git/builtin/fetch.c

941 lines
24 KiB
C
Raw Normal View History

/*
* "git fetch"
*/
#include "cache.h"
#include "refs.h"
#include "commit.h"
#include "builtin.h"
#include "string-list.h"
#include "remote.h"
#include "transport.h"
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
#include "run-command.h"
#include "parse-options.h"
#include "sigchain.h"
#include "transport.h"
static const char * const builtin_fetch_usage[] = {
"git fetch [<options>] [<repository> [<refspec>...]]",
"git fetch [<options>] <group>",
"git fetch --multiple [<options>] [<repository> | <group>]...",
"git fetch --all [<options>]",
NULL
};
enum {
TAGS_UNSET = 0,
TAGS_DEFAULT = 1,
TAGS_SET = 2
};
static int all, append, dry_run, force, keep, multiple, prune, update_head_ok, verbosity;
static int progress;
static int tags = TAGS_DEFAULT;
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
static const char *depth;
static const char *upload_pack;
static struct strbuf default_rla = STRBUF_INIT;
static struct transport *transport;
static struct option builtin_fetch_options[] = {
OPT__VERBOSITY(&verbosity),
OPT_BOOLEAN(0, "all", &all,
"fetch from all remotes"),
OPT_BOOLEAN('a', "append", &append,
"append to .git/FETCH_HEAD instead of overwriting"),
OPT_STRING(0, "upload-pack", &upload_pack, "PATH",
"path to upload pack on remote end"),
OPT_BOOLEAN('f', "force", &force,
"force overwrite of local branch"),
OPT_BOOLEAN('m', "multiple", &multiple,
"fetch from multiple remotes"),
OPT_SET_INT('t', "tags", &tags,
"fetch all tags and associated objects", TAGS_SET),
OPT_SET_INT('n', NULL, &tags,
"do not fetch all tags (--no-tags)", TAGS_UNSET),
OPT_BOOLEAN('p', "prune", &prune,
"prune tracking branches no longer on remote"),
OPT_BOOLEAN(0, "dry-run", &dry_run,
"dry run"),
OPT_BOOLEAN('k', "keep", &keep, "keep downloaded pack"),
OPT_BOOLEAN('u', "update-head-ok", &update_head_ok,
"allow updating of HEAD ref"),
OPT_BOOLEAN(0, "progress", &progress, "force progress reporting"),
OPT_STRING(0, "depth", &depth, "DEPTH",
"deepen history of shallow clone"),
OPT_END()
};
static void unlock_pack(void)
{
if (transport)
transport_unlock_pack(transport);
}
static void unlock_pack_on_signal(int signo)
{
unlock_pack();
sigchain_pop(signo);
raise(signo);
}
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
static void add_merge_config(struct ref **head,
const struct ref *remote_refs,
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
struct branch *branch,
struct ref ***tail)
{
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
int i;
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
for (i = 0; i < branch->merge_nr; i++) {
struct ref *rm, **old_tail = *tail;
struct refspec refspec;
for (rm = *head; rm; rm = rm->next) {
if (branch_merge_matches(branch, i, rm->name)) {
rm->merge = 1;
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
break;
}
}
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
if (rm)
continue;
/*
* Not fetched to a tracking branch? We need to fetch
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
* it anyway to allow this branch's "branch.$name.merge"
* to be honored by 'git pull', but we do not have to
* fail if branch.$name.merge is misconfigured to point
* at a nonexisting branch. If we were indeed called by
* 'git pull', it will notice the misconfiguration because
* there is no entry in the resulting FETCH_HEAD marked
* for merging.
