gcc/libssp/configure.ac
Iain Sandoe 6a6d3817af Config,Darwin: Allow for configuring Darwin to use embedded runpath.
Recent Darwin versions place contraints on the use of run paths
specified in environment variables.  This breaks some assumptions
in the GCC build.

This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).

The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.

For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).

During build-time configurations  any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.

Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).

This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.

We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier.  For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).

ChangeLog:

	* configure: Regenerate.
	* configure.ac: Do not add default runpaths to GCC exes
	when we are building -static-libstdc++/-static-libgcc (the
	default).
	* libtool.m4: Add 'enable-darwin-at-runpath'.  Act  on the
	enable flag to alter Darwin libraries to use @rpath names.

gcc/ChangeLog:

	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
	* config/darwin.h: Handle Darwin rpaths.
	* config/darwin.opt: Handle Darwin rpaths.
	* Makefile.in:  Handle Darwin rpaths.

gcc/ada/ChangeLog:

	* gcc-interface/Makefile.in: Handle Darwin rpaths.

gcc/jit/ChangeLog:
	* Make-lang.in: Handle Darwin rpaths.

libatomic/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libbacktrace/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

libgcc/ChangeLog:

	* config/t-slibgcc-darwin: Generate libgcc_s
	with an @rpath name.
	* config.host: Handle Darwin rpaths.

libgfortran/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths

libgm2/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
	* libm2cor/Makefile.am: Handle Darwin rpaths.
	* libm2cor/Makefile.in: Regenerate.
	* libm2iso/Makefile.am: Handle Darwin rpaths.
	* libm2iso/Makefile.in: Regenerate.
	* libm2log/Makefile.am: Handle Darwin rpaths.
	* libm2log/Makefile.in: Regenerate.
	* libm2min/Makefile.am: Handle Darwin rpaths.
	* libm2min/Makefile.in: Regenerate.
	* libm2pim/Makefile.am: Handle Darwin rpaths.
	* libm2pim/Makefile.in: Regenerate.

libgomp/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths

libitm/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libobjc/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libphobos/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
	* libdruntime/Makefile.am: Handle Darwin rpaths.
	* libdruntime/Makefile.in: Regenerate.
	* src/Makefile.am: Handle Darwin rpaths.
	* src/Makefile.in: Regenerate.

libquadmath/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libsanitizer/ChangeLog:

	* asan/Makefile.am: Handle Darwin rpaths.
	* asan/Makefile.in: Regenerate.
	* configure: Regenerate.
	* hwasan/Makefile.am: Handle Darwin rpaths.
	* hwasan/Makefile.in: Regenerate.
	* lsan/Makefile.am: Handle Darwin rpaths.
	* lsan/Makefile.in: Regenerate.
	* tsan/Makefile.am: Handle Darwin rpaths.
	* tsan/Makefile.in: Regenerate.
	* ubsan/Makefile.am: Handle Darwin rpaths.
	* ubsan/Makefile.in: Regenerate.

libssp/ChangeLog:

	* Makefile.am: Handle Darwin rpaths.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
	* src/Makefile.am: Handle Darwin rpaths.
	* src/Makefile.in: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

lto-plugin/ChangeLog:
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.

zlib/ChangeLog:
	* configure: Regenerate.
	* configure.ac: Handle Darwin rpaths.
2023-10-22 19:30:02 +01:00

