git/builtin/fetch.c

1168 lines
32 KiB
C
Raw Normal View History

/*
* "git fetch"
*/
#include "cache.h"
#include "refs.h"
#include "commit.h"
#include "builtin.h"
#include "string-list.h"
#include "remote.h"
#include "transport.h"
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
#include "run-command.h"
#include "parse-options.h"
#include "sigchain.h"
#include "transport.h"
#include "submodule.h"
#include "connected.h"
#include "argv-array.h"
static const char * const builtin_fetch_usage[] = {
N_("git fetch [<options>] [<repository> [<refspec>...]]"),
N_("git fetch [<options>] <group>"),
N_("git fetch --multiple [<options>] [(<repository> | <group>)...]"),
N_("git fetch --all [<options>]"),
NULL
};
enum {
TAGS_UNSET = 0,
TAGS_DEFAULT = 1,
TAGS_SET = 2
};
static int fetch_prune_config = -1; /* unspecified */
static int prune = -1; /* unspecified */
#define PRUNE_BY_DEFAULT 0 /* do we prune by default? */
static int all, append, dry_run, force, keep, multiple, update_head_ok, verbosity;
static int progress = -1, recurse_submodules = RECURSE_SUBMODULES_DEFAULT;
static int tags = TAGS_DEFAULT, unshallow;
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
static const char *depth;
static const char *upload_pack;
static struct strbuf default_rla = STRBUF_INIT;
static struct transport *gtransport;
fetch: work around "transport-take-over" hack A Git-aware "connect" transport allows the "transport_take_over" to redirect generic transport requests like fetch(), push_refs() and get_refs_list() to the native Git transport handling methods. The take-over process replaces transport->data with a fake data that these method implementations understand. While this hack works OK for a single request, it breaks when the transport needs to make more than one requests. transport->data that used to hold necessary information for the specific helper to work correctly is destroyed during the take-over process. One codepath that this matters is "git fetch" in auto-follow mode; when it does not get all the tags that ought to point at the history it got (which can be determined by looking at the peeled tags in the initial advertisement) from the primary transfer, it internally makes a second request to complete the fetch. Because "take-over" hack has already destroyed the data necessary to talk to the transport helper by the time this happens, the second request cannot make a request to the helper to make another connection to fetch these additional tags. Mark such a transport as "cannot_reuse", and use a separate transport to perform the backfill fetch in order to work around this breakage. Note that this problem does not manifest itself when running t5802, because our upload-pack gives you all the necessary auto-followed tags during the primary transfer. You would need to step through "git fetch" in a debugger, stop immediately after the primary transfer finishes and writes these auto-followed tags, remove the tag references and repack/prune the repository to convince the "find-non-local-tags" procedure that the primary transfer failed to give us all the necessary tags, and then let it continue, in order to trigger the bug in the secondary transfer this patch fixes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-08 06:47:18 +08:00
static struct transport *gsecondary;
static const char *submodule_prefix = "";
fetch/pull: recurse into submodules when necessary To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-07 06:10:46 +08:00
static const char *recurse_submodules_default;
static int shown_url = 0;
static int option_parse_recurse_submodules(const struct option *opt,
const char *arg, int unset)
{
if (unset) {
recurse_submodules = RECURSE_SUBMODULES_OFF;
} else {
if (arg)
recurse_submodules = parse_fetch_recurse_submodules_arg(opt->long_name, arg);
else
recurse_submodules = RECURSE_SUBMODULES_ON;
}
return 0;
}
static int git_fetch_config(const char *k, const char *v, void *cb)
{
if (!strcmp(k, "fetch.prune")) {
fetch_prune_config = git_config_bool(k, v);
return 0;
}
return 0;
}
static struct option builtin_fetch_options[] = {
OPT__VERBOSITY(&verbosity),
OPT_BOOL(0, "all", &all,
N_("fetch from all remotes")),
OPT_BOOL('a', "append", &append,
N_("append to .git/FETCH_HEAD instead of overwriting")),
OPT_STRING(0, "upload-pack", &upload_pack, N_("path"),
N_("path to upload pack on remote end")),
OPT__FORCE(&force, N_("force overwrite of local branch")),
OPT_BOOL('m', "multiple", &multiple,
N_("fetch from multiple remotes")),
OPT_SET_INT('t', "tags", &tags,
N_("fetch all tags and associated objects"), TAGS_SET),
OPT_SET_INT('n', NULL, &tags,
N_("do not fetch all tags (--no-tags)"), TAGS_UNSET),
OPT_BOOL('p', "prune", &prune,
N_("prune remote-tracking branches no longer on remote")),
{ OPTION_CALLBACK, 0, "recurse-submodules", NULL, N_("on-demand"),
N_("control recursive fetching of submodules"),
PARSE_OPT_OPTARG, option_parse_recurse_submodules },
OPT_BOOL(0, "dry-run", &dry_run,
N_("dry run")),
OPT_BOOL('k', "keep", &keep, N_("keep downloaded pack")),
OPT_BOOL('u', "update-head-ok", &update_head_ok,
N_("allow updating of HEAD ref")),
OPT_BOOL(0, "progress", &progress, N_("force progress reporting")),
OPT_STRING(0, "depth", &depth, N_("depth"),
N_("deepen history of shallow clone")),
{ OPTION_SET_INT, 0, "unshallow", &unshallow, NULL,
N_("convert to a complete repository"),
PARSE_OPT_NONEG | PARSE_OPT_NOARG, NULL, 1 },
{ OPTION_STRING, 0, "submodule-prefix", &submodule_prefix, N_("dir"),
N_("prepend this to submodule path output"), PARSE_OPT_HIDDEN },
fetch/pull: recurse into submodules when necessary To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-07 06:10:46 +08:00
{ OPTION_STRING, 0, "recurse-submodules-default",
&recurse_submodules_default, NULL,
N_("default mode for recursion"), PARSE_OPT_HIDDEN },
OPT_END()
};
static void unlock_pack(void)
{
if (gtransport)
transport_unlock_pack(gtransport);
