git/http.c

2725 lines
72 KiB
C
Raw Normal View History

#include "git-compat-util.h"
#include "git-curl-compat.h"
#include "hex.h"
#include "http.h"
#include "config.h"
#include "pack.h"
#include "sideband.h"
#include "run-command.h"
#include "url.h"
#include "urlmatch.h"
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 18:31:21 +08:00
#include "credential.h"
#include "version.h"
#include "pkt-line.h"
#include "gettext.h"
#include "trace.h"
http: limit redirection to protocol-whitelist Previously, libcurl would follow redirection to any protocol it was compiled for support with. This is desirable to allow redirection from HTTP to HTTPS. However, it would even successfully allow redirection from HTTP to SFTP, a protocol that git does not otherwise support at all. Furthermore git's new protocol-whitelisting could be bypassed by following a redirect within the remote helper, as it was only enforced at transport selection time. This patch limits redirects within libcurl to HTTP, HTTPS, FTP and FTPS. If there is a protocol-whitelist present, this list is limited to those also allowed by the whitelist. As redirection happens from within libcurl, it is impossible for an HTTP redirect to a protocol implemented within another remote helper. When the curl version git was compiled with is too old to support restrictions on protocol redirection, we warn the user if GIT_ALLOW_PROTOCOL restrictions were requested. This is a little inaccurate, as even without that variable in the environment, we would still restrict SFTP, etc, and we do not warn in that case. But anything else means we would literally warn every time git accesses an http remote. This commit includes a test, but it is not as robust as we would hope. It redirects an http request to ftp, and checks that curl complained about the protocol, which means that we are relying on curl's specific error message to know what happened. Ideally we would redirect to a working ftp server and confirm that we can clone without protocol restrictions, and not with them. But we do not have a portable way of providing an ftp server, nor any other protocol that curl supports (https is the closest, but we would have to deal with certificates). [jk: added test and version warning] Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-23 06:06:04 +08:00
#include "transport.h"
#include "packfile.h"
#include "protocol.h"
#include "string-list.h"
#include "object-file.h"
#include "object-store-ll.h"
static struct trace_key trace_curl = TRACE_KEY_INIT(CURL);
static int trace_curl_data = 1;
static int trace_curl_redact = 1;
long int git_curl_ipresolve = CURL_IPRESOLVE_WHATEVER;
int active_requests;
int http_is_verbose;
ssize_t http_post_buffer = 16 * LARGE_PACKET_MAX;
static int min_curl_sessions = 1;
static int curl_session_count;
static int max_requests = -1;
static CURLM *curlm;
static CURL *curl_default;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
#define PREV_BUF_SIZE 4096
char curl_errorstr[CURL_ERROR_SIZE];
static int curl_ssl_verify = -1;
static int curl_ssl_try;
static const char *curl_http_version = NULL;
static const char *ssl_cert;
static const char *ssl_cert_type;
static const char *ssl_cipherlist;
static const char *ssl_version;
static struct {
const char *name;
long ssl_version;
} sslversions[] = {
{ "sslv2", CURL_SSLVERSION_SSLv2 },
{ "sslv3", CURL_SSLVERSION_SSLv3 },
{ "tlsv1", CURL_SSLVERSION_TLSv1 },
#ifdef GIT_CURL_HAVE_CURL_SSLVERSION_TLSv1_0
{ "tlsv1.0", CURL_SSLVERSION_TLSv1_0 },
{ "tlsv1.1", CURL_SSLVERSION_TLSv1_1 },
{ "tlsv1.2", CURL_SSLVERSION_TLSv1_2 },
#endif
#ifdef GIT_CURL_HAVE_CURL_SSLVERSION_TLSv1_3
{ "tlsv1.3", CURL_SSLVERSION_TLSv1_3 },
#endif
};
static const char *ssl_key;
static const char *ssl_key_type;
static const char *ssl_capath;
static const char *curl_no_proxy;
#ifdef GIT_CURL_HAVE_CURLOPT_PINNEDPUBLICKEY
static const char *ssl_pinnedkey;
#endif
static const char *ssl_cainfo;
static long curl_low_speed_limit = -1;
static long curl_low_speed_time = -1;
static int curl_ftp_no_epsv;
static const char *curl_http_proxy;
static const char *http_proxy_authmethod;
static const char *http_proxy_ssl_cert;
static const char *http_proxy_ssl_key;
static const char *http_proxy_ssl_ca_info;
static struct credential proxy_cert_auth = CREDENTIAL_INIT;
static int proxy_ssl_cert_password_required;
static struct {
const char *name;
long curlauth_param;
} proxy_authmethods[] = {
{ "basic", CURLAUTH_BASIC },
{ "digest", CURLAUTH_DIGEST },
{ "negotiate", CURLAUTH_GSSNEGOTIATE },
{ "ntlm", CURLAUTH_NTLM },
{ "anyauth", CURLAUTH_ANY },
/*
* CURLAUTH_DIGEST_IE has no corresponding command-line option in
* curl(1) and is not included in CURLAUTH_ANY, so we leave it out
* here, too
*/
};
#ifdef CURLGSSAPI_DELEGATION_FLAG
static const char *curl_deleg;
static struct {
const char *name;
long curl_deleg_param;
} curl_deleg_levels[] = {
{ "none", CURLGSSAPI_DELEGATION_NONE },
{ "policy", CURLGSSAPI_DELEGATION_POLICY_FLAG },
{ "always", CURLGSSAPI_DELEGATION_FLAG },
};
#endif
static struct credential proxy_auth = CREDENTIAL_INIT;
static const char *curl_proxyuserpwd;
static const char *curl_cookie_file;
static int curl_save_cookies;
http: hoist credential request out of handle_curl_result When we are handling a curl response code in http_request or in the remote-curl RPC code, we use the handle_curl_result helper to translate curl's response into an easy-to-use code. When we see an HTTP 401, we do one of two things: 1. If we already had a filled-in credential, we mark it as rejected, and then return HTTP_NOAUTH to indicate to the caller that we failed. 2. If we didn't, then we ask for a new credential and tell the caller HTTP_REAUTH to indicate that they may want to try again. Rejecting in the first case makes sense; it is the natural result of the request we just made. However, prompting for more credentials in the second step does not always make sense. We do not know for sure that the caller is going to make a second request, and nor are we sure that it will be to the same URL. Logically, the prompt belongs not to the request we just finished, but to the request we are (maybe) about to make. In practice, it is very hard to trigger any bad behavior. Currently, if we make a second request, it will always be to the same URL (even in the face of redirects, because curl handles the redirects internally). And we almost always retry on HTTP_REAUTH these days. The one exception is if we are streaming a large RPC request to the server (e.g., a pushed packfile), in which case we cannot restart. It's extremely unlikely to see a 401 response at this stage, though, as we would typically have seen it when we sent a probe request, before streaming the data. This patch drops the automatic prompt out of case 2, and instead requires the caller to do it. This is a few extra lines of code, and the bug it fixes is unlikely to come up in practice. But it is conceptually cleaner, and paves the way for better handling of credentials across redirects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:31:45 +08:00
struct credential http_auth = CREDENTIAL_INIT;
static int http_proactive_auth;
static const char *user_agent;
static int curl_empty_auth = -1;
http: make redirects more obvious We instruct curl to always follow HTTP redirects. This is convenient, but it creates opportunities for malicious servers to create confusing situations. For instance, imagine Alice is a git user with access to a private repository on Bob's server. Mallory runs her own server and wants to access objects from Bob's repository. Mallory may try a few tricks that involve asking Alice to clone from her, build on top, and then push the result: 1. Mallory may simply redirect all fetch requests to Bob's server. Git will transparently follow those redirects and fetch Bob's history, which Alice may believe she got from Mallory. The subsequent push seems like it is just feeding Mallory back her own objects, but is actually leaking Bob's objects. There is nothing in git's output to indicate that Bob's repository was involved at all. The downside (for Mallory) of this attack is that Alice will have received Bob's entire repository, and is likely to notice that when building on top of it. 2. If Mallory happens to know the sha1 of some object X in Bob's repository, she can instead build her own history that references that object. She then runs a dumb http server, and Alice's client will fetch each object individually. When it asks for X, Mallory redirects her to Bob's server. The end result is that Alice obtains objects from Bob, but they may be buried deep in history. Alice is less likely to notice. Both of these attacks are fairly hard to pull off. There's a social component in getting Mallory to convince Alice to work with her. Alice may be prompted for credentials in accessing Bob's repository (but not always, if she is using a credential helper that caches). Attack (1) requires a certain amount of obliviousness on Alice's part while making a new commit. Attack (2) requires that Mallory knows a sha1 in Bob's repository, that Bob's server supports dumb http, and that the object in question is loose on Bob's server. But we can probably make things a bit more obvious without any loss of functionality. This patch does two things to that end. First, when we encounter a whole-repo redirect during the initial ref discovery, we now inform the user on stderr, making attack (1) much more obvious. Second, the decision to follow redirects is now configurable. The truly paranoid can set the new http.followRedirects to false to avoid any redirection entirely. But for a more practical default, we will disallow redirects only after the initial ref discovery. This is enough to thwart attacks similar to (2), while still allowing the common use of redirects at the repository level. Since c93c92f30 (http: update base URLs when we see redirects, 2013-09-28) we re-root all further requests from the redirect destination, which should generally mean that no further redirection is necessary. As an escape hatch, in case there really is a server that needs to redirect individual requests, the user can set http.followRedirects to "true" (and this can be done on a per-server basis via http.*.followRedirects config). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 02:24:41 +08:00
enum http_follow_config http_follow_config = HTTP_FOLLOW_INITIAL;
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 18:31:21 +08:00
static struct credential cert_auth = CREDENTIAL_INIT;
static int ssl_cert_password_required;
static unsigned long http_auth_methods = CURLAUTH_ANY;
static int http_auth_methods_restricted;
/* Modes for which empty_auth cannot actually help us. */
static unsigned long empty_auth_useless =
CURLAUTH_BASIC
| CURLAUTH_DIGEST_IE
| CURLAUTH_DIGEST;
static struct curl_slist *pragma_header;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
static struct curl_slist *no_pragma_header;
static struct string_list extra_http_headers = STRING_LIST_INIT_DUP;
static struct curl_slist *host_resolutions;
static struct active_request_slot *active_queue_head;
static char *cached_accept_language;
static char *http_ssl_backend;
static int http_schannel_check_revoke = 1;
/*
* With the backend being set to `schannel`, setting sslCAinfo would override
* the Certificate Store in cURL v7.60.0 and later, which is not what we want
* by default.
*/
static int http_schannel_use_ssl_cainfo;
size_t fread_buffer(char *ptr, size_t eltsize, size_t nmemb, void *buffer_)
{
size_t size = eltsize * nmemb;
struct buffer *buffer = buffer_;
if (size > buffer->buf.len - buffer->posn)
size = buffer->buf.len - buffer->posn;
memcpy(ptr, buffer->buf.buf + buffer->posn, size);
buffer->posn += size;
return size / eltsize;
}
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION The IOCTLFUNCTION option has been deprecated, and generates a compiler warning in recent versions of curl. We can switch to using SEEKFUNCTION instead. It was added in 2008 via curl 7.18.0; our INSTALL file already indicates we require at least curl 7.19.4. But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL}, and those didn't arrive until 7.19.5. One workaround would be to use a bare 0/1 here (or define our own macros). But let's just bump the minimum required version to 7.19.5. That version is only a minor version bump from our existing requirement, and is only a 2 month time bump for versions that are almost 13 years old. So it's not likely that anybody cares about the distinction. Switching means we have to rewrite the ioctl functions into seek functions. In some ways they are simpler (seeking is the only operation), but in some ways more complex (the ioctl allowed only a full rewind, but now we can seek to arbitrary offsets). Curl will only ever use SEEK_SET (per their documentation), so I didn't bother implementing anything else, since it would naturally be completely untested. This seems unlikely to change, but I added an assertion just in case. Likewise, I doubt curl will ever try to seek outside of the buffer sizes we've told it, but I erred on the defensive side here, rather than do an out-of-bounds read. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 11:04:44 +08:00
int seek_buffer(void *clientp, curl_off_t offset, int origin)
{
struct buffer *buffer = clientp;
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION The IOCTLFUNCTION option has been deprecated, and generates a compiler warning in recent versions of curl. We can switch to using SEEKFUNCTION instead. It was added in 2008 via curl 7.18.0; our INSTALL file already indicates we require at least curl 7.19.4. But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL}, and those didn't arrive until 7.19.5. One workaround would be to use a bare 0/1 here (or define our own macros). But let's just bump the minimum required version to 7.19.5. That version is only a minor version bump from our existing requirement, and is only a 2 month time bump for versions that are almost 13 years old. So it's not likely that anybody cares about the distinction. Switching means we have to rewrite the ioctl functions into seek functions. In some ways they are simpler (seeking is the only operation), but in some ways more complex (the ioctl allowed only a full rewind, but now we can seek to arbitrary offsets). Curl will only ever use SEEK_SET (per their documentation), so I didn't bother implementing anything else, since it would naturally be completely untested. This seems unlikely to change, but I added an assertion just in case. Likewise, I doubt curl will ever try to seek outside of the buffer sizes we've told it, but I erred on the defensive side here, rather than do an out-of-bounds read. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 11:04:44 +08:00
if (origin != SEEK_SET)
BUG("seek_buffer only handles SEEK_SET");
if (offset < 0 || offset >= buffer->buf.len) {
error("curl seek would be outside of buffer");
return CURL_SEEKFUNC_FAIL;
}
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION The IOCTLFUNCTION option has been deprecated, and generates a compiler warning in recent versions of curl. We can switch to using SEEKFUNCTION instead. It was added in 2008 via curl 7.18.0; our INSTALL file already indicates we require at least curl 7.19.4. But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL}, and those didn't arrive until 7.19.5. One workaround would be to use a bare 0/1 here (or define our own macros). But let's just bump the minimum required version to 7.19.5. That version is only a minor version bump from our existing requirement, and is only a 2 month time bump for versions that are almost 13 years old. So it's not likely that anybody cares about the distinction. Switching means we have to rewrite the ioctl functions into seek functions. In some ways they are simpler (seeking is the only operation), but in some ways more complex (the ioctl allowed only a full rewind, but now we can seek to arbitrary offsets). Curl will only ever use SEEK_SET (per their documentation), so I didn't bother implementing anything else, since it would naturally be completely untested. This seems unlikely to change, but I added an assertion just in case. Likewise, I doubt curl will ever try to seek outside of the buffer sizes we've told it, but I erred on the defensive side here, rather than do an out-of-bounds read. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 11:04:44 +08:00
buffer->posn = offset;
return CURL_SEEKFUNC_OK;
}
size_t fwrite_buffer(char *ptr, size_t eltsize, size_t nmemb, void *buffer_)
{
size_t size = eltsize * nmemb;
struct strbuf *buffer = buffer_;
strbuf_add(buffer, ptr, size);
return nmemb;
}
/*
* A folded header continuation line starts with any number of spaces or
* horizontal tab characters (SP or HTAB) as per RFC 7230 section 3.2.
* It is not a continuation line if the line starts with any other character.
*/
static inline int is_hdr_continuation(const char *ptr, const size_t size)
{
return size && (*ptr == ' ' || *ptr == '\t');
}
static size_t fwrite_wwwauth(char *ptr, size_t eltsize, size_t nmemb, void *p UNUSED)
{
size_t size = eltsize * nmemb;
struct strvec *values = &http_auth.wwwauth_headers;
struct strbuf buf = STRBUF_INIT;
const char *val;
size_t val_len;
/*
* Header lines may not come NULL-terminated from libcurl so we must
* limit all scans to the maximum length of the header line, or leverage
* strbufs for all operations.
*
* In addition, it is possible that header values can be split over
* multiple lines as per RFC 7230. 'Line folding' has been deprecated
* but older servers may still emit them. A continuation header field
* value is identified as starting with a space or horizontal tab.
