git/builtin/difftool.c

795 lines
22 KiB
C
Raw Normal View History

/*
* "git difftool" builtin command
*
* This is a wrapper around the GIT_EXTERNAL_DIFF-compatible
* git-difftool--helper script.
*
* This script exports GIT_EXTERNAL_DIFF and GIT_PAGER for use by git.
* The GIT_DIFF* variables are exported for use by git-difftool--helper.
*
* Any arguments that are unknown to this script are forwarded to 'git diff'.
*
* Copyright (C) 2016 Johannes Schindelin
*/
#define USE_THE_INDEX_VARIABLE
#include "builtin.h"
#include "abspath.h"
#include "config.h"
#include "copy.h"
#include "run-command.h"
#include "environment.h"
#include "exec-cmd.h"
#include "gettext.h"
#include "hex.h"
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
#include "parse-options.h"
#include "read-cache-ll.h"
#include "sparse-index.h"
#include "strvec.h"
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
#include "strbuf.h"
#include "lockfile.h"
#include "object-file.h"
#include "object-store-ll.h"
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
#include "dir.h"
#include "entry.h"
#include "setup.h"
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
static int trust_exit_code;
static const char *const builtin_difftool_usage[] = {
N_("git difftool [<options>] [<commit> [<commit>]] [--] [<path>...]"),
NULL
};
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-29 03:26:22 +08:00
static int difftool_config(const char *var, const char *value,
const struct config_context *ctx, void *cb)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
{
if (!strcmp(var, "difftool.trustexitcode")) {
trust_exit_code = git_config_bool(var, value);
return 0;
}
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-29 03:26:22 +08:00
return git_default_config(var, value, ctx, cb);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
static int print_tool_help(void)
{
struct child_process cmd = CHILD_PROCESS_INIT;
cmd.git_cmd = 1;
strvec_pushl(&cmd.args, "mergetool", "--tool-help=diff", NULL);
return run_command(&cmd);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
static int parse_index_info(char *p, int *mode1, int *mode2,
struct object_id *oid1, struct object_id *oid2,
char *status)
{
if (*p != ':')
return error("expected ':', got '%c'", *p);
*mode1 = (int)strtol(p + 1, &p, 8);
if (*p != ' ')
return error("expected ' ', got '%c'", *p);
*mode2 = (int)strtol(p + 1, &p, 8);
if (*p != ' ')
return error("expected ' ', got '%c'", *p);
if (parse_oid_hex(++p, oid1, (const char **)&p))
return error("expected object ID, got '%s'", p);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (*p != ' ')
return error("expected ' ', got '%c'", *p);
if (parse_oid_hex(++p, oid2, (const char **)&p))
return error("expected object ID, got '%s'", p);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (*p != ' ')
return error("expected ' ', got '%c'", *p);
*status = *++p;
if (!*status)
return error("missing status");
if (p[1] && !isdigit(p[1]))
return error("unexpected trailer: '%s'", p + 1);
return 0;
}
/*
* Remove any trailing slash from $workdir
* before starting to avoid double slashes in symlink targets.
*/
static void add_path(struct strbuf *buf, size_t base_len, const char *path)
{
strbuf_setlen(buf, base_len);
if (buf->len && buf->buf[buf->len - 1] != '/')
strbuf_addch(buf, '/');
strbuf_addstr(buf, path);
}
/*
* Determine whether we can simply reuse the file in the worktree.
*/
static int use_wt_file(const char *workdir, const char *name,
struct object_id *oid)
{
struct strbuf buf = STRBUF_INIT;
struct stat st;
int use = 0;
strbuf_addstr(&buf, workdir);
add_path(&buf, buf.len, name);
if (!lstat(buf.buf, &st) && !S_ISLNK(st.st_mode)) {
struct object_id wt_oid;
int fd = open(buf.buf, O_RDONLY);
if (fd >= 0 &&
!index_fd(&the_index, &wt_oid, fd, &st, OBJ_BLOB, name, 0)) {
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (is_null_oid(oid)) {
oidcpy(oid, &wt_oid);
use = 1;
} else if (oideq(oid, &wt_oid))
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
use = 1;
}
}
strbuf_release(&buf);
return use;
}
struct working_tree_entry {
struct hashmap_entry entry;
char path[FLEX_ARRAY];
};
static int working_tree_entry_cmp(const void *cmp_data UNUSED,
const struct hashmap_entry *eptr,
const struct hashmap_entry *entry_or_key,
const void *keydata UNUSED)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
{
const struct working_tree_entry *a, *b;
a = container_of(eptr, const struct working_tree_entry, entry);
b = container_of(entry_or_key, const struct working_tree_entry, entry);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
return strcmp(a->path, b->path);
}
/*
* The `left` and `right` entries hold paths for the symlinks hashmap,
* and a SHA-1 surrounded by brief text for submodules.
