mirrors/git
0
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-11-23 18:05:29 +08:00
Code Issues Packages Projects Releases Wiki Activity
abf8df869c
git/http.h

190 lines
5.2 KiB
C
Raw Normal View History

Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
#ifndef HTTP_H
#define HTTP_H
#include "cache.h"
#include <curl/curl.h>
#include <curl/easy.h>
Use strbuf in http code Also, replace whitespaces with tabs in some places Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-10 03:30:59 +08:00
#include "strbuf.h"
Set proxy override with http_init() In transport.c, proxy setting (the one from the remote conf) was set through curl_easy_setopt() call, while http.c already does the same with the http.proxy setting. We now just use this infrastructure instead, and make http_init() now take the struct remote as argument so that it can take the http_proxy setting from there, and any other property that would be added later. At the same time, we make get_http_walker() take a struct remote argument too, and pass it to http_init(), which makes remote defined proxy be used for more than get_refs_via_curl(). We leave out http-fetch and http-push, which don't use remotes for the moment, purposefully. Signed-off-by: Mike Hommey <mh@glandium.org> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-28 04:35:50 +08:00
#include "remote.h"
shift end_url_with_slash() from http.[ch] to url.[ch] This allows non-http/curl users to access it too (eg. http-backend.c). Update include headers in end_url_with_slash() users too. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-25 16:21:04 +08:00
#include "url.h"
Use strbuf in http code Also, replace whitespaces with tabs in some places Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-10 03:30:59 +08:00
Clarify that http-push being temporarily disabled with older cURL Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-22 09:34:43 +08:00
/*
* We detect based on the cURL version if multi-transfer is
* usable in this implementation and define this symbol accordingly.
* This is not something Makefile should set nor users should pass
* via CFLAGS.
*/
#undef USE_CURL_MULTI
http-fetch: Disable use of curl multi support for libcurl < 7.16. curl_multi_remove_handle() is broken in libcurl < 7.16, in that it doesn't correctly update the active handles count when a request is aborted. This causes the transfer to hang forever waiting for the handle count to become less than the number of active requests. Signed-off-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-02 20:53:23 +08:00
#if LIBCURL_VERSION_NUM >= 0x071000
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
#define USE_CURL_MULTI
#define DEFAULT_MAX_REQUESTS 5
#endif
#if LIBCURL_VERSION_NUM < 0x070704
Standardize do { ... } while (0) style Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-13 06:11:15 +08:00
#define curl_global_cleanup() do { /* nothing */ } while (0)
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
#endif
#if LIBCURL_VERSION_NUM < 0x070800
Standardize do { ... } while (0) style Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-13 06:11:15 +08:00
#define curl_global_init(a) do { /* nothing */ } while (0)
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
#endif
Work around http-fetch built with cURL 7.16.0 It appears that curl_easy_duphandle() from libcurl 7.16.0 returns a curl session handle which fails GOOD_MULTI_HANDLE() check in curl_multi_add_handle(). This causes fetch_ref() to fail because start_active_slot() cannot start the request. For now, check for 7.16.0 to work this issue around. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-28 05:59:26 +08:00
#if (LIBCURL_VERSION_NUM < 0x070c04) || (LIBCURL_VERSION_NUM == 0x071000)
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
#define NO_CURL_EASY_DUPHANDLE
#endif
Patch for http-fetch.c and older curl releases Older curl releases do not define CURLE_HTTP_RETURNED_ERROR, they use CURLE_HTTP_NOT_FOUND instead. Newer curl releases keep the CURLE_HTTP_NOT_FOUND definition but using a -DCURL_NO_OLDIES preprocessor flag the old name will not be present in the 'curl.h' header. This patch makes our code written for newer releases of the curl library but allow compiling against an older curl (older than 0x070a03) by defining the missing CURLE_HTTP_RETURNED_ERROR as a synonym for CURLE_HTTP_NOT_FOUND. Signed-off-by: Art Haas <ahaas@airmail.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-19 20:20:19 +08:00
#if LIBCURL_VERSION_NUM < 0x070a03
#define CURLE_HTTP_RETURNED_ERROR CURLE_HTTP_NOT_FOUND
#endif
