git/builtin-ls-files.c

633 lines
15 KiB
C
Raw Normal View History

/*
* This merges the file listing in the directory cache index
* with the actual working directory list, and shows different
* combinations of the two.
*
* Copyright (C) Linus Torvalds, 2005
*/
#include "cache.h"
#include "quote.h"
#include "dir.h"
#include "builtin.h"
#include "tree.h"
static int abbrev;
static int show_deleted;
static int show_cached;
static int show_others;
static int show_stage;
static int show_unmerged;
static int show_modified;
static int show_killed;
static int show_valid_bit;
static int line_terminator = '\n';
static int prefix_len;
static int prefix_offset;
static const char **pathspec;
static int error_unmatch;
static char *ps_matched;
static const char *with_tree;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
static const char *tag_cached = "";
static const char *tag_unmerged = "";
static const char *tag_removed = "";
static const char *tag_other = "";
static const char *tag_killed = "";
static const char *tag_modified = "";
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
/*
* Match a pathspec against a filename. The first "skiplen" characters
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
* are the common prefix
*/
int pathspec_match(const char **spec, char *ps_matched,
const char *filename, int skiplen)
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
{
const char *m;
while ((m = *spec++) != NULL) {
int matchlen = strlen(m + skiplen);
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
if (!matchlen)
goto matched;
if (!strncmp(m + skiplen, filename + skiplen, matchlen)) {
if (m[skiplen + matchlen - 1] == '/')
goto matched;
switch (filename[skiplen + matchlen]) {
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
case '/': case '\0':
goto matched;
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
}
}
if (!fnmatch(m + skiplen, filename + skiplen, 0))
goto matched;
if (ps_matched)
ps_matched++;
continue;
matched:
if (ps_matched)
*ps_matched = 1;
return 1;
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
}
return 0;
}
static void show_dir_entry(const char *tag, struct dir_entry *ent)
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
{
int len = prefix_len;
int offset = prefix_offset;
if (len >= ent->len)
die("git-ls-files: internal error - directory entry not superset of prefix");
if (pathspec && !pathspec_match(pathspec, ps_matched, ent->name, len))
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
return;
fputs(tag, stdout);
write_name_quoted(ent->name + offset, stdout, line_terminator);
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
}
static void show_other_files(struct dir_struct *dir)
{
int i;
/*
* Skip matching and unmerged entries for the paths,
* since we want just "others".
*
* (Matching entries are normally pruned during
* the directory tree walk, but will show up for
* gitlinks because we don't necessarily have
* dir->show_other_directories set to suppress
* them).
*/
for (i = 0; i < dir->nr; i++) {
struct dir_entry *ent = dir->entries[i];
int len, pos;
struct cache_entry *ce;
/*
* Remove the '/' at the end that directory
* walking adds for directory entries.
*/
len = ent->len;
if (len && ent->name[len-1] == '/')
len--;
pos = cache_name_pos(ent->name, len);
if (0 <= pos)
continue; /* exact match */
pos = -pos - 1;
if (pos < active_nr) {
ce = active_cache[pos];
if (ce_namelen(ce) == len &&
!memcmp(ce->name, ent->name, len))
continue; /* Yup, this one exists unmerged */
}
show_dir_entry(tag_other, ent);
}
}
static void show_killed_files(struct dir_struct *dir)
{
int i;
for (i = 0; i < dir->nr; i++) {
struct dir_entry *ent = dir->entries[i];
char *cp, *sp;
int pos, len, killed = 0;
for (cp = ent->name; cp - ent->name < ent->len; cp = sp + 1) {
sp = strchr(cp, '/');
if (!sp) {
/* If ent->name is prefix of an entry in the
* cache, it will be killed.
*/
pos = cache_name_pos(ent->name, ent->len);
if (0 <= pos)
die("bug in show-killed-files");
pos = -pos - 1;
while (pos < active_nr &&
ce_stage(active_cache[pos]))
pos++; /* skip unmerged */
if (active_nr <= pos)
break;
/* pos points at a name immediately after
* ent->name in the cache. Does it expect
* ent->name to be a directory?
