git/builtin/repack.c

573 lines
16 KiB
C
Raw Normal View History

#include "builtin.h"
#include "cache.h"
#include "config.h"
#include "dir.h"
#include "parse-options.h"
#include "run-command.h"
#include "sigchain.h"
#include "strbuf.h"
#include "string-list.h"
#include "argv-array.h"
#include "midx.h"
#include "packfile.h"
#include "object-store.h"
static int delta_base_offset = 1;
repack: add `repack.packKeptObjects` config var The git-repack command always passes `--honor-pack-keep` to pack-objects. This has traditionally been a good thing, as we do not want to duplicate those objects in a new pack, and we are not going to delete the old pack. However, when bitmaps are in use, it is important for a full repack to include all reachable objects, even if they may be duplicated in a .keep pack. Otherwise, we cannot generate the bitmaps, as the on-disk format requires the set of objects in the pack to be fully closed. Even if the repository does not generally have .keep files, a simultaneous push could cause a race condition in which a .keep file exists at the moment of a repack. The repack may try to include those objects in one of two situations: 1. The pushed .keep pack contains objects that were already in the repository (e.g., blobs due to a revert of an old commit). 2. Receive-pack updates the refs, making the objects reachable, but before it removes the .keep file, the repack runs. In either case, we may prefer to duplicate some objects in the new, full pack, and let the next repack (after the .keep file is cleaned up) take care of removing them. This patch introduces both a command-line and config option to disable the `--honor-pack-keep` option. By default, it is triggered when pack.writeBitmaps (or `--write-bitmap-index` is turned on), but specifying it explicitly can override the behavior (e.g., in cases where you prefer .keep files to bitmaps, but only when they are present). Note that this option just disables the pack-objects behavior. We still leave packs with a .keep in place, as we do not necessarily know that we have duplicated all of their objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-04 04:04:20 +08:00
static int pack_kept_objects = -1;
static int write_bitmaps = -1;
static int use_delta_islands;
static char *packdir, *packtmp;
static const char *const git_repack_usage[] = {
N_("git repack [<options>]"),
NULL
};
static const char incremental_bitmap_conflict_error[] = N_(
"Incremental repacks are incompatible with bitmap indexes. Use\n"
"--no-write-bitmap-index or disable the pack.writebitmaps configuration."
);
static int repack_config(const char *var, const char *value, void *cb)
{
if (!strcmp(var, "repack.usedeltabaseoffset")) {
delta_base_offset = git_config_bool(var, value);
return 0;
}
repack: add `repack.packKeptObjects` config var The git-repack command always passes `--honor-pack-keep` to pack-objects. This has traditionally been a good thing, as we do not want to duplicate those objects in a new pack, and we are not going to delete the old pack. However, when bitmaps are in use, it is important for a full repack to include all reachable objects, even if they may be duplicated in a .keep pack. Otherwise, we cannot generate the bitmaps, as the on-disk format requires the set of objects in the pack to be fully closed. Even if the repository does not generally have .keep files, a simultaneous push could cause a race condition in which a .keep file exists at the moment of a repack. The repack may try to include those objects in one of two situations: 1. The pushed .keep pack contains objects that were already in the repository (e.g., blobs due to a revert of an old commit). 2. Receive-pack updates the refs, making the objects reachable, but before it removes the .keep file, the repack runs. In either case, we may prefer to duplicate some objects in the new, full pack, and let the next repack (after the .keep file is cleaned up) take care of removing them. This patch introduces both a command-line and config option to disable the `--honor-pack-keep` option. By default, it is triggered when pack.writeBitmaps (or `--write-bitmap-index` is turned on), but specifying it explicitly can override the behavior (e.g., in cases where you prefer .keep files to bitmaps, but only when they are present). Note that this option just disables the pack-objects behavior. We still leave packs with a .keep in place, as we do not necessarily know that we have duplicated all of their objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-04 04:04:20 +08:00
if (!strcmp(var, "repack.packkeptobjects")) {
pack_kept_objects = git_config_bool(var, value);
return 0;
}
if (!strcmp(var, "repack.writebitmaps") ||
!strcmp(var, "pack.writebitmaps")) {
write_bitmaps = git_config_bool(var, value);
return 0;
}
if (!strcmp(var, "repack.usedeltaislands")) {
use_delta_islands = git_config_bool(var, value);
return 0;
}
return git_default_config(var, value, cb);
}
/*
* Remove temporary $GIT_OBJECT_DIRECTORY/pack/.tmp-$$-pack-* files.