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
*/
memset(&refspec, 0, sizeof(refspec));
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
refspec.src = branch->merge[i]->src;
get_fetch_map(remote_refs, &refspec, tail, 1);
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
for (rm = *old_tail; rm; rm = rm->next)
rm->merge = 1;
}
}
static void find_non_local_tags(struct transport *transport,
struct ref **head,
struct ref ***tail);
static struct ref *get_ref_map(struct transport *transport,
struct refspec *refs, int ref_count, int tags,
int *autotags)
{
int i;
struct ref *rm;
struct ref *ref_map = NULL;
struct ref **tail = &ref_map;
const struct ref *remote_refs = transport_get_remote_refs(transport);
if (ref_count || tags == TAGS_SET) {
for (i = 0; i < ref_count; i++) {
get_fetch_map(remote_refs, &refs[i], &tail, 0);
if (refs[i].dst && refs[i].dst[0])
*autotags = 1;
}
/* Merge everything on the command line, but not --tags */
for (rm = ref_map; rm; rm = rm->next)
rm->merge = 1;
if (tags == TAGS_SET)
get_fetch_map(remote_refs, tag_refspec, &tail, 0);
} else {
/* Use the defaults */
struct remote *remote = transport->remote;
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
struct branch *branch = branch_get(NULL);
int has_merge = branch_has_merge_config(branch);
if (remote && (remote->fetch_refspec_nr || has_merge)) {
for (i = 0; i < remote->fetch_refspec_nr; i++) {
get_fetch_map(remote_refs, &remote->fetch[i], &tail, 0);
if (remote->fetch[i].dst &&
remote->fetch[i].dst[0])
*autotags = 1;
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
if (!i && !has_merge && ref_map &&
!remote->fetch[0].pattern)
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
ref_map->merge = 1;
}
/*
* if the remote we're fetching from is the same
* as given in branch.<name>.remote, we add the
* ref given in branch.<name>.merge, too.
*/
if (has_merge &&
!strcmp(branch->remote_name, remote->name))
Correct handling of branch.$name.merge in builtin-fetch My prior bug fix for git-push titled "Don't configure remote "." to fetch everything to itself" actually broke t5520 as we were unable to evaluate a branch configuration of: [branch "copy"] remote = . merge = refs/heads/master as remote "." did not have a "remote...fetch" configuration entry to offer up refs/heads/master as a possible candidate available to be fetched and merged. In shell script git-fetch and prior to the above mentioned commit this was hardcoded for a url of "." to be the set of local branches. Chasing down this bug led me to the conclusion that our prior behavior with regards to branch.$name.merge was incorrect. In the shell script based git-fetch implementation we only fetched and merged a branch if it appeared both in branch.$name.merge *and* in remote.$r.fetch, where $r = branch.$name.remote. In other words in the following config file: [remote "origin"] url = git://git.kernel.org/pub/scm/git/git.git fetch = refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master [branch "pu"] remote = origin merge = refs/heads/pu Attempting to run `git pull` while on branch "pu" would always give the user "Already up-to-date" as git-fetch did not fetch pu and thus did not mark it for merge in .git/FETCH_HEAD. The configured merge would always be ignored and the user would be left scratching her confused head wondering why merge did not work on "pu" but worked fine on "master". If we are using the "default fetch" specification for the current branch and the current branch has a branch.$name.merge configured we now union it with the list of refs in remote.