git/t/t7004-tag.sh

1570 lines
41 KiB
Bash
Raw Normal View History

#!/bin/sh
#
# Copyright (c) 2007 Carlos Rica
#
test_description='git tag
Tests for operations with tags.'
. ./test-lib.sh
. "$TEST_DIRECTORY"/lib-gpg.sh
# creating and listing lightweight tags:
tag_exists () {
git show-ref --quiet --verify refs/tags/"$1"
}
# todo: git tag -l now returns always zero, when fixed, change this test
test_expect_success 'listing all tags in an empty tree should succeed' '
git tag -l &&
git tag
'
test_expect_success 'listing all tags in an empty tree should output nothing' '
test $(git tag -l | wc -l) -eq 0 &&
test $(git tag | wc -l) -eq 0
'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success 'looking for a tag in an empty tree should fail' \
'! (tag_exists mytag)'
test_expect_success 'creating a tag in an empty tree should fail' '
test_must_fail git tag mynotag &&
! tag_exists mynotag
'
test_expect_success 'creating a tag for HEAD in an empty tree should fail' '
test_must_fail git tag mytaghead HEAD &&
! tag_exists mytaghead
'
test_expect_success 'creating a tag for an unknown revision should fail' '
test_must_fail git tag mytagnorev aaaaaaaaaaa &&
! tag_exists mytagnorev
'
# commit used in the tests, test_tick is also called here to freeze the date:
test_expect_success 'creating a tag using default HEAD should succeed' '
test_tick &&
echo foo >foo &&
git add foo &&
git commit -m Foo &&
git tag mytag &&
test_must_fail git reflog exists refs/tags/mytag
'
test_expect_success 'creating a tag with --create-reflog should create reflog' '
test_when_finished "git tag -d tag_with_reflog" &&
git tag --create-reflog tag_with_reflog &&
git reflog exists refs/tags/tag_with_reflog
'
test_expect_success '--create-reflog does not create reflog on failure' '
test_must_fail git tag --create-reflog mytag &&
test_must_fail git reflog exists refs/tags/mytag
'
test_expect_success 'listing all tags if one exists should succeed' '
git tag -l &&
git tag
'
test_expect_success 'listing all tags if one exists should output that tag' '
test $(git tag -l) = mytag &&
test $(git tag) = mytag
'
# pattern matching:
test_expect_success 'listing a tag using a matching pattern should succeed' \
'git tag -l mytag'
test_expect_success \
'listing a tag using a matching pattern should output that tag' \
'test $(git tag -l mytag) = mytag'
# todo: git tag -l now returns always zero, when fixed, change this test
test_expect_success \
'listing tags using a non-matching pattern should suceed' \
'git tag -l xxx'
test_expect_success \
'listing tags using a non-matching pattern should output nothing' \
'test $(git tag -l xxx | wc -l) -eq 0'
# special cases for creating tags:
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
'trying to create a tag with the name of one existing should fail' \
'test_must_fail git tag mytag'
test_expect_success \
'trying to create a tag with a non-valid name should fail' '
test $(git tag -l | wc -l) -eq 1 &&
test_must_fail git tag "" &&
test_must_fail git tag .othertag &&
test_must_fail git tag "other tag" &&
test_must_fail git tag "othertag^" &&
test_must_fail git tag "other~tag" &&
test $(git tag -l | wc -l) -eq 1
'
test_expect_success 'creating a tag using HEAD directly should succeed' '
git tag myhead HEAD &&
tag_exists myhead
'
test_expect_success '--force can create a tag with the name of one existing' '
tag_exists mytag &&
git tag --force mytag &&
tag_exists mytag'
test_expect_success '--force is moot with a non-existing tag name' '
git tag newtag >expect &&
git tag --force forcetag >actual &&
test_cmp expect actual
'
git tag -d newtag forcetag
# deleting tags:
test_expect_success 'trying to delete an unknown tag should fail' '
! tag_exists unknown-tag &&
test_must_fail git tag -d unknown-tag
'
cat >expect <<EOF
myhead
mytag
EOF
test_expect_success \
'trying to delete tags without params should succeed and do nothing' '
git tag -l > actual && test_cmp expect actual &&
git tag -d &&
git tag -l > actual && test_cmp expect actual
'
test_expect_success \
'deleting two existing tags in one command should succeed' '
tag_exists mytag &&
tag_exists myhead &&
git tag -d mytag myhead &&
! tag_exists mytag &&
! tag_exists myhead
'
test_expect_success \
'creating a tag with the name of another deleted one should succeed' '
! tag_exists mytag &&
git tag mytag &&
tag_exists mytag
'
test_expect_success \
'trying to delete two tags, existing and not, should fail in the 2nd' '
tag_exists mytag &&
! tag_exists myhead &&
test_must_fail git tag -d mytag anothertag &&
! tag_exists mytag &&
! tag_exists myhead
'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success 'trying to delete an already deleted tag should fail' \
'test_must_fail git tag -d mytag'
# listing various tags with pattern matching:
cat >expect <<EOF
a1
aa1
cba
t210
t211
v0.2.1
v1.0
v1.0.1
v1.1.3
EOF
test_expect_success 'listing all tags should print them ordered' '
git tag v1.0.1 &&
git tag t211 &&
git tag aa1 &&
git tag v0.2.1 &&
git tag v1.1.3 &&
git tag cba &&
git tag a1 &&
git tag v1.0 &&
git tag t210 &&
git tag -l > actual &&
test_cmp expect actual &&
git tag > actual &&
test_cmp expect actual
'
cat >expect <<EOF
a1
aa1
cba
EOF
test_expect_success \
'listing tags with substring as pattern must print those matching' '
rm *a* &&
git tag -l "*a*" > current &&
test_cmp expect current
'
cat >expect <<EOF
v0.2.1
v1.0.1
EOF
test_expect_success \
'listing tags with a suffix as pattern must print those matching' '
git tag -l "*.1" > actual &&
test_cmp expect actual
'
cat >expect <<EOF
t210
t211
EOF
test_expect_success \
'listing tags with a prefix as pattern must print those matching' '
git tag -l "t21*" > actual &&
test_cmp expect actual
'
cat >expect <<EOF
a1
EOF
test_expect_success \
'listing tags using a name as pattern must print that one matching' '
git tag -l a1 > actual &&
test_cmp expect actual
'
cat >expect <<EOF
v1.0
EOF
test_expect_success \
'listing tags using a name as pattern must print that one matching' '
git tag -l v1.0 > actual &&
test_cmp expect actual
'
cat >expect <<EOF
v1.0.1
v1.1.3
EOF
test_expect_success \
'listing tags with ? in the pattern should print those matching' '