*/
static void remove_temporary_files(void)
{
struct strbuf buf = STRBUF_INIT;
size_t dirlen, prefixlen;
DIR *dir;
struct dirent *e;
dir = opendir(packdir);
if (!dir)
return;
/* Point at the slash at the end of ".../objects/pack/" */
dirlen = strlen(packdir) + 1;
strbuf_addstr(&buf, packtmp);
/* Hold the length of ".tmp-%d-pack-" */
prefixlen = buf.len - dirlen;
while ((e = readdir(dir))) {
if (strncmp(e->d_name, buf.buf + dirlen, prefixlen))
continue;
strbuf_setlen(&buf, dirlen);
strbuf_addstr(&buf, e->d_name);
unlink(buf.buf);
}
closedir(dir);
strbuf_release(&buf);
}
static void remove_pack_on_signal(int signo)
{
remove_temporary_files();
sigchain_pop(signo);
raise(signo);
}
/*
* Adds all packs hex strings to the fname list, which do not
* have a corresponding .keep file. These packs are not to
* be kept if we are going to pack everything into one file.
*/
static void get_non_kept_pack_filenames(struct string_list *fname_list,
const struct string_list *extra_keep)
{
DIR *dir;
struct dirent *e;
char *fname;
if (!(dir = opendir(packdir)))
return;
while ((e = readdir(dir)) != NULL) {
size_t len;
int i;
for (i = 0; i < extra_keep->nr; i++)
if (!fspathcmp(e->d_name, extra_keep->items[i].string))
break;
if (extra_keep->nr > 0 && i < extra_keep->nr)
continue;
if (!strip_suffix(e->d_name, ".pack", &len))
continue;
fname = xmemdupz(e->d_name, len);
if (!file_exists(mkpath("%s/%s.keep", packdir, fname)))
string_list_append_nodup(fname_list, fname);
else
free(fname);
}
closedir(dir);
}
static void remove_redundant_pack(const char *dir_name, const char *base_name)
{
struct strbuf buf = STRBUF_INIT;
strbuf_addf(&buf, "%s/%s.pack", dir_name, base_name);
unlink_pack_path(buf.buf, 1);
strbuf_release(&buf);
}
struct pack_objects_args {
const char *window;
const char *window_memory;
const char *depth;
const char *threads;
const char *max_pack_size;
int no_reuse_delta;
int no_reuse_object;
int quiet;
int local;
};
static void prepare_pack_objects(struct child_process *cmd,
const struct pack_objects_args *args)
{
argv_array_push(&cmd->args, "pack-objects");
if (args->window)
argv_array_pushf(&cmd->args, "--window=%s", args->window);
if (args->window_memory)
argv_array_pushf(&cmd->args, "--window-memory=%s", args->window_memory);
if (args->depth)
argv_array_pushf(&cmd->args, "--depth=%s", args->depth);
if (args->threads)
argv_array_pushf(&cmd->args, "--threads=%s", args->threads);
if (args->max_pack_size)
argv_array_pushf(&cmd->args, "--max-pack-size=%s", args->max_pack_size);
if (args->no_reuse_delta)
argv_array_pushf(&cmd->args, "--no-reuse-delta");
if (args->no_reuse_object)
argv_array_pushf(&cmd->args, "--no-reuse-object");
if (args->local)
argv_array_push(&cmd->args, "--local");
if (args->quiet)
argv_array_push(&cmd->args, "--quiet");
if (delta_base_offset)
argv_array_push(&cmd->args, "--delta-base-offset");
argv_array_push(&cmd->args, packtmp);
cmd->git_cmd = 1;
cmd->out = -1;
}
/*
* Write oid to the given struct child_process's stdin, starting it first if
* necessary.