Allow curl to rewind the read buffers When using multi-pass authentication methods, the curl library may need to rewind the read buffers (depending on how much already has been fed to the server) used for providing data to HTTP PUT, POST or PROPFIND, and in order to allow the library to do so, we need to tell it how by providing either an ioctl callback or a seek callback. This patch adds an ioctl callback, which should be usable on older curl versions (since 7.12.3) than the seek callback (introduced in curl 7.18.0). Some HTTP servers (such as Apache) give an 401 error reply immediately after receiving the headers (so no data has been read from the read buffers, and thus no rewinding is needed), but other servers (such as Lighttpd) only replies after the whole request has been sent and all data has been read from the read buffers, making rewinding necessary. Signed-off-by: Martin Storsjo <martin@martin.st> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-02 00:48:24 +08:00
#if LIBCURL_VERSION_NUM < 0x070c03
#define NO_CURL_IOCTL
#endif
standardize brace placement in struct definitions In a struct definitions, unlike functions, the prevailing style is for the opening brace to go on the same line as the struct name, like so: struct foo { int bar; char *baz; }; Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many matches as 'struct [a-z_]*$'. Linus sayeth: Heretic people all over the world have claimed that this inconsistency is ... well ... inconsistent, but all right-thinking people know that (a) K&R are _right_ and (b) K&R are right. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-16 15:08:34 +08:00
struct slot_results {
Fix HTTP request result processing after slot reuse Add a way to store the results of an HTTP request when a slot finishes so the results can be processed after the slot has been reused. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-01 03:06:55 +08:00
CURLcode curl_result;
long http_code;
};
standardize brace placement in struct definitions In a struct definitions, unlike functions, the prevailing style is for the opening brace to go on the same line as the struct name, like so: struct foo { int bar; char *baz; }; Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many matches as 'struct [a-z_]*$'. Linus sayeth: Heretic people all over the world have claimed that this inconsistency is ... well ... inconsistent, but all right-thinking people know that (a) K&R are _right_ and (b) K&R are right. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-16 15:08:34 +08:00
struct active_request_slot {
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
CURL *curl;
int in_use;
CURLcode curl_result;
long http_code;
HTTP slot reuse fixes Incorporate into http-push a fix related to accessing slot results after the slot was reused, and fix a case in run_active_slot where a finished slot wasn't detected if the slot was reused. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-11 12:18:01 +08:00
int *finished;
Fix HTTP request result processing after slot reuse Add a way to store the results of an HTTP request when a slot finishes so the results can be processed after the slot has been reused. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-01 03:06:55 +08:00
struct slot_results *results;
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
void *callback_data;
void (*callback_func)(void *data);
struct active_request_slot *next;
};
standardize brace placement in struct definitions In a struct definitions, unlike functions, the prevailing style is for the opening brace to go on the same line as the struct name, like so: struct foo { int bar; char *baz; }; Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many matches as 'struct [a-z_]*$'. Linus sayeth: Heretic people all over the world have claimed that this inconsistency is ... well ... inconsistent, but all right-thinking people know that (a) K&R are _right_ and (b) K&R are right. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-16 15:08:34 +08:00
struct buffer {
Use strbuf in http code Also, replace whitespaces with tabs in some places Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-10 03:30:59 +08:00
struct strbuf buf;
size_t posn;
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
};
/* Curl request read/write callbacks */
http: make curl callbacks match contracts from curl header Yes, these don't match perfectly with the void* first parameter of the fread/fwrite in the standard library, but they do match the curl expected method signature. This is needed when a refactor passes a curl_write_callback around, which would otherwise give incorrect parameter warnings. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-03 23:47:27 +08:00
extern size_t fread_buffer(char *ptr, size_t eltsize, size_t nmemb, void *strbuf);
extern size_t fwrite_buffer(char *ptr, size_t eltsize, size_t nmemb, void *strbuf);
extern size_t fwrite_null(char *ptr, size_t eltsize, size_t nmemb, void *strbuf);