git tag -l "v1.?.?" > actual &&
test_cmp expect actual
'
>expect
test_expect_success \
'listing tags using v.* should print nothing because none have v.' '
git tag -l "v.*" > actual &&
test_cmp expect actual
'
cat >expect <<EOF
v0.2.1
v1.0
v1.0.1
v1.1.3
EOF
test_expect_success \
'listing tags using v* should print only those having v' '
git tag -l "v*" > actual &&
test_cmp expect actual
'
test_expect_success 'tag -l can accept multiple patterns' '
git tag -l "v1*" "v0*" >actual &&
test_cmp expect actual
'
test_expect_success 'listing tags in column' '
COLUMNS=40 git tag -l --column=row >actual &&
cat >expected <<\EOF &&
a1 aa1 cba t210 t211
v0.2.1 v1.0 v1.0.1 v1.1.3
EOF
test_cmp expected actual
'
test_expect_success 'listing tags in column with column.*' '
git config column.tag row &&
git config column.ui dense &&
COLUMNS=40 git tag -l >actual &&
git config --unset column.ui &&
git config --unset column.tag &&
cat >expected <<\EOF &&
a1 aa1 cba t210 t211
v0.2.1 v1.0 v1.0.1 v1.1.3
EOF
test_cmp expected actual
'
test_expect_success 'listing tag with -n --column should fail' '
test_must_fail git tag --column -n
'
test_expect_success 'listing tags -n in column with column.ui ignored' '
git config column.ui "row dense" &&
COLUMNS=40 git tag -l -n >actual &&
git config --unset column.ui &&
cat >expected <<\EOF &&
a1 Foo
aa1 Foo
cba Foo
t210 Foo
t211 Foo
v0.2.1 Foo
v1.0 Foo
v1.0.1 Foo
v1.1.3 Foo
EOF
test_cmp expected actual
'
# creating and verifying lightweight tags:
test_expect_success \
'a non-annotated tag created without parameters should point to HEAD' '
git tag non-annotated-tag &&
test $(git cat-file -t non-annotated-tag) = commit &&
test $(git rev-parse non-annotated-tag) = $(git rev-parse HEAD)
'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success 'trying to verify an unknown tag should fail' \
'test_must_fail git tag -v unknown-tag'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
'trying to verify a non-annotated and non-signed tag should fail' \
'test_must_fail git tag -v non-annotated-tag'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
'trying to verify many non-annotated or unknown tags, should fail' \
'test_must_fail git tag -v unknown-tag1 non-annotated-tag unknown-tag2'
# creating annotated tags:
get_tag_msg () {
git cat-file tag "$1" | sed -e "/BEGIN PGP/q"
}
# run test_tick before committing always gives the time in that timezone
get_tag_header () {
cat <<EOF
object $2
type $3
tag $1
tagger C O Mitter <committer@example.com> $4 -0700
EOF
}
commit=$(git rev-parse HEAD)
time=$test_tick
get_tag_header annotated-tag $commit commit $time >expect
echo "A message" >>expect
test_expect_success \
'creating an annotated tag with -m message should succeed' '
git tag -m "A message" annotated-tag &&
get_tag_msg annotated-tag >actual &&
test_cmp expect actual
'
cat >msgfile <<EOF
Another message
in a file.
EOF
get_tag_header file-annotated-tag $commit commit $time >expect
cat msgfile >>expect
test_expect_success \
'creating an annotated tag with -F messagefile should succeed' '
git tag -F msgfile file-annotated-tag &&
get_tag_msg file-annotated-tag >actual &&
test_cmp expect actual
'
cat >inputmsg <<EOF
A message from the
standard input
EOF
get_tag_header stdin-annotated-tag $commit commit $time >expect
cat inputmsg >>expect
test_expect_success 'creating an annotated tag with -F - should succeed' '
git tag -F - stdin-annotated-tag <inputmsg &&
get_tag_msg stdin-annotated-tag >actual &&
test_cmp expect actual
'
test_expect_success \
'trying to create a tag with a non-existing -F file should fail' '
! test -f nonexistingfile &&
! tag_exists notag &&
test_must_fail git tag -F nonexistingfile notag &&
! tag_exists notag
'
test_expect_success \
'trying to create tags giving both -m or -F options should fail' '
echo "message file 1" >msgfile1 &&
echo "message file 2" >msgfile2 &&
! tag_exists msgtag &&
test_must_fail git tag -m "message 1" -F msgfile1 msgtag &&
! tag_exists msgtag &&
test_must_fail git tag -F msgfile1 -m "message 1" msgtag &&
! tag_exists msgtag &&
test_must_fail git tag -m "message 1" -F msgfile1 \
-m "message 2" msgtag &&
! tag_exists msgtag
'
# blank and empty messages:
get_tag_header empty-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with an empty -m message should succeed' '
git tag -m "" empty-annotated-tag &&
get_tag_msg empty-annotated-tag >actual &&
test_cmp expect actual
'
>emptyfile
get_tag_header emptyfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with an empty -F messagefile should succeed' '
git tag -F emptyfile emptyfile-annotated-tag &&
get_tag_msg emptyfile-annotated-tag >actual &&
test_cmp expect actual
'
printf '\n\n \n\t\nLeading blank lines\n' >blanksfile
printf '\n\t \t \nRepeated blank lines\n' >>blanksfile
printf '\n\n\nTrailing spaces \t \n' >>blanksfile
printf '\nTrailing blank lines\n\n\t \n\n' >>blanksfile
get_tag_header blanks-annotated-tag $commit commit $time >expect
cat >>expect <<EOF
Leading blank lines
Repeated blank lines
Trailing spaces
Trailing blank lines
EOF
test_expect_success \
'extra blanks in the message for an annotated tag should be removed' '
git tag -F blanksfile blanks-annotated-tag &&
get_tag_msg blanks-annotated-tag >actual &&
test_cmp expect actual
'
get_tag_header blank-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with blank -m message with spaces should succeed' '
git tag -m " " blank-annotated-tag &&
get_tag_msg blank-annotated-tag >actual &&
test_cmp expect actual
'
echo ' ' >blankfile
echo '' >>blankfile
echo ' ' >>blankfile
get_tag_header blankfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with blank -F messagefile with spaces should succeed' '
git tag -F blankfile blankfile-annotated-tag &&
get_tag_msg blankfile-annotated-tag >actual &&
test_cmp expect actual
'
printf ' ' >blanknonlfile
get_tag_header blanknonlfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with -F file of spaces and no newline should succeed' '
git tag -F blanknonlfile blanknonlfile-annotated-tag &&
get_tag_msg blanknonlfile-annotated-tag >actual &&
test_cmp expect actual
'
# messages with commented lines:
cat >commentsfile <<EOF
# A comment
############
The message.