*/
static int write_oid(const struct object_id *oid, struct packed_git *pack,
uint32_t pos, void *data)
{
struct child_process *cmd = data;
if (cmd->in == -1) {
if (start_command(cmd))
die(_("could not start pack-objects to repack promisor objects"));
}
xwrite(cmd->in, oid_to_hex(oid), GIT_SHA1_HEXSZ);
xwrite(cmd->in, "\n", 1);
return 0;
}
static void repack_promisor_objects(const struct pack_objects_args *args,
struct string_list *names)
{
struct child_process cmd = CHILD_PROCESS_INIT;
FILE *out;
struct strbuf line = STRBUF_INIT;
prepare_pack_objects(&cmd, args);
cmd.in = -1;
/*
* NEEDSWORK: Giving pack-objects only the OIDs without any ordering
* hints may result in suboptimal deltas in the resulting pack. See if
* the OIDs can be sent with fake paths such that pack-objects can use a
* {type -> existing pack order} ordering when computing deltas instead
* of a {type -> size} ordering, which may produce better deltas.
*/
for_each_packed_object(write_oid, &cmd,
FOR_EACH_OBJECT_PROMISOR_ONLY);
if (cmd.in == -1)
/* No packed objects; cmd was never started */
return;
close(cmd.in);
out = xfdopen(cmd.out, "r");
while (strbuf_getline_lf(&line, out) != EOF) {
char *promisor_name;
int fd;
if (line.len != the_hash_algo->hexsz)
die(_("repack: Expecting full hex object ID lines only from pack-objects."));
string_list_append(names, line.buf);
/*
* pack-objects creates the .pack and .idx files, but not the
* .promisor file. Create the .promisor file, which is empty.
*/
promisor_name = mkpathdup("%s-%s.promisor", packtmp,
line.buf);
fd = open(promisor_name, O_CREAT|O_EXCL|O_WRONLY, 0600);
if (fd < 0)
die_errno(_("unable to create '%s'"), promisor_name);
close(fd);
free(promisor_name);
}
fclose(out);
if (finish_command(&cmd))
die(_("could not finish pack-objects to repack promisor objects"));
}
#define ALL_INTO_ONE 1
#define LOOSEN_UNREACHABLE 2
int cmd_repack(int argc, const char **argv, const char *prefix)
{
struct {
const char *name;
unsigned optional:1;
} exts[] = {
{".pack"},
{".idx"},
{".bitmap", 1},
{".promisor", 1},
};
struct child_process cmd = CHILD_PROCESS_INIT;
struct string_list_item *item;
struct string_list names = STRING_LIST_INIT_DUP;
struct string_list rollback = STRING_LIST_INIT_NODUP;
struct string_list existing_packs = STRING_LIST_INIT_DUP;
struct strbuf line = STRBUF_INIT;
int i, ext, ret, failed;
FILE *out;
/* variables to be filled by option parsing */
int pack_everything = 0;
int delete_redundant = 0;
const char *unpack_unreachable = NULL;
int keep_unreachable = 0;
struct string_list keep_pack_list = STRING_LIST_INIT_NODUP;
int no_update_server_info = 0;
int midx_cleared = 0;
struct pack_objects_args po_args = {NULL};
struct option builtin_repack_options[] = {
OPT_BIT('a', NULL, &pack_everything,
N_("pack everything in a single pack"), ALL_INTO_ONE),
OPT_BIT('A', NULL, &pack_everything,
N_("same as -a, and turn unreachable objects loose"),
LOOSEN_UNREACHABLE | ALL_INTO_ONE),
OPT_BOOL('d', NULL, &delete_redundant,
N_("remove redundant packs, and run git-prune-packed")),
OPT_BOOL('f', NULL, &po_args.no_reuse_delta,
N_("pass --no-reuse-delta to git-pack-objects")),
OPT_BOOL('F', NULL, &po_args.no_reuse_object,
N_("pass --no-reuse-object to git-pack-objects")),
OPT_BOOL('n', NULL, &no_update_server_info,
N_("do not run git-update-server-info")),
OPT__QUIET(&po_args.quiet, N_("be quiet")),
OPT_BOOL('l', "local", &po_args.local,
N_("pass --local to git-pack-objects")),
OPT_BOOL('b', "write-bitmap-index", &write_bitmaps,
N_("write bitmap index")),
OPT_BOOL('i', "delta-islands", &use_delta_islands,
N_("pass --delta-islands to git-pack-objects")),
OPT_STRING(0, "unpack-unreachable", &unpack_unreachable, N_("approxidate"),
N_("with -A, do not loosen objects older than this")),
OPT_BOOL('k', "keep-unreachable", &keep_unreachable,
N_("with -a, repack unreachable objects")),
OPT_STRING(0, "window", &po_args.window, N_("n"),
N_("size of the window used for delta compression")),
OPT_STRING(0, "window-memory", &po_args.window_memory, N_("bytes"),