$r.fetch. This way the above configuration does what the user expects it to do, which is to fetch only "master" by default but when on "pu" to fetch both "master" and "pu". This uncovered some breakage in the test suite where old-style Cogito branches (.git/branches/$r) did not fetch the branches listed in .git/config for merging and thus did not actually merge them if the user tried to use `git pull` on that branch. Junio and I discussed it on list and felt that the union approach here makes more sense to DWIM for the end-user than silently ignoring their configured request so the test vectors for t5515 have been updated to include for-merge lines in .git/FETCH_HEAD where they have been configured for-merge in .git/config. Since we are now performing a union of the fetch specification and the merge specification and we cannot allow a branch to be listed twice (otherwise it comes out twice in .git/FETCH_HEAD) we need to perform a double loop here over all of the branch.$name.merge lines and try to set their merge flag if we have already schedule that branch for fetching by remote.$r.fetch. If no match is found then we must add new specifications to fetch the branch but not store it as no local tracking branch has been designated. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18 16:54:53 +08:00
add_merge_config(&ref_map, remote_refs, branch, &tail);
} else {
ref_map = get_remote_ref(remote_refs, "HEAD");
if (!ref_map)
die("Couldn't find remote ref HEAD");
ref_map->merge = 1;
tail = &ref_map->next;
}
}
if (tags == TAGS_DEFAULT && *autotags)
find_non_local_tags(transport, &ref_map, &tail);
ref_remove_duplicates(ref_map);
return ref_map;
}
#define STORE_REF_ERROR_OTHER 1
#define STORE_REF_ERROR_DF_CONFLICT 2
static int s_update_ref(const char *action,
struct ref *ref,
int check_old)
{
char msg[1024];
char *rla = getenv("GIT_REFLOG_ACTION");
static struct ref_lock *lock;
if (dry_run)
return 0;
if (!rla)
rla = default_rla.buf;
snprintf(msg, sizeof(msg), "%s: %s", rla, action);
lock = lock_any_ref_for_update(ref->name,
check_old ? ref->old_sha1 : NULL, 0);
if (!lock)
return errno == ENOTDIR ? STORE_REF_ERROR_DF_CONFLICT :
STORE_REF_ERROR_OTHER;
if (write_ref_sha1(lock, ref->new_sha1, msg) < 0)
return errno == ENOTDIR ? STORE_REF_ERROR_DF_CONFLICT :
STORE_REF_ERROR_OTHER;
return 0;
}
#define REFCOL_WIDTH 10
static int update_local_ref(struct ref *ref,
const char *remote,
char *display)
{
struct commit *current = NULL, *updated;
enum object_type type;
struct branch *current_branch = branch_get(NULL);
const char *pretty_ref = prettify_refname(ref->name);
*display = 0;
type = sha1_object_info(ref->new_sha1, NULL);
if (type < 0)
die("object %s not found", sha1_to_hex(ref->new_sha1));
if (!hashcmp(ref->old_sha1, ref->new_sha1)) {
if (verbosity > 0)
sprintf(display, "= %-*s %-*s -> %s", TRANSPORT_SUMMARY_WIDTH,
"[up to date]", REFCOL_WIDTH, remote,
pretty_ref);
return 0;
}
if (current_branch &&
!strcmp(ref->name, current_branch->name) &&
!(update_head_ok || is_bare_repository()) &&
!is_null_sha1(ref->old_sha1)) {
/*
* If this is the head, and it's not okay to update
* the head, and the old value of the head isn't empty...
*/
sprintf(display, "! %-*s %-*s -> %s (can't fetch in current branch)",
TRANSPORT_SUMMARY_WIDTH, "[rejected]", REFCOL_WIDTH, remote,
pretty_ref);
return 1;
}
if (!is_null_sha1(ref->old_sha1) &&
!prefixcmp(ref->name, "refs/tags/")) {
int r;
r = s_update_ref("updating tag", ref, 0);
sprintf(display, "%c %-*s %-*s -> %s%s", r ? '!' : '-',
TRANSPORT_SUMMARY_WIDTH, "[tag update]", REFCOL_WIDTH, remote,
pretty_ref, r ? " (unable to update local ref)" : "");
return r;
}
current = lookup_commit_reference_gently(ref->old_sha1, 1);
updated = lookup_commit_reference_gently(ref->new_sha1, 1);
if (!current || !updated) {
const char *msg;
const char *what;
int r;
if (!strncmp(ref->name, "refs/tags/", 10)) {
msg = "storing tag";
what = "[new tag]";
}
else {
msg = "storing head";
what = "[new branch]";
}
r = s_update_ref(msg, ref, 0);
sprintf(display, "%c %-*s %-*s -> %s%s", r ? '!' : '*',
