git/archive-tar.c

495 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (c) 2005, 2006 Rene Scharfe
*/
#include "cache.h"
#include "config.h"
#include "tar.h"
#include "archive.h"
#include "streaming.h"
#include "run-command.h"
#define RECORDSIZE (512)
#define BLOCKSIZE (RECORDSIZE * 20)
static char block[BLOCKSIZE];
static unsigned long offset;
static int tar_umask = 002;
static int write_tar_filter_archive(const struct archiver *ar,
struct archiver_args *args);
archive-tar: write extended headers for file sizes >= 8GB The ustar format has a fixed-length field for the size of each file entry which is supposed to contain up to 11 bytes of octal-formatted data plus a NUL or space terminator. These means that the largest size we can represent is 077777777777, or 1 byte short of 8GB. The correct solution for a larger file, according to POSIX.1-2001, is to add an extended pax header, similar to how we handle long filenames. This patch does that, and writes zero for the size field in the ustar header (the last bit is not mentioned by POSIX, but it matches how GNU tar behaves with --format=pax). This should be a strict improvement over the current behavior, which is to die in xsnprintf with a "BUG". However, there's some interesting history here. Prior to f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), we silently overflowed the "size" field. The extra bytes ended up in the "mtime" field of the header, which was then immediately written itself, overwriting our extra bytes. What that means depends on how many bytes we wrote. If the size was 64GB or greater, then we actually overflowed digits into the mtime field, meaning our value was effectively right-shifted by those lost octal digits. And this patch is again a strict improvement over that. But if the size was between 8GB and 64GB, then our 12-byte field held all of the actual digits, and only our NUL terminator overflowed. According to POSIX, there should be a NUL or space at the end of the field. However, GNU tar seems to be lenient here, and will correctly parse a size up 64GB (minus one) from the field. So sizes in this range might have just worked, depending on the implementation reading the tarfile. This patch is mostly still an improvement there, as the 8GB limit is specifically mentioned in POSIX as the correct limit. But it's possible that it could be a regression (versus the pre-f2f0267 state) if all of the following are true: 1. You have a file between 8GB and 64GB. 2. Your tar implementation _doesn't_ know about pax extended headers. 3. Your tar implementation _does_ parse 12-byte sizes from the ustar header without a delimiter. It's probably not worth worrying about such an obscure set of conditions, but I'm documenting it here just in case. Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:16 +08:00
/*
* This is the max value that a ustar size header can specify, as it is fixed
* at 11 octal digits. POSIX specifies that we switch to extended headers at
* this size.
archive-tar: write extended headers for far-future mtime The ustar format represents timestamps as seconds since the epoch, but only has room to store 11 octal digits. To express anything larger, we need to use an extended header. This is exactly the same case we fixed for the size field in the previous commit, and the solution here follows the same pattern. This is even mentioned as an issue in f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), but since it only affected things far in the future, it wasn't deemed worth dealing with. But note that my calculations claiming thousands of years were off there; because our xsnprintf produces a NUL byte, we only have until the year 2242 to fix this. Given that this is just around the corner (geologically speaking, anyway), and because it's easy to fix, let's just make it work. Unlike the previous fix for "size", where we had to write an individual extended header for each file, we can write one global header (since we have only one mtime for the whole archive). There's a slight bit of trickiness there. We may already be writing a global header with a "comment" field for the commit sha1. So we need to write our new field into the same header. To do this, we push the decision of whether to write such a header down into write_global_extended_header(), which will now assemble the header as it sees fit, and will return early if we have nothing to write (in practice, we'll only have a large mtime if it comes from a commit, but this makes it also work if you set your system clock ahead such that time() returns a huge value). Note that we don't (and never did) handle negative timestamps (i.e., before 1970). This would probably not be too hard to support in the same way, but since git does not support negative timestamps at all, I didn't bother here. After writing the extended header, we munge the timestamp in the ustar headers to the maximum-allowable size. This is wrong, but it's the least-wrong thing we can provide to a tar implementation that doesn't understand pax headers (it's also what GNU tar does). Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:20 +08:00
*
* Likewise for the mtime (which happens to use a buffer of the same size).