fetch: work around "transport-take-over" hack A Git-aware "connect" transport allows the "transport_take_over" to redirect generic transport requests like fetch(), push_refs() and get_refs_list() to the native Git transport handling methods. The take-over process replaces transport->data with a fake data that these method implementations understand. While this hack works OK for a single request, it breaks when the transport needs to make more than one requests. transport->data that used to hold necessary information for the specific helper to work correctly is destroyed during the take-over process. One codepath that this matters is "git fetch" in auto-follow mode; when it does not get all the tags that ought to point at the history it got (which can be determined by looking at the peeled tags in the initial advertisement) from the primary transfer, it internally makes a second request to complete the fetch. Because "take-over" hack has already destroyed the data necessary to talk to the transport helper by the time this happens, the second request cannot make a request to the helper to make another connection to fetch these additional tags. Mark such a transport as "cannot_reuse", and use a separate transport to perform the backfill fetch in order to work around this breakage. Note that this problem does not manifest itself when running t5802, because our upload-pack gives you all the necessary auto-followed tags during the primary transfer. You would need to step through "git fetch" in a debugger, stop immediately after the primary transfer finishes and writes these auto-followed tags, remove the tag references and repack/prune the repository to convince the "find-non-local-tags" procedure that the primary transfer failed to give us all the necessary tags, and then let it continue, in order to trigger the bug in the secondary transfer this patch fixes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-08 06:47:18 +08:00
if (gsecondary)
transport_unlock_pack(gsecondary);
}
static void unlock_pack_on_signal(int signo)
{
unlock_pack();
sigchain_pop(signo);
raise(signo);
}
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
static void add_merge_config(struct ref **head,
const struct ref *remote_refs,
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
struct branch *branch,
struct ref ***tail)
{
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
int i;
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
for (i = 0; i < branch->merge_nr; i++) {
struct ref *rm, **old_tail = *tail;
struct refspec refspec;
for (rm = *head; rm; rm = rm->next) {
if (branch_merge_matches(branch, i, rm->name)) {
rm->fetch_head_status = FETCH_HEAD_MERGE;
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
break;
}
}
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
if (rm)
continue;
/*
* Not fetched to a remote-tracking branch? We need to fetch
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
* it anyway to allow this branch's "branch.$name.merge"
* to be honored by 'git pull', but we do not have to
* fail if branch.$name.merge is misconfigured to point
* at a nonexisting branch. If we were indeed called by
* 'git pull', it will notice the misconfiguration because
* there is no entry in the resulting FETCH_HEAD marked
* for merging.
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
*/
memset(&refspec, 0, sizeof(refspec));
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
refspec.src = branch->merge[i]->src;
get_fetch_map(remote_refs, &refspec, tail, 1);
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
for (rm = *old_tail; rm; rm = rm->next)
rm->fetch_head_status = FETCH_HEAD_MERGE;
}
}
static int add_existing(const char *refname, const unsigned char *sha1,
int flag, void *cbdata)
{
struct string_list *list = (struct string_list *)cbdata;
struct string_list_item *item = string_list_insert(list, refname);
item->util = xmalloc(20);
hashcpy(item->util, sha1);
return 0;
}
static int will_fetch(struct ref **head, const unsigned char *sha1)
{
struct ref *rm = *head;
while (rm) {
if (!hashcmp(rm->old_sha1, sha1))
return 1;
rm = rm->next;
}
return 0;
}
static void find_non_local_tags(struct transport *transport,
struct ref **head,
struct ref ***tail)
{
struct string_list existing_refs = STRING_LIST_INIT_DUP;
struct string_list remote_refs = STRING_LIST_INIT_NODUP;
const struct ref *ref;
struct string_list_item *item = NULL;
for_each_ref(add_existing, &existing_refs);
for (ref = transport_get_remote_refs(transport); ref; ref = ref->next) {
if (!starts_with(ref->name, "refs/tags/"))
continue;
/*
* The peeled ref always follows the matching base
* ref, so if we see a peeled ref that we don't want
* to fetch then we can mark the ref entry in the list
* as one to ignore by setting util to NULL.
*/
if (ends_with(ref->name, "^{}")) {
if (item && !has_sha1_file(ref->old_sha1) &&
!will_fetch(head, ref->old_sha1) &&
!has_sha1_file(item->util) &&
!will_fetch(head, item->util))
item->util = NULL;
item = NULL;
continue;
}
/*
* If item is non-NULL here, then we previously saw a
* ref not followed by a peeled reference, so we need
* to check if it is a lightweight tag that we want to
* fetch.
*/
if (item && !has_sha1_file(item->util) &&
!will_fetch(head, item->util))
item->util = NULL;
item = NULL;
/* skip duplicates and refs that we already have */
if (string_list_has_string(&remote_refs, ref->name) ||
string_list_has_string(&existing_refs, ref->name))
continue;
item = string_list_insert(&remote_refs, ref->name);
item->util = (void *)ref->old_sha1;
}
string_list_clear(&existing_refs, 1);
/*
* We may have a final lightweight tag that needs to be
* checked to see if it needs fetching.
*/
if (item && !has_sha1_file(item->util) &&
!will_fetch(head, item->util))
item->util = NULL;
/*
* For all the tags in the remote_refs string list,
* add them to the list of refs to be fetched
*/
for_each_string_list_item(item, &remote_refs) {
/* Unless we have already decided to ignore this item... */
if (item->util)
{
struct ref *rm = alloc_ref(item->string);
rm->peer_ref = alloc_ref(item->string);
hashcpy(rm->old_sha1, item->util);
**tail = rm;
*tail = &rm->next;
}
}
string_list_clear(&remote_refs, 0);
}
static struct ref *get_ref_map(struct transport *transport,
struct refspec *refspecs, int refspec_count,
int tags, int *autotags)
{
int i;
struct ref *rm;
struct ref *ref_map = NULL;
struct ref **tail = &ref_map;
/* opportunistically-updated references: */
struct ref *orefs = NULL, **oref_tail = &orefs;
const struct ref *remote_refs = transport_get_remote_refs(transport);
if (refspec_count) {
for (i = 0; i < refspec_count; i++) {
get_fetch_map(remote_refs, &refspecs[i], &tail, 0);
if (refspecs[i].dst && refspecs[i].dst[0])
*autotags = 1;
}
/* Merge everything on the command line (but not --tags) */
for (rm = ref_map; rm; rm = rm->next)
rm->fetch_head_status = FETCH_HEAD_MERGE;
/*
* For any refs that we happen to be fetching via
* command-line arguments, the destination ref might
* have been missing or have been different than the
* remote-tracking ref that would be derived from the
* configured refspec. In these cases, we want to
* take the opportunity to update their configured
* remote-tracking reference. However, we do not want
* to mention these entries in FETCH_HEAD at all, as
* they would simply be duplicates of existing
* entries, so we set them FETCH_HEAD_IGNORE below.
