git/shallow.c

748 lines
19 KiB
C
Raw Normal View History

#include "cache.h"
#include "tempfile.h"
#include "lockfile.h"
#include "commit.h"
#include "tag.h"
#include "pkt-line.h"
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
#include "remote.h"
#include "refs.h"
#include "sha1-array.h"
#include "diff.h"
#include "revision.h"
#include "commit-slab.h"
shallow.c: implement a generic shallow boundary finder based on rev-list Instead of a custom commit walker like get_shallow_commits(), this new function uses rev-list to mark NOT_SHALLOW to all reachable commits, except borders. The definition of reachable is to be defined by the protocol later. This makes it more flexible to define shallow boundary. The way we find border is paint all reachable commits NOT_SHALLOW. Any of them that "touches" commits without NOT_SHALLOW flag are considered shallow (e.g. zero parents via grafting mechanism). Shallow commits and their true parents are all marked SHALLOW. Then NOT_SHALLOW is removed from shallow commits at the end. There is an interesting observation. With a generic walker, we can produce all kinds of shallow cutting. In the following graph, every commit but "x" is reachable. "b" is a parent of "a". x -- a -- o / / x -- c -- b -- o After this function is run, "a" and "c" are both considered shallow commits. After grafting occurs at the client side, what we see is a -- o / c -- b -- o Notice that because of grafting, "a" has zero parents, so "b" is no longer a parent of "a". This is unfortunate and may be solved in two ways. The first is change the way shallow grafting works and keep "a -- b" connection if "b" exists and always ends at shallow commits (iow, no loose ends). This is hard to detect, or at least not cheap to do. The second way is mark one "x" as shallow commit instead of "a" and produce this graph at client side: x -- a -- o / / c -- b -- o More commits, but simpler grafting rules. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-12 18:53:57 +08:00
#include "revision.h"
#include "list-objects.h"
static int is_shallow = -1;
static struct stat_validity shallow_stat;
static char *alternate_shallow_file;
void set_alternate_shallow_file(const char *path, int override)
{
if (is_shallow != -1)
die("BUG: is_repository_shallow must not be called before set_alternate_shallow_file");
if (alternate_shallow_file && !override)
return;
free(alternate_shallow_file);
alternate_shallow_file = xstrdup_or_null(path);
}
int register_shallow(const struct object_id *oid)
{
struct commit_graft *graft =
xmalloc(sizeof(struct commit_graft));
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
struct commit *commit = lookup_commit(oid);
oidcpy(&graft->oid, oid);
graft->nr_parent = -1;
if (commit && commit->object.parsed)
commit->parents = NULL;
return register_commit_graft(graft, 0);
}
int is_repository_shallow(void)
{
FILE *fp;
char buf[1024];
const char *path = alternate_shallow_file;
if (is_shallow >= 0)
return is_shallow;
if (!path)
memoize common git-path "constant" files One of the most common uses of git_path() is to pass a constant, like git_path("MERGE_MSG"). This has two drawbacks: 1. The return value is a static buffer, and the lifetime is dependent on other calls to git_path, etc. 2. There's no compile-time checking of the pathname. This is OK for a one-off (after all, we have to spell it correctly at least once), but many of these constant strings appear throughout the code. This patch introduces a series of functions to "memoize" these strings, which are essentially globals for the lifetime of the program. We compute the value once, take ownership of the buffer, and return the cached value for subsequent calls. cache.h provides a helper macro for defining these functions as one-liners, and defines a few common ones for global use. Using a macro is a little bit gross, but it does nicely document the purpose of the functions. If we need to touch them all later (e.g., because we learned how to change the git_dir variable at runtime, and need to invalidate all of the stored values), it will be much easier to have the complete list. Note that the shared-global functions have separate, manual declarations. We could do something clever with the macros (e.g., expand it to a declaration in some places, and a declaration _and_ a definition in path.c). But there aren't that many, and it's probably better to stay away from too-magical macros. Likewise, if we abandon the C preprocessor in favor of generating these with a script, we could get much fancier. E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz". But the small amount of saved typing is probably not worth the resulting confusion to readers who want to grep for the function's definition. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-10 17:38:57 +08:00
path = git_path_shallow();
/*
* fetch-pack sets '--shallow-file ""' as an indicator that no
* shallow file should be used. We could just open it and it
* will likely fail. But let's do an explicit check instead.