TRANSPORT_SUMMARY_WIDTH, what, REFCOL_WIDTH, remote, pretty_ref,
r ? " (unable to update local ref)" : "");
return r;
}
if (in_merge_bases(current, &updated, 1)) {
char quickref[83];
int r;
strcpy(quickref, find_unique_abbrev(current->object.sha1, DEFAULT_ABBREV));
strcat(quickref, "..");
strcat(quickref, find_unique_abbrev(ref->new_sha1, DEFAULT_ABBREV));
r = s_update_ref("fast-forward", ref, 1);
sprintf(display, "%c %-*s %-*s -> %s%s", r ? '!' : ' ',
TRANSPORT_SUMMARY_WIDTH, quickref, REFCOL_WIDTH, remote,
pretty_ref, r ? " (unable to update local ref)" : "");
return r;
} else if (force || ref->force) {
char quickref[84];
int r;
strcpy(quickref, find_unique_abbrev(current->object.sha1, DEFAULT_ABBREV));
strcat(quickref, "...");
strcat(quickref, find_unique_abbrev(ref->new_sha1, DEFAULT_ABBREV));
r = s_update_ref("forced-update", ref, 1);
sprintf(display, "%c %-*s %-*s -> %s (%s)", r ? '!' : '+',
TRANSPORT_SUMMARY_WIDTH, quickref, REFCOL_WIDTH, remote,
pretty_ref,
r ? "unable to update local ref" : "forced update");
return r;
} else {
sprintf(display, "! %-*s %-*s -> %s (non-fast-forward)",
TRANSPORT_SUMMARY_WIDTH, "[rejected]", REFCOL_WIDTH, remote,
pretty_ref);
return 1;
}
}
static int store_updated_refs(const char *raw_url, const char *remote_name,
struct ref *ref_map)
{
FILE *fp;
struct commit *commit;
int url_len, i, note_len, shown_url = 0, rc = 0;
char note[1024];
const char *what, *kind;
struct ref *rm;
char *url, *filename = dry_run ? "/dev/null" : git_path("FETCH_HEAD");
fp = fopen(filename, "a");
if (!fp)
return error("cannot open %s: %s\n", filename, strerror(errno));
if (raw_url)
url = transport_anonymize_url(raw_url);
else
url = xstrdup("foreign");
for (rm = ref_map; rm; rm = rm->next) {
struct ref *ref = NULL;
if (rm->peer_ref) {
ref = xcalloc(1, sizeof(*ref) + strlen(rm->peer_ref->name) + 1);
strcpy(ref->name, rm->peer_ref->name);
hashcpy(ref->old_sha1, rm->peer_ref->old_sha1);
hashcpy(ref->new_sha1, rm->old_sha1);
ref->force = rm->peer_ref->force;
}
commit = lookup_commit_reference_gently(rm->old_sha1, 1);
if (!commit)
rm->merge = 0;
if (!strcmp(rm->name, "HEAD")) {
kind = "";
what = "";
}
else if (!prefixcmp(rm->name, "refs/heads/")) {
kind = "branch";
what = rm->name + 11;
}
else if (!prefixcmp(rm->name, "refs/tags/")) {
kind = "tag";
what = rm->name + 10;
}
else if (!prefixcmp(rm->name, "refs/remotes/")) {
kind = "remote branch";
what = rm->name + 13;
}
else {
kind = "";
what = rm->name;
}
url_len = strlen(url);
for (i = url_len - 1; url[i] == '/' && 0 <= i; i--)
;
url_len = i + 1;
if (4 < i && !strncmp(".git", url + i - 3, 4))
url_len = i - 3;
note_len = 0;
if (*what) {
if (*kind)
note_len += sprintf(note + note_len, "%s ",
kind);
note_len += sprintf(note + note_len, "'%s' of ", what);
}
note[note_len] = '\0';
fprintf(fp, "%s\t%s\t%s",
sha1_to_hex(commit ? commit->object.sha1 :
rm->old_sha1),
rm->merge ? "" : "not-for-merge",
note);
for (i = 0; i < url_len; ++i)
if ('\n' == url[i])
fputs("\\n", fp);
else
fputc(url[i], fp);
fputc('\n', fp);
if (ref) {
rc |= update_local_ref(ref, what, note);
free(ref);
} else
sprintf(note, "* %-*s %-*s -> FETCH_HEAD",
TRANSPORT_SUMMARY_WIDTH, *kind ? kind : "branch",
REFCOL_WIDTH, *what ? what : "HEAD");
if (*note) {
if (verbosity >= 0 && !shown_url) {
fprintf(stderr, "From %.*s\n",
url_len, url);
shown_url = 1;
}
if (verbosity >= 0)
fprintf(stderr, " %s\n", note);
}
}
free(url);
fclose(fp);
if (rc & STORE_REF_ERROR_DF_CONFLICT)
error("some local refs could not be updated; try running\n"
" 'git remote prune %s' to remove any old, conflicting "
"branches", remote_name);
return rc;
}
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
/*
* We would want to bypass the object transfer altogether if
* everything we are going to fetch already exists and is connected
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
* locally.