N_("same as the above, but limit memory size instead of entries count")),
OPT_STRING(0, "depth", &po_args.depth, N_("n"),
N_("limits the maximum delta depth")),
OPT_STRING(0, "threads", &po_args.threads, N_("n"),
N_("limits the maximum number of threads")),
OPT_STRING(0, "max-pack-size", &po_args.max_pack_size, N_("bytes"),
N_("maximum size of each packfile")),
repack: add `repack.packKeptObjects` config var The git-repack command always passes `--honor-pack-keep` to pack-objects. This has traditionally been a good thing, as we do not want to duplicate those objects in a new pack, and we are not going to delete the old pack. However, when bitmaps are in use, it is important for a full repack to include all reachable objects, even if they may be duplicated in a .keep pack. Otherwise, we cannot generate the bitmaps, as the on-disk format requires the set of objects in the pack to be fully closed. Even if the repository does not generally have .keep files, a simultaneous push could cause a race condition in which a .keep file exists at the moment of a repack. The repack may try to include those objects in one of two situations: 1. The pushed .keep pack contains objects that were already in the repository (e.g., blobs due to a revert of an old commit). 2. Receive-pack updates the refs, making the objects reachable, but before it removes the .keep file, the repack runs. In either case, we may prefer to duplicate some objects in the new, full pack, and let the next repack (after the .keep file is cleaned up) take care of removing them. This patch introduces both a command-line and config option to disable the `--honor-pack-keep` option. By default, it is triggered when pack.writeBitmaps (or `--write-bitmap-index` is turned on), but specifying it explicitly can override the behavior (e.g., in cases where you prefer .keep files to bitmaps, but only when they are present). Note that this option just disables the pack-objects behavior. We still leave packs with a .keep in place, as we do not necessarily know that we have duplicated all of their objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-04 04:04:20 +08:00
OPT_BOOL(0, "pack-kept-objects", &pack_kept_objects,
N_("repack objects in packs marked with .keep")),
OPT_STRING_LIST(0, "keep-pack", &keep_pack_list, N_("name"),
N_("do not repack this pack")),
OPT_END()
};
git_config(repack_config, NULL);
argc = parse_options(argc, argv, prefix, builtin_repack_options,
git_repack_usage, 0);
if (delete_redundant && repository_format_precious_objects)
die(_("cannot delete packs in a precious-objects repo"));
if (keep_unreachable &&
(unpack_unreachable || (pack_everything & LOOSEN_UNREACHABLE)))
die(_("--keep-unreachable and -A are incompatible"));
if (write_bitmaps < 0) {
if (!(pack_everything & ALL_INTO_ONE) ||
!is_bare_repository())
write_bitmaps = 0;
}
repack: add `repack.packKeptObjects` config var The git-repack command always passes `--honor-pack-keep` to pack-objects. This has traditionally been a good thing, as we do not want to duplicate those objects in a new pack, and we are not going to delete the old pack. However, when bitmaps are in use, it is important for a full repack to include all reachable objects, even if they may be duplicated in a .keep pack. Otherwise, we cannot generate the bitmaps, as the on-disk format requires the set of objects in the pack to be fully closed. Even if the repository does not generally have .keep files, a simultaneous push could cause a race condition in which a .keep file exists at the moment of a repack. The repack may try to include those objects in one of two situations: 1. The pushed .keep pack contains objects that were already in the repository (e.g., blobs due to a revert of an old commit). 2. Receive-pack updates the refs, making the objects reachable, but before it removes the .keep file, the repack runs. In either case, we may prefer to duplicate some objects in the new, full pack, and let the next repack (after the .keep file is cleaned up) take care of removing them. This patch introduces both a command-line and config option to disable the `--honor-pack-keep` option. By default, it is triggered when pack.writeBitmaps (or `--write-bitmap-index` is turned on), but specifying it explicitly can override the behavior (e.g., in cases where you prefer .keep files to bitmaps, but only when they are present). Note that this option just disables the pack-objects behavior. We still leave packs with a .keep in place, as we do not necessarily know that we have duplicated all of their objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-04 04:04:20 +08:00