*
* We compute these entries now, based only on the
* refspecs specified on the command line. But we add
* them to the list following the refspecs resulting
* from the tags option so that one of the latter,
* which has FETCH_HEAD_NOT_FOR_MERGE, is not removed
* by ref_remove_duplicates() in favor of one of these
* opportunistic entries with FETCH_HEAD_IGNORE.
*/
for (i = 0; i < transport->remote->fetch_refspec_nr; i++)
get_fetch_map(ref_map, &transport->remote->fetch[i],
&oref_tail, 1);
if (tags == TAGS_SET)
get_fetch_map(remote_refs, tag_refspec, &tail, 0);
} else {
/* Use the defaults */
struct remote *remote = transport->remote;
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
struct branch *branch = branch_get(NULL);
int has_merge = branch_has_merge_config(branch);
builtin/fetch.c: ignore merge config when not fetching from branch's remote When 'git fetch' is supplied a single argument, it tries to match it against a configured remote and then fetch the refs specified by the named remote's fetchspec. Additionally, or alternatively, if the current branch has a merge ref configured, and if the name of the remote supplied to fetch matches the one in the branch's configuration, then git also adds the merge ref to the list of refs to update. If the argument to fetch does not specify a named remote, or if the name supplied does not match the remote configured for the current branch, then the current branch's merge configuration should not be considered. git currently mishandles the case when the argument to fetch specifies a GIT URL(i.e. not a named remote) and the current branch has a configured merge ref. In this case, fetch should ignore the branch's merge ref and attempt to fetch from the remote repository's HEAD branch. But, since fetch only checks _whether_ the current branch has a merge ref configured, and does _not_ check whether the branch's configured remote matches the command line argument (until later), it will mistakenly enter the wrong branch of an 'if' statement and will not fall back to fetch the HEAD branch. The fetch ends up doing nothing and returns with a successful zero status. Fix this by comparing the remote repository's name to the branch's remote name, in addition to whether it has a configured merge ref, sooner, so that fetch can correctly decide whether the branch's configuration is interesting or not, and fall back to fetching from the remote's HEAD branch when appropriate. This fixes the test in t5510. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-26 01:52:56 +08:00
if (remote &&
(remote->fetch_refspec_nr ||
/* Note: has_merge implies non-NULL branch->remote_name */
builtin/fetch.c: ignore merge config when not fetching from branch's remote When 'git fetch' is supplied a single argument, it tries to match it against a configured remote and then fetch the refs specified by the named remote's fetchspec. Additionally, or alternatively, if the current branch has a merge ref configured, and if the name of the remote supplied to fetch matches the one in the branch's configuration, then git also adds the merge ref to the list of refs to update. If the argument to fetch does not specify a named remote, or if the name supplied does not match the remote configured for the current branch, then the current branch's merge configuration should not be considered. git currently mishandles the case when the argument to fetch specifies a GIT URL(i.e. not a named remote) and the current branch has a configured merge ref. In this case, fetch should ignore the branch's merge ref and attempt to fetch from the remote repository's HEAD branch. But, since fetch only checks _whether_ the current branch has a merge ref configured, and does _not_ check whether the branch's configured remote matches the command line argument (until later), it will mistakenly enter the wrong branch of an 'if' statement and will not fall back to fetch the HEAD branch. The fetch ends up doing nothing and returns with a successful zero status. Fix this by comparing the remote repository's name to the branch's remote name, in addition to whether it has a configured merge ref, sooner, so that fetch can correctly decide whether the branch's configuration is interesting or not, and fall back to fetching from the remote's HEAD branch when appropriate. This fixes the test in t5510. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-26 01:52:56 +08:00
(has_merge && !strcmp(branch->remote_name, remote->name)))) {
for (i = 0; i < remote->fetch_refspec_nr; i++) {
get_fetch_map(remote_refs, &remote->fetch[i], &tail, 0);
if (remote->fetch[i].dst &&
remote->fetch[i].dst[0])
*autotags = 1;
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
if (!i && !has_merge && ref_map &&
!remote->fetch[0].pattern)
ref_map->fetch_head_status = FETCH_HEAD_MERGE;
}
/*
* if the remote we're fetching from is the same
* as given in branch.<name>.remote, we add the
* ref given in branch.<name>.merge, too.