archive-tar: write extended headers for file sizes >= 8GB The ustar format has a fixed-length field for the size of each file entry which is supposed to contain up to 11 bytes of octal-formatted data plus a NUL or space terminator. These means that the largest size we can represent is 077777777777, or 1 byte short of 8GB. The correct solution for a larger file, according to POSIX.1-2001, is to add an extended pax header, similar to how we handle long filenames. This patch does that, and writes zero for the size field in the ustar header (the last bit is not mentioned by POSIX, but it matches how GNU tar behaves with --format=pax). This should be a strict improvement over the current behavior, which is to die in xsnprintf with a "BUG". However, there's some interesting history here. Prior to f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), we silently overflowed the "size" field. The extra bytes ended up in the "mtime" field of the header, which was then immediately written itself, overwriting our extra bytes. What that means depends on how many bytes we wrote. If the size was 64GB or greater, then we actually overflowed digits into the mtime field, meaning our value was effectively right-shifted by those lost octal digits. And this patch is again a strict improvement over that. But if the size was between 8GB and 64GB, then our 12-byte field held all of the actual digits, and only our NUL terminator overflowed. According to POSIX, there should be a NUL or space at the end of the field. However, GNU tar seems to be lenient here, and will correctly parse a size up 64GB (minus one) from the field. So sizes in this range might have just worked, depending on the implementation reading the tarfile. This patch is mostly still an improvement there, as the 8GB limit is specifically mentioned in POSIX as the correct limit. But it's possible that it could be a regression (versus the pre-f2f0267 state) if all of the following are true: 1. You have a file between 8GB and 64GB. 2. Your tar implementation _doesn't_ know about pax extended headers. 3. Your tar implementation _does_ parse 12-byte sizes from the ustar header without a delimiter. It's probably not worth worrying about such an obscure set of conditions, but I'm documenting it here just in case. Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:16 +08:00
*/
#if ULONG_MAX == 0xFFFFFFFF
#define USTAR_MAX_SIZE ULONG_MAX
#else
archive-tar: fix a sparse 'constant too large' warning Commit dddbad728c ("timestamp_t: a new data type for timestamps", 26-04-2017) introduced a new typedef 'timestamp_t', as a synonym for an unsigned long, which was used at the time to represent timestamps in git. A later commit 28f4aee3fb ("use uintmax_t for timestamps", 26-04-2017) changed the typedef to use an 'uintmax_t' for the timestamp representation type. When building on a 32-bit Linux system, sparse complains that a constant (USTAR_MAX_MTIME) used to detect a 'far-future mtime' timestamp, is too large; 'warning: constant 077777777777UL is so big it is unsigned long long' on lines 335 and 338 of archive-tar.c. Note that both gcc and clang only issue a warning if this constant is used in a context that requires an 'unsigned long' (rather than an uintmax_t). (Since TIME_MAX is no longer equal to 0xFFFFFFFF, even on a 32-bit system, the macro USTAR_MAX_MTIME is set to 077777777777UL, which cannot be represented as an 'unsigned long' constant). In order to suppress the warning, change the definition of the macro constant USTAR_MAX_MTIME to use an 'ULL' type suffix. In a similar vein, on systems which use a 64-bit representation of the 'unsigned long' type, the USTAR_MAX_SIZE constant macro is defined with the value 077777777777ULL. Although this does not cause any warning messages to be issued, it would be more appropriate for this constant to use an 'UL' type suffix rather than 'ULL'. Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-09 04:34:58 +08:00
#define USTAR_MAX_SIZE 077777777777UL
#endif
#if TIME_MAX == 0xFFFFFFFF
#define USTAR_MAX_MTIME TIME_MAX
#else