*/
struct pair_entry {
struct hashmap_entry entry;
char left[PATH_MAX], right[PATH_MAX];
const char path[FLEX_ARRAY];
};
static int pair_cmp(const void *cmp_data UNUSED,
const struct hashmap_entry *eptr,
const struct hashmap_entry *entry_or_key,
const void *keydata UNUSED)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
{
const struct pair_entry *a, *b;
a = container_of(eptr, const struct pair_entry, entry);
b = container_of(entry_or_key, const struct pair_entry, entry);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
return strcmp(a->path, b->path);
}
static void add_left_or_right(struct hashmap *map, const char *path,
const char *content, int is_right)
{
struct pair_entry *e, *existing;
FLEX_ALLOC_STR(e, path, path);
hashmap_entry_init(&e->entry, strhash(path));
existing = hashmap_get_entry(map, e, entry, NULL);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (existing) {
free(e);
e = existing;
} else {
e->left[0] = e->right[0] = '\0';
hashmap_add(map, &e->entry);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
strlcpy(is_right ? e->right : e->left, content, PATH_MAX);
}
struct path_entry {
struct hashmap_entry entry;
char path[FLEX_ARRAY];
};
static int path_entry_cmp(const void *cmp_data UNUSED,
const struct hashmap_entry *eptr,
const struct hashmap_entry *entry_or_key,
const void *key)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
{
const struct path_entry *a, *b;
a = container_of(eptr, const struct path_entry, entry);
b = container_of(entry_or_key, const struct path_entry, entry);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
return strcmp(a->path, key ? key : b->path);
}
static void changed_files(struct hashmap *result, const char *index_path,
const char *workdir)
{
struct child_process update_index = CHILD_PROCESS_INIT;
struct child_process diff_files = CHILD_PROCESS_INIT;
struct strbuf buf = STRBUF_INIT;
const char *git_dir = absolute_path(get_git_dir());
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
FILE *fp;
strvec_pushl(&update_index.args,
"--git-dir", git_dir, "--work-tree", workdir,
"update-index", "--really-refresh", "-q",
"--unmerged", NULL);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
update_index.no_stdin = 1;
update_index.no_stdout = 1;
update_index.no_stderr = 1;
update_index.git_cmd = 1;
update_index.use_shell = 0;
update_index.clean_on_exit = 1;
update_index.dir = workdir;
strvec_pushf(&update_index.env, "GIT_INDEX_FILE=%s", index_path);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
/* Ignore any errors of update-index */
run_command(&update_index);
strvec_pushl(&diff_files.args,
"--git-dir", git_dir, "--work-tree", workdir,
"diff-files", "--name-only", "-z", NULL);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
diff_files.no_stdin = 1;
diff_files.git_cmd = 1;
diff_files.use_shell = 0;
diff_files.clean_on_exit = 1;
diff_files.out = -1;
diff_files.dir = workdir;
strvec_pushf(&diff_files.env, "GIT_INDEX_FILE=%s", index_path);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (start_command(&diff_files))
die("could not obtain raw diff");
fp = xfdopen(diff_files.out, "r");
while (!strbuf_getline_nul(&buf, fp)) {
struct path_entry *entry;
FLEX_ALLOC_STR(entry, path, buf.buf);
hashmap_entry_init(&entry->entry, strhash(buf.buf));
hashmap_add(result, &entry->entry);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
fclose(fp);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (finish_command(&diff_files))
die("diff-files did not exit properly");
strbuf_release(&buf);
}
static int ensure_leading_directories(char *path)
{
switch (safe_create_leading_directories(path)) {
case SCLD_OK:
case SCLD_EXISTS:
return 0;
default:
return error(_("could not create leading directories "
"of '%s'"), path);
}
}
/*
* Unconditional writing of a plain regular file is what
* "git difftool --dir-diff" wants to do for symlinks. We are preparing two
* temporary directories to be fed to a Git-unaware tool that knows how to
* show a diff of two directories (e.g. "diff -r A B").
*
* Because the tool is Git-unaware, if a symbolic link appears in either of
* these temporary directories, it will try to dereference and show the
* difference of the target of the symbolic link, which is not what we want,
* as the goal of the dir-diff mode is to produce an output that is logically
* equivalent to what "git diff" produces.
*
* Most importantly, we want to get textual comparison of the result of the
* readlink(2). get_symlink() provides that---it returns the contents of
* the symlink that gets written to a regular file to force the external tool
* to compare the readlink(2) result as text, even on a filesystem that is
* capable of doing a symbolic link.
