git/pager.c

164 lines
3.3 KiB
C
Raw Normal View History

#include "cache.h"
#include "run-command.h"
#include "sigchain.h"
#ifndef DEFAULT_PAGER
#define DEFAULT_PAGER "less"
#endif
/*
* This is split up from the rest of git so that we can do
* something different on Windows.
*/
static const char *pager_argv[] = { NULL, NULL };
static struct child_process pager_process = CHILD_PROCESS_INIT;
static void wait_for_pager(void)
{
fflush(stdout);
fflush(stderr);
/* signal EOF to pager */
close(1);
close(2);
finish_command(&pager_process);
}
static void wait_for_pager_signal(int signo)
{
wait_for_pager();
sigchain_pop(signo);
raise(signo);
}
const char *git_pager(int stdout_is_tty)
{
const char *pager;
if (!stdout_is_tty)
return NULL;
pager = getenv("GIT_PAGER");
if (!pager) {
if (!pager_program)
git_config(git_default_config, NULL);
pager = pager_program;
}
if (!pager)
pager = getenv("PAGER");
if (!pager)
pager = DEFAULT_PAGER;
if (!*pager || !strcmp(pager, "cat"))
pager = NULL;
return pager;
}
void setup_pager(void)
{
const char *pager = git_pager(isatty(1));
if (!pager)
return;
/*
* force computing the width of the terminal before we redirect
* the standard output to the pager.
*/
(void) term_columns();
setenv("GIT_PAGER_IN_USE", "true", 1);
/* spawn the pager */
pager_argv[0] = pager;
pager_process.use_shell = 1;
pager_process.argv = pager_argv;
pager_process.in = -1;
if (!getenv("LESS"))
argv_array_push(&pager_process.env_array, "LESS=FRX");
if (!getenv("LV"))
argv_array_push(&pager_process.env_array, "LV=-c");
if (start_command(&pager_process))
return;
/* original process continues, but writes to the pipe */
dup2(pager_process.in, 1);
if (isatty(2))
dup2(pager_process.in, 2);
close(pager_process.in);
/* this makes sure that the parent terminates after the pager */
sigchain_push_common(wait_for_pager_signal);
atexit(wait_for_pager);
}
int pager_in_use(void)
{
const char *env;
env = getenv("GIT_PAGER_IN_USE");
return env ? git_config_bool("GIT_PAGER_IN_USE", env) : 0;
}
/*
* Return cached value (if set) or $COLUMNS environment variable (if
* set and positive) or ioctl(1, TIOCGWINSZ).ws_col (if positive),
* and default to 80 if all else fails.
*/
int term_columns(void)
{
static int term_columns_at_startup;
char *col_string;
int n_cols;
if (term_columns_at_startup)
return term_columns_at_startup;
term_columns_at_startup = 80;
col_string = getenv("COLUMNS");
if (col_string && (n_cols = atoi(col_string)) > 0)
term_columns_at_startup = n_cols;
#ifdef TIOCGWINSZ
else {
struct winsize ws;
if (!ioctl(1, TIOCGWINSZ, &ws) && ws.ws_col)
term_columns_at_startup = ws.ws_col;
}
#endif
return term_columns_at_startup;
}
/*
* How many columns do we need to show this number in decimal?