archive-tar: fix a sparse 'constant too large' warning Commit dddbad728c ("timestamp_t: a new data type for timestamps", 26-04-2017) introduced a new typedef 'timestamp_t', as a synonym for an unsigned long, which was used at the time to represent timestamps in git. A later commit 28f4aee3fb ("use uintmax_t for timestamps", 26-04-2017) changed the typedef to use an 'uintmax_t' for the timestamp representation type. When building on a 32-bit Linux system, sparse complains that a constant (USTAR_MAX_MTIME) used to detect a 'far-future mtime' timestamp, is too large; 'warning: constant 077777777777UL is so big it is unsigned long long' on lines 335 and 338 of archive-tar.c. Note that both gcc and clang only issue a warning if this constant is used in a context that requires an 'unsigned long' (rather than an uintmax_t). (Since TIME_MAX is no longer equal to 0xFFFFFFFF, even on a 32-bit system, the macro USTAR_MAX_MTIME is set to 077777777777UL, which cannot be represented as an 'unsigned long' constant). In order to suppress the warning, change the definition of the macro constant USTAR_MAX_MTIME to use an 'ULL' type suffix. In a similar vein, on systems which use a 64-bit representation of the 'unsigned long' type, the USTAR_MAX_SIZE constant macro is defined with the value 077777777777ULL. Although this does not cause any warning messages to be issued, it would be more appropriate for this constant to use an 'UL' type suffix rather than 'ULL'. Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-09 04:34:58 +08:00
#define USTAR_MAX_MTIME 077777777777ULL
#endif
archive-tar: write extended headers for file sizes >= 8GB The ustar format has a fixed-length field for the size of each file entry which is supposed to contain up to 11 bytes of octal-formatted data plus a NUL or space terminator. These means that the largest size we can represent is 077777777777, or 1 byte short of 8GB. The correct solution for a larger file, according to POSIX.1-2001, is to add an extended pax header, similar to how we handle long filenames. This patch does that, and writes zero for the size field in the ustar header (the last bit is not mentioned by POSIX, but it matches how GNU tar behaves with --format=pax). This should be a strict improvement over the current behavior, which is to die in xsnprintf with a "BUG". However, there's some interesting history here. Prior to f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), we silently overflowed the "size" field. The extra bytes ended up in the "mtime" field of the header, which was then immediately written itself, overwriting our extra bytes. What that means depends on how many bytes we wrote. If the size was 64GB or greater, then we actually overflowed digits into the mtime field, meaning our value was effectively right-shifted by those lost octal digits. And this patch is again a strict improvement over that. But if the size was between 8GB and 64GB, then our 12-byte field held all of the actual digits, and only our NUL terminator overflowed. According to POSIX, there should be a NUL or space at the end of the field. However, GNU tar seems to be lenient here, and will correctly parse a size up 64GB (minus one) from the field. So sizes in this range might have just worked, depending on the implementation reading the tarfile. This patch is mostly still an improvement there, as the 8GB limit is specifically mentioned in POSIX as the correct limit. But it's possible that it could be a regression (versus the pre-f2f0267 state) if all of the following are true: 1. You have a file between 8GB and 64GB. 2. Your tar implementation _doesn't_ know about pax extended headers. 3. Your tar implementation _does_ parse 12-byte sizes from the ustar header without a delimiter. It's probably not worth worrying about such an obscure set of conditions, but I'm documenting it here just in case. Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:16 +08:00
/* writes out the whole block, but only if it is full */
static void write_if_needed(void)
{
if (offset == BLOCKSIZE) {
write_or_die(1, block, BLOCKSIZE);
offset = 0;
}
}
/*
* queues up writes, so that all our write(2) calls write exactly one
* full block; pads writes to RECORDSIZE
*/
static void do_write_blocked(const void *data, unsigned long size)
{
const char *buf = data;
if (offset) {
unsigned long chunk = BLOCKSIZE - offset;
if (size < chunk)
chunk = size;
memcpy(block + offset, buf, chunk);
size -= chunk;
offset += chunk;
buf += chunk;
write_if_needed();
}
while (size >= BLOCKSIZE) {
write_or_die(1, buf, BLOCKSIZE);
size -= BLOCKSIZE;
buf += BLOCKSIZE;
}
if (size) {
memcpy(block + offset, buf, size);
offset += size;
}
}
static void finish_record(void)
{
unsigned long tail;
tail = offset % RECORDSIZE;
if (tail) {
memset(block + offset, 0, RECORDSIZE - tail);
offset += RECORDSIZE - tail;
}
write_if_needed();
}
static void write_blocked(const void *data, unsigned long size)
{
do_write_blocked(data, size);
finish_record();
}
/*
* The end of tar archives is marked by 2*512 nul bytes and after that
* follows the rest of the block (if any).