*/
if (!*path || (fp = fopen(path, "r")) == NULL) {
stat_validity_clear(&shallow_stat);
is_shallow = 0;
return is_shallow;
}
stat_validity_update(&shallow_stat, fileno(fp));
is_shallow = 1;
while (fgets(buf, sizeof(buf), fp)) {
struct object_id oid;
if (get_oid_hex(buf, &oid))
die("bad shallow line: %s", buf);
register_shallow(&oid);
}
fclose(fp);
return is_shallow;
}
struct commit_list *get_shallow_commits(struct object_array *heads, int depth,
int shallow_flag, int not_shallow_flag)
{
int i = 0, cur_depth = 0;
struct commit_list *result = NULL;
struct object_array stack = OBJECT_ARRAY_INIT;
struct commit *commit = NULL;
struct commit_graft *graft;
while (commit || i < heads->nr || stack.nr) {
struct commit_list *p;
if (!commit) {
if (i < heads->nr) {
commit = (struct commit *)
deref_tag(heads->objects[i++].item, NULL, 0);
if (!commit || commit->object.type != OBJ_COMMIT) {
commit = NULL;
continue;
}
if (!commit->util)
commit->util = xmalloc(sizeof(int));
*(int *)commit->util = 0;
cur_depth = 0;
} else {
commit = (struct commit *)
stack.objects[--stack.nr].item;
cur_depth = *(int *)commit->util;
}
}
parse_commit_or_die(commit);
cur_depth++;
if ((depth != INFINITE_DEPTH && cur_depth >= depth) ||
(is_repository_shallow() && !commit->parents &&
(graft = lookup_commit_graft(commit->object.oid.hash)) != NULL &&
graft->nr_parent < 0)) {
commit_list_insert(commit, &result);
commit->object.flags |= shallow_flag;
commit = NULL;
continue;
}
commit->object.flags |= not_shallow_flag;
for (p = commit->parents, commit = NULL; p; p = p->next) {
if (!p->item->util) {
int *pointer = xmalloc(sizeof(int));
p->item->util = pointer;
*pointer = cur_depth;
} else {
int *pointer = p->item->util;
if (cur_depth >= *pointer)
continue;
*pointer = cur_depth;
}
if (p->next)
add_object_array(&p->item->object,
NULL, &stack);
else {
commit = p->item;
cur_depth = *(int *)commit->util;
}
}
}
return result;
}
shallow.c: implement a generic shallow boundary finder based on rev-list Instead of a custom commit walker like get_shallow_commits(), this new function uses rev-list to mark NOT_SHALLOW to all reachable commits, except borders. The definition of reachable is to be defined by the protocol later. This makes it more flexible to define shallow boundary. The way we find border is paint all reachable commits NOT_SHALLOW. Any of them that "touches" commits without NOT_SHALLOW flag are considered shallow (e.g. zero parents via grafting mechanism). Shallow commits and their true parents are all marked SHALLOW. Then NOT_SHALLOW is removed from shallow commits at the end. There is an interesting observation. With a generic walker, we can produce all kinds of shallow cutting. In the following graph, every commit but "x" is reachable. "b" is a parent of "a". x -- a -- o / / x -- c -- b -- o After this function is run, "a" and "c" are both considered shallow commits. After grafting occurs at the client side, what we see is a -- o / c -- b -- o Notice that because of grafting, "a" has zero parents, so "b" is no longer a parent of "a". This is unfortunate and may be solved in two ways. The first is change the way shallow grafting works and keep "a -- b" connection if "b" exists and always ends at shallow commits (iow, no loose ends). This is hard to detect, or at least not cheap to do. The second way is mark one "x" as shallow commit instead of "a" and produce this graph at client side: x -- a -- o / / c -- b -- o More commits, but simpler grafting rules. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-12 18:53:57 +08:00
static void show_commit(struct commit *commit, void *data)
{
commit_list_insert(commit, data);
}
/*
* Given rev-list arguments, run rev-list. All reachable commits
* except border ones are marked with not_shallow_flag. Border commits
* are marked with shallow_flag. The list of border/shallow commits
* are also returned.
*/
struct commit_list *get_shallow_commits_by_rev_list(int ac, const char **av,
int shallow_flag,
int not_shallow_flag)
{
struct commit_list *result = NULL, *p;
struct commit_list *not_shallow_list = NULL;
struct rev_info revs;
int both_flags = shallow_flag | not_shallow_flag;
/*
* SHALLOW (excluded) and NOT_SHALLOW (included) should not be
* set at this point. But better be safe than sorry.
*/
clear_object_flags(both_flags);
is_repository_shallow(); /* make sure shallows are read */
init_revisions(&revs, NULL);
save_commit_buffer = 0;
setup_revisions(ac, av, &revs, NULL);
if (prepare_revision_walk(&revs))
die("revision walk setup failed");
traverse_commit_list(&revs, show_commit, NULL, &not_shallow_list);
/* Mark all reachable commits as NOT_SHALLOW */
for (p = not_shallow_list; p; p = p->next)
p->item->object.flags |= not_shallow_flag;
/*
* mark border commits SHALLOW + NOT_SHALLOW.