############
One line.
# commented lines
# commented lines
Another line.
# comments
Last line.
EOF
get_tag_header comments-annotated-tag $commit commit $time >expect
cat >>expect <<EOF
The message.
One line.
Another line.
Last line.
EOF
test_expect_success \
'creating a tag using a -F messagefile with #comments should succeed' '
git tag -F commentsfile comments-annotated-tag &&
get_tag_msg comments-annotated-tag >actual &&
test_cmp expect actual
'
get_tag_header comment-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with a #comment in the -m message should succeed' '
git tag -m "#comment" comment-annotated-tag &&
get_tag_msg comment-annotated-tag >actual &&
test_cmp expect actual
'
echo '#comment' >commentfile
echo '' >>commentfile
echo '####' >>commentfile
get_tag_header commentfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with #comments in the -F messagefile should succeed' '
git tag -F commentfile commentfile-annotated-tag &&
get_tag_msg commentfile-annotated-tag >actual &&
test_cmp expect actual
'
printf '#comment' >commentnonlfile
get_tag_header commentnonlfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with a file of #comment and no newline should succeed' '
git tag -F commentnonlfile commentnonlfile-annotated-tag &&
get_tag_msg commentnonlfile-annotated-tag >actual &&
test_cmp expect actual
'
# listing messages for annotated non-signed tags:
test_expect_success \
'listing the one-line message of a non-signed tag should succeed' '
git tag -m "A msg" tag-one-line &&
echo "tag-one-line" >expect &&
git tag -l | grep "^tag-one-line" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^tag-one-line" >actual &&
test_cmp expect actual &&
git tag -n0 -l tag-one-line >actual &&
test_cmp expect actual &&
echo "tag-one-line A msg" >expect &&
git tag -n1 -l | grep "^tag-one-line" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^tag-one-line" >actual &&
test_cmp expect actual &&
git tag -n1 -l tag-one-line >actual &&
test_cmp expect actual &&
git tag -n2 -l tag-one-line >actual &&
test_cmp expect actual &&
git tag -n999 -l tag-one-line >actual &&
test_cmp expect actual
'
test_expect_success \
'listing the zero-lines message of a non-signed tag should succeed' '
git tag -m "" tag-zero-lines &&
echo "tag-zero-lines" >expect &&
git tag -l | grep "^tag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^tag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l tag-zero-lines >actual &&
test_cmp expect actual &&
echo "tag-zero-lines " >expect &&
git tag -n1 -l | grep "^tag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^tag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n1 -l tag-zero-lines >actual &&
test_cmp expect actual &&
git tag -n2 -l tag-zero-lines >actual &&
test_cmp expect actual &&
git tag -n999 -l tag-zero-lines >actual &&
test_cmp expect actual
'
echo 'tag line one' >annotagmsg
echo 'tag line two' >>annotagmsg
echo 'tag line three' >>annotagmsg
test_expect_success \
'listing many message lines of a non-signed tag should succeed' '
git tag -F annotagmsg tag-lines &&
echo "tag-lines" >expect &&
git tag -l | grep "^tag-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^tag-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l tag-lines >actual &&
test_cmp expect actual &&
echo "tag-lines tag line one" >expect &&
git tag -n1 -l | grep "^tag-lines" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^tag-lines" >actual &&
test_cmp expect actual &&
git tag -n1 -l tag-lines >actual &&
test_cmp expect actual &&
echo " tag line two" >>expect &&
git tag -n2 -l | grep "^ *tag.line" >actual &&
test_cmp expect actual &&
git tag -n2 -l tag-lines >actual &&
test_cmp expect actual &&
echo " tag line three" >>expect &&
git tag -n3 -l | grep "^ *tag.line" >actual &&
test_cmp expect actual &&
git tag -n3 -l tag-lines >actual &&
test_cmp expect actual &&
git tag -n4 -l | grep "^ *tag.line" >actual &&
test_cmp expect actual &&
git tag -n4 -l tag-lines >actual &&
test_cmp expect actual &&
git tag -n99 -l | grep "^ *tag.line" >actual &&
test_cmp expect actual &&
git tag -n99 -l tag-lines >actual &&
test_cmp expect actual
'
test_expect_success 'annotations for blobs are empty' '
blob=$(git hash-object -w --stdin <<-\EOF
Blob paragraph 1.
Blob paragraph 2.