*
* The formal definition of a header field as given in RFC 7230 is:
*
* header-field = field-name ":" OWS field-value OWS
*
* field-name = token
* field-value = *( field-content / obs-fold )
* field-content = field-vchar [ 1*( SP / HTAB ) field-vchar ]
* field-vchar = VCHAR / obs-text
*
* obs-fold = CRLF 1*( SP / HTAB )
* ; obsolete line folding
* ; see Section 3.2.4
*/
/* Start of a new WWW-Authenticate header */
if (skip_iprefix_mem(ptr, size, "www-authenticate:", &val, &val_len)) {
strbuf_add(&buf, val, val_len);
/*
* Strip the CRLF that should be present at the end of each
* field as well as any trailing or leading whitespace from the
* value.
*/
strbuf_trim(&buf);
strvec_push(values, buf.buf);
http_auth.header_is_last_match = 1;
goto exit;
}
/*
* This line could be a continuation of the previously matched header
* field. If this is the case then we should append this value to the
* end of the previously consumed value.
*/
if (http_auth.header_is_last_match && is_hdr_continuation(ptr, size)) {
/*
* Trim the CRLF and any leading or trailing from this line.
*/
strbuf_add(&buf, ptr, size);
strbuf_trim(&buf);
/*
* At this point we should always have at least one existing
* value, even if it is empty. Do not bother appending the new
* value if this continuation header is itself empty.
*/
if (!values->nr) {
BUG("should have at least one existing header value");
} else if (buf.len) {
char *prev = xstrdup(values->v[values->nr - 1]);
/* Join two non-empty values with a single space. */
const char *const sp = *prev ? " " : "";
strvec_pop(values);
strvec_pushf(values, "%s%s%s", prev, sp, buf.buf);
free(prev);
}
goto exit;
}
/* Not a continuation of a previously matched auth header line. */
http_auth.header_is_last_match = 0;
/*
* If this is a HTTP status line and not a header field, this signals
* a different HTTP response. libcurl writes all the output of all
* response headers of all responses, including redirects.
* We only care about the last HTTP request response's headers so clear
* the existing array.
*/
if (skip_iprefix_mem(ptr, size, "http/", &val, &val_len))
strvec_clear(values);
exit:
strbuf_release(&buf);
return size;
}
size_t fwrite_null(char *ptr UNUSED, size_t eltsize UNUSED, size_t nmemb,
void *data UNUSED)
{
return nmemb;
}
static void closedown_active_slot(struct active_request_slot *slot)
{
active_requests--;
slot->in_use = 0;
}
static void finish_active_slot(struct active_request_slot *slot)
{
closedown_active_slot(slot);
curl_easy_getinfo(slot->curl, CURLINFO_HTTP_CODE, &slot->http_code);
if (slot->finished)
(*slot->finished) = 1;
/* Store slot results so they can be read after the slot is reused */
if (slot->results) {
slot->results->curl_result = slot->curl_result;
slot->results->http_code = slot->http_code;
curl_easy_getinfo(slot->curl, CURLINFO_HTTPAUTH_AVAIL,
&slot->results->auth_avail);
curl_easy_getinfo(slot->curl, CURLINFO_HTTP_CONNECTCODE,
&slot->results->http_connectcode);
}
/* Run callback if appropriate */
if (slot->callback_func)
slot->callback_func(slot->callback_data);
}
static void xmulti_remove_handle(struct active_request_slot *slot)
{
curl_multi_remove_handle(curlm, slot->curl);
}
static void process_curl_messages(void)
{
int num_messages;
struct active_request_slot *slot;
CURLMsg *curl_message = curl_multi_info_read(curlm, &num_messages);
while (curl_message != NULL) {
if (curl_message->msg == CURLMSG_DONE) {
int curl_result = curl_message->data.result;
slot = active_queue_head;
while (slot != NULL &&
slot->curl != curl_message->easy_handle)
slot = slot->next;
if (slot) {
xmulti_remove_handle(slot);
slot->curl_result = curl_result;
finish_active_slot(slot);
} else {
fprintf(stderr, "Received DONE message for unknown request!\n");
}
} else {
fprintf(stderr, "Unknown CURL message received: %d\n",
(int)curl_message->msg);
}
curl_message = curl_multi_info_read(curlm, &num_messages);
}
}
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-29 03:26:22 +08:00
static int http_options(const char *var, const char *value,
const struct config_context *ctx, void *data)
{
if (!strcmp("http.version", var)) {
return git_config_string(&curl_http_version, var, value);
}
if (!strcmp("http.sslverify", var)) {
curl_ssl_verify = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.sslcipherlist", var))
return git_config_string(&ssl_cipherlist, var, value);
if (!strcmp("http.sslversion", var))
return git_config_string(&ssl_version, var, value);
if (!strcmp("http.sslcert", var))
return git_config_pathname(&ssl_cert, var, value);
if (!strcmp("http.sslcerttype", var))
return git_config_string(&ssl_cert_type, var, value);
if (!strcmp("http.sslkey", var))
return git_config_pathname(&ssl_key, var, value);
if (!strcmp("http.sslkeytype", var))
return git_config_string(&ssl_key_type, var, value);
if (!strcmp("http.sslcapath", var))
return git_config_pathname(&ssl_capath, var, value);
if (!strcmp("http.sslcainfo", var))
return git_config_pathname(&ssl_cainfo, var, value);
if (!strcmp("http.sslcertpasswordprotected", var)) {
ssl_cert_password_required = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.ssltry", var)) {
curl_ssl_try = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.sslbackend", var)) {
free(http_ssl_backend);
http_ssl_backend = xstrdup_or_null(value);
return 0;
}
if (!strcmp("http.schannelcheckrevoke", var)) {
http_schannel_check_revoke = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.schannelusesslcainfo", var)) {
http_schannel_use_ssl_cainfo = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.minsessions", var)) {
min_curl_sessions = git_config_int(var, value, ctx->kvi);
if (min_curl_sessions > 1)
min_curl_sessions = 1;
return 0;
}
if (!strcmp("http.maxrequests", var)) {
max_requests = git_config_int(var, value, ctx->kvi);
return 0;
}
if (!strcmp("http.lowspeedlimit", var)) {
curl_low_speed_limit = (long)git_config_int(var, value, ctx->kvi);
return 0;
}
if (!strcmp("http.lowspeedtime", var)) {
curl_low_speed_time = (long)git_config_int(var, value, ctx->kvi);
return 0;
}
if (!strcmp("http.noepsv", var)) {
curl_ftp_no_epsv = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.proxy", var))
return git_config_string(&curl_http_proxy, var, value);
if (!strcmp("http.proxyauthmethod", var))
return git_config_string(&http_proxy_authmethod, var, value);
if (!strcmp("http.proxysslcert", var))
return git_config_string(&http_proxy_ssl_cert, var, value);
if (!strcmp("http.proxysslkey", var))
return git_config_string(&http_proxy_ssl_key, var, value);
if (!strcmp("http.proxysslcainfo", var))
return git_config_string(&http_proxy_ssl_ca_info, var, value);
if (!strcmp("http.proxysslcertpasswordprotected", var)) {
proxy_ssl_cert_password_required = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.cookiefile", var))
return git_config_pathname(&curl_cookie_file, var, value);
if (!strcmp("http.savecookies", var)) {
curl_save_cookies = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.postbuffer", var)) {
http_post_buffer = git_config_ssize_t(var, value, ctx->kvi);
if (http_post_buffer < 0)
warning(_("negative value for http.postBuffer; defaulting to %d"), LARGE_PACKET_MAX);
if (http_post_buffer < LARGE_PACKET_MAX)
http_post_buffer = LARGE_PACKET_MAX;
return 0;
}
if (!strcmp("http.useragent", var))
return git_config_string(&user_agent, var, value);
if (!strcmp("http.emptyauth", var)) {
if (value && !strcmp("auto", value))
curl_empty_auth = -1;
else
curl_empty_auth = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.delegation", var)) {
#ifdef CURLGSSAPI_DELEGATION_FLAG
return git_config_string(&curl_deleg, var, value);
#else
warning(_("Delegation control is not supported with cURL < 7.22.0"));
return 0;
#endif
}
if (!strcmp("http.pinnedpubkey", var)) {
#ifdef GIT_CURL_HAVE_CURLOPT_PINNEDPUBLICKEY
return git_config_pathname(&ssl_pinnedkey, var, value);
#else
warning(_("Public key pinning not supported with cURL < 7.39.0"));
return 0;
#endif
}
if (!strcmp("http.extraheader", var)) {
if (!value) {
return config_error_nonbool(var);
} else if (!*value) {
string_list_clear(&extra_http_headers, 0);
} else {
string_list_append(&extra_http_headers, value);
}
return 0;
}
if (!strcmp("http.curloptresolve", var)) {
if (!value) {
return config_error_nonbool(var);
} else if (!*value) {
curl_slist_free_all(host_resolutions);
host_resolutions = NULL;
} else {
host_resolutions = curl_slist_append(host_resolutions, value);
}
return 0;
}
http: make redirects more obvious We instruct curl to always follow HTTP redirects. This is convenient, but it creates opportunities for malicious servers to create confusing situations. For instance, imagine Alice is a git user with access to a private repository on Bob's server. Mallory runs her own server and wants to access objects from Bob's repository. Mallory may try a few tricks that involve asking Alice to clone from her, build on top, and then push the result: 1. Mallory may simply redirect all fetch requests to Bob's server. Git will transparently follow those redirects and fetch Bob's history, which Alice may believe she got from Mallory. The subsequent push seems like it is just feeding Mallory back her own objects, but is actually leaking Bob's objects. There is nothing in git's output to indicate that Bob's repository was involved at all. The downside (for Mallory) of this attack is that Alice will have received Bob's entire repository, and is likely to notice that when building on top of it. 2. If Mallory happens to know the sha1 of some object X in Bob's repository, she can instead build her own history that references that object. She then runs a dumb http server, and Alice's client will fetch each object individually. When it asks for X, Mallory redirects her to Bob's server. The end result is that Alice obtains objects from Bob, but they may be buried deep in history. Alice is less likely to notice. Both of these attacks are fairly hard to pull off. There's a social component in getting Mallory to convince Alice to work with her. Alice may be prompted for credentials in accessing Bob's repository (but not always, if she is using a credential helper that caches). Attack (1) requires a certain amount of obliviousness on Alice's part while making a new commit. Attack (2) requires that Mallory knows a sha1 in Bob's repository, that Bob's server supports dumb http, and that the object in question is loose on Bob's server. But we can probably make things a bit more obvious without any loss of functionality. This patch does two things to that end. First, when we encounter a whole-repo redirect during the initial ref discovery, we now inform the user on stderr, making attack (1) much more obvious. Second, the decision to follow redirects is now configurable. The truly paranoid can set the new http.followRedirects to false to avoid any redirection entirely. But for a more practical default, we will disallow redirects only after the initial ref discovery. This is enough to thwart attacks similar to (2), while still allowing the common use of redirects at the repository level. Since c93c92f30 (http: update base URLs when we see redirects, 2013-09-28) we re-root all further requests from the redirect destination, which should generally mean that no further redirection is necessary. As an escape hatch, in case there really is a server that needs to redirect individual requests, the user can set http.followRedirects to "true" (and this can be done on a per-server basis via http.*.followRedirects config). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 02:24:41 +08:00
if (!strcmp("http.followredirects", var)) {
if (value && !strcmp(value, "initial"))
http_follow_config = HTTP_FOLLOW_INITIAL;
else if (git_config_bool(var, value))
http_follow_config = HTTP_FOLLOW_ALWAYS;
else
http_follow_config = HTTP_FOLLOW_NONE;
return 0;
}
/* Fall back on the default ones */
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-29 03:26:22 +08:00
return git_default_config(var, value, ctx, data);
}
static int curl_empty_auth_enabled(void)
{
if (curl_empty_auth >= 0)
return curl_empty_auth;
/*
* In the automatic case, kick in the empty-auth
* hack as long as we would potentially try some
* method more exotic than "Basic" or "Digest".
*
* But only do this when this is our second or
* subsequent request, as by then we know what
* methods are available.
*/
if (http_auth_methods_restricted &&
(http_auth_methods & ~empty_auth_useless))
return 1;
return 0;
}
static void init_curl_http_auth(CURL *result)
{
if (!http_auth.username || !*http_auth.username) {
if (curl_empty_auth_enabled())
curl_easy_setopt(result, CURLOPT_USERPWD, ":");
return;
}
credential_fill(&http_auth);
curl_easy_setopt(result, CURLOPT_USERNAME, http_auth.username);
curl_easy_setopt(result, CURLOPT_PASSWORD, http_auth.password);
}
/* *var must be free-able */
static void var_override(const char **var, char *value)
{
if (value) {
free((void *)*var);
*var = xstrdup(value);
}
}
static void set_proxyauth_name_password(CURL *result)
{
curl_easy_setopt(result, CURLOPT_PROXYUSERNAME,
proxy_auth.username);
curl_easy_setopt(result, CURLOPT_PROXYPASSWORD,
proxy_auth.password);
}
static void init_curl_proxy_auth(CURL *result)
{
if (proxy_auth.username) {
if (!proxy_auth.password)
credential_fill(&proxy_auth);
set_proxyauth_name_password(result);
}
var_override(&http_proxy_authmethod, getenv("GIT_HTTP_PROXY_AUTHMETHOD"));
if (http_proxy_authmethod) {
int i;
for (i = 0; i < ARRAY_SIZE(proxy_authmethods); i++) {
if (!strcmp(http_proxy_authmethod, proxy_authmethods[i].name)) {
curl_easy_setopt(result, CURLOPT_PROXYAUTH,
proxy_authmethods[i].curlauth_param);
break;
}
}
if (i == ARRAY_SIZE(proxy_authmethods)) {
warning("unsupported proxy authentication method %s: using anyauth",
http_proxy_authmethod);
curl_easy_setopt(result, CURLOPT_PROXYAUTH, CURLAUTH_ANY);
}
}
else
curl_easy_setopt(result, CURLOPT_PROXYAUTH, CURLAUTH_ANY);
}
static int has_cert_password(void)
{
if (ssl_cert == NULL || ssl_cert_password_required != 1)
return 0;
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 18:31:21 +08:00
if (!cert_auth.password) {
cert_auth.protocol = xstrdup("cert");
cert_auth.host = xstrdup("");
cert_auth.username = xstrdup("");
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 18:31:21 +08:00
cert_auth.path = xstrdup(ssl_cert);
credential_fill(&cert_auth);
}
return 1;
}
#ifdef GIT_CURL_HAVE_CURLOPT_PROXY_KEYPASSWD
static int has_proxy_cert_password(void)
{
if (http_proxy_ssl_cert == NULL || proxy_ssl_cert_password_required != 1)
return 0;
if (!proxy_cert_auth.password) {
proxy_cert_auth.protocol = xstrdup("cert");
proxy_cert_auth.host = xstrdup("");
proxy_cert_auth.username = xstrdup("");
proxy_cert_auth.path = xstrdup(http_proxy_ssl_cert);
credential_fill(&proxy_cert_auth);
}
return 1;
}
#endif
#ifdef GITCURL_HAVE_CURLOPT_TCP_KEEPALIVE
static void set_curl_keepalive(CURL *c)
{
curl_easy_setopt(c, CURLOPT_TCP_KEEPALIVE, 1);
}
#else
static int sockopt_callback(void *client, curl_socket_t fd, curlsocktype type)
{
int ka = 1;
int rc;
socklen_t len = (socklen_t)sizeof(ka);
if (type != CURLSOCKTYPE_IPCXN)
return 0;
rc = setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, (void *)&ka, len);
if (rc < 0)
warning_errno("unable to set SO_KEEPALIVE on socket");
return CURL_SOCKOPT_OK;
}
static void set_curl_keepalive(CURL *c)
{
curl_easy_setopt(c, CURLOPT_SOCKOPTFUNCTION, sockopt_callback);
}
#endif
/* Return 1 if redactions have been made, 0 otherwise. */
static int redact_sensitive_header(struct strbuf *header, size_t offset)
{
int ret = 0;
const char *sensitive_header;
if (trace_curl_redact &&
(skip_iprefix(header->buf + offset, "Authorization:", &sensitive_header) ||
skip_iprefix(header->buf + offset, "Proxy-Authorization:", &sensitive_header))) {
/* The first token is the type, which is OK to log */
while (isspace(*sensitive_header))
sensitive_header++;
while (*sensitive_header && !isspace(*sensitive_header))
sensitive_header++;
/* Everything else is opaque and possibly sensitive */
strbuf_setlen(header, sensitive_header - header->buf);
strbuf_addstr(header, " <redacted>");
ret = 1;
} else if (trace_curl_redact &&
skip_iprefix(header->buf + offset, "Cookie:", &sensitive_header)) {
struct strbuf redacted_header = STRBUF_INIT;
const char *cookie;
while (isspace(*sensitive_header))
sensitive_header++;
cookie = sensitive_header;
while (cookie) {
char *equals;
char *semicolon = strstr(cookie, "; ");
if (semicolon)
*semicolon = 0;
equals = strchrnul(cookie, '=');
if (!equals) {
/* invalid cookie, just append and continue */
strbuf_addstr(&redacted_header, cookie);
continue;
}
strbuf_add(&redacted_header, cookie, equals - cookie);
strbuf_addstr(&redacted_header, "=<redacted>");
if (semicolon) {
/*
* There are more cookies. (Or, for some
* reason, the input string ends in "; ".)