*/
static void write_trailer(void)
{
int tail = BLOCKSIZE - offset;
memset(block + offset, 0, tail);
write_or_die(1, block, BLOCKSIZE);
if (tail < 2 * RECORDSIZE) {
memset(block, 0, offset);
write_or_die(1, block, BLOCKSIZE);
}
}
/*
* queues up writes, so that all our write(2) calls write exactly one
* full block; pads writes to RECORDSIZE
*/
static int stream_blocked(const struct object_id *oid)
{
struct git_istream *st;
enum object_type type;
unsigned long sz;
char buf[BLOCKSIZE];
ssize_t readlen;
st = open_istream(oid, &type, &sz, NULL);
if (!st)
return error("cannot stream blob %s", oid_to_hex(oid));
for (;;) {
readlen = read_istream(st, buf, sizeof(buf));
if (readlen <= 0)
break;
do_write_blocked(buf, readlen);
}
close_istream(st);
if (!readlen)
finish_record();
return readlen;
}
/*
* pax extended header records have the format "%u %s=%s\n". %u contains
* the size of the whole string (including the %u), the first %s is the
* keyword, the second one is the value. This function constructs such a
* string and appends it to a struct strbuf.
*/
static void strbuf_append_ext_header(struct strbuf *sb, const char *keyword,
const char *value, unsigned int valuelen)
{
int len, tmp;
/* "%u %s=%s\n" */
len = 1 + 1 + strlen(keyword) + 1 + valuelen + 1;
for (tmp = len; tmp > 9; tmp /= 10)
len++;
strbuf_grow(sb, len);
strbuf_addf(sb, "%u %s=", len, keyword);
strbuf_add(sb, value, valuelen);
strbuf_addch(sb, '\n');
}
archive-tar: write extended headers for file sizes >= 8GB The ustar format has a fixed-length field for the size of each file entry which is supposed to contain up to 11 bytes of octal-formatted data plus a NUL or space terminator. These means that the largest size we can represent is 077777777777, or 1 byte short of 8GB. The correct solution for a larger file, according to POSIX.1-2001, is to add an extended pax header, similar to how we handle long filenames. This patch does that, and writes zero for the size field in the ustar header (the last bit is not mentioned by POSIX, but it matches how GNU tar behaves with --format=pax). This should be a strict improvement over the current behavior, which is to die in xsnprintf with a "BUG". However, there's some interesting history here. Prior to f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), we silently overflowed the "size" field. The extra bytes ended up in the "mtime" field of the header, which was then immediately written itself, overwriting our extra bytes. What that means depends on how many bytes we wrote. If the size was 64GB or greater, then we actually overflowed digits into the mtime field, meaning our value was effectively right-shifted by those lost octal digits. And this patch is again a strict improvement over that. But if the size was between 8GB and 64GB, then our 12-byte field held all of the actual digits, and only our NUL terminator overflowed. According to POSIX, there should be a NUL or space at the end of the field. However, GNU tar seems to be lenient here, and will correctly parse a size up 64GB (minus one) from the field. So sizes in this range might have just worked, depending on the implementation reading the tarfile. This patch is mostly still an improvement there, as the 8GB limit is specifically mentioned in POSIX as the correct limit. But it's possible that it could be a regression (versus the pre-f2f0267 state) if all of the following are true: 1. You have a file between 8GB and 64GB. 2. Your tar implementation _doesn't_ know about pax extended headers. 3. Your tar implementation _does_ parse 12-byte sizes from the ustar header without a delimiter. It's probably not worth worrying about such an obscure set of conditions, but I'm documenting it here just in case. Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:16 +08:00
/*
* Like strbuf_append_ext_header, but for numeric values.