*/
len = ce_namelen(active_cache[pos]);
if ((ent->len < len) &&
!strncmp(active_cache[pos]->name,
ent->name, ent->len) &&
active_cache[pos]->name[ent->len] == '/')
killed = 1;
break;
}
if (0 <= cache_name_pos(ent->name, sp - ent->name)) {
/* If any of the leading directories in
* ent->name is registered in the cache,
* ent->name will be killed.
*/
killed = 1;
break;
}
}
if (killed)
show_dir_entry(tag_killed, dir->entries[i]);
}
}
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
static void show_ce_entry(const char *tag, struct cache_entry *ce)
{
int len = prefix_len;
int offset = prefix_offset;
if (len >= ce_namelen(ce))
die("git-ls-files: internal error - cache entry not superset of prefix");
if (pathspec && !pathspec_match(pathspec, ps_matched, ce->name, len))
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
return;
if (tag && *tag && show_valid_bit &&
(ce->ce_flags & CE_VALID)) {
static char alttag[4];
memcpy(alttag, tag, 3);
if (isalpha(tag[0]))
alttag[0] = tolower(tag[0]);
else if (tag[0] == '?')
alttag[0] = '!';
else {
alttag[0] = 'v';
alttag[1] = tag[0];
alttag[2] = ' ';
alttag[3] = 0;
}
tag = alttag;
}
if (!show_stage) {
fputs(tag, stdout);
} else {
printf("%s%06o %s %d\t",
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
tag,
ce->ce_mode,
abbrev ? find_unique_abbrev(ce->sha1,abbrev)
: sha1_to_hex(ce->sha1),
ce_stage(ce));
}
write_name_quoted(ce->name + offset, stdout, line_terminator);
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
}
static void show_files(struct dir_struct *dir, const char *prefix)
{
int i;
/* For cached/deleted files we don't need to even do the readdir */
if (show_others || show_killed) {
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
const char *path = ".", *base = "";
int baselen = prefix_len;
if (baselen)
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
path = base = prefix;
read_directory(dir, path, base, baselen, pathspec);
if (show_others)
show_other_files(dir);
if (show_killed)
show_killed_files(dir);
}
if (show_cached | show_stage) {
for (i = 0; i < active_nr; i++) {
struct cache_entry *ce = active_cache[i];
int dtype = ce_to_dtype(ce);
if (excluded(dir, ce->name, &dtype) != dir->show_ignored)
continue;
if (show_unmerged && !ce_stage(ce))
continue;
if (ce->ce_flags & CE_UPDATE)
continue;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
show_ce_entry(ce_stage(ce) ? tag_unmerged : tag_cached, ce);
}
}
if (show_deleted | show_modified) {
for (i = 0; i < active_nr; i++) {
struct cache_entry *ce = active_cache[i];
struct stat st;
int err;
int dtype = ce_to_dtype(ce);
if (excluded(dir, ce->name, &dtype) != dir->show_ignored)
continue;
err = lstat(ce->name, &st);
if (show_deleted && err)
show_ce_entry(tag_removed, ce);
if (show_modified && ce_modified(ce, &st, 0))
show_ce_entry(tag_modified, ce);
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
}
}
}
/*
* Prune the index to only contain stuff starting with "prefix"
*/
static void prune_cache(const char *prefix)
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
{
int pos = cache_name_pos(prefix, prefix_len);
unsigned int first, last;
if (pos < 0)
pos = -pos-1;
memmove(active_cache, active_cache + pos,
(active_nr - pos) * sizeof(struct cache_entry *));
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
active_nr -= pos;
first = 0;
last = active_nr;
while (last > first) {
int next = (last + first) >> 1;
struct cache_entry *ce = active_cache[next];
if (!strncmp(ce->name, prefix, prefix_len)) {
first = next+1;
continue;
}
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
last = next;
}
active_nr = last;
}
static const char *verify_pathspec(const char *prefix)
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
{
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
const char **p, *n, *prev;
unsigned long max;
prev = NULL;
max = PATH_MAX;
for (p = pathspec; (n = *p) != NULL; p++) {
int i, len = 0;
for (i = 0; i < max; i++) {
char c = n[i];
if (prev && prev[i] != c)
break;
if (!c || c == '*' || c == '?')