* We cannot clear NOT_SHALLOW right now. Imagine border
* commit A is processed first, then commit B, whose parent is
* A, later. If NOT_SHALLOW on A is cleared at step 1, B
* itself is considered border at step 2, which is incorrect.
*/
for (p = not_shallow_list; p; p = p->next) {
struct commit *c = p->item;
struct commit_list *parent;
if (parse_commit(c))
die("unable to parse commit %s",
oid_to_hex(&c->object.oid));
for (parent = c->parents; parent; parent = parent->next)
if (!(parent->item->object.flags & not_shallow_flag)) {
c->object.flags |= shallow_flag;
commit_list_insert(c, &result);
break;
}
}
free_commit_list(not_shallow_list);
/*
* Now we can clean up NOT_SHALLOW on border commits. Having
* both flags set can confuse the caller.
*/
for (p = result; p; p = p->next) {
struct object *o = &p->item->object;
if ((o->flags & both_flags) == both_flags)
o->flags &= ~not_shallow_flag;
}
return result;
}
static void check_shallow_file_for_update(void)
{
if (is_shallow == -1)
die("BUG: shallow must be initialized by now");
memoize common git-path "constant" files One of the most common uses of git_path() is to pass a constant, like git_path("MERGE_MSG"). This has two drawbacks: 1. The return value is a static buffer, and the lifetime is dependent on other calls to git_path, etc. 2. There's no compile-time checking of the pathname. This is OK for a one-off (after all, we have to spell it correctly at least once), but many of these constant strings appear throughout the code. This patch introduces a series of functions to "memoize" these strings, which are essentially globals for the lifetime of the program. We compute the value once, take ownership of the buffer, and return the cached value for subsequent calls. cache.h provides a helper macro for defining these functions as one-liners, and defines a few common ones for global use. Using a macro is a little bit gross, but it does nicely document the purpose of the functions. If we need to touch them all later (e.g., because we learned how to change the git_dir variable at runtime, and need to invalidate all of the stored values), it will be much easier to have the complete list. Note that the shared-global functions have separate, manual declarations. We could do something clever with the macros (e.g., expand it to a declaration in some places, and a declaration _and_ a definition in path.c). But there aren't that many, and it's probably better to stay away from too-magical macros. Likewise, if we abandon the C preprocessor in favor of generating these with a script, we could get much fancier. E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz". But the small amount of saved typing is probably not worth the resulting confusion to readers who want to grep for the function's definition. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-10 17:38:57 +08:00
if (!stat_validity_check(&shallow_stat, git_path_shallow()))
die("shallow file has changed since we read it");
}
#define SEEN_ONLY 1
#define VERBOSE 2
struct write_shallow_data {
struct strbuf *out;
int use_pack_protocol;
int count;
unsigned flags;
};
static int write_one_shallow(const struct commit_graft *graft, void *cb_data)
{
struct write_shallow_data *data = cb_data;
const char *hex = oid_to_hex(&graft->oid);
if (graft->nr_parent != -1)
return 0;
if (data->flags & SEEN_ONLY) {
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
struct commit *c = lookup_commit(&graft->oid);
if (!c || !(c->object.flags & SEEN)) {
if (data->flags & VERBOSE)
printf("Removing %s from .git/shallow\n",
oid_to_hex(&c->object.oid));
return 0;
}
}
data->count++;
if (data->use_pack_protocol)
packet_buf_write(data->out, "shallow %s", hex);
else {
strbuf_addstr(data->out, hex);
strbuf_addch(data->out, '\n');
}
return 0;
}
static int write_shallow_commits_1(struct strbuf *out, int use_pack_protocol,
const struct oid_array *extra,
unsigned flags)
{
struct write_shallow_data data;
int i;
data.out = out;
data.use_pack_protocol = use_pack_protocol;
data.count = 0;
data.flags = flags;
for_each_commit_graft(write_one_shallow, &data);
if (!extra)
return data.count;
for (i = 0; i < extra->nr; i++) {
strbuf_addstr(out, oid_to_hex(extra->oid + i));
strbuf_addch(out, '\n');
data.count++;
}
return data.count;
}
int write_shallow_commits(struct strbuf *out, int use_pack_protocol,
const struct oid_array *extra)
{
return write_shallow_commits_1(out, use_pack_protocol, extra, 0);
}
static struct tempfile temporary_shallow;
const char *setup_temporary_shallow(const struct oid_array *extra)
{
struct strbuf sb = STRBUF_INIT;
int fd;
if (write_shallow_commits(&sb, 0, extra)) {
fd = xmks_tempfile(&temporary_shallow, git_path("shallow_XXXXXX"));
if (write_in_full(fd, sb.buf, sb.len) != sb.len)
die_errno("failed to write to %s",
get_tempfile_path(&temporary_shallow));
close_tempfile(&temporary_shallow);
strbuf_release(&sb);
return get_tempfile_path(&temporary_shallow);
}
/*
* is_repository_shallow() sees empty string as "no shallow
* file".