*/
static char *get_symlink(const struct object_id *oid, const char *path)
{
char *data;
if (is_null_oid(oid)) {
/* The symlink is unknown to Git so read from the filesystem */
struct strbuf link = STRBUF_INIT;
if (has_symlinks) {
if (strbuf_readlink(&link, path, strlen(path)))
die(_("could not read symlink %s"), path);
} else if (strbuf_read_file(&link, path, 128))
die(_("could not read symlink file %s"), path);
data = strbuf_detach(&link, NULL);
} else {
enum object_type type;
unsigned long size;
data = repo_read_object_file(the_repository, oid, &type,
&size);
if (!data)
die(_("could not read object %s for symlink %s"),
oid_to_hex(oid), path);
}
return data;
}
static int checkout_path(unsigned mode, struct object_id *oid,
const char *path, const struct checkout *state)
{
struct cache_entry *ce;
int ret;
ce = make_transient_cache_entry(mode, oid, path, 0, NULL);
ret = checkout_entry(ce, state, NULL, NULL);
block alloc: add lifecycle APIs for cache_entry structs It has been observed that the time spent loading an index with a large number of entries is partly dominated by malloc() calls. This change is in preparation for using memory pools to reduce the number of malloc() calls made to allocate cahce entries when loading an index. Add an API to allocate and discard cache entries, abstracting the details of managing the memory backing the cache entries. This commit does actually change how memory is managed - this will be done in a later commit in the series. This change makes the distinction between cache entries that are associated with an index and cache entries that are not associated with an index. A main use of cache entries is with an index, and we can optimize the memory management around this. We still have other cases where a cache entry is not persisted with an index, and so we need to handle the "transient" use case as well. To keep the congnitive overhead of managing the cache entries, there will only be a single discard function. This means there must be enough information kept with the cache entry so that we know how to discard them. A summary of the main functions in the API is: make_cache_entry: create cache entry for use in an index. Uses specified parameters to populate cache_entry fields. make_empty_cache_entry: Create an empty cache entry for use in an index. Returns cache entry with empty fields. make_transient_cache_entry: create cache entry that is not used in an index. Uses specified parameters to populate cache_entry fields. make_empty_transient_cache_entry: create cache entry that is not used in an index. Returns cache entry with empty fields. discard_cache_entry: A single function that knows how to discard a cache entry regardless of how it was allocated. Signed-off-by: Jameson Miller <jamill@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 03:49:31 +08:00
discard_cache_entry(ce);
return ret;
}
static void write_file_in_directory(struct strbuf *dir, size_t dir_len,
const char *path, const char *content)
{
add_path(dir, dir_len, path);
ensure_leading_directories(dir->buf);
unlink(dir->buf);
write_file(dir->buf, "%s", content);
}
/* Write the file contents for the left and right sides of the difftool
* dir-diff representation for submodules and symlinks. Symlinks and submodules
* are written as regular text files so that external diff tools can diff them
* as text files, resulting in behavior that is analogous to to what "git diff"
* displays for symlink and submodule diffs.
*/
static void write_standin_files(struct pair_entry *entry,
struct strbuf *ldir, size_t ldir_len,
struct strbuf *rdir, size_t rdir_len)
{
if (*entry->left)
write_file_in_directory(ldir, ldir_len, entry->path, entry->left);
if (*entry->right)
write_file_in_directory(rdir, rdir_len, entry->path, entry->right);
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
static int run_dir_diff(const char *extcmd, int symlinks, const char *prefix,
struct child_process *child)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
{
struct strbuf info = STRBUF_INIT, lpath = STRBUF_INIT;
struct strbuf rpath = STRBUF_INIT, buf = STRBUF_INIT;
struct strbuf ldir = STRBUF_INIT, rdir = STRBUF_INIT;
struct strbuf wtdir = STRBUF_INIT;
struct strbuf tmpdir = STRBUF_INIT;
char *lbase_dir = NULL, *rbase_dir = NULL;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
size_t ldir_len, rdir_len, wtdir_len;
const char *workdir, *tmp;
int ret = 0, i;
FILE *fp = NULL;
struct hashmap working_tree_dups = HASHMAP_INIT(working_tree_entry_cmp,
NULL);
struct hashmap submodules = HASHMAP_INIT(pair_cmp, NULL);
struct hashmap symlinks2 = HASHMAP_INIT(pair_cmp, NULL);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
struct hashmap_iter iter;
struct pair_entry *entry;