*/
static void strbuf_append_ext_header_uint(struct strbuf *sb,
const char *keyword,
uintmax_t value)
{
char buf[40]; /* big enough for 2^128 in decimal, plus NUL */
int len;
len = xsnprintf(buf, sizeof(buf), "%"PRIuMAX, value);
strbuf_append_ext_header(sb, keyword, buf, len);
}
static unsigned int ustar_header_chksum(const struct ustar_header *header)
{
const unsigned char *p = (const unsigned char *)header;
unsigned int chksum = 0;
while (p < (const unsigned char *)header->chksum)
chksum += *p++;
chksum += sizeof(header->chksum) * ' ';
p += sizeof(header->chksum);
while (p < (const unsigned char *)header + sizeof(struct ustar_header))
chksum += *p++;
return chksum;
}
static size_t get_path_prefix(const char *path, size_t pathlen, size_t maxlen)
{
size_t i = pathlen;
if (i > 1 && path[i - 1] == '/')
i--;
if (i > maxlen)
i = maxlen;
do {
i--;
} while (i > 0 && path[i] != '/');
return i;
}
static void prepare_header(struct archiver_args *args,
struct ustar_header *header,
unsigned int mode, unsigned long size)
{
xsnprintf(header->mode, sizeof(header->mode), "%07o", mode & 07777);
xsnprintf(header->size, sizeof(header->size), "%011lo", S_ISREG(mode) ? size : 0);
xsnprintf(header->mtime, sizeof(header->mtime), "%011lo", (unsigned long) args->time);
xsnprintf(header->uid, sizeof(header->uid), "%07o", 0);
xsnprintf(header->gid, sizeof(header->gid), "%07o", 0);
strlcpy(header->uname, "root", sizeof(header->uname));
strlcpy(header->gname, "root", sizeof(header->gname));
xsnprintf(header->devmajor, sizeof(header->devmajor), "%07o", 0);
xsnprintf(header->devminor, sizeof(header->devminor), "%07o", 0);
memcpy(header->magic, "ustar", 6);
memcpy(header->version, "00", 2);
xsnprintf(header->chksum, sizeof(header->chksum), "%07o", ustar_header_chksum(header));
}
static void write_extended_header(struct archiver_args *args,
const struct object_id *oid,
const void *buffer, unsigned long size)
{
struct ustar_header header;
unsigned int mode;
memset(&header, 0, sizeof(header));
*header.typeflag = TYPEFLAG_EXT_HEADER;
mode = 0100666;
xsnprintf(header.name, sizeof(header.name), "%s.paxheader", oid_to_hex(oid));
prepare_header(args, &header, mode, size);
write_blocked(&header, sizeof(header));
write_blocked(buffer, size);
}
static int write_tar_entry(struct archiver_args *args,
const struct object_id *oid,
const char *path, size_t pathlen,
unsigned int mode)
{
struct ustar_header header;
struct strbuf ext_header = STRBUF_INIT;
unsigned int old_mode = mode;
archive-tar: write extended headers for file sizes >= 8GB The ustar format has a fixed-length field for the size of each file entry which is supposed to contain up to 11 bytes of octal-formatted data plus a NUL or space terminator. These means that the largest size we can represent is 077777777777, or 1 byte short of 8GB. The correct solution for a larger file, according to POSIX.1-2001, is to add an extended pax header, similar to how we handle long filenames. This patch does that, and writes zero for the size field in the ustar header (the last bit is not mentioned by POSIX, but it matches how GNU tar behaves with --format=pax). This should be a strict improvement over the current behavior, which is to die in xsnprintf with a "BUG". However, there's some interesting history here. Prior to f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), we silently overflowed the "size" field. The extra bytes ended up in the "mtime" field of the header, which was then immediately written itself, overwriting our extra bytes. What that means depends on how many bytes we wrote. If the size was 64GB or greater, then we actually overflowed digits into the mtime field, meaning our value was effectively right-shifted by those lost octal digits. And this patch is again a strict improvement over that. But if the size was between 8GB and 64GB, then our 12-byte field held all of the actual digits, and only our NUL terminator overflowed. According to POSIX, there should be a NUL or space at the end of the field. However, GNU tar seems to be lenient here, and will correctly parse a size up 64GB (minus one) from the field. So sizes in this range might have just worked, depending on the implementation reading the tarfile. This patch is mostly still an improvement there, as the 8GB limit is specifically mentioned in POSIX as the correct limit. But it's possible that it could be a regression (versus the pre-f2f0267 state) if all of the following are true: 1. You have a file between 8GB and 64GB. 2. Your tar implementation _doesn't_ know about pax extended headers. 3. Your tar implementation _does_ parse 12-byte sizes from the ustar header without a delimiter. It's probably not worth worrying about such an obscure set of conditions, but I'm documenting it here just in case. Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:16 +08:00