218 lines
6.1 KiB
Plaintext

# Process this file with autoconf to produce a configure script, like so:
#
# aclocal -I .. -I ../config && autoconf && autoheader && automake
AC_INIT(libssp, 1.0)
AC_CONFIG_SRCDIR(ssp.c)
AC_CANONICAL_SYSTEM
ACX_NONCANONICAL_TARGET
AM_INIT_AUTOMAKE([no-dist])
AC_MSG_CHECKING([for --enable-version-specific-runtime-libs])
AC_ARG_ENABLE(version-specific-runtime-libs,
[ --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory ],
[case "$enableval" in
yes) version_specific_libs=yes ;;
no) version_specific_libs=no ;;
*) AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);;
esac],
[version_specific_libs=no])
AC_MSG_RESULT($version_specific_libs)
AM_MAINTAINER_MODE
GCC_NO_EXECUTABLES
AM_ENABLE_MULTILIB(, ..)
target_alias=${target_alias-$host_alias}
AC_SUBST(target_alias)
AC_CONFIG_HEADERS(config.h)
AC_LANG_C
# The same as in boehm-gc and libstdc++. Have to borrow it from there.
# We must force CC to /not/ be precious variables; otherwise
# the wrong, non-multilib-adjusted value will be used in multilibs.
# As a side effect, we have to subst CFLAGS ourselves.
m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
m4_define([_AC_ARG_VAR_PRECIOUS],[])
AC_PROG_CC
m4_rename_force([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
AC_SUBST(CFLAGS)
if test "x$GCC" != "xyes"; then
AC_MSG_ERROR([libssp must be built with GCC])
fi
AC_PROG_CPP
AC_MSG_CHECKING([whether -fstack-protector works])
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -fstack-protector -Werror"
AC_TRY_COMPILE([
void __attribute__((noinline)) bar (char *x)
{
__builtin_memset (x, 0, 64);
}],[char buf[64]; bar (buf);],
[AC_MSG_RESULT(yes)],
[AC_MSG_RESULT(no)])
CFLAGS="$save_CFLAGS"
# Add CET specific flags if CET is enabled
GCC_CET_FLAGS(CET_FLAGS)
XCFLAGS="$XCFLAGS $CET_FLAGS"
AC_SUBST(XCFLAGS)
AC_MSG_CHECKING([whether hidden visibility is supported])
AC_TRY_COMPILE([
void __attribute__((visibility ("hidden"))) bar (void) {}],,
[ssp_hidden=yes],[ssp_hidden=no])
AC_MSG_RESULT($ssp_hidden)
if test x$ssp_hidden = xyes; then
AC_DEFINE([HAVE_HIDDEN_VISIBILITY],[1],[__attribute__((visibility ("hidden"))) supported])
fi
AC_MSG_CHECKING([whether symbol versioning is supported])
AC_ARG_ENABLE(symvers,
AS_HELP_STRING([--disable-symvers],
[disable symbol versioning for libssp]),
ssp_use_symver=$enableval,
ssp_use_symver=yes)
if test "x$ssp_use_symver" != xno; then
if test x$gcc_no_link = xyes; then
# If we cannot link, we cannot build shared libraries, so do not use
# symbol versioning.
ssp_use_symver=no
else
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS -fPIC -shared -Wl,--version-script,./conftest.map"
cat > conftest.map <<EOF
FOO_1.0 {
global: *foo*; bar; local: *;
};
EOF
AC_TRY_LINK([int foo;],[],[ssp_use_symver=gnu],[ssp_use_symver=no])
if test x$ssp_use_symver = xno; then
case "$target_os" in
solaris2*)
LDFLAGS="$save_LDFLAGS"
LDFLAGS="$LDFLAGS -fPIC -shared -Wl,-M,./conftest.map"
# Sun ld cannot handle wildcards and treats all entries as undefined.
cat > conftest.map <<EOF
FOO_1.0 {
global: foo; local: *;
};
EOF
AC_TRY_LINK([int foo;],[],[ssp_use_symver=sun],[ssp_use_symver=no])
;;
esac
fi
LDFLAGS="$save_LDFLAGS"
fi
fi
AC_MSG_RESULT($ssp_use_symver)
AM_CONDITIONAL(LIBSSP_USE_SYMVER, [test "x$ssp_use_symver" != xno])
AM_CONDITIONAL(LIBSSP_USE_SYMVER_GNU, [test "x$ssp_use_symver" = xgnu])
AM_CONDITIONAL(LIBSSP_USE_SYMVER_SUN, [test "x$ssp_use_symver" = xsun])
AC_CHECK_HEADERS(alloca.h malloc.h paths.h syslog.h string.h unistd.h fcntl.h stdio.h limits.h)
if test x$gcc_no_link = xyes; then
# Presume the ISO C functions are available; add target-specific
# configuration here if required.
AC_DEFINE(HAVE_STRNCPY)
AC_DEFINE(HAVE_STRNCAT)
else
AC_CHECK_FUNCS(memmove mempcpy strncpy strncat)
fi
AC_MSG_CHECKING([whether vsnprintf is usable])
AC_RUN_IFELSE([AC_LANG_PROGRAM([
#include <stdarg.h>
#include <string.h>
#include <stdio.h>
int foo (char *buf, size_t n, const char *fmt, ...)
{
va_list ap;
int ret;
va_start (ap, fmt);
ret = vsnprintf (buf, n, fmt, ap);
va_end (ap);
return ret;
}],
[char buf@<:@8@:>@; memset (buf, 'A', sizeof (buf));
if (foo (buf, 4, ".%s.", "CDEFG") != 7)
return 1;
return memcmp (buf, ".CD\0AAAA", sizeof (buf)) != 0;])],
[ssp_have_usable_vsnprintf=define],
[ssp_have_usable_vsnprintf=undef],
[ssp_have_usable_vsnprintf=undef])
if test "x$ssp_have_usable_vsnprintf" = xdefine; then
AC_MSG_RESULT(yes)
AC_DEFINE([HAVE_USABLE_VSNPRINTF],[1],[vsnprintf is present and works])
else
AC_MSG_RESULT(no)
fi
AC_SUBST(ssp_have_usable_vsnprintf)
AM_PROG_LIBTOOL
ACX_LT_HOST_FLAGS
AC_SUBST(enable_shared)
AC_SUBST(enable_static)
GCC_WITH_TOOLEXECLIBDIR
AM_CONDITIONAL([ENABLE_DARWIN_AT_RPATH], [test x$enable_darwin_at_rpath = xyes])
# Calculate toolexeclibdir
# Also toolexecdir, though it's only used in toolexeclibdir
case ${version_specific_libs} in
yes)
# Need the gcc compiler version to know where to install libraries
# and header files if --enable-version-specific-runtime-libs option
# is selected.
toolexecdir='$(libdir)/gcc/$(target_alias)'
toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
;;
no)
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
# Install a library built with a cross compiler in tooldir, not libdir.
toolexecdir='$(exec_prefix)/$(target_alias)'
case ${with_toolexeclibdir} in
no)
toolexeclibdir='$(toolexecdir)/lib'
;;
*)
toolexeclibdir=${with_toolexeclibdir}
;;
esac
else
toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
toolexeclibdir='$(libdir)'
fi
multi_os_directory=`$CC -print-multi-os-directory`
case $multi_os_directory in
.) ;; # Avoid trailing /.
*) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
esac
;;
esac
AC_SUBST(toolexecdir)
AC_SUBST(toolexeclibdir)
if test ${multilib} = yes; then
multilib_arg="--enable-multilib"
else
multilib_arg=
fi
# Determine what GCC version number to use in filesystem paths.
GCC_BASE_VER
AC_CONFIG_FILES([Makefile ssp/ssp.h])
AC_OUTPUT