*
* The refs we are going to fetch are in ref_map. If running
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
*
* $ git rev-list --objects --stdin --not --all
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
*
* (feeding all the refs in ref_map on its standard input)
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
* does not error out, that means everything reachable from the
* refs we are going to fetch exists and is connected to some of
* our existing refs.
*/
static int quickfetch(struct ref *ref_map)
{
struct child_process revlist;
struct ref *ref;
int err;
const char *argv[] = {"rev-list",
"--quiet", "--objects", "--stdin", "--not", "--all", NULL};
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
/*
* If we are deepening a shallow clone we already have these
* objects reachable. Running rev-list here will return with
* a good (0) exit status and we'll bypass the fetch that we
* really need to perform. Claiming failure now will ensure
* we perform the network exchange to deepen our history.
*/
if (depth)
return -1;
if (!ref_map)
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
return 0;
memset(&revlist, 0, sizeof(revlist));
revlist.argv = argv;
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
revlist.git_cmd = 1;
revlist.no_stdout = 1;
revlist.no_stderr = 1;
revlist.in = -1;
err = start_command(&revlist);
if (err) {
error("could not run rev-list");
return err;
}
/*
* If rev-list --stdin encounters an unknown commit, it terminates,
* which will cause SIGPIPE in the write loop below.
*/
sigchain_push(SIGPIPE, SIG_IGN);
for (ref = ref_map; ref; ref = ref->next) {
if (write_in_full(revlist.in, sha1_to_hex(ref->old_sha1), 40) < 0 ||
write_str_in_full(revlist.in, "\n") < 0) {
if (errno != EPIPE && errno != EINVAL)
error("failed write to rev-list: %s", strerror(errno));
err = -1;
break;
}
}
if (close(revlist.in)) {
error("failed to close rev-list's stdin: %s", strerror(errno));
err = -1;
}
sigchain_pop(SIGPIPE);
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
return finish_command(&revlist) || err;
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
}
static int fetch_refs(struct transport *transport, struct ref *ref_map)
{
git-fetch: avoid local fetching from alternate (again) Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught git-fetch to avoid copying objects when we are fetching from a repository that is already registered as an alternate object database. In such a case there is no reason to copy any objects as we can already obtain them through the alternate. However we need to ensure the objects are all reachable, so we run `git rev-list --objects $theirs --not --all` to verify this. If any object is missing or unreadable then we need to fetch/copy the objects from the remote. When a missing object is detected the git-rev-list process will exit with a non-zero exit status, making this condition quite easy to detect. Although git-fetch is currently a builtin (and so is rev-list) we cannot invoke the traverse_objects() API at this point in the transport code. The object walker within traverse_objects() calls die() as soon as it finds an object it cannot read. If that happens we want to resume the fetch process by calling do_fetch_pack(). To get around this we spawn git-rev-list into a background process to prevent a die() from killing the foreground fetch process, thus allowing the fetch process to resume into do_fetch_pack() if copying is necessary. We aren't interested in the output of rev-list (a list of SHA-1 object names that are reachable) or its errors (a "spurious" error about an object not being found as we need to copy it) so we redirect both stdout and stderr to /dev/null. We run this git-rev-list based check before any fetch as we may already have the necessary objects local from a prior fetch. If we don't then its very likely the first $theirs object listed on the command line won't exist locally and git-rev-list will die very quickly, allowing us to start the network transfer. This test even on remote URLs may save bandwidth if someone runs `git pull origin`, sees a merge conflict, resets out, then redoes the same pull just a short time later. If the remote hasn't changed between the two pulls and the local repository hasn't had git-gc run in it then there is probably no need to perform network transfer as all of the objects are local. Documentation for the new quickfetch function was suggested and written by Junio, based on his original comment in git-fetch.