*/
return get_tempfile_path(&temporary_shallow);
}
void setup_alternate_shallow(struct lock_file *shallow_lock,
const char **alternate_shallow_file,
const struct oid_array *extra)
{
struct strbuf sb = STRBUF_INIT;
int fd;
memoize common git-path "constant" files One of the most common uses of git_path() is to pass a constant, like git_path("MERGE_MSG"). This has two drawbacks: 1. The return value is a static buffer, and the lifetime is dependent on other calls to git_path, etc. 2. There's no compile-time checking of the pathname. This is OK for a one-off (after all, we have to spell it correctly at least once), but many of these constant strings appear throughout the code. This patch introduces a series of functions to "memoize" these strings, which are essentially globals for the lifetime of the program. We compute the value once, take ownership of the buffer, and return the cached value for subsequent calls. cache.h provides a helper macro for defining these functions as one-liners, and defines a few common ones for global use. Using a macro is a little bit gross, but it does nicely document the purpose of the functions. If we need to touch them all later (e.g., because we learned how to change the git_dir variable at runtime, and need to invalidate all of the stored values), it will be much easier to have the complete list. Note that the shared-global functions have separate, manual declarations. We could do something clever with the macros (e.g., expand it to a declaration in some places, and a declaration _and_ a definition in path.c). But there aren't that many, and it's probably better to stay away from too-magical macros. Likewise, if we abandon the C preprocessor in favor of generating these with a script, we could get much fancier. E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz". But the small amount of saved typing is probably not worth the resulting confusion to readers who want to grep for the function's definition. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-10 17:38:57 +08:00
fd = hold_lock_file_for_update(shallow_lock, git_path_shallow(),
LOCK_DIE_ON_ERROR);
check_shallow_file_for_update();
if (write_shallow_commits(&sb, 0, extra)) {
if (write_in_full(fd, sb.buf, sb.len) != sb.len)
die_errno("failed to write to %s",
get_lock_file_path(shallow_lock));
*alternate_shallow_file = get_lock_file_path(shallow_lock);
} else
/*
* is_repository_shallow() sees empty string as "no
* shallow file".
*/
*alternate_shallow_file = "";
strbuf_release(&sb);
}
make the sender advertise shallow commits to the receiver If either receive-pack or upload-pack is called on a shallow repository, shallow commits (*) will be sent after the ref advertisement (but before the packet flush), so that the receiver has the full "shape" of the sender's commit graph. This will be needed for the receiver to update its .git/shallow if necessary. This breaks the protocol for all clients trying to push to a shallow repo, or fetch from one. Which is basically the same end result as today's "is_repository_shallow() && die()" in receive-pack and upload-pack. New clients will be made aware of shallow upstream and can make use of this information. The sender must send all shallow commits that are sent in the following pack. It may send more shallow commits than necessary. upload-pack for example may choose to advertise no shallow commits if it knows in advance that the pack it's going to send contains no shallow commits. But upload-pack is the server, so we choose the cheaper way, send full .git/shallow and let the client deal with it. Smart HTTP is not affected by this patch. Shallow support on smart-http comes later separately. (*) A shallow commit is a commit that terminates the revision walker. It is usually put in .git/shallow in order to keep the revision walker from going out of bound because there is no guarantee that objects behind this commit is available. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:32 +08:00
static int advertise_shallow_grafts_cb(const struct commit_graft *graft, void *cb)
{
int fd = *(int *)cb;
if (graft->nr_parent == -1)
packet_write_fmt(fd, "shallow %s\n", oid_to_hex(&graft->oid));
make the sender advertise shallow commits to the receiver If either receive-pack or upload-pack is called on a shallow repository, shallow commits (*) will be sent after the ref advertisement (but before the packet flush), so that the receiver has the full "shape" of the sender's commit graph. This will be needed for the receiver to update its .git/shallow if necessary. This breaks the protocol for all clients trying to push to a shallow repo, or fetch from one. Which is basically the same end result as today's "is_repository_shallow() && die()" in receive-pack and upload-pack. New clients will be made aware of shallow upstream and can make use of this information. The sender must send all shallow commits that are sent in the following pack. It may send more shallow commits than necessary. upload-pack for example may choose to advertise no shallow commits if it knows in advance that the pack it's going to send contains no shallow commits. But upload-pack is the server, so we choose the cheaper way, send full .git/shallow and let the client deal with it. Smart HTTP is not affected by this patch. Shallow support on smart-http comes later separately. (*) A shallow commit is a commit that terminates the revision walker. It is usually put in .git/shallow in order to keep the revision walker from going out of bound because there is no guarantee that objects behind this commit is available. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:32 +08:00
return 0;
}
void advertise_shallow_grafts(int fd)
{
if (!is_repository_shallow())
return;
for_each_commit_graft(advertise_shallow_grafts_cb, &fd);
}
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
/*
* mark_reachable_objects() should have been run prior to this and all
* reachable commits marked as "SEEN".