treewide: always have a valid "index_state.repo" member When the "repo" member was added to "the_index" in [1] the repo_read_index() was made to populate it, but the unpopulated "the_index" variable didn't get the same treatment. Let's do that in initialize_the_repository() when we set it up, and likewise for all of the current callers initialized an empty "struct index_state". This simplifies code that needs to deal with "the_index" or a custom "struct index_state", we no longer need to second-guess this part of the "index_state" deep in the stack. A recent example of such second-guessing is the "istate->repo ? istate->repo : the_repository" code in [2]. We can now simply use "istate->repo". We're doing this by making use of the INDEX_STATE_INIT() macro (and corresponding function) added in [3], which now have mandatory "repo" arguments. Because we now call index_state_init() in repository.c's initialize_the_repository() we don't need to handle the case where we have a "repo->index" whose "repo" member doesn't match the "repo" we're setting up, i.e. the "Complete the double-reference" code in repo_read_index() being altered here. That logic was originally added in [1], and was working around the lack of what we now have in initialize_the_repository(). For "fsmonitor-settings.c" we can remove the initialization of a NULL "r" argument to "the_repository". This was added back in [4], and was needed at the time for callers that would pass us the "r" from an "istate->repo". Before this change such a change to "fsmonitor-settings.c" would segfault all over the test suite (e.g. in t0002-gitfile.sh). This change has wider eventual implications for "fsmonitor-settings.c". The reason the other lazy loading behavior in it is required (starting with "if (!r->settings.fsmonitor) ..." is because of the previously passed "r" being "NULL". I have other local changes on top of this which move its configuration reading to "prepare_repo_settings()" in "repo-settings.c", as we could now start to rely on it being called for our "r". But let's leave all of that for now, and narrowly remove this particular part of the lazy-loading. 1. 1fd9ae517c4 (repository: add repo reference to index_state, 2021-01-23) 2. ee1f0c242ef (read-cache: add index.skipHash config option, 2023-01-06) 3. 2f6b1eb794e (cache API: add a "INDEX_STATE_INIT" macro/function, add release_index(), 2023-01-12) 4. 1e0ea5c4316 (fsmonitor: config settings are repository-specific, 2022-03-25) Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 21:57:00 +08:00
struct index_state wtindex = INDEX_STATE_INIT(the_repository);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
struct checkout lstate, rstate;
int err = 0;
struct child_process cmd = CHILD_PROCESS_INIT;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
struct hashmap wt_modified, tmp_modified;
int indices_loaded = 0;
workdir = get_git_work_tree();
/* Setup temp directories */
tmp = getenv("TMPDIR");
strbuf_add_absolute_path(&tmpdir, tmp ? tmp : "/tmp");
strbuf_trim_trailing_dir_sep(&tmpdir);
strbuf_addstr(&tmpdir, "/git-difftool.XXXXXX");
if (!mkdtemp(tmpdir.buf)) {
ret = error("could not create '%s'", tmpdir.buf);
goto finish;
}
strbuf_addf(&ldir, "%s/left/", tmpdir.buf);
strbuf_addf(&rdir, "%s/right/", tmpdir.buf);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
strbuf_addstr(&wtdir, workdir);
if (!wtdir.len || !is_dir_sep(wtdir.buf[wtdir.len - 1]))
strbuf_addch(&wtdir, '/');
mkdir(ldir.buf, 0700);
mkdir(rdir.buf, 0700);
memset(&lstate, 0, sizeof(lstate));
lstate.base_dir = lbase_dir = xstrdup(ldir.buf);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
lstate.base_dir_len = ldir.len;
lstate.force = 1;
memset(&rstate, 0, sizeof(rstate));
rstate.base_dir = rbase_dir = xstrdup(rdir.buf);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
rstate.base_dir_len = rdir.len;
rstate.force = 1;
ldir_len = ldir.len;
rdir_len = rdir.len;
wtdir_len = wtdir.len;
child->no_stdin = 1;
child->git_cmd = 1;
child->use_shell = 0;
child->clean_on_exit = 1;
child->dir = prefix;
child->out = -1;
if (start_command(child))
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
die("could not obtain raw diff");
fp = xfdopen(child->out, "r");
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
/* Build index info for left and right sides of the diff */
i = 0;
while (!strbuf_getline_nul(&info, fp)) {
int lmode, rmode;
struct object_id loid, roid;
char status;
const char *src_path, *dst_path;
if (starts_with(info.buf, "::"))
die(N_("combined diff formats ('-c' and '--cc') are "
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
"not supported in\n"
"directory diff mode ('-d' and '--dir-diff')."));
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (parse_index_info(info.buf, &lmode, &rmode, &loid, &roid,
&status))
break;
if (strbuf_getline_nul(&lpath, fp))
break;
src_path = lpath.buf;
i++;
if (status != 'C' && status != 'R') {
dst_path = src_path;
} else {
if (strbuf_getline_nul(&rpath, fp))
break;
dst_path = rpath.buf;
}
if (S_ISGITLINK(lmode) || S_ISGITLINK(rmode)) {
strbuf_reset(&buf);
strbuf_addf(&buf, "Subproject commit %s",
oid_to_hex(&loid));
add_left_or_right(&submodules, src_path, buf.buf, 0);
strbuf_reset(&buf);
strbuf_addf(&buf, "Subproject commit %s",
oid_to_hex(&roid));
if (oideq(&loid, &roid))
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