if (pack_kept_objects < 0)
pack_kept_objects = write_bitmaps > 0;
repack: add `repack.packKeptObjects` config var The git-repack command always passes `--honor-pack-keep` to pack-objects. This has traditionally been a good thing, as we do not want to duplicate those objects in a new pack, and we are not going to delete the old pack. However, when bitmaps are in use, it is important for a full repack to include all reachable objects, even if they may be duplicated in a .keep pack. Otherwise, we cannot generate the bitmaps, as the on-disk format requires the set of objects in the pack to be fully closed. Even if the repository does not generally have .keep files, a simultaneous push could cause a race condition in which a .keep file exists at the moment of a repack. The repack may try to include those objects in one of two situations: 1. The pushed .keep pack contains objects that were already in the repository (e.g., blobs due to a revert of an old commit). 2. Receive-pack updates the refs, making the objects reachable, but before it removes the .keep file, the repack runs. In either case, we may prefer to duplicate some objects in the new, full pack, and let the next repack (after the .keep file is cleaned up) take care of removing them. This patch introduces both a command-line and config option to disable the `--honor-pack-keep` option. By default, it is triggered when pack.writeBitmaps (or `--write-bitmap-index` is turned on), but specifying it explicitly can override the behavior (e.g., in cases where you prefer .keep files to bitmaps, but only when they are present). Note that this option just disables the pack-objects behavior. We still leave packs with a .keep in place, as we do not necessarily know that we have duplicated all of their objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-04 04:04:20 +08:00
if (write_bitmaps && !(pack_everything & ALL_INTO_ONE))
die(_(incremental_bitmap_conflict_error));
packdir = mkpathdup("%s/pack", get_object_directory());
packtmp = mkpathdup("%s/.tmp-%d-pack", packdir, (int)getpid());
sigchain_push_common(remove_pack_on_signal);
prepare_pack_objects(&cmd, &po_args);
argv_array_push(&cmd.args, "--keep-true-parents");
repack: add `repack.packKeptObjects` config var The git-repack command always passes `--honor-pack-keep` to pack-objects. This has traditionally been a good thing, as we do not want to duplicate those objects in a new pack, and we are not going to delete the old pack. However, when bitmaps are in use, it is important for a full repack to include all reachable objects, even if they may be duplicated in a .keep pack. Otherwise, we cannot generate the bitmaps, as the on-disk format requires the set of objects in the pack to be fully closed. Even if the repository does not generally have .keep files, a simultaneous push could cause a race condition in which a .keep file exists at the moment of a repack. The repack may try to include those objects in one of two situations: 1. The pushed .keep pack contains objects that were already in the repository (e.g., blobs due to a revert of an old commit). 2. Receive-pack updates the refs, making the objects reachable, but before it removes the .keep file, the repack runs. In either case, we may prefer to duplicate some objects in the new, full pack, and let the next repack (after the .keep file is cleaned up) take care of removing them. This patch introduces both a command-line and config option to disable the `--honor-pack-keep` option. By default, it is triggered when pack.writeBitmaps (or `--write-bitmap-index` is turned on), but specifying it explicitly can override the behavior (e.g., in cases where you prefer .keep files to bitmaps, but only when they are present). Note that this option just disables the pack-objects behavior. We still leave packs with a .keep in place, as we do not necessarily know that we have duplicated all of their objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-04 04:04:20 +08:00