unsigned long size, size_in_header;
void *buffer;
int err = 0;
memset(&header, 0, sizeof(header));
if (S_ISDIR(mode) || S_ISGITLINK(mode)) {
*header.typeflag = TYPEFLAG_DIR;
mode = (mode | 0777) & ~tar_umask;
} else if (S_ISLNK(mode)) {
*header.typeflag = TYPEFLAG_LNK;
mode |= 0777;
} else if (S_ISREG(mode)) {
*header.typeflag = TYPEFLAG_REG;
mode = (mode | ((mode & 0100) ? 0777 : 0666)) & ~tar_umask;
} else {
return error("unsupported file mode: 0%o (SHA1: %s)",
mode, oid_to_hex(oid));
}
if (pathlen > sizeof(header.name)) {
size_t plen = get_path_prefix(path, pathlen,
sizeof(header.prefix));
size_t rest = pathlen - plen - 1;
if (plen > 0 && rest <= sizeof(header.name)) {
memcpy(header.prefix, path, plen);
memcpy(header.name, path + plen + 1, rest);
} else {
xsnprintf(header.name, sizeof(header.name), "%s.data",
oid_to_hex(oid));
strbuf_append_ext_header(&ext_header, "path",
path, pathlen);
}
} else
memcpy(header.name, path, pathlen);
if (S_ISREG(mode) && !args->convert &&
oid_object_info(oid, &size) == OBJ_BLOB &&
size > big_file_threshold)
buffer = NULL;
else if (S_ISLNK(mode) || S_ISREG(mode)) {
enum object_type type;
buffer = object_file_to_archive(args, path, oid, old_mode, &type, &size);
if (!buffer)
return error("cannot read %s", oid_to_hex(oid));
} else {
buffer = NULL;
size = 0;
}
if (S_ISLNK(mode)) {
if (size > sizeof(header.linkname)) {
xsnprintf(header.linkname, sizeof(header.linkname),
"see %s.paxheader", oid_to_hex(oid));
strbuf_append_ext_header(&ext_header, "linkpath",
buffer, size);
} else
memcpy(header.linkname, buffer, size);
}
archive-tar: write extended headers for file sizes >= 8GB The ustar format has a fixed-length field for the size of each file entry which is supposed to contain up to 11 bytes of octal-formatted data plus a NUL or space terminator. These means that the largest size we can represent is 077777777777, or 1 byte short of 8GB. The correct solution for a larger file, according to POSIX.1-2001, is to add an extended pax header, similar to how we handle long filenames. This patch does that, and writes zero for the size field in the ustar header (the last bit is not mentioned by POSIX, but it matches how GNU tar behaves with --format=pax). This should be a strict improvement over the current behavior, which is to die in xsnprintf with a "BUG". However, there's some interesting history here. Prior to f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), we silently overflowed the "size" field. The extra bytes ended up in the "mtime" field of the header, which was then immediately written itself, overwriting our extra bytes. What that means depends on how many bytes we wrote. If the size was 64GB or greater, then we actually overflowed digits into the mtime field, meaning our value was effectively right-shifted by those lost octal digits. And this patch is again a strict improvement over that. But if the size was between 8GB and 64GB, then our 12-byte field held all of the actual digits, and only our NUL terminator overflowed. According to POSIX, there should be a NUL or space at the end of the field. However, GNU tar seems to be lenient here, and will correctly parse a size up 64GB (minus one) from the field. So sizes in this range might have just worked, depending on the implementation reading the tarfile. This patch is mostly still an improvement there, as the 8GB limit is specifically mentioned in POSIX as the correct limit. But it's possible that it could be a regression (versus the pre-f2f0267 state) if all of the following are true: 1. You have a file between 8GB and 64GB. 2. Your tar implementation _doesn't_ know about pax extended headers. 3. Your tar implementation _does_ parse 12-byte sizes from the ustar header without a delimiter. It's probably not worth worrying about such an obscure set of conditions, but I'm documenting it here just in case. Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:16 +08:00
