mirrors/git
0
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-11-29 04:54:56 +08:00
Code Issues Packages Projects Releases Wiki Activity
4f8f03d643
git/Documentation/user-manual.txt

3976 lines
145 KiB
Plaintext
Raw Normal View History

Mention version 1.5.1 in tutorial and user-manual Most other documentation will frequently be read from an installation of git so will naturally be associated with the installed version. But these two documents in particular are often read from web pages while users are still exploring git. It's important to mention version 1.5.1 since these documents provide example commands that won't work with previous versions of git. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-05 02:27:10 +08:00
Git User's Manual (for version 1.5.1 or newer)
______________________________________________
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: introduce git Well, we should say at least something about what git is. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 14:23:11 +08:00
Git is a fast distributed revision control system.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
This manual is designed to be readable by someone with basic unix
Fix minor typos/grammar in user-manual.txt Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28 12:13:09 +08:00
command-line skills, but no previous knowledge of git.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: move quick-start to an appendix The quick start interrupts the flow of the manual a bit. Move it to "appendix A" but add a reference to it in the preface. Also rename the todo chapter to "appendix B", and revise the preface a little. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 10:55:40 +08:00
<<repositories-and-branches>> and <<exploring-git-history>> explain how
to fetch and study a project using git--read these chapters to learn how
to build and test a particular version of a software project, search for
regressions, and so on.
user-manual: add "quick start" as chapter 1 Add a "quick start" guide, modelled after Mercurial's, as the first chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-21 10:41:48 +08:00
user-manual: move quick-start to an appendix The quick start interrupts the flow of the manual a bit. Move it to "appendix A" but add a reference to it in the preface. Also rename the todo chapter to "appendix B", and revise the preface a little. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 10:55:40 +08:00
People needing to do actual development will also want to read
<<Developing-with-git>> and <<sharing-development>>.
Documentation: expand preface and todo's Add a brief description of the organization to the preface, expand the final notes/todo's section, in hopes maybe some others will want to contribute. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 11:58:14 +08:00
Further chapters cover more specialized topics.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Comprehensive reference documentation is available through the man
pages. For a command such as "git clone", just use
------------------------------------------------
$ man git-clone
------------------------------------------------
user-manual: move quick-start to an appendix The quick start interrupts the flow of the manual a bit. Move it to "appendix A" but add a reference to it in the preface. Also rename the todo chapter to "appendix B", and revise the preface a little. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 10:55:40 +08:00
See also <<git-quick-start>> for a brief overview of git commands,
without any explanation.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: quick-start updates Update text to reflect new position in appendix. Update the name to reflect the fact that this is closer to reference than tutorial documentation (as suggested by Jonas Fonseca). Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-06 06:33:27 +08:00
Finally, see <<todo>> for ways that you can help make this manual more
user-manual: move quick-start to an appendix The quick start interrupts the flow of the manual a bit. Move it to "appendix A" but add a reference to it in the preface. Also rename the todo chapter to "appendix B", and revise the preface a little. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 10:55:40 +08:00
complete.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[repositories-and-branches]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Repositories and Branches
=========================
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[how-to-get-a-git-repository]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
How to get a git repository
---------------------------
It will be useful to have a git repository to experiment with as you
read this manual.
The best way to get one is by using the gitlink:git-clone[1] command
to download a copy of an existing repository for a project that you
are interested in. If you don't already have a project in mind, here
are some interesting examples:
------------------------------------------------
# git itself (approx. 10MB download):
$ git clone git://git.kernel.org/pub/scm/git/git.git
# the linux kernel (approx. 150MB download):
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
------------------------------------------------
The initial clone may be time-consuming for a large project, but you
will only need to clone once.
The clone command creates a new directory named after the project
("git" or "linux-2.6" in the examples above). After you cd into this
directory, you will see that it contains a copy of the project files,
together with a special top-level directory named ".git", which
contains all the information about the history of the project.
Documentation: begin discussion of git-remote in user manual Start discussion of git-remote. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 13:18:09 +08:00
In most of the following, examples will be taken from one of the two
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
repositories above.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[how-to-check-out]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
How to check out a different version of a project
-------------------------------------------------
Git is best thought of as a tool for storing the history of a
collection of files. It stores the history as a compressed
collection of interrelated snapshots (versions) of the project's
contents.
user-manual: introduce "branch" and "branch head" differently I was using "branch" to mean "head", but that's perhaps a little sloppy; so instead start by using the terms "branch head" and "head", while still quickly falling back on "branch", since that's what people actually say more frequently. Also include glossary references on the first uses of "head" and "tag". Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-19 11:02:14 +08:00
A single git repository may contain multiple branches. It keeps track
of them by keeping a list of <<def_head,heads>> which reference the
latest version on each branch; the gitlink:git-branch[1] command shows
you the list of branch heads:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
------------------------------------------------
$ git branch
* master
------------------------------------------------
user-manual: fix discussion of default clone The name "master" isn't actually quite so special. Also, fix some bad grammar. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:13 +08:00
A freshly cloned repository contains a single branch head, by default
named "master", with the working directory initialized to the state of
the project referred to by that branch head.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: introduce "branch" and "branch head" differently I was using "branch" to mean "head", but that's perhaps a little sloppy; so instead start by using the terms "branch head" and "head", while still quickly falling back on "branch", since that's what people actually say more frequently. Also include glossary references on the first uses of "head" and "tag". Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-19 11:02:14 +08:00
Most projects also use <<def_tag,tags>>. Tags, like heads, are
references into the project's history, and can be listed using the
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
gitlink:git-tag[1] command:
------------------------------------------------
$ git tag -l
v2.6.11
v2.6.11-tree
v2.6.12
v2.6.12-rc2
v2.6.12-rc3
v2.6.12-rc4
v2.6.12-rc5
v2.6.12-rc6
v2.6.13
...
------------------------------------------------
user-manual: clarify difference between tag and branch Explain the difference (well, one of the differences) between a tag and a branch. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 11:14:39 +08:00
Tags are expected to always point at the same version of a project,
user-manual: introduce "branch" and "branch head" differently I was using "branch" to mean "head", but that's perhaps a little sloppy; so instead start by using the terms "branch head" and "head", while still quickly falling back on "branch", since that's what people actually say more frequently. Also include glossary references on the first uses of "head" and "tag". Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-19 11:02:14 +08:00
while heads are expected to advance as development progresses.
user-manual: clarify difference between tag and branch Explain the difference (well, one of the differences) between a tag and a branch. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 11:14:39 +08:00
user-manual: introduce "branch" and "branch head" differently I was using "branch" to mean "head", but that's perhaps a little sloppy; so instead start by using the terms "branch head" and "head", while still quickly falling back on "branch", since that's what people actually say more frequently. Also include glossary references on the first uses of "head" and "tag". Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-19 11:02:14 +08:00
Create a new branch head pointing to one of these versions and check it
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
out using gitlink:git-checkout[1]:
------------------------------------------------
$ git checkout -b new v2.6.13
------------------------------------------------
The working directory then reflects the contents that the project had
when it was tagged v2.6.13, and gitlink:git-branch[1] shows two
branches, with an asterisk marking the currently checked-out branch:
------------------------------------------------
$ git branch
master
* new
------------------------------------------------
If you decide that you'd rather see version 2.6.17, you can modify
the current branch to point at v2.6.17 instead, with
------------------------------------------------
$ git reset --hard v2.6.17
------------------------------------------------
user-manual: introduce "branch" and "branch head" differently I was using "branch" to mean "head", but that's perhaps a little sloppy; so instead start by using the terms "branch head" and "head", while still quickly falling back on "branch", since that's what people actually say more frequently. Also include glossary references on the first uses of "head" and "tag". Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-19 11:02:14 +08:00
Note that if the current branch head was your only reference to a
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
particular point in history, then resetting that branch may leave you
user-manual: introduce "branch" and "branch head" differently I was using "branch" to mean "head", but that's perhaps a little sloppy; so instead start by using the terms "branch head" and "head", while still quickly falling back on "branch", since that's what people actually say more frequently. Also include glossary references on the first uses of "head" and "tag". Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-19 11:02:14 +08:00
with no way to find the history it used to point to; so use this command
carefully.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[understanding-commits]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Understanding History: Commits
------------------------------
Every change in the history of a project is represented by a commit.
The gitlink:git-show[1] command shows the most recent commit on the
current branch:
------------------------------------------------
$ git show
commit 2b5f6dcce5bf94b9b119e9ed8d537098ec61c3d2
Author: Jamal Hadi Salim <hadi@cyberus.ca>
Date: Sat Dec 2 22:22:25 2006 -0800
[XFRM]: Fix aevent structuring to be more complete.
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
aevents can not uniquely identify an SA. We break the ABI with this
patch, but consensus is that since it is not yet utilized by any
(known) application then it is fine (better do it now than later).
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/networking/xfrm_sync.txt b/Documentation/networking/xfrm_sync.txt
index 8be626f..d7aac9d 100644
--- a/Documentation/networking/xfrm_sync.txt
+++ b/Documentation/networking/xfrm_sync.txt
@@ -47,10 +47,13 @@ aevent_id structure looks like:
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
struct xfrm_aevent_id {
struct xfrm_usersa_id sa_id;
+ xfrm_address_t saddr;
__u32 flags;
+ __u32 reqid;
};
...
------------------------------------------------
As you can see, a commit shows who made the latest change, what they
did, and why.
user-manual: insert earlier of mention content-addressable architecture The content-addressable design is too important not to be worth at least a brief mention a little earlier on. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 03:04:42 +08:00
Every commit has a 40-hexdigit id, sometimes called the "object name" or the
"SHA1 id", shown on the first line of the "git show" output. You can usually
refer to a commit by a shorter name, such as a tag or a branch name, but this
longer name can also be useful. Most importantly, it is a globally unique
name for this commit: so if you tell somebody else the object name (for
example in email), then you are guaranteed that name will refer to the same
commit in their repository that it does in yours (assuming their repository
has that commit at all). Since the object name is computed as a hash over the
contents of the commit, you are guaranteed that the commit can never change
without its name also changing.
In fact, in <<git-internals>> we shall see that everything stored in git
history, including file data and directory contents, is stored in an object
with a name that is a hash of its contents.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[understanding-reachability]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Understanding history: commits, parents, and reachability
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Every commit (except the very first commit in a project) also has a
parent commit which shows what happened before this commit.
Following the chain of parents will eventually take you back to the
beginning of the project.
However, the commits do not form a simple list; git allows lines of
development to diverge and then reconverge, and the point where two
lines of development reconverge is called a "merge". The commit
representing a merge can therefore have more than one parent, with
each parent representing the most recent commit on one of the lines
of development leading to that point.
The best way to see how this works is using the gitlink:gitk[1]
command; running gitk now on a git repository and looking for merge
commits will help understand how the git organizes history.
In the following, we say that commit X is "reachable" from commit Y
if commit X is an ancestor of commit Y. Equivalently, you could say
that Y is a descendent of X, or that there is a chain of parents
leading from commit Y to commit X.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[history-diagrams]]
Assorted typo fixes Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-04 12:49:16 +08:00
Understanding history: History diagrams
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
We will sometimes represent git history using diagrams like the one
below. Commits are shown as "o", and the links between them with
lines drawn with - / and \. Time goes left to right:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
o--o--o <-- Branch A
/
o--o--o <-- master
\
o--o--o <-- Branch B
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
If we need to talk about a particular commit, the character "o" may
be replaced with another letter or number.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[what-is-a-branch]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Understanding history: What is a branch?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
user-manual: introduce "branch" and "branch head" differently I was using "branch" to mean "head", but that's perhaps a little sloppy; so instead start by using the terms "branch head" and "head", while still quickly falling back on "branch", since that's what people actually say more frequently. Also include glossary references on the first uses of "head" and "tag". Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-19 11:02:14 +08:00
When we need to be precise, we will use the word "branch" to mean a line
of development, and "branch head" (or just "head") to mean a reference
to the most recent commit on a branch. In the example above, the branch
head named "A" is a pointer to one particular commit, but we refer to
the line of three commits leading up to that point as all being part of
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
"branch A".
user-manual: introduce "branch" and "branch head" differently I was using "branch" to mean "head", but that's perhaps a little sloppy; so instead start by using the terms "branch head" and "head", while still quickly falling back on "branch", since that's what people actually say more frequently. Also include glossary references on the first uses of "head" and "tag". Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-19 11:02:14 +08:00
However, when no confusion will result, we often just use the term
"branch" both for branches and for branch heads.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[manipulating-branches]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Manipulating branches
---------------------
Creating, deleting, and modifying branches is quick and easy; here's
a summary of the commands:
git branch::
list all branches
git branch <branch>::
create a new branch named <branch>, referencing the same
point in history as the current branch
git branch <branch> <start-point>::
create a new branch named <branch>, referencing
<start-point>, which may be specified any way you like,
including using a branch name or a tag name
git branch -d <branch>::
delete the branch <branch>; if the branch you are deleting
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
points to a commit which is not reachable from the current
branch, this command will fail with a warning.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
git branch -D <branch>::
even if the branch points to a commit not reachable
from the current branch, you may know that that commit
is still reachable from some other branch or tag. In that
case it is safe to use this command to force git to delete
the branch.
git checkout <branch>::
make the current branch <branch>, updating the working
directory to reflect the version referenced by <branch>
git checkout -b <new> <start-point>::
create a new branch <new> referencing <start-point>, and
check it out.
user-manual: detached HEAD Add a brief mention of detached HEADs and .git/HEAD. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:14 +08:00
The special symbol "HEAD" can always be used to refer to the current
branch. In fact, git uses a file named "HEAD" in the .git directory to
remember which branch is current:
------------------------------------------------
$ cat .git/HEAD
ref: refs/heads/master
------------------------------------------------
user-manual: use detached head when rewriting history This is slightly simpler if we use a detached head. And it's probably good to have another example that uses this feature. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:16 +08:00
[[detached-head]]
user-manual: detached HEAD Add a brief mention of detached HEADs and .git/HEAD. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:14 +08:00
Examining an old version without creating a new branch
------------------------------------------------------
The git-checkout command normally expects a branch head, but will also
accept an arbitrary commit; for example, you can check out the commit
referenced by a tag:
------------------------------------------------
$ git checkout v2.6.17
Note: moving to "v2.6.17" which isn't a local branch
If you want to create a new branch from this checkout, you may do so
(now or later) by using -b with the checkout command again. Example:
git checkout -b <new_branch_name>
HEAD is now at 427abfa... Linux v2.6.17
------------------------------------------------
The HEAD then refers to the SHA1 of the commit instead of to a branch,
and git branch shows that you are no longer on a branch:
------------------------------------------------
$ cat .git/HEAD
427abfa28afedffadfca9dd8b067eb6d36bac53f
user-manual: more discussion of detached heads, fix typos Nicolas Pitre pointed out a couple typos and some room for improvement in the discussion of detached heads. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Cc: Nicolas Pitre <nico@cam.org>
2007-04-18 12:20:46 +08:00
$ git branch
user-manual: detached HEAD Add a brief mention of detached HEADs and .git/HEAD. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:14 +08:00
* (no branch)
master
------------------------------------------------
In this case we say that the HEAD is "detached".
user-manual: more discussion of detached heads, fix typos Nicolas Pitre pointed out a couple typos and some room for improvement in the discussion of detached heads. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Cc: Nicolas Pitre <nico@cam.org>
2007-04-18 12:20:46 +08:00
This is an easy way to check out a particular version without having to
make up a name for the new branch. You can still create a new branch
(or tag) for this version later if you decide to.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[examining-remote-branches]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Examining branches from a remote repository
-------------------------------------------
The "master" branch that was created at the time you cloned is a copy
of the HEAD in the repository that you cloned from. That repository
may also have had other branches, though, and your local repository
keeps branches which track each of those remote branches, which you
can view using the "-r" option to gitlink:git-branch[1]:
------------------------------------------------
$ git branch -r
origin/HEAD
origin/html
origin/maint
origin/man
origin/master
origin/next
origin/pu
origin/todo
------------------------------------------------
You cannot check out these remote-tracking branches, but you can
examine them on a branch of your own, just as you would a tag:
------------------------------------------------
$ git checkout -b my-todo-copy origin/todo
------------------------------------------------
Note that the name "origin" is just the name that git uses by default
to refer to the repository that you cloned from.
[[how-git-stores-references]]
user-manual: update references discussion Since references may be packed, it's no longer as helpful to introduce references as paths relative to .git. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 11:31:07 +08:00
Naming branches, tags, and other references
-------------------------------------------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Branches, remote-tracking branches, and tags are all references to
user-manual: update references discussion Since references may be packed, it's no longer as helpful to introduce references as paths relative to .git. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 11:31:07 +08:00
commits. All references are named with a slash-separated path name
starting with "refs"; the names we've been using so far are actually
shorthand:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: update references discussion Since references may be packed, it's no longer as helpful to introduce references as paths relative to .git. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 11:31:07 +08:00
- The branch "test" is short for "refs/heads/test".
- The tag "v2.6.18" is short for "refs/tags/v2.6.18".
- "origin/master" is short for "refs/remotes/origin/master".
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: update references discussion Since references may be packed, it's no longer as helpful to introduce references as paths relative to .git. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 11:31:07 +08:00
The full name is occasionally useful if, for example, there ever
exists a tag and a branch with the same name.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
As another useful shortcut, the "HEAD" of a repository can be referred
to just using the name of that repository. So, for example, "origin"
is usually a shortcut for the HEAD branch in the repository "origin".
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
For the complete list of paths which git checks for references, and
user-manual: update references discussion Since references may be packed, it's no longer as helpful to introduce references as paths relative to .git. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 11:31:07 +08:00
the order it uses to decide which to choose when there are multiple
references with the same shorthand name, see the "SPECIFYING
REVISIONS" section of gitlink:git-rev-parse[1].
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
[[Updating-a-repository-with-git-fetch]]
Updating a repository with git fetch
------------------------------------
Eventually the developer cloned from will do additional work in her
repository, creating new commits and advancing the branches to point
at the new commits.
The command "git fetch", with no arguments, will update all of the
remote-tracking branches to the latest version found in her
repository. It will not touch any of your own branches--not even the
"master" branch that was created for you on clone.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[fetching-branches]]
Documentation: begin discussion of git-remote in user manual Start discussion of git-remote. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 13:18:09 +08:00
Fetching branches from other repositories
-----------------------------------------
You can also track branches from repositories other than the one you
cloned from, using gitlink:git-remote[1]:
-------------------------------------------------
$ git remote add linux-nfs git://linux-nfs.org/pub/nfs-2.6.git
Documentation: A few minor fixes to Git User's Manual Mainly consistent usage of "git command" and not "git-command" syntax Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-04 00:27:28 +08:00
$ git fetch linux-nfs
Documentation: begin discussion of git-remote in user manual Start discussion of git-remote. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 13:18:09 +08:00
* refs/remotes/linux-nfs/master: storing branch 'master' ...
commit: bf81b46
-------------------------------------------------
New remote-tracking branches will be stored under the shorthand name
that you gave "git remote add", in this case linux-nfs:
-------------------------------------------------
$ git branch -r
linux-nfs/master
origin/master
-------------------------------------------------
If you run "git fetch <remote>" later, the tracking branches for the
named <remote> will be updated.