EOF
) &&
git tag tag-blob $blob &&
echo "tag-blob " >expect &&
git tag -n1 -l tag-blob >actual &&
test_cmp expect actual
'
# trying to verify annotated non-signed tags:
test_expect_success GPG \
'trying to verify an annotated non-signed tag should fail' '
tag_exists annotated-tag &&
test_must_fail git tag -v annotated-tag
'
test_expect_success GPG \
'trying to verify a file-annotated non-signed tag should fail' '
tag_exists file-annotated-tag &&
test_must_fail git tag -v file-annotated-tag
'
test_expect_success GPG \
'trying to verify two annotated non-signed tags should fail' '
tag_exists annotated-tag file-annotated-tag &&
test_must_fail git tag -v annotated-tag file-annotated-tag
'
# creating and verifying signed tags:
get_tag_header signed-tag $commit commit $time >expect
echo 'A signed tag message' >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG 'creating a signed tag with -m message should succeed' '
git tag -s -m "A signed tag message" signed-tag &&
get_tag_msg signed-tag >actual &&
test_cmp expect actual
'
get_tag_header u-signed-tag $commit commit $time >expect
echo 'Another message' >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG 'sign with a given key id' '
git tag -u committer@example.com -m "Another message" u-signed-tag &&
get_tag_msg u-signed-tag >actual &&
test_cmp expect actual
'
test_expect_success GPG 'sign with an unknown id (1)' '
test_must_fail git tag -u author@example.com \
-m "Another message" o-signed-tag
'
test_expect_success GPG 'sign with an unknown id (2)' '
test_must_fail git tag -u DEADBEEF -m "Another message" o-signed-tag
'
cat >fakeeditor <<'EOF'
#!/bin/sh
test -n "$1" && exec >"$1"
echo A signed tag message
echo from a fake editor.
EOF
chmod +x fakeeditor
get_tag_header implied-sign $commit commit $time >expect
./fakeeditor >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG '-u implies signed tag' '
GIT_EDITOR=./fakeeditor git tag -u CDDE430D implied-sign &&
get_tag_msg implied-sign >actual &&
test_cmp expect actual
'
cat >sigmsgfile <<EOF
Another signed tag
message in a file.
EOF
get_tag_header file-signed-tag $commit commit $time >expect
cat sigmsgfile >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with -F messagefile should succeed' '
git tag -s -F sigmsgfile file-signed-tag &&
get_tag_msg file-signed-tag >actual &&
test_cmp expect actual
'
cat >siginputmsg <<EOF
A signed tag message from
the standard input
EOF
get_tag_header stdin-signed-tag $commit commit $time >expect
cat siginputmsg >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG 'creating a signed tag with -F - should succeed' '
git tag -s -F - stdin-signed-tag <siginputmsg &&
get_tag_msg stdin-signed-tag >actual &&
test_cmp expect actual
'
get_tag_header implied-annotate $commit commit $time >expect
./fakeeditor >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG '-s implies annotated tag' '
GIT_EDITOR=./fakeeditor git tag -s implied-annotate &&
get_tag_msg implied-annotate >actual &&
test_cmp expect actual
'
test_expect_success GPG \
'trying to create a signed tag with non-existing -F file should fail' '
! test -f nonexistingfile &&
! tag_exists nosigtag &&
test_must_fail git tag -s -F nonexistingfile nosigtag &&
! tag_exists nosigtag
'
test_expect_success GPG 'verifying a signed tag should succeed' \
'git tag -v signed-tag'
test_expect_success GPG 'verifying two signed tags in one command should succeed' \
'git tag -v signed-tag file-signed-tag'
test_expect_success GPG \
'verifying many signed and non-signed tags should fail' '
test_must_fail git tag -v signed-tag annotated-tag &&
test_must_fail git tag -v file-annotated-tag file-signed-tag &&
test_must_fail git tag -v annotated-tag \
file-signed-tag file-annotated-tag &&
test_must_fail git tag -v signed-tag annotated-tag file-signed-tag
'
test_expect_success GPG 'verifying a forged tag should fail' '
forged=$(git cat-file tag signed-tag |
sed -e "s/signed-tag/forged-tag/" |
git mktag) &&
git tag forged-tag $forged &&
test_must_fail git tag -v forged-tag
'
# blank and empty messages for signed tags:
get_tag_header empty-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with an empty -m message should succeed' '
git tag -s -m "" empty-signed-tag &&
get_tag_msg empty-signed-tag >actual &&
test_cmp expect actual &&
git tag -v empty-signed-tag
'
>sigemptyfile
get_tag_header emptyfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with an empty -F messagefile should succeed' '
git tag -s -F sigemptyfile emptyfile-signed-tag &&
get_tag_msg emptyfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v emptyfile-signed-tag
'
printf '\n\n \n\t\nLeading blank lines\n' > sigblanksfile
printf '\n\t \t \nRepeated blank lines\n' >>sigblanksfile
printf '\n\n\nTrailing spaces \t \n' >>sigblanksfile
printf '\nTrailing blank lines\n\n\t \n\n' >>sigblanksfile
get_tag_header blanks-signed-tag $commit commit $time >expect
cat >>expect <<EOF
Leading blank lines
Repeated blank lines
Trailing spaces
Trailing blank lines
EOF
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'extra blanks in the message for a signed tag should be removed' '
git tag -s -F sigblanksfile blanks-signed-tag &&
get_tag_msg blanks-signed-tag >actual &&
test_cmp expect actual &&
git tag -v blanks-signed-tag
'
get_tag_header blank-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with a blank -m message should succeed' '
git tag -s -m " " blank-signed-tag &&
get_tag_msg blank-signed-tag >actual &&
test_cmp expect actual &&
git tag -v blank-signed-tag
'
echo ' ' >sigblankfile
echo '' >>sigblankfile
echo ' ' >>sigblankfile
get_tag_header blankfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with blank -F file with spaces should succeed' '
git tag -s -F sigblankfile blankfile-signed-tag &&
get_tag_msg blankfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v blankfile-signed-tag
'
printf ' ' >sigblanknonlfile
get_tag_header blanknonlfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with spaces and no newline should succeed' '
git tag -s -F sigblanknonlfile blanknonlfile-signed-tag &&
get_tag_msg blanknonlfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v signed-tag
'
# messages with commented lines for signed tags:
cat >sigcommentsfile <<EOF
# A comment
############
The message.