Allow curl to rewind the read buffers When using multi-pass authentication methods, the curl library may need to rewind the read buffers (depending on how much already has been fed to the server) used for providing data to HTTP PUT, POST or PROPFIND, and in order to allow the library to do so, we need to tell it how by providing either an ioctl callback or a seek callback. This patch adds an ioctl callback, which should be usable on older curl versions (since 7.12.3) than the seek callback (introduced in curl 7.18.0). Some HTTP servers (such as Apache) give an 401 error reply immediately after receiving the headers (so no data has been read from the read buffers, and thus no rewinding is needed), but other servers (such as Lighttpd) only replies after the whole request has been sent and all data has been read from the read buffers, making rewinding necessary. Signed-off-by: Martin Storsjo <martin@martin.st> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-02 00:48:24 +08:00
#ifndef NO_CURL_IOCTL
extern curlioerr ioctl_buffer(CURL *handle, int cmd, void *clientp);
#endif
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
/* Slot lifecycle functions */
extern struct active_request_slot *get_active_slot(void);
extern int start_active_slot(struct active_request_slot *slot);
extern void run_active_slot(struct active_request_slot *slot);
Smart push over HTTP: client side The git-remote-curl backend detects if the remote server supports the git-receive-pack service, and if so, runs git-send-pack in a pipe to dump the command and pack data as a single POST request. The advertisements from the server that were obtained during the discovery are passed into git-send-pack before the POST request starts. This permits git-send-pack to operate largely unmodified. For smaller packs (those under 1 MiB) a HTTP/1.0 POST with a Content-Length is used, permitting interaction with any server. The 1 MiB limit is arbitrary, but is sufficent to fit most deltas created by human authors against text sources with the occasional small binary file (e.g. few KiB icon image). The configuration option http.postBuffer can be used to increase (or shink) this buffer if the default is not sufficient. For larger packs which cannot be spooled entirely into the helper's memory space (due to http.postBuffer being too small), the POST request requires HTTP/1.1 and sets "Transfer-Encoding: chunked". This permits the client to upload an unknown amount of data in one HTTP transaction without needing to pregenerate the entire pack file locally. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> CC: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 08:47:41 +08:00
extern void finish_active_slot(struct active_request_slot *slot);
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
extern void finish_all_active_slots(void);
http: fix segfault in handle_curl_result When we create an http active_request_slot, we can set its "results" pointer back to local storage. The http code will fill in the details of how the request went, and we can access those details even after the slot has been cleaned up. Commit 8809703 (http: factor out http error code handling) switched us from accessing our local results struct directly to accessing it via the "results" pointer of the slot. That means we're accessing the slot after it has been marked as finished, defeating the whole purpose of keeping the results storage separate. Most of the time this doesn't matter, as finishing the slot does not actually clean up the pointer. However, when using curl's multi interface with the dumb-http revision walker, we might actually start a new request before handing control back to the original caller. In that case, we may reuse the slot, zeroing its results pointer, and leading the original caller to segfault while looking for its results inside the slot. Instead, we need to pass a pointer to our local results storage to the handle_curl_result function, rather than relying on the pointer in the slot struct. This matches what the original code did before the refactoring (which did not use a separate function, and therefore just accessed the results struct directly). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-12 14:22:49 +08:00
extern int handle_curl_result(struct active_request_slot *slot,
struct slot_results *results);
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
#ifdef USE_CURL_MULTI
extern void fill_active_slots(void);
Make function to refill http queue a callback This eliminates the last function provided by the code using http.h as a global symbol, so it should be possible to have multiple programs using http.h in the same executable, and it also adds an argument to that callback, so that info can be passed into the callback without being global. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-11 11:02:34 +08:00
extern void add_fill_function(void *data, int (*fill)(void *));
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
extern void step_active_slots(void);
#endif