If you examine the file .git/config, you will see that git has added
a new stanza:
-------------------------------------------------
$ cat .git/config
...
[remote "linux-nfs"]
user-manual: fix inconsistent example The configuration file fragment here is inconsistent with the text above. Thanks to Ramsay Jones for the correction. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 10:45:29 +08:00
url = git://linux-nfs.org/pub/nfs-2.6.git
fetch = +refs/heads/*:refs/remotes/linux-nfs/*
Documentation: begin discussion of git-remote in user manual Start discussion of git-remote. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 13:18:09 +08:00
...
-------------------------------------------------
user-manual: add references to git-config man page Direct editing of config files may be more natural for users than using the git-config commandline; but we should still reference the git-config man page when we describe such editing, so people know where to go for details on the config file syntax and meanings of the variables. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 13:17:51 +08:00
This is what causes git to track the remote's branches; you may modify
or delete these configuration options by editing .git/config with a
text editor. (See the "CONFIGURATION FILE" section of
gitlink:git-config[1] for details.)
Documentation: begin discussion of git-remote in user manual Start discussion of git-remote. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 13:18:09 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[exploring-git-history]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Exploring git history
=====================
Git is best thought of as a tool for storing the history of a
collection of files. It does this by storing compressed snapshots of
user-manual: fix typolets. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-24 16:58:51 +08:00
the contents of a file hierarchy, together with "commits" which show
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
the relationships between these snapshots.
Git provides extremely flexible and fast tools for exploring the
history of a project.
Fix some documentation typos and grammar Also suggest user manual mention .gitignore. Signed-off-by: Michael Coleman <tutufan@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-02 14:25:30 +08:00
We start with one specialized tool that is useful for finding the
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
commit that introduced a bug into a project.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[using-bisect]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
How to use bisect to find a regression
--------------------------------------
Suppose version 2.6.18 of your project worked, but the version at
"master" crashes. Sometimes the best way to find the cause of such a
regression is to perform a brute-force search through the project's
history to find the particular commit that caused the problem. The
gitlink:git-bisect[1] command can help you do this:
-------------------------------------------------
$ git bisect start
$ git bisect good v2.6.18
$ git bisect bad master
Bisecting: 3537 revisions left to test after this
[65934a9a028b88e83e2b0f8b36618fe503349f8e] BLOCK: Make USB storage depend on SCSI rather than selecting it [try #6]
-------------------------------------------------
If you run "git branch" at this point, you'll see that git has
temporarily moved you to a new branch named "bisect". This branch
points to a commit (with commit id 65934...) that is reachable from
v2.6.19 but not from v2.6.18. Compile and test it, and see whether
it crashes. Assume it does crash. Then:
-------------------------------------------------
$ git bisect bad
Bisecting: 1769 revisions left to test after this
[7eff82c8b1511017ae605f0c99ac275a7e21b867] i2c-core: Drop useless bitmaskings
-------------------------------------------------
checks out an older version. Continue like this, telling git at each
stage whether the version it gives you is good or bad, and notice
that the number of revisions left to test is cut approximately in
half each time.
After about 13 tests (in this case), it will output the commit id of
the guilty commit. You can then examine the commit with
gitlink:git-show[1], find out who wrote it, and mail them your bug
report with the commit id. Finally, run
-------------------------------------------------
$ git bisect reset
-------------------------------------------------
to return you to the branch you were on before and delete the
temporary "bisect" branch.
Note that the version which git-bisect checks out for you at each
point is just a suggestion, and you're free to try a different
version if you think it would be a good idea. For example,
occasionally you may land on a commit that broke something unrelated;
run
-------------------------------------------------
Documentation: A few minor fixes to Git User's Manual Mainly consistent usage of "git command" and not "git-command" syntax Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-04 00:27:28 +08:00
$ git bisect visualize
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
which will run gitk and label the commit it chose with a marker that
says "bisect". Chose a safe-looking commit nearby, note its commit
id, and check it out with:
-------------------------------------------------
$ git reset --hard fb47ddb2db...
-------------------------------------------------
then test, run "bisect good" or "bisect bad" as appropriate, and
continue.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[naming-commits]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Naming commits
--------------
We have seen several ways of naming commits already:
user-manual: SHA1 -> object name Prefer "object name" to SHA1, at least in higher level documentation. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 15:16:45 +08:00
- 40-hexdigit object name
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
- branch name: refers to the commit at the head of the given
branch
- tag name: refers to the commit pointed to by the given tag
(we've seen branches and tags are special cases of
<<how-git-stores-references,references>>).
- HEAD: refers to the head of the current branch
User manual: fix typos in examples Correct command line examples of repo-config, format-patch and am. A full object name is 40-hexdigit; it may be 20-byte but 20-digit is misleading. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-11 10:11:53 +08:00
There are many more; see the "SPECIFYING REVISIONS" section of the
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
gitlink:git-rev-parse[1] man page for the complete list of ways to
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
name revisions. Some examples:
-------------------------------------------------
user-manual: SHA1 -> object name Prefer "object name" to SHA1, at least in higher level documentation. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 15:16:45 +08:00
$ git show fb47ddb2 # the first few characters of the object name
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
# are usually enough to specify it uniquely
$ git show HEAD^ # the parent of the HEAD commit
$ git show HEAD^^ # the grandparent
$ git show HEAD~4 # the great-great-grandparent
-------------------------------------------------
Recall that merge commits may have more than one parent; by default,
^ and ~ follow the first parent listed in the commit, but you can
also choose:
-------------------------------------------------
$ git show HEAD^1 # show the first parent of HEAD
$ git show HEAD^2 # show the second parent of HEAD
-------------------------------------------------
In addition to HEAD, there are several other special names for
commits:
Merges (to be discussed later), as well as operations such as
git-reset, which change the currently checked-out commit, generally
set ORIG_HEAD to the value HEAD had before the current operation.
The git-fetch operation always stores the head of the last fetched
branch in FETCH_HEAD. For example, if you run git fetch without
specifying a local branch as the target of the operation
-------------------------------------------------
$ git fetch git://example.com/proj.git theirbranch
-------------------------------------------------
the fetched commits will still be available from FETCH_HEAD.
When we discuss merges we'll also see the special name MERGE_HEAD,
which refers to the other branch that we're merging in to the current
branch.
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
The gitlink:git-rev-parse[1] command is a low-level command that is
user-manual: SHA1 -> object name Prefer "object name" to SHA1, at least in higher level documentation. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 15:16:45 +08:00
occasionally useful for translating some name for a commit to the object
name for that commit:
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
-------------------------------------------------
$ git rev-parse origin
e05db0fd4f31dde7005f075a84f96b360d05984b
-------------------------------------------------
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[creating-tags]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Creating tags
-------------
We can also create a tag to refer to a particular commit; after
running
-------------------------------------------------
Documentation: A few minor fixes to Git User's Manual Mainly consistent usage of "git command" and not "git-command" syntax Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-04 00:27:28 +08:00
$ git tag stable-1 1b2e1d63ff
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
You can use stable-1 to refer to the commit 1b2e1d63ff.
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
This creates a "lightweight" tag. If you would also like to include a
comment with the tag, and possibly sign it cryptographically, then you
should create a tag object instead; see the gitlink:git-tag[1] man page
for details.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[browsing-revisions]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Browsing revisions
------------------
The gitlink:git-log[1] command can show lists of commits. On its
own, it shows all commits reachable from the parent commit; but you
can also make more specific requests:
-------------------------------------------------
$ git log v2.5.. # commits since (not reachable from) v2.5
$ git log test..master # commits reachable from master but not test
$ git log master..test # ...reachable from test but not master
$ git log master...test # ...reachable from either test or master,
# but not both
$ git log --since="2 weeks ago" # commits from the last 2 weeks
$ git log Makefile # commits which modify Makefile
$ git log fs/ # ... which modify any file under fs/
$ git log -S'foo()' # commits which add or remove any file data
# matching the string 'foo()'
-------------------------------------------------
And of course you can combine all of these; the following finds
commits since v2.5 which touch the Makefile or any file under fs:
-------------------------------------------------
$ git log v2.5.. Makefile fs/
-------------------------------------------------
You can also ask git log to show patches:
-------------------------------------------------
$ git log -p
-------------------------------------------------
See the "--pretty" option in the gitlink:git-log[1] man page for more
display options.
Note that git log starts with the most recent commit and works
backwards through the parents; however, since git history can contain
Assorted typo fixes Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-04 12:49:16 +08:00
multiple independent lines of development, the particular order that
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
commits are listed in may be somewhat arbitrary.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[generating-diffs]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Generating diffs
----------------
You can generate diffs between any two versions using
gitlink:git-diff[1]:
-------------------------------------------------
$ git diff master..test
-------------------------------------------------
Sometimes what you want instead is a set of patches:
-------------------------------------------------
$ git format-patch master..test
-------------------------------------------------
will generate a file with a patch for each commit reachable from test
but not from master. Note that if master also has commits which are
not reachable from test, then the combined result of these patches
will not be the same as the diff produced by the git-diff example.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[viewing-old-file-versions]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Viewing old file versions
-------------------------
You can always view an old version of a file by just checking out the
correct revision first. But sometimes it is more convenient to be
able to view an old version of a single file without checking
anything out; this command does that:
-------------------------------------------------
$ git show v2.5:fs/locks.c
-------------------------------------------------
Before the colon may be anything that names a commit, and after it
may be any path to a file tracked by git.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[history-examples]]
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
Examples
--------
user-manual: add a "counting commits" example This is partly just an excuse to mention --pretty= and rev-list. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 14:14:45 +08:00
[[counting-commits-on-a-branch]]
Counting the number of commits on a branch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Suppose you want to know how many commits you've made on "mybranch"
since it diverged from "origin":
-------------------------------------------------
$ git log --pretty=oneline origin..mybranch | wc -l
-------------------------------------------------
Alternatively, you may often see this sort of thing done with the
lower-level command gitlink:git-rev-list[1], which just lists the SHA1's
of all the given commits:
-------------------------------------------------
$ git rev-list origin..mybranch | wc -l
-------------------------------------------------
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[checking-for-equal-branches]]
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
Check whether two branches point at the same history
user-manual: rewrap, fix heading levels Fix some heading levels that prevented compile; rewrap some stuff. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-15 11:43:47 +08:00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
Suppose you want to check whether two branches point at the same point
in history.
-------------------------------------------------
$ git diff origin..master
-------------------------------------------------
user-manual: reindent Just some minor reindenting Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-15 05:29:40 +08:00
will tell you whether the contents of the project are the same at the
two branches; in theory, however, it's possible that the same project
contents could have been arrived at by two different historical
user-manual: SHA1 -> object name Prefer "object name" to SHA1, at least in higher level documentation. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 15:16:45 +08:00
routes. You could compare the object names:
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
-------------------------------------------------
$ git rev-list origin
e05db0fd4f31dde7005f075a84f96b360d05984b
$ git rev-list master
e05db0fd4f31dde7005f075a84f96b360d05984b
-------------------------------------------------
user-manual: reindent Just some minor reindenting Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-15 05:29:40 +08:00
Or you could recall that the ... operator selects all commits
contained reachable from either one reference or the other but not
both: so
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
-------------------------------------------------
$ git log origin...master
-------------------------------------------------
will return no commits when the two branches are equal.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[finding-tagged-descendants]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Find first tagged version including a given fix
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
user-manual: reindent Just some minor reindenting Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-15 05:29:40 +08:00
Suppose you know that the commit e05db0fd fixed a certain problem.
You'd like to find the earliest tagged release that contains that
fix.
Of course, there may be more than one answer--if the history branched
after commit e05db0fd, then there could be multiple "earliest" tagged
releases.
You could just visually inspect the commits since e05db0fd:
-------------------------------------------------
$ gitk e05db0fd..
-------------------------------------------------
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Or you can use gitlink:git-name-rev[1], which will give the commit a
name based on any tag it finds pointing to one of the commit's
descendants:
-------------------------------------------------
Documentation: A few minor fixes to Git User's Manual Mainly consistent usage of "git command" and not "git-command" syntax Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-04 00:27:28 +08:00
$ git name-rev --tags e05db0fd
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
e05db0fd tags/v1.5.0-rc1^0~23
-------------------------------------------------
The gitlink:git-describe[1] command does the opposite, naming the
revision using a tag on which the given commit is based:
-------------------------------------------------
$ git describe e05db0fd
Documentation: A few minor fixes to Git User's Manual Mainly consistent usage of "git command" and not "git-command" syntax Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-04 00:27:28 +08:00
v1.5.0-rc0-260-ge05db0f
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
-------------------------------------------------
but that may sometimes help you guess which tags might come after the
given commit.
If you just want to verify whether a given tagged version contains a
given commit, you could use gitlink:git-merge-base[1]:
-------------------------------------------------
$ git merge-base e05db0fd v1.5.0-rc1
e05db0fd4f31dde7005f075a84f96b360d05984b
-------------------------------------------------
The merge-base command finds a common ancestor of the given commits,
and always returns one or the other in the case where one is a
descendant of the other; so the above output shows that e05db0fd
actually is an ancestor of v1.5.0-rc1.
Alternatively, note that
-------------------------------------------------
user-manual: document git-show-branch example Document Junio's show-branch trick for finding out which tags are descendents of a given comit. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:55:33 +08:00
$ git log v1.5.0-rc1..e05db0fd
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
-------------------------------------------------
user-manual: document git-show-branch example Document Junio's show-branch trick for finding out which tags are descendents of a given comit. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:55:33 +08:00
will produce empty output if and only if v1.5.0-rc1 includes e05db0fd,
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
because it outputs only commits that are not reachable from v1.5.0-rc1.
Documentation: rev-list -> rev-parse, other typos, start examples Fix some typos, start adding some more simple examples. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:17:00 +08:00
user-manual: document git-show-branch example Document Junio's show-branch trick for finding out which tags are descendents of a given comit. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:55:33 +08:00
As yet another alternative, the gitlink:git-show-branch[1] command lists
the commits reachable from its arguments with a display on the left-hand
side that indicates which arguments that commit is reachable from. So,
you can run something like
-------------------------------------------------
$ git show-branch e05db0fd v1.5.0-rc0 v1.5.0-rc1 v1.5.0-rc2
! [e05db0fd] Fix warnings in sha1_file.c - use C99 printf format if
available
! [v1.5.0-rc0] GIT v1.5.0 preview
! [v1.5.0-rc1] GIT v1.5.0-rc1
! [v1.5.0-rc2] GIT v1.5.0-rc2
...
-------------------------------------------------
then search for a line that looks like
-------------------------------------------------
+ ++ [e05db0fd] Fix warnings in sha1_file.c - use C99 printf format if
available
-------------------------------------------------
Which shows that e05db0fd is reachable from itself, from v1.5.0-rc1, and
from v1.5.0-rc2, but not from v1.5.0-rc0.
user-manual: listing commits reachable from some refs not others This is just an amusing example raised by someone in irc. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-14 10:58:06 +08:00
[[showing-commits-unique-to-a-branch]]
Showing commits unique to a given branch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
user-manual: document git-show-branch example Document Junio's show-branch trick for finding out which tags are descendents of a given comit. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:55:33 +08:00
user-manual: listing commits reachable from some refs not others This is just an amusing example raised by someone in irc. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-14 10:58:06 +08:00
Suppose you would like to see all the commits reachable from the branch
head named "master" but not from any other head in your repository.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: listing commits reachable from some refs not others This is just an amusing example raised by someone in irc. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-14 10:58:06 +08:00
We can list all the heads in this repository with
gitlink:git-show-ref[1]:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: listing commits reachable from some refs not others This is just an amusing example raised by someone in irc. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-14 10:58:06 +08:00
-------------------------------------------------
$ git show-ref --heads
bf62196b5e363d73353a9dcf094c59595f3153b7 refs/heads/core-tutorial
db768d5504c1bb46f63ee9d6e1772bd047e05bf9 refs/heads/maint
a07157ac624b2524a059a3414e99f6f44bebc1e7 refs/heads/master
24dbc180ea14dc1aebe09f14c8ecf32010690627 refs/heads/tutorial-2
1e87486ae06626c2f31eaa63d26fc0fd646c8af2 refs/heads/tutorial-fixes
-------------------------------------------------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: listing commits reachable from some refs not others This is just an amusing example raised by someone in irc. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-14 10:58:06 +08:00
We can get just the branch-head names, and remove "master", with
the help of the standard utilities cut and grep:
-------------------------------------------------
$ git show-ref --heads | cut -d' ' -f2 | grep -v '^refs/heads/master'
refs/heads/core-tutorial
refs/heads/maint
refs/heads/tutorial-2
refs/heads/tutorial-fixes
-------------------------------------------------
And then we can ask to see all the commits reachable from master
but not from these other heads:
-------------------------------------------------
$ gitk master --not $( git show-ref --heads | cut -d' ' -f2 |
grep -v '^refs/heads/master' )
-------------------------------------------------
Obviously, endless variations are possible; for example, to see all
commits reachable from some head but not from any tag in the repository:
-------------------------------------------------
user-manual: fixed typo in example Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-27 03:16:27 +08:00
$ gitk $( git show-ref --heads ) --not $( git show-ref --tags )
user-manual: listing commits reachable from some refs not others This is just an amusing example raised by someone in irc. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-14 10:58:06 +08:00
-------------------------------------------------
(See gitlink:git-rev-parse[1] for explanations of commit-selecting
syntax such as `--not`.)
user-manual: move howto/make-dist.txt into user manual There seems to be a perception that the howto's are bit-rotting a little. The manual might be a more visible location for some of them, and make-dist.txt seems like a good candidate to include as an example in the manual. For now, incorporate much of it verbatim. Later we may want to update the example a bit. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 12:14:40 +08:00
[[making-a-release]]
Creating a changelog and tarball for a software release
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The gitlink:git-archive[1] command can create a tar or zip archive from
any version of a project; for example:
-------------------------------------------------
$ git archive --format=tar --prefix=project/ HEAD | gzip >latest.tar.gz
-------------------------------------------------
will use HEAD to produce a tar archive in which each filename is
user-manual: fix directory name in git-archive example Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-29 21:08:29 +08:00
preceded by "project/".
user-manual: move howto/make-dist.txt into user manual There seems to be a perception that the howto's are bit-rotting a little. The manual might be a more visible location for some of them, and make-dist.txt seems like a good candidate to include as an example in the manual. For now, incorporate much of it verbatim. Later we may want to update the example a bit. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 12:14:40 +08:00
If you're releasing a new version of a software project, you may want
to simultaneously make a changelog to include in the release
announcement.