############
One line.
# commented lines
# commented lines
Another line.
# comments
Last line.
EOF
get_tag_header comments-signed-tag $commit commit $time >expect
cat >>expect <<EOF
The message.
One line.
Another line.
Last line.
EOF
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with a -F file with #comments should succeed' '
git tag -s -F sigcommentsfile comments-signed-tag &&
get_tag_msg comments-signed-tag >actual &&
test_cmp expect actual &&
git tag -v comments-signed-tag
'
get_tag_header comment-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with #commented -m message should succeed' '
git tag -s -m "#comment" comment-signed-tag &&
get_tag_msg comment-signed-tag >actual &&
test_cmp expect actual &&
git tag -v comment-signed-tag
'
echo '#comment' >sigcommentfile
echo '' >>sigcommentfile
echo '####' >>sigcommentfile
get_tag_header commentfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with #commented -F messagefile should succeed' '
git tag -s -F sigcommentfile commentfile-signed-tag &&
get_tag_msg commentfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v commentfile-signed-tag
'
printf '#comment' >sigcommentnonlfile
get_tag_header commentnonlfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with a #comment and no newline should succeed' '
git tag -s -F sigcommentnonlfile commentnonlfile-signed-tag &&
get_tag_msg commentnonlfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v commentnonlfile-signed-tag
'
# listing messages for signed tags:
test_expect_success GPG \
'listing the one-line message of a signed tag should succeed' '
git tag -s -m "A message line signed" stag-one-line &&
echo "stag-one-line" >expect &&
git tag -l | grep "^stag-one-line" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^stag-one-line" >actual &&
test_cmp expect actual &&
git tag -n0 -l stag-one-line >actual &&
test_cmp expect actual &&
echo "stag-one-line A message line signed" >expect &&
git tag -n1 -l | grep "^stag-one-line" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^stag-one-line" >actual &&
test_cmp expect actual &&
git tag -n1 -l stag-one-line >actual &&
test_cmp expect actual &&
git tag -n2 -l stag-one-line >actual &&
test_cmp expect actual &&
git tag -n999 -l stag-one-line >actual &&
test_cmp expect actual
'
test_expect_success GPG \
'listing the zero-lines message of a signed tag should succeed' '
git tag -s -m "" stag-zero-lines &&
echo "stag-zero-lines" >expect &&
git tag -l | grep "^stag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^stag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l stag-zero-lines >actual &&
test_cmp expect actual &&
echo "stag-zero-lines " >expect &&
git tag -n1 -l | grep "^stag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^stag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n1 -l stag-zero-lines >actual &&
test_cmp expect actual &&
git tag -n2 -l stag-zero-lines >actual &&
test_cmp expect actual &&
git tag -n999 -l stag-zero-lines >actual &&
test_cmp expect actual
'
echo 'stag line one' >sigtagmsg
echo 'stag line two' >>sigtagmsg
echo 'stag line three' >>sigtagmsg
test_expect_success GPG \
'listing many message lines of a signed tag should succeed' '
git tag -s -F sigtagmsg stag-lines &&
echo "stag-lines" >expect &&
git tag -l | grep "^stag-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^stag-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l stag-lines >actual &&
test_cmp expect actual &&
echo "stag-lines stag line one" >expect &&
git tag -n1 -l | grep "^stag-lines" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^stag-lines" >actual &&
test_cmp expect actual &&
git tag -n1 -l stag-lines >actual &&
test_cmp expect actual &&
echo " stag line two" >>expect &&
git tag -n2 -l | grep "^ *stag.line" >actual &&
test_cmp expect actual &&
git tag -n2 -l stag-lines >actual &&
test_cmp expect actual &&
echo " stag line three" >>expect &&
git tag -n3 -l | grep "^ *stag.line" >actual &&
test_cmp expect actual &&
git tag -n3 -l stag-lines >actual &&
test_cmp expect actual &&
git tag -n4 -l | grep "^ *stag.line" >actual &&
test_cmp expect actual &&
git tag -n4 -l stag-lines >actual &&
test_cmp expect actual &&
git tag -n99 -l | grep "^ *stag.line" >actual &&
test_cmp expect actual &&
git tag -n99 -l stag-lines >actual &&
test_cmp expect actual
'
# tags pointing to objects different from commits:
tree=$(git rev-parse HEAD^{tree})
blob=$(git rev-parse HEAD:foo)
tag=$(git rev-parse signed-tag 2>/dev/null)
get_tag_header tree-signed-tag $tree tree $time >expect
echo "A message for a tree" >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag pointing to a tree should succeed' '
git tag -s -m "A message for a tree" tree-signed-tag HEAD^{tree} &&
get_tag_msg tree-signed-tag >actual &&
test_cmp expect actual
'
get_tag_header blob-signed-tag $blob blob $time >expect
echo "A message for a blob" >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag pointing to a blob should succeed' '
git tag -s -m "A message for a blob" blob-signed-tag HEAD:foo &&
get_tag_msg blob-signed-tag >actual &&
test_cmp expect actual
'
get_tag_header tag-signed-tag $tag tag $time >expect
echo "A message for another tag" >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag pointing to another tag should succeed' '
git tag -s -m "A message for another tag" tag-signed-tag signed-tag &&
get_tag_msg tag-signed-tag >actual &&
test_cmp expect actual
'
# usage with rfc1991 signatures
get_tag_header rfc1991-signed-tag $commit commit $time >expect
echo "RFC1991 signed tag" >>expect
echo '-----BEGIN PGP MESSAGE-----' >>expect
