git/color.c

380 lines
7.7 KiB
C
Raw Normal View History

#include "cache.h"
#include "color.h"
static int git_use_color_default = GIT_COLOR_AUTO;
int color_stdout_is_tty = -1;
/*
* The list of available column colors.
*/
const char *column_colors_ansi[] = {
GIT_COLOR_RED,
GIT_COLOR_GREEN,
GIT_COLOR_YELLOW,
GIT_COLOR_BLUE,
GIT_COLOR_MAGENTA,
GIT_COLOR_CYAN,
GIT_COLOR_BOLD_RED,
GIT_COLOR_BOLD_GREEN,
GIT_COLOR_BOLD_YELLOW,
GIT_COLOR_BOLD_BLUE,
GIT_COLOR_BOLD_MAGENTA,
GIT_COLOR_BOLD_CYAN,
GIT_COLOR_RESET,
};
/* Ignore the RESET at the end when giving the size */
const int column_colors_ansi_max = ARRAY_SIZE(column_colors_ansi) - 1;
/* An individual foreground or background color. */
struct color {
enum {
COLOR_UNSPECIFIED = 0,
COLOR_NORMAL,
COLOR_ANSI, /* basic 0-7 ANSI colors */
COLOR_256,
COLOR_RGB
} type;
/* The numeric value for ANSI and 256-color modes */
unsigned char value;
/* 24-bit RGB color values */
unsigned char red, green, blue;
};
/*
* "word" is a buffer of length "len"; does it match the NUL-terminated
* "match" exactly?
*/
static int match_word(const char *word, int len, const char *match)
{
return !strncasecmp(word, match, len) && !match[len];
}
static int get_hex_color(const char *in, unsigned char *out)
{
unsigned int val;
val = (hexval(in[0]) << 4) | hexval(in[1]);
if (val & ~0xff)
return -1;
*out = val;
return 0;
}
static int parse_color(struct color *out, const char *name, int len)
{
/* Positions in array must match ANSI color codes */
static const char * const color_names[] = {
"black", "red", "green", "yellow",
"blue", "magenta", "cyan", "white"
};
char *end;
int i;
long val;
/* First try the special word "normal"... */
if (match_word(name, len, "normal")) {
out->type = COLOR_NORMAL;
return 0;
}
/* Try a 24-bit RGB value */
if (len == 7 && name[0] == '#') {
if (!get_hex_color(name + 1, &out->red) &&
!get_hex_color(name + 3, &out->green) &&
!get_hex_color(name + 5, &out->blue)) {
out->type = COLOR_RGB;
return 0;
}
}
/* Then pick from our human-readable color names... */
for (i = 0; i < ARRAY_SIZE(color_names); i++) {
if (match_word(name, len, color_names[i])) {
out->type = COLOR_ANSI;
out->value = i;
return 0;
}
}
/* And finally try a literal 256-color-mode number */
val = strtol(name, &end, 10);
if (end - name == len) {
/*
* Allow "-1" as an alias for "normal", but other negative
* numbers are bogus.
*/
if (val < -1)
; /* fall through to error */
else if (val < 0) {
out->type = COLOR_NORMAL;
return 0;
/* Rewrite low numbers as more-portable standard colors. */
} else if (val < 8) {
out->type = COLOR_ANSI;
out->value = val;
return 0;
} else if (val < 256) {
out->type = COLOR_256;
out->value = val;
return 0;
}
}
return -1;
}
static int parse_attr(const char *name, int len)
{
static const int attr_values[] = { 1, 2, 4, 5, 7,
22, 22, 24, 25, 27 };
static const char * const attr_names[] = {
"bold", "dim", "ul", "blink", "reverse",
"nobold", "nodim", "noul", "noblink", "noreverse"
};
int i;
for (i = 0; i < ARRAY_SIZE(attr_names); i++) {
const char *str = attr_names[i];
if (!strncasecmp(name, str, len) && !str[len])
return attr_values[i];
}
return -1;
}
int color_parse(const char *value, char *dst)
{
return color_parse_mem(value, strlen(value), dst);
}
/*
* Write the ANSI color codes for "c" to "out"; the string should
* already have the ANSI escape code in it. "out" should have enough
* space in it to fit any color.
