git/t/t7501-commit.sh

448 lines
9.9 KiB
Bash
Raw Normal View History

#!/bin/sh
#
# Copyright (c) 2007 Kristian Høgsberg <krh@redhat.com>
#
# FIXME: Test the various index usages, -i and -o, test reflog,
# signoff
test_description='git commit'
. ./test-lib.sh
test_tick
test_expect_success \
"initial status" \
"echo 'bongo bongo' >file &&
git add file"
test_expect_success C_LOCALE_OUTPUT \
"Constructing initial commit" \
"git status | grep 'Initial commit'"
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"fail initial amend" \
"test_must_fail git commit --amend"
test_expect_success \
"initial commit" \
"git commit -m initial"
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"invalid options 1" \
"test_must_fail git commit -m foo -m bar -F file"
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"invalid options 2" \
"test_must_fail git commit -C HEAD -m illegal"
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"using paths with -a" \
"echo King of the bongo >file &&
test_must_fail git commit -m foo -a file"
test_expect_success PERL \
"using paths with --interactive" \
"echo bong-o-bong >file &&
! (echo 7 | git commit -m foo --interactive file)"
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"using invalid commit with -C" \
"test_must_fail git commit -C bogus"
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"testing nothing to commit" \
"test_must_fail git commit -m initial"
test_expect_success \
"next commit" \
"echo 'bongo bongo bongo' >file \
git commit -m next -a"
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"commit message from non-existing file" \
"echo 'more bongo: bongo bongo bongo bongo' >file && \
test_must_fail git commit -F gah -a"
# Empty except stray tabs and spaces on a few lines.
sed -e 's/@$//' >msg <<EOF
@
@
Signed-off-by: hula
EOF
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"empty commit message" \
"test_must_fail git commit -F msg -a"
test_expect_success \
"commit message from file" \
"echo 'this is the commit message, coming from a file' >msg && \
git commit -F msg -a"
cat >editor <<\EOF
#!/bin/sh
sed -e "s/a file/an amend commit/g" < "$1" > "$1-"
mv "$1-" "$1"
EOF
chmod 755 editor
test_expect_success \
"amend commit" \
"EDITOR=./editor git commit --amend"
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 17:50:53 +08:00
test_expect_success \
"passing -m and -F" \
"echo 'enough with the bongos' >file && \
test_must_fail git commit -F msg -m amending ."
test_expect_success \
"using message from other commit" \
"git commit -C HEAD^ ."
cat >editor <<\EOF
#!/bin/sh
sed -e "s/amend/older/g" < "$1" > "$1-"
mv "$1-" "$1"
EOF
chmod 755 editor
test_expect_success \
"editing message from other commit" \
"echo 'hula hula' >file && \
EDITOR=./editor git commit -c HEAD^ -a"
test_expect_success \
"message from stdin" \
"echo 'silly new contents' >file && \
echo commit message from stdin | git commit -F - -a"
test_expect_success \
"overriding author from command line" \
"echo 'gak' >file && \
commit: show interesting ident information in summary There are a few cases of user identity information that we consider interesting: (1) When the author and committer identities do not match. (2) When the committer identity was picked automatically from the username, hostname and GECOS information. In these cases, we already show the information in the commit message template. However, users do not always see that template because they might use "-m" or "-F". With this patch, we show these interesting cases after the commit, along with the subject and change summary. The new output looks like: $ git commit \ -m "federalist papers" \ --author='Publius <alexander@hamilton.com>' [master 3d226a7] federalist papers Author: Publius <alexander@hamilton.com> 1 files changed, 1 insertions(+), 0 deletions(-) for case (1), and: $ git config --global --unset user.name $ git config --global --unset user.email $ git commit -m foo [master 7c2a927] foo Committer: Jeff King <peff@c-71-185-130-222.hsd1.va.comcast.net> Your name and email address were configured automatically based on your username and hostname. Please check that they are accurate. You can suppress this message by setting them explicitly: git config --global user.name Your Name git config --global user.email you@example.com If the identity used for this commit is wrong, you can fix it with: git commit --amend --author='Your Name <you@example.com>' 1 files changed, 1 insertions(+), 0 deletions(-) for case (2). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-14 01:39:51 +08:00
git commit -m 'author' --author 'Rubber Duck <rduck@convoy.org>' -a >output 2>&1"
test_expect_success \
"commit --author output mentions author" \
"grep Rubber.Duck output"
test_expect_success PERL \
"interactive add" \
"echo 7 | git commit --interactive | grep 'What now'"
test_expect_success \
"showing committed revisions" \
"git rev-list HEAD >current"
cat >editor <<\EOF
#!/bin/sh
sed -e "s/good/bad/g" < "$1" > "$1-"
mv "$1-" "$1"
EOF
chmod 755 editor
cat >msg <<EOF
A good commit message.