strbuf_addstr(&buf, "-dirty");
add_left_or_right(&submodules, dst_path, buf.buf, 1);
continue;
}
if (S_ISLNK(lmode)) {
char *content = get_symlink(&loid, src_path);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
add_left_or_right(&symlinks2, src_path, content, 0);
free(content);
}
if (S_ISLNK(rmode)) {
char *content = get_symlink(&roid, dst_path);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
add_left_or_right(&symlinks2, dst_path, content, 1);
free(content);
}
if (lmode && status != 'C') {
if (checkout_path(lmode, &loid, src_path, &lstate)) {
ret = error("could not write '%s'", src_path);
goto finish;
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
if (rmode && !S_ISLNK(rmode)) {
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
struct working_tree_entry *entry;
/* Avoid duplicate working_tree entries */
FLEX_ALLOC_STR(entry, path, dst_path);
hashmap_entry_init(&entry->entry, strhash(dst_path));
if (hashmap_get(&working_tree_dups, &entry->entry,
NULL)) {
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
free(entry);
continue;
}
hashmap_add(&working_tree_dups, &entry->entry);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (!use_wt_file(workdir, dst_path, &roid)) {
if (checkout_path(rmode, &roid, dst_path,
&rstate)) {
ret = error("could not write '%s'",
dst_path);
goto finish;
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
} else if (!is_null_oid(&roid)) {
/*
* Changes in the working tree need special
* treatment since they are not part of the
* index.
*/
struct cache_entry *ce2 =
block alloc: add lifecycle APIs for cache_entry structs It has been observed that the time spent loading an index with a large number of entries is partly dominated by malloc() calls. This change is in preparation for using memory pools to reduce the number of malloc() calls made to allocate cahce entries when loading an index. Add an API to allocate and discard cache entries, abstracting the details of managing the memory backing the cache entries. This commit does actually change how memory is managed - this will be done in a later commit in the series. This change makes the distinction between cache entries that are associated with an index and cache entries that are not associated with an index. A main use of cache entries is with an index, and we can optimize the memory management around this. We still have other cases where a cache entry is not persisted with an index, and so we need to handle the "transient" use case as well. To keep the congnitive overhead of managing the cache entries, there will only be a single discard function. This means there must be enough information kept with the cache entry so that we know how to discard them. A summary of the main functions in the API is: make_cache_entry: create cache entry for use in an index. Uses specified parameters to populate cache_entry fields. make_empty_cache_entry: Create an empty cache entry for use in an index. Returns cache entry with empty fields. make_transient_cache_entry: create cache entry that is not used in an index. Uses specified parameters to populate cache_entry fields. make_empty_transient_cache_entry: create cache entry that is not used in an index. Returns cache entry with empty fields. discard_cache_entry: A single function that knows how to discard a cache entry regardless of how it was allocated. Signed-off-by: Jameson Miller <jamill@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 03:49:31 +08:00
make_cache_entry(&wtindex, rmode, &roid,
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
dst_path, 0, 0);
add_index_entry(&wtindex, ce2,
ADD_CACHE_JUST_APPEND);
add_path(&rdir, rdir_len, dst_path);
if (ensure_leading_directories(rdir.buf)) {
ret = error("could not create "
"directory for '%s'",
dst_path);
goto finish;
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
add_path(&wtdir, wtdir_len, dst_path);
if (symlinks) {
if (symlink(wtdir.buf, rdir.buf)) {
ret = error_errno("could not symlink '%s' to '%s'", wtdir.buf, rdir.buf);
goto finish;
}
} else {
struct stat st;
if (stat(wtdir.buf, &st))
st.st_mode = 0644;
if (copy_file(rdir.buf, wtdir.buf,
st.st_mode)) {
ret = error("could not copy '%s' to '%s'", wtdir.buf, rdir.buf);
goto finish;
}
}
}
}
}
fclose(fp);
fp = NULL;
if (finish_command(child)) {
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
ret = error("error occurred running diff --raw");
goto finish;
}
if (!i)
goto finish;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
/*
* Changes to submodules require special treatment.This loop writes a
* temporary file to both the left and right directories to show the
* change in the recorded SHA1 for the submodule.
*/
hashmap_for_each_entry(&submodules, &iter, entry,
entry /* member name */) {
write_standin_files(entry, &ldir, ldir_len, &rdir, rdir_len);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
/*
* Symbolic links require special treatment. The standard "git diff"
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
* shows only the link itself, not the contents of the link target.