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-11-11 15:29:47 +08:00
int ret = quickfetch(ref_map);
if (ret)
ret = transport_fetch_refs(transport, ref_map);
if (!ret)
ret |= store_updated_refs(transport->url,
transport->remote->name,
ref_map);
transport_unlock_pack(transport);
return ret;
}
static int prune_refs(struct transport *transport, struct ref *ref_map)
{
int result = 0;
struct ref *ref, *stale_refs = get_stale_heads(transport->remote, ref_map);
const char *dangling_msg = dry_run
? " (%s will become dangling)\n"
: " (%s has become dangling)\n";
for (ref = stale_refs; ref; ref = ref->next) {
if (!dry_run)
result |= delete_ref(ref->name, NULL, 0);
if (verbosity >= 0) {
fprintf(stderr, " x %-*s %-*s -> %s\n",
TRANSPORT_SUMMARY_WIDTH, "[deleted]",
REFCOL_WIDTH, "(none)", prettify_refname(ref->name));
warn_dangling_symref(stderr, dangling_msg, ref->name);
}
}
free_refs(stale_refs);
return result;
}
static int add_existing(const char *refname, const unsigned char *sha1,
int flag, void *cbdata)
{
struct string_list *list = (struct string_list *)cbdata;
struct string_list_item *item = string_list_insert(refname, list);
item->util = (void *)sha1;
return 0;
}
static int will_fetch(struct ref **head, const unsigned char *sha1)
{
struct ref *rm = *head;
while (rm) {
if (!hashcmp(rm->old_sha1, sha1))
return 1;
rm = rm->next;
}
return 0;
}
struct tag_data {
struct ref **head;
struct ref ***tail;
};
static int add_to_tail(struct string_list_item *item, void *cb_data)
{
struct tag_data *data = (struct tag_data *)cb_data;
struct ref *rm = NULL;
/* We have already decided to ignore this item */
if (!item->util)
return 0;
rm = alloc_ref(item->string);
rm->peer_ref = alloc_ref(item->string);
hashcpy(rm->old_sha1, item->util);
**data->tail = rm;
*data->tail = &rm->next;
return 0;
}
static void find_non_local_tags(struct transport *transport,
struct ref **head,
struct ref ***tail)
{
struct string_list existing_refs = { NULL, 0, 0, 0 };
struct string_list remote_refs = { NULL, 0, 0, 0 };
struct tag_data data = {head, tail};
const struct ref *ref;
struct string_list_item *item = NULL;
for_each_ref(add_existing, &existing_refs);
for (ref = transport_get_remote_refs(transport); ref; ref = ref->next) {
if (prefixcmp(ref->name, "refs/tags"))
continue;
/*
* The peeled ref always follows the matching base
* ref, so if we see a peeled ref that we don't want
* to fetch then we can mark the ref entry in the list
* as one to ignore by setting util to NULL.
*/
if (!suffixcmp(ref->name, "^{}")) {
if (item && !has_sha1_file(ref->old_sha1) &&
!will_fetch(head, ref->old_sha1) &&
!has_sha1_file(item->util) &&
!will_fetch(head, item->util))
item->util = NULL;
item = NULL;
continue;
}
/*
* If item is non-NULL here, then we previously saw a
* ref not followed by a peeled reference, so we need
* to check if it is a lightweight tag that we want to
* fetch.
*/
if (item && !has_sha1_file(item->util) &&
!will_fetch(head, item->util))
item->util = NULL;
item = NULL;
/* skip duplicates and refs that we already have */
if (string_list_has_string(&remote_refs, ref->name) ||
string_list_has_string(&existing_refs, ref->name))
continue;
item = string_list_insert(ref->name, &remote_refs);
item->util = (void *)ref->old_sha1;
}
string_list_clear(&existing_refs, 0);
/*
* We may have a final lightweight tag that needs to be
* checked to see if it needs fetching.