size_in_header = size;
if (S_ISREG(mode) && size > USTAR_MAX_SIZE) {
size_in_header = 0;
strbuf_append_ext_header_uint(&ext_header, "size", size);
}
prepare_header(args, &header, mode, size_in_header);
if (ext_header.len > 0) {
write_extended_header(args, oid, ext_header.buf,
ext_header.len);
}
strbuf_release(&ext_header);
write_blocked(&header, sizeof(header));
if (S_ISREG(mode) && size > 0) {
if (buffer)
write_blocked(buffer, size);
else
err = stream_blocked(oid);
}
free(buffer);
return err;
}
static void write_global_extended_header(struct archiver_args *args)
{
const unsigned char *sha1 = args->commit_sha1;
struct strbuf ext_header = STRBUF_INIT;
struct ustar_header header;
unsigned int mode;
archive-tar: write extended headers for far-future mtime The ustar format represents timestamps as seconds since the epoch, but only has room to store 11 octal digits. To express anything larger, we need to use an extended header. This is exactly the same case we fixed for the size field in the previous commit, and the solution here follows the same pattern. This is even mentioned as an issue in f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), but since it only affected things far in the future, it wasn't deemed worth dealing with. But note that my calculations claiming thousands of years were off there; because our xsnprintf produces a NUL byte, we only have until the year 2242 to fix this. Given that this is just around the corner (geologically speaking, anyway), and because it's easy to fix, let's just make it work. Unlike the previous fix for "size", where we had to write an individual extended header for each file, we can write one global header (since we have only one mtime for the whole archive). There's a slight bit of trickiness there. We may already be writing a global header with a "comment" field for the commit sha1. So we need to write our new field into the same header. To do this, we push the decision of whether to write such a header down into write_global_extended_header(), which will now assemble the header as it sees fit, and will return early if we have nothing to write (in practice, we'll only have a large mtime if it comes from a commit, but this makes it also work if you set your system clock ahead such that time() returns a huge value). Note that we don't (and never did) handle negative timestamps (i.e., before 1970). This would probably not be too hard to support in the same way, but since git does not support negative timestamps at all, I didn't bother here. After writing the extended header, we munge the timestamp in the ustar headers to the maximum-allowable size. This is wrong, but it's the least-wrong thing we can provide to a tar implementation that doesn't understand pax headers (it's also what GNU tar does). Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:20 +08:00
if (sha1)
strbuf_append_ext_header(&ext_header, "comment",
sha1_to_hex(sha1), 40);
if (args->time > USTAR_MAX_MTIME) {
strbuf_append_ext_header_uint(&ext_header, "mtime",
args->time);
args->time = USTAR_MAX_MTIME;
}
if (!ext_header.len)
return;
archive-tar: write extended headers for far-future mtime The ustar format represents timestamps as seconds since the epoch, but only has room to store 11 octal digits. To express anything larger, we need to use an extended header. This is exactly the same case we fixed for the size field in the previous commit, and the solution here follows the same pattern. This is even mentioned as an issue in f2f0267 (archive-tar: use xsnprintf for trivial formatting, 2015-09-24), but since it only affected things far in the future, it wasn't deemed worth dealing with. But note that my calculations claiming thousands of years were off there; because our xsnprintf produces a NUL byte, we only have until the year 2242 to fix this. Given that this is just around the corner (geologically speaking, anyway), and because it's easy to fix, let's just make it work. Unlike the previous fix for "size", where we had to write an individual extended header for each file, we can write one global header (since we have only one mtime for the whole archive). There's a slight bit of trickiness there. We may already be writing a global header with a "comment" field for the commit sha1. So we need to write our new field into the same