http-push: enable "proactive auth" Before commit 986bbc08, git was proactive about asking for http passwords. It assumed that if you had a username in your URL, you would also want a password, and asked for it before making any http requests. However, this could interfere with the use of .netrc (see 986bbc08 for details). And it was also unnecessary, since the http fetching code had learned to recognize an HTTP 401 and prompt the user then. Furthermore, the proactive prompt could interfere with the usage of .netrc (see 986bbc08 for details). Unfortunately, the http push-over-DAV code never learned to recognize HTTP 401, and so was broken by this change. This patch does a quick fix of re-enabling the "proactive auth" strategy only for http-push, leaving the dumb http fetch and smart-http as-is. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-14 08:11:56 +08:00
extern void http_init(struct remote *remote, const char *url,
int proactive_auth);
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
extern void http_cleanup(void);
extern int active_requests;
http*: move common variables and macros to http.[ch] Move RANGE_HEADER_SIZE to http.h. Create no_pragma_header, the curl header list containing the header "Pragma:" in http.[ch]. It is allocated in http_init, and freed in http_cleanup. This replaces the no_pragma_header in http-push.c, and the no_pragma_header member in walker_data in http-walker.c. Create http_is_verbose. It is to be used by methods in http.c, and is modified at the entry points of http.c's users, namely http-push.c (when parsing options) and http-walker.c (in get_http_walker). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:43:41 +08:00
extern int http_is_verbose;
Smart push over HTTP: client side The git-remote-curl backend detects if the remote server supports the git-receive-pack service, and if so, runs git-send-pack in a pipe to dump the command and pack data as a single POST request. The advertisements from the server that were obtained during the discovery are passed into git-send-pack before the POST request starts. This permits git-send-pack to operate largely unmodified. For smaller packs (those under 1 MiB) a HTTP/1.0 POST with a Content-Length is used, permitting interaction with any server. The 1 MiB limit is arbitrary, but is sufficent to fit most deltas created by human authors against text sources with the occasional small binary file (e.g. few KiB icon image). The configuration option http.postBuffer can be used to increase (or shink) this buffer if the default is not sufficient. For larger packs which cannot be spooled entirely into the helper's memory space (due to http.postBuffer being too small), the POST request requires HTTP/1.1 and sets "Transfer-Encoding: chunked". This permits the client to upload an unknown amount of data in one HTTP transaction without needing to pregenerate the entire pack file locally. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> CC: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 08:47:41 +08:00
extern size_t http_post_buffer;
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
extern char curl_errorstr[CURL_ERROR_SIZE];
Avoid redundant declaration of missing_target() Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-11 05:36:09 +08:00
static inline int missing__target(int code, int result)
{
return /* file:// URL -- do we ever use one??? */
(result == CURLE_FILE_COULDNT_READ_FILE) ||
/* http:// and https:// URL */
(code == 404 && result == CURLE_HTTP_RETURNED_ERROR) ||
/* ftp:// URL */
(code == 550 && result == CURLE_FTP_COULDNT_RETR_FILE)
;
}
#define missing_target(a) missing__target((a)->http_code, (a)->curl_result)
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
/* Helpers for modifying and creating URLs */
extern void append_remote_object_url(struct strbuf *buf, const char *url,
const char *hex,
int only_two_digit_prefix);
extern char *get_remote_object_url(const char *url, const char *hex,
int only_two_digit_prefix);
http.c: new functions for the http API The new functions added are: - http_request() (internal function) - http_get_strbuf() - http_get_file() - http_error() http_get_strbuf and http_get_file allow respectively to retrieve contents of an URL to a strbuf or an opened file handle. http_error prints out an error message containing the URL and the curl error (in curl_errorstr). Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:43:53 +08:00
/* Options for http_request_*() */
#define HTTP_NO_CACHE 1
/* Return values for http_request_*() */
#define HTTP_OK 0
#define HTTP_MISSING_TARGET 1
#define HTTP_ERROR 2
#define HTTP_START_FAILED 3