*/
if (item && !has_sha1_file(item->util) &&
!will_fetch(head, item->util))
item->util = NULL;
/*
* For all the tags in the remote_refs string list, call
* add_to_tail to add them to the list of refs to be fetched
*/
for_each_string_list(add_to_tail, &remote_refs, &data);
string_list_clear(&remote_refs, 0);
}
static void check_not_current_branch(struct ref *ref_map)
{
struct branch *current_branch = branch_get(NULL);
if (is_bare_repository() || !current_branch)
return;
for (; ref_map; ref_map = ref_map->next)
if (ref_map->peer_ref && !strcmp(current_branch->refname,
ref_map->peer_ref->name))
die("Refusing to fetch into current branch %s "
"of non-bare repository", current_branch->refname);
}
static int truncate_fetch_head(void)
{
char *filename = git_path("FETCH_HEAD");
FILE *fp = fopen(filename, "w");
if (!fp)
return error("cannot open %s: %s\n", filename, strerror(errno));
fclose(fp);
return 0;
}
static int do_fetch(struct transport *transport,
struct refspec *refs, int ref_count)
{
struct string_list existing_refs = { NULL, 0, 0, 0 };
struct string_list_item *peer_item = NULL;
struct ref *ref_map;
struct ref *rm;
int autotags = (transport->remote->fetch_tags == 1);
for_each_ref(add_existing, &existing_refs);
if (transport->remote->fetch_tags == 2 && tags != TAGS_UNSET)
tags = TAGS_SET;
if (transport->remote->fetch_tags == -1)
tags = TAGS_UNSET;
if (!transport->get_refs_list || !transport->fetch)
die("Don't know how to fetch from %s", transport->url);
/* if not appending, truncate FETCH_HEAD */
if (!append && !dry_run) {
int errcode = truncate_fetch_head();
if (errcode)
return errcode;
}
ref_map = get_ref_map(transport, refs, ref_count, tags, &autotags);
if (!update_head_ok)
check_not_current_branch(ref_map);
for (rm = ref_map; rm; rm = rm->next) {
if (rm->peer_ref) {
peer_item = string_list_lookup(rm->peer_ref->name,
&existing_refs);
if (peer_item)
hashcpy(rm->peer_ref->old_sha1,
peer_item->util);
}
}
if (tags == TAGS_DEFAULT && autotags)
transport_set_option(transport, TRANS_OPT_FOLLOWTAGS, "1");
if (fetch_refs(transport, ref_map)) {
free_refs(ref_map);
return 1;
}
if (prune)
prune_refs(transport, ref_map);
free_refs(ref_map);
/* if neither --no-tags nor --tags was specified, do automated tag
* following ... */
if (tags == TAGS_DEFAULT && autotags) {
struct ref **tail = &ref_map;
ref_map = NULL;
find_non_local_tags(transport, &ref_map, &tail);
if (ref_map) {
transport_set_option(transport, TRANS_OPT_FOLLOWTAGS, NULL);
transport_set_option(transport, TRANS_OPT_DEPTH, "0");
fetch_refs(transport, ref_map);
}
free_refs(ref_map);
}
return 0;
}
static void set_option(const char *name, const char *value)
{
int r = transport_set_option(transport, name, value);
if (r < 0)
die("Option \"%s\" value \"%s\" is not valid for %s",
name, value, transport->url);
if (r > 0)
warning("Option \"%s\" is ignored for %s\n",
name, transport->url);
}
static int get_one_remote_for_fetch(struct remote *remote, void *priv)
{
struct string_list *list = priv;
if (!remote->skip_default_update)
string_list_append(remote->name, list);
return 0;
}
struct remote_group_data {
const char *name;
struct string_list *list;
};
static int get_remote_group(const char *key, const char *value, void *priv)
{
struct remote_group_data *g = priv;
if (!prefixcmp(key, "remotes.") &&
!strcmp(key + 8, g->name)) {
/* split list by white space */
int space = strcspn(value, " \t\n");
while (*value) {
if (space > 1) {
string_list_append(xstrndup(value, space),
g->list);
}
value += space + (value[space] != '\0');
space = strcspn(value, " \t\n");
}
}
return 0;
}
static int add_remote_or_group(const char *name, struct string_list *list)
{
int prev_nr = list->nr;