header. To do this, we push the decision of whether to write such a header down into write_global_extended_header(), which will now assemble the header as it sees fit, and will return early if we have nothing to write (in practice, we'll only have a large mtime if it comes from a commit, but this makes it also work if you set your system clock ahead such that time() returns a huge value). Note that we don't (and never did) handle negative timestamps (i.e., before 1970). This would probably not be too hard to support in the same way, but since git does not support negative timestamps at all, I didn't bother here. After writing the extended header, we munge the timestamp in the ustar headers to the maximum-allowable size. This is wrong, but it's the least-wrong thing we can provide to a tar implementation that doesn't understand pax headers (it's also what GNU tar does). Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 17:09:20 +08:00
memset(&header, 0, sizeof(header));
*header.typeflag = TYPEFLAG_GLOBAL_HEADER;
mode = 0100666;
xsnprintf(header.name, sizeof(header.name), "pax_global_header");
prepare_header(args, &header, mode, ext_header.len);
write_blocked(&header, sizeof(header));
write_blocked(ext_header.buf, ext_header.len);
strbuf_release(&ext_header);
}
static struct archiver **tar_filters;
static int nr_tar_filters;
static int alloc_tar_filters;
static struct archiver *find_tar_filter(const char *name, int len)
{
int i;
for (i = 0; i < nr_tar_filters; i++) {
struct archiver *ar = tar_filters[i];
if (!strncmp(ar->name, name, len) && !ar->name[len])
return ar;
}
return NULL;
}
static int tar_filter_config(const char *var, const char *value, void *data)
{
struct archiver *ar;
const char *name;
const char *type;
int namelen;
if (parse_config_key(var, "tar", &name, &namelen, &type) < 0 || !name)
return 0;
ar = find_tar_filter(name, namelen);
if (!ar) {
ar = xcalloc(1, sizeof(*ar));
ar->name = xmemdupz(name, namelen);
ar->write_archive = write_tar_filter_archive;
ar->flags = ARCHIVER_WANT_COMPRESSION_LEVELS;
ALLOC_GROW(tar_filters, nr_tar_filters + 1, alloc_tar_filters);
tar_filters[nr_tar_filters++] = ar;
}
if (!strcmp(type, "command")) {
if (!value)
return config_error_nonbool(var);
free(ar->data);
ar->data = xstrdup(value);
return 0;
}
if (!strcmp(type, "remote")) {
if (git_config_bool(var, value))
ar->flags |= ARCHIVER_REMOTE;
else
ar->flags &= ~ARCHIVER_REMOTE;
return 0;
}
return 0;
}
static int git_tar_config(const char *var, const char *value, void *cb)
{
if (!strcmp(var, "tar.umask")) {
if (value && !strcmp(value, "user")) {
tar_umask = umask(0);
umask(tar_umask);
} else {
tar_umask = git_config_int(var, value);
}
return 0;
}
return tar_filter_config(var, value, cb);
}
static int write_tar_archive(const struct archiver *ar,
struct archiver_args *args)
{
int err = 0;
write_global_extended_header(args);
err = write_archive_entries(args, write_tar_entry);
if (!err)
write_trailer();
return err;
}
static int write_tar_filter_archive(const struct archiver *ar,
struct archiver_args *args)
{
struct strbuf cmd = STRBUF_INIT;
struct child_process filter = CHILD_PROCESS_INIT;
const char *argv[2];
int r;
if (!ar->data)
die("BUG: tar-filter archiver called with no filter defined");
strbuf_addstr(&cmd, ar->data);
if (args->compression_level >= 0)
strbuf_addf(&cmd, " -%d", args->compression_level);
argv[0] = cmd.buf;
argv[1] = NULL;
filter.argv = argv;
filter.use_shell = 1;
filter.in = -1;
if (start_command(&filter) < 0)
die_errno("unable to start '%s' filter", argv[0]);
close(1);
if (dup2(filter.in, 1) < 0)
die_errno("unable to redirect descriptor");
close(filter.in);
r = write_tar_archive(ar, args);
close(1);
if (finish_command(&filter) != 0)
die("'%s' filter reported error", argv[0]);
strbuf_release(&cmd);
return r;
}
static struct archiver tar_archiver = {
"tar",
write_tar_archive,
ARCHIVER_REMOTE
};
void init_tar_archiver(void)
{
int i;
register_archiver(&tar_archiver);
tar_filter_config("tar.tgz.command", "gzip -cn", NULL);
tar_filter_config("tar.tgz.remote", "true", NULL);
tar_filter_config("tar.tar.gz.command", "gzip -cn", NULL);
tar_filter_config("tar.tar.gz.remote", "true", NULL);
git_config(git_tar_config, NULL);
for (i = 0; i < nr_tar_filters; i++) {
/* omit any filters that never had a command configured */
if (tar_filters[i]->data)
register_archiver(tar_filters[i]);
}
}