if (!pack_kept_objects)
argv_array_push(&cmd.args, "--honor-pack-keep");
for (i = 0; i < keep_pack_list.nr; i++)
argv_array_pushf(&cmd.args, "--keep-pack=%s",
keep_pack_list.items[i].string);
argv_array_push(&cmd.args, "--non-empty");
argv_array_push(&cmd.args, "--all");
argv_array_push(&cmd.args, "--reflog");
argv_array_push(&cmd.args, "--indexed-objects");
if (repository_format_partial_clone)
argv_array_push(&cmd.args, "--exclude-promisor-objects");
if (write_bitmaps > 0)
argv_array_push(&cmd.args, "--write-bitmap-index");
else if (write_bitmaps < 0)
argv_array_push(&cmd.args, "--write-bitmap-index-quiet");
if (use_delta_islands)
argv_array_push(&cmd.args, "--delta-islands");
if (pack_everything & ALL_INTO_ONE) {
get_non_kept_pack_filenames(&existing_packs, &keep_pack_list);
repack_promisor_objects(&po_args, &names);
if (existing_packs.nr && delete_redundant) {
if (unpack_unreachable) {
argv_array_pushf(&cmd.args,
"--unpack-unreachable=%s",
unpack_unreachable);
argv_array_push(&cmd.env_array, "GIT_REF_PARANOIA=1");
} else if (pack_everything & LOOSEN_UNREACHABLE) {
argv_array_push(&cmd.args,
"--unpack-unreachable");
} else if (keep_unreachable) {
argv_array_push(&cmd.args, "--keep-unreachable");
argv_array_push(&cmd.args, "--pack-loose-unreachable");
} else {
argv_array_push(&cmd.env_array, "GIT_REF_PARANOIA=1");
}
}
} else {
argv_array_push(&cmd.args, "--unpacked");
argv_array_push(&cmd.args, "--incremental");
}
cmd.no_stdin = 1;
ret = start_command(&cmd);
if (ret)
return ret;
out = xfdopen(cmd.out, "r");
while (strbuf_getline_lf(&line, out) != EOF) {
if (line.len != the_hash_algo->hexsz)
die(_("repack: Expecting full hex object ID lines only from pack-objects."));
string_list_append(&names, line.buf);
}
fclose(out);
ret = finish_command(&cmd);
if (ret)
return ret;
if (!names.nr && !po_args.quiet)
printf_ln(_("Nothing new to pack."));
close_object_store(the_repository->objects);
/*
* Ok we have prepared all new packfiles.
* First see if there are packs of the same name and if so
* if we can move them out of the way (this can happen if we
* repacked immediately after packing fully.
*/
failed = 0;
for_each_string_list_item(item, &names) {
for (ext = 0; ext < ARRAY_SIZE(exts); ext++) {
char *fname, *fname_old;
if (!midx_cleared) {
clear_midx_file(the_repository);
midx_cleared = 1;
}
fname = mkpathdup("%s/pack-%s%s", packdir,
item->string, exts[ext].name);
if (!file_exists(fname)) {
free(fname);
continue;
}
fname_old = mkpathdup("%s/old-%s%s", packdir,
item->string, exts[ext].name);
if (file_exists(fname_old))
if (unlink(fname_old))
failed = 1;
if (!failed && rename(fname, fname_old)) {
free(fname);
free(fname_old);
failed = 1;
break;
} else {
string_list_append(&rollback, fname);
free(fname_old);
}
}
if (failed)
break;
}
if (failed) {
struct string_list rollback_failure = STRING_LIST_INIT_DUP;
for_each_string_list_item(item, &rollback) {
char *fname, *fname_old;
fname = mkpathdup("%s/%s", packdir, item->string);
fname_old = mkpathdup("%s/old-%s", packdir, item->string);
if (rename(fname_old, fname))
string_list_append(&rollback_failure, fname);
free(fname);
free(fname_old);
}
if (rollback_failure.nr) {
int i;
fprintf(stderr,
_("WARNING: Some packs in use have been renamed by\n"
"WARNING: prefixing old- to their name, in order to\n"
"WARNING: replace them with the new version of the\n"
"WARNING: file. But the operation failed, and the\n"
"WARNING: attempt to rename them back to their\n"
"WARNING: original names also failed.\n"