*/
static char *color_output(char *out, const struct color *c, char type)
{
switch (c->type) {
case COLOR_UNSPECIFIED:
case COLOR_NORMAL:
break;
case COLOR_ANSI:
*out++ = type;
*out++ = '0' + c->value;
break;
case COLOR_256:
out += sprintf(out, "%c8;5;%d", type, c->value);
break;
case COLOR_RGB:
out += sprintf(out, "%c8;2;%d;%d;%d", type,
c->red, c->green, c->blue);
break;
}
return out;
}
static int color_empty(const struct color *c)
{
return c->type <= COLOR_NORMAL;
}
int color_parse_mem(const char *value, int value_len, char *dst)
{
const char *ptr = value;
int len = value_len;
unsigned int attr = 0;
struct color fg = { COLOR_UNSPECIFIED };
struct color bg = { COLOR_UNSPECIFIED };
if (!strncasecmp(value, "reset", len)) {
strcpy(dst, GIT_COLOR_RESET);
return 0;
}
/* [fg [bg]] [attr]... */
while (len > 0) {
const char *word = ptr;
struct color c;
int val, wordlen = 0;
while (len > 0 && !isspace(word[wordlen])) {
wordlen++;
len--;
}
ptr = word + wordlen;
while (len > 0 && isspace(*ptr)) {
ptr++;
len--;
}
if (!parse_color(&c, word, wordlen)) {
if (fg.type == COLOR_UNSPECIFIED) {
fg = c;
continue;
}
if (bg.type == COLOR_UNSPECIFIED) {
bg = c;
continue;
}
goto bad;
}
val = parse_attr(word, wordlen);
if (0 <= val)
attr |= (1 << val);
else
goto bad;
}
if (attr || !color_empty(&fg) || !color_empty(&bg)) {
int sep = 0;
int i;
*dst++ = '\033';
*dst++ = '[';
for (i = 0; attr; i++) {
unsigned bit = (1 << i);
if (!(attr & bit))
continue;
attr &= ~bit;
if (sep++)
*dst++ = ';';
dst += sprintf(dst, "%d", i);
}
if (!color_empty(&fg)) {
if (sep++)
*dst++ = ';';
/* foreground colors are all in the 3x range */
dst = color_output(dst, &fg, '3');
}
if (!color_empty(&bg)) {
if (sep++)
*dst++ = ';';
/* background colors are all in the 4x range */
dst = color_output(dst, &bg, '4');
}
*dst++ = 'm';
}
*dst = 0;
return 0;
bad:
return error(_("invalid color value: %.*s"), value_len, value);
}
int git_config_colorbool(const char *var, const char *value)
{
if (value) {
if (!strcasecmp(value, "never"))
return 0;
if (!strcasecmp(value, "always"))
return 1;
if (!strcasecmp(value, "auto"))
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
return GIT_COLOR_AUTO;
}
if (!var)
return -1;
/* Missing or explicit false to turn off colorization */
if (!git_config_bool(var, value))
return 0;
/* any normal truth value defaults to 'auto' */
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
return GIT_COLOR_AUTO;
}
static int check_auto_color(void)
{
if (color_stdout_is_tty < 0)
color_stdout_is_tty = isatty(1);
if (color_stdout_is_tty || (pager_in_use() && pager_use_color)) {
char *term = getenv("TERM");
if (term && strcmp(term, "dumb"))
return 1;
}
return 0;
}
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
int want_color(int var)
{
static int want_auto = -1;
if (var < 0)
var = git_use_color_default;
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
if (var == GIT_COLOR_AUTO) {
if (want_auto < 0)
want_auto = check_auto_color();
return want_auto;
}
return var;
color: delay auto-color decision until point of use When we read a color value either from a config file or from the command line, we use git_config_colorbool to convert it from the tristate always/never/auto into a single yes/no boolean value. This has some timing implications with respect to starting a pager. If we start (or decide not to start) the pager before checking the colorbool, everything is fine. Either isatty(1) will give us the right information, or we will properly check for pager_in_use(). However, if we decide to start a pager after we have checked the colorbool, things are not so simple. If stdout is a tty, then we will have already decided to use color. However, the user may also have configured color.pager not to use color with the pager. In this case, we need to actually turn off color. Unfortunately, the pager code has no idea which color variables were turned on (and there are many of them throughout the code, and they may even have been manipulated after the colorbool selection by something like "--color" on the command line). This bug can be seen any time a pager is started after config and command line options are checked. This has affected "git diff" since 89d07f7 (diff: don't run pager if user asked for a diff style exit code, 2007-08-12). It has also affect the log family since 1fda91b (Fix 'git log' early pager startup error case, 2010-08-24). This patch splits the notion of parsing a colorbool and actually checking the configuration. The "use_color" variables now have an additional possible value, GIT_COLOR_AUTO. Users of the variable should use the new "want_color()" wrapper, which will lazily determine and cache the auto-color decision. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-18 13:04:23 +08:00
}
int git_color_config(const char *var, const char *value, void *cb)
{
if (!strcmp(var, "color.ui")) {
git_use_color_default = git_config_colorbool(var, value);
return 0;
}
return 0;
}
int git_color_default_config(const char *var, const char *value, void *cb)
{
if (git_color_config(var, value, cb) < 0)
return -1;
return git_default_config(var, value, cb);
}
void color_print_strbuf(FILE *fp, const char *color, const struct strbuf *sb)
{
if (*color)
fprintf(fp, "%s", color);
fprintf(fp, "%s", sb->buf);
if (*color)
fprintf(fp, "%s", GIT_COLOR_RESET);
}
static int color_vfprintf(FILE *fp, const char *color, const char *fmt,
va_list args, const char *trail)
{
int r = 0;
if (*color)
r += fprintf(fp, "%s", color);
r += vfprintf(fp, fmt, args);
if (*color)
r += fprintf(fp, "%s", GIT_COLOR_RESET);
if (trail)
r += fprintf(fp, "%s", trail);
return r;
}
int color_fprintf(FILE *fp, const char *color, const char *fmt, ...)
{
va_list args;
int r;
va_start(args, fmt);
r = color_vfprintf(fp, color, fmt, args, NULL);
va_end(args);
return r;
}
int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...)
{
va_list args;
int r;
va_start(args, fmt);
r = color_vfprintf(fp, color, fmt, args, "\n");
va_end(args);
return r;
}
int color_is_nil(const char *c)
{
return !strcmp(c, "NIL");
}