*/
strbuf_addstr(&redacted_header, "; ");
cookie = semicolon + strlen("; ");
} else {
cookie = NULL;
}
}
strbuf_setlen(header, sensitive_header - header->buf);
strbuf_addbuf(header, &redacted_header);
ret = 1;
}
return ret;
}
static int match_curl_h2_trace(const char *line, const char **out)
{
const char *p;
/*
* curl prior to 8.1.0 gives us:
*
* h2h3 [<header-name>: <header-val>]
*
* Starting in 8.1.0, the first token became just "h2".
*/
if (skip_iprefix(line, "h2h3 [", out) ||
skip_iprefix(line, "h2 [", out))
return 1;
/*
* curl 8.3.0 uses:
* [HTTP/2] [<stream-id>] [<header-name>: <header-val>]
* where <stream-id> is numeric.
*/
if (skip_iprefix(line, "[HTTP/2] [", &p)) {
while (isdigit(*p))
p++;
if (skip_prefix(p, "] [", out))
return 1;
}
return 0;
}
/* Redact headers in info */
static void redact_sensitive_info_header(struct strbuf *header)
{
const char *sensitive_header;
if (trace_curl_redact &&
match_curl_h2_trace(header->buf, &sensitive_header)) {
if (redact_sensitive_header(header, sensitive_header - header->buf)) {
/* redaction ate our closing bracket */
strbuf_addch(header, ']');
}
}
}
static void curl_dump_header(const char *text, unsigned char *ptr, size_t size, int hide_sensitive_header)
{
struct strbuf out = STRBUF_INIT;
struct strbuf **headers, **header;
strbuf_addf(&out, "%s, %10.10ld bytes (0x%8.8lx)\n",
text, (long)size, (long)size);
trace_strbuf(&trace_curl, &out);
strbuf_reset(&out);
strbuf_add(&out, ptr, size);
headers = strbuf_split_max(&out, '\n', 0);
for (header = headers; *header; header++) {
if (hide_sensitive_header)
redact_sensitive_header(*header, 0);
strbuf_insertstr((*header), 0, text);
strbuf_insertstr((*header), strlen(text), ": ");
strbuf_rtrim((*header));
strbuf_addch((*header), '\n');
trace_strbuf(&trace_curl, (*header));
}
strbuf_list_free(headers);
strbuf_release(&out);
}
static void curl_dump_data(const char *text, unsigned char *ptr, size_t size)
{
size_t i;
struct strbuf out = STRBUF_INIT;
unsigned int width = 60;
strbuf_addf(&out, "%s, %10.10ld bytes (0x%8.8lx)\n",
text, (long)size, (long)size);
trace_strbuf(&trace_curl, &out);
for (i = 0; i < size; i += width) {
size_t w;
strbuf_reset(&out);
strbuf_addf(&out, "%s: ", text);
for (w = 0; (w < width) && (i + w < size); w++) {
unsigned char ch = ptr[i + w];
strbuf_addch(&out,
(ch >= 0x20) && (ch < 0x80)
? ch : '.');
}
strbuf_addch(&out, '\n');
trace_strbuf(&trace_curl, &out);
}
strbuf_release(&out);
}
static void curl_dump_info(char *data, size_t size)
{
struct strbuf buf = STRBUF_INIT;
strbuf_add(&buf, data, size);
redact_sensitive_info_header(&buf);
trace_printf_key(&trace_curl, "== Info: %s", buf.buf);
strbuf_release(&buf);
}
static int curl_trace(CURL *handle UNUSED, curl_infotype type,
char *data, size_t size,
void *userp UNUSED)
{
const char *text;
enum { NO_FILTER = 0, DO_FILTER = 1 };
switch (type) {
case CURLINFO_TEXT:
curl_dump_info(data, size);
break;
case CURLINFO_HEADER_OUT:
text = "=> Send header";
curl_dump_header(text, (unsigned char *)data, size, DO_FILTER);
break;
case CURLINFO_DATA_OUT:
if (trace_curl_data) {
text = "=> Send data";
curl_dump_data(text, (unsigned char *)data, size);
}
break;
case CURLINFO_SSL_DATA_OUT:
if (trace_curl_data) {
text = "=> Send SSL data";
curl_dump_data(text, (unsigned char *)data, size);
}
break;
case CURLINFO_HEADER_IN:
text = "<= Recv header";
curl_dump_header(text, (unsigned char *)data, size, NO_FILTER);
break;
case CURLINFO_DATA_IN:
if (trace_curl_data) {
text = "<= Recv data";
curl_dump_data(text, (unsigned char *)data, size);
}
break;
case CURLINFO_SSL_DATA_IN:
if (trace_curl_data) {
text = "<= Recv SSL data";
curl_dump_data(text, (unsigned char *)data, size);
}
break;
default: /* we ignore unknown types by default */
return 0;
}
return 0;
}
void http_trace_curl_no_data(void)
{
trace_override_envvar(&trace_curl, "1");
trace_curl_data = 0;
}
void setup_curl_trace(CURL *handle)
{
if (!trace_want(&trace_curl))
return;
curl_easy_setopt(handle, CURLOPT_VERBOSE, 1L);
curl_easy_setopt(handle, CURLOPT_DEBUGFUNCTION, curl_trace);
curl_easy_setopt(handle, CURLOPT_DEBUGDATA, NULL);
}
http: support CURLOPT_PROTOCOLS_STR The CURLOPT_PROTOCOLS (and matching CURLOPT_REDIR_PROTOCOLS) flag was deprecated in curl 7.85.0, and using it generate compiler warnings as of curl 7.87.0. The path forward is to use CURLOPT_PROTOCOLS_STR, but we can't just do so unilaterally, as it was only introduced less than a year ago in 7.85.0. Until that version becomes ubiquitous, we have to either disable the deprecation warning or conditionally use the "STR" variant on newer versions of libcurl. This patch switches to the new variant, which is nice for two reasons: - we don't have to worry that silencing curl's deprecation warnings might cause us to miss other more useful ones - we'd eventually want to move to the new variant anyway, so this gets us set up (albeit with some extra ugly boilerplate for the conditional) There are a lot of ways to split up the two cases. One way would be to abstract the storage type (strbuf versus a long), how to append (strbuf_addstr vs bitwise OR), how to initialize, which CURLOPT to use, and so on. But the resulting code looks pretty magical: GIT_CURL_PROTOCOL_TYPE allowed = GIT_CURL_PROTOCOL_TYPE_INIT; if (...http is allowed...) GIT_CURL_PROTOCOL_APPEND(&allowed, "http", CURLOPT_HTTP); and you end up with more "#define GIT_CURL_PROTOCOL_TYPE" macros than actual code. On the other end of the spectrum, we could just implement two separate functions, one that handles a string list and one that handles bits. But then we end up repeating our list of protocols (http, https, ftp, ftp). This patch takes the middle ground. The run-time code is always there to handle both types, and we just choose which one to feed to curl. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 11:04:48 +08:00
static void proto_list_append(struct strbuf *list, const char *proto)
{
http: support CURLOPT_PROTOCOLS_STR The CURLOPT_PROTOCOLS (and matching CURLOPT_REDIR_PROTOCOLS) flag was deprecated in curl 7.85.0, and using it generate compiler warnings as of curl 7.87.0. The path forward is to use CURLOPT_PROTOCOLS_STR, but we can't just do so unilaterally, as it was only introduced less than a year ago in 7.85.0. Until that version becomes ubiquitous, we have to either disable the deprecation warning or conditionally use the "STR" variant on newer versions of libcurl. This patch switches to the new variant, which is nice for two reasons: - we don't have to worry that silencing curl's deprecation warnings might cause us to miss other more useful ones - we'd eventually want to move to the new variant anyway, so this gets us set up (albeit with some extra ugly boilerplate for the conditional) There are a lot of ways to split up the two cases. One way would be to abstract the storage type (strbuf versus a long), how to append (strbuf_addstr vs bitwise OR), how to initialize, which CURLOPT to use, and so on. But the resulting code looks pretty magical: GIT_CURL_PROTOCOL_TYPE allowed = GIT_CURL_PROTOCOL_TYPE_INIT; if (...http is allowed...) GIT_CURL_PROTOCOL_APPEND(&allowed, "http", CURLOPT_HTTP); and you end up with more "#define GIT_CURL_PROTOCOL_TYPE" macros than actual code. On the other end of the spectrum, we could just implement two separate functions, one that handles a string list and one that handles bits. But then we end up repeating our list of protocols (http, https, ftp, ftp). This patch takes the middle ground. The run-time code is always there to handle both types, and we just choose which one to feed to curl. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 11:04:48 +08:00
if (!list)
return;
if (list->len)
strbuf_addch(list, ',');
strbuf_addstr(list, proto);
}
static long get_curl_allowed_protocols(int from_user, struct strbuf *list)
{
long bits = 0;
if (is_transport_allowed("http", from_user)) {
bits |= CURLPROTO_HTTP;
proto_list_append(list, "http");
}
if (is_transport_allowed("https", from_user)) {
bits |= CURLPROTO_HTTPS;
proto_list_append(list, "https");
}
if (is_transport_allowed("ftp", from_user)) {
bits |= CURLPROTO_FTP;
proto_list_append(list, "ftp");
}
if (is_transport_allowed("ftps", from_user)) {
bits |= CURLPROTO_FTPS;
proto_list_append(list, "ftps");
}
return bits;
}
#ifdef GIT_CURL_HAVE_CURL_HTTP_VERSION_2
static int get_curl_http_version_opt(const char *version_string, long *opt)
{
int i;
static struct {
const char *name;
long opt_token;
} choice[] = {
{ "HTTP/1.1", CURL_HTTP_VERSION_1_1 },
{ "HTTP/2", CURL_HTTP_VERSION_2 }
};
for (i = 0; i < ARRAY_SIZE(choice); i++) {
if (!strcmp(version_string, choice[i].name)) {
*opt = choice[i].opt_token;
return 0;
}
}
warning("unknown value given to http.version: '%s'", version_string);
return -1; /* not found */
}
#endif
static CURL *get_curl_handle(void)
{
CURL *result = curl_easy_init();
if (!result)
die("curl_easy_init failed");
if (!curl_ssl_verify) {
curl_easy_setopt(result, CURLOPT_SSL_VERIFYPEER, 0);
curl_easy_setopt(result, CURLOPT_SSL_VERIFYHOST, 0);
} else {
/* Verify authenticity of the peer's certificate */
curl_easy_setopt(result, CURLOPT_SSL_VERIFYPEER, 1);
/* The name in the cert must match whom we tried to connect */
curl_easy_setopt(result, CURLOPT_SSL_VERIFYHOST, 2);
}
#ifdef GIT_CURL_HAVE_CURL_HTTP_VERSION_2
if (curl_http_version) {
long opt;
if (!get_curl_http_version_opt(curl_http_version, &opt)) {
/* Set request use http version */
curl_easy_setopt(result, CURLOPT_HTTP_VERSION, opt);
}
}
#endif
curl_easy_setopt(result, CURLOPT_NETRC, CURL_NETRC_OPTIONAL);
curl_easy_setopt(result, CURLOPT_HTTPAUTH, CURLAUTH_ANY);
#ifdef CURLGSSAPI_DELEGATION_FLAG
if (curl_deleg) {
int i;
for (i = 0; i < ARRAY_SIZE(curl_deleg_levels); i++) {
if (!strcmp(curl_deleg, curl_deleg_levels[i].name)) {
curl_easy_setopt(result, CURLOPT_GSSAPI_DELEGATION,
curl_deleg_levels[i].curl_deleg_param);
break;
}
}
if (i == ARRAY_SIZE(curl_deleg_levels))
warning("Unknown delegation method '%s': using default",
curl_deleg);
}
#endif
if (http_ssl_backend && !strcmp("schannel", http_ssl_backend) &&
!http_schannel_check_revoke) {
#ifdef GIT_CURL_HAVE_CURLSSLOPT_NO_REVOKE
curl_easy_setopt(result, CURLOPT_SSL_OPTIONS, CURLSSLOPT_NO_REVOKE);
#else
warning(_("CURLSSLOPT_NO_REVOKE not supported with cURL < 7.44.0"));
#endif
}
if (http_proactive_auth)
init_curl_http_auth(result);
if (getenv("GIT_SSL_VERSION"))
ssl_version = getenv("GIT_SSL_VERSION");
if (ssl_version && *ssl_version) {
int i;
for (i = 0; i < ARRAY_SIZE(sslversions); i++) {
if (!strcmp(ssl_version, sslversions[i].name)) {
curl_easy_setopt(result, CURLOPT_SSLVERSION,
sslversions[i].ssl_version);
break;
}
}
if (i == ARRAY_SIZE(sslversions))
warning("unsupported ssl version %s: using default",
ssl_version);
}
if (getenv("GIT_SSL_CIPHER_LIST"))
ssl_cipherlist = getenv("GIT_SSL_CIPHER_LIST");
if (ssl_cipherlist != NULL && *ssl_cipherlist)
curl_easy_setopt(result, CURLOPT_SSL_CIPHER_LIST,
ssl_cipherlist);
if (ssl_cert)
curl_easy_setopt(result, CURLOPT_SSLCERT, ssl_cert);
if (ssl_cert_type)
curl_easy_setopt(result, CURLOPT_SSLCERTTYPE, ssl_cert_type);
if (has_cert_password())
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 18:31:21 +08:00
curl_easy_setopt(result, CURLOPT_KEYPASSWD, cert_auth.password);
if (ssl_key)
curl_easy_setopt(result, CURLOPT_SSLKEY, ssl_key);
if (ssl_key_type)
curl_easy_setopt(result, CURLOPT_SSLKEYTYPE, ssl_key_type);
if (ssl_capath)
curl_easy_setopt(result, CURLOPT_CAPATH, ssl_capath);
#ifdef GIT_CURL_HAVE_CURLOPT_PINNEDPUBLICKEY
if (ssl_pinnedkey)
curl_easy_setopt(result, CURLOPT_PINNEDPUBLICKEY, ssl_pinnedkey);
#endif
if (http_ssl_backend && !strcmp("schannel", http_ssl_backend) &&
!http_schannel_use_ssl_cainfo) {
curl_easy_setopt(result, CURLOPT_CAINFO, NULL);
#ifdef GIT_CURL_HAVE_CURLOPT_PROXY_CAINFO
curl_easy_setopt(result, CURLOPT_PROXY_CAINFO, NULL);
#endif
} else if (ssl_cainfo != NULL || http_proxy_ssl_ca_info != NULL) {
if (ssl_cainfo)
curl_easy_setopt(result, CURLOPT_CAINFO, ssl_cainfo);
#ifdef GIT_CURL_HAVE_CURLOPT_PROXY_CAINFO
if (http_proxy_ssl_ca_info)
curl_easy_setopt(result, CURLOPT_PROXY_CAINFO, http_proxy_ssl_ca_info);
#endif
}
if (curl_low_speed_limit > 0 && curl_low_speed_time > 0) {
curl_easy_setopt(result, CURLOPT_LOW_SPEED_LIMIT,
curl_low_speed_limit);
curl_easy_setopt(result, CURLOPT_LOW_SPEED_TIME,
curl_low_speed_time);
}
curl_easy_setopt(result, CURLOPT_MAXREDIRS, 20);
curl_easy_setopt(result, CURLOPT_POSTREDIR, CURL_REDIR_POST_ALL);
http: support CURLOPT_PROTOCOLS_STR The CURLOPT_PROTOCOLS (and matching CURLOPT_REDIR_PROTOCOLS) flag was deprecated in curl 7.85.0, and using it generate compiler warnings as of curl 7.87.0. The path forward is to use CURLOPT_PROTOCOLS_STR, but we can't just do so unilaterally, as it was only introduced less than a year ago in 7.85.0. Until that version becomes ubiquitous, we have to either disable the deprecation warning or conditionally use the "STR" variant on newer versions of libcurl. This patch switches to the new variant, which is nice for two reasons: - we don't have to worry that silencing curl's deprecation warnings might cause us to miss other more useful ones - we'd eventually want to move to the new variant anyway, so this gets us set up (albeit with some extra ugly boilerplate for the conditional) There are a lot of ways to split up the two cases. One way would be to abstract the storage type (strbuf versus a long), how to append (strbuf_addstr vs bitwise OR), how to initialize, which CURLOPT to use, and so on. But the resulting code looks pretty magical: GIT_CURL_PROTOCOL_TYPE allowed = GIT_CURL_PROTOCOL_TYPE_INIT; if (...http is allowed...) GIT_CURL_PROTOCOL_APPEND(&allowed, "http", CURLOPT_HTTP); and you end up with more "#define GIT_CURL_PROTOCOL_TYPE" macros than actual code. On the other end of the spectrum, we could just implement two separate functions, one that handles a string list and one that handles bits. But then we end up repeating our list of protocols (http, https, ftp, ftp). This patch takes the middle ground. The run-time code is always there to handle both types, and we just choose which one to feed to curl. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 11:04:48 +08:00
#ifdef GIT_CURL_HAVE_CURLOPT_PROTOCOLS_STR
{
struct strbuf buf = STRBUF_INIT;
get_curl_allowed_protocols(0, &buf);
curl_easy_setopt(result, CURLOPT_REDIR_PROTOCOLS_STR, buf.buf);
strbuf_reset(&buf);
get_curl_allowed_protocols(-1, &buf);
curl_easy_setopt(result, CURLOPT_PROTOCOLS_STR, buf.buf);
strbuf_release(&buf);
}
#else
curl_easy_setopt(result, CURLOPT_REDIR_PROTOCOLS,