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
break;
if (c == '/')
len = i+1;
}
prev = n;
if (len < max) {
max = len;
if (!max)
break;
}
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
}
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
if (prefix_offset > max || memcmp(prev, prefix, prefix_offset))
die("git-ls-files: cannot generate relative filenames containing '..'");
prefix_len = max;
return max ? xmemdupz(prev, max) : NULL;
}
/*
* Read the tree specified with --with-tree option
* (typically, HEAD) into stage #1 and then
* squash them down to stage #0. This is used for
* --error-unmatch to list and check the path patterns
* that were given from the command line. We are not
* going to write this index out.
*/
void overlay_tree_on_cache(const char *tree_name, const char *prefix)
{
struct tree *tree;
unsigned char sha1[20];
const char **match;
struct cache_entry *last_stage0 = NULL;
int i;
if (get_sha1(tree_name, sha1))
die("tree-ish %s not found.", tree_name);
tree = parse_tree_indirect(sha1);
if (!tree)
die("bad tree-ish %s", tree_name);
/* Hoist the unmerged entries up to stage #3 to make room */
for (i = 0; i < active_nr; i++) {
struct cache_entry *ce = active_cache[i];
if (!ce_stage(ce))
continue;
ce->ce_flags |= CE_STAGEMASK;
}
if (prefix) {
static const char *(matchbuf[2]);
matchbuf[0] = prefix;
matchbuf [1] = NULL;
match = matchbuf;
} else
match = NULL;
if (read_tree(tree, 1, match))
die("unable to read tree entries %s", tree_name);
for (i = 0; i < active_nr; i++) {
struct cache_entry *ce = active_cache[i];
switch (ce_stage(ce)) {
case 0:
last_stage0 = ce;
/* fallthru */
default:
continue;
case 1:
/*
* If there is stage #0 entry for this, we do not
* need to show it. We use CE_UPDATE bit to mark
* such an entry.
*/
if (last_stage0 &&
!strcmp(last_stage0->name, ce->name))
ce->ce_flags |= CE_UPDATE;
}
}
}
int report_path_error(const char *ps_matched, const char **pathspec, int prefix_offset)
{
/*
* Make sure all pathspec matched; otherwise it is an error.
*/
int num, errors = 0;
for (num = 0; pathspec[num]; num++) {
int other, found_dup;
if (ps_matched[num])
continue;
/*
* The caller might have fed identical pathspec
* twice. Do not barf on such a mistake.
*/
for (found_dup = other = 0;
!found_dup && pathspec[other];
other++) {
if (other == num || !ps_matched[other])
continue;
if (!strcmp(pathspec[other], pathspec[num]))
/*
* Ok, we have a match already.