EOF
test_expect_success \
'editor not invoked if -F is given' '
echo "moo" >file &&
EDITOR=./editor git commit -a -F msg &&
git show -s --pretty=format:"%s" | grep -q good &&
echo "quack" >file &&
echo "Another good message." | EDITOR=./editor git commit -a -F - &&
git show -s --pretty=format:"%s" | grep -q good
'
# We could just check the head sha1, but checking each commit makes it
# easier to isolate bugs.
cat >expected <<\EOF
72c0dc9855b0c9dadcbfd5a31cab072e0cb774ca
9b88fc14ce6b32e3d9ee021531a54f18a5cf38a2
3536bbb352c3a1ef9a420f5b4242d48578b92aa7
d381ac431806e53f3dd7ac2f1ae0534f36d738b9
4fd44095ad6334f3ef72e4c5ec8ddf108174b54a
402702b49136e7587daa9280e91e4bb7cb2179f7
EOF
test_expect_success \
'validate git rev-list output.' \
'test_cmp expected current'
test_expect_success 'partial commit that involves removal (1)' '
git rm --cached file &&
mv file elif &&
git add elif &&
git commit -m "Partial: add elif" elif &&
git diff-tree --name-status HEAD^ HEAD >current &&
echo "A elif" >expected &&
test_cmp expected current
'
test_expect_success 'partial commit that involves removal (2)' '
git commit -m "Partial: remove file" file &&
git diff-tree --name-status HEAD^ HEAD >current &&
echo "D file" >expected &&
test_cmp expected current
'
test_expect_success 'partial commit that involves removal (3)' '
git rm --cached elif &&
echo elif >elif &&
git commit -m "Partial: modify elif" elif &&
git diff-tree --name-status HEAD^ HEAD >current &&
echo "M elif" >expected &&
test_cmp expected current
'
author="The Real Author <someguy@his.email.org>"
test_expect_success 'amend commit to fix author' '
oldtick=$GIT_AUTHOR_DATE &&
test_tick &&
git reset --hard &&
git cat-file -p HEAD |
sed -e "s/author.*/author $author $oldtick/" \
-e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \
expected &&
git commit --amend --author="$author" &&
git cat-file -p HEAD > current &&
test_cmp expected current
'
test_expect_success 'amend commit to fix date' '
test_tick &&
newtick=$GIT_AUTHOR_DATE &&
git reset --hard &&
git cat-file -p HEAD |
sed -e "s/author.*/author $author $newtick/" \
-e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \
expected &&
git commit --amend --date="$newtick" &&
git cat-file -p HEAD > current &&
test_cmp expected current
'
test_expect_success 'commit complains about bogus date' '
test_must_fail git commit --amend --date=10.11.2010
'
test_expect_success 'sign off (1)' '
echo 1 >positive &&
git add positive &&
git commit -s -m "thank you" &&
git cat-file commit HEAD | sed -e "1,/^\$/d" >actual &&
(
echo thank you
echo
git var GIT_COMMITTER_IDENT |
sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /"
) >expected &&
test_cmp expected actual
'
test_expect_success 'sign off (2)' '
echo 2 >positive &&
git add positive &&
existing="Signed-off-by: Watch This <watchthis@example.com>" &&
git commit -s -m "thank you
$existing" &&
git cat-file commit HEAD | sed -e "1,/^\$/d" >actual &&
(
echo thank you
echo
echo $existing
git var GIT_COMMITTER_IDENT |
sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /"
) >expected &&
test_cmp expected actual
'
test_expect_success 'signoff gap' '
echo 3 >positive &&
git add positive &&
alt="Alt-RFC-822-Header: Value" &&
git commit -s -m "welcome
$alt" &&
git cat-file commit HEAD | sed -e "1,/^\$/d" > actual &&
(
echo welcome
echo
echo $alt
git var GIT_COMMITTER_IDENT |
sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /"
) >expected &&
test_cmp expected actual
'
test_expect_success 'signoff gap 2' '
echo 4 >positive &&
git add positive &&
alt="fixed: 34" &&
git commit -s -m "welcome
We have now
$alt" &&
git cat-file commit HEAD | sed -e "1,/^\$/d" > actual &&
(
echo welcome
echo
echo We have now
echo $alt
echo
git var GIT_COMMITTER_IDENT |
sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /"
) >expected &&
test_cmp expected actual
'
test_expect_success 'multiple -m' '
>negative &&
git add negative &&
git commit -m "one" -m "two" -m "three" &&
git cat-file commit HEAD | sed -e "1,/^\$/d" >actual &&
(
echo one
echo
echo two
echo
echo three
) >expected &&
test_cmp expected actual
'
author="The Real Author <someguy@his.email.org>"
test_expect_success 'amend commit to fix author' '
oldtick=$GIT_AUTHOR_DATE &&
test_tick &&
git reset --hard &&
git cat-file -p HEAD |
sed -e "s/author.*/author $author $oldtick/" \
-e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \
expected &&
git commit --amend --author="$author" &&
git cat-file -p HEAD > current &&
test_cmp expected current
'
test_expect_success 'git commit <file> with dirty index' '
echo tacocat > elif &&
echo tehlulz > chz &&
git add chz &&
git commit elif -m "tacocat is a palindrome" &&
git show --stat | grep elif &&
git diff --cached | grep chz
'
test_expect_success 'same tree (single parent)' '
git reset --hard
if git commit -m empty
then
echo oops -- should have complained
false
else
: happy
fi
'
test_expect_success 'same tree (single parent) --allow-empty' '
git commit --allow-empty -m "forced empty" &&
git cat-file commit HEAD | grep forced
'
test_expect_success 'same tree (merge and amend merge)' '
git checkout -b side HEAD^ &&
echo zero >zero &&
git add zero &&
git commit -m "add zero" &&
git checkout master &&
git merge -s ours side -m "empty ok" &&
git diff HEAD^ HEAD >actual &&
: >expected &&
test_cmp expected actual &&
git commit --amend -m "empty really ok" &&
git diff HEAD^ HEAD >actual &&
: >expected &&
test_cmp expected actual
'
test_expect_success 'amend using the message from another commit' '
git reset --hard &&
test_tick &&
git commit --allow-empty -m "old commit" &&
old=$(git rev-parse --verify HEAD) &&
test_tick &&
git commit --allow-empty -m "new commit" &&
new=$(git rev-parse --verify HEAD) &&
test_tick &&
git commit --allow-empty --amend -C "$old" &&
git show --pretty="format:%ad %s" "$old" >expected &&
git show --pretty="format:%ad %s" HEAD >actual &&
test_cmp expected actual
'
test_expect_success 'amend using the message from a commit named with tag' '
git reset --hard &&
test_tick &&
git commit --allow-empty -m "old commit" &&
old=$(git rev-parse --verify HEAD) &&
git tag -a -m "tag on old" tagged-old HEAD &&
test_tick &&
git commit --allow-empty -m "new commit" &&
new=$(git rev-parse --verify HEAD) &&
test_tick &&
git commit --allow-empty --amend -C tagged-old &&
git show --pretty="format:%ad %s" "$old" >expected &&
git show --pretty="format:%ad %s" HEAD >actual &&
test_cmp expected actual
'
test_expect_success 'amend can copy notes' '
git config notes.rewrite.amend true &&
git config notes.rewriteRef "refs/notes/*" &&
test_commit foo &&
git notes add -m"a note" &&
test_tick &&
git commit --amend -m"new foo" &&
test "$(git notes show)" = "a note"
'
test_done