http: support CURLOPT_PROTOCOLS_STR The CURLOPT_PROTOCOLS (and matching CURLOPT_REDIR_PROTOCOLS) flag was deprecated in curl 7.85.0, and using it generate compiler warnings as of curl 7.87.0. The path forward is to use CURLOPT_PROTOCOLS_STR, but we can't just do so unilaterally, as it was only introduced less than a year ago in 7.85.0. Until that version becomes ubiquitous, we have to either disable the deprecation warning or conditionally use the "STR" variant on newer versions of libcurl. This patch switches to the new variant, which is nice for two reasons: - we don't have to worry that silencing curl's deprecation warnings might cause us to miss other more useful ones - we'd eventually want to move to the new variant anyway, so this gets us set up (albeit with some extra ugly boilerplate for the conditional) There are a lot of ways to split up the two cases. One way would be to abstract the storage type (strbuf versus a long), how to append (strbuf_addstr vs bitwise OR), how to initialize, which CURLOPT to use, and so on. But the resulting code looks pretty magical: GIT_CURL_PROTOCOL_TYPE allowed = GIT_CURL_PROTOCOL_TYPE_INIT; if (...http is allowed...) GIT_CURL_PROTOCOL_APPEND(&allowed, "http", CURLOPT_HTTP); and you end up with more "#define GIT_CURL_PROTOCOL_TYPE" macros than actual code. On the other end of the spectrum, we could just implement two separate functions, one that handles a string list and one that handles bits. But then we end up repeating our list of protocols (http, https, ftp, ftp). This patch takes the middle ground. The run-time code is always there to handle both types, and we just choose which one to feed to curl. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 11:04:48 +08:00
get_curl_allowed_protocols(0, NULL));
curl_easy_setopt(result, CURLOPT_PROTOCOLS,
http: support CURLOPT_PROTOCOLS_STR The CURLOPT_PROTOCOLS (and matching CURLOPT_REDIR_PROTOCOLS) flag was deprecated in curl 7.85.0, and using it generate compiler warnings as of curl 7.87.0. The path forward is to use CURLOPT_PROTOCOLS_STR, but we can't just do so unilaterally, as it was only introduced less than a year ago in 7.85.0. Until that version becomes ubiquitous, we have to either disable the deprecation warning or conditionally use the "STR" variant on newer versions of libcurl. This patch switches to the new variant, which is nice for two reasons: - we don't have to worry that silencing curl's deprecation warnings might cause us to miss other more useful ones - we'd eventually want to move to the new variant anyway, so this gets us set up (albeit with some extra ugly boilerplate for the conditional) There are a lot of ways to split up the two cases. One way would be to abstract the storage type (strbuf versus a long), how to append (strbuf_addstr vs bitwise OR), how to initialize, which CURLOPT to use, and so on. But the resulting code looks pretty magical: GIT_CURL_PROTOCOL_TYPE allowed = GIT_CURL_PROTOCOL_TYPE_INIT; if (...http is allowed...) GIT_CURL_PROTOCOL_APPEND(&allowed, "http", CURLOPT_HTTP); and you end up with more "#define GIT_CURL_PROTOCOL_TYPE" macros than actual code. On the other end of the spectrum, we could just implement two separate functions, one that handles a string list and one that handles bits. But then we end up repeating our list of protocols (http, https, ftp, ftp). This patch takes the middle ground. The run-time code is always there to handle both types, and we just choose which one to feed to curl. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-01-17 11:04:48 +08:00
get_curl_allowed_protocols(-1, NULL));
#endif
if (getenv("GIT_CURL_VERBOSE"))
http_trace_curl_no_data();
setup_curl_trace(result);
if (getenv("GIT_TRACE_CURL_NO_DATA"))
trace_curl_data = 0;
if (!git_env_bool("GIT_TRACE_REDACT", 1))
trace_curl_redact = 0;
curl_easy_setopt(result, CURLOPT_USERAGENT,
user_agent ? user_agent : git_user_agent());
if (curl_ftp_no_epsv)
curl_easy_setopt(result, CURLOPT_FTP_USE_EPSV, 0);
if (curl_ssl_try)
curl_easy_setopt(result, CURLOPT_USE_SSL, CURLUSESSL_TRY);
/*
* CURL also examines these variables as a fallback; but we need to query
* them here in order to decide whether to prompt for missing password (cf.
* init_curl_proxy_auth()).
*
* Unlike many other common environment variables, these are historically
* lowercase only. It appears that CURL did not know this and implemented
* only uppercase variants, which was later corrected to take both - with
* the exception of http_proxy, which is lowercase only also in CURL. As
* the lowercase versions are the historical quasi-standard, they take
* precedence here, as in CURL.
*/
if (!curl_http_proxy) {
if (http_auth.protocol && !strcmp(http_auth.protocol, "https")) {
var_override(&curl_http_proxy, getenv("HTTPS_PROXY"));
var_override(&curl_http_proxy, getenv("https_proxy"));
} else {
var_override(&curl_http_proxy, getenv("http_proxy"));
}
if (!curl_http_proxy) {
var_override(&curl_http_proxy, getenv("ALL_PROXY"));
var_override(&curl_http_proxy, getenv("all_proxy"));
}
}
http: honor empty http.proxy option to bypass proxy Curl distinguishes between an empty proxy address and a NULL proxy address. In the first case it completely disables proxy usage, but if the proxy address option is NULL then curl attempts to determine the proxy address from the http_proxy environment variable. According to the documentation, if the http.proxy option is set to an empty string, git should bypass proxy and connect to the server directly: export http_proxy=http://network-proxy/ cd ~/foobar-project git config remote.origin.proxy "" git fetch Previously, proxy host was configured by one line: curl_easy_setopt(result, CURLOPT_PROXY, curl_http_proxy); Commit 372370f167 ("http: use credential API to handle proxy authentication", 2016-01-26) parses the proxy option, then extracts the proxy host address and updates the curl configuration, making the previous call a noop: credential_from_url(&proxy_auth, curl_http_proxy); curl_easy_setopt(result, CURLOPT_PROXY, proxy_auth.host); But if the proxy option is empty then the proxy host field becomes NULL. This forces curl to fall back to detecting the proxy configuration from the environment, causing the http.proxy option to not work anymore. Fix this issue by explicitly handling http.proxy being set the empty string. This also makes the code a bit more clear and should help us avoid such regressions in the future. Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-12 04:22:18 +08:00
if (curl_http_proxy && curl_http_proxy[0] == '\0') {
/*
* Handle case with the empty http.proxy value here to keep
* common code clean.
* NB: empty option disables proxying at all.
*/
curl_easy_setopt(result, CURLOPT_PROXY, "");
} else if (curl_http_proxy) {
if (starts_with(curl_http_proxy, "socks5h"))
curl_easy_setopt(result,
CURLOPT_PROXYTYPE, CURLPROXY_SOCKS5_HOSTNAME);
else if (starts_with(curl_http_proxy, "socks5"))
curl_easy_setopt(result,
CURLOPT_PROXYTYPE, CURLPROXY_SOCKS5);
else if (starts_with(curl_http_proxy, "socks4a"))
curl_easy_setopt(result,
CURLOPT_PROXYTYPE, CURLPROXY_SOCKS4A);
else if (starts_with(curl_http_proxy, "socks"))
curl_easy_setopt(result,
CURLOPT_PROXYTYPE, CURLPROXY_SOCKS4);
#ifdef GIT_CURL_HAVE_CURLOPT_PROXY_KEYPASSWD
else if (starts_with(curl_http_proxy, "https")) {
curl_easy_setopt(result, CURLOPT_PROXYTYPE, CURLPROXY_HTTPS);
if (http_proxy_ssl_cert)
curl_easy_setopt(result, CURLOPT_PROXY_SSLCERT, http_proxy_ssl_cert);
if (http_proxy_ssl_key)
curl_easy_setopt(result, CURLOPT_PROXY_SSLKEY, http_proxy_ssl_key);
if (has_proxy_cert_password())
curl_easy_setopt(result, CURLOPT_PROXY_KEYPASSWD, proxy_cert_auth.password);
}
#endif
if (strstr(curl_http_proxy, "://"))
credential_from_url(&proxy_auth, curl_http_proxy);
else {
struct strbuf url = STRBUF_INIT;
strbuf_addf(&url, "http://%s", curl_http_proxy);
credential_from_url(&proxy_auth, url.buf);
strbuf_release(&url);
}
if (!proxy_auth.host)
die("Invalid proxy URL '%s'", curl_http_proxy);
curl_easy_setopt(result, CURLOPT_PROXY, proxy_auth.host);
var_override(&curl_no_proxy, getenv("NO_PROXY"));
var_override(&curl_no_proxy, getenv("no_proxy"));
curl_easy_setopt(result, CURLOPT_NOPROXY, curl_no_proxy);
}
init_curl_proxy_auth(result);
set_curl_keepalive(result);
return result;
}
static void set_from_env(const char **var, const char *envname)
{
const char *val = getenv(envname);
if (val)
*var = val;
}
void http_init(struct remote *remote, const char *url, int proactive_auth)
{
char *low_speed_limit;
char *low_speed_time;
char *normalized_url;
struct urlmatch_config config = URLMATCH_CONFIG_INIT;
config.section = "http";
config.key = NULL;
config.collect_fn = http_options;
config.cascade_fn = git_default_config;
config.cb = NULL;
http_is_verbose = 0;
normalized_url = url_normalize(url, &config.url);
git_config(urlmatch_config_entry, &config);
free(normalized_url);
string_list_clear(&config.vars, 1);
#ifdef GIT_CURL_HAVE_CURLSSLSET_NO_BACKENDS
if (http_ssl_backend) {
const curl_ssl_backend **backends;
struct strbuf buf = STRBUF_INIT;
int i;
switch (curl_global_sslset(-1, http_ssl_backend, &backends)) {
case CURLSSLSET_UNKNOWN_BACKEND:
strbuf_addf(&buf, _("Unsupported SSL backend '%s'. "
"Supported SSL backends:"),
http_ssl_backend);
for (i = 0; backends[i]; i++)
strbuf_addf(&buf, "\n\t%s", backends[i]->name);
die("%s", buf.buf);
case CURLSSLSET_NO_BACKENDS:
die(_("Could not set SSL backend to '%s': "
"cURL was built without SSL backends"),
http_ssl_backend);
case CURLSSLSET_TOO_LATE:
die(_("Could not set SSL backend to '%s': already set"),
http_ssl_backend);
case CURLSSLSET_OK:
break; /* Okay! */
}
}
#endif
if (curl_global_init(CURL_GLOBAL_ALL) != CURLE_OK)
die("curl_global_init failed");
http_proactive_auth = proactive_auth;
if (remote && remote->http_proxy)
curl_http_proxy = xstrdup(remote->http_proxy);
if (remote)
var_override(&http_proxy_authmethod, remote->http_proxy_authmethod);
pragma_header = curl_slist_append(http_copy_default_headers(),
"Pragma: no-cache");
no_pragma_header = curl_slist_append(http_copy_default_headers(),
"Pragma:");
{
char *http_max_requests = getenv("GIT_HTTP_MAX_REQUESTS");
if (http_max_requests)
max_requests = atoi(http_max_requests);
}
curlm = curl_multi_init();
if (!curlm)
die("curl_multi_init failed");
if (getenv("GIT_SSL_NO_VERIFY"))
curl_ssl_verify = 0;
set_from_env(&ssl_cert, "GIT_SSL_CERT");
set_from_env(&ssl_cert_type, "GIT_SSL_CERT_TYPE");
set_from_env(&ssl_key, "GIT_SSL_KEY");
set_from_env(&ssl_key_type, "GIT_SSL_KEY_TYPE");
set_from_env(&ssl_capath, "GIT_SSL_CAPATH");
set_from_env(&ssl_cainfo, "GIT_SSL_CAINFO");
set_from_env(&user_agent, "GIT_HTTP_USER_AGENT");
low_speed_limit = getenv("GIT_HTTP_LOW_SPEED_LIMIT");
if (low_speed_limit)
curl_low_speed_limit = strtol(low_speed_limit, NULL, 10);
low_speed_time = getenv("GIT_HTTP_LOW_SPEED_TIME");
if (low_speed_time)
curl_low_speed_time = strtol(low_speed_time, NULL, 10);
if (curl_ssl_verify == -1)
curl_ssl_verify = 1;
curl_session_count = 0;
if (max_requests < 1)
max_requests = DEFAULT_MAX_REQUESTS;
set_from_env(&http_proxy_ssl_cert, "GIT_PROXY_SSL_CERT");
set_from_env(&http_proxy_ssl_key, "GIT_PROXY_SSL_KEY");
set_from_env(&http_proxy_ssl_ca_info, "GIT_PROXY_SSL_CAINFO");
if (getenv("GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED"))
proxy_ssl_cert_password_required = 1;
if (getenv("GIT_CURL_FTP_NO_EPSV"))
curl_ftp_no_epsv = 1;
if (url) {
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 18:31:21 +08:00
credential_from_url(&http_auth, url);
if (!ssl_cert_password_required &&
getenv("GIT_SSL_CERT_PASSWORD_PROTECTED") &&
starts_with(url, "https://"))
ssl_cert_password_required = 1;
}
curl_default = get_curl_handle();
}
void http_cleanup(void)
{
struct active_request_slot *slot = active_queue_head;
while (slot != NULL) {
struct active_request_slot *next = slot->next;
if (slot->curl) {
xmulti_remove_handle(slot);
curl_easy_cleanup(slot->curl);
}
free(slot);
slot = next;
}
active_queue_head = NULL;
curl_easy_cleanup(curl_default);
curl_multi_cleanup(curlm);
curl_global_cleanup();
string_list_clear(&extra_http_headers, 0);
curl_slist_free_all(pragma_header);
pragma_header = NULL;
curl_slist_free_all(no_pragma_header);
no_pragma_header = NULL;
curl_slist_free_all(host_resolutions);
host_resolutions = NULL;
if (curl_http_proxy) {
free((void *)curl_http_proxy);
curl_http_proxy = NULL;
}
if (proxy_auth.password) {
memset(proxy_auth.password, 0, strlen(proxy_auth.password));
FREE_AND_NULL(proxy_auth.password);
}
free((void *)curl_proxyuserpwd);
curl_proxyuserpwd = NULL;
free((void *)http_proxy_authmethod);
http_proxy_authmethod = NULL;
if (cert_auth.password) {
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 18:31:21 +08:00
memset(cert_auth.password, 0, strlen(cert_auth.password));
FREE_AND_NULL(cert_auth.password);
}
ssl_cert_password_required = 0;
if (proxy_cert_auth.password) {
memset(proxy_cert_auth.password, 0, strlen(proxy_cert_auth.password));
FREE_AND_NULL(proxy_cert_auth.password);
}
proxy_ssl_cert_password_required = 0;
FREE_AND_NULL(cached_accept_language);
}
struct active_request_slot *get_active_slot(void)
{
struct active_request_slot *slot = active_queue_head;
struct active_request_slot *newslot;
int num_transfers;
/* Wait for a slot to open up if the queue is full */
while (active_requests >= max_requests) {
curl_multi_perform(curlm, &num_transfers);
if (num_transfers < active_requests)
process_curl_messages();
}
while (slot != NULL && slot->in_use)
slot = slot->next;
if (!slot) {
newslot = xmalloc(sizeof(*newslot));
newslot->curl = NULL;
newslot->in_use = 0;
newslot->next = NULL;
slot = active_queue_head;
if (!slot) {
active_queue_head = newslot;
} else {
while (slot->next != NULL)
slot = slot->next;
slot->next = newslot;
}
slot = newslot;
}
if (!slot->curl) {
slot->curl = curl_easy_duphandle(curl_default);
curl_session_count++;
}
active_requests++;
slot->in_use = 1;
slot->results = NULL;
slot->finished = NULL;
slot->callback_data = NULL;
slot->callback_func = NULL;
curl_easy_setopt(slot->curl, CURLOPT_COOKIEFILE, curl_cookie_file);
if (curl_save_cookies)
curl_easy_setopt(slot->curl, CURLOPT_COOKIEJAR, curl_cookie_file);
curl_easy_setopt(slot->curl, CURLOPT_HTTPHEADER, pragma_header);
curl_easy_setopt(slot->curl, CURLOPT_RESOLVE, host_resolutions);
curl_easy_setopt(slot->curl, CURLOPT_ERRORBUFFER, curl_errorstr);
curl_easy_setopt(slot->curl, CURLOPT_CUSTOMREQUEST, NULL);
curl_easy_setopt(slot->curl, CURLOPT_READFUNCTION, NULL);
curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION, NULL);
curl_easy_setopt(slot->curl, CURLOPT_POSTFIELDS, NULL);
curl_easy_setopt(slot->curl, CURLOPT_UPLOAD, 0);
curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1);
http: set curl FAILONERROR each time we select a handle Because we reuse curl handles for multiple requests, the setup of a handle happens in two stages: stable, global setup and per-request setup. The lifecycle of a handle is something like: 1. get_curl_handle; do basic global setup that will last through the whole program (e.g., setting the user agent, ssl options, etc) 2. get_active_slot; set up a per-request baseline (e.g., clearing the read/write functions, making it a GET request, etc) 3. perform the request with curl_*_perform functions 4. goto step 2 to perform another request Breaking it down this way means we can avoid doing global setup from step (1) repeatedly, but we still finish step (2) with a predictable baseline setup that callers can rely on. Until commit 6d052d7 (http: add HTTP_KEEP_ERROR option, 2013-04-05), setting curl's FAILONERROR option was a global setup; we never changed it. However, 6d052d7 introduced an option where some requests might turn off FAILONERROR. Later requests using the same handle would have the option unexpectedly turned off, which meant they would not notice http failures at all. This could easily be seen in the test-suite for the "half-auth" cases of t5541 and t5551. The initial requests turned off FAILONERROR, which meant it was erroneously off for the rpc POST. That worked fine for a successful request, but meant that we failed to react properly to the HTTP 401 (instead, we treated whatever the server handed us as a successful message body). The solution is simple: now that FAILONERROR is a per-request setting, we move it to get_active_slot to make sure it is reset for each request. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-16 08:30:38 +08:00
curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 1);
curl_easy_setopt(slot->curl, CURLOPT_RANGE, NULL);
http: make redirects more obvious We instruct curl to always follow HTTP redirects. This is convenient, but it creates opportunities for malicious servers to create confusing situations. For instance, imagine Alice is a git user with access to a private repository on Bob's server. Mallory runs her own server and wants to access objects from Bob's repository. Mallory may try a few tricks that involve asking Alice to clone from her, build on top, and then push the result: 1. Mallory may simply redirect all fetch requests to Bob's server. Git will transparently follow those redirects and fetch Bob's history, which Alice may believe she got from Mallory. The subsequent push seems like it is just feeding Mallory back her own objects, but is actually leaking Bob's objects. There is nothing in git's output to indicate that Bob's repository was involved at all. The downside (for Mallory) of this attack is that Alice will have received Bob's entire repository, and is likely to notice that when building on top of it. 2. If Mallory happens to know the sha1 of some object X in Bob's repository, she can instead build her own history that references that object. She then runs a dumb http server, and Alice's client will fetch each object individually. When it asks for X, Mallory redirects her to Bob's server. The end result is that Alice obtains objects from Bob, but they may be buried deep in history. Alice is less likely to notice. Both of these attacks are fairly hard to pull off. There's a social component in getting Mallory to convince Alice to work with her. Alice may be prompted for credentials in accessing Bob's repository (but not always, if she is using a credential helper that caches). Attack (1) requires a certain amount of obliviousness on Alice's part while making a new commit. Attack (2) requires that Mallory knows a sha1 in Bob's repository, that Bob's server supports dumb http, and that the object in question is loose on Bob's server. But we can probably make things a bit more obvious without any loss of functionality. This patch does two things to that end. First, when we encounter a whole-repo redirect during the initial ref discovery, we now inform the user on stderr, making attack (1) much more obvious. Second, the decision to follow redirects is now configurable. The truly paranoid can set the new http.followRedirects to false to avoid any redirection entirely. But for a more practical default, we will disallow redirects only after the initial ref discovery. This is enough to thwart attacks similar to (2), while still allowing the common use of redirects at the repository level. Since c93c92f30 (http: update base URLs when we see redirects, 2013-09-28) we re-root all further requests from the redirect destination, which should generally mean that no further redirection is necessary. As an escape hatch, in case there really is a server that needs to redirect individual requests, the user can set http.followRedirects to "true" (and this can be done on a per-server basis via http.*.followRedirects config). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 02:24:41 +08:00
/*
* Default following to off unless "ALWAYS" is configured; this gives
* callers a sane starting point, and they can tweak for individual
* HTTP_FOLLOW_* cases themselves.
*/
if (http_follow_config == HTTP_FOLLOW_ALWAYS)
curl_easy_setopt(slot->curl, CURLOPT_FOLLOWLOCATION, 1);
else
curl_easy_setopt(slot->curl, CURLOPT_FOLLOWLOCATION, 0);
curl_easy_setopt(slot->curl, CURLOPT_IPRESOLVE, git_curl_ipresolve);
curl_easy_setopt(slot->curl, CURLOPT_HTTPAUTH, http_auth_methods);
if (http_auth.password || curl_empty_auth_enabled())
init_curl_http_auth(slot->curl);
return slot;
}
int start_active_slot(struct active_request_slot *slot)
{
CURLMcode curlm_result = curl_multi_add_handle(curlm, slot->curl);
int num_transfers;
if (curlm_result != CURLM_OK &&
curlm_result != CURLM_CALL_MULTI_PERFORM) {
warning("curl_multi_add_handle failed: %s",
curl_multi_strerror(curlm_result));
active_requests--;
slot->in_use = 0;
return 0;
}
/*
* We know there must be something to do, since we just added
* something.
*/
curl_multi_perform(curlm, &num_transfers);
return 1;
}
struct fill_chain {
void *data;
int (*fill)(void *);
struct fill_chain *next;
};
static struct fill_chain *fill_cfg;
void add_fill_function(void *data, int (*fill)(void *))
{
struct fill_chain *new_fill = xmalloc(sizeof(*new_fill));
struct fill_chain **linkp = &fill_cfg;
new_fill->data = data;
new_fill->fill = fill;
new_fill->next = NULL;
while (*linkp)
linkp = &(*linkp)->next;
*linkp = new_fill;
}
void fill_active_slots(void)
{
struct active_request_slot *slot = active_queue_head;
while (active_requests < max_requests) {
struct fill_chain *fill;
for (fill = fill_cfg; fill; fill = fill->next)
if (fill->fill(fill->data))
break;
if (!fill)
break;
}
while (slot != NULL) {
if (!slot->in_use && slot->curl != NULL
&& curl_session_count > min_curl_sessions) {
curl_easy_cleanup(slot->curl);
slot->curl = NULL;
curl_session_count--;
}
slot = slot->next;
}
}
void step_active_slots(void)
{
int num_transfers;
CURLMcode curlm_result;
do {
curlm_result = curl_multi_perform(curlm, &num_transfers);
} while (curlm_result == CURLM_CALL_MULTI_PERFORM);
if (num_transfers < active_requests) {
process_curl_messages();
fill_active_slots();
}
}
void run_active_slot(struct active_request_slot *slot)
{
fd_set readfds;
fd_set writefds;
fd_set excfds;
int max_fd;
struct timeval select_timeout;
int finished = 0;
slot->finished = &finished;
while (!finished) {
step_active_slots();
if (slot->in_use) {
long curl_timeout;
curl_multi_timeout(curlm, &curl_timeout);
if (curl_timeout == 0) {
continue;
} else if (curl_timeout == -1) {
select_timeout.tv_sec = 0;
select_timeout.tv_usec = 50000;
} else {
select_timeout.tv_sec = curl_timeout / 1000;
select_timeout.tv_usec = (curl_timeout % 1000) * 1000;
}
max_fd = -1;
FD_ZERO(&readfds);
FD_ZERO(&writefds);
FD_ZERO(&excfds);
curl_multi_fdset(curlm, &readfds, &writefds, &excfds, &max_fd);
/*
* It can happen that curl_multi_timeout returns a pathologically
* long timeout when curl_multi_fdset returns no file descriptors
* to read. See commit message for more details.
*/
if (max_fd < 0 &&
(select_timeout.tv_sec > 0 ||
select_timeout.tv_usec > 50000)) {
select_timeout.tv_sec = 0;
select_timeout.tv_usec = 50000;
}
select(max_fd+1, &readfds, &writefds, &excfds, &select_timeout);
}
}
http.c: clear the 'finished' member once we are done with it In http.c, the run_active_slot() function allows the given "slot" to make progress by calling step_active_slots() in a loop repeatedly, and the loop is not left until the request held in the slot completes. Ages ago, we used to use the slot->in_use member to get out of the loop, which misbehaved when the request in "slot" completes (at which time, the result of the request is copied away from the slot, and the in_use member is cleared, making the slot ready to be reused), and the "slot" gets reused to service a different request (at which time, the "slot" becomes in_use again, even though it is for a different request). The loop terminating condition mistakenly thought that the original request has yet to be completed. Today's code, after baa7b67d (HTTP slot reuse fixes, 2006-03-10) fixed this issue, uses a separate "slot->finished" member that is set in run_active_slot() to point to an on-stack variable, and the code that completes the request in finish_active_slot() clears the on-stack variable via the pointer to signal that the particular request held by the slot has completed. It also clears the in_use member (as before that fix), so that the slot itself can safely be reused for an unrelated request. One thing that is not quite clean in this arrangement is that, unless the slot gets reused, at which point the finished member is reset to NULL, the member keeps the value of &finished, which becomes a dangling pointer into the stack when run_active_slot() returns. Clear the finished member before the control leaves the function, which has a side effect of unconfusing compilers like recent GCC 12 that is over-eager to warn against such an assignment. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-05-27 03:37:31 +08:00
/*
* The value of slot->finished we set before the loop was used
* to set our "finished" variable when our request completed.
*
* 1. The slot may not have been reused for another requst
* yet, in which case it still has &finished.
*
* 2. The slot may already be in-use to serve another request,
* which can further be divided into two cases:
*
* (a) If call run_active_slot() hasn't been called for that
* other request, slot->finished would have been cleared
* by get_active_slot() and has NULL.
*
* (b) If the request did call run_active_slot(), then the
* call would have updated slot->finished at the beginning
* of this function, and with the clearing of the member
* below, we would find that slot->finished is now NULL.
*
* In all cases, slot->finished has no useful information to
* anybody at this point. Some compilers warn us for
* attempting to smuggle a pointer that is about to become
* invalid, i.e. &finished. We clear it here to assure them.
*/
slot->finished = NULL;
}
static void release_active_slot(struct active_request_slot *slot)
{
closedown_active_slot(slot);
if (slot->curl) {
xmulti_remove_handle(slot);
if (curl_session_count > min_curl_sessions) {
curl_easy_cleanup(slot->curl);
slot->curl = NULL;
curl_session_count--;
}
}
fill_active_slots();
}
void finish_all_active_slots(void)
{
struct active_request_slot *slot = active_queue_head;
while (slot != NULL)
if (slot->in_use) {
run_active_slot(slot);
slot = active_queue_head;
} else {
slot = slot->next;
}
}
/* Helpers for modifying and creating URLs */
static inline int needs_quote(int ch)
{
if (((ch >= 'A') && (ch <= 'Z'))
|| ((ch >= 'a') && (ch <= 'z'))
|| ((ch >= '0') && (ch <= '9'))
|| (ch == '/')
|| (ch == '-')
|| (ch == '.'))
return 0;
return 1;
}
static char *quote_ref_url(const char *base, const char *ref)
{
struct strbuf buf = STRBUF_INIT;
const char *cp;
int ch;
end_url_with_slash(&buf, base);
for (cp = ref; (ch = *cp) != 0; cp++)
if (needs_quote(ch))
strbuf_addf(&buf, "%%%02x", ch);
else
strbuf_addch(&buf, *cp);
return strbuf_detach(&buf, NULL);
}
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
void append_remote_object_url(struct strbuf *buf, const char *url,
const char *hex,
int only_two_digit_prefix)
{
end_url_with_slash(buf, url);
strbuf_addf(buf, "objects/%.*s/", 2, hex);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
if (!only_two_digit_prefix)
strbuf_addstr(buf, hex + 2);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
}
char *get_remote_object_url(const char *url, const char *hex,
int only_two_digit_prefix)
{
struct strbuf buf = STRBUF_INIT;
append_remote_object_url(&buf, url, hex, only_two_digit_prefix);
return strbuf_detach(&buf, NULL);
}
void normalize_curl_result(CURLcode *result, long http_code,
char *errorstr, size_t errorlen)
{
/*
* If we see a failing http code with CURLE_OK, we have turned off
* FAILONERROR (to keep the server's custom error response), and should
* translate the code into failure here.
http: make redirects more obvious We instruct curl to always follow HTTP redirects. This is convenient, but it creates opportunities for malicious servers to create confusing situations. For instance, imagine Alice is a git user with access to a private repository on Bob's server. Mallory runs her own server and wants to access objects from Bob's repository. Mallory may try a few tricks that involve asking Alice to clone from her, build on top, and then push the result: 1. Mallory may simply redirect all fetch requests to Bob's server. Git will transparently follow those redirects and fetch Bob's history, which Alice may believe she got from Mallory. The subsequent push seems like it is just feeding Mallory back her own objects, but is actually leaking Bob's objects. There is nothing in git's output to indicate that Bob's repository was involved at all. The downside (for Mallory) of this attack is that Alice will have received Bob's entire repository, and is likely to notice that when building on top of it. 2. If Mallory happens to know the sha1 of some object X in Bob's repository, she can instead build her own history that references that object. She then runs a dumb http server, and Alice's client will fetch each object individually. When it asks for X, Mallory redirects her to Bob's server. The end result is that Alice obtains objects from Bob, but they may be buried deep in history. Alice is less likely to notice. Both of these attacks are fairly hard to pull off. There's a social component in getting Mallory to convince Alice to work with her. Alice may be prompted for credentials in accessing Bob's repository (but not always, if she is using a credential helper that caches). Attack (1) requires a certain amount of obliviousness on Alice's part while making a new commit. Attack (2) requires that Mallory knows a sha1 in Bob's repository, that Bob's server supports dumb http, and that the object in question is loose on Bob's server. But we can probably make things a bit more obvious without any loss of functionality. This patch does two things to that end. First, when we encounter a whole-repo redirect during the initial ref discovery, we now inform the user on stderr, making attack (1) much more obvious. Second, the decision to follow redirects is now configurable. The truly paranoid can set the new http.followRedirects to false to avoid any redirection entirely. But for a more practical default, we will disallow redirects only after the initial ref discovery. This is enough to thwart attacks similar to (2), while still allowing the common use of redirects at the repository level. Since c93c92f30 (http: update base URLs when we see redirects, 2013-09-28) we re-root all further requests from the redirect destination, which should generally mean that no further redirection is necessary. As an escape hatch, in case there really is a server that needs to redirect individual requests, the user can set http.followRedirects to "true" (and this can be done on a per-server basis via http.*.followRedirects config). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 02:24:41 +08:00
*
* Likewise, if we see a redirect (30x code), that means we turned off
* redirect-following, and we should treat the result as an error.