*/
found_dup = 1;
}
if (found_dup)
continue;
error("pathspec '%s' did not match any file(s) known to git.",
pathspec[num] + prefix_offset);
errors++;
}
return errors;
}
static const char ls_files_usage[] =
"git-ls-files [-z] [-t] [-v] (--[cached|deleted|others|stage|unmerged|killed|modified])* "
"[ --ignored ] [--exclude=<pattern>] [--exclude-from=<file>] "
"[ --exclude-per-directory=<filename> ] [--exclude-standard] "
"[--full-name] [--abbrev] [--] [<file>]*";
int cmd_ls_files(int argc, const char **argv, const char *prefix)
{
int i;
int exc_given = 0, require_work_tree = 0;
struct dir_struct dir;
memset(&dir, 0, sizeof(dir));
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
if (prefix)
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
prefix_offset = strlen(prefix);
git_config(git_default_config);
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
for (i = 1; i < argc; i++) {
const char *arg = argv[i];
if (!strcmp(arg, "--")) {
i++;
break;
}
if (!strcmp(arg, "-z")) {
line_terminator = 0;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-t") || !strcmp(arg, "-v")) {
tag_cached = "H ";
tag_unmerged = "M ";
tag_removed = "R ";
tag_modified = "C ";
tag_other = "? ";
tag_killed = "K ";
if (arg[1] == 'v')
show_valid_bit = 1;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-c") || !strcmp(arg, "--cached")) {
show_cached = 1;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-d") || !strcmp(arg, "--deleted")) {
show_deleted = 1;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-m") || !strcmp(arg, "--modified")) {
show_modified = 1;
require_work_tree = 1;
continue;
}
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
if (!strcmp(arg, "-o") || !strcmp(arg, "--others")) {
show_others = 1;
require_work_tree = 1;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-i") || !strcmp(arg, "--ignored")) {
dir.show_ignored = 1;
require_work_tree = 1;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-s") || !strcmp(arg, "--stage")) {
show_stage = 1;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-k") || !strcmp(arg, "--killed")) {
show_killed = 1;
require_work_tree = 1;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "--directory")) {
dir.show_other_directories = 1;
continue;
}
if (!strcmp(arg, "--no-empty-directory")) {
dir.hide_empty_directories = 1;
continue;
}
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
if (!strcmp(arg, "-u") || !strcmp(arg, "--unmerged")) {
/* There's no point in showing unmerged unless
* you also show the stage information.
*/
show_stage = 1;
show_unmerged = 1;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-x") && i+1 < argc) {
exc_given = 1;
add_exclude(argv[++i], "", 0, &dir.exclude_list[EXC_CMDL]);
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!prefixcmp(arg, "--exclude=")) {
exc_given = 1;
add_exclude(arg+10, "", 0, &dir.exclude_list[EXC_CMDL]);
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "-X") && i+1 < argc) {
exc_given = 1;
add_excludes_from_file(&dir, argv[++i]);
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!prefixcmp(arg, "--exclude-from=")) {
exc_given = 1;
add_excludes_from_file(&dir, arg+15);
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!prefixcmp(arg, "--exclude-per-directory=")) {
exc_given = 1;
dir.exclude_per_dir = arg + 24;
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
continue;
}
if (!strcmp(arg, "--exclude-standard")) {
exc_given = 1;
setup_standard_excludes(&dir);
continue;
}
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
if (!strcmp(arg, "--full-name")) {
prefix_offset = 0;
continue;
}
if (!strcmp(arg, "--error-unmatch")) {
error_unmatch = 1;
continue;
}
if (!prefixcmp(arg, "--with-tree=")) {
with_tree = arg + 12;
continue;
}
if (!prefixcmp(arg, "--abbrev=")) {
abbrev = strtoul(arg+9, NULL, 10);
if (abbrev && abbrev < MINIMUM_ABBREV)
abbrev = MINIMUM_ABBREV;
else if (abbrev > 40)
abbrev = 40;
continue;
}
if (!strcmp(arg, "--abbrev")) {
abbrev = DEFAULT_ABBREV;
continue;
}
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
if (*arg == '-')
usage(ls_files_usage);
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
break;
}
if (require_work_tree && !is_inside_work_tree())
setup_work_tree();