"WARNING: Please rename them in %s manually:\n"), packdir);
for (i = 0; i < rollback_failure.nr; i++)
fprintf(stderr, "WARNING: old-%s -> %s\n",
rollback_failure.items[i].string,
rollback_failure.items[i].string);
}
exit(1);
}
/* Now the ones with the same name are out of the way... */
for_each_string_list_item(item, &names) {
for (ext = 0; ext < ARRAY_SIZE(exts); ext++) {
char *fname, *fname_old;
struct stat statbuffer;
int exists = 0;
fname = mkpathdup("%s/pack-%s%s",
packdir, item->string, exts[ext].name);
fname_old = mkpathdup("%s-%s%s",
packtmp, item->string, exts[ext].name);
if (!stat(fname_old, &statbuffer)) {
statbuffer.st_mode &= ~(S_IWUSR | S_IWGRP | S_IWOTH);
chmod(fname_old, statbuffer.st_mode);
exists = 1;
}
if (exists || !exts[ext].optional) {
if (rename(fname_old, fname))
die_errno(_("renaming '%s' failed"), fname_old);
}
free(fname);
free(fname_old);
}
}
/* Remove the "old-" files */
for_each_string_list_item(item, &names) {
for (ext = 0; ext < ARRAY_SIZE(exts); ext++) {
char *fname;
fname = mkpathdup("%s/old-%s%s",
packdir,
item->string,
exts[ext].name);
if (remove_path(fname))
warning(_("failed to remove '%s'"), fname);
free(fname);
}
}
/* End of pack replacement. */
reprepare_packed_git(the_repository);
if (delete_redundant) {
const int hexsz = the_hash_algo->hexsz;
int opts = 0;
string_list_sort(&names);
for_each_string_list_item(item, &existing_packs) {
char *sha1;
size_t len = strlen(item->string);
if (len < hexsz)
continue;
sha1 = item->string + len - hexsz;
if (!string_list_has_string(&names, sha1))
remove_redundant_pack(packdir, item->string);
}
if (!po_args.quiet && isatty(2))
opts |= PRUNE_PACKED_VERBOSE;
prune_packed_objects(opts);
repack -ad: prune the list of shallow commits `git repack` can drop unreachable commits without further warning, making the corresponding entries in `.git/shallow` invalid, which causes serious problems when deepening the branches. One scenario where unreachable commits are dropped by `git repack` is when a `git fetch --prune` (or even a `git fetch` when a ref was force-pushed in the meantime) can make a commit unreachable that was reachable before. Therefore it is not safe to assume that a `git repack -adlf` will keep unreachable commits alone (under the assumption that they had not been packed in the first place, which is an assumption at least some of Git's code seems to make). This is particularly important to keep in mind when looking at the `.git/shallow` file: if any commits listed in that file become unreachable, it is not a problem, but if they go missing, it *is* a problem. One symptom of this problem is that a deepening fetch may now fail with fatal: error in object: unshallow <commit-hash> To avoid this problem, let's prune the shallow list in `git repack` when the `-d` option is passed, unless `-A` is passed, too (which would force the now-unreachable objects to be turned into loose objects instead of being deleted). Additionally, we also need to take `--keep-reachable` and `--unpack-unreachable=<date>` into account. Note: an alternative solution discussed during the review of this patch was to teach `git fetch` to simply ignore entries in .git/shallow if the corresponding commits do not exist locally. A quick test, however, revealed that the .git/shallow file is written during a shallow *clone*, in which case the commits do not exist, either, but the "shallow" line *does* need to be sent. Therefore, this approach would be a lot more finicky than the approach presented by the this patch. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-24 23:56:13 +08:00
if (!keep_unreachable &&
(!(pack_everything & LOOSEN_UNREACHABLE) ||
unpack_unreachable) &&
is_repository_shallow(the_repository))
prune_shallow(PRUNE_QUICK);
}
if (!no_update_server_info)
update_server_info(0);
remove_temporary_files();
if (git_env_bool(GIT_TEST_MULTI_PACK_INDEX, 0))
write_midx_file(get_object_directory());
string_list_clear(&names, 0);
string_list_clear(&rollback, 0);
string_list_clear(&existing_packs, 0);
strbuf_release(&line);
return 0;
}