*
* Note: has_merge implies non-NULL branch->remote_name
*/
if (has_merge &&
!strcmp(branch->remote_name, remote->name))
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
add_merge_config(&ref_map, remote_refs, branch, &tail);
} else {
ref_map = get_remote_ref(remote_refs, "HEAD");
if (!ref_map)
die(_("Couldn't find remote ref HEAD"));
ref_map->fetch_head_status = FETCH_HEAD_MERGE;
tail = &ref_map->next;
}
}
if (tags == TAGS_SET)
/* also fetch all tags */
get_fetch_map(remote_refs, tag_refspec, &tail, 0);
else if (tags == TAGS_DEFAULT && *autotags)
find_non_local_tags(transport, &ref_map, &tail);
/* Now append any refs to be updated opportunistically: */
*tail = orefs;
for (rm = orefs; rm; rm = rm->next) {
rm->fetch_head_status = FETCH_HEAD_IGNORE;
tail = &rm->next;
}
return ref_remove_duplicates(ref_map);
}
#define STORE_REF_ERROR_OTHER 1
#define STORE_REF_ERROR_DF_CONFLICT 2
static int s_update_ref(const char *action,
struct ref *ref,
int check_old)
{
char msg[1024];
char *rla = getenv("GIT_REFLOG_ACTION");
static struct ref_lock *lock;
if (dry_run)
return 0;
if (!rla)
rla = default_rla.buf;
snprintf(msg, sizeof(msg), "%s: %s", rla, action);
lock = lock_any_ref_for_update(ref->name,
check_old ? ref->old_sha1 : NULL,
0, NULL);
if (!lock)
return errno == ENOTDIR ? STORE_REF_ERROR_DF_CONFLICT :
STORE_REF_ERROR_OTHER;
if (write_ref_sha1(lock, ref->new_sha1, msg) < 0)
return errno == ENOTDIR ? STORE_REF_ERROR_DF_CONFLICT :
STORE_REF_ERROR_OTHER;
return 0;
}
#define REFCOL_WIDTH 10
static int update_local_ref(struct ref *ref,
const char *remote,
const struct ref *remote_ref,
struct strbuf *display)
{
struct commit *current = NULL, *updated;
enum object_type type;
struct branch *current_branch = branch_get(NULL);
const char *pretty_ref = prettify_refname(ref->name);
type = sha1_object_info(ref->new_sha1, NULL);
if (type < 0)
die(_("object %s not found"), sha1_to_hex(ref->new_sha1));
if (!hashcmp(ref->old_sha1, ref->new_sha1)) {
if (verbosity > 0)
strbuf_addf(display, "= %-*s %-*s -> %s",
TRANSPORT_SUMMARY(_("[up to date]")),
REFCOL_WIDTH, remote, pretty_ref);
return 0;
}
if (current_branch &&
!strcmp(ref->name, current_branch->name) &&
!(update_head_ok || is_bare_repository()) &&
!is_null_sha1(ref->old_sha1)) {
/*
* If this is the head, and it's not okay to update
* the head, and the old value of the head isn't empty...
*/
strbuf_addf(display,
_("! %-*s %-*s -> %s (can't fetch in current branch)"),
TRANSPORT_SUMMARY(_("[rejected]")),
REFCOL_WIDTH, remote, pretty_ref);
return 1;
}
if (!is_null_sha1(ref->old_sha1) &&
starts_with(ref->name, "refs/tags/")) {
int r;
r = s_update_ref("updating tag", ref, 0);
strbuf_addf(display, "%c %-*s %-*s -> %s%s",
r ? '!' : '-',
TRANSPORT_SUMMARY(_("[tag update]")),
REFCOL_WIDTH, remote, pretty_ref,
r ? _(" (unable to update local ref)") : "");
return r;
}
current = lookup_commit_reference_gently(ref->old_sha1, 1);
updated = lookup_commit_reference_gently(ref->new_sha1, 1);
if (!current || !updated) {
const char *msg;
const char *what;
int r;
/*
* Nicely describe the new ref we're fetching.
* Base this on the remote's ref name, as it's
* more likely to follow a standard layout.
*/
const char *name = remote_ref ? remote_ref->name : "";
if (starts_with(name, "refs/tags/")) {
msg = "storing tag";
what = _("[new tag]");
} else if (starts_with(name, "refs/heads/")) {
msg = "storing head";
what = _("[new branch]");
} else {
msg = "storing ref";
what = _("[new ref]");
}
if ((recurse_submodules != RECURSE_SUBMODULES_OFF) &&
(recurse_submodules != RECURSE_SUBMODULES_ON))
check_for_new_submodule_commits(ref->new_sha1);
r = s_update_ref(msg, ref, 0);
strbuf_addf(display, "%c %-*s %-*s -> %s%s",
r ? '!' : '*',
TRANSPORT_SUMMARY(what),
REFCOL_WIDTH, remote, pretty_ref,
r ? _(" (unable to update local ref)") : "");
return r;
}
if (in_merge_bases(current, updated)) {
char quickref[83];
int r;
strcpy(quickref, find_unique_abbrev(current->object.sha1, DEFAULT_ABBREV));
strcat(quickref, "..");
strcat(quickref, find_unique_abbrev(ref->new_sha1, DEFAULT_ABBREV));
fetch/pull: recurse into submodules when necessary To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-07 06:10:46 +08:00
if ((recurse_submodules != RECURSE_SUBMODULES_OFF) &&
(recurse_submodules != RECURSE_SUBMODULES_ON))
check_for_new_submodule_commits(ref->new_sha1);
r = s_update_ref("fast-forward", ref, 1);
strbuf_addf(display, "%c %-*s %-*s -> %s%s",
r ? '!' : ' ',
TRANSPORT_SUMMARY_WIDTH, quickref,
REFCOL_WIDTH, remote, pretty_ref,
r ? _(" (unable to update local ref)") : "");
return r;
} else if (force || ref->force) {
char quickref[84];
int r;
strcpy(quickref, find_unique_abbrev(current->object.sha1, DEFAULT_ABBREV));
strcat(quickref, "...");
strcat(quickref, find_unique_abbrev(ref->new_sha1, DEFAULT_ABBREV));
fetch/pull: recurse into submodules when necessary To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-07 06:10:46 +08:00
if ((recurse_submodules != RECURSE_SUBMODULES_OFF) &&
(recurse_submodules != RECURSE_SUBMODULES_ON))
check_for_new_submodule_commits(ref->new_sha1);
r = s_update_ref("forced-update", ref, 1);
strbuf_addf(display, "%c %-*s %-*s -> %s (%s)",
r ? '!' : '+',
TRANSPORT_SUMMARY_WIDTH, quickref,
REFCOL_WIDTH, remote, pretty_ref,
r ? _("unable to update local ref") : _("forced update"));
return r;
} else {
strbuf_addf(display, "! %-*s %-*s -> %s %s",
TRANSPORT_SUMMARY(_("[rejected]")),
REFCOL_WIDTH, remote, pretty_ref,
_("(non-fast-forward)"));
return 1;
}
}
static int iterate_ref_map(void *cb_data, unsigned char sha1[20])
{
struct ref **rm = cb_data;
struct ref *ref = *rm;
if (!ref)
return -1; /* end of the list */
*rm = ref->next;
hashcpy(sha1, ref->old_sha1);
return 0;
}
static int store_updated_refs(const char *raw_url, const char *remote_name,
struct ref *ref_map)
{
FILE *fp;
struct commit *commit;
int url_len, i, rc = 0;
struct strbuf note = STRBUF_INIT;
const char *what, *kind;
struct ref *rm;
char *url, *filename = dry_run ? "/dev/null" : git_path("FETCH_HEAD");
int want_status;
fp = fopen(filename, "a");
if (!fp)
return error(_("cannot open %s: %s\n"), filename, strerror(errno));
if (raw_url)
url = transport_anonymize_url(raw_url);
else
url = xstrdup("foreign");
rm = ref_map;
if (check_everything_connected(iterate_ref_map, 0, &rm)) {
rc = error(_("%s did not send all necessary objects\n"), url);
goto abort;
}
/*
* We do a pass for each fetch_head_status type in their enum order, so
* merged entries are written before not-for-merge. That lets readers
* use FETCH_HEAD as a refname to refer to the ref to be merged.
