys + 3.64 cusr 3.09 csys = 6.73 CPU)
osx-gcc:
[11:58:03] t0001-generate-cmdlist.sh .. ok 78416 ms ( 0.02 usr 0.01 sys + 11.78 cusr 6.22 csys = 18.03 CPU)
[11:58:04] t0002-generate-cmdlist.sh .. ok 80081 ms ( 0.02 usr 0.02 sys + 17.80 cusr 10.07 csys = 27.91 CPU)
vs-test:
[12:03:20] t0001-generate-cmdlist.sh .. ok 34 s ( 0.00 usr 0.03 sys + 12.42 cusr 19.55 csys = 32.00 CPU)
[12:03:14] t0002-generate-cmdlist.sh .. ok 30 s ( 0.02 usr 0.00 sys + 13.14 cusr 26.19 csys = 39.35 CPU)
As above HEAD~2 and t0002* are testing the code in this commit (and
the line is the same), but HEAD~1 and t0001* are testing that dropped
change in [3].
1. https://lore.kernel.org/git/cover-v2-00.10-00000000000-20211022T193027Z-avarab@gmail.com/
2. https://lore.kernel.org/git/patch-v2-08.10-83318d6c0da-20211022T193027Z-avarab@gmail.com/
3. https://lore.kernel.org/git/patch-v2-10.10-e10a43756d1-20211022T193027Z-avarab@gmail.com/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-11-05 22:08:07 +08:00
|
|
|
exclude_programs="$exclude_programs$1:"
|
2019-04-18 21:16:40 +08:00
|
|
|
shift
|
|
|
|
done
|
|
|
|
|
2021-11-05 22:08:08 +08:00
|
|
|
commands="$(command_list "$1")"
|
|
|
|
categories="$(category_list "$commands")"
|
|
|
|
|
2016-07-02 08:32:00 +08:00
|
|
|
echo "/* Automatically generated by generate-cmdlist.sh */
|
generate-cmdlist: re-implement as shell script
527ec39 (generate-cmdlist: parse common group commands, 2015-05-21)
replaced generate-cmdlist.sh with a more functional Perl version,
generate-cmdlist.perl. The Perl version gleans named tags from a new
"common groups" section in command-list.txt and recognizes those
tags in "command list" section entries in place of the old 'common'
tag. This allows git-help to, not only recognize, but also group
common commands.
Although the tests require Perl, 527ec39 creates an unconditional
dependence upon Perl in the build system itself, which can not be
overridden with NO_PERL. Such a dependency may be undesirable; for
instance, the 'git-lite' package in the FreeBSD ports tree is
intended as a minimal Git installation (which may, for example, be
useful on servers needing only local clone and update capability),
which, historically, has not depended upon Perl[1].
Therefore, revive generate-cmdlist.sh and extend it to recognize
"common groups" and its named tags. Retire generate-cmdlist.perl.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/275905/focus=276132
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-24 05:31:09 +08:00
|
|
|
struct cmdname_help {
|
2018-05-10 16:46:41 +08:00
|
|
|
const char *name;
|
|
|
|
const char *help;
|
2018-05-10 16:46:42 +08:00
|
|
|
uint32_t category;
|
generate-cmdlist: re-implement as shell script
527ec39 (generate-cmdlist: parse common group commands, 2015-05-21)
replaced generate-cmdlist.sh with a more functional Perl version,
generate-cmdlist.perl. The Perl version gleans named tags from a new
"common groups" section in command-list.txt and recognizes those
tags in "command list" section entries in place of the old 'common'
tag. This allows git-help to, not only recognize, but also group
common commands.
Although the tests require Perl, 527ec39 creates an unconditional
dependence upon Perl in the build system itself, which can not be
overridden with NO_PERL. Such a dependency may be undesirable; for
instance, the 'git-lite' package in the FreeBSD ports tree is
intended as a minimal Git installation (which may, for example, be
useful on servers needing only local clone and update capability),
which, historically, has not depended upon Perl[1].
Therefore, revive generate-cmdlist.sh and extend it to recognize
"common groups" and its named tags. Retire generate-cmdlist.perl.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/275905/focus=276132
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-24 05:31:09 +08:00
|
|
|
};
|
2018-05-10 16:46:41 +08:00
|
|
|
"
|
2021-11-05 22:08:08 +08:00
|
|
|
define_categories "$categories"
|
2018-05-10 16:46:43 +08:00
|
|
|
echo
|
2021-11-05 22:08:08 +08:00
|
|
|
define_category_names "$categories"
|
2018-05-21 02:40:00 +08:00
|
|
|
echo
|
2021-11-05 22:08:08 +08:00
|
|
|
print_command_list "$commands"
|