test_expect_success GPG,RFC1991 \
'creating a signed tag with rfc1991' '
echo "rfc1991" >gpghome/gpg.conf &&
git tag -s -m "RFC1991 signed tag" rfc1991-signed-tag $commit &&
get_tag_msg rfc1991-signed-tag >actual &&
test_cmp expect actual
'
cat >fakeeditor <<'EOF'
#!/bin/sh
cp "$1" actual
EOF
chmod +x fakeeditor
test_expect_success GPG,RFC1991 \
'reediting a signed tag body omits signature' '
echo "rfc1991" >gpghome/gpg.conf &&
echo "RFC1991 signed tag" >expect &&
GIT_EDITOR=./fakeeditor git tag -f -s rfc1991-signed-tag $commit &&
test_cmp expect actual
'
test_expect_success GPG,RFC1991 \
'verifying rfc1991 signature' '
echo "rfc1991" >gpghome/gpg.conf &&
git tag -v rfc1991-signed-tag
'
test_expect_success GPG,RFC1991 \
'list tag with rfc1991 signature' '
echo "rfc1991" >gpghome/gpg.conf &&
echo "rfc1991-signed-tag RFC1991 signed tag" >expect &&
git tag -l -n1 rfc1991-signed-tag >actual &&
test_cmp expect actual &&
git tag -l -n2 rfc1991-signed-tag >actual &&
test_cmp expect actual &&
git tag -l -n999 rfc1991-signed-tag >actual &&
test_cmp expect actual
'
rm -f gpghome/gpg.conf
test_expect_success GPG,RFC1991 \
'verifying rfc1991 signature without --rfc1991' '
git tag -v rfc1991-signed-tag
'
test_expect_success GPG,RFC1991 \
'list tag with rfc1991 signature without --rfc1991' '
echo "rfc1991-signed-tag RFC1991 signed tag" >expect &&
git tag -l -n1 rfc1991-signed-tag >actual &&
test_cmp expect actual &&
git tag -l -n2 rfc1991-signed-tag >actual &&
test_cmp expect actual &&
git tag -l -n999 rfc1991-signed-tag >actual &&
test_cmp expect actual
'
test_expect_success GPG,RFC1991 \
'reediting a signed tag body omits signature' '
echo "RFC1991 signed tag" >expect &&
GIT_EDITOR=./fakeeditor git tag -f -s rfc1991-signed-tag $commit &&
test_cmp expect actual
'
git-tag -s must fail if gpg cannot sign the tag. Most of this patch code and message was written by Shawn O. Pearce. I made some tests to know what the problem was, and then I changed the code related with the SIGPIPE signal. If the user has misconfigured `user.signingkey` in their .git/config or just doesn't have any secret keys on their keyring and they ask for a signed tag with `git tag -s` we better make sure the resulting tag was actually signed by gpg. Prior versions of builtin git-tag allowed this failure to slip by without error as they were not checking the return value of the finish_command() so they did not notice when gpg exited with an error exit status. They also did not fail if gpg produced an empty output or if read_in_full received an error from the read system call while trying to read the pipe back from gpg. Finally, we did not actually honor any return value from the do_sign function as it returns ssize_t but was being stored into an unsigned long. This caused the compiler to optimize out the die condition, allowing git-tag to continue along and create the tag object. However, when gpg gets a wrong username, it exits before any read was done and then the writing process receives SIGPIPE and program is terminated. By ignoring this signal, anyway, the function write_or_die gets EPIPE from write_in_full and exits returning 0 to the system without a message. Here we better call to write_in_full directly so we can fail printing a message and return safely to the caller. With these issues fixed `git-tag -s` will now fail to create the tag and will report a non-zero exit status to its caller, thereby allowing automated helper scripts to detect (and recover from) failure if gpg is not working properly. Proposed-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-09 08:39:29 +08:00
# try to sign with bad user.signingkey
git config user.signingkey BobTheMouse
test_expect_success GPG \
'git tag -s fails if gpg is misconfigured' \
'test_must_fail git tag -s -m tail tag-gpg-failure'
git-tag -s must fail if gpg cannot sign the tag. Most of this patch code and message was written by Shawn O. Pearce. I made some tests to know what the problem was, and then I changed the code related with the SIGPIPE signal. If the user has misconfigured `user.signingkey` in their .git/config or just doesn't have any secret keys on their keyring and they ask for a signed tag with `git tag -s` we better make sure the resulting tag was actually signed by gpg. Prior versions of builtin git-tag allowed this failure to slip by without error as they were not checking the return value of the finish_command() so they did not notice when gpg exited with an error exit status. They also did not fail if gpg produced an empty output or if read_in_full received an error from the read system call while trying to read the pipe back from gpg. Finally, we did not actually honor any return value from the do_sign function as it returns ssize_t but was being stored into an unsigned long. This caused the compiler to optimize out the die condition, allowing git-tag to continue along and create the tag object. However, when gpg gets a wrong username, it exits before any read was done and then the writing process receives SIGPIPE and program is terminated. By ignoring this signal, anyway, the function write_or_die gets EPIPE from write_in_full and exits returning 0 to the system without a message. Here we better call to write_in_full directly so we can fail printing a message and return safely to the caller. With these issues fixed `git-tag -s` will now fail to create the tag and will report a non-zero exit status to its caller, thereby allowing automated helper scripts to detect (and recover from) failure if gpg is not working properly. Proposed-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-09 08:39:29 +08:00