*/
if (*result == CURLE_OK && http_code >= 300) {
*result = CURLE_HTTP_RETURNED_ERROR;
/*
* Normally curl will already have put the "reason phrase"
* from the server into curl_errorstr; unfortunately without
* FAILONERROR it is lost, so we can give only the numeric
* status code.
*/
xsnprintf(errorstr, errorlen,
"The requested URL returned error: %ld",
http_code);
}
}
static int handle_curl_result(struct slot_results *results)
{
normalize_curl_result(&results->curl_result, results->http_code,
curl_errorstr, sizeof(curl_errorstr));
if (results->curl_result == CURLE_OK) {
credential_approve(&http_auth);
credential_approve(&proxy_auth);
credential_approve(&cert_auth);
return HTTP_OK;
} else if (results->curl_result == CURLE_SSL_CERTPROBLEM) {
/*
* We can't tell from here whether it's a bad path, bad
* certificate, bad password, or something else wrong
* with the certificate. So we reject the credential to
* avoid caching or saving a bad password.
*/
credential_reject(&cert_auth);
return HTTP_NOAUTH;
#ifdef GIT_CURL_HAVE_CURLE_SSL_PINNEDPUBKEYNOTMATCH
} else if (results->curl_result == CURLE_SSL_PINNEDPUBKEYNOTMATCH) {
return HTTP_NOMATCHPUBLICKEY;
#endif
} else if (missing_target(results))
return HTTP_MISSING_TARGET;
else if (results->http_code == 401) {
if (http_auth.username && http_auth.password) {
credential_reject(&http_auth);
return HTTP_NOAUTH;
} else {
http_auth_methods &= ~CURLAUTH_GSSNEGOTIATE;
if (results->auth_avail) {
http_auth_methods &= results->auth_avail;
http_auth_methods_restricted = 1;
}
return HTTP_REAUTH;
}
} else {
if (results->http_connectcode == 407)
credential_reject(&proxy_auth);
if (!curl_errorstr[0])
strlcpy(curl_errorstr,
curl_easy_strerror(results->curl_result),
sizeof(curl_errorstr));
return HTTP_ERROR;
}
}
http: never use curl_easy_perform We currently don't reuse http connections when fetching via the smart-http protocol. This is bad because the TCP handshake introduces latency, and especially because SSL connection setup may be non-trivial. We can fix it by consistently using curl's "multi" interface. The reason is rather complicated: Our http code has two ways of being used: queuing many "slots" to be fetched in parallel, or fetching a single request in a blocking manner. The parallel code is built on curl's "multi" interface. Most of the single-request code uses http_request, which is built on top of the parallel code (we just feed it one slot, and wait until it finishes). However, one could also accomplish the single-request scheme by avoiding curl's multi interface entirely and just using curl_easy_perform. This is simpler, and is used by post_rpc in the smart-http protocol. It does work to use the same curl handle in both contexts, as long as it is not at the same time. However, internally curl may not share all of the cached resources between both contexts. In particular, a connection formed using the "multi" code will go into a reuse pool connected to the "multi" object. Further requests using the "easy" interface will not be able to reuse that connection. The smart http protocol does ref discovery via http_request, which uses the "multi" interface, and then follows up with the "easy" interface for its rpc calls. As a result, we make two HTTP connections rather than reusing a single one. We could teach the ref discovery to use the "easy" interface. But it is only once we have done this discovery that we know whether the protocol will be smart or dumb. If it is dumb, then our further requests, which want to fetch objects in parallel, will not be able to reuse the same connection. Instead, this patch switches post_rpc to build on the parallel interface, which means that we use it consistently everywhere. It's a little more complicated to use, but since we have the infrastructure already, it doesn't add any code; we can just factor out the relevant bits from http_request. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18 18:34:20 +08:00
int run_one_slot(struct active_request_slot *slot,
struct slot_results *results)
{
slot->results = results;
if (!start_active_slot(slot)) {
xsnprintf(curl_errorstr, sizeof(curl_errorstr),
"failed to start HTTP request");
http: never use curl_easy_perform We currently don't reuse http connections when fetching via the smart-http protocol. This is bad because the TCP handshake introduces latency, and especially because SSL connection setup may be non-trivial. We can fix it by consistently using curl's "multi" interface. The reason is rather complicated: Our http code has two ways of being used: queuing many "slots" to be fetched in parallel, or fetching a single request in a blocking manner. The parallel code is built on curl's "multi" interface. Most of the single-request code uses http_request, which is built on top of the parallel code (we just feed it one slot, and wait until it finishes). However, one could also accomplish the single-request scheme by avoiding curl's multi interface entirely and just using curl_easy_perform. This is simpler, and is used by post_rpc in the smart-http protocol. It does work to use the same curl handle in both contexts, as long as it is not at the same time. However, internally curl may not share all of the cached resources between both contexts. In particular, a connection formed using the "multi" code will go into a reuse pool connected to the "multi" object. Further requests using the "easy" interface will not be able to reuse that connection. The smart http protocol does ref discovery via http_request, which uses the "multi" interface, and then follows up with the "easy" interface for its rpc calls. As a result, we make two HTTP connections rather than reusing a single one. We could teach the ref discovery to use the "easy" interface. But it is only once we have done this discovery that we know whether the protocol will be smart or dumb. If it is dumb, then our further requests, which want to fetch objects in parallel, will not be able to reuse the same connection. Instead, this patch switches post_rpc to build on the parallel interface, which means that we use it consistently everywhere. It's a little more complicated to use, but since we have the infrastructure already, it doesn't add any code; we can just factor out the relevant bits from http_request. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18 18:34:20 +08:00
return HTTP_START_FAILED;
}
run_active_slot(slot);
return handle_curl_result(results);
}
struct curl_slist *http_copy_default_headers(void)
{
struct curl_slist *headers = NULL;
const struct string_list_item *item;
for_each_string_list_item(item, &extra_http_headers)
headers = curl_slist_append(headers, item->string);
return headers;
}
static CURLcode curlinfo_strbuf(CURL *curl, CURLINFO info, struct strbuf *buf)
{
char *ptr;
CURLcode ret;
strbuf_reset(buf);
ret = curl_easy_getinfo(curl, info, &ptr);
if (!ret && ptr)
strbuf_addstr(buf, ptr);
return ret;
}
/*
* Check for and extract a content-type parameter. "raw"
* should be positioned at the start of the potential
* parameter, with any whitespace already removed.
*
* "name" is the name of the parameter. The value is appended
* to "out".
*/
static int extract_param(const char *raw, const char *name,
struct strbuf *out)
{
size_t len = strlen(name);
if (strncasecmp(raw, name, len))
return -1;
raw += len;
if (*raw != '=')
return -1;
raw++;
while (*raw && !isspace(*raw) && *raw != ';')
strbuf_addch(out, *raw++);
return 0;
}
/*
* Extract a normalized version of the content type, with any
* spaces suppressed, all letters lowercased, and no trailing ";"
* or parameters.
*
* Note that we will silently remove even invalid whitespace. For
* example, "text / plain" is specifically forbidden by RFC 2616,
* but "text/plain" is the only reasonable output, and this keeps
* our code simple.
*
* If the "charset" argument is not NULL, store the value of any
* charset parameter there.
*
* Example:
* "TEXT/PLAIN; charset=utf-8" -> "text/plain", "utf-8"
* "text / plain" -> "text/plain"
*/
static void extract_content_type(struct strbuf *raw, struct strbuf *type,
struct strbuf *charset)
{
const char *p;
strbuf_reset(type);
strbuf_grow(type, raw->len);
for (p = raw->buf; *p; p++) {
if (isspace(*p))
continue;
if (*p == ';') {
p++;
break;
}
strbuf_addch(type, tolower(*p));
}
if (!charset)
return;
strbuf_reset(charset);
while (*p) {
while (isspace(*p) || *p == ';')
p++;
if (!extract_param(p, "charset", charset))
return;
while (*p && !isspace(*p))
p++;
}
if (!charset->len && starts_with(type->buf, "text/"))
strbuf_addstr(charset, "ISO-8859-1");
}
static void write_accept_language(struct strbuf *buf)
{
/*
* MAX_DECIMAL_PLACES must not be larger than 3. If it is larger than
* that, q-value will be smaller than 0.001, the minimum q-value the
* HTTP specification allows. See
* https://datatracker.ietf.org/doc/html/rfc7231#section-5.3.1 for q-value.
*/
const int MAX_DECIMAL_PLACES = 3;
const int MAX_LANGUAGE_TAGS = 1000;
const int MAX_ACCEPT_LANGUAGE_HEADER_SIZE = 4000;
char **language_tags = NULL;
int num_langs = 0;
const char *s = get_preferred_languages();
int i;
struct strbuf tag = STRBUF_INIT;
/* Don't add Accept-Language header if no language is preferred. */
if (!s)
return;
/*
* Split the colon-separated string of preferred languages into
* language_tags array.
*/
do {
/* collect language tag */
for (; *s && (isalnum(*s) || *s == '_'); s++)
strbuf_addch(&tag, *s == '_' ? '-' : *s);
/* skip .codeset, @modifier and any other unnecessary parts */
while (*s && *s != ':')
s++;
if (tag.len) {
num_langs++;
REALLOC_ARRAY(language_tags, num_langs);
language_tags[num_langs - 1] = strbuf_detach(&tag, NULL);
if (num_langs >= MAX_LANGUAGE_TAGS - 1) /* -1 for '*' */
break;
}
} while (*s++);
/* write Accept-Language header into buf */
if (num_langs) {
int last_buf_len = 0;
int max_q;
int decimal_places;
char q_format[32];
/* add '*' */
REALLOC_ARRAY(language_tags, num_langs + 1);
language_tags[num_langs++] = "*"; /* it's OK; this won't be freed */
/* compute decimal_places */
for (max_q = 1, decimal_places = 0;
max_q < num_langs && decimal_places <= MAX_DECIMAL_PLACES;
decimal_places++, max_q *= 10)
;
xsnprintf(q_format, sizeof(q_format), ";q=0.%%0%dd", decimal_places);
strbuf_addstr(buf, "Accept-Language: ");
for (i = 0; i < num_langs; i++) {
if (i > 0)
strbuf_addstr(buf, ", ");
strbuf_addstr(buf, language_tags[i]);
if (i > 0)
strbuf_addf(buf, q_format, max_q - i);
if (buf->len > MAX_ACCEPT_LANGUAGE_HEADER_SIZE) {
strbuf_remove(buf, last_buf_len, buf->len - last_buf_len);
break;
}
last_buf_len = buf->len;
}
}
/* free language tags -- last one is a static '*' */
for (i = 0; i < num_langs - 1; i++)
free(language_tags[i]);
free(language_tags);
}
/*
* Get an Accept-Language header which indicates user's preferred languages.