*/
void prune_shallow(int show_only)
{
static struct lock_file shallow_lock;
struct strbuf sb = STRBUF_INIT;
int fd;
if (show_only) {
write_shallow_commits_1(&sb, 0, NULL, SEEN_ONLY | VERBOSE);
strbuf_release(&sb);
return;
}
memoize common git-path "constant" files One of the most common uses of git_path() is to pass a constant, like git_path("MERGE_MSG"). This has two drawbacks: 1. The return value is a static buffer, and the lifetime is dependent on other calls to git_path, etc. 2. There's no compile-time checking of the pathname. This is OK for a one-off (after all, we have to spell it correctly at least once), but many of these constant strings appear throughout the code. This patch introduces a series of functions to "memoize" these strings, which are essentially globals for the lifetime of the program. We compute the value once, take ownership of the buffer, and return the cached value for subsequent calls. cache.h provides a helper macro for defining these functions as one-liners, and defines a few common ones for global use. Using a macro is a little bit gross, but it does nicely document the purpose of the functions. If we need to touch them all later (e.g., because we learned how to change the git_dir variable at runtime, and need to invalidate all of the stored values), it will be much easier to have the complete list. Note that the shared-global functions have separate, manual declarations. We could do something clever with the macros (e.g., expand it to a declaration in some places, and a declaration _and_ a definition in path.c). But there aren't that many, and it's probably better to stay away from too-magical macros. Likewise, if we abandon the C preprocessor in favor of generating these with a script, we could get much fancier. E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz". But the small amount of saved typing is probably not worth the resulting confusion to readers who want to grep for the function's definition. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-10 17:38:57 +08:00
fd = hold_lock_file_for_update(&shallow_lock, git_path_shallow(),
LOCK_DIE_ON_ERROR);
check_shallow_file_for_update();
if (write_shallow_commits_1(&sb, 0, NULL, SEEN_ONLY)) {
if (write_in_full(fd, sb.buf, sb.len) != sb.len)
die_errno("failed to write to %s",
get_lock_file_path(&shallow_lock));
commit_lock_file(&shallow_lock);
} else {
memoize common git-path "constant" files One of the most common uses of git_path() is to pass a constant, like git_path("MERGE_MSG"). This has two drawbacks: 1. The return value is a static buffer, and the lifetime is dependent on other calls to git_path, etc. 2. There's no compile-time checking of the pathname. This is OK for a one-off (after all, we have to spell it correctly at least once), but many of these constant strings appear throughout the code. This patch introduces a series of functions to "memoize" these strings, which are essentially globals for the lifetime of the program. We compute the value once, take ownership of the buffer, and return the cached value for subsequent calls. cache.h provides a helper macro for defining these functions as one-liners, and defines a few common ones for global use. Using a macro is a little bit gross, but it does nicely document the purpose of the functions. If we need to touch them all later (e.g., because we learned how to change the git_dir variable at runtime, and need to invalidate all of the stored values), it will be much easier to have the complete list. Note that the shared-global functions have separate, manual declarations. We could do something clever with the macros (e.g., expand it to a declaration in some places, and a declaration _and_ a definition in path.c). But there aren't that many, and it's probably better to stay away from too-magical macros. Likewise, if we abandon the C preprocessor in favor of generating these with a script, we could get much fancier. E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz". But the small amount of saved typing is probably not worth the resulting confusion to readers who want to grep for the function's definition. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-10 17:38:57 +08:00
unlink(git_path_shallow());
rollback_lock_file(&shallow_lock);
}
strbuf_release(&sb);
}
struct trace_key trace_shallow = TRACE_KEY_INIT(SHALLOW);
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
/*
* Step 1, split sender shallow commits into "ours" and "theirs"
* Step 2, clean "ours" based on .git/shallow
*/
void prepare_shallow_info(struct shallow_info *info, struct oid_array *sa)
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
{
int i;
trace_printf_key(&trace_shallow, "shallow: prepare_shallow_info\n");
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
memset(info, 0, sizeof(*info));
info->shallow = sa;
if (!sa)
return;
ALLOC_ARRAY(info->ours, sa->nr);
ALLOC_ARRAY(info->theirs, sa->nr);
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
for (i = 0; i < sa->nr; i++) {
if (has_object_file(sa->oid + i)) {
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
struct commit_graft *graft;
graft = lookup_commit_graft(sa->oid[i].hash);
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
if (graft && graft->nr_parent < 0)
continue;
info->ours[info->nr_ours++] = i;
} else
info->theirs[info->nr_theirs++] = i;
}
}
void clear_shallow_info(struct shallow_info *info)
{
free(info->ours);
free(info->theirs);
}
/* Step 4, remove non-existent ones in "theirs" after getting the pack */
void remove_nonexistent_theirs_shallow(struct shallow_info *info)
{
struct object_id *oid = info->shallow->oid;