git config --unset user.signingkey
# try to verify without gpg:
rm -rf gpghome
test_expect_success GPG \
'verify signed tag fails when public key is not present' \
'test_must_fail git tag -v signed-tag'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
'git tag -a fails if tag annotation is empty' '
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
! (GIT_EDITOR=cat git tag -a initial-comment)
'
test_expect_success \
'message in editor has initial comment' '
! (GIT_EDITOR=cat git tag -a initial-comment > actual)
'
test_expect_success 'message in editor has initial comment: first line' '
# check the first line --- should be empty
echo >first.expect &&
sed -e 1q <actual >first.actual &&
test_i18ncmp first.expect first.actual
'
test_expect_success \
'message in editor has initial comment: remainder' '
# remove commented lines from the remainder -- should be empty
>rest.expect &&
sed -e 1d -e "/^#/d" <actual >rest.actual &&
test_cmp rest.expect rest.actual
'
get_tag_header reuse $commit commit $time >expect
echo "An annotation to be reused" >> expect
test_expect_success \
'overwriting an annoted tag should use its previous body' '
git tag -a -m "An annotation to be reused" reuse &&
GIT_EDITOR=true git tag -f -a reuse &&
get_tag_msg reuse >actual &&
test_cmp expect actual
'
test_expect_success 'filename for the message is relative to cwd' '
mkdir subdir &&
echo "Tag message in top directory" >msgfile-5 &&
echo "Tag message in sub directory" >subdir/msgfile-5 &&
(
cd subdir &&
git tag -a -F msgfile-5 tag-from-subdir
) &&
git cat-file tag tag-from-subdir | grep "in sub directory"
'
test_expect_success 'filename for the message is relative to cwd' '
echo "Tag message in sub directory" >subdir/msgfile-6 &&
(
cd subdir &&
git tag -a -F msgfile-6 tag-from-subdir-2
) &&
git cat-file tag tag-from-subdir-2 | grep "in sub directory"
'
# create a few more commits to test --contains
hash1=$(git rev-parse HEAD)
test_expect_success 'creating second commit and tag' '
echo foo-2.0 >foo &&
git add foo &&
git commit -m second &&
git tag v2.0
'
hash2=$(git rev-parse HEAD)
test_expect_success 'creating third commit without tag' '
echo foo-dev >foo &&
git add foo &&
git commit -m third
'
hash3=$(git rev-parse HEAD)
# simple linear checks of --continue
cat > expected <<EOF
v0.2.1
v1.0
v1.0.1
v1.1.3
v2.0
EOF
test_expect_success 'checking that first commit is in all tags (hash)' "
git tag -l --contains $hash1 v* >actual &&
test_cmp expected actual
"
# other ways of specifying the commit
test_expect_success 'checking that first commit is in all tags (tag)' "
git tag -l --contains v1.0 v* >actual &&
test_cmp expected actual
"
test_expect_success 'checking that first commit is in all tags (relative)' "
git tag -l --contains HEAD~2 v* >actual &&
test_cmp expected actual
"
cat > expected <<EOF
v2.0
EOF
test_expect_success 'checking that second commit only has one tag' "
git tag -l --contains $hash2 v* >actual &&
test_cmp expected actual
"
cat > expected <<EOF
EOF
test_expect_success 'checking that third commit has no tags' "
git tag -l --contains $hash3 v* >actual &&
test_cmp expected actual
"
# how about a simple merge?
test_expect_success 'creating simple branch' '
git branch stable v2.0 &&
git checkout stable &&
echo foo-3.0 > foo &&
git commit foo -m fourth &&
git tag v3.0
'
hash4=$(git rev-parse HEAD)
cat > expected <<EOF
v3.0
EOF
test_expect_success 'checking that branch head only has one tag' "
git tag -l --contains $hash4 v* >actual &&
test_cmp expected actual
"
test_expect_success 'merging original branch into this branch' '
git merge --strategy=ours master &&
git tag v4.0
'
cat > expected <<EOF
v4.0
EOF
test_expect_success 'checking that original branch head has one tag now' "
git tag -l --contains $hash3 v* >actual &&
test_cmp expected actual
"
cat > expected <<EOF
v0.2.1
v1.0
v1.0.1
v1.1.3
v2.0
v3.0
v4.0
EOF
test_expect_success 'checking that initial commit is in all tags' "
git tag -l --contains $hash1 v* >actual &&
test_cmp expected actual
"
# mixing modes and options:
test_expect_success 'mixing incompatibles modes and options is forbidden' '
test_must_fail git tag -a &&
test_must_fail git tag -l -v &&
test_must_fail git tag -n 100 &&
test_must_fail git tag -l -m msg &&
test_must_fail git tag -l -F some file &&
test_must_fail git tag -v -s
'
# check points-at
test_expect_success '--points-at cannot be used in non-list mode' '
test_must_fail git tag --points-at=v4.0 foo
'
test_expect_success '--points-at finds lightweight tags' '
echo v4.0 >expect &&
git tag --points-at v4.0 >actual &&
test_cmp expect actual
'
test_expect_success '--points-at finds annotated tags of commits' '
git tag -m "v4.0, annotated" annotated-v4.0 v4.0 &&
echo annotated-v4.0 >expect &&
git tag -l --points-at v4.0 "annotated*" >actual &&
test_cmp expect actual
'
test_expect_success '--points-at finds annotated tags of tags' '
git tag -m "describing the v4.0 tag object" \
annotated-again-v4.0 annotated-v4.0 &&
cat >expect <<-\EOF &&
annotated-again-v4.0
annotated-v4.0
EOF
git tag --points-at=annotated-v4.0 >actual &&
test_cmp expect actual
'
test_expect_success 'multiple --points-at are OR-ed together' '
cat >expect <<-\EOF &&
v2.0
v3.0
EOF
git tag --points-at=v2.0 --points-at=v3.0 >actual &&
test_cmp expect actual
'
test_expect_success 'lexical sort' '
git tag foo1.3 &&
git tag foo1.6 &&
git tag foo1.10 &&
git tag -l --sort=refname "foo*" >actual &&
cat >expect <<-\EOF &&
foo1.10
foo1.3
foo1.6
EOF
test_cmp expect actual
'
test_expect_success 'version sort' '