*
* Examples:
* LANGUAGE= -> ""
* LANGUAGE=ko:en -> "Accept-Language: ko, en; q=0.9, *; q=0.1"
* LANGUAGE=ko_KR.UTF-8:sr@latin -> "Accept-Language: ko-KR, sr; q=0.9, *; q=0.1"
* LANGUAGE=ko LANG=en_US.UTF-8 -> "Accept-Language: ko, *; q=0.1"
* LANGUAGE= LANG=en_US.UTF-8 -> "Accept-Language: en-US, *; q=0.1"
* LANGUAGE= LANG=C -> ""
*/
const char *http_get_accept_language_header(void)
{
if (!cached_accept_language) {
struct strbuf buf = STRBUF_INIT;
write_accept_language(&buf);
if (buf.len > 0)
cached_accept_language = strbuf_detach(&buf, NULL);
}
return cached_accept_language;
}
static void http_opt_request_remainder(CURL *curl, off_t pos)
{
char buf[128];
xsnprintf(buf, sizeof(buf), "%"PRIuMAX"-", (uintmax_t)pos);
curl_easy_setopt(curl, CURLOPT_RANGE, buf);
}
/* http_request() targets */
#define HTTP_REQUEST_STRBUF 0
#define HTTP_REQUEST_FILE 1
static int http_request(const char *url,
void *result, int target,
const struct http_get_options *options)
{
struct active_request_slot *slot;
struct slot_results results;
struct curl_slist *headers = http_copy_default_headers();
struct strbuf buf = STRBUF_INIT;
const char *accept_language;
int ret;
slot = get_active_slot();
curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1);
if (!result) {
curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 1);
} else {
curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 0);
curl_easy_setopt(slot->curl, CURLOPT_WRITEDATA, result);
if (target == HTTP_REQUEST_FILE) {
off_t posn = ftello(result);
curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION,
fwrite);
if (posn > 0)
http_opt_request_remainder(slot->curl, posn);
} else
curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION,
fwrite_buffer);
}
curl_easy_setopt(slot->curl, CURLOPT_HEADERFUNCTION, fwrite_wwwauth);
accept_language = http_get_accept_language_header();
if (accept_language)
headers = curl_slist_append(headers, accept_language);
strbuf_addstr(&buf, "Pragma:");
if (options && options->no_cache)
strbuf_addstr(&buf, " no-cache");
http: make redirects more obvious We instruct curl to always follow HTTP redirects. This is convenient, but it creates opportunities for malicious servers to create confusing situations. For instance, imagine Alice is a git user with access to a private repository on Bob's server. Mallory runs her own server and wants to access objects from Bob's repository. Mallory may try a few tricks that involve asking Alice to clone from her, build on top, and then push the result: 1. Mallory may simply redirect all fetch requests to Bob's server. Git will transparently follow those redirects and fetch Bob's history, which Alice may believe she got from Mallory. The subsequent push seems like it is just feeding Mallory back her own objects, but is actually leaking Bob's objects. There is nothing in git's output to indicate that Bob's repository was involved at all. The downside (for Mallory) of this attack is that Alice will have received Bob's entire repository, and is likely to notice that when building on top of it. 2. If Mallory happens to know the sha1 of some object X in Bob's repository, she can instead build her own history that references that object. She then runs a dumb http server, and Alice's client will fetch each object individually. When it asks for X, Mallory redirects her to Bob's server. The end result is that Alice obtains objects from Bob, but they may be buried deep in history. Alice is less likely to notice. Both of these attacks are fairly hard to pull off. There's a social component in getting Mallory to convince Alice to work with her. Alice may be prompted for credentials in accessing Bob's repository (but not always, if she is using a credential helper that caches). Attack (1) requires a certain amount of obliviousness on Alice's part while making a new commit. Attack (2) requires that Mallory knows a sha1 in Bob's repository, that Bob's server supports dumb http, and that the object in question is loose on Bob's server. But we can probably make things a bit more obvious without any loss of functionality. This patch does two things to that end. First, when we encounter a whole-repo redirect during the initial ref discovery, we now inform the user on stderr, making attack (1) much more obvious. Second, the decision to follow redirects is now configurable. The truly paranoid can set the new http.followRedirects to false to avoid any redirection entirely. But for a more practical default, we will disallow redirects only after the initial ref discovery. This is enough to thwart attacks similar to (2), while still allowing the common use of redirects at the repository level. Since c93c92f30 (http: update base URLs when we see redirects, 2013-09-28) we re-root all further requests from the redirect destination, which should generally mean that no further redirection is necessary. As an escape hatch, in case there really is a server that needs to redirect individual requests, the user can set http.followRedirects to "true" (and this can be done on a per-server basis via http.*.followRedirects config). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 02:24:41 +08:00
if (options && options->initial_request &&
http_follow_config == HTTP_FOLLOW_INITIAL)
curl_easy_setopt(slot->curl, CURLOPT_FOLLOWLOCATION, 1);
headers = curl_slist_append(headers, buf.buf);
/* Add additional headers here */
if (options && options->extra_headers) {
const struct string_list_item *item;
for_each_string_list_item(item, options->extra_headers) {
headers = curl_slist_append(headers, item->string);
}
}
curl_easy_setopt(slot->curl, CURLOPT_URL, url);
curl_easy_setopt(slot->curl, CURLOPT_HTTPHEADER, headers);
curl_easy_setopt(slot->curl, CURLOPT_ENCODING, "");
curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 0);
http: never use curl_easy_perform We currently don't reuse http connections when fetching via the smart-http protocol. This is bad because the TCP handshake introduces latency, and especially because SSL connection setup may be non-trivial. We can fix it by consistently using curl's "multi" interface. The reason is rather complicated: Our http code has two ways of being used: queuing many "slots" to be fetched in parallel, or fetching a single request in a blocking manner. The parallel code is built on curl's "multi" interface. Most of the single-request code uses http_request, which is built on top of the parallel code (we just feed it one slot, and wait until it finishes). However, one could also accomplish the single-request scheme by avoiding curl's multi interface entirely and just using curl_easy_perform. This is simpler, and is used by post_rpc in the smart-http protocol. It does work to use the same curl handle in both contexts, as long as it is not at the same time. However, internally curl may not share all of the cached resources between both contexts. In particular, a connection formed using the "multi" code will go into a reuse pool connected to the "multi" object. Further requests using the "easy" interface will not be able to reuse that connection. The smart http protocol does ref discovery via http_request, which uses the "multi" interface, and then follows up with the "easy" interface for its rpc calls. As a result, we make two HTTP connections rather than reusing a single one. We could teach the ref discovery to use the "easy" interface. But it is only once we have done this discovery that we know whether the protocol will be smart or dumb. If it is dumb, then our further requests, which want to fetch objects in parallel, will not be able to reuse the same connection. Instead, this patch switches post_rpc to build on the parallel interface, which means that we use it consistently everywhere. It's a little more complicated to use, but since we have the infrastructure already, it doesn't add any code; we can just factor out the relevant bits from http_request. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18 18:34:20 +08:00
ret = run_one_slot(slot, &results);
if (options && options->content_type) {
struct strbuf raw = STRBUF_INIT;
curlinfo_strbuf(slot->curl, CURLINFO_CONTENT_TYPE, &raw);
extract_content_type(&raw, options->content_type,
options->charset);
strbuf_release(&raw);
}
if (options && options->effective_url)
curlinfo_strbuf(slot->curl, CURLINFO_EFFECTIVE_URL,
options->effective_url);
curl_slist_free_all(headers);
strbuf_release(&buf);
return ret;
}
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:34:05 +08:00
/*
* Update the "base" url to a more appropriate value, as deduced by
* redirects seen when requesting a URL starting with "url".
*
* The "asked" parameter is a URL that we asked curl to access, and must begin
* with "base".
*
* The "got" parameter is the URL that curl reported to us as where we ended
* up.
*
* Returns 1 if we updated the base url, 0 otherwise.
*
* Our basic strategy is to compare "base" and "asked" to find the bits
* specific to our request. We then strip those bits off of "got" to yield the
* new base. So for example, if our base is "http://example.com/foo.git",
* and we ask for "http://example.com/foo.git/info/refs", we might end up
* with "https://other.example.com/foo.git/info/refs". We would want the
* new URL to become "https://other.example.com/foo.git".
*
* Note that this assumes a sane redirect scheme. It's entirely possible
* in the example above to end up at a URL that does not even end in
http: always update the base URL for redirects If a malicious server redirects the initial ref advertisement, it may be able to leak sha1s from other, unrelated servers that the client has access to. For example, imagine that Alice is a git user, she has access to a private repository on a server hosted by Bob, and Mallory runs a malicious server and wants to find out about Bob's private repository. Mallory asks Alice to clone an unrelated repository from her over HTTP. When Alice's client contacts Mallory's server for the initial ref advertisement, the server issues an HTTP redirect for Bob's server. Alice contacts Bob's server and gets the ref advertisement for the private repository. If there is anything to fetch, she then follows up by asking the server for one or more sha1 objects. But who is the server? If it is still Mallory's server, then Alice will leak the existence of those sha1s to her. Since commit c93c92f30 (http: update base URLs when we see redirects, 2013-09-28), the client usually rewrites the base URL such that all further requests will go to Bob's server. But this is done by textually matching the URL. If we were originally looking for "http://mallory/repo.git/info/refs", and we got pointed at "http://bob/other.git/info/refs", then we know that the right root is "http://bob/other.git". If the redirect appears to change more than just the root, we punt and continue to use the original server. E.g., imagine the redirect adds a URL component that Bob's server will ignore, like "http://bob/other.git/info/refs?dummy=1". We can solve this by aborting in this case rather than silently continuing to use Mallory's server. In addition to protecting from sha1 leakage, it's arguably safer and more sane to refuse a confusing redirect like that in general. For example, part of the motivation in c93c92f30 is avoiding accidentally sending credentials over clear http, just to get a response that says "try again over https". So even in a non-malicious case, we'd prefer to err on the side of caution. The downside is that it's possible this will break a legitimate but complicated server-side redirection scheme. The setup given in the newly added test does work, but it's convoluted enough that we don't need to care about it. A more plausible case would be a server which redirects a request for "info/refs?service=git-upload-pack" to just "info/refs" (because it does not do smart HTTP, and for some reason really dislikes query parameters). Right now we would transparently downgrade to dumb-http, but with this patch, we'd complain (and the user would have to set GIT_SMART_HTTP=0 to fetch). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 02:24:35 +08:00
* "info/refs". In such a case we die. There's not much we can do, such a
* scheme is unlikely to represent a real git repository, and failing to
* rewrite the base opens options for malicious redirects to do funny things.
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:34:05 +08:00
*/
static int update_url_from_redirect(struct strbuf *base,
const char *asked,
const struct strbuf *got)
{
const char *tail;
size_t new_len;
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:34:05 +08:00
if (!strcmp(asked, got->buf))
return 0;
if (!skip_prefix(asked, base->buf, &tail))
BUG("update_url_from_redirect: %s is not a superset of %s",
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:34:05 +08:00
asked, base->buf);
new_len = got->len;
if (!strip_suffix_mem(got->buf, &new_len, tail))
http: always update the base URL for redirects If a malicious server redirects the initial ref advertisement, it may be able to leak sha1s from other, unrelated servers that the client has access to. For example, imagine that Alice is a git user, she has access to a private repository on a server hosted by Bob, and Mallory runs a malicious server and wants to find out about Bob's private repository. Mallory asks Alice to clone an unrelated repository from her over HTTP. When Alice's client contacts Mallory's server for the initial ref advertisement, the server issues an HTTP redirect for Bob's server. Alice contacts Bob's server and gets the ref advertisement for the private repository. If there is anything to fetch, she then follows up by asking the server for one or more sha1 objects. But who is the server? If it is still Mallory's server, then Alice will leak the existence of those sha1s to her. Since commit c93c92f30 (http: update base URLs when we see redirects, 2013-09-28), the client usually rewrites the base URL such that all further requests will go to Bob's server. But this is done by textually matching the URL. If we were originally looking for "http://mallory/repo.git/info/refs", and we got pointed at "http://bob/other.git/info/refs", then we know that the right root is "http://bob/other.git". If the redirect appears to change more than just the root, we punt and continue to use the original server. E.g., imagine the redirect adds a URL component that Bob's server will ignore, like "http://bob/other.git/info/refs?dummy=1". We can solve this by aborting in this case rather than silently continuing to use Mallory's server. In addition to protecting from sha1 leakage, it's arguably safer and more sane to refuse a confusing redirect like that in general. For example, part of the motivation in c93c92f30 is avoiding accidentally sending credentials over clear http, just to get a response that says "try again over https". So even in a non-malicious case, we'd prefer to err on the side of caution. The downside is that it's possible this will break a legitimate but complicated server-side redirection scheme. The setup given in the newly added test does work, but it's convoluted enough that we don't need to care about it. A more plausible case would be a server which redirects a request for "info/refs?service=git-upload-pack" to just "info/refs" (because it does not do smart HTTP, and for some reason really dislikes query parameters). Right now we would transparently downgrade to dumb-http, but with this patch, we'd complain (and the user would have to set GIT_SMART_HTTP=0 to fetch). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 02:24:35 +08:00
die(_("unable to update url base from redirection:\n"
" asked for: %s\n"
" redirect: %s"),
asked, got->buf);
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:34:05 +08:00
strbuf_reset(base);
strbuf_add(base, got->buf, new_len);
http: always update the base URL for redirects If a malicious server redirects the initial ref advertisement, it may be able to leak sha1s from other, unrelated servers that the client has access to. For example, imagine that Alice is a git user, she has access to a private repository on a server hosted by Bob, and Mallory runs a malicious server and wants to find out about Bob's private repository. Mallory asks Alice to clone an unrelated repository from her over HTTP. When Alice's client contacts Mallory's server for the initial ref advertisement, the server issues an HTTP redirect for Bob's server. Alice contacts Bob's server and gets the ref advertisement for the private repository. If there is anything to fetch, she then follows up by asking the server for one or more sha1 objects. But who is the server? If it is still Mallory's server, then Alice will leak the existence of those sha1s to her. Since commit c93c92f30 (http: update base URLs when we see redirects, 2013-09-28), the client usually rewrites the base URL such that all further requests will go to Bob's server. But this is done by textually matching the URL. If we were originally looking for "http://mallory/repo.git/info/refs", and we got pointed at "http://bob/other.git/info/refs", then we know that the right root is "http://bob/other.git". If the redirect appears to change more than just the root, we punt and continue to use the original server. E.g., imagine the redirect adds a URL component that Bob's server will ignore, like "http://bob/other.git/info/refs?dummy=1". We can solve this by aborting in this case rather than silently continuing to use Mallory's server. In addition to protecting from sha1 leakage, it's arguably safer and more sane to refuse a confusing redirect like that in general. For example, part of the motivation in c93c92f30 is avoiding accidentally sending credentials over clear http, just to get a response that says "try again over https". So even in a non-malicious case, we'd prefer to err on the side of caution. The downside is that it's possible this will break a legitimate but complicated server-side redirection scheme. The setup given in the newly added test does work, but it's convoluted enough that we don't need to care about it. A more plausible case would be a server which redirects a request for "info/refs?service=git-upload-pack" to just "info/refs" (because it does not do smart HTTP, and for some reason really dislikes query parameters). Right now we would transparently downgrade to dumb-http, but with this patch, we'd complain (and the user would have to set GIT_SMART_HTTP=0 to fetch). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-07 02:24:35 +08:00
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:34:05 +08:00
return 1;
}
static int http_request_reauth(const char *url,
void *result, int target,
struct http_get_options *options)
{
int ret = http_request(url, result, target, options);
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:34:05 +08:00
http: attempt updating base URL only if no error http.c supports HTTP redirects of the form http://foo/info/refs?service=git-upload-pack -> http://anything -> http://bar/info/refs?service=git-upload-pack (that is to say, as long as the Git part of the path and the query string is preserved in the final redirect destination, the intermediate steps can have any URL). However, if one of the intermediate steps results in an HTTP exception, a confusing "unable to update url base from redirection" message is printed instead of a Curl error message with the HTTP exception code. This was introduced by 2 commits. Commit c93c92f ("http: update base URLs when we see redirects", 2013-09-28) introduced a best-effort optimization that required checking if only the "base" part of the URL differed between the initial request and the final redirect destination, but it performed the check before any HTTP status checking was done. If something went wrong, the normal code path was still followed, so this did not cause any confusing error messages until commit 6628eb4 ("http: always update the base URL for redirects", 2016-12-06), which taught http to die if the non-"base" part of the URL differed. Therefore, teach http to check the HTTP status before attempting to check if only the "base" part of the URL differed. This commit teaches http_request_reauth to return early without updating options->base_url upon an error; the only invoker of this function that passes a non-NULL "options" is remote-curl.c (through "http_get_strbuf"), which only uses options->base_url for an informational message in the situations that this commit cares about (that is, when the return value is not HTTP_OK). The included test checks that the redirect scheme at the beginning of this commit message works, and that returning a 502 in the middle of the redirect scheme produces the correct result. Note that this is different from the test in commit 6628eb4 ("http: always update the base URL for redirects", 2016-12-06) in that this commit tests that a Git-shaped URL (http://.../info/refs?service=git-upload-pack) works, whereas commit 6628eb4 tests that a non-Git-shaped URL (http://.../info/refs/foo?service=git-upload-pack) does not work (even though Git is processing that URL) and is an error that is fatal, not silently swallowed. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-28 10:53:11 +08:00
if (ret != HTTP_OK && ret != HTTP_REAUTH)
return ret;
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:34:05 +08:00
if (options && options->effective_url && options->base_url) {
if (update_url_from_redirect(options->base_url,
url, options->effective_url)) {
credential_from_url(&http_auth, options->base_url->buf);
url = options->effective_url->buf;
}
}
if (ret != HTTP_REAUTH)
return ret;
/*
* The previous request may have put cruft into our output stream; we
* should clear it out before making our next request.
*/
switch (target) {
case HTTP_REQUEST_STRBUF:
strbuf_reset(result);
break;
case HTTP_REQUEST_FILE:
if (fflush(result)) {
error_errno("unable to flush a file");
return HTTP_START_FAILED;
}
rewind(result);
if (ftruncate(fileno(result), 0) < 0) {
error_errno("unable to truncate a file");
return HTTP_START_FAILED;
}
break;
default:
BUG("Unknown http_request target");
}
http: hoist credential request out of handle_curl_result When we are handling a curl response code in http_request or in the remote-curl RPC code, we use the handle_curl_result helper to translate curl's response into an easy-to-use code. When we see an HTTP 401, we do one of two things: 1. If we already had a filled-in credential, we mark it as rejected, and then return HTTP_NOAUTH to indicate to the caller that we failed. 2. If we didn't, then we ask for a new credential and tell the caller HTTP_REAUTH to indicate that they may want to try again. Rejecting in the first case makes sense; it is the natural result of the request we just made. However, prompting for more credentials in the second step does not always make sense. We do not know for sure that the caller is going to make a second request, and nor are we sure that it will be to the same URL. Logically, the prompt belongs not to the request we just finished, but to the request we are (maybe) about to make. In practice, it is very hard to trigger any bad behavior. Currently, if we make a second request, it will always be to the same URL (even in the face of redirects, because curl handles the redirects internally). And we almost always retry on HTTP_REAUTH these days. The one exception is if we are streaming a large RPC request to the server (e.g., a pushed packfile), in which case we cannot restart. It's extremely unlikely to see a 401 response at this stage, though, as we would typically have seen it when we sent a probe request, before streaming the data. This patch drops the automatic prompt out of case 2, and instead requires the caller to do it. This is a few extra lines of code, and the bug it fixes is unlikely to come up in practice. But it is conceptually cleaner, and paves the way for better handling of credentials across redirects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 16:31:45 +08:00
credential_fill(&http_auth);
return http_request(url, result, target, options);
}
int http_get_strbuf(const char *url,
struct strbuf *result,
struct http_get_options *options)
{
return http_request_reauth(url, result, HTTP_REQUEST_STRBUF, options);
}
/*
* Downloads a URL and stores the result in the given file.