struct remote_group_data g = { name, list };
git_config(get_remote_group, &g);
if (list->nr == prev_nr) {
struct remote *remote;
if (!remote_is_configured(name))
return 0;
remote = remote_get(name);
string_list_append(remote->name, list);
}
return 1;
}
static int fetch_multiple(struct string_list *list)
{
int i, result = 0;
const char *argv[11] = { "fetch", "--append" };
int argc = 2;
if (dry_run)
argv[argc++] = "--dry-run";
if (prune)
argv[argc++] = "--prune";
if (update_head_ok)
argv[argc++] = "--update-head-ok";
if (force)
argv[argc++] = "--force";
if (keep)
argv[argc++] = "--keep";
if (verbosity >= 2)
argv[argc++] = "-v";
if (verbosity >= 1)
argv[argc++] = "-v";
else if (verbosity < 0)
argv[argc++] = "-q";
if (!append && !dry_run) {
int errcode = truncate_fetch_head();
if (errcode)
return errcode;
}
for (i = 0; i < list->nr; i++) {
const char *name = list->items[i].string;
argv[argc] = name;
argv[argc + 1] = NULL;
if (verbosity >= 0)
printf("Fetching %s\n", name);
if (run_command_v_opt(argv, RUN_GIT_CMD)) {
error("Could not fetch %s", name);
result = 1;
}
}
return result;
}
static int fetch_one(struct remote *remote, int argc, const char **argv)
{
int i;
static const char **refs = NULL;
int ref_nr = 0;
int exit_code;
if (!remote)
die("Where do you want to fetch from today?");
transport = transport_get(remote, NULL);
transport_set_verbosity(transport, verbosity, progress);
if (upload_pack)
set_option(TRANS_OPT_UPLOADPACK, upload_pack);
if (keep)
set_option(TRANS_OPT_KEEP, "yes");
if (depth)
set_option(TRANS_OPT_DEPTH, depth);
if (argc > 0) {
int j = 0;
refs = xcalloc(argc + 1, sizeof(const char *));
for (i = 0; i < argc; i++) {
if (!strcmp(argv[i], "tag")) {
char *ref;
i++;
if (i >= argc)
die("You need to specify a tag name.");
ref = xmalloc(strlen(argv[i]) * 2 + 22);
strcpy(ref, "refs/tags/");
strcat(ref, argv[i]);
strcat(ref, ":refs/tags/");
strcat(ref, argv[i]);
refs[j++] = ref;
} else
refs[j++] = argv[i];
}
refs[j] = NULL;
ref_nr = j;
}
sigchain_push_common(unlock_pack_on_signal);
atexit(unlock_pack);
exit_code = do_fetch(transport,
parse_fetch_refspec(ref_nr, refs), ref_nr);
transport_disconnect(transport);
transport = NULL;
return exit_code;
}
int cmd_fetch(int argc, const char **argv, const char *prefix)
{
int i;
struct string_list list = { NULL, 0, 0, 0 };
struct remote *remote;
int result = 0;
/* Record the command line for the reflog */
strbuf_addstr(&default_rla, "fetch");
for (i = 1; i < argc; i++)
strbuf_addf(&default_rla, " %s", argv[i]);
argc = parse_options(argc, argv, prefix,
builtin_fetch_options, builtin_fetch_usage, 0);
if (all) {
if (argc == 1)
die("fetch --all does not take a repository argument");
else if (argc > 1)
die("fetch --all does not make sense with refspecs");
(void) for_each_remote(get_one_remote_for_fetch, &list);
result = fetch_multiple(&list);
} else if (argc == 0) {
/* No arguments -- use default remote */
remote = remote_get(NULL);
result = fetch_one(remote, argc, argv);
} else if (multiple) {
/* All arguments are assumed to be remotes or groups */
for (i = 0; i < argc; i++)
if (!add_remote_or_group(argv[i], &list))
die("No such remote or remote group: %s", argv[i]);
result = fetch_multiple(&list);
} else {
/* Single remote or group */
(void) add_remote_or_group(argv[0], &list);
if (list.nr > 1) {
/* More than one remote */
if (argc > 1)
die("Fetching a group and specifying refspecs does not make sense");
result = fetch_multiple(&list);
} else {
/* Zero or one remotes */
remote = remote_get(argv[0]);
result = fetch_one(remote, argc-1, argv+1);
}
}
/* All names were strdup()ed or strndup()ed */
list.strdup_strings = 1;
string_list_clear(&list, 0);
return result;
}