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
int i, dst;
trace_printf_key(&trace_shallow, "shallow: remove_nonexistent_theirs_shallow\n");
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
for (i = dst = 0; i < info->nr_theirs; i++) {
if (i != dst)
info->theirs[dst] = info->theirs[i];
if (has_object_file(oid + info->theirs[i]))
shallow.c: the 8 steps to select new commits for .git/shallow Suppose a fetch or push is requested between two shallow repositories (with no history deepening or shortening). A pack that contains necessary objects is transferred over together with .git/shallow of the sender. The receiver has to determine whether it needs to update .git/shallow if new refs needs new shallow comits. The rule here is avoid updating .git/shallow by default. But we don't want to waste the received pack. If the pack contains two refs, one needs new shallow commits installed in .git/shallow and one does not, we keep the latter and reject/warn about the former. Even if .git/shallow update is allowed, we only add shallow commits strictly necessary for the former ref (remember the sender can send more shallow commits than necessary) and pay attention not to accidentally cut the receiver history short (no history shortening is asked for) So the steps to figure out what ref need what new shallow commits are: 1. Split the sender shallow commit list into "ours" and "theirs" list by has_sha1_file. Those that exist in current repo in "ours", the remaining in "theirs". 2. Check the receiver .git/shallow, remove from "ours" the ones that also exist in .git/shallow. 3. Fetch the new pack. Either install or unpack it. 4. Do has_sha1_file on "theirs" list again. Drop the ones that fail has_sha1_file. Obviously the new pack does not need them. 5. If the pack is kept, remove from "ours" the ones that do not exist in the new pack. 6. Walk the new refs to answer the question "what shallow commits, both ours and theirs, are required in .git/shallow in order to add this ref?". Shallow commits not associated to any refs are removed from their respective list. 7. (*) Check reachability (from the current refs) of all remaining commits in "ours". Those reachable are removed. We do not want to cut any part of our (reachable) history. We only check up commits. True reachability test is done by check_everything_connected() at the end as usual. 8. Combine the final "ours" and "theirs" and add them all to .git/shallow. Install new refs. The case where some hook rejects some refs on a push is explained in more detail in the push patches. Of these steps, #6 and #7 are expensive. Both require walking through some commits, or in the worst case all commits. And we rather avoid them in at least common case, where the transferred pack does not contain any shallow commits that the sender advertises. Let's look at each scenario: 1) the sender has longer history than the receiver All shallow commits from the sender will be put into "theirs" list at step 1 because none of them exists in current repo. In the common case, "theirs" becomes empty at step 4 and exit early. 2) the sender has shorter history than the receiver All shallow commits from the sender are likely in "ours" list at step 1. In the common case, if the new pack is kept, we could empty "ours" and exit early at step 5. If the pack is not kept, we hit the expensive step 6 then exit after "ours" is emptied. There'll be only a handful of objects to walk in fast-forward case. If it's forced update, we may need to walk to the bottom. 3) the sender has same .git/shallow as the receiver This is similar to case 2 except that "ours" should be emptied at step 2 and exit early. A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from a shallow repo) is case 3. Luckily they're cheap for the common case. A push from "clone --depth=X" falls into case 2, which is expensive. Some more work may be done at the sender/client side to avoid more work on the server side: if the transferred pack does not contain any shallow commits, send-pack should not send any shallow commits to the receive-pack, effectively turning it into a normal push and avoid all steps. This patch implements all steps except #3, already handled by fetch-pack and receive-pack, #6 and #7, which has their own patch due to their size. (*) in previous versions step 7 was put before step 3. I reorder it so that the common case that keeps the pack does not need to walk commits at all. In future if we implement faster commit reachability check (maybe with the help of pack bitmaps or commit cache), step 7 could become cheap and be moved up before 6 again. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 21:02:35 +08:00
dst++;
}
info->nr_theirs = dst;
}
define_commit_slab(ref_bitmap, uint32_t *);
#define POOL_SIZE (512 * 1024)
struct paint_info {
struct ref_bitmap ref_bitmap;
unsigned nr_bits;
char **pools;
char *free, *end;
unsigned pool_count;
};
static uint32_t *paint_alloc(struct paint_info *info)
{
unsigned nr = DIV_ROUND_UP(info->nr_bits, 32);
unsigned size = nr * sizeof(uint32_t);
void *p;
if (!info->pool_count || size > info->end - info->free) {
if (size > POOL_SIZE)
die("BUG: pool size too small for %d in paint_alloc()",
size);
info->pool_count++;
REALLOC_ARRAY(info->pools, info->pool_count);
info->free = xmalloc(POOL_SIZE);
info->pools[info->pool_count - 1] = info->free;
info->end = info->free + POOL_SIZE;
}
p = info->free;
info->free += size;
return p;
}
/*
* Given a commit SHA-1, walk down to parents until either SEEN,
* UNINTERESTING or BOTTOM is hit. Set the id-th bit in ref_bitmap for
* all walked commits.