[PATCH] git-ls-files: generalized pathspecs This generalizes the git "glob" string to be a lot more like the git-diff-* pathspecs (but there are still differences: the diff family doesn't do any globbing, and because the diff family always generates the full native pathname, it doesn't have the issue with ".."). It does three things: - it allows multiple matching strings, ie you can do things like git-ls-files arch/i386/ include/asm-i386/ | xargs grep pattern - the "matching" criteria is a combination of "exact path component match" (the same as the git-diff-* family), and "fnmatch()". However, you should be careful with the confusion between the git-ls-files internal globbing and the standard shell globbing, ie git-ls-files fs/*.c does globbing in the shell, and does something totally different from git-ls-files 'fs/*.c' which does the globbing inside git-ls-files. The latter has _one_ pathspec with a wildcard, and will match any .c file anywhere under the fs/ directory, while the former has been expanded by the shell into having _lots_ of pathspec entries, all of which are just in the top-level fs/ subdirectory. They will happily be matched exactly, but we will thus miss all the subdirectories under fs/. As a result, the first one will (on the current kernel) match 55 files, while the second one will match 664 files! - it uses the generic path prefixing, so that ".." and friends at the beginning of the path spec work automatically NOTE! When generating relative pathname output (the default), a pathspec that causes the base to be outside the current working directory will be rejected with an error message like: fatal: git-ls-files: cannot generate relative filenames containing '..' because we do not actually generate ".." in the output. However, the ".." format works fine for the --full-name case: cd arch/i386/kernel git-ls-files --full-name ../mm/ results in arch/i386/mm/Makefile arch/i386/mm/boot_ioremap.c arch/i386/mm/discontig.c arch/i386/mm/extable.c arch/i386/mm/fault.c arch/i386/mm/highmem.c arch/i386/mm/hugetlbpage.c arch/i386/mm/init.c arch/i386/mm/ioremap.c arch/i386/mm/mmap.c arch/i386/mm/pageattr.c arch/i386/mm/pgtable.c Perhaps more commonly, the generic path prefixing means that "." and "./" automatically get simplified and work properly. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 08:27:50 +08:00
pathspec = get_pathspec(prefix, argv + i);
/* Verify that the pathspec matches the prefix */
setup: sanitize absolute and funny paths in get_pathspec() The prefix_path() function called from get_pathspec() is responsible for translating list of user-supplied pathspecs to list of pathspecs that is relative to the root of the work tree. When working inside a subdirectory, the user-supplied pathspecs are taken to be relative to the current subdirectory. Among special path components in pathspecs, we used to accept and interpret only "." ("the directory", meaning a no-op) and ".." ("up one level") at the beginning. Everything else was passed through as-is. For example, if you are in Documentation/ directory of the project, you can name Documentation/howto/maintain-git.txt as: howto/maintain-git.txt ../Documentation/howto/maitain-git.txt ../././Documentation/howto/maitain-git.txt but not as: howto/./maintain-git.txt $(pwd)/howto/maintain-git.txt This patch updates prefix_path() in several ways: - If the pathspec is not absolute, prefix (i.e. the current subdirectory relative to the root of the work tree, with terminating slash, if not empty) and the pathspec is concatenated first and used in the next step. Otherwise, that absolute pathspec is used in the next step. - Then special path components "." (no-op) and ".." (up one level) are interpreted to simplify the path. It is an error to have too many ".." to cause the intermediate result to step outside of the input to this step. - If the original pathspec was not absolute, the result from the previous step is the resulting "sanitized" pathspec. Otherwise, the result from the previous step is still absolute, and it is an error if it does not begin with the directory that corresponds to the root of the work tree. The directory is stripped away from the result and is returned. - In any case, the resulting pathspec in the array get_pathspec() returns omit the ones that caused errors. With this patch, the last two examples also behave as expected. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-29 14:44:27 +08:00
if (pathspec) {
if (argc != i) {
int cnt;
for (cnt = 0; pathspec[cnt]; cnt++)
;
if (cnt != (argc - i))
exit(1); /* error message already given */
}
prefix = verify_pathspec(prefix);