Prompt for a username when an HTTP request 401s When an HTTP request returns a 401, Git will currently fail with a confusing message saying that it got a 401, which is not very descriptive. Currently if a user wants to use Git over HTTP, they have to use one URL with the username in the URL (e.g. "http://user@host.com/repo.git") for write access and another without the username for unauthenticated read access (unless they want to be prompted for the password each time). However, since the HTTP servers will return a 401 if an action requires authentication, we can prompt for username and password if we see this, allowing us to use a single URL for both purposes. This patch changes http_request to prompt for the username and password, then return HTTP_REAUTH so http_get_strbuf can try again. If it gets a 401 even when a user/pass is supplied, http_request will now return HTTP_NOAUTH which remote_curl can then use to display a more intelligent error message that is less confusing. Signed-off-by: Scott Chacon <schacon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-02 06:14:35 +08:00
#define HTTP_REAUTH 4
#define HTTP_NOAUTH 5
http.c: new functions for the http API The new functions added are: - http_request() (internal function) - http_get_strbuf() - http_get_file() - http_error() http_get_strbuf and http_get_file allow respectively to retrieve contents of an URL to a strbuf or an opened file handle. http_error prints out an error message containing the URL and the curl error (in curl_errorstr). Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:43:53 +08:00
/*
correct spelling: an URL -> a URL Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-28 16:41:54 +08:00
* Requests a URL and stores the result in a strbuf.
http.c: new functions for the http API The new functions added are: - http_request() (internal function) - http_get_strbuf() - http_get_file() - http_error() http_get_strbuf and http_get_file allow respectively to retrieve contents of an URL to a strbuf or an opened file handle. http_error prints out an error message containing the URL and the curl error (in curl_errorstr). Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:43:53 +08:00
*
* If the result pointer is NULL, a HTTP HEAD request is made instead of GET.
*/
int http_get_strbuf(const char *url, struct strbuf *result, int options);
/*
* Prints an error message using error() containing url and curl_errorstr,
* and returns ret.
*/
int http_error(const char *url, int ret);
Make walker.fetch_ref() take a struct ref. This simplifies a few things, makes a few things slightly more complicated, but, more importantly, allows that, when struct ref can represent a symref, http_fetch_ref() can return one. Incidentally makes the string that http_fetch_ref() gets include "refs/" (if appropriate), because that's how the name field of struct ref works. As far as I can tell, the usage in walker:interpret_target() wouldn't have worked previously, if it ever would have been used, which it wouldn't (since the fetch process uses the hash instead of the name of the ref there). Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-27 03:53:09 +08:00
extern int http_fetch_ref(const char *base, struct ref *ref);
Move fetch_ref from http-push.c and http-walker.c to http.c Make the necessary changes to be ok with their difference, and rename the function http_fetch_ref. Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-11 07:08:25 +08:00
http*: add http_get_info_packs http-push.c and http-walker.c no longer have to use fetch_index or setup_index; they simply need to use http_get_info_packs, a new http method, in their fetch_indices implementations. Move fetch_index() and rename to fetch_pack_index() in http.c; this method is not meant to be used outside of http.c. It invokes end_url_with_slash with base_url; apart from that change, the code is identical. Move setup_index() and rename to fetch_and_setup_pack_index() in http.c; this method is not meant to be used outside of http.c. Do not immediately set ret to 0 in http-walker.c::fetch_indices(); instead do it in the HTTP_MISSING_TARGET case, to make it clear that the HTTP_OK and HTTP_MISSING_TARGET cases both return 0. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:43:59 +08:00
/* Helpers for fetching packs */
extern int http_get_info_packs(const char *base_url,
struct packed_git **packs_head);
standardize brace placement in struct definitions In a struct definitions, unlike functions, the prevailing style is for the opening brace to go on the same line as the struct name, like so: struct foo { int bar; char *baz; }; Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many matches as 'struct [a-z_]*$'. Linus sayeth: Heretic people all over the world have claimed that this inconsistency is ... well ... inconsistent, but all right-thinking people know that (a) K&R are _right_ and (b) K&R are right. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-16 15:08:34 +08:00
struct http_pack_request {