*/
static void paint_down(struct paint_info *info, const struct object_id *oid,
unsigned int id)
{
unsigned int i, nr;
struct commit_list *head = NULL;
int bitmap_nr = DIV_ROUND_UP(info->nr_bits, 32);
size_t bitmap_size = st_mult(sizeof(uint32_t), bitmap_nr);
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
struct commit *c = lookup_commit_reference_gently(oid, 1);
uint32_t *tmp; /* to be freed before return */
uint32_t *bitmap;
if (!c)
return;
tmp = xmalloc(bitmap_size);
bitmap = paint_alloc(info);
memset(bitmap, 0, bitmap_size);
bitmap[id / 32] |= (1U << (id % 32));
commit_list_insert(c, &head);
while (head) {
struct commit_list *p;
struct commit *c = pop_commit(&head);
uint32_t **refs = ref_bitmap_at(&info->ref_bitmap, c);
/* XXX check "UNINTERESTING" from pack bitmaps if available */
if (c->object.flags & (SEEN | UNINTERESTING))
continue;
else
c->object.flags |= SEEN;
if (*refs == NULL)
*refs = bitmap;
else {
memcpy(tmp, *refs, bitmap_size);
for (i = 0; i < bitmap_nr; i++)
tmp[i] |= bitmap[i];
if (memcmp(tmp, *refs, bitmap_size)) {
*refs = paint_alloc(info);
memcpy(*refs, tmp, bitmap_size);
}
}
if (c->object.flags & BOTTOM)
continue;
if (parse_commit(c))
die("unable to parse commit %s",
oid_to_hex(&c->object.oid));
for (p = c->parents; p; p = p->next) {
if (p->item->object.flags & SEEN)
continue;
commit_list_insert(p->item, &head);
}
}
nr = get_max_object_index();
for (i = 0; i < nr; i++) {
struct object *o = get_indexed_object(i);
if (o && o->type == OBJ_COMMIT)
o->flags &= ~SEEN;
}
free(tmp);
}
static int mark_uninteresting(const char *refname, const struct object_id *oid,
int flags, void *cb_data)
{
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
struct commit *commit = lookup_commit_reference_gently(oid, 1);
if (!commit)
return 0;
commit->object.flags |= UNINTERESTING;
mark_parents_uninteresting(commit);
return 0;
}
static void post_assign_shallow(struct shallow_info *info,
struct ref_bitmap *ref_bitmap,
int *ref_status);
/*
* Step 6(+7), associate shallow commits with new refs
*
* info->ref must be initialized before calling this function.
*
* If used is not NULL, it's an array of info->shallow->nr
* bitmaps. The n-th bit set in the m-th bitmap if ref[n] needs the
* m-th shallow commit from info->shallow.
*
* If used is NULL, "ours" and "theirs" are updated. And if ref_status
* is not NULL it's an array of ref->nr ints. ref_status[i] is true if
* the ref needs some shallow commits from either info->ours or
* info->theirs.
*/
void assign_shallow_commits_to_refs(struct shallow_info *info,
uint32_t **used, int *ref_status)
{
struct object_id *oid = info->shallow->oid;
struct oid_array *ref = info->ref;
unsigned int i, nr;
int *shallow, nr_shallow = 0;
struct paint_info pi;
trace_printf_key(&trace_shallow, "shallow: assign_shallow_commits_to_refs\n");
ALLOC_ARRAY(shallow, info->nr_ours + info->nr_theirs);
for (i = 0; i < info->nr_ours; i++)
shallow[nr_shallow++] = info->ours[i];
for (i = 0; i < info->nr_theirs; i++)
shallow[nr_shallow++] = info->theirs[i];
/*
* Prepare the commit graph to track what refs can reach what
* (new) shallow commits.
*/
nr = get_max_object_index();
for (i = 0; i < nr; i++) {
struct object *o = get_indexed_object(i);
if (!o || o->type != OBJ_COMMIT)
continue;
o->flags &= ~(UNINTERESTING | BOTTOM | SEEN);
}
memset(&pi, 0, sizeof(pi));
init_ref_bitmap(&pi.ref_bitmap);
pi.nr_bits = ref->nr;
/*
* "--not --all" to cut short the traversal if new refs
* connect to old refs. If not (e.g. force ref updates) it'll
* have to go down to the current shallow commits.