*
* If a previous interrupted download is detected (i.e. a previous temporary
* file is still around) the download is resumed.
*/
int http_get_file(const char *url, const char *filename,
struct http_get_options *options)
{
int ret;
struct strbuf tmpfile = STRBUF_INIT;
FILE *result;
strbuf_addf(&tmpfile, "%s.temp", filename);
result = fopen(tmpfile.buf, "a");
if (!result) {
error("Unable to open local file %s", tmpfile.buf);
ret = HTTP_ERROR;
goto cleanup;
}
ret = http_request_reauth(url, result, HTTP_REQUEST_FILE, options);
fclose(result);
if (ret == HTTP_OK && finalize_object_file(tmpfile.buf, filename))
ret = HTTP_ERROR;
cleanup:
strbuf_release(&tmpfile);
return ret;
}
int http_fetch_ref(const char *base, struct ref *ref)
{
struct http_get_options options = {0};
char *url;
struct strbuf buffer = STRBUF_INIT;
int ret = -1;
options.no_cache = 1;
url = quote_ref_url(base, ref->name);
if (http_get_strbuf(url, &buffer, &options) == HTTP_OK) {
strbuf_rtrim(&buffer);
if (buffer.len == the_hash_algo->hexsz)
ret = get_oid_hex(buffer.buf, &ref->old_oid);
else if (starts_with(buffer.buf, "ref: ")) {
ref->symref = xstrdup(buffer.buf + 5);
ret = 0;
}
}
strbuf_release(&buffer);
free(url);
return ret;
}
/* Helpers for fetching packs */
static char *fetch_pack_index(unsigned char *hash, const char *base_url)
{
char *url, *tmp;
struct strbuf buf = STRBUF_INIT;
if (http_is_verbose)
fprintf(stderr, "Getting index for pack %s\n", hash_to_hex(hash));
end_url_with_slash(&buf, base_url);
strbuf_addf(&buf, "objects/pack/pack-%s.idx", hash_to_hex(hash));
url = strbuf_detach(&buf, NULL);
strbuf_addf(&buf, "%s.temp", sha1_pack_index_name(hash));
tmp = strbuf_detach(&buf, NULL);
if (http_get_file(url, tmp, NULL) != HTTP_OK) {
error("Unable to get pack index %s", url);
FREE_AND_NULL(tmp);
}
free(url);
return tmp;
}
static int fetch_and_setup_pack_index(struct packed_git **packs_head,
unsigned char *sha1, const char *base_url)
{
struct packed_git *new_pack;
char *tmp_idx = NULL;
int ret;
if (has_pack_index(sha1)) {
new_pack = parse_pack_index(sha1, sha1_pack_index_name(sha1));
if (!new_pack)
return -1; /* parse_pack_index() already issued error message */
goto add_pack;
}
tmp_idx = fetch_pack_index(sha1, base_url);
if (!tmp_idx)
return -1;
new_pack = parse_pack_index(sha1, tmp_idx);
if (!new_pack) {
unlink(tmp_idx);
free(tmp_idx);
return -1; /* parse_pack_index() already issued error message */
}
ret = verify_pack_index(new_pack);
if (!ret) {
close_pack_index(new_pack);
ret = finalize_object_file(tmp_idx, sha1_pack_index_name(sha1));
}
free(tmp_idx);
if (ret)
return -1;
add_pack:
new_pack->next = *packs_head;
*packs_head = new_pack;
return 0;
}
int http_get_info_packs(const char *base_url, struct packed_git **packs_head)
{
struct http_get_options options = {0};
int ret = 0;
char *url;
const char *data;
struct strbuf buf = STRBUF_INIT;
struct object_id oid;
end_url_with_slash(&buf, base_url);
strbuf_addstr(&buf, "objects/info/packs");
url = strbuf_detach(&buf, NULL);
options.no_cache = 1;
ret = http_get_strbuf(url, &buf, &options);
if (ret != HTTP_OK)
goto cleanup;
data = buf.buf;
while (*data) {
if (skip_prefix(data, "P pack-", &data) &&
!parse_oid_hex(data, &oid, &data) &&
skip_prefix(data, ".pack", &data) &&
(*data == '\n' || *data == '\0')) {
fetch_and_setup_pack_index(packs_head, oid.hash, base_url);
} else {
data = strchrnul(data, '\n');
}
if (*data)
data++; /* skip past newline */
}
cleanup:
free(url);
return ret;
}
void release_http_pack_request(struct http_pack_request *preq)
{
if (preq->packfile) {
fclose(preq->packfile);
preq->packfile = NULL;
}
preq->slot = NULL;
strbuf_release(&preq->tmpfile);
free(preq->url);
free(preq);
}
static const char *default_index_pack_args[] =
{"index-pack", "--stdin", NULL};
int finish_http_pack_request(struct http_pack_request *preq)
{
struct child_process ip = CHILD_PROCESS_INIT;
int tmpfile_fd;
int ret = 0;
fclose(preq->packfile);
preq->packfile = NULL;
tmpfile_fd = xopen(preq->tmpfile.buf, O_RDONLY);
ip.git_cmd = 1;
ip.in = tmpfile_fd;
strvec_pushv(&ip.args, preq->index_pack_args ?
preq->index_pack_args :
default_index_pack_args);
if (preq->preserve_index_pack_stdout)
ip.out = 0;
else
ip.no_stdout = 1;
if (run_command(&ip)) {
ret = -1;
goto cleanup;
}
cleanup:
close(tmpfile_fd);
unlink(preq->tmpfile.buf);
return ret;
}
void http_install_packfile(struct packed_git *p,
struct packed_git **list_to_remove_from)
{
struct packed_git **lst = list_to_remove_from;
while (*lst != p)
lst = &((*lst)->next);
*lst = (*lst)->next;
install_packed_git(the_repository, p);
}
struct http_pack_request *new_http_pack_request(
const unsigned char *packed_git_hash, const char *base_url) {
struct strbuf buf = STRBUF_INIT;
end_url_with_slash(&buf, base_url);
strbuf_addf(&buf, "objects/pack/pack-%s.pack",
hash_to_hex(packed_git_hash));
return new_direct_http_pack_request(packed_git_hash,
strbuf_detach(&buf, NULL));
}
struct http_pack_request *new_direct_http_pack_request(
const unsigned char *packed_git_hash, char *url)
{
off_t prev_posn = 0;
struct http_pack_request *preq;
CALLOC_ARRAY(preq, 1);
strbuf_init(&preq->tmpfile, 0);
preq->url = url;
strbuf_addf(&preq->tmpfile, "%s.temp", sha1_pack_name(packed_git_hash));
preq->packfile = fopen(preq->tmpfile.buf, "a");
if (!preq->packfile) {
error("Unable to open local file %s for pack",
preq->tmpfile.buf);
goto abort;
}
preq->slot = get_active_slot();
curl_easy_setopt(preq->slot->curl, CURLOPT_WRITEDATA, preq->packfile);
curl_easy_setopt(preq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite);
curl_easy_setopt(preq->slot->curl, CURLOPT_URL, preq->url);
curl_easy_setopt(preq->slot->curl, CURLOPT_HTTPHEADER,
no_pragma_header);
/*
* If there is data present from a previous transfer attempt,
* resume where it left off
*/
prev_posn = ftello(preq->packfile);
if (prev_posn>0) {
if (http_is_verbose)
fprintf(stderr,
"Resuming fetch of pack %s at byte %"PRIuMAX"\n",
hash_to_hex(packed_git_hash),
(uintmax_t)prev_posn);
http_opt_request_remainder(preq->slot->curl, prev_posn);
}
return preq;
abort:
strbuf_release(&preq->tmpfile);
free(preq->url);
free(preq);
return NULL;
}
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
/* Helpers for fetching objects (loose) */
static size_t fwrite_sha1_file(char *ptr, size_t eltsize, size_t nmemb,
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
void *data)
{
unsigned char expn[4096];
size_t size = eltsize * nmemb;
int posn = 0;
struct http_object_request *freq = data;
struct active_request_slot *slot = freq->slot;
if (slot) {
CURLcode c = curl_easy_getinfo(slot->curl, CURLINFO_HTTP_CODE,
&slot->http_code);
if (c != CURLE_OK)
BUG("curl_easy_getinfo for HTTP code failed: %s",
curl_easy_strerror(c));
if (slot->http_code >= 300)
return nmemb;
}
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
do {
ssize_t retval = xwrite(freq->localfile,
(char *) ptr + posn, size - posn);
if (retval < 0)
return posn / eltsize;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
posn += retval;
} while (posn < size);
freq->stream.avail_in = size;
freq->stream.next_in = (void *)ptr;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
do {
freq->stream.next_out = expn;
freq->stream.avail_out = sizeof(expn);
freq->zret = git_inflate(&freq->stream, Z_SYNC_FLUSH);
the_hash_algo->update_fn(&freq->c, expn,
sizeof(expn) - freq->stream.avail_out);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
} while (freq->stream.avail_in && freq->zret == Z_OK);
return nmemb;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
}
struct http_object_request *new_http_object_request(const char *base_url,
const struct object_id *oid)
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
{
char *hex = oid_to_hex(oid);
struct strbuf filename = STRBUF_INIT;
struct strbuf prevfile = STRBUF_INIT;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
int prevlocal;
char prev_buf[PREV_BUF_SIZE];
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
ssize_t prev_read = 0;
off_t prev_posn = 0;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
struct http_object_request *freq;
CALLOC_ARRAY(freq, 1);
strbuf_init(&freq->tmpfile, 0);
oidcpy(&freq->oid, oid);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
freq->localfile = -1;
loose_object_path(the_repository, &filename, oid);
strbuf_addf(&freq->tmpfile, "%s.temp", filename.buf);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
strbuf_addf(&prevfile, "%s.prev", filename.buf);
unlink_or_warn(prevfile.buf);
rename(freq->tmpfile.buf, prevfile.buf);
unlink_or_warn(freq->tmpfile.buf);
strbuf_release(&filename);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
if (freq->localfile != -1)
error("fd leakage in start: %d", freq->localfile);
freq->localfile = open(freq->tmpfile.buf,
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
O_WRONLY | O_CREAT | O_EXCL, 0666);
/*
* This could have failed due to the "lazy directory creation";
* try to mkdir the last path component.
*/
if (freq->localfile < 0 && errno == ENOENT) {
char *dir = strrchr(freq->tmpfile.buf, '/');
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
if (dir) {
*dir = 0;
mkdir(freq->tmpfile.buf, 0777);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
*dir = '/';
}
freq->localfile = open(freq->tmpfile.buf,
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
O_WRONLY | O_CREAT | O_EXCL, 0666);
}
if (freq->localfile < 0) {
error_errno("Couldn't create temporary file %s",
freq->tmpfile.buf);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
goto abort;
}
git_inflate_init(&freq->stream);
the_hash_algo->init_fn(&freq->c);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
freq->url = get_remote_object_url(base_url, hex, 0);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
/*
* If a previous temp file is present, process what was already
* fetched.
*/
prevlocal = open(prevfile.buf, O_RDONLY);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
if (prevlocal != -1) {
do {
prev_read = xread(prevlocal, prev_buf, PREV_BUF_SIZE);
if (prev_read>0) {
if (fwrite_sha1_file(prev_buf,
1,
prev_read,
freq) == prev_read) {
prev_posn += prev_read;
} else {
prev_read = -1;
}
}
} while (prev_read > 0);
close(prevlocal);
}
unlink_or_warn(prevfile.buf);
strbuf_release(&prevfile);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
/*
* Reset inflate/SHA1 if there was an error reading the previous temp
* file; also rewind to the beginning of the local file.
*/
if (prev_read == -1) {
memset(&freq->stream, 0, sizeof(freq->stream));
git_inflate_init(&freq->stream);
the_hash_algo->init_fn(&freq->c);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
if (prev_posn>0) {
prev_posn = 0;
lseek(freq->localfile, 0, SEEK_SET);
if (ftruncate(freq->localfile, 0) < 0) {
error_errno("Couldn't truncate temporary file %s",
freq->tmpfile.buf);
goto abort;
}
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
}
}
freq->slot = get_active_slot();
curl_easy_setopt(freq->slot->curl, CURLOPT_WRITEDATA, freq);
curl_easy_setopt(freq->slot->curl, CURLOPT_FAILONERROR, 0);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
curl_easy_setopt(freq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite_sha1_file);
curl_easy_setopt(freq->slot->curl, CURLOPT_ERRORBUFFER, freq->errorstr);
curl_easy_setopt(freq->slot->curl, CURLOPT_URL, freq->url);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
curl_easy_setopt(freq->slot->curl, CURLOPT_HTTPHEADER, no_pragma_header);
/*
* If we have successfully processed data from a previous fetch
* attempt, only fetch the data we don't already have.
*/
if (prev_posn>0) {
if (http_is_verbose)
fprintf(stderr,
"Resuming fetch of object %s at byte %"PRIuMAX"\n",
hex, (uintmax_t)prev_posn);
http_opt_request_remainder(freq->slot->curl, prev_posn);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
}
return freq;
abort:
strbuf_release(&prevfile);
free(freq->url);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
free(freq);
return NULL;
}
void process_http_object_request(struct http_object_request *freq)
{
if (!freq->slot)
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
return;
freq->curl_result = freq->slot->curl_result;
freq->http_code = freq->slot->http_code;
freq->slot = NULL;
}
int finish_http_object_request(struct http_object_request *freq)
{
struct stat st;
struct strbuf filename = STRBUF_INIT;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
close(freq->localfile);
freq->localfile = -1;
process_http_object_request(freq);
if (freq->http_code == 416) {
warning("requested range invalid; we may already have all the data.");
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
} else if (freq->curl_result != CURLE_OK) {
if (stat(freq->tmpfile.buf, &st) == 0)
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
if (st.st_size == 0)
unlink_or_warn(freq->tmpfile.buf);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
return -1;
}
git_inflate_end(&freq->stream);
the_hash_algo->final_oid_fn(&freq->real_oid, &freq->c);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
if (freq->zret != Z_STREAM_END) {
unlink_or_warn(freq->tmpfile.buf);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
return -1;
}
if (!oideq(&freq->oid, &freq->real_oid)) {
unlink_or_warn(freq->tmpfile.buf);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
return -1;
}
loose_object_path(the_repository, &filename, &freq->oid);
freq->rename = finalize_object_file(freq->tmpfile.buf, filename.buf);
strbuf_release(&filename);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
return freq->rename;
}
void abort_http_object_request(struct http_object_request *freq)
{
unlink_or_warn(freq->tmpfile.buf);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
release_http_object_request(freq);
}
void release_http_object_request(struct http_object_request *freq)
{
if (freq->localfile != -1) {
close(freq->localfile);
freq->localfile = -1;
}
FREE_AND_NULL(freq->url);
if (freq->slot) {
freq->slot->callback_func = NULL;
freq->slot->callback_data = NULL;
release_active_slot(freq->slot);
freq->slot = NULL;
}
strbuf_release(&freq->tmpfile);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 16:44:02 +08:00
}