Linus Torvalds, for example, makes new kernel releases by tagging them,
then running:
-------------------------------------------------
$ release-script 2.6.12 2.6.13-rc6 2.6.13-rc7
-------------------------------------------------
where release-script is a shell script that looks like:
-------------------------------------------------
#!/bin/sh
stable="$1"
last="$2"
new="$3"
echo "# git tag v$new"
echo "git archive --prefix=linux-$new/ v$new | gzip -9 > ../linux-$new.tar.gz"
echo "git diff v$stable v$new | gzip -9 > ../patch-$new.gz"
echo "git log --no-merges v$new ^v$last > ../ChangeLog-$new"
echo "git shortlog --no-merges v$new ^v$last > ../ShortLog"
echo "git diff --stat --summary -M v$last v$new > ../diffstat-$new"
-------------------------------------------------
and then he just cut-and-pastes the output commands after verifying that
they look OK.
user-manual: document git-show-branch example Document Junio's show-branch trick for finding out which tags are descendents of a given comit. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:55:33 +08:00
user-manual: add a missing section ID I forgot to give an ID for this section. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-06 06:42:58 +08:00
[[Finding-comments-with-given-content]]
user-manual: finding commits referencing given file content Another amusing git exploration example brought up in irc. (Credit to aeruder for the complete solution.) Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-19 12:37:25 +08:00
Finding commits referencing a file with given content
-----------------------------------------------------
Somebody hands you a copy of a file, and asks which commits modified a
file such that it contained the given content either before or after the
commit. You can find out with this:
-------------------------------------------------
$ git log --raw -r --abbrev=40 --pretty=oneline -- filename |
grep -B 1 `git hash-object filename`
-------------------------------------------------
Figuring out why this works is left as an exercise to the (advanced)
student. The gitlink:git-log[1], gitlink:git-diff-tree[1], and
gitlink:git-hash-object[1] man pages may prove helpful.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[Developing-with-git]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Developing with git
===================
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[telling-git-your-name]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Telling git your name
---------------------
Before creating any commits, you should introduce yourself to git. The
user-manual: fix .gitconfig editing examples Santi Béjar points out that when telling people how to "introduce themselves" to git we're advising them to replace their entire .gitconfig file. Fix that. Cc: "Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:16:33 +08:00
easiest way to do so is to make sure the following lines appear in a
file named .gitconfig in your home directory:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
------------------------------------------------
[user]
name = Your Name Comes Here
email = you@yourdomain.example.com
------------------------------------------------
user-manual: add references to git-config man page Direct editing of config files may be more natural for users than using the git-config commandline; but we should still reference the git-config man page when we describe such editing, so people know where to go for details on the config file syntax and meanings of the variables. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 13:17:51 +08:00
(See the "CONFIGURATION FILE" section of gitlink:git-config[1] for
details on the configuration file.)
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[creating-a-new-repository]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Creating a new repository
-------------------------
Creating a new repository from scratch is very easy:
-------------------------------------------------
$ mkdir project
$ cd project
user-manual: replace init-db by init Replace mentions of init-db by mentions of init. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-12 01:44:08 +08:00
$ git init
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
If you have some initial content (say, a tarball):
-------------------------------------------------
$ tar -xzvf project.tar.gz
$ cd project
user-manual: replace init-db by init Replace mentions of init-db by mentions of init. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-12 01:44:08 +08:00
$ git init
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
$ git add . # include everything below ./ in the first commit:
$ git commit
-------------------------------------------------
[[how-to-make-a-commit]]
usermanual.txt: some capitalization nits Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-07 07:48:36 +08:00
How to make a commit
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
--------------------
Creating a new commit takes three steps:
1. Making some changes to the working directory using your
favorite editor.
2. Telling git about your changes.
3. Creating the commit using the content you told git about
in step 2.
In practice, you can interleave and repeat steps 1 and 2 as many
times as you want: in order to keep track of what you want committed
at step 3, git maintains a snapshot of the tree's contents in a
special staging area called "the index."
user manual: answer some comments from Junio Junio left a few comments in his previous patch; deal with each of them. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:23:37 +08:00
At the beginning, the content of the index will be identical to
that of the HEAD. The command "git diff --cached", which shows
the difference between the HEAD and the index, should therefore
produce no output at that point.
User manual: fix typos in examples Correct command line examples of repo-config, format-patch and am. A full object name is 40-hexdigit; it may be 20-byte but 20-digit is misleading. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-11 10:11:53 +08:00
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Modifying the index is easy:
To update the index with the new contents of a modified file, use
-------------------------------------------------
$ git add path/to/file
-------------------------------------------------
To add the contents of a new file to the index, use
-------------------------------------------------
$ git add path/to/file
-------------------------------------------------
User manual: fix typos in examples Correct command line examples of repo-config, format-patch and am. A full object name is 40-hexdigit; it may be 20-byte but 20-digit is misleading. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-11 10:11:53 +08:00
To remove a file from the index and from the working tree,
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git rm path/to/file
-------------------------------------------------
After each step you can verify that
-------------------------------------------------
$ git diff --cached
-------------------------------------------------
always shows the difference between the HEAD and the index file--this
is what you'd commit if you created the commit now--and that
-------------------------------------------------
$ git diff
-------------------------------------------------
shows the difference between the working tree and the index file.
Note that "git add" always adds just the current contents of a file
to the index; further changes to the same file will be ignored unless
you run git-add on the file again.
When you're ready, just run
-------------------------------------------------
$ git commit
-------------------------------------------------
and git will prompt you for a commit message and then create the new
Assorted typo fixes Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-04 12:49:16 +08:00
commit. Check to make sure it looks like what you expected with
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git show
-------------------------------------------------
As a special shortcut,
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git commit -a
-------------------------------------------------
will update the index with any files that you've modified or removed
and create a commit, all in one step.
A number of commands are useful for keeping track of what you're
about to commit:
-------------------------------------------------
$ git diff --cached # difference between HEAD and the index; what
user-manual: fix typolets. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-24 16:58:51 +08:00
# would be committed if you ran "commit" now.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
$ git diff # difference between the index file and your
# working directory; changes that would not
# be included if you ran "commit" now.
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
$ git diff HEAD # difference between HEAD and working tree; what
# would be committed if you ran "commit -a" now.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
$ git status # a brief per-file summary of the above.
-------------------------------------------------
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[creating-good-commit-messages]]
usermanual.txt: some capitalization nits Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-07 07:48:36 +08:00
Creating good commit messages
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-----------------------------
Though not required, it's a good idea to begin the commit message
with a single short (less than 50 character) line summarizing the
change, followed by a blank line and then a more thorough
description. Tools that turn commits into email, for example, use
the first line on the Subject line and the rest of the commit in the
body.
user-manual: Add section on ignoring files The todo list at the end of the user manual says that something must be said about .gitignore. Also, there seems to be a lack of documentation on how to choose between the various types of ignore files (.gitignore vs. .git/info/exclude, etc.). This patch adds a section on ignoring files which try to introduce how to tell git about ignored files, and how the different strategies complement eachother. The syntax of exclude patterns is explained in a simplified manner, with a reference to git-ls-files(1) which already contains a more thorough explanation. Signed-off-by: Johan Herland <johan@herland.net>
2007-05-16 08:31:40 +08:00
[[ignoring-files]]
Ignoring files
--------------
A project will often generate files that you do 'not' want to track with git.
This typically includes files generated by a build process or temporary
backup files made by your editor. Of course, 'not' tracking files with git
is just a matter of 'not' calling "`git add`" on them. But it quickly becomes
annoying to have these untracked files lying around; e.g. they make
"`git add .`" and "`git commit -a`" practically useless, and they keep
showing up in the output of "`git status`", etc.
Git therefore provides "exclude patterns" for telling git which files to
actively ignore. Exclude patterns are thoroughly explained in the
Create a new manpage for the gitignore format, and reference it elsewhere Only git-ls-files(1) describes the gitignore format in detail, and it does so with reference to git-ls-files options. Most users don't use the plumbing command git-ls-files directly, and shouldn't have to look in its manpage for information on the gitignore format. Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor out the gitignore documentation into that file, changing it to refer to .gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference gitignore(5) from other relevant manpages and documentation. Remove now-redundant information on exclude patterns from git-ls-files(1), leaving only information on how git-ls-files options specify exclude patterns and what precedence they have. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-06-03 01:08:54 +08:00
gitlink:gitignore[5] manual page, but the heart of the concept is simply
a list of files which git should ignore. Entries in the list may contain
globs to specify multiple files, or may be prefixed by "`!`" to
explicitly include (un-ignore) a previously excluded (ignored) file
(i.e. later exclude patterns override earlier ones). The following
example should illustrate such patterns:
user-manual: Add section on ignoring files The todo list at the end of the user manual says that something must be said about .gitignore. Also, there seems to be a lack of documentation on how to choose between the various types of ignore files (.gitignore vs. .git/info/exclude, etc.). This patch adds a section on ignoring files which try to introduce how to tell git about ignored files, and how the different strategies complement eachother. The syntax of exclude patterns is explained in a simplified manner, with a reference to git-ls-files(1) which already contains a more thorough explanation. Signed-off-by: Johan Herland <johan@herland.net>
2007-05-16 08:31:40 +08:00
-------------------------------------------------
# Lines starting with '#' are considered comments.
# Ignore foo.txt.
foo.txt
# Ignore (generated) html files,
*.html
# except foo.html which is maintained by hand.
!foo.html
# Ignore objects and archives.
*.[oa]
-------------------------------------------------
The next question is where to put these exclude patterns so that git can
find them. Git looks for exclude patterns in the following files:
`.gitignore` files in your working tree:::
You may store multiple `.gitignore` files at various locations in your
working tree. Each `.gitignore` file is applied to the directory where
it's located, including its subdirectories. Furthermore, the
`.gitignore` files can be tracked like any other files in your working
tree; just do a "`git add .gitignore`" and commit. `.gitignore` is
therefore the right place to put exclude patterns that are meant to
be shared between all project participants, such as build output files
(e.g. `\*.o`), etc.
`.git/info/exclude` in your repo:::
Exclude patterns in this file are applied to the working tree as a
whole. Since the file is not located in your working tree, it does
not follow push/pull/clone like `.gitignore` can do. This is therefore
the place to put exclude patterns that are local to your copy of the
repo (i.e. 'not' shared between project participants), such as
temporary backup files made by your editor (e.g. `\*~`), etc.
The file specified by the `core.excludesfile` config directive:::
By setting the `core.excludesfile` config directive you can tell git
where to find more exclude patterns (see gitlink:git-config[1] for
more information on configuration options). This config directive
can be set in the per-repo `.git/config` file, in which case the
exclude patterns will apply to that repo only. Alternatively, you
can set the directive in the global `~/.gitconfig` file to apply
the exclude pattern to all your git repos. As with the above
`.git/info/exclude` (and, indeed, with git config directives in
general), this directive does not follow push/pull/clone, but remain
local to your repo(s).
[NOTE]
In addition to the above alternatives, there are git commands that can take
exclude patterns directly on the command line. See gitlink:git-ls-files[1]
for an example of this.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[how-to-merge]]
usermanual.txt: some capitalization nits Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-07 07:48:36 +08:00
How to merge
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
------------
You can rejoin two diverging branches of development using
gitlink:git-merge[1]:
-------------------------------------------------
$ git merge branchname
-------------------------------------------------
merges the development in the branch "branchname" into the current
branch. If there are conflicts--for example, if the same file is
modified in two different ways in the remote branch and the local
branch--then you are warned; the output may look something like this:
-------------------------------------------------
user-manual: fix inconsistent use of pull and merge I used "git pull ." instead of "git merge" here without any explanation. Stick instead to "git merge" for now (the equivalent pull syntax is still covered in a later chapter). Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 10:52:39 +08:00
$ git merge next
100% (4/4) done
Auto-merged file.txt
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
CONFLICT (content): Merge conflict in file.txt
Automatic merge failed; fix conflicts and then commit the result.
-------------------------------------------------
Conflict markers are left in the problematic files, and after
you resolve the conflicts manually, you can update the index
with the contents and run git commit, as you normally would when
creating a new file.
If you examine the resulting commit using gitk, you will see that it
has two parents, one pointing to the top of the current branch, and
one to the top of the other branch.
[[resolving-a-merge]]
Resolving a merge
-----------------
When a merge isn't resolved automatically, git leaves the index and
the working tree in a special state that gives you all the
information you need to help resolve the merge.
Files with conflicts are marked specially in the index, so until you
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
resolve the problem and update the index, gitlink:git-commit[1] will
fail:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git commit
file.txt: needs merge
-------------------------------------------------
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
Also, gitlink:git-status[1] will list those files as "unmerged", and the
files with conflicts will have conflict markers added, like this:
-------------------------------------------------
<<<<<<< HEAD:file.txt
Hello world
=======
Goodbye
>>>>>>> 77976da35a11db4580b80ae27e8d65caf5208086:file.txt
-------------------------------------------------
All you need to do is edit the files to resolve the conflicts, and then
-------------------------------------------------
$ git add file.txt
$ git commit
-------------------------------------------------
Note that the commit message will already be filled in for you with
some information about the merge. Normally you can just use this
default message unchanged, but you may add additional commentary of
your own if desired.
The above is all you need to know to resolve a simple merge. But git
also provides more information to help resolve conflicts:
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[conflict-resolution]]
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
Getting conflict-resolution help during a merge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
All of the changes that git was able to merge automatically are
already added to the index file, so gitlink:git-diff[1] shows only
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
the conflicts. It uses an unusual syntax:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git diff
diff --cc file.txt
index 802992c,2b60207..0000000
--- a/file.txt
+++ b/file.txt
@@@ -1,1 -1,1 +1,5 @@@
++<<<<<<< HEAD:file.txt
+Hello world
++=======
+ Goodbye
++>>>>>>> 77976da35a11db4580b80ae27e8d65caf5208086:file.txt
-------------------------------------------------
user-manual: fix typolets. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-24 16:58:51 +08:00
Recall that the commit which will be committed after we resolve this
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
conflict will have two parents instead of the usual one: one parent
will be HEAD, the tip of the current branch; the other will be the
tip of the other branch, which is stored temporarily in MERGE_HEAD.
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
During the merge, the index holds three versions of each file. Each of
these three "file stages" represents a different version of the file:
-------------------------------------------------
$ git show :1:file.txt # the file in a common ancestor of both branches
$ git show :2:file.txt # the version from HEAD, but including any
# nonconflicting changes from MERGE_HEAD
$ git show :3:file.txt # the version from MERGE_HEAD, but including any
# nonconflicting changes from HEAD.
-------------------------------------------------
Since the stage 2 and stage 3 versions have already been updated with
nonconflicting changes, the only remaining differences between them are
the important ones; thus gitlink:git-diff[1] can use the information in
the index to show only those conflicts.
The diff above shows the differences between the working-tree version of
file.txt and the stage 2 and stage 3 versions. So instead of preceding
each line by a single "+" or "-", it now uses two columns: the first
column is used for differences between the first parent and the working
directory copy, and the second for differences between the second parent
and the working directory copy. (See the "COMBINED DIFF FORMAT" section
of gitlink:git-diff-files[1] for a details of the format.)
After resolving the conflict in the obvious way (but before updating the
index), the diff will look like:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git diff
diff --cc file.txt
index 802992c,2b60207..0000000
--- a/file.txt
+++ b/file.txt
@@@ -1,1 -1,1 +1,1 @@@
- Hello world
-Goodbye
++Goodbye world
-------------------------------------------------
This shows that our resolved version deleted "Hello world" from the
first parent, deleted "Goodbye" from the second parent, and added
"Goodbye world", which was previously absent from both.
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
Some special diff options allow diffing the working directory against
any of these stages:
-------------------------------------------------
$ git diff -1 file.txt # diff against stage 1
$ git diff --base file.txt # same as the above
$ git diff -2 file.txt # diff against stage 2
$ git diff --ours file.txt # same as the above
$ git diff -3 file.txt # diff against stage 3
$ git diff --theirs file.txt # same as the above.
-------------------------------------------------
The gitlink:git-log[1] and gitk[1] commands also provide special help
for merges:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git log --merge
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
$ gitk --merge
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
These will display all commits which exist only on HEAD or on
MERGE_HEAD, and which touch an unmerged file.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Fixed link in user-manual link to git-mergetool was broken. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-16 13:48:47 +08:00
You may also use gitlink:git-mergetool[1], which lets you merge the
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
unmerged files using external tools such as emacs or kdiff3.
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
Each time you resolve the conflicts in a file and update the index:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git add file.txt
-------------------------------------------------
user-manual: more detailed merge discussion Add more details on conflict, including brief discussion of file stages. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 04:34:27 +08:00
the different stages of that file will be "collapsed", after which
git-diff will (by default) no longer show diffs for that file.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
[[undoing-a-merge]]
usermanual.txt: some capitalization nits Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-07 07:48:36 +08:00
Undoing a merge
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
---------------
If you get stuck and decide to just give up and throw the whole mess
away, you can always return to the pre-merge state with
-------------------------------------------------
$ git reset --hard HEAD
-------------------------------------------------
user-manual: fix typolets. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-24 16:58:51 +08:00
Or, if you've already committed the merge that you want to throw away,
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
user-manual: reset to ORIG_HEAD not HEAD to undo merge As Linus pointed out recently on the mailing list, git reset --hard HEAD^ doesn't undo a merge in the case where the merge did a fast-forward. So the rcommendation here is a little dangerous. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-20 07:46:09 +08:00
$ git reset --hard ORIG_HEAD
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
However, this last command can be dangerous in some cases--never
throw away a commit you have already committed if that commit may
itself have been merged into another branch, as doing so may confuse
further merges.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[fast-forwards]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Fast-forward merges
-------------------
There is one special case not mentioned above, which is treated
differently. Normally, a merge results in a merge commit, with two
parents, one pointing at each of the two lines of development that
were merged.
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
However, if the current branch is a descendant of the other--so every
commit present in the one is already contained in the other--then git
just performs a "fast forward"; the head of the current branch is moved
forward to point at the head of the merged-in branch, without any new
commits being created.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[fixing-mistakes]]
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
Fixing mistakes
---------------
If you've messed up the working tree, but haven't yet committed your
mistake, you can return the entire working tree to the last committed
state with
-------------------------------------------------
$ git reset --hard HEAD
-------------------------------------------------
If you make a commit that you later wish you hadn't, there are two
fundamentally different ways to fix the problem:
1. You can create a new commit that undoes whatever was done
by the previous commit. This is the correct thing if your
mistake has already been made public.