http*: add helper methods for fetching packs The code handling the fetching of packs in http-push.c and http-walker.c have been refactored into new methods and a new struct (http_pack_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_pack_request - finish_http_pack_request - release_http_pack_request and the new struct is http_pack_request. Add a function, new_http_pack_request(), that deals with the details of coming up with the filename to store the retrieved packfile, resuming a previously aborted request, and making a new curl request. Update http-push.c::start_fetch_packed() and http-walker.c::fetch_pack() to use this. Add a function, finish_http_pack_request(), that deals with renaming the pack, advancing the pack list, and installing the pack. Update http-push.c::finish_request() and http-walker.c::fetch_pack to use this. Update release_request() in http-push.c and http-walker.c to invoke release_http_pack_request() to clean up pack request helper data. The local_stream member of the transfer_request struct in http-push.c has been removed, as the packfile pointer will be managed in the struct http_pack_request. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:01 +08:00
char *url;
struct packed_git *target;
struct packed_git **lst;
FILE *packfile;
char tmpfile[PATH_MAX];
struct curl_slist *range_header;
struct active_request_slot *slot;
};
extern struct http_pack_request *new_http_pack_request(
struct packed_git *target, const char *base_url);
extern int finish_http_pack_request(struct http_pack_request *preq);
extern void release_http_pack_request(struct http_pack_request *preq);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
/* Helpers for fetching object */
standardize brace placement in struct definitions In a struct definitions, unlike functions, the prevailing style is for the opening brace to go on the same line as the struct name, like so: struct foo { int bar; char *baz; }; Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many matches as 'struct [a-z_]*$'. Linus sayeth: Heretic people all over the world have claimed that this inconsistency is ... well ... inconsistent, but all right-thinking people know that (a) K&R are _right_ and (b) K&R are right. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-16 15:08:34 +08:00
struct http_object_request {
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
char *url;
char tmpfile[PATH_MAX];
int localfile;
CURLcode curl_result;
char errorstr[CURL_ERROR_SIZE];
long http_code;
unsigned char sha1[20];
unsigned char real_sha1[20];
git_SHA_CTX c;
zlib: zlib can only process 4GB at a time The size of objects we read from the repository and data we try to put into the repository are represented in "unsigned long", so that on larger architectures we can handle objects that weigh more than 4GB. But the interface defined in zlib.h to communicate with inflate/deflate limits avail_in (how many bytes of input are we calling zlib with) and avail_out (how many bytes of output from zlib are we ready to accept) fields effectively to 4GB by defining their type to be uInt. In many places in our code, we allocate a large buffer (e.g. mmap'ing a large loose object file) and tell zlib its size by assigning the size to avail_in field of the stream, but that will truncate the high octets of the real size. The worst part of this story is that we often pass around z_stream (the state object used by zlib) to keep track of the number of used bytes in input/output buffer by inspecting these two fields, which practically limits our callchain to the same 4GB limit. Wrap z_stream in another structure git_zstream that can express avail_in and avail_out in unsigned long. For now, just die() when the caller gives a size that cannot be given to a single zlib call. In later patches in the series, we would make git_inflate() and git_deflate() internally loop to give callers an illusion that our "improved" version of zlib interface can operate on a buffer larger than 4GB in one go. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-11 02:52:15 +08:00
git_zstream stream;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
int zret;
int rename;
struct active_request_slot *slot;
};
extern struct http_object_request *new_http_object_request(
const char *base_url, unsigned char *sha1);
extern void process_http_object_request(struct http_object_request *freq);
extern int finish_http_object_request(struct http_object_request *freq);
extern void abort_http_object_request(struct http_object_request *freq);
extern void release_http_object_request(struct http_object_request *freq);
Isolate shared HTTP request functionality Move shared HTTP request functionality out of http-fetch and http-push, and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with one fwrite_buffer function that does dynamic buffering. Use slot callbacks to process responses to fetch object transfer requests and push transfer requests, and put all of http-push into an #ifdef check for curl multi support. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-19 03:02:58 +08:00
#endif /* HTTP_H */
Reference in New Issue Copy Permalink