git tag -l --sort=version:refname "foo*" >actual &&
cat >expect <<-\EOF &&
foo1.3
foo1.6
foo1.10
EOF
test_cmp expect actual
'
test_expect_success 'reverse version sort' '
git tag -l --sort=-version:refname "foo*" >actual &&
cat >expect <<-\EOF &&
foo1.10
foo1.6
foo1.3
EOF
test_cmp expect actual
'
test_expect_success 'reverse lexical sort' '
git tag -l --sort=-refname "foo*" >actual &&
cat >expect <<-\EOF &&
foo1.6
foo1.3
foo1.10
EOF
test_cmp expect actual
'
test_expect_success 'configured lexical sort' '
git config tag.sort "v:refname" &&
git tag -l "foo*" >actual &&
cat >expect <<-\EOF &&
foo1.3
foo1.6
foo1.10
EOF
test_cmp expect actual
'
test_expect_success 'option override configured sort' '
git tag -l --sort=-refname "foo*" >actual &&
cat >expect <<-\EOF &&
foo1.6
foo1.3
foo1.10
EOF
test_cmp expect actual
'
test_expect_success 'invalid sort parameter on command line' '
test_must_fail git tag -l --sort=notvalid "foo*" >actual
'
test_expect_success 'invalid sort parameter in configuratoin' '
git config tag.sort "v:notvalid" &&
test_must_fail git tag -l "foo*"
'
test_expect_success 'version sort with prerelease reordering' '
git config --unset tag.sort &&
git config versionsort.prereleaseSuffix -rc &&
git tag foo1.6-rc1 &&
git tag foo1.6-rc2 &&
git tag -l --sort=version:refname "foo*" >actual &&
cat >expect <<-\EOF &&
foo1.3
foo1.6-rc1
foo1.6-rc2
foo1.6
foo1.10
EOF
test_cmp expect actual
'
test_expect_success 'reverse version sort with prerelease reordering' '
git tag -l --sort=-version:refname "foo*" >actual &&
cat >expect <<-\EOF &&
foo1.10
foo1.6
foo1.6-rc2
foo1.6-rc1
foo1.3
EOF
test_cmp expect actual
'
run_with_limited_stack () {
(ulimit -s 128 && "$@")
}
test_lazy_prereq ULIMIT_STACK_SIZE 'run_with_limited_stack true'
# we require ulimit, this excludes Windows
test_expect_success ULIMIT_STACK_SIZE '--contains works in a deep repo' '
>expect &&
i=1 &&
while test $i -lt 8000
do
echo "commit refs/heads/master
committer A U Thor <author@example.com> $((1000000000 + $i * 100)) +0200
data <<EOF
commit #$i
EOF"
test $i = 1 && echo "from refs/heads/master^0"
i=$(($i + 1))
done | git fast-import &&
git checkout master &&
git tag far-far-away HEAD^ &&
run_with_limited_stack git tag --contains HEAD >actual &&
test_cmp expect actual
'
test_expect_success '--format should list tags as per format given' '
cat >expect <<-\EOF &&
refname : refs/tags/foo1.10
refname : refs/tags/foo1.3
refname : refs/tags/foo1.6
refname : refs/tags/foo1.6-rc1
refname : refs/tags/foo1.6-rc2
EOF
git tag -l --format="refname : %(refname)" "foo*" >actual &&
test_cmp expect actual
'
test_expect_success 'setup --merged test tags' '
git tag mergetest-1 HEAD~2 &&
git tag mergetest-2 HEAD~1 &&
git tag mergetest-3 HEAD
'
test_expect_success '--merged cannot be used in non-list mode' '
test_must_fail git tag --merged=mergetest-2 foo
'
test_expect_success '--merged shows merged tags' '
cat >expect <<-\EOF &&
mergetest-1
mergetest-2
EOF
git tag -l --merged=mergetest-2 mergetest-* >actual &&
test_cmp expect actual
'
test_expect_success '--no-merged show unmerged tags' '
cat >expect <<-\EOF &&
mergetest-3
EOF
git tag -l --no-merged=mergetest-2 mergetest-* >actual &&
test_cmp expect actual
'
tag: do not show ambiguous tag names as "tags/foo" Since b7cc53e9 (tag.c: use 'ref-filter' APIs, 2015-07-11), git-tag has started showing tags with ambiguous names (i.e., when both "heads/foo" and "tags/foo" exists) as "tags/foo" instead of just "foo". This is both: - pointless; the output of "git tag" includes only refs/tags, so we know that "foo" means the one in "refs/tags". and - ambiguous; in the original output, we know that the line "foo" means that "refs/tags/foo" exists. In the new output, it is unclear whether we mean "refs/tags/foo" or "refs/tags/tags/foo". The reason this happens is that commit b7cc53e9 switched git-tag to use ref-filter's "%(refname:short)" output formatting, which was adapted from for-each-ref. This more general code does not know that we care only about tags, and uses shorten_unambiguous_ref to get the short-name. We need to tell it that we care only about "refs/tags/", and it should shorten with respect to that value. In theory, the ref-filter code could figure this out by us passing FILTER_REFS_TAGS. But there are two complications there: 1. The handling of refname:short is deep in formatting code that does not even have our ref_filter struct, let alone the arguments to the filter_ref struct. 2. In git v2.7.0, we expose the formatting language to the user. If we follow this path, it will mean that "%(refname:short)" behaves differently for "tag" versus "for-each-ref" (including "for-each-ref refs/tags/"), which can lead to confusion. Instead, let's add a new modifier to the formatting language, "strip", to remove a specific set of prefix components. This fixes "git tag", and lets users invoke the same behavior from their own custom formats (for "tag" or "for-each-ref") while leaving ":short" with its same consistent meaning in all places. We introduce a test in t7004 for "git tag", which fails without this patch. We also add a similar test in t3203 for "git branch", which does not actually fail. But since it is likely that "branch" will eventually use the same formatting code, the test helps defend against future regressions. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-26 11:00:05 +08:00
test_expect_success 'ambiguous branch/tags not marked' '
git tag ambiguous &&
git branch ambiguous &&
echo ambiguous >expect &&
git tag -l ambiguous >actual &&
test_cmp expect actual
'
test_done