2. You can go back and modify the old commit. You should
never do this if you have already made the history public;
git does not normally expect the "history" of a project to
change, and cannot correctly perform repeated merges from
a branch that has had its history changed.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[reverting-a-commit]]
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
Fixing a mistake with a new commit
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Creating a new commit that reverts an earlier change is very easy;
just pass the gitlink:git-revert[1] command a reference to the bad
commit; for example, to revert the most recent commit:
-------------------------------------------------
$ git revert HEAD
-------------------------------------------------
This will create a new commit which undoes the change in HEAD. You
will be given a chance to edit the commit message for the new commit.
You can also revert an earlier change, for example, the next-to-last:
-------------------------------------------------
$ git revert HEAD^
-------------------------------------------------
In this case git will attempt to undo the old change while leaving
intact any changes made since then. If more recent changes overlap
with the changes to be reverted, then you will be asked to fix
conflicts manually, just as in the case of <<resolving-a-merge,
resolving a merge>>.
user-manual: how to replace commits older than most recent "Modifying" an old commit by checking it out, --amend'ing it, then rebasing on top of it, is a slightly cumbersome technique, but I've found it useful frequently enough to make it seem worth documenting. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 03:30:32 +08:00
[[fixing-a-mistake-by-editing-history]]
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
Fixing a mistake by editing history
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the problematic commit is the most recent commit, and you have not
yet made that commit public, then you may just
<<undoing-a-merge,destroy it using git-reset>>.
Alternatively, you
can edit the working directory and update the index to fix your
mistake, just as if you were going to <<how-to-make-a-commit,create a
new commit>>, then run
-------------------------------------------------
$ git commit --amend
-------------------------------------------------
which will replace the old commit by a new commit incorporating your
changes, giving you a chance to edit the old commit message first.
Again, you should never do this to a commit that may already have
been merged into another branch; use gitlink:git-revert[1] instead in
that case.
It is also possible to edit commits further back in the history, but
this is an advanced topic to be left for
<<cleaning-up-history,another chapter>>.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[checkout-of-path]]
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
Checking out an old version of a file
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In the process of undoing a previous bad change, you may find it
useful to check out an older version of a particular file using
gitlink:git-checkout[1]. We've used git checkout before to switch
branches, but it has quite different behavior if it is given a path
name: the command
-------------------------------------------------
$ git checkout HEAD^ path/to/file
-------------------------------------------------
replaces path/to/file by the contents it had in the commit HEAD^, and
also updates the index to match. It does not change branches.
If you just want to look at an old version of the file, without
modifying the working directory, you can do that with
gitlink:git-show[1]:
-------------------------------------------------
user-manual: fix missing colon in git-show example There should be a colon in this git-show example. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:00:12 +08:00
$ git show HEAD^:path/to/file
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
-------------------------------------------------
which will display the given version of the file.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[ensuring-good-performance]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Ensuring good performance
-------------------------
On large repositories, git depends on compression to keep the history
information from taking up to much space on disk or in memory.
This compression is not performed automatically. Therefore you
user-manual: update git-gc discussion It appears git-gc will no longer prune automatically, so we don't need to tell people not to do other stuff while running it. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 12:03:36 +08:00
should occasionally run gitlink:git-gc[1]:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git gc
-------------------------------------------------
user-manual: update git-gc discussion It appears git-gc will no longer prune automatically, so we don't need to tell people not to do other stuff while running it. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-22 12:03:36 +08:00
to recompress the archive. This can be very time-consuming, so
you may prefer to run git-gc when you are not doing other work.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[ensuring-reliability]]
user-manual: stub discussion of fsck and reflog Have some sort of recovery/reliability section that deals with reflog and fsck. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-26 13:17:12 +08:00
Ensuring reliability
--------------------
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[checking-for-corruption]]
user-manual: stub discussion of fsck and reflog Have some sort of recovery/reliability section that deals with reflog and fsck. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-26 13:17:12 +08:00
Checking the repository for corruption
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
The gitlink:git-fsck[1] command runs a number of self-consistency checks
on the repository, and reports on any problems. This may take some
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
time. The most common warning by far is about "dangling" objects:
-------------------------------------------------
user-manual: fsck-objects -> fsck There seems to be an agreement to rename fsck-objects to fsck. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:31:47 +08:00
$ git fsck
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
dangling commit 7281251ddd2a61e38657c827739c57015671a6b3
dangling commit 2706a059f258c6b245f298dc4ff2ccd30ec21a63
dangling commit 13472b7c4b80851a1bc551779171dcb03655e9b5
dangling blob 218761f9d90712d37a9c5e36f406f92202db07eb
dangling commit bf093535a34a4d35731aa2bd90fe6b176302f14f
dangling commit 8e4bec7f2ddaa268bef999853c25755452100f8e
dangling tree d50bb86186bf27b681d25af89d3b5b68382e4085
dangling tree b24c2473f1fd3d91352a624795be026d64c8841f
...
-------------------------------------------------
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
Dangling objects are not a problem. At worst they may take up a little
user-manual: grammar and style fixes - "method of" is vulgar, "method for" is nicer - "recovery" becomes "recovering" from Steve Hoelzer's original version of this patch - "if you want" is nicer as "if you wish" - "you may" should be "you can"; "you may" is "you have permission to" rather than "you can"'s "it is possible to" Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-12 23:43:19 +08:00
extra disk space. They can sometimes provide a last-resort method for
recovering lost work--see <<dangling-objects>> for details. However, if
you wish, you can remove them with gitlink:git-prune[1] or the --prune
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
option to gitlink:git-gc[1]:
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
-------------------------------------------------
$ git gc --prune
-------------------------------------------------
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
This may be time-consuming. Unlike most other git operations (including
git-gc when run without any options), it is not safe to prune while
other git operations are in progress in the same repository.
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[recovering-lost-changes]]
user-manual: stub discussion of fsck and reflog Have some sort of recovery/reliability section that deals with reflog and fsck. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-26 13:17:12 +08:00
Recovering lost changes
~~~~~~~~~~~~~~~~~~~~~~~
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[reflogs]]
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
Reflogs
^^^^^^^
Say you modify a branch with gitlink:git-reset[1] --hard, and then
realize that the branch was the only reference you had to that point in
history.
Fortunately, git also keeps a log, called a "reflog", of all the
previous values of each branch. So in this case you can still find the
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
old history using, for example,
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
-------------------------------------------------
$ git log master@{1}
-------------------------------------------------
This lists the commits reachable from the previous version of the head.
This syntax can be used to with any git command that accepts a commit,
not just with git log. Some other examples:
-------------------------------------------------
$ git show master@{2} # See where the branch pointed 2,
$ git show master@{3} # 3, ... changes ago.
$ gitk master@{yesterday} # See where it pointed yesterday,
$ gitk master@{"1 week ago"} # ... or last week
user-manual: more discussion of detached heads, fix typos Nicolas Pitre pointed out a couple typos and some room for improvement in the discussion of detached heads. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Cc: Nicolas Pitre <nico@cam.org>
2007-04-18 12:20:46 +08:00
$ git log --walk-reflogs master # show reflog entries for master
-------------------------------------------------
A separate reflog is kept for the HEAD, so
-------------------------------------------------
$ git show HEAD@{"1 week ago"}
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
-------------------------------------------------
user-manual: more discussion of detached heads, fix typos Nicolas Pitre pointed out a couple typos and some room for improvement in the discussion of detached heads. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Cc: Nicolas Pitre <nico@cam.org>
2007-04-18 12:20:46 +08:00
will show what HEAD pointed to one week ago, not what the current branch
pointed to one week ago. This allows you to see the history of what
you've checked out.
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
The reflogs are kept by default for 30 days, after which they may be
Two small typofixes. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-29 15:16:46 +08:00
pruned. See gitlink:git-reflog[1] and gitlink:git-gc[1] to learn
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
how to control this pruning, and see the "SPECIFYING REVISIONS"
section of gitlink:git-rev-parse[1] for details.
Note that the reflog history is very different from normal git history.
While normal history is shared by every repository that works on the
same project, the reflog history is not shared: it tells you only about
how the branches in your local repository have changed over time.
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
[[dangling-object-recovery]]
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
Examining dangling objects
^^^^^^^^^^^^^^^^^^^^^^^^^^
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
In some situations the reflog may not be able to save you. For example,
suppose you delete a branch, then realize you need the history it
contained. The reflog is also deleted; however, if you have not yet
pruned the repository, then you may still be able to find the lost
commits in the dangling objects that git-fsck reports. See
<<dangling-objects>> for the details.
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
-------------------------------------------------
$ git fsck
dangling commit 7281251ddd2a61e38657c827739c57015671a6b3
dangling commit 2706a059f258c6b245f298dc4ff2ccd30ec21a63
dangling commit 13472b7c4b80851a1bc551779171dcb03655e9b5
...
-------------------------------------------------
Fix some documentation typos and grammar Also suggest user manual mention .gitignore. Signed-off-by: Michael Coleman <tutufan@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-02 14:25:30 +08:00
You can examine
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
one of those dangling commits with, for example,
------------------------------------------------
$ gitk 7281251ddd --not --all
------------------------------------------------
which does what it sounds like: it says that you want to see the commit
history that is described by the dangling commit(s), but not the
history that is described by all your existing branches and tags. Thus
you get exactly the history reachable from that commit that is lost.
(And notice that it might not be just one commit: we only report the
"tip of the line" as being dangling, but there might be a whole deep
Fix minor typos/grammar in user-manual.txt Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28 12:13:09 +08:00
and complex commit history that was dropped.)
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
If you decide you want the history back, you can always create a new
reference pointing to it, for example, a new branch:
------------------------------------------------
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
$ git branch recovered-branch 7281251ddd
user-manual: reflogs, other recovery Add a brief discussion of reflogs. Also recovery of dangling commits seems to fit in here, so move some of the discussion out of Linus's email to here. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:31:35 +08:00
------------------------------------------------
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
Other types of dangling objects (blobs and trees) are also possible, and
dangling objects can arise in other situations.
user-manual: stub discussion of fsck and reflog Have some sort of recovery/reliability section that deals with reflog and fsck. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-26 13:17:12 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[sharing-development]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Sharing development with others
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
===============================
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
[[getting-updates-with-git-pull]]
Getting updates with git pull
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
-----------------------------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
After you clone a repository and make a few changes of your own, you
may wish to check the original repository for updates and merge them
into your own work.
We have already seen <<Updating-a-repository-with-git-fetch,how to
keep remote tracking branches up to date>> with gitlink:git-fetch[1],
and how to merge two branches. So you can merge in changes from the
original repository's master branch with:
-------------------------------------------------
$ git fetch
$ git merge origin/master
-------------------------------------------------
However, the gitlink:git-pull[1] command provides a way to do this in
one step:
-------------------------------------------------
$ git pull origin master
-------------------------------------------------
In fact, "origin" is normally the default repository to pull from,
and the default branch is normally the HEAD of the remote repository,
so often you can accomplish the above with just
-------------------------------------------------
$ git pull
-------------------------------------------------
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
See the descriptions of the branch.<name>.remote and branch.<name>.merge
options in gitlink:git-config[1] to learn how to control these defaults
depending on the current branch. Also note that the --track option to
gitlink:git-branch[1] and gitlink:git-checkout[1] can be used to
automatically set the default remote branch to pull from at the time
that a branch is created:
-------------------------------------------------
Fix typo in remote branch example in git user manual In Documentation/user-manual.txt the example $ git checkout --track -b origin/maint maint under "Getting updates with git pull", should read $ git checkout --track -b maint origin/maint This was noticed by Ron, and reported through http://bugs.debian.org/427502 Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-05 16:47:51 +08:00
$ git checkout --track -b maint origin/maint
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
-------------------------------------------------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
In addition to saving you keystrokes, "git pull" also helps you by
producing a default commit message documenting the branch and
repository that you pulled from.
(But note that no such commit will be created in the case of a
<<fast-forwards,fast forward>>; instead, your branch will just be
Fix minor typos/grammar in user-manual.txt Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28 12:13:09 +08:00
updated to point to the latest commit from the upstream branch.)
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
The git-pull command can also be given "." as the "remote" repository,
in which case it just merges in a branch from the current repository; so
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
the commands
-------------------------------------------------
$ git pull . branch
$ git merge branch
-------------------------------------------------
are roughly equivalent. The former is actually very commonly used.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[submitting-patches]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Submitting patches to a project
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
-------------------------------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
If you just have a few changes, the simplest way to submit them may
just be to send them as patches in email:
Two small typofixes. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-29 15:16:46 +08:00
First, use gitlink:git-format-patch[1]; for example:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
User manual: fix typos in examples Correct command line examples of repo-config, format-patch and am. A full object name is 40-hexdigit; it may be 20-byte but 20-digit is misleading. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-11 10:11:53 +08:00
$ git format-patch origin
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
will produce a numbered series of files in the current directory, one
for each patch in the current branch but not in origin/HEAD.
You can then import these into your mail client and send them by
hand. However, if you have a lot to send at once, you may prefer to
use the gitlink:git-send-email[1] script to automate the process.
Consult the mailing list for your project first to determine how they
prefer such patches be handled.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[importing-patches]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Importing patches to a project
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
------------------------------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Git also provides a tool called gitlink:git-am[1] (am stands for
"apply mailbox"), for importing such an emailed series of patches.
Just save all of the patch-containing messages, in order, into a
single mailbox file, say "patches.mbox", then run
-------------------------------------------------
User manual: fix typos in examples Correct command line examples of repo-config, format-patch and am. A full object name is 40-hexdigit; it may be 20-byte but 20-digit is misleading. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-11 10:11:53 +08:00
$ git am -3 patches.mbox
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
Git will apply each patch in order; if any conflicts are found, it
will stop, and you can fix the conflicts as described in
user manual: answer some comments from Junio Junio left a few comments in his previous patch; deal with each of them. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-01-11 12:23:37 +08:00
"<<resolving-a-merge,Resolving a merge>>". (The "-3" option tells
git to perform a merge; if you would prefer it just to abort and
leave your tree and index untouched, you may omit that option.)
Once the index is updated with the results of the conflict
resolution, instead of creating a new commit, just run
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git am --resolved
-------------------------------------------------
and git will create the commit for you and continue applying the
remaining patches from the mailbox.
The final result will be a series of commits, one for each patch in
the original mailbox, with authorship and commit log message each
taken from the message containing each patch.
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
[[public-repositories]]
Public git repositories
-----------------------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
Another way to submit changes to a project is to tell the maintainer of
that project to pull the changes from your repository using git-pull[1].
In the section "<<getting-updates-with-git-pull, Getting updates with
git pull>>" we described this as a way to get updates from the "main"
repository, but it works just as well in the other direction.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
If you and the maintainer both have accounts on the same machine, then
you can just pull changes from each other's repositories directly;
user-manual: more explanation of push and pull usage Recently a user on the mailing list complained that they'd read the manual but couldn't figure out how to keep a couple private repositories in sync. They'd tried using push, and were surprised by the effect. Add a little text in an attempt to make it clear that: - Pushing to a branch that is checked out will have odd results. - It's OK to synchronize just using pull if that's simpler. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-19 04:38:22 +08:00
commands that accept repository URLs as arguments will also accept a
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
local directory name:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
$ git clone /path/to/repository
$ git pull /path/to/other/repository
-------------------------------------------------
user-manual: more explanation of push and pull usage Recently a user on the mailing list complained that they'd read the manual but couldn't figure out how to keep a couple private repositories in sync. They'd tried using push, and were surprised by the effect. Add a little text in an attempt to make it clear that: - Pushing to a branch that is checked out will have odd results. - It's OK to synchronize just using pull if that's simpler. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-19 04:38:22 +08:00
or an ssh url:
-------------------------------------------------
$ git clone ssh://yourhost/~you/repository
-------------------------------------------------
For projects with few developers, or for synchronizing a few private
repositories, this may be all you need.
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
However, the more common way to do this is to maintain a separate public
repository (usually on a different host) for others to pull changes
from. This is usually more convenient, and allows you to cleanly
separate private work in progress from publicly visible work.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
You will continue to do your day-to-day work in your personal
repository, but periodically "push" changes from your personal
repository into your public repository, allowing other developers to
pull from that repository. So the flow of changes, in a situation
where there is one other developer with a public repository, looks
like this:
you push
your personal repo ------------------> your public repo
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
^ |
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
| |
| you pull | they pull
| |
| |
| they push V
their public repo <------------------- their repo
user-manual: more explanation of push and pull usage Recently a user on the mailing list complained that they'd read the manual but couldn't figure out how to keep a couple private repositories in sync. They'd tried using push, and were surprised by the effect. Add a little text in an attempt to make it clear that: - Pushing to a branch that is checked out will have odd results. - It's OK to synchronize just using pull if that's simpler. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-19 04:38:22 +08:00
We explain how to do this in the following sections.
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
[[setting-up-a-public-repository]]
Setting up a public repository
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Assume your personal repository is in the directory ~/proj. We
first create a new clone of the repository and tell git-daemon that it
is meant to be public:
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
user-manual: fix clone and fetch typos More typo fixes from Santi Béjar, plus a couple other mistakes I noticed along the way. Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-08 11:34:26 +08:00
$ git clone --bare ~/proj proj.git
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
$ touch proj.git/git-daemon-export-ok
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
-------------------------------------------------
user-manual: fix clone and fetch typos More typo fixes from Santi Béjar, plus a couple other mistakes I noticed along the way. Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-08 11:34:26 +08:00
The resulting directory proj.git contains a "bare" git repository--it is
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
just the contents of the ".git" directory, without any files checked out
around it.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
Next, copy proj.git to the server where you plan to host the
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
public repository. You can use scp, rsync, or whatever is most
convenient.
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
[[exporting-via-git]]
Exporting a git repository via the git protocol
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is the preferred method.
If someone else administers the server, they should tell you what
directory to put the repository in, and what git:// url it will appear
at. You can then skip to the section
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
"<<pushing-changes-to-a-public-repository,Pushing changes to a public
repository>>", below.
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
Otherwise, all you need to do is start gitlink:git-daemon[1]; it will
listen on port 9418. By default, it will allow access to any directory
that looks like a git directory and contains the magic file
git-daemon-export-ok. Passing some directory paths as git-daemon
arguments will further restrict the exports to those paths.
You can also run git-daemon as an inetd service; see the
gitlink:git-daemon[1] man page for details. (See especially the
examples section.)
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
[[exporting-via-http]]
Exporting a git repository via http
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
The git protocol gives better performance and reliability, but on a
host with a web server set up, http exports may be simpler to set up.