*/
for (want_status = FETCH_HEAD_MERGE;
want_status <= FETCH_HEAD_IGNORE;
want_status++) {
for (rm = ref_map; rm; rm = rm->next) {
struct ref *ref = NULL;
const char *merge_status_marker = "";
commit = lookup_commit_reference_gently(rm->old_sha1, 1);
if (!commit)
rm->fetch_head_status = FETCH_HEAD_NOT_FOR_MERGE;
if (rm->fetch_head_status != want_status)
continue;
if (rm->peer_ref) {
ref = xcalloc(1, sizeof(*ref) + strlen(rm->peer_ref->name) + 1);
strcpy(ref->name, rm->peer_ref->name);
hashcpy(ref->old_sha1, rm->peer_ref->old_sha1);
hashcpy(ref->new_sha1, rm->old_sha1);
ref->force = rm->peer_ref->force;
}
if (!strcmp(rm->name, "HEAD")) {
kind = "";
what = "";
}
else if (starts_with(rm->name, "refs/heads/")) {
kind = "branch";
what = rm->name + 11;
}
else if (starts_with(rm->name, "refs/tags/")) {
kind = "tag";
what = rm->name + 10;
}
else if (starts_with(rm->name, "refs/remotes/")) {
kind = "remote-tracking branch";
what = rm->name + 13;
}
else {
kind = "";
what = rm->name;
}
url_len = strlen(url);
for (i = url_len - 1; url[i] == '/' && 0 <= i; i--)
;
url_len = i + 1;
if (4 < i && !strncmp(".git", url + i - 3, 4))
url_len = i - 3;
strbuf_reset(&note);
if (*what) {
if (*kind)
strbuf_addf(&note, "%s ", kind);
strbuf_addf(&note, "'%s' of ", what);
}
switch (rm->fetch_head_status) {
case FETCH_HEAD_NOT_FOR_MERGE:
merge_status_marker = "not-for-merge";
/* fall-through */
case FETCH_HEAD_MERGE:
fprintf(fp, "%s\t%s\t%s",
sha1_to_hex(rm->old_sha1),
merge_status_marker,
note.buf);
for (i = 0; i < url_len; ++i)
if ('\n' == url[i])
fputs("\\n", fp);
else
fputc(url[i], fp);
fputc('\n', fp);
break;
default:
/* do not write anything to FETCH_HEAD */
break;
}
strbuf_reset(&note);
if (ref) {
rc |= update_local_ref(ref, what, rm, &note);
free(ref);
} else
strbuf_addf(&note, "* %-*s %-*s -> FETCH_HEAD",
TRANSPORT_SUMMARY_WIDTH,
*kind ? kind : "branch",
REFCOL_WIDTH,
*what ? what : "HEAD");
if (note.len) {
if (verbosity >= 0 && !shown_url) {
fprintf(stderr, _("From %.*s\n"),
url_len, url);
shown_url = 1;
}
if (verbosity >= 0)
fprintf(stderr, " %s\n", note.buf);
}
}
}
if (rc & STORE_REF_ERROR_DF_CONFLICT)
error(_("some local refs could not be updated; try running\n"
" 'git remote prune %s' to remove any old, conflicting "
"branches"), remote_name);
abort:
strbuf_release(&note);
free(url);
fclose(fp);
return rc;
}
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
/*
* We would want to bypass the object transfer altogether if
* everything we are going to fetch already exists and is connected
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
* locally.
*/
static int quickfetch(struct ref *ref_map)
{
struct ref *rm = ref_map;
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
/*
* If we are deepening a shallow clone we already have these
* objects reachable. Running rev-list here will return with
* a good (0) exit status and we'll bypass the fetch that we
* really need to perform. Claiming failure now will ensure
* we perform the network exchange to deepen our history.