* This loop replicates that behavior.
*/
hashmap_for_each_entry(&symlinks2, &iter, entry,
entry /* member name */) {
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
write_standin_files(entry, &ldir, ldir_len, &rdir, rdir_len);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
strbuf_setlen(&ldir, ldir_len);
strbuf_setlen(&rdir, rdir_len);
if (extcmd) {
strvec_push(&cmd.args, extcmd);
} else {
strvec_push(&cmd.args, "difftool--helper");
cmd.git_cmd = 1;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
setenv("GIT_DIFFTOOL_DIRDIFF", "true", 1);
}
strvec_pushl(&cmd.args, ldir.buf, rdir.buf, NULL);
ret = run_command(&cmd);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
/* TODO: audit for interaction with sparse-index. */
ensure_full_index(&wtindex);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
/*
* If the diff includes working copy files and those
* files were modified during the diff, then the changes
* should be copied back to the working tree.
* Do not copy back files when symlinks are used and the
* external tool did not replace the original link with a file.
*
* These hashes are loaded lazily since they aren't needed
* in the common case of --symlinks and the difftool updating
* files through the symlink.
*/
hashmap_init(&wt_modified, path_entry_cmp, NULL, wtindex.cache_nr);
hashmap_init(&tmp_modified, path_entry_cmp, NULL, wtindex.cache_nr);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
for (i = 0; i < wtindex.cache_nr; i++) {
struct hashmap_entry dummy;
const char *name = wtindex.cache[i]->name;
struct stat st;
add_path(&rdir, rdir_len, name);
if (lstat(rdir.buf, &st))
continue;
if ((symlinks && S_ISLNK(st.st_mode)) || !S_ISREG(st.st_mode))
continue;
if (!indices_loaded) {
struct lock_file lock = LOCK_INIT;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
strbuf_reset(&buf);
strbuf_addf(&buf, "%s/wtindex", tmpdir.buf);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (hold_lock_file_for_update(&lock, buf.buf, 0) < 0 ||
write_locked_index(&wtindex, &lock, COMMIT_LOCK)) {
ret = error("could not write %s", buf.buf);
goto finish;
}
changed_files(&wt_modified, buf.buf, workdir);
strbuf_setlen(&rdir, rdir_len);
changed_files(&tmp_modified, buf.buf, rdir.buf);
add_path(&rdir, rdir_len, name);
indices_loaded = 1;
}
hashmap_entry_init(&dummy, strhash(name));
if (hashmap_get(&tmp_modified, &dummy, name)) {
add_path(&wtdir, wtdir_len, name);
if (hashmap_get(&wt_modified, &dummy, name)) {
warning(_("both files modified: '%s' and '%s'."),
wtdir.buf, rdir.buf);
warning(_("working tree file has been left."));
warning("%s", "");
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
err = 1;
} else if (unlink(wtdir.buf) ||
copy_file(wtdir.buf, rdir.buf, st.st_mode))
warning_errno(_("could not copy '%s' to '%s'"),
rdir.buf, wtdir.buf);
}
}
if (err) {
warning(_("temporary files exist in '%s'."), tmpdir.buf);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
warning(_("you may want to cleanup or recover these."));
ret = 1;
} else {
remove_dir_recursively(&tmpdir, 0);
if (ret)
warning(_("failed: %d"), ret);
}
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
finish:
if (fp)
fclose(fp);
free(lbase_dir);
free(rbase_dir);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
strbuf_release(&ldir);
strbuf_release(&rdir);
strbuf_release(&wtdir);
strbuf_release(&buf);
strbuf_release(&tmpdir);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
return (ret < 0) ? 1 : ret;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
static int run_file_diff(int prompt, const char *prefix,
struct child_process *child)
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
{
const char *env[] = {
"GIT_PAGER=", "GIT_EXTERNAL_DIFF=git-difftool--helper", NULL,
NULL
};
if (prompt > 0)
env[2] = "GIT_DIFFTOOL_PROMPT=true";
else if (!prompt)
env[2] = "GIT_DIFFTOOL_NO_PROMPT=true";
child->git_cmd = 1;
child->dir = prefix;
strvec_pushv(&child->env, env);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
return run_command(child);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
}
int cmd_difftool(int argc, const char **argv, const char *prefix)
{
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY When no merge.tool or diff.tool is configured or manually selected, the selection of a default tool is sensitive to the DISPLAY variable; in a GUI session a gui-specific tool will be proposed if found, and otherwise a terminal-based one. This "GUI-optimizing" behavior is important because a GUI can make a huge difference to a user's ability to understand and correctly complete a non-trivial conflicting merge. Some time ago the merge.guitool and diff.guitool config options were introduced to enable users to configure both a GUI tool, and a non-GUI tool (with fallback if no GUI tool configured), in the same environment. Unfortunately, the --gui argument introduced to support the selection of the guitool is still explicit. When using configured tools, there is no equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI environment" behavior. As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration options, difftool.guiDefault and mergetool.guiDefault, supporting a special value "auto" which causes the corresponding tool or guitool to be selected depending on the presence of a non-empty DISPLAY value. Also support "true" to say "default to the guitool (unless --no-gui is passed on the commandline)", and "false" as the previous default behavior when these new configuration options are not specified. Signed-off-by: Tao Klerks <tao@klerks.biz> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-03-18 23:27:43 +08:00