All you need to do is place the newly created bare git repository in
a directory that is exported by the web server, and make some
adjustments to give web clients some extra information they need:
-------------------------------------------------
$ mv proj.git /home/you/public_html/proj.git
$ cd proj.git
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
$ git --bare update-server-info
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
$ chmod a+x hooks/post-update
-------------------------------------------------
(For an explanation of the last two lines, see
gitlink:git-update-server-info[1], and the documentation
Link to HTML version of external doc if available Currently $ git grep '\([^t]\|^\)'link: user-manual.txt gives four hits that refer to .txt version of the documentation set, but at least "hooks" and "cvs-migration" have HTML variants installed, so refer to them instead. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-13 02:47:38 +08:00
link:hooks.html[Hooks used by git].)
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Advertise the url of proj.git. Anybody else should then be able to
clone or pull from that url, for example with a commandline like:
-------------------------------------------------
$ git clone http://yourserver.com/~you/proj.git
-------------------------------------------------
(See also
link:howto/setup-git-server-over-http.txt[setup-git-server-over-http]
for a slightly more sophisticated setup using WebDAV which also
allows pushing over http.)
[[pushing-changes-to-a-public-repository]]
Pushing changes to a public repository
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
Note that the two techniques outlined above (exporting via
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
<<exporting-via-http,http>> or <<exporting-via-git,git>>) allow other
maintainers to fetch your latest changes, but they do not allow write
access, which you will need to update the public repository with the
latest changes created in your private repository.
The simplest way to do this is using gitlink:git-push[1] and ssh; to
update the remote branch named "master" with the latest state of your
branch named "master", run
-------------------------------------------------
$ git push ssh://yourserver.com/~you/proj.git master:master
-------------------------------------------------
or just
-------------------------------------------------
$ git push ssh://yourserver.com/~you/proj.git master
-------------------------------------------------
As with git-fetch, git-push will complain if this does not result in
a <<fast-forwards,fast forward>>. Normally this is a sign of
something wrong. However, if you are sure you know what you're
doing, you may force git-push to perform the update anyway by
proceeding the branch name by a plus sign:
-------------------------------------------------
$ git push ssh://yourserver.com/~you/proj.git +master
-------------------------------------------------
user-manual: more explanation of push and pull usage Recently a user on the mailing list complained that they'd read the manual but couldn't figure out how to keep a couple private repositories in sync. They'd tried using push, and were surprised by the effect. Add a little text in an attempt to make it clear that: - Pushing to a branch that is checked out will have odd results. - It's OK to synchronize just using pull if that's simpler. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-19 04:38:22 +08:00
Note that the target of a "push" is normally a
<<def_bare_repository,bare>> repository. You can also push to a
repository that has a checked-out working tree, but the working tree
will not be updated by the push. This may lead to unexpected results if
the branch you push to is the currently checked-out branch!
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
As with git-fetch, you may also set up configuration options to
save typing; so, for example, after
-------------------------------------------------
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
$ cat >>.git/config <<EOF
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
[remote "public-repo"]
url = ssh://yourserver.com/~you/proj.git
EOF
-------------------------------------------------
you should be able to perform the above push with just
-------------------------------------------------
$ git push public-repo master
-------------------------------------------------
See the explanations of the remote.<name>.url, branch.<name>.remote,
user-manual: repo-config -> config Looks like we're going to allow git-config as the preferred alias to git-repo-config, so let's document that instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:50:22 +08:00
and remote.<name>.push options in gitlink:git-config[1] for
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
details.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[setting-up-a-shared-repository]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Setting up a shared repository
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Another way to collaborate is by using a model similar to that
commonly used in CVS, where several developers with special rights
all push to and pull from a single shared repository. See
Link to HTML version of external doc if available Currently $ git grep '\([^t]\|^\)'link: user-manual.txt gives four hits that refer to .txt version of the documentation set, but at least "hooks" and "cvs-migration" have HTML variants installed, so refer to them instead. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-13 02:47:38 +08:00
link:cvs-migration.html[git for CVS users] for instructions on how to
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
set this up.
user-manual: discourage shared repository I don't really want to look like we're encouraging the shared repository thing. Take down some of the argument for using purely single-developer-owned repositories and collaborating using patches and pulls instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:30:58 +08:00
However, while there is nothing wrong with git's support for shared
repositories, this mode of operation is not generally recommended,
simply because the mode of collaboration that git supports--by
exchanging patches and pulling from public repositories--has so many
advantages over the central shared repository:
- Git's ability to quickly import and merge patches allows a
single maintainer to process incoming changes even at very
high rates. And when that becomes too much, git-pull provides
an easy way for that maintainer to delegate this job to other
maintainers while still allowing optional review of incoming
changes.
- Since every developer's repository has the same complete copy
of the project history, no repository is special, and it is
trivial for another developer to take over maintenance of a
project, either by mutual agreement, or because a maintainer
becomes unresponsive or difficult to work with.
- The lack of a central group of "committers" means there is
less need for formal decisions about who is "in" and who is
"out".
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[setting-up-gitweb]]
user-manual: reorganize public git repo discussion Helping a couple people set up public repos recently, I wanted to point them at this piece of the user manual, but found it wasn't as helpful as it could be: - It starts with a big explanation of why you'd want a public repository, not necessary in their case since they already knew why they wanted that. So, separate that out. - It skimps on some of the git-daemon details, and puts the http export information first. Fix that. Also group all the public repo subsections into a single section, and do some miscellaneous related editing. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-15 12:00:29 +08:00
Allowing web browsing of a repository
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: point to README for gitweb information I'd like complete gitweb setup instructions some day, but for now just refer to the gitweb README. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-31 01:43:36 +08:00
The gitweb cgi script provides users an easy way to browse your
project's files and history without having to install git; see the file
Documentation: A few minor fixes to Git User's Manual Mainly consistent usage of "git command" and not "git-command" syntax Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-04 00:27:28 +08:00
gitweb/INSTALL in the git source tree for instructions on setting it up.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[sharing-development-examples]]
Documentation: reorder development section, todo's Update todo's. Split out "sharing development" section into a separate chapter, reorder. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 12:42:36 +08:00
Examples
--------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: move howto/using-topic-branches into manual Move howto/using-topic-branches into the user manual as an example for the "sharing development" chapter. While we're at it, remove some discussion that's covered in earlier chapters, modernize somewhat (use separate-heads setup, remotes, replace "whatchanged" by "log", etc.), and replace syntax we'd need to explain by syntax we've already covered (e.g. old..new instead of new ^old). The result may not really describe what Tony Luck does any more.... Hope that's not annoying. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 13:48:47 +08:00
[[maintaining-topic-branches]]
Maintaining topic branches for a Linux subsystem maintainer
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This describes how Tony Luck uses git in his role as maintainer of the
IA64 architecture for the Linux kernel.
He uses two public branches:
- A "test" tree into which patches are initially placed so that they
can get some exposure when integrated with other ongoing development.
This tree is available to Andrew for pulling into -mm whenever he
wants.
- A "release" tree into which tested patches are moved for final sanity
checking, and as a vehicle to send them upstream to Linus (by sending
him a "please pull" request.)
He also uses a set of temporary branches ("topic branches"), each
containing a logical grouping of patches.
To set this up, first create your work tree by cloning Linus's public
tree:
-------------------------------------------------
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git work
$ cd work
-------------------------------------------------
Linus's tree will be stored in the remote branch named origin/master,
and can be updated using gitlink:git-fetch[1]; you can track other
public trees using gitlink:git-remote[1] to set up a "remote" and
git-fetch[1] to keep them up-to-date; see <<repositories-and-branches>>.
Now create the branches in which you are going to work; these start out
at the current tip of origin/master branch, and should be set up (using
the --track option to gitlink:git-branch[1]) to merge changes in from
Linus by default.
-------------------------------------------------
$ git branch --track test origin/master
$ git branch --track release origin/master
-------------------------------------------------
These can be easily kept up to date using gitlink:git-pull[1]
-------------------------------------------------
$ git checkout test && git pull
$ git checkout release && git pull
-------------------------------------------------
Important note! If you have any local changes in these branches, then
this merge will create a commit object in the history (with no local
changes git will simply do a "Fast forward" merge). Many people dislike
the "noise" that this creates in the Linux history, so you should avoid
doing this capriciously in the "release" branch, as these noisy commits
will become part of the permanent history when you ask Linus to pull
from the release branch.
A few configuration variables (see gitlink:git-config[1]) can
make it easy to push both branches to your public tree. (See
<<setting-up-a-public-repository>>.)
-------------------------------------------------
$ cat >> .git/config <<EOF
[remote "mytree"]
url = master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
push = release
push = test
EOF
-------------------------------------------------
Then you can push both the test and release trees using
gitlink:git-push[1]:
-------------------------------------------------
$ git push mytree
-------------------------------------------------
or push just one of the test and release branches using:
-------------------------------------------------
$ git push mytree test
-------------------------------------------------
or
-------------------------------------------------
$ git push mytree release
-------------------------------------------------
Now to apply some patches from the community. Think of a short
snappy name for a branch to hold this patch (or related group of
patches), and create a new branch from the current tip of Linus's
branch:
-------------------------------------------------
$ git checkout -b speed-up-spinlocks origin
-------------------------------------------------
Now you apply the patch(es), run some tests, and commit the change(s). If
the patch is a multi-part series, then you should apply each as a separate
commit to this branch.
-------------------------------------------------
$ ... patch ... test ... commit [ ... patch ... test ... commit ]*
-------------------------------------------------
When you are happy with the state of this change, you can pull it into the
"test" branch in preparation to make it public:
-------------------------------------------------
$ git checkout test && git pull . speed-up-spinlocks
-------------------------------------------------
It is unlikely that you would have any conflicts here ... but you might if you
spent a while on this step and had also pulled new versions from upstream.
Some time later when enough time has passed and testing done, you can pull the
same branch into the "release" tree ready to go upstream. This is where you
see the value of keeping each patch (or patch series) in its own branch. It
means that the patches can be moved into the "release" tree in any order.
-------------------------------------------------
$ git checkout release && git pull . speed-up-spinlocks
-------------------------------------------------
After a while, you will have a number of branches, and despite the
well chosen names you picked for each of them, you may forget what
they are for, or what status they are in. To get a reminder of what
changes are in a specific branch, use:
-------------------------------------------------
$ git log linux..branchname | git-shortlog
-------------------------------------------------
To see whether it has already been merged into the test or release branches
use:
-------------------------------------------------
$ git log test..branchname
-------------------------------------------------
or
-------------------------------------------------
$ git log release..branchname
-------------------------------------------------
(If this branch has not yet been merged you will see some log entries.
If it has been merged, then there will be no output.)
Once a patch completes the great cycle (moving from test to release,
then pulled by Linus, and finally coming back into your local
"origin/master" branch) the branch for this change is no longer needed.
You detect this when the output from:
-------------------------------------------------
$ git log origin..branchname
-------------------------------------------------
is empty. At this point the branch can be deleted:
-------------------------------------------------
$ git branch -d branchname
-------------------------------------------------
Some changes are so trivial that it is not necessary to create a separate
branch and then merge into each of the test and release branches. For
these changes, just apply directly to the "release" branch, and then
merge that into the "test" branch.
To create diffstat and shortlog summaries of changes to include in a "please
pull" request to Linus you can use:
-------------------------------------------------
$ git diff --stat origin..release
-------------------------------------------------
and
-------------------------------------------------
$ git log -p origin..release | git shortlog
-------------------------------------------------
Here are some of the scripts that simplify all this even further.
-------------------------------------------------
==== update script ====
# Update a branch in my GIT tree. If the branch to be updated
# is origin, then pull from kernel.org. Otherwise merge
# origin/master branch into test|release branch
case "$1" in
test|release)
git checkout $1 && git pull . origin
;;
origin)
before=$(cat .git/refs/remotes/origin/master)
git fetch origin
after=$(cat .git/refs/remotes/origin/master)
if [ $before != $after ]
then
git log $before..$after | git shortlog
fi
;;
*)
echo "Usage: $0 origin|test|release" 1>&2
exit 1
;;
esac
-------------------------------------------------
-------------------------------------------------
==== merge script ====
# Merge a branch into either the test or release branch
pname=$0
usage()
{
echo "Usage: $pname branch test|release" 1>&2
exit 1
}
if [ ! -f .git/refs/heads/"$1" ]
then
echo "Can't see branch <$1>" 1>&2
usage
fi
case "$2" in
test|release)
if [ $(git log $2..$1 | wc -c) -eq 0 ]
then
echo $1 already merged into $2 1>&2
exit 1
fi
git checkout $2 && git pull . $1
;;
*)
usage
;;
esac
-------------------------------------------------
-------------------------------------------------
==== status script ====
# report on status of my ia64 GIT tree
gb=$(tput setab 2)
rb=$(tput setab 1)
restore=$(tput setab 9)
if [ `git rev-list test..release | wc -c` -gt 0 ]
then
echo $rb Warning: commits in release that are not in test $restore
git log test..release
fi
for branch in `ls .git/refs/heads`
do
if [ $branch = test -o $branch = release ]
then
continue
fi
echo -n $gb ======= $branch ====== $restore " "
status=
for ref in test release origin/master
do
if [ `git rev-list $ref..$branch | wc -c` -gt 0 ]
then
status=$status${ref:0:1}
fi
done
case $status in
trl)
echo $rb Need to pull into test $restore
;;
rl)
echo "In test"
;;
l)
echo "Waiting for linus"
;;
"")
echo $rb All done $restore
;;
*)
echo $rb "<$status>" $restore
;;
esac
git log origin/master..$branch | git shortlog
done
-------------------------------------------------
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
[[cleaning-up-history]]
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
Rewriting history and maintaining patch series
==============================================
Normally commits are only added to a project, never taken away or
replaced. Git is designed with this assumption, and violating it will
cause git's merge machinery (for example) to do the wrong thing.
However, there is a situation in which it can be useful to violate this
assumption.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[patch-series]]
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
Creating the perfect patch series
---------------------------------
Suppose you are a contributor to a large project, and you want to add a
complicated feature, and to present it to the other developers in a way
that makes it easy for them to read your changes, verify that they are
correct, and understand why you made each change.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
If you present all of your changes as a single patch (or commit), they
Fix minor typos/grammar in user-manual.txt Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28 12:13:09 +08:00
may find that it is too much to digest all at once.
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
If you present them with the entire history of your work, complete with
mistakes, corrections, and dead ends, they may be overwhelmed.
So the ideal is usually to produce a series of patches such that:
1. Each patch can be applied in order.
2. Each patch includes a single logical change, together with a
message explaining the change.
3. No patch introduces a regression: after applying any initial
part of the series, the resulting project still compiles and
works, and has no bugs that it didn't have before.
4. The complete series produces the same end result as your own
(probably much messier!) development process did.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
We will introduce some tools that can help you do this, explain how to
use them, and then explain some of the problems that can arise because
you are rewriting history.
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[using-git-rebase]]
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
Keeping a patch series up to date using git-rebase
--------------------------------------------------
Fix minor typos/grammar in user-manual.txt Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28 12:13:09 +08:00
Suppose that you create a branch "mywork" on a remote-tracking branch
"origin", and create some commits on top of it:
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
-------------------------------------------------
$ git checkout -b mywork origin
$ vi file.txt
$ git commit
$ vi otherfile.txt
$ git commit
...
-------------------------------------------------
You have performed no merges into mywork, so it is just a simple linear
sequence of patches on top of "origin":
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
o--o--o <-- origin
\
o--o--o <-- mywork
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
Some more interesting work has been done in the upstream project, and
"origin" has advanced:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
o--o--O--o--o--o <-- origin
\
a--b--c <-- mywork
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
At this point, you could use "pull" to merge your changes back in;
the result would create a new merge commit, like this:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
o--o--O--o--o--o <-- origin
\ \
a--b--c--m <-- mywork
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
However, if you prefer to keep the history in mywork a simple series of
commits without any merges, you may instead choose to use
gitlink:git-rebase[1]:
-------------------------------------------------
$ git checkout mywork
$ git rebase origin
-------------------------------------------------
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
This will remove each of your commits from mywork, temporarily saving
them as patches (in a directory named ".dotest"), update mywork to
point at the latest version of origin, then apply each of the saved
patches to the new mywork. The result will look like:
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
o--o--O--o--o--o <-- origin
\
a'--b'--c' <-- mywork
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
In the process, it may discover conflicts. In that case it will stop
and allow you to fix the conflicts; after fixing conflicts, use "git
add" to update the index with those contents, and then, instead of
running git-commit, just run
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
-------------------------------------------------
$ git rebase --continue
-------------------------------------------------
and git will continue applying the rest of the patches.
At any point you may use the --abort option to abort this process and
return mywork to the state it had before you started the rebase:
-------------------------------------------------
$ git rebase --abort
-------------------------------------------------
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[modifying-one-commit]]
user-manual: how to replace commits older than most recent "Modifying" an old commit by checking it out, --amend'ing it, then rebasing on top of it, is a slightly cumbersome technique, but I've found it useful frequently enough to make it seem worth documenting. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 03:30:32 +08:00
Modifying a single commit
-------------------------
We saw in <<fixing-a-mistake-by-editing-history>> that you can replace the
most recent commit using
-------------------------------------------------
$ git commit --amend
-------------------------------------------------
which will replace the old commit by a new commit incorporating your
changes, giving you a chance to edit the old commit message first.