*/
head_ref(mark_uninteresting, NULL);
for_each_ref(mark_uninteresting, NULL);
/* Mark potential bottoms so we won't go out of bound */
for (i = 0; i < nr_shallow; i++) {
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
struct commit *c = lookup_commit(&oid[shallow[i]]);
c->object.flags |= BOTTOM;
}
for (i = 0; i < ref->nr; i++)
paint_down(&pi, ref->oid + i, i);
if (used) {
int bitmap_size = DIV_ROUND_UP(pi.nr_bits, 32) * sizeof(uint32_t);
memset(used, 0, sizeof(*used) * info->shallow->nr);
for (i = 0; i < nr_shallow; i++) {
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
const struct commit *c = lookup_commit(&oid[shallow[i]]);
uint32_t **map = ref_bitmap_at(&pi.ref_bitmap, c);
if (*map)
used[shallow[i]] = xmemdupz(*map, bitmap_size);
}
/*
* unreachable shallow commits are not removed from
* "ours" and "theirs". The user is supposed to run
* step 7 on every ref separately and not trust "ours"
* and "theirs" any more.
*/
} else
post_assign_shallow(info, &pi.ref_bitmap, ref_status);
clear_ref_bitmap(&pi.ref_bitmap);
for (i = 0; i < pi.pool_count; i++)
free(pi.pools[i]);
free(pi.pools);
free(shallow);
}
struct commit_array {
struct commit **commits;
int nr, alloc;
};
static int add_ref(const char *refname, const struct object_id *oid,
int flags, void *cb_data)
{
struct commit_array *ca = cb_data;
ALLOC_GROW(ca->commits, ca->nr + 1, ca->alloc);
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
ca->commits[ca->nr] = lookup_commit_reference_gently(oid, 1);
if (ca->commits[ca->nr])
ca->nr++;
return 0;
}
static void update_refstatus(int *ref_status, int nr, uint32_t *bitmap)
{
unsigned int i;
if (!ref_status)
return;
for (i = 0; i < nr; i++)
if (bitmap[i / 32] & (1U << (i % 32)))
ref_status[i]++;
}
/*
* Step 7, reachability test on "ours" at commit level
*/
static void post_assign_shallow(struct shallow_info *info,
struct ref_bitmap *ref_bitmap,
int *ref_status)
{
struct object_id *oid = info->shallow->oid;
struct commit *c;
uint32_t **bitmap;
int dst, i, j;
int bitmap_nr = DIV_ROUND_UP(info->ref->nr, 32);
struct commit_array ca;
trace_printf_key(&trace_shallow, "shallow: post_assign_shallow\n");
if (ref_status)
memset(ref_status, 0, sizeof(*ref_status) * info->ref->nr);
/* Remove unreachable shallow commits from "theirs" */
for (i = dst = 0; i < info->nr_theirs; i++) {
if (i != dst)
info->theirs[dst] = info->theirs[i];
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
c = lookup_commit(&oid[info->theirs[i]]);
bitmap = ref_bitmap_at(ref_bitmap, c);
if (!*bitmap)
continue;
for (j = 0; j < bitmap_nr; j++)
if (bitmap[0][j]) {
update_refstatus(ref_status, info->ref->nr, *bitmap);
dst++;
break;
}
}
info->nr_theirs = dst;
memset(&ca, 0, sizeof(ca));
head_ref(add_ref, &ca);
for_each_ref(add_ref, &ca);
/* Remove unreachable shallow commits from "ours" */
for (i = dst = 0; i < info->nr_ours; i++) {
if (i != dst)
info->ours[dst] = info->ours[i];
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
c = lookup_commit(&oid[info->ours[i]]);
bitmap = ref_bitmap_at(ref_bitmap, c);
if (!*bitmap)
continue;
for (j = 0; j < bitmap_nr; j++)
if (bitmap[0][j] &&
/* Step 7, reachability test at commit level */
!in_merge_bases_many(c, ca.nr, ca.commits)) {
update_refstatus(ref_status, info->ref->nr, *bitmap);
dst++;
break;
}
}
info->nr_ours = dst;
free(ca.commits);
}
/* (Delayed) step 7, reachability test at commit level */
int delayed_reachability_test(struct shallow_info *si, int c)
{
if (si->need_reachability_test[c]) {
Convert lookup_commit* to struct object_id Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-07 06:10:10 +08:00
struct commit *commit = lookup_commit(&si->shallow->oid[c]);
if (!si->commits) {
struct commit_array ca;
memset(&ca, 0, sizeof(ca));
head_ref(add_ref, &ca);
for_each_ref(add_ref, &ca);
si->commits = ca.commits;
si->nr_commits = ca.nr;
}
si->reachable[c] = in_merge_bases_many(commit,
si->nr_commits,
si->commits);
si->need_reachability_test[c] = 0;
}
return si->reachable[c];
}