int use_gui_tool = -1, dir_diff = 0, prompt = -1, symlinks = 0,
tool_help = 0, no_index = 0;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
static char *difftool_cmd = NULL, *extcmd = NULL;
struct option builtin_difftool_options[] = {
OPT_BOOL('g', "gui", &use_gui_tool,
N_("use `diff.guitool` instead of `diff.tool`")),
OPT_BOOL('d', "dir-diff", &dir_diff,
N_("perform a full-directory diff")),
OPT_SET_INT_F('y', "no-prompt", &prompt,
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
N_("do not prompt before launching a diff tool"),
0, PARSE_OPT_NONEG),
OPT_SET_INT_F(0, "prompt", &prompt, NULL,
1, PARSE_OPT_NONEG | PARSE_OPT_HIDDEN),
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
OPT_BOOL(0, "symlinks", &symlinks,
N_("use symlinks in dir-diff mode")),
OPT_STRING('t', "tool", &difftool_cmd, N_("tool"),
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
N_("use the specified diff tool")),
OPT_BOOL(0, "tool-help", &tool_help,
N_("print a list of diff tools that may be used with "
"`--tool`")),
OPT_BOOL(0, "trust-exit-code", &trust_exit_code,
N_("make 'git-difftool' exit when an invoked diff "
"tool returns a non-zero exit code")),
OPT_STRING('x', "extcmd", &extcmd, N_("command"),
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
N_("specify a custom command for viewing diffs")),
OPT_BOOL(0, "no-index", &no_index, N_("passed to `diff`")),
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
OPT_END()
};
struct child_process child = CHILD_PROCESS_INIT;
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
git_config(difftool_config, NULL);
symlinks = has_symlinks;
argc = parse_options(argc, argv, prefix, builtin_difftool_options,
builtin_difftool_usage, PARSE_OPT_KEEP_UNKNOWN_OPT |
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
PARSE_OPT_KEEP_DASHDASH);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (tool_help)
return print_tool_help();
if (!no_index && !startup_info->have_repository)
die(_("difftool requires worktree or --no-index"));
if (!no_index){
setup_work_tree();
setenv(GIT_DIR_ENVIRONMENT, absolute_path(get_git_dir()), 1);
setenv(GIT_WORK_TREE_ENVIRONMENT, absolute_path(get_git_work_tree()), 1);
} else if (dir_diff)
die(_("options '%s' and '%s' cannot be used together"), "--dir-diff", "--no-index");
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY When no merge.tool or diff.tool is configured or manually selected, the selection of a default tool is sensitive to the DISPLAY variable; in a GUI session a gui-specific tool will be proposed if found, and otherwise a terminal-based one. This "GUI-optimizing" behavior is important because a GUI can make a huge difference to a user's ability to understand and correctly complete a non-trivial conflicting merge. Some time ago the merge.guitool and diff.guitool config options were introduced to enable users to configure both a GUI tool, and a non-GUI tool (with fallback if no GUI tool configured), in the same environment. Unfortunately, the --gui argument introduced to support the selection of the guitool is still explicit. When using configured tools, there is no equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI environment" behavior. As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration options, difftool.guiDefault and mergetool.guiDefault, supporting a special value "auto" which causes the corresponding tool or guitool to be selected depending on the presence of a non-empty DISPLAY value. Also support "true" to say "default to the guitool (unless --no-gui is passed on the commandline)", and "false" as the previous default behavior when these new configuration options are not specified. Signed-off-by: Tao Klerks <tao@klerks.biz> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-03-18 23:27:43 +08:00
die_for_incompatible_opt3(use_gui_tool == 1, "--gui",
!!difftool_cmd, "--tool",
!!extcmd, "--extcmd");
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY When no merge.tool or diff.tool is configured or manually selected, the selection of a default tool is sensitive to the DISPLAY variable; in a GUI session a gui-specific tool will be proposed if found, and otherwise a terminal-based one. This "GUI-optimizing" behavior is important because a GUI can make a huge difference to a user's ability to understand and correctly complete a non-trivial conflicting merge. Some time ago the merge.guitool and diff.guitool config options were introduced to enable users to configure both a GUI tool, and a non-GUI tool (with fallback if no GUI tool configured), in the same environment. Unfortunately, the --gui argument introduced to support the selection of the guitool is still explicit. When using configured tools, there is no equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI environment" behavior. As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration options, difftool.guiDefault and mergetool.guiDefault, supporting a special value "auto" which causes the corresponding tool or guitool to be selected depending on the presence of a non-empty DISPLAY value. Also support "true" to say "default to the guitool (unless --no-gui is passed on the commandline)", and "false" as the previous default behavior when these new configuration options are not specified. Signed-off-by: Tao Klerks <tao@klerks.biz> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-03-18 23:27:43 +08:00
/*
* Explicitly specified GUI option is forwarded to git-mergetool--lib.sh;
* empty or unset means "use the difftool.guiDefault config or default to
* false".