You can also use a combination of this and gitlink:git-rebase[1] to edit
commits further back in your history. First, tag the problematic commit with
-------------------------------------------------
$ git tag bad mywork~5
-------------------------------------------------
(Either gitk or git-log may be useful for finding the commit.)
user-manual: use detached head when rewriting history This is slightly simpler if we use a detached head. And it's probably good to have another example that uses this feature. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:16 +08:00
Then check out that commit, edit it, and rebase the rest of the series
on top of it (note that we could check out the commit on a temporary
branch, but instead we're using a <<detached-head,detached head>>):
user-manual: how to replace commits older than most recent "Modifying" an old commit by checking it out, --amend'ing it, then rebasing on top of it, is a slightly cumbersome technique, but I've found it useful frequently enough to make it seem worth documenting. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 03:30:32 +08:00
-------------------------------------------------
user-manual: use detached head when rewriting history This is slightly simpler if we use a detached head. And it's probably good to have another example that uses this feature. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:16 +08:00
$ git checkout bad
user-manual: how to replace commits older than most recent "Modifying" an old commit by checking it out, --amend'ing it, then rebasing on top of it, is a slightly cumbersome technique, but I've found it useful frequently enough to make it seem worth documenting. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 03:30:32 +08:00
$ # make changes here and update the index
$ git commit --amend
user-manual: use detached head when rewriting history This is slightly simpler if we use a detached head. And it's probably good to have another example that uses this feature. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:16 +08:00
$ git rebase --onto HEAD bad mywork
user-manual: how to replace commits older than most recent "Modifying" an old commit by checking it out, --amend'ing it, then rebasing on top of it, is a slightly cumbersome technique, but I've found it useful frequently enough to make it seem worth documenting. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 03:30:32 +08:00
-------------------------------------------------
user-manual: use detached head when rewriting history This is slightly simpler if we use a detached head. And it's probably good to have another example that uses this feature. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:16 +08:00
When you're done, you'll be left with mywork checked out, with the top
patches on mywork reapplied on top of your modified commit. You can
user-manual: how to replace commits older than most recent "Modifying" an old commit by checking it out, --amend'ing it, then rebasing on top of it, is a slightly cumbersome technique, but I've found it useful frequently enough to make it seem worth documenting. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 03:30:32 +08:00
then clean up with
-------------------------------------------------
$ git tag -d bad
-------------------------------------------------
Note that the immutable nature of git history means that you haven't really
"modified" existing commits; instead, you have replaced the old commits with
new commits having new object names.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[reordering-patch-series]]
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
Reordering or selecting from a patch series
-------------------------------------------
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Given one existing commit, the gitlink:git-cherry-pick[1] command
allows you to apply the change introduced by that commit and create a
new commit that records it. So, for example, if "mywork" points to a
series of patches on top of "origin", you might do something like:
-------------------------------------------------
$ git checkout -b mywork-new origin
$ gitk origin..mywork &
-------------------------------------------------
And browse through the list of patches in the mywork branch using gitk,
applying them (possibly in a different order) to mywork-new using
cherry-pick, and possibly modifying them as you go using commit
--amend.
Another technique is to use git-format-patch to create a series of
patches, then reset the state to before the patches:
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
-------------------------------------------------
$ git format-patch origin
$ git reset --hard origin
-------------------------------------------------
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Then modify, reorder, or eliminate patches as preferred before applying
them again with gitlink:git-am[1].
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[patch-series-tools]]
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
Other tools
-----------
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
There are numerous other tools, such as stgit, which exist for the
Fix minor typos/grammar in user-manual.txt Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28 12:13:09 +08:00
purpose of maintaining a patch series. These are outside of the scope of
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
this manual.
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[problems-with-rewriting-history]]
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
Problems with rewriting history
-------------------------------
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
The primary problem with rewriting the history of a branch has to do
with merging. Suppose somebody fetches your branch and merges it into
their branch, with a result something like this:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
o--o--O--o--o--o <-- origin
\ \
t--t--t--m <-- their branch:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Then suppose you modify the last three commits:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
o--o--o <-- new head of origin
/
o--o--O--o--o--o <-- old head of origin
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
If we examined all this history together in one repository, it will
look like:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
o--o--o <-- new head of origin
/
o--o--O--o--o--o <-- old head of origin
\ \
t--t--t--m <-- their branch:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Git has no way of knowing that the new head is an updated version of
the old head; it treats this situation exactly the same as it would if
two developers had independently done the work on the old and new heads
in parallel. At this point, if someone attempts to merge the new head
in to their branch, git will attempt to merge together the two (old and
new) lines of development, instead of trying to replace the old by the
new. The results are likely to be unexpected.
You may still choose to publish branches whose history is rewritten,
and it may be useful for others to be able to fetch those branches in
order to examine or test them, but they should not attempt to pull such
branches into their own work.
For true distributed development that supports proper merging,
published branches should never be rewritten.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[advanced-branch-management]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Advanced branch management
==========================
Documentation: git-rebase discussion, miscellaneous user-manual updates Add discussion of git-rebase, patch series, history rewriting. Mention "pull ." as a synonym for "merge". Remind myself of another case I want to cover in the other-vcs's chapter. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 12:57:41 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[fetching-individual-branches]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Fetching individual branches
----------------------------
Instead of using gitlink:git-remote[1], you can also choose just
to update one branch at a time, and to store it locally under an
arbitrary name:
-------------------------------------------------
$ git fetch origin todo:my-todo-work
-------------------------------------------------
The first argument, "origin", just tells git to fetch from the
repository you originally cloned from. The second argument tells git
to fetch the branch named "todo" from the remote repository, and to
store it locally under the name refs/heads/my-todo-work.
You can also fetch branches from other repositories; so
-------------------------------------------------
$ git fetch git://example.com/proj.git master:example-master
-------------------------------------------------
will create a new branch named "example-master" and store in it the
branch named "master" from the repository at the given URL. If you
already have a branch named example-master, it will attempt to
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
<<fast-forwards,fast-forward>> to the commit given by example.com's
master branch. In more detail:
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
[[fetch-fast-forwards]]
git fetch and fast-forwards
---------------------------
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
In the previous example, when updating an existing branch, "git
fetch" checks to make sure that the most recent commit on the remote
branch is a descendant of the most recent commit on your copy of the
branch before updating your copy of the branch to point at the new
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
commit. Git calls this process a <<fast-forwards,fast forward>>.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
A fast forward looks something like this:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
o--o--o--o <-- old head of the branch
\
o--o--o <-- new head of the branch
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
In some cases it is possible that the new head will *not* actually be
a descendant of the old head. For example, the developer may have
realized she made a serious mistake, and decided to backtrack,
resulting in a situation like:
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
o--o--o--o--a--b <-- old head of the branch
\
o--o--o <-- new head of the branch
user-manual: fix rendering of history diagrams Asciidoc appears to interpret a backslash at the end of a line as escaping the end-of-line character, which screws up the display of history diagrams like o--o--o \ o--... The obvious fix (replacing "\" by "\\") doesn't work. The only workaround I've found is to include all such diagrams in a LiteralBlock. Asciidoc claims that should be equivalent to a literal paragraph, so I don't understand why the difference--perhaps it's an asciidoc bug. Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-03-11 11:38:13 +08:00
................................................
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
In this case, "git fetch" will fail, and print out a warning.
In that case, you can still force git to update to the new head, as
described in the following section. However, note that in the
situation above this may mean losing the commits labeled "a" and "b",
unless you've already created a reference of your own pointing to
them.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[forcing-fetch]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Forcing git fetch to do non-fast-forward updates
------------------------------------------------
If git fetch fails because the new head of a branch is not a
descendant of the old head, you may force the update with:
-------------------------------------------------
$ git fetch git://example.com/proj.git +master:refs/remotes/example/master
-------------------------------------------------
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
Note the addition of the "+" sign. Alternatively, you can use the "-f"
flag to force updates of all the fetched branches, as in:
-------------------------------------------------
$ git fetch -f origin
-------------------------------------------------
Be aware that commits that the old version of example/master pointed at
may be lost, as we saw in the previous section.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[remote-branch-configuration]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Configuring remote branches
---------------------------
We saw above that "origin" is just a shortcut to refer to the
Fix minor typos/grammar in user-manual.txt Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28 12:13:09 +08:00
repository that you originally cloned from. This information is
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
stored in git configuration variables, which you can see using
user-manual: repo-config -> config Looks like we're going to allow git-config as the preferred alias to git-repo-config, so let's document that instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:50:22 +08:00
gitlink:git-config[1]:
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
-------------------------------------------------
user-manual: repo-config -> config Looks like we're going to allow git-config as the preferred alias to git-repo-config, so let's document that instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:50:22 +08:00
$ git config -l
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
core.repositoryformatversion=0
core.filemode=true
core.logallrefupdates=true
remote.origin.url=git://git.kernel.org/pub/scm/git/git.git
remote.origin.fetch=+refs/heads/*:refs/remotes/origin/*
branch.master.remote=origin
branch.master.merge=refs/heads/master
-------------------------------------------------
If there are other repositories that you also use frequently, you can
create similar configuration options to save typing; for example,
after
-------------------------------------------------
user-manual: repo-config -> config Looks like we're going to allow git-config as the preferred alias to git-repo-config, so let's document that instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:50:22 +08:00
$ git config remote.example.url git://example.com/proj.git
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
-------------------------------------------------
then the following two commands will do the same thing:
-------------------------------------------------
$ git fetch git://example.com/proj.git master:refs/remotes/example/master
$ git fetch example master:refs/remotes/example/master
-------------------------------------------------
Even better, if you add one more option:
-------------------------------------------------
user-manual: repo-config -> config Looks like we're going to allow git-config as the preferred alias to git-repo-config, so let's document that instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:50:22 +08:00
$ git config remote.example.fetch master:refs/remotes/example/master
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
-------------------------------------------------
then the following commands will all do the same thing:
-------------------------------------------------
user-manual: fix clone and fetch typos More typo fixes from Santi Béjar, plus a couple other mistakes I noticed along the way. Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-08 11:34:26 +08:00
$ git fetch git://example.com/proj.git master:refs/remotes/example/master
$ git fetch example master:refs/remotes/example/master
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
$ git fetch example
-------------------------------------------------
You can also add a "+" to force the update each time:
-------------------------------------------------
user-manual: repo-config -> config Looks like we're going to allow git-config as the preferred alias to git-repo-config, so let's document that instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:50:22 +08:00
$ git config remote.example.fetch +master:ref/remotes/example/master
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
-------------------------------------------------
Don't do this unless you're sure you won't mind "git fetch" possibly
throwing away commits on mybranch.
Also note that all of the above configuration can be performed by
directly editing the file .git/config instead of using
user-manual: repo-config -> config Looks like we're going to allow git-config as the preferred alias to git-repo-config, so let's document that instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:50:22 +08:00
gitlink:git-config[1].
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: repo-config -> config Looks like we're going to allow git-config as the preferred alias to git-repo-config, so let's document that instead. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:50:22 +08:00
See gitlink:git-config[1] for more details on the configuration
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
options mentioned above.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: insert earlier of mention content-addressable architecture The content-addressable design is too important not to be worth at least a brief mention a little earlier on. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04 03:04:42 +08:00
[[git-internals]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Git internals
=============
user-manual: start revising "internals" chapter Minor revisions, cross-references. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:15 +08:00
Git depends on two fundamental abstractions: the "object database", and
the "current directory cache" aka "index".
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[the-object-database]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
The Object Database
-------------------
The object database is literally just a content-addressable collection
of objects. All objects are named by their content, which is
approximated by the SHA1 hash of the object itself. Objects may refer
to other objects (by referencing their SHA1 hash), and so you can
build up a hierarchy of objects.
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
All objects have a statically determined "type" which is
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
determined at object creation time, and which identifies the format of
the object (i.e. how it is used, and how it can refer to other
objects). There are currently four different object types: "blob",
user-manual: start revising "internals" chapter Minor revisions, cross-references. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:15 +08:00
"tree", "commit", and "tag".
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: start revising "internals" chapter Minor revisions, cross-references. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:15 +08:00
A <<def_blob_object,"blob" object>> cannot refer to any other object,
and is, as the name implies, a pure storage object containing some
user data. It is used to actually store the file data, i.e. a blob
object is associated with some particular version of some file.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: start revising "internals" chapter Minor revisions, cross-references. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:15 +08:00
A <<def_tree_object,"tree" object>> is an object that ties one or more
"blob" objects into a directory structure. In addition, a tree object
can refer to other tree objects, thus creating a directory hierarchy.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: start revising "internals" chapter Minor revisions, cross-references. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:15 +08:00
A <<def_commit_object,"commit" object>> ties such directory hierarchies
together into a <<def_DAG,directed acyclic graph>> of revisions - each
"commit" is associated with exactly one tree (the directory hierarchy at
the time of the commit). In addition, a "commit" refers to one or more
"parent" commit objects that describe the history of how we arrived at
that directory hierarchy.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
As a special case, a commit object with no parents is called the "root"
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
commit, and is the point of an initial project commit. Each project
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
must have at least one root, and while you can tie several different
root objects together into one project by creating a commit object which
has two or more separate roots as its ultimate parents, that's probably
just going to confuse people. So aim for the notion of "one root object
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
per project", even if git itself does not enforce that.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: start revising "internals" chapter Minor revisions, cross-references. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-16 12:37:15 +08:00
A <<def_tag_object,"tag" object>> symbolically identifies and can be
used to sign other objects. It contains the identifier and type of
another object, a symbolic name (of course!) and, optionally, a
signature.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Regardless of object type, all objects share the following
characteristics: they are all deflated with zlib, and have a header
that not only specifies their type, but also provides size information
about the data in the object. It's worth noting that the SHA1 hash
that is used to name the object is the hash of the original data
plus this header, so `sha1sum` 'file' does not match the object name
for 'file'.
(Historical note: in the dawn of the age of git the hash
was the sha1 of the 'compressed' object.)
As a result, the general consistency of an object can always be tested
independently of the contents or the type of the object: all objects can
be validated by verifying that (a) their hashes match the content of the
file and (b) the object successfully inflates to a stream of bytes that
Documentation: adjust to AsciiDoc 8 It turns out that the attribute definition we have had for a long time to hide "^" character from AsciiDoc 7 was not honored by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is a similar breakage with the "compatible" mode with + characters. The double colon at the end of definition list term needs to be attached to the term, without a whitespace. After this minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with compatibility mode seems to produce reasonably good results. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-15 13:20:16 +08:00
forms a sequence of <ascii type without space> {plus} <space> {plus} <ascii decimal
size> {plus} <byte\0> {plus} <binary object data>.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
The structured objects can further have their structure and
connectivity to other objects verified. This is generally done with
user-manual: fsck-objects -> fsck There seems to be an agreement to rename fsck-objects to fsck. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:31:47 +08:00
the `git-fsck` program, which generates a full dependency graph
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
of all objects, and verifies their internal consistency (in addition
to just verifying their superficial consistency through the hash).
The object types in some more detail:
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[blob-object]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Blob Object
-----------
A "blob" object is nothing but a binary blob of data, and doesn't
refer to anything else. There is no signature or any other
verification of the data, so while the object is consistent (it 'is'
indexed by its sha1 hash, so the data itself is certainly correct), it
has absolutely no other attributes. No name associations, no
permissions. It is purely a blob of data (i.e. normally "file
contents").
In particular, since the blob is entirely defined by its data, if two
files in a directory tree (or in multiple different versions of the
repository) have the same contents, they will share the same blob
object. The object is totally independent of its location in the
directory tree, and renaming a file does not change the object that
file is associated with in any way.
A blob is typically created when gitlink:git-update-index[1]
is run, and its data can be accessed by gitlink:git-cat-file[1].
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[tree-object]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Tree Object
-----------
The next hierarchical object type is the "tree" object. A tree object
is a list of mode/name/blob data, sorted by name. Alternatively, the
mode data may specify a directory mode, in which case instead of
naming a blob, that name is associated with another TREE object.
Like the "blob" object, a tree object is uniquely determined by the
set contents, and so two separate but identical trees will always
share the exact same object. This is true at all levels, i.e. it's
true for a "leaf" tree (which does not refer to any other trees, only
blobs) as well as for a whole subdirectory.
For that reason a "tree" object is just a pure data abstraction: it
has no history, no signatures, no verification of validity, except
that since the contents are again protected by the hash itself, we can
trust that the tree is immutable and its contents never change.
So you can trust the contents of a tree to be valid, the same way you
can trust the contents of a blob, but you don't know where those
contents 'came' from.
Side note on trees: since a "tree" object is a sorted list of
"filename+content", you can create a diff between two trees without
actually having to unpack two trees. Just ignore all common parts,
and your diff will look right. In other words, you can effectively
(and efficiently) tell the difference between any two random trees by
O(n) where "n" is the size of the difference, rather than the size of
the tree.
Side note 2 on trees: since the name of a "blob" depends entirely and
exclusively on its contents (i.e. there are no names or permissions
involved), you can see trivial renames or permission changes by
noticing that the blob stayed the same. However, renames with data
changes need a smarter "diff" implementation.
A tree is created with gitlink:git-write-tree[1] and
its data can be accessed by gitlink:git-ls-tree[1].
Two trees can be compared with gitlink:git-diff-tree[1].
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[commit-object]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Commit Object
-------------
The "commit" object is an object that introduces the notion of
history into the picture. In contrast to the other objects, it
doesn't just describe the physical state of a tree, it describes how
we got there, and why.
A "commit" is defined by the tree-object that it results in, the
parent commits (zero, one or more) that led up to that point, and a
comment on what happened. Again, a commit is not trusted per se:
the contents are well-defined and "safe" due to the cryptographically
strong signatures at all levels, but there is no reason to believe
that the tree is "good" or that the merge information makes sense.
The parents do not have to actually have any relationship with the
result, for example.
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
Note on commits: unlike some SCM's, commits do not contain
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
rename information or file mode change information. All of that is
implicit in the trees involved (the result tree, and the result trees
of the parents), and describing that makes no sense in this idiotic
file manager.
A commit is created with gitlink:git-commit-tree[1] and
its data can be accessed by gitlink:git-cat-file[1].
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[trust]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Trust
-----
An aside on the notion of "trust". Trust is really outside the scope
of "git", but it's worth noting a few things. First off, since
everything is hashed with SHA1, you 'can' trust that an object is
intact and has not been messed with by external sources. So the name
of an object uniquely identifies a known state - just not a state that
you may want to trust.
Furthermore, since the SHA1 signature of a commit refers to the
SHA1 signatures of the tree it is associated with and the signatures
of the parent, a single named commit specifies uniquely a whole set
of history, with full contents. You can't later fake any step of the
way once you have the name of a commit.
So to introduce some real trust in the system, the only thing you need
to do is to digitally sign just 'one' special note, which includes the
name of a top-level commit. Your digital signature shows others
that you trust that commit, and the immutability of the history of
commits tells others that they can trust the whole history.
In other words, you can easily validate a whole archive by just
sending out a single email that tells the people the name (SHA1 hash)
of the top commit, and digitally sign that email using something
like GPG/PGP.
To assist in this, git also provides the tag object...
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[tag-object]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Tag Object
----------
Git provides the "tag" object to simplify creating, managing and
exchanging symbolic and signed tokens. The "tag" object at its
simplest simply symbolically identifies another object by containing
the sha1, type and symbolic name.
However it can optionally contain additional signature information
(which git doesn't care about as long as there's less than 8k of
it). This can then be verified externally to git.
Note that despite the tag features, "git" itself only handles content
integrity; the trust framework (and signature provision and
verification) has to come from outside.
A tag is created with gitlink:git-mktag[1],
its data can be accessed by gitlink:git-cat-file[1],
and the signature can be verified by
gitlink:git-verify-tag[1].
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[the-index]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
The "index" aka "Current Directory Cache"
-----------------------------------------
The index is a simple binary file, which contains an efficient
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
representation of the contents of a virtual directory. It
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
does so by a simple array that associates a set of names, dates,
permissions and content (aka "blob") objects together. The cache is
always kept ordered by name, and names are unique (with a few very
specific rules) at any point in time, but the cache has no long-term
meaning, and can be partially updated at any time.
