Implement line-history search (git log -L)
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29 00:47:32 +08:00
|
|
|
#ifndef LINE_LOG_H
|
|
|
|
|
#define LINE_LOG_H
|
|
|
|
|
|
|
|
|
|
#include "diffcore.h"
|
|
|
|
|
|
|
|
|
|
struct rev_info;
|
|
|
|
|
struct commit;
|
|
|
|
|
|
|
|
|
|
/* A range [start,end]. Lines are numbered starting at 0, and the
|
|
|
|
|
* ranges include start but exclude end. */
|
|
|
|
|
struct range {
|
|
|
|
|
long start, end;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* A set of ranges. The ranges must always be disjoint and sorted. */
|
|
|
|
|
struct range_set {
|
2017-09-22 00:49:38 +08:00
|
|
|
unsigned int alloc, nr;
|
Implement line-history search (git log -L)
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29 00:47:32 +08:00
|
|
|
struct range *ranges;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* A diff, encoded as the set of pre- and post-image ranges where the
|
|
|
|
|
* files differ. A pair of ranges corresponds to a hunk. */
|
|
|
|
|
struct diff_ranges {
|
|
|
|
|
struct range_set parent;
|
|
|
|
|
struct range_set target;
|
|
|
|
|
};
|
|
|
|
|
|
2019-04-29 16:28:14 +08:00
|
|
|
void range_set_init(struct range_set *, size_t prealloc);
|
|
|
|
|
void range_set_release(struct range_set *);
|
2013-08-06 21:59:36 +08:00
|
|
|
/* Range includes start; excludes end */
|
2019-04-29 16:28:14 +08:00
|
|
|
void range_set_append_unsafe(struct range_set *, long start, long end);
|
2013-08-06 21:59:36 +08:00
|
|
|
/* New range must begin at or after end of last added range */
|
2019-04-29 16:28:14 +08:00
|
|
|
void range_set_append(struct range_set *, long start, long end);
|
2013-08-06 21:59:36 +08:00
|
|
|
/*
|
|
|
|
|
* In-place pass of sorting and merging the ranges in the range set,
|
|
|
|
|
* to sort and make the ranges disjoint.
|
|
|
|
|
*/
|
2019-04-29 16:28:14 +08:00
|
|
|
void sort_and_merge_range_set(struct range_set *);
|
2013-08-06 21:59:36 +08:00
|
|
|
|
Implement line-history search (git log -L)
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29 00:47:32 +08:00
|
|
|
/* Linked list of interesting files and their associated ranges. The
|
log -L: store the path instead of a diff_filespec
line_log_data has held a diff_filespec* since the very early versions
of the code. However, the only place in the code where we actually
need the full filespec is parse_range_arg(); in all other cases, we
are only interested in the path, so there is hardly a reason to store
a filespec. Even worse, it causes a lot of redundant ->spec->path
pointer dereferencing.
And *even* worse, it caused the following bug. If you merge a rename
with a modification to the old filename, like so:
* Merge
| \
| * Modify foo
| |
* | Rename foo->bar
| /
* Create foo
we internally -- in process_ranges_merge_commit() -- scan all parents.
We are mainly looking for one that doesn't have any modifications, so
that we can assign all the blame to it and simplify away the merge.
In doing so, we run the normal machinery on all parents in a loop.
For each parent, we prepare a "working set" line_log_data by making a
copy with line_log_data_copy(), which does *not* make a copy of the
spec.
Now suppose the rename is the first parent. The diff machinery tells
us that the filepair is ('foo', 'bar'). We duly update the path we
are interested in:
rg->spec->path = xstrdup(pair->one->path);
But that 'struct spec' is shared between the output line_log_data and
the original input line_log_data. So we just wrecked the state of
process_ranges_merge_commit(). When we get around to the second
parent, the ranges tell us we are interested in a file 'foo' while the
commits touch 'bar'.
So most of this patch is just s/->spec->path/->path/ and associated
management changes. This implicitly fixes the bug because we removed
the shared parts between input and output of line_log_data_copy(); it
is now safe to overwrite the path in the copy.
There's one only somewhat related change: the comment in
process_all_files() explains the reasoning behind using 'range' there.
That bit of half-correct code had me sidetracked for a while.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-13 00:05:11 +08:00
|
|
|
* list must be kept sorted by path.
|
|
|
|
|
*
|
|
|
|
|
* For simplicity, even though this is highly redundant, each
|
|
|
|
|
* line_log_data owns its 'path'.
|
|
|
|
|
*/
|
Implement line-history search (git log -L)
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29 00:47:32 +08:00
|
|
|
struct line_log_data {
|
|
|
|
|
struct line_log_data *next;
|
log -L: store the path instead of a diff_filespec
line_log_data has held a diff_filespec* since the very early versions
of the code. However, the only place in the code where we actually
need the full filespec is parse_range_arg(); in all other cases, we
are only interested in the path, so there is hardly a reason to store
a filespec. Even worse, it causes a lot of redundant ->spec->path
pointer dereferencing.
And *even* worse, it caused the following bug. If you merge a rename
with a modification to the old filename, like so:
* Merge
| \
| * Modify foo
| |
* | Rename foo->bar
| /
* Create foo
we internally -- in process_ranges_merge_commit() -- scan all parents.
We are mainly looking for one that doesn't have any modifications, so
that we can assign all the blame to it and simplify away the merge.
In doing so, we run the normal machinery on all parents in a loop.
For each parent, we prepare a "working set" line_log_data by making a
copy with line_log_data_copy(), which does *not* make a copy of the
spec.
Now suppose the rename is the first parent. The diff machinery tells
us that the filepair is ('foo', 'bar'). We duly update the path we
are interested in:
rg->spec->path = xstrdup(pair->one->path);
But that 'struct spec' is shared between the output line_log_data and
the original input line_log_data. So we just wrecked the state of
process_ranges_merge_commit(). When we get around to the second
parent, the ranges tell us we are interested in a file 'foo' while the
commits touch 'bar'.
So most of this patch is just s/->spec->path/->path/ and associated
management changes. This implicitly fixes the bug because we removed
the shared parts between input and output of line_log_data_copy(); it
is now safe to overwrite the path in the copy.
There's one only somewhat related change: the comment in
process_all_files() explains the reasoning behind using 'range' there.
That bit of half-correct code had me sidetracked for a while.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-13 00:05:11 +08:00
|
|
|
char *path;
|
Implement line-history search (git log -L)
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29 00:47:32 +08:00
|
|
|
struct range_set ranges;
|
|
|
|
|
struct diff_filepair *pair;
|
|
|
|
|
struct diff_ranges diff;
|
|
|
|
|
};
|
|
|
|
|
|
2019-04-29 16:28:14 +08:00
|
|
|
void line_log_init(struct rev_info *rev, const char *prefix, struct string_list *args);
|
Implement line-history search (git log -L)
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29 00:47:32 +08:00
|
|
|
|
2019-04-29 16:28:14 +08:00
|
|
|
int line_log_filter(struct rev_info *rev);
|
Implement line-history search (git log -L)
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29 00:47:32 +08:00
|
|
|
|
2019-04-29 16:28:14 +08:00
|
|
|
int line_log_print(struct rev_info *rev, struct commit *commit);
|
Implement line-history search (git log -L)
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29 00:47:32 +08:00
|
|
|
|
|
|
|
|
#endif /* LINE_LOG_H */
|