*/
decimal_width: avoid integer overflow The decimal_width function originally appeared in blame.c as "lineno_width", and was designed for calculating the print-width of small-ish integer values (line numbers in text files). In ec7ff5b, it was made into a reusable function, and in dc801e7, we started using it to align diffstats. Binary files in a diffstat show byte counts rather than line numbers, meaning they can be quite large (e.g., consider adding or removing a 2GB file). decimal_width is not up to the challenge for two reasons: 1. It takes the value as an "int", whereas large files may easily surpass this. The value may be truncated, in which case we will produce an incorrect value. 2. It counts "up" by repeatedly multiplying another integer by 10 until it surpasses the value. This can cause an infinite loop when the value is close to the largest representable integer. For example, consider using a 32-bit signed integer, and a value of 2,140,000,000 (just shy of 2^31-1). We will count up and eventually see that 1,000,000,000 is smaller than our value. The next step would be to multiply by 10 and see that 10,000,000,000 is too large, ending the loop. But we can't represent that value, and we have signed overflow. This is technically undefined behavior, but a common behavior is to lose the high bits, in which case our iterator will certainly be less than the number. So we'll keep multiplying, overflow again, and so on. This patch changes the argument to a uintmax_t (the same type we use to store the diffstat information for binary filese), and counts "down" by repeatedly dividing our value by 10. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-05 16:14:19 +08:00
int decimal_width(uintmax_t number)
{
decimal_width: avoid integer overflow The decimal_width function originally appeared in blame.c as "lineno_width", and was designed for calculating the print-width of small-ish integer values (line numbers in text files). In ec7ff5b, it was made into a reusable function, and in dc801e7, we started using it to align diffstats. Binary files in a diffstat show byte counts rather than line numbers, meaning they can be quite large (e.g., consider adding or removing a 2GB file). decimal_width is not up to the challenge for two reasons: 1. It takes the value as an "int", whereas large files may easily surpass this. The value may be truncated, in which case we will produce an incorrect value. 2. It counts "up" by repeatedly multiplying another integer by 10 until it surpasses the value. This can cause an infinite loop when the value is close to the largest representable integer. For example, consider using a 32-bit signed integer, and a value of 2,140,000,000 (just shy of 2^31-1). We will count up and eventually see that 1,000,000,000 is smaller than our value. The next step would be to multiply by 10 and see that 10,000,000,000 is too large, ending the loop. But we can't represent that value, and we have signed overflow. This is technically undefined behavior, but a common behavior is to lose the high bits, in which case our iterator will certainly be less than the number. So we'll keep multiplying, overflow again, and so on. This patch changes the argument to a uintmax_t (the same type we use to store the diffstat information for binary filese), and counts "down" by repeatedly dividing our value by 10. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-05 16:14:19 +08:00
int width;
decimal_width: avoid integer overflow The decimal_width function originally appeared in blame.c as "lineno_width", and was designed for calculating the print-width of small-ish integer values (line numbers in text files). In ec7ff5b, it was made into a reusable function, and in dc801e7, we started using it to align diffstats. Binary files in a diffstat show byte counts rather than line numbers, meaning they can be quite large (e.g., consider adding or removing a 2GB file). decimal_width is not up to the challenge for two reasons: 1. It takes the value as an "int", whereas large files may easily surpass this. The value may be truncated, in which case we will produce an incorrect value. 2. It counts "up" by repeatedly multiplying another integer by 10 until it surpasses the value. This can cause an infinite loop when the value is close to the largest representable integer. For example, consider using a 32-bit signed integer, and a value of 2,140,000,000 (just shy of 2^31-1). We will count up and eventually see that 1,000,000,000 is smaller than our value. The next step would be to multiply by 10 and see that 10,000,000,000 is too large, ending the loop. But we can't represent that value, and we have signed overflow. This is technically undefined behavior, but a common behavior is to lose the high bits, in which case our iterator will certainly be less than the number. So we'll keep multiplying, overflow again, and so on. This patch changes the argument to a uintmax_t (the same type we use to store the diffstat information for binary filese), and counts "down" by repeatedly dividing our value by 10. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-05 16:14:19 +08:00
for (width = 1; number >= 10; width++)
number /= 10;
return width;
}
/* returns 0 for "no pager", 1 for "use pager", and -1 for "not specified" */
int check_pager_config(const char *cmd)
{
int want = -1;
struct strbuf key = STRBUF_INIT;
const char *value = NULL;
strbuf_addf(&key, "pager.%s", cmd);
if (!git_config_get_value(key.buf, &value)) {
int b = git_config_maybe_bool(key.buf, value);
if (b >= 0)
want = b;
else {
want = 1;
pager_program = xstrdup(value);
}
}
strbuf_release(&key);
return want;
}