In particular, the index certainly does not need to be consistent with
the current directory contents (in fact, most operations will depend on
different ways to make the index 'not' be consistent with the directory
hierarchy), but it has three very important attributes:
'(a) it can re-generate the full state it caches (not just the
directory structure: it contains pointers to the "blob" objects so
that it can regenerate the data too)'
As a special case, there is a clear and unambiguous one-way mapping
from a current directory cache to a "tree object", which can be
efficiently created from just the current directory cache without
actually looking at any other data. So a directory cache at any one
time uniquely specifies one and only one "tree" object (but has
additional data to make it easy to match up that tree object with what
has happened in the directory)
'(b) it has efficient methods for finding inconsistencies between that
cached state ("tree object waiting to be instantiated") and the
current state.'
'(c) it can additionally efficiently represent information about merge
conflicts between different tree objects, allowing each pathname to be
associated with sufficient information about the trees involved that
you can create a three-way merge between them.'
Fix minor typos/grammar in user-manual.txt Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28 12:13:09 +08:00
Those are the ONLY three things that the directory cache does. It's a
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
cache, and the normal operation is to re-generate it completely from a
known tree object, or update/compare it with a live tree that is being
developed. If you blow the directory cache away entirely, you generally
haven't lost any information as long as you have the name of the tree
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
that it described.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Fixed a formulation mistake in Documentation/user-manual.txt This one fixes a small formulation weirdness in Documentation/user-manual.txt Signed-off-by: Marcus Fritzsch <m@fritschy.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-06 15:02:20 +08:00
At the same time, the index is also the staging area for creating
new trees, and creating a new tree always involves a controlled
modification of the index file. In particular, the index file can
have the representation of an intermediate tree that has not yet been
instantiated. So the index can be thought of as a write-back cache,
which can contain dirty information that has not yet been written back
to the backing store.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[the-workflow]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
The Workflow
------------
Generally, all "git" operations work on the index file. Some operations
work *purely* on the index file (showing the current state of the
index), but most operations move data to and from the index file. Either
from the database or from the working directory. Thus there are four
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
main combinations:
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[working-directory-to-index]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
working directory -> index
~~~~~~~~~~~~~~~~~~~~~~~~~~
You update the index with information from the working directory with
the gitlink:git-update-index[1] command. You
generally update the index information by just specifying the filename
you want to update, like so:
-------------------------------------------------
$ git-update-index filename
-------------------------------------------------
but to avoid common mistakes with filename globbing etc, the command
will not normally add totally new entries or remove old entries,
i.e. it will normally just update existing cache entries.
To tell git that yes, you really do realize that certain files no
longer exist, or that new files should be added, you
should use the `--remove` and `--add` flags respectively.
NOTE! A `--remove` flag does 'not' mean that subsequent filenames will
necessarily be removed: if the files still exist in your directory
structure, the index will be updated with their new status, not
removed. The only thing `--remove` means is that update-cache will be
considering a removed file to be a valid thing, and if the file really
does not exist any more, it will update the index accordingly.
As a special case, you can also do `git-update-index --refresh`, which
will refresh the "stat" information of each index to match the current
stat information. It will 'not' update the object status itself, and
it will only update the fields that are used to quickly test whether
an object still matches its old backing store object.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[index-to-object-database]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
index -> object database
~~~~~~~~~~~~~~~~~~~~~~~~
You write your current index file to a "tree" object with the program
-------------------------------------------------
$ git-write-tree
-------------------------------------------------
that doesn't come with any options - it will just write out the
current index into the set of tree objects that describe that state,
and it will return the name of the resulting top-level tree. You can
use that tree to re-generate the index at any time by going in the
other direction:
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[object-database-to-index]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
object database -> index
~~~~~~~~~~~~~~~~~~~~~~~~
You read a "tree" file from the object database, and use that to
populate (and overwrite - don't do this if your index contains any
unsaved state that you might want to restore later!) your current
index. Normal operation is just
-------------------------------------------------
$ git-read-tree <sha1 of tree>
-------------------------------------------------
and your index file will now be equivalent to the tree that you saved
earlier. However, that is only your 'index' file: your working
directory contents have not been modified.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[index-to-working-directory]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
index -> working directory
~~~~~~~~~~~~~~~~~~~~~~~~~~
You update your working directory from the index by "checking out"
files. This is not a very common operation, since normally you'd just
keep your files updated, and rather than write to your working
directory, you'd tell the index files about the changes in your
working directory (i.e. `git-update-index`).
However, if you decide to jump to a new version, or check out somebody
else's version, or just restore a previous tree, you'd populate your
index file with read-tree, and then you need to check out the result
with
-------------------------------------------------
$ git-checkout-index filename
-------------------------------------------------
or, if you want to check out all of the index, use `-a`.
NOTE! git-checkout-index normally refuses to overwrite old files, so
if you have an old version of the tree already checked out, you will
need to use the "-f" flag ('before' the "-a" flag or the filename) to
'force' the checkout.
Finally, there are a few odds and ends which are not purely moving
from one representation to the other:
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[tying-it-all-together]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Tying it all together
~~~~~~~~~~~~~~~~~~~~~
To commit a tree you have instantiated with "git-write-tree", you'd
create a "commit" object that refers to that tree and the history
behind it - most notably the "parent" commits that preceded it in
history.
Normally a "commit" has one parent: the previous state of the tree
before a certain change was made. However, sometimes it can have two
or more parent commits, in which case we call it a "merge", due to the
fact that such a commit brings together ("merges") two or more
previous states represented by other commits.
In other words, while a "tree" represents a particular directory state
of a working directory, a "commit" represents that state in "time",
and explains how we got there.
You create a commit object by giving it the tree that describes the
state at the time of the commit, and a list of parents:
-------------------------------------------------
$ git-commit-tree <tree> -p <parent> [-p <parent2> ..]
-------------------------------------------------
and then giving the reason for the commit on stdin (either through
redirection from a pipe or file, or by just typing it at the tty).
git-commit-tree will return the name of the object that represents
that commit, and you should save it away for later use. Normally,
you'd commit a new `HEAD` state, and while git doesn't care where you
save the note about that state, in practice we tend to just write the
result to the file pointed at by `.git/HEAD`, so that we can always see
what the last committed state was.
Here is an ASCII art by Jon Loeliger that illustrates how
various pieces fit together.
------------
commit-tree
commit obj
+----+
| |
| |
V V
+-----------+
| Object DB |
| Backing |
| Store |
+-----------+
^
write-tree | |
tree obj | |
| | read-tree
| | tree obj
V
+-----------+
| Index |
| "cache" |
+-----------+
update-index ^
blob obj | |
| |
checkout-index -u | | checkout-index
stat | | blob obj
V
+-----------+
| Working |
| Directory |
+-----------+
------------
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[examining-the-data]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Examining the data
------------------
You can examine the data represented in the object database and the
index with various helper tools. For every object, you can use
gitlink:git-cat-file[1] to examine details about the
object:
-------------------------------------------------
$ git-cat-file -t <objectname>
-------------------------------------------------
shows the type of the object, and once you have the type (which is
usually implicit in where you find the object), you can use
-------------------------------------------------
$ git-cat-file blob|tree|commit|tag <objectname>
-------------------------------------------------
to show its contents. NOTE! Trees have binary content, and as a result
there is a special helper for showing that content, called
`git-ls-tree`, which turns the binary content into a more easily
readable form.
It's especially instructive to look at "commit" objects, since those
tend to be small and fairly self-explanatory. In particular, if you
follow the convention of having the top commit name in `.git/HEAD`,
you can do
-------------------------------------------------
$ git-cat-file commit HEAD
-------------------------------------------------
to see what the top commit was.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[merging-multiple-trees]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Merging multiple trees
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
----------------------
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Git helps you do a three-way merge, which you can expand to n-way by
repeating the merge procedure arbitrary times until you finally
"commit" the state. The normal situation is that you'd only do one
three-way merge (two parents), and commit it, but if you like to, you
can do multiple parents in one go.
To do a three-way merge, you need the two sets of "commit" objects
that you want to merge, use those to find the closest common parent (a
third "commit" object), and then use those commit objects to find the
state of the directory ("tree" object) at these points.
To get the "base" for the merge, you first look up the common parent
of two commits with
-------------------------------------------------
$ git-merge-base <commit1> <commit2>
-------------------------------------------------
which will return you the commit they are both based on. You should
now look up the "tree" objects of those commits, which you can easily
do with (for example)
-------------------------------------------------
$ git-cat-file commit <commitname> | head -1
-------------------------------------------------
since the tree object information is always the first line in a commit
object.
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
Once you know the three trees you are going to merge (the one "original"
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
tree, aka the common tree, and the two "result" trees, aka the branches
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
you want to merge), you do a "merge" read into the index. This will
complain if it has to throw away your old index contents, so you should
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
make sure that you've committed those - in fact you would normally
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
always do a merge against your last commit (which should thus match what
you have in your current index anyway).
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
To do the merge, do
-------------------------------------------------
$ git-read-tree -m -u <origtree> <yourtree> <targettree>
-------------------------------------------------
which will do all trivial merge operations for you directly in the
index file, and you can just write the result out with
`git-write-tree`.
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[merging-multiple-trees-2]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
Merging multiple trees, continued
---------------------------------
Sadly, many merges aren't trivial. If there are files that have
been added.moved or removed, or if both branches have modified the
same file, you will be left with an index tree that contains "merge
entries" in it. Such an index tree can 'NOT' be written out to a tree
object, and you will have to resolve any such merge clashes using
other tools before you can write out the result.
You can examine such index state with `git-ls-files --unmerged`
command. An example:
------------------------------------------------
$ git-read-tree -m $orig HEAD $target
$ git-ls-files --unmerged
100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello.c
100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello.c
100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello.c
------------------------------------------------
Each line of the `git-ls-files --unmerged` output begins with
the blob mode bits, blob SHA1, 'stage number', and the
filename. The 'stage number' is git's way to say which tree it
came from: stage 1 corresponds to `$orig` tree, stage 2 `HEAD`
tree, and stage3 `$target` tree.
Earlier we said that trivial merges are done inside
`git-read-tree -m`. For example, if the file did not change
from `$orig` to `HEAD` nor `$target`, or if the file changed
from `$orig` to `HEAD` and `$orig` to `$target` the same way,
obviously the final outcome is what is in `HEAD`. What the
above example shows is that file `hello.c` was changed from
`$orig` to `HEAD` and `$orig` to `$target` in a different way.
You could resolve this by running your favorite 3-way merge
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
program, e.g. `diff3`, `merge`, or git's own merge-file, on
the blob objects from these three stages yourself, like this:
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
------------------------------------------------
$ git-cat-file blob 263414f... >hello.c~1
$ git-cat-file blob 06fa6a2... >hello.c~2
$ git-cat-file blob cc44c73... >hello.c~3
user-manual: miscellaneous editing I cherry-picked some additional miscellaneous fixes from those suggested by Santi Béjar, including fixes to: - correct discussion of repository/HEAD->repository shortcut - add mention of git-mergetool - add mention of --track - mention "-f" as well as "+" for fetch Cc: Santi Béjar <sbejar@gmail.com> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-07 12:56:45 +08:00
$ git merge-file hello.c~2 hello.c~1 hello.c~3
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
------------------------------------------------
This would leave the merge result in `hello.c~2` file, along
with conflict markers if there are conflicts. After verifying
the merge result makes sense, you can tell git what the final
merge result for this file is by:
-------------------------------------------------
$ mv -f hello.c~2 hello.c
$ git-update-index hello.c
-------------------------------------------------
When a path is in unmerged state, running `git-update-index` for
that path tells git to mark the path resolved.
The above is the description of a git merge at the lowest level,
to help you understand what conceptually happens under the hood.
In practice, nobody, not even git itself, uses three `git-cat-file`
for this. There is `git-merge-index` program that extracts the
stages to temporary files and calls a "merge" script on it:
-------------------------------------------------
$ git-merge-index git-merge-one-file hello.c
-------------------------------------------------
Remove git-resolve. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-08 02:37:03 +08:00
and that is what higher level `git merge -s resolve` is implemented with.
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[pack-files]]
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
How git stores objects efficiently: pack files
----------------------------------------------
We've seen how git stores each object in a file named after the
object's SHA1 hash.
Unfortunately this system becomes inefficient once a project has a
lot of objects. Try this on an old project:
------------------------------------------------
$ git count-objects
6930 objects, 47620 kilobytes
------------------------------------------------
The first number is the number of objects which are kept in
individual files. The second is the amount of space taken up by
those "loose" objects.
You can save space and make git faster by moving these loose objects in
to a "pack file", which stores a group of objects in an efficient
compressed format; the details of how pack files are formatted can be
found in link:technical/pack-format.txt[technical/pack-format.txt].
To put the loose objects into a pack, just run git repack:
------------------------------------------------
$ git repack
Generating pack...
Done counting 6020 objects.
Deltifying 6020 objects.
100% (6020/6020) done
Writing 6020 objects.
100% (6020/6020) done
Total 6020, written 6020 (delta 4070), reused 0 (delta 0)
Pack pack-3e54ad29d5b2e05838c75df582c65257b8d08e1c created.
------------------------------------------------
You can then run
------------------------------------------------
$ git prune
------------------------------------------------
to remove any of the "loose" objects that are now contained in the
pack. This will also remove any unreferenced objects (which may be
created when, for example, you use "git reset" to remove a commit).
You can verify that the loose objects are gone by looking at the
.git/objects directory or by running
------------------------------------------------
$ git count-objects
0 objects, 0 kilobytes
------------------------------------------------
Although the object files are gone, any commands that refer to those
objects will work exactly as they did before.
The gitlink:git-gc[1] command performs packing, pruning, and more for
you, so is normally the only high-level command you need.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
[[dangling-objects]]
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
Dangling objects
user-manual: fix a header level Oops. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 13:45:33 +08:00
----------------
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
user-manual: fsck-objects -> fsck There seems to be an agreement to rename fsck-objects to fsck. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:31:47 +08:00
The gitlink:git-fsck[1] command will sometimes complain about dangling
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
objects. They are not a problem.
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
The most common cause of dangling objects is that you've rebased a
branch, or you have pulled from somebody else who rebased a branch--see
<<cleaning-up-history>>. In that case, the old head of the original
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
branch still exists, as does everything it pointed to. The branch
pointer itself just doesn't, since you replaced it with another one.
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
There are also other situations that cause dangling objects. For
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
example, a "dangling blob" may arise because you did a "git add" of a
file, but then, before you actually committed it and made it part of the
bigger picture, you changed something else in that file and committed
that *updated* thing - the old state that you added originally ends up
not being pointed to by any commit or tree, so it's now a dangling blob
object.
Similarly, when the "recursive" merge strategy runs, and finds that
there are criss-cross merges and thus more than one merge base (which is
fairly unusual, but it does happen), it will generate one temporary
midway tree (or possibly even more, if you had lots of criss-crossing
merges and more than two merge bases) as a temporary internal merge
base, and again, those are real objects, but the end result will not end
up pointing to them, so they end up "dangling" in your repository.
Generally, dangling objects aren't anything to worry about. They can
even be very useful: if you screw something up, the dangling objects can
be how you recover your old tree (say, you did a rebase, and realized
that you really didn't want to - you can look at what dangling objects
you have, and decide to reset your head to some old dangling state).
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
For commits, you can just use:
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
------------------------------------------------
$ gitk <dangling-commit-sha-goes-here> --not --all
------------------------------------------------
user-manual: clean up fast-forward and dangling-objects sections The previous commit calls attention to the fact that we have two sections each devoted to fast-forwards and to dangling objects. Revise and attempt to differentiate them a bit. Some more reorganization may be required later.... Signed-off-by: J. Bruce Fields
2007-04-30 23:11:02 +08:00
This asks for all the history reachable from the given commit but not
from any branch, tag, or other reference. If you decide it's something
you want, you can always create a new reference to it, e.g.,
------------------------------------------------
$ git branch recovered-branch <dangling-commit-sha-goes-here>
------------------------------------------------
For blobs and trees, you can't do the same, but you can still examine
them. You can just do
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
------------------------------------------------
$ git show <dangling-blob/tree-sha-goes-here>
------------------------------------------------
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
to show what the contents of the blob were (or, for a tree, basically
what the "ls" for that directory was), and that may give you some idea
of what the operation was that left that dangling object.
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
Usually, dangling blobs and trees aren't very interesting. They're
almost always the result of either being a half-way mergebase (the blob
will often even have the conflict markers from a merge in it, if you
have had conflicting merges that you fixed up by hand), or simply
because you interrupted a "git fetch" with ^C or something like that,
leaving _some_ of the new objects in the object database, but just
dangling and useless.
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
Anyway, once you are sure that you're not interested in any dangling
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
state, you can just prune all unreachable objects:
------------------------------------------------
$ git prune
------------------------------------------------
user-manual: rewrap a few long lines Rewrap some long lines. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:33:55 +08:00
and they'll be gone. But you should only run "git prune" on a quiescent
repository - it's kind of like doing a filesystem fsck recovery: you
don't want to do that while the filesystem is mounted.
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
War on whitespace This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 15:04:01 +08:00
(The same is true of "git-fsck" itself, btw - but since
git-fsck never actually *changes* the repository, it just reports
on what it found, git-fsck itself is never "dangerous" to run.
Running it while somebody is actually changing the repository can cause
confusing and scary messages, but it won't actually do anything bad. In
contrast, running "git prune" while somebody is actively changing the
user-manual: git-fsck, dangling objects Initial import of fsck and dangling objects discussion, mostly lifted from an email from Linus. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 12:29:19 +08:00
repository is a *BAD* idea).
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
[[birdview-on-the-source-code]]
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
A birds-eye view of Git's source code
-------------------------------------
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
It is not always easy for new developers to find their way through Git's
source code. This section gives you a little guidance to show where to
start.
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
A good place to start is with the contents of the initial commit, with:
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
----------------------------------------------------
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
$ git checkout e83c5163
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
----------------------------------------------------
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
The initial revision lays the foundation for almost everything git has
today, but is small enough to read in one sitting.
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
Note that terminology has changed since that revision. For example, the
README in that revision uses the word "changeset" to describe what we
now call a <<def_commit_object,commit>>.
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
Also, we do not call it "cache" any more, but "index", however, the
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
file is still called `cache.h`. Remark: Not much reason to change it now,
especially since there is no good single name for it anyway, because it is
basically _the_ header file which is included by _all_ of Git's C sources.
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
If you grasp the ideas in that initial commit, you should check out a
more recent version and skim `cache.h`, `object.h` and `commit.h`.