*/
if (depth)
return -1;
return check_everything_connected(iterate_ref_map, 1, &rm);
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
}
static int fetch_refs(struct transport *transport, struct ref *ref_map)
{
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
int ret = quickfetch(ref_map);
if (ret)
ret = transport_fetch_refs(transport, ref_map);
if (!ret)
ret |= store_updated_refs(transport->url,
transport->remote->name,
ref_map);
transport_unlock_pack(transport);
return ret;
}
static int prune_refs(struct refspec *refs, int ref_count, struct ref *ref_map,
const char *raw_url)
{
int url_len, i, result = 0;
struct ref *ref, *stale_refs = get_stale_heads(refs, ref_count, ref_map);
char *url;
const char *dangling_msg = dry_run
? _(" (%s will become dangling)")
: _(" (%s has become dangling)");
if (raw_url)
url = transport_anonymize_url(raw_url);
else
url = xstrdup("foreign");
url_len = strlen(url);
for (i = url_len - 1; url[i] == '/' && 0 <= i; i--)
;
url_len = i + 1;
if (4 < i && !strncmp(".git", url + i - 3, 4))
url_len = i - 3;
for (ref = stale_refs; ref; ref = ref->next) {
if (!dry_run)
result |= delete_ref(ref->name, NULL, 0);
if (verbosity >= 0 && !shown_url) {
fprintf(stderr, _("From %.*s\n"), url_len, url);
shown_url = 1;
}
if (verbosity >= 0) {
fprintf(stderr, " x %-*s %-*s -> %s\n",
TRANSPORT_SUMMARY(_("[deleted]")),
REFCOL_WIDTH, _("(none)"), prettify_refname(ref->name));
warn_dangling_symref(stderr, dangling_msg, ref->name);
}
}
free(url);
free_refs(stale_refs);
return result;
}
static void check_not_current_branch(struct ref *ref_map)
{
struct branch *current_branch = branch_get(NULL);
if (is_bare_repository() || !current_branch)
return;
for (; ref_map; ref_map = ref_map->next)
if (ref_map->peer_ref && !strcmp(current_branch->refname,
ref_map->peer_ref->name))
die(_("Refusing to fetch into current branch %s "
"of non-bare repository"), current_branch->refname);
}
static int truncate_fetch_head(void)
{
char *filename = git_path("FETCH_HEAD");
FILE *fp = fopen(filename, "w");
if (!fp)
return error(_("cannot open %s: %s\n"), filename, strerror(errno));
fclose(fp);
return 0;
}
static void set_option(struct transport *transport, const char *name, const char *value)
{
int r = transport_set_option(transport, name, value);
if (r < 0)
die(_("Option \"%s\" value \"%s\" is not valid for %s"),
name, value, transport->url);
if (r > 0)
warning(_("Option \"%s\" is ignored for %s\n"),
name, transport->url);
}
static struct transport *prepare_transport(struct remote *remote)
{
struct transport *transport;
transport = transport_get(remote, NULL);
transport_set_verbosity(transport, verbosity, progress);
if (upload_pack)
set_option(transport, TRANS_OPT_UPLOADPACK, upload_pack);
if (keep)
set_option(transport, TRANS_OPT_KEEP, "yes");
if (depth)
set_option(transport, TRANS_OPT_DEPTH, depth);
return transport;
}
static void backfill_tags(struct transport *transport, struct ref *ref_map)
{
fetch: work around "transport-take-over" hack A Git-aware "connect" transport allows the "transport_take_over" to redirect generic transport requests like fetch(), push_refs() and get_refs_list() to the native Git transport handling methods. The take-over process replaces transport->data with a fake data that these method implementations understand. While this hack works OK for a single request, it breaks when the transport needs to make more than one requests. transport->data that used to hold necessary information for the specific helper to work correctly is destroyed during the take-over process. One codepath that this matters is "git fetch" in auto-follow mode; when it does not get all the tags that ought to point at the history it got (which can be determined by looking at the peeled tags in the initial advertisement) from the primary transfer, it internally makes a second request to complete the fetch. Because "take-over" hack has already destroyed the data necessary to talk to the transport helper by the time this happens, the second request cannot make a request to the helper to make another connection to fetch these additional tags. Mark such a transport as "cannot_reuse", and use a separate transport to perform the backfill fetch in order to work around this breakage. Note that this problem does not manifest itself when running t5802, because our upload-pack gives you all the necessary auto-followed tags during the primary transfer. You would need to step through "git fetch" in a debugger, stop immediately after the primary transfer finishes and writes these auto-followed tags, remove the tag references and repack/prune the repository to convince the "find-non-local-tags" procedure that the primary transfer failed to give us all the necessary tags, and then let it continue, in order to trigger the bug in the secondary transfer this patch fixes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-08 06:47:18 +08:00
if (transport->cannot_reuse) {
gsecondary = prepare_transport(transport->remote);
transport = gsecondary;
}
transport_set_option(transport, TRANS_OPT_FOLLOWTAGS, NULL);
transport_set_option(transport, TRANS_OPT_DEPTH, "0");
fetch_refs(transport, ref_map);
fetch: work around "transport-take-over" hack A Git-aware "connect" transport allows the "transport_take_over" to redirect generic transport requests like fetch(), push_refs() and get_refs_list() to the native Git transport handling methods. The take-over process replaces transport->data with a fake data that these method implementations understand. While this hack works OK for a single request, it breaks when the transport needs to make more than one requests. transport->data that used to hold necessary information for the specific helper to work correctly is destroyed during the take-over process. One codepath that this matters is "git fetch" in auto-follow mode; when it does not get all the tags that ought to point at the history it got (which can be determined by looking at the peeled tags in the initial advertisement) from the primary transfer, it internally makes a second request to complete the fetch. Because "take-over" hack has already destroyed the data necessary to talk to the transport helper by the time this happens, the second request cannot make a request to the helper to make another connection to fetch these additional tags. Mark such a transport as "cannot_reuse", and use a separate transport to perform the backfill fetch in order to work around this breakage. Note that this problem does not manifest itself when running t5802, because our upload-pack gives you all the necessary auto-followed tags during the primary transfer. You would need to step through "git fetch" in a debugger, stop immediately after the primary transfer finishes and writes these auto-followed tags, remove the tag references and repack/prune the repository to convince the "find-non-local-tags" procedure that the primary transfer failed to give us all the necessary tags, and then let it continue, in order to trigger the bug in the secondary transfer this patch fixes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-08 06:47:18 +08:00