setup: sanitize absolute and funny paths in get_pathspec() The prefix_path() function called from get_pathspec() is responsible for translating list of user-supplied pathspecs to list of pathspecs that is relative to the root of the work tree. When working inside a subdirectory, the user-supplied pathspecs are taken to be relative to the current subdirectory. Among special path components in pathspecs, we used to accept and interpret only "." ("the directory", meaning a no-op) and ".." ("up one level") at the beginning. Everything else was passed through as-is. For example, if you are in Documentation/ directory of the project, you can name Documentation/howto/maintain-git.txt as: howto/maintain-git.txt ../Documentation/howto/maitain-git.txt ../././Documentation/howto/maitain-git.txt but not as: howto/./maintain-git.txt $(pwd)/howto/maintain-git.txt This patch updates prefix_path() in several ways: - If the pathspec is not absolute, prefix (i.e. the current subdirectory relative to the root of the work tree, with terminating slash, if not empty) and the pathspec is concatenated first and used in the next step. Otherwise, that absolute pathspec is used in the next step. - Then special path components "." (no-op) and ".." (up one level) are interpreted to simplify the path. It is an error to have too many ".." to cause the intermediate result to step outside of the input to this step. - If the original pathspec was not absolute, the result from the previous step is the resulting "sanitized" pathspec. Otherwise, the result from the previous step is still absolute, and it is an error if it does not begin with the directory that corresponds to the root of the work tree. The directory is stripped away from the result and is returned. - In any case, the resulting pathspec in the array get_pathspec() returns omit the ones that caused errors. With this patch, the last two examples also behave as expected. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-29 14:44:27 +08:00
} else if (argc != i)
exit(1); /* error message already given */
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
/* Treat unmatching pathspec elements as errors */
if (pathspec && error_unmatch) {
int num;
for (num = 0; pathspec[num]; num++)
;
ps_matched = xcalloc(1, num);
}
if (dir.show_ignored && !exc_given) {
fprintf(stderr, "%s: --ignored needs some exclude pattern\n",
argv[0]);
exit(1);
}
/* With no flags, we default to showing the cached files */
if (!(show_stage | show_deleted | show_others | show_unmerged |
show_killed | show_modified))
show_cached = 1;
read_cache();
[PATCH] Make "git-ls-files" work in subdirectories This makes git-ls-files work inside a relative directory, and also adds some rudimentary filename globbing support. For example, in the kernel you can now do cd arch/i386 git-ls-files and it will show all files under that subdirectory (and it will have removed the "arch/i386/" prefix unless you give it the "--full-name" option, so that you can feed the result to "xargs grep" or similar). The filename globbing is kind of strange: it does _not_ follow normal globbing rules, although it does look "almost" like a normal file glob (and it uses the POSIX.2 "fnmatch()" function). The glob pattern (there can be only one) is always split into a "directory part" and a "glob part", where the directory part is defined as any full directory path without any '*' or '?' characters. The "glob" part is whatever is left over. For example, when doing git-ls-files 'arch/i386/p*/*.c' the "directory part" is is "arch/i386/", and the "glob part" is "p*/*.c". The directory part will be added to the prefix, and handled efficiently (ie we will not be searching outside of that subdirectory), while the glob part (if anything is left over) will be used to trigger "fnmatch()" matches. This is efficient and very useful, but can result in somewhat non-intuitive behaviour. For example: git-ls-files 'arch/i386/*.[ch]' will find all .c and .h files under arch/i386/, _including_ things in lower subdirectories (ie it will match "arch/i386/kernel/process.c", because "kernel/process.c" will match the "*.c" specifier). Also, while git-ls-files arch/i386/ will show all files under that subdirectory, doing the same without the final slash would try to show the file "i386" under the "arch/" subdirectory, and since there is no such file (even if there is such a _directory_) it will not match anything at all. These semantics may not seem intuitive, but they are actually very practical. In particular, it makes it very simple to do git-ls-files fs/*.c | xargs grep some_pattern and it does what you want. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-22 03:55:33 +08:00
if (prefix)
prune_cache(prefix);
if (with_tree) {
/*
* Basic sanity check; show-stages and show-unmerged
* would not make any sense with this option.
*/
if (show_stage || show_unmerged)
die("ls-files --with-tree is incompatible with -s or -u");
overlay_tree_on_cache(with_tree, prefix);
}
show_files(&dir, prefix);
if (ps_matched) {
int bad;
bad = report_path_error(ps_matched, pathspec, prefix_offset);
if (bad)
fprintf(stderr, "Did you forget to 'git add'?\n");
return bad ? 1 : 0;
}
return 0;
}