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
In the early days, Git (in the tradition of UNIX) was a bunch of programs
which were extremely simple, and which you used in scripts, piping the
output of one into another. This turned out to be good for initial
development, since it was easier to test new things. However, recently
many of these parts have become builtins, and some of the core has been
"libified", i.e. put into libgit.a for performance, portability reasons,
and to avoid code duplication.
By now, you know what the index is (and find the corresponding data
structures in `cache.h`), and that there are just a couple of object types
(blobs, trees, commits and tags) which inherit their common structure from
`struct object`, which is their first member (and thus, you can cast e.g.
`(struct object *)commit` to achieve the _same_ as `&commit->object`, i.e.
get at the object name and flags).
Now is a good point to take a break to let this information sink in.
Next step: get familiar with the object naming. Read <<naming-commits>>.
There are quite a few ways to name an object (and not only revisions!).
All of these are handled in `sha1_name.c`. Just have a quick look at
the function `get_sha1()`. A lot of the special handling is done by
functions like `get_sha1_basic()` or the likes.
This is just to get you into the groove for the most libified part of Git:
the revision walker.
Basically, the initial version of `git log` was a shell script:
----------------------------------------------------------------
$ git-rev-list --pretty $(git-rev-parse --default HEAD "$@") | \
LESS=-S ${PAGER:-less}
----------------------------------------------------------------
What does this mean?
`git-rev-list` is the original version of the revision walker, which
_always_ printed a list of revisions to stdout. It is still functional,
and needs to, since most new Git programs start out as scripts using
`git-rev-list`.
`git-rev-parse` is not as important any more; it was only used to filter out
options that were relevant for the different plumbing commands that were
called by the script.
Most of what `git-rev-list` did is contained in `revision.c` and
`revision.h`. It wraps the options in a struct named `rev_info`, which
controls how and what revisions are walked, and more.
The original job of `git-rev-parse` is now taken by the function
`setup_revisions()`, which parses the revisions and the common command line
options for the revision walker. This information is stored in the struct
`rev_info` for later consumption. You can do your own command line option
parsing after calling `setup_revisions()`. After that, you have to call
`prepare_revision_walk()` for initialization, and then you can get the
commits one by one with the function `get_revision()`.
If you are interested in more details of the revision walking process,
just have a look at the first implementation of `cmd_log()`; call
`git-show v1.3.0~155^2~4` and scroll down to that function (note that you
no longer need to call `setup_pager()` directly).
Nowadays, `git log` is a builtin, which means that it is _contained_ in the
command `git`. The source side of a builtin is
- a function called `cmd_<bla>`, typically defined in `builtin-<bla>.c`,
and declared in `builtin.h`,
- an entry in the `commands[]` array in `git.c`, and
- an entry in `BUILTIN_OBJECTS` in the `Makefile`.
Sometimes, more than one builtin is contained in one source file. For
example, `cmd_whatchanged()` and `cmd_log()` both reside in `builtin-log.c`,
since they share quite a bit of code. In that case, the commands which are
_not_ named like the `.c` file in which they live have to be listed in
`BUILT_INS` in the `Makefile`.
`git log` looks more complicated in C than it does in the original script,
but that allows for a much greater flexibility and performance.
Here again it is a good point to take a pause.
Lesson three is: study the code. Really, it is the best way to learn about
the organization of Git (after you know the basic concepts).
So, think about something which you are interested in, say, "how can I
access a blob just knowing the object name of it?". The first step is to
find a Git command with which you can do it. In this example, it is either
`git show` or `git cat-file`.
For the sake of clarity, let's stay with `git cat-file`, because it
- is plumbing, and
- was around even in the initial commit (it literally went only through
some 20 revisions as `cat-file.c`, was renamed to `builtin-cat-file.c`
when made a builtin, and then saw less than 10 versions).
So, look into `builtin-cat-file.c`, search for `cmd_cat_file()` and look what
it does.
------------------------------------------------------------------
git_config(git_default_config);
if (argc != 3)
usage("git-cat-file [-t|-s|-e|-p|<type>] <sha1>");
if (get_sha1(argv[2], sha1))
die("Not a valid object name %s", argv[2]);
------------------------------------------------------------------
Let's skip over the obvious details; the only really interesting part
here is the call to `get_sha1()`. It tries to interpret `argv[2]` as an
object name, and if it refers to an object which is present in the current
repository, it writes the resulting SHA-1 into the variable `sha1`.
Two things are interesting here:
- `get_sha1()` returns 0 on _success_. This might surprise some new
Git hackers, but there is a long tradition in UNIX to return different
negative numbers in case of different errors -- and 0 on success.
- the variable `sha1` in the function signature of `get_sha1()` is `unsigned
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
char \*`, but is actually expected to be a pointer to `unsigned
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
char[20]`. This variable will contain the 160-bit SHA-1 of the given
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
commit. Note that whenever a SHA-1 is passed as `unsigned char \*`, it
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
is the binary representation, as opposed to the ASCII representation in
user-manual: revise birdseye-view chapter Some revisions suggested by Junio along with some minor style fixes and one compile fix (asterisks need escaping). Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 07:48:31 +08:00
hex characters, which is passed as `char *`.
Add a birdview-on-the-source-code section to the user manual In http://thread.gmane.org/gmane.comp.version-control.git/42479, a birdview on the source code was requested. J. Bruce Fields suggested that my reply should be included in the user manual, and there was nothing of an outcry, so here it is, not 2 months later. It includes modifications as suggested by J. Bruce Fields, Karl Hasselström and Daniel Barkalow. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2007-05-10 18:36:15 +08:00
You will see both of these things throughout the code.
Now, for the meat:
-----------------------------------------------------------------------------
case 0:
buf = read_object_with_reference(sha1, argv[1], &size, NULL);
-----------------------------------------------------------------------------
This is how you read a blob (actually, not only a blob, but any type of
object). To know how the function `read_object_with_reference()` actually
works, find the source code for it (something like `git grep
read_object_with | grep ":[a-z]"` in the git repository), and read
the source.
To find out how the result can be used, just read on in `cmd_cat_file()`:
-----------------------------------
write_or_die(1, buf, size);
-----------------------------------
Sometimes, you do not know where to look for a feature. In many such cases,
it helps to search through the output of `git log`, and then `git show` the
corresponding commit.
Example: If you know that there was some test case for `git bundle`, but
do not remember where it was (yes, you _could_ `git grep bundle t/`, but that
does not illustrate the point!):
------------------------
$ git log --no-merges t/
------------------------
In the pager (`less`), just search for "bundle", go a few lines back,
and see that it is in commit 18449ab0... Now just copy this object name,
and paste it into the command line
-------------------
$ git show 18449ab0
-------------------
Voila.
Another example: Find out what to do in order to make some script a
builtin:
-------------------------------------------------
$ git log --no-merges --diff-filter=A builtin-*.c
-------------------------------------------------
You see, Git is actually the best tool to find out about the source of Git
itself!
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[glossary]]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
include::glossary.txt[]
user-manual: move quick-start to an appendix The quick start interrupts the flow of the manual a bit. Move it to "appendix A" but add a reference to it in the preface. Also rename the todo chapter to "appendix B", and revise the preface a little. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 10:55:40 +08:00
[[git-quick-start]]
user-manual: quick-start updates Update text to reflect new position in appendix. Update the name to reflect the fact that this is closer to reference than tutorial documentation (as suggested by Jonas Fonseca). Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-06 06:33:27 +08:00
Appendix A: Git Quick Reference
===============================
user-manual: move quick-start to an appendix The quick start interrupts the flow of the manual a bit. Move it to "appendix A" but add a reference to it in the preface. Also rename the todo chapter to "appendix B", and revise the preface a little. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 10:55:40 +08:00
user-manual: quick-start updates Update text to reflect new position in appendix. Update the name to reflect the fact that this is closer to reference than tutorial documentation (as suggested by Jonas Fonseca). Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-06-06 06:33:27 +08:00
This is a quick summary of the major commands; the previous chapters
explain how these work in more detail.
user-manual: move quick-start to an appendix The quick start interrupts the flow of the manual a bit. Move it to "appendix A" but add a reference to it in the preface. Also rename the todo chapter to "appendix B", and revise the preface a little. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 10:55:40 +08:00
[[quick-creating-a-new-repository]]
Creating a new repository
-------------------------
From a tarball:
-----------------------------------------------
$ tar xzf project.tar.gz
$ cd project
$ git init
Initialized empty Git repository in .git/
$ git add .
$ git commit
-----------------------------------------------
From a remote repository:
-----------------------------------------------
$ git clone git://example.com/pub/project.git
$ cd project
-----------------------------------------------
[[managing-branches]]
Managing branches
-----------------
-----------------------------------------------
$ git branch # list all local branches in this repo
$ git checkout test # switch working directory to branch "test"
$ git branch new # create branch "new" starting at current HEAD
$ git branch -d new # delete branch "new"
-----------------------------------------------
Instead of basing new branch on current HEAD (the default), use:
-----------------------------------------------
$ git branch new test # branch named "test"
$ git branch new v2.6.15 # tag named v2.6.15
$ git branch new HEAD^ # commit before the most recent
$ git branch new HEAD^^ # commit before that
$ git branch new test~10 # ten commits before tip of branch "test"
-----------------------------------------------
Create and switch to a new branch at the same time:
-----------------------------------------------
$ git checkout -b new v2.6.15
-----------------------------------------------
Update and examine branches from the repository you cloned from:
-----------------------------------------------
$ git fetch # update
$ git branch -r # list
origin/master
origin/next
...
$ git checkout -b masterwork origin/master
-----------------------------------------------
Fetch a branch from a different repository, and give it a new
name in your repository:
-----------------------------------------------
$ git fetch git://example.com/project.git theirbranch:mybranch
$ git fetch git://example.com/project.git v2.6.15:mybranch
-----------------------------------------------
Keep a list of repositories you work with regularly:
-----------------------------------------------
$ git remote add example git://example.com/project.git
$ git remote # list remote repositories
example
origin
$ git remote show example # get details
* remote example
URL: git://example.com/project.git
Tracked remote branches
master next ...
$ git fetch example # update branches from example
$ git branch -r # list all remote branches
-----------------------------------------------
[[exploring-history]]
Exploring history
-----------------
-----------------------------------------------
$ gitk # visualize and browse history
$ git log # list all commits
$ git log src/ # ...modifying src/
$ git log v2.6.15..v2.6.16 # ...in v2.6.16, not in v2.6.15
$ git log master..test # ...in branch test, not in branch master
$ git log test..master # ...in branch master, but not in test
$ git log test...master # ...in one branch, not in both
$ git log -S'foo()' # ...where difference contain "foo()"
$ git log --since="2 weeks ago"
$ git log -p # show patches as well
$ git show # most recent commit
$ git diff v2.6.15..v2.6.16 # diff between two tagged versions
$ git diff v2.6.15..HEAD # diff with current head
$ git grep "foo()" # search working directory for "foo()"
$ git grep v2.6.15 "foo()" # search old tree for "foo()"
$ git show v2.6.15:a.txt # look at old version of a.txt
-----------------------------------------------
Search for regressions:
-----------------------------------------------
$ git bisect start
$ git bisect bad # current version is bad
$ git bisect good v2.6.13-rc2 # last known good revision
Bisecting: 675 revisions left to test after this
# test here, then:
$ git bisect good # if this revision is good, or
$ git bisect bad # if this revision is bad.
# repeat until done.
-----------------------------------------------
[[making-changes]]
Making changes
--------------
Make sure git knows who to blame:
------------------------------------------------
$ cat >>~/.gitconfig <<\EOF
[user]
name = Your Name Comes Here
email = you@yourdomain.example.com
EOF
------------------------------------------------
Select file contents to include in the next commit, then make the
commit:
-----------------------------------------------
$ git add a.txt # updated file
$ git add b.txt # new file
$ git rm c.txt # old file
$ git commit
-----------------------------------------------
Or, prepare and create the commit in one step:
-----------------------------------------------
$ git commit d.txt # use latest content only of d.txt
$ git commit -a # use latest content of all tracked files
-----------------------------------------------
[[merging]]
Merging
-------
-----------------------------------------------
$ git merge test # merge branch "test" into the current branch
$ git pull git://example.com/project.git master
# fetch and merge in remote branch
$ git pull . test # equivalent to git merge test
-----------------------------------------------
[[sharing-your-changes]]
Sharing your changes
--------------------
Importing or exporting patches:
-----------------------------------------------
$ git format-patch origin..HEAD # format a patch for each commit
# in HEAD but not in origin
$ git am mbox # import patches from the mailbox "mbox"
-----------------------------------------------
Fetch a branch in a different git repository, then merge into the
current branch:
-----------------------------------------------
$ git pull git://example.com/project.git theirbranch
-----------------------------------------------
Store the fetched branch into a local branch before merging into the
current branch:
-----------------------------------------------
$ git pull git://example.com/project.git theirbranch:mybranch
-----------------------------------------------
After creating commits on a local branch, update the remote
branch with your commits:
-----------------------------------------------
$ git push ssh://example.com/project.git mybranch:theirbranch
-----------------------------------------------
When remote and local branch are both named "test":
-----------------------------------------------
$ git push ssh://example.com/project.git test
-----------------------------------------------
Shortcut version for a frequently used remote repository:
-----------------------------------------------
$ git remote add example ssh://example.com/project.git
$ git push example test
-----------------------------------------------
[[repository-maintenance]]
Repository maintenance
----------------------
Check for corruption:
-----------------------------------------------
$ git fsck
-----------------------------------------------
Recompress, remove unused cruft:
-----------------------------------------------
$ git gc
-----------------------------------------------
user-manual: add section ID's Any section lacking an id gets an annoying warning when you build the manual. More seriously, the table of contents then generates volatile id's which change with every build, with the effect that we get URL's that change all the time. The ID's are manually generated and sometimes inconsistent, but that's OK. XXX: what to do about the preface? Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-04-18 12:46:19 +08:00
[[todo]]
user-manual: move quick-start to an appendix The quick start interrupts the flow of the manual a bit. Move it to "appendix A" but add a reference to it in the preface. Also rename the todo chapter to "appendix B", and revise the preface a little. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-05-13 10:55:40 +08:00
Appendix B: Notes and todo list for this manual
===============================================
Documentation: expand preface and todo's Add a brief description of the organization to the preface, expand the final notes/todo's section, in hopes maybe some others will want to contribute. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 11:58:14 +08:00
This is a work in progress.
The basic requirements:
user-manual: rewrap, fix heading levels Fix some heading levels that prevented compile; rewrap some stuff. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-15 11:43:47 +08:00
- It must be readable in order, from beginning to end, by
someone intelligent with a basic grasp of the unix
commandline, but without any special knowledge of git. If
necessary, any other prerequisites should be specifically
mentioned as they arise.
- Whenever possible, section headings should clearly describe
the task they explain how to do, in language that requires
no more knowledge than necessary: for example, "importing
patches into a project" rather than "the git-am command"
Documentation: expand preface and todo's Add a brief description of the organization to the preface, expand the final notes/todo's section, in hopes maybe some others will want to contribute. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 11:58:14 +08:00
Documentation: begin discussion of git-remote in user manual Start discussion of git-remote. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-09 13:18:09 +08:00
Think about how to create a clear chapter dependency graph that will
allow people to get to important topics without necessarily reading
everything in between.
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Scan Documentation/ for other stuff left out; in particular:
howto's
some of technical/?
hooks
user-manual: todo's Update todo's. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-31 01:48:48 +08:00
list of commands in gitlink:git[1]
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Scan email archives for other stuff left out
Scan man pages to see if any assume more background than this manual
provides.
user-manual: rewrap, fix heading levels Fix some heading levels that prevented compile; rewrap some stuff. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-15 11:43:47 +08:00
Simplify beginning by suggesting disconnected head instead of
user-manual: reorganize fetch discussion, add internals, etc. Keep git remote discussion in the first chapter, but postpone lower-level git fetch usage (to fetch individual branches) till later. Import a bunch of slightly modified text from the readme to give an architectural overview at the end. Add more discussion of history rewriting. And a bunch of other miscellaneous changes.... Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-27 14:03:07 +08:00
temporary branch creation?
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
user-manual: rewrap, fix heading levels Fix some heading levels that prevented compile; rewrap some stuff. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-15 11:43:47 +08:00
Add more good examples. Entire sections of just cookbook examples
might be a good idea; maybe make an "advanced examples" section a
standard end-of-chapter section?
Documentation: add git user's manual The goals are: - Readable from beginning to end in order without having read any other git documentation beforehand. - Helpful section names and cross-references, so it's not too hard to skip around some if you need to. - Organized to allow it to grow much larger (unlike the tutorials) It's more liesurely than tutorial.txt, but tries to stay focused on practical how-to stuff. It adds a discussion of how to resolve merge conflicts, and partial instructions on setting up and dealing with a public repository. I've lifted a little bit from "branching and merging" (e.g., some of the discussion of history diagrams), and could probably steal more if that's OK. (Similarly anyone should of course feel free to reuse bits of this if any parts seem more useful than the whole.) There's a lot of detail on managing branches and using git-fetch, just because those are essential even to people needing read-only access (e.g., kernel testers). I think those sections will be much shorter once the new "git remote" command and the disconnected checkouts are taken into account. I do feel bad about adding yet another piece of documentation, but I we need something that goes through all the basics in a logical order, and I wasn't seeing how to grow the tutorials into that. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-08 08:23:49 +08:00
Include cross-references to the glossary, where appropriate.
user-manual: minor "TODO" updates I still really want a section on interoperability with CVS, subversion, etc., but I'm not getting around to it very fast, so just add this to the TODO section for now. And a few other minor todo updates. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:43:33 +08:00
Document shallow clones? See draft 1.5.0 release notes for some
documentation.
Assorted typo fixes Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-04 12:49:16 +08:00
Add a section on working with other version control systems, including
user-manual: minor "TODO" updates I still really want a section on interoperability with CVS, subversion, etc., but I'm not getting around to it very fast, so just add this to the TODO section for now. And a few other minor todo updates. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-29 14:43:33 +08:00
CVS, Subversion, and just imports of series of release tarballs.
user-manual: point to README for gitweb information I'd like complete gitweb setup instructions some day, but for now just refer to the gitweb README. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-31 01:43:36 +08:00
More details on gitweb?
user-manual: todo's Update todo's. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-01-31 01:48:48 +08:00
Write a chapter on using plumbing and writing scripts.
Documentation: user-manual todo Some more user-manual todo's: how to share objects between repositories, how to recover. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
2007-02-06 15:55:07 +08:00
Alternates, clone -reference, etc.
git unpack-objects -r for recovery
Reference in New Issue Copy Permalink