if (gsecondary) {
transport_disconnect(gsecondary);
gsecondary = NULL;
}
}
static int do_fetch(struct transport *transport,
struct refspec *refs, int ref_count)
{
struct string_list existing_refs = STRING_LIST_INIT_DUP;
struct ref *ref_map;
struct ref *rm;
int autotags = (transport->remote->fetch_tags == 1);
int retcode = 0;
for_each_ref(add_existing, &existing_refs);
if (tags == TAGS_DEFAULT) {
if (transport->remote->fetch_tags == 2)
tags = TAGS_SET;
if (transport->remote->fetch_tags == -1)
tags = TAGS_UNSET;
}
if (!transport->get_refs_list || !transport->fetch)
die(_("Don't know how to fetch from %s"), transport->url);
/* if not appending, truncate FETCH_HEAD */
if (!append && !dry_run) {
retcode = truncate_fetch_head();
if (retcode)
goto cleanup;
}
ref_map = get_ref_map(transport, refs, ref_count, tags, &autotags);
if (!update_head_ok)
check_not_current_branch(ref_map);
for (rm = ref_map; rm; rm = rm->next) {
if (rm->peer_ref) {
struct string_list_item *peer_item =
string_list_lookup(&existing_refs,
rm->peer_ref->name);
if (peer_item)
hashcpy(rm->peer_ref->old_sha1,
peer_item->util);
}
}
if (tags == TAGS_DEFAULT && autotags)
transport_set_option(transport, TRANS_OPT_FOLLOWTAGS, "1");
if (fetch_refs(transport, ref_map)) {
free_refs(ref_map);
retcode = 1;
goto cleanup;
}
if (prune) {
fetch --prune: prune only based on explicit refspecs The old behavior of "fetch --prune" was to prune whatever was being fetched. In particular, "fetch --prune --tags" caused tags not only to be fetched, but also to be pruned. This is inappropriate because there is only one tags namespace that is shared among the local repository and all remotes. Therefore, if the user defines a local tag and then runs "git fetch --prune --tags", then the local tag is deleted. Moreover, "--prune" and "--tags" can also be configured via fetch.prune / remote.<name>.prune and remote.<name>.tagopt, making it even less obvious that an invocation of "git fetch" could result in tag lossage. Since the command "git remote update" invokes "git fetch", it had the same problem. The command "git remote prune", on the other hand, disregarded the setting of remote.<name>.tagopt, and so its behavior was inconsistent with that of the other commands. So the old behavior made it too easy to lose tags. To fix this problem, change "fetch --prune" to prune references based only on refspecs specified explicitly by the user, either on the command line or via remote.<name>.fetch. Thus, tags are no longer made subject to pruning by the --tags option or the remote.<name>.tagopt setting. However, tags *are* still subject to pruning if they are fetched as part of a refspec, and that is good. For example: * On the command line, git fetch --prune 'refs/tags/*:refs/tags/*' causes tags, and only tags, to be fetched and pruned, and is therefore a simple way for the user to get the equivalent of the old behavior of "--prune --tag". * For a remote that was configured with the "--mirror" option, the configuration is set to include [remote "name"] fetch = +refs/*:refs/* , which causes tags to be subject to pruning along with all other references. This is the behavior that will typically be desired for a mirror. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-30 13:33:00 +08:00
/*
* We only prune based on refspecs specified
* explicitly (via command line or configuration); we
* don't care whether --tags was specified.
*/
if (ref_count) {
prune_refs(refs, ref_count, ref_map, transport->url);
} else {
fetch --prune: prune only based on explicit refspecs The old behavior of "fetch --prune" was to prune whatever was being fetched. In particular, "fetch --prune --tags" caused tags not only to be fetched, but also to be pruned. This is inappropriate because there is only one tags namespace that is shared among the local repository and all remotes. Therefore, if the user defines a local tag and then runs "git fetch --prune --tags", then the local tag is deleted. Moreover, "--prune" and "--tags" can also be configured via fetch.prune / remote.<name>.prune and remote.<name>.tagopt, making it even less obvious that an invocation of "git fetch" could result in tag lossage. Since the command "git remote update" invokes "git fetch", it had the same problem. The command "git remote prune", on the other hand, disregarded the setting of remote.<name>.tagopt, and so its behavior was inconsistent with that of the other commands. So the old behavior made it too easy to lose tags. To fix this problem, change "fetch --prune" to prune references based only on refspecs specified explicitly by the user, either on the command line or via remote.<name>.fetch. Thus, tags are no longer made subject to pruning by the --tags option or the remote.<name>.tagopt setting. However, tags *are* still subject to pruning if they are fetched as part of a refspec, and that is good. For example: * On the command line, git fetch --prune 'refs/tags/*:refs/tags/*' causes tags, and only tags, to be fetched and pruned, and is therefore a simple way for the user to get the equivalent of the old behavior of "--prune --tag". * For a remote that was configured with the "--mirror" option, the configuration is set to include [remote "name"] fetch = +refs/*:refs/* , which causes tags to be subject to pruning along with all other references. This is the behavior that will typically be desired for a mirror. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-30 13:33:00 +08:00
prune_refs(transport->remote->fetch,
transport->remote->fetch_refspec_nr,
ref_map,
transport->url);
}
}
free_refs(ref_map);
/* if neither --no-tags nor --tags was specified, do automated tag
* following ... */
if (tags == TAGS_DEFAULT && autotags) {
struct ref **tail = &ref_map;
ref_map = NULL;
find_non_local_tags(transport, &ref_map, &tail);
if (ref_map)
backfill_tags(transport, ref_map);
free_refs(ref_map);
}
cleanup:
string_list_clear(&existing_refs, 1);
return retcode;
}
static int get_one_remote_for_fetch(struct remote *remote, void *priv)
{
struct string_list *list = priv;
if (!remote->skip_default_update)
string_list_append(list, remote->name);
return 0;
}
struct remote_group_data {
const char *name;
struct string_list *list;
};
static int get_remote_group(const char *key, const char *value, void *priv)
{
struct remote_group_data *g = priv;
if (starts_with(key, "remotes.") &&
!strcmp(key + 8, g->name)) {
/* split list by white space */
int space = strcspn(value, " \t\n");
while (*value) {
if (space > 1) {
string_list_append(g->list,
xstrndup(value, space));
}
value += space + (value[space] != '\0');
space = strcspn(value, " \t\n");
}
}
return 0;
}
static int add_remote_or_group(const char *name, struct string_list *list)
{
int prev_nr = list->nr;
struct remote_group_data g;
g.name = name; g.list = list;
git_config(get_remote_group, &g);
if (list->nr == prev_nr) {
struct remote *remote;
if (!remote_is_configured(name))
return 0;
remote = remote_get(name);
string_list_append(list, remote->name);
}
return 1;
}
static void add_options_to_argv(struct argv_array *argv)
{
if (dry_run)
argv_array_push(argv, "--dry-run");
if (prune != -1)
argv_array_push(argv, prune ? "--prune" : "--no-prune");
if (update_head_ok)
argv_array_push(argv, "--update-head-ok");
if (force)
argv_array_push(argv, "--force");
if (keep)
argv_array_push(argv, "--keep");
if (recurse_submodules == RECURSE_SUBMODULES_ON)
argv_array_push(argv, "--recurse-submodules");
else if (recurse_submodules == RECURSE_SUBMODULES_ON_DEMAND)
argv_array_push(argv, "--recurse-submodules=on-demand");
if (tags == TAGS_SET)
argv_array_push(argv, "--tags");
else if (tags == TAGS_UNSET)
argv_array_push(argv, "--no-tags");
if (verbosity >= 2)
argv_array_push(argv, "-v");
if (verbosity >= 1)
argv_array_push(argv, "-v");
else if (verbosity < 0)
argv_array_push(argv, "-q");
}
static int fetch_multiple(struct string_list *list)
{
int i, result = 0;
struct argv_array argv = ARGV_ARRAY_INIT;
if (!append && !dry_run) {
int errcode = truncate_fetch_head();
if (errcode)
return errcode;
}
argv_array_pushl(&argv, "fetch", "--append", NULL);
add_options_to_argv(&argv);
for (i = 0; i < list->nr; i++) {
const char *name = list->items[i].string;
argv_array_push(&argv, name);
if (verbosity >= 0)
printf(_("Fetching %s\n"), name);
if (run_command_v_opt(argv.argv, RUN_GIT_CMD)) {
error(_("Could not fetch %s"), name);
result = 1;
}
argv_array_pop(&argv);
}
argv_array_clear(&argv);
return result;
}
static int fetch_one(struct remote *remote, int argc, const char **argv)
{
int i;
static const char **refs = NULL;
struct refspec *refspec;
int ref_nr = 0;
int exit_code;
if (!remote)
die(_("No remote repository specified. Please, specify either a URL or a\n"
"remote name from which new revisions should be fetched."));
gtransport = prepare_transport(remote);
if (prune < 0) {
/* no command line request */
if (0 <= gtransport->remote->prune)
prune = gtransport->remote->prune;
else if (0 <= fetch_prune_config)
prune = fetch_prune_config;
else
prune = PRUNE_BY_DEFAULT;
}
if (argc > 0) {
int j = 0;
refs = xcalloc(argc + 1, sizeof(const char *));
for (i = 0; i < argc; i++) {
if (!strcmp(argv[i], "tag")) {
char *ref;
i++;
if (i >= argc)
die(_("You need to specify a tag name."));
ref = xmalloc(strlen(argv[i]) * 2 + 22);
strcpy(ref, "refs/tags/");
strcat(ref, argv[i]);
strcat(ref, ":refs/tags/");
strcat(ref, argv[i]);
refs[j++] = ref;
} else
refs[j++] = argv[i];
}
refs[j] = NULL;
ref_nr = j;
}
sigchain_push_common(unlock_pack_on_signal);
atexit(unlock_pack);
refspec = parse_fetch_refspec(ref_nr, refs);
exit_code = do_fetch(gtransport, refspec, ref_nr);
free_refspec(ref_nr, refspec);
transport_disconnect(gtransport);
gtransport = NULL;
return exit_code;
}
int cmd_fetch(int argc, const char **argv, const char *prefix)
{
int i;
struct string_list list = STRING_LIST_INIT_NODUP;
struct remote *remote;
int result = 0;
static const char *argv_gc_auto[] = {
"gc", "--auto", NULL,
};
packet_trace_identity("fetch");
/* Record the command line for the reflog */
strbuf_addstr(&default_rla, "fetch");
for (i = 1; i < argc; i++)
strbuf_addf(&default_rla, " %s", argv[i]);
git_config(git_fetch_config, NULL);
argc = parse_options(argc, argv, prefix,
builtin_fetch_options, builtin_fetch_usage, 0);
if (unshallow) {
if (depth)
die(_("--depth and --unshallow cannot be used together"));
else if (!is_repository_shallow())
die(_("--unshallow on a complete repository does not make sense"));
else {
static char inf_depth[12];
sprintf(inf_depth, "%d", INFINITE_DEPTH);
depth = inf_depth;
}
}
/* no need to be strict, transport_set_option() will validate it again */
if (depth && atoi(depth) < 1)
die(_("depth %s is not a positive number"), depth);
if (recurse_submodules != RECURSE_SUBMODULES_OFF) {
if (recurse_submodules_default) {
int arg = parse_fetch_recurse_submodules_arg("--recurse-submodules-default", recurse_submodules_default);
set_config_fetch_recurse_submodules(arg);
}
gitmodules_config();
git_config(submodule_config, NULL);
}
if (all) {
if (argc == 1)
die(_("fetch --all does not take a repository argument"));
else if (argc > 1)
die(_("fetch --all does not make sense with refspecs"));
(void) for_each_remote(get_one_remote_for_fetch, &list);
result = fetch_multiple(&list);
} else if (argc == 0) {
/* No arguments -- use default remote */
remote = remote_get(NULL);
result = fetch_one(remote, argc, argv);
} else if (multiple) {
/* All arguments are assumed to be remotes or groups */
for (i = 0; i < argc; i++)
if (!add_remote_or_group(argv[i], &list))
die(_("No such remote or remote group: %s"), argv[i]);
result = fetch_multiple(&list);
} else {
/* Single remote or group */
(void) add_remote_or_group(argv[0], &list);
if (list.nr > 1) {
/* More than one remote */
if (argc > 1)
die(_("Fetching a group and specifying refspecs does not make sense"));
result = fetch_multiple(&list);
} else {
/* Zero or one remotes */
remote = remote_get(argv[0]);
result = fetch_one(remote, argc-1, argv+1);
}
}
if (!result && (recurse_submodules != RECURSE_SUBMODULES_OFF)) {
struct argv_array options = ARGV_ARRAY_INIT;
add_options_to_argv(&options);
result = fetch_populated_submodules(&options,
submodule_prefix,
recurse_submodules,
verbosity < 0);
argv_array_clear(&options);
}
/* All names were strdup()ed or strndup()ed */
list.strdup_strings = 1;
string_list_clear(&list, 0);
run_command_v_opt(argv_gc_auto, RUN_GIT_CMD);
return result;
}