*/
if (use_gui_tool == 1)
setenv("GIT_MERGETOOL_GUI", "true", 1);
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY When no merge.tool or diff.tool is configured or manually selected, the selection of a default tool is sensitive to the DISPLAY variable; in a GUI session a gui-specific tool will be proposed if found, and otherwise a terminal-based one. This "GUI-optimizing" behavior is important because a GUI can make a huge difference to a user's ability to understand and correctly complete a non-trivial conflicting merge. Some time ago the merge.guitool and diff.guitool config options were introduced to enable users to configure both a GUI tool, and a non-GUI tool (with fallback if no GUI tool configured), in the same environment. Unfortunately, the --gui argument introduced to support the selection of the guitool is still explicit. When using configured tools, there is no equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI environment" behavior. As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration options, difftool.guiDefault and mergetool.guiDefault, supporting a special value "auto" which causes the corresponding tool or guitool to be selected depending on the presence of a non-empty DISPLAY value. Also support "true" to say "default to the guitool (unless --no-gui is passed on the commandline)", and "false" as the previous default behavior when these new configuration options are not specified. Signed-off-by: Tao Klerks <tao@klerks.biz> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-03-18 23:27:43 +08:00
else if (use_gui_tool == 0)
setenv("GIT_MERGETOOL_GUI", "false", 1);
if (difftool_cmd) {
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (*difftool_cmd)
setenv("GIT_DIFF_TOOL", difftool_cmd, 1);
else
die(_("no <tool> given for --tool=<tool>"));
}
if (extcmd) {
if (*extcmd)
setenv("GIT_DIFFTOOL_EXTCMD", extcmd, 1);
else
die(_("no <cmd> given for --extcmd=<cmd>"));
}
setenv("GIT_DIFFTOOL_TRUST_EXIT_CODE",
trust_exit_code ? "true" : "false", 1);
/*
* In directory diff mode, 'git-difftool--helper' is called once
* to compare the a / b directories. In file diff mode, 'git diff'
* will invoke a separate instance of 'git-difftool--helper' for
* each file that changed.
*/
strvec_push(&child.args, "diff");
if (no_index)
strvec_push(&child.args, "--no-index");
if (dir_diff)
strvec_pushl(&child.args, "--raw", "--no-abbrev", "-z", NULL);
strvec_pushv(&child.args, argv);
difftool: implement the functionality in the builtin This patch gives life to the skeleton added in the previous patch. The motivation for converting the difftool is that Perl scripts are not at all native on Windows, and that `git difftool` therefore is pretty slow on that platform, when there is no good reason for it to be slow. In addition, Perl does not really have access to Git's internals. That means that any script will always have to jump through unnecessary hoops, and it will often need to perform unnecessary work (e.g. when reading the entire config every time `git config` is called to query a single config value). The current version of the builtin difftool does not, however, make full use of the internals but instead chooses to spawn a couple of Git processes, still, to make for an easier conversion. There remains a lot of room for improvement, left later. Note: to play it safe, the original difftool is still called unless the config setting difftool.useBuiltin is set to true. The reason: this new, experimental, builtin difftool was shipped as part of Git for Windows v2.11.0, to allow for easier large-scale testing, but of course as an opt-in feature. The speedup is actually more noticable on Linux than on Windows: a quick test shows that t7800-difftool.sh runs in (2.183s/0.052s/0.108s) (real/user/sys) in a Linux VM, down from (6.529s/3.112s/0.644s), while on Windows, it is (36.064s/2.730s/7.194s), down from (47.637s/2.407s/6.863s). The culprit is most likely the overhead incurred from *still* having to shell out to mergetool-lib.sh and difftool--helper.sh. Still, it is an improvement. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-20 04:30:36 +08:00
if (dir_diff)
return run_dir_diff(extcmd, symlinks, prefix, &child);
return run_file_diff(prompt, prefix, &child);
}