There was general agreement last November that we would move to allowing
C++11 features to be used in GCC 11; this patch implements that direction.
ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* configure.ac: Update bootstrap dialect to -std=c++11.
config/ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* ax_cxx_compile_stdcxx.m4: Import from autoconf archive with
an adjustment to try the default mode.
gcc/ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* aclocal.m4: Add ax_cxx_compile_stdcxx.m4.
* configure.ac: Use AX_CXX_COMPILE_STDCXX(11).
Don't perform CET run-time check for host when cross compiling. Instead,
enable CET in cross compiler if possible so that it will run on both CET
and non-CET hosts.
config/
PR bootstrap/94998
* cet.m4 (GCC_CET_HOST_FLAGS): Enable CET in cross compiler if
possible.
libiberty/
PR bootstrap/94998
* configure: Regenerated.
lto-plugin/
PR bootstrap/94998
* configure: Regenerated.
GCC_CET_HOST_FLAGS uses -Wl,-z,ibt,-z,shstk to check if Linux/x86 host
has Intel CET enabled by introducing an Intel CET violation on purpose.
To avoid false positive, check whether -Wl,-z,ibt,-z,shstk works first.
-fcf-protection=none is added to avoid false negative when -fcf-protection
is enabled by default.
config/
PR bootstrap/94739
* cet.m4 (GCC_CET_HOST_FLAGS): Add -fcf-protection=none to
-Wl,-z,ibt,-z,shstk. Check whether -fcf-protection=none
-Wl,-z,ibt,-z,shstk works first.
libiberty/
PR bootstrap/94739
* configure: Regenerated.
lto-plugin/
PR bootstrap/94739
* configure: Regenerated.
Since ld is Intel CET enabled on Intel CET enabled host, dlopen fails on
liblto_plugin.so if it isn't Intel CET enabled. Add GCC_CET_HOST_FLAGS
to cet.m4, use it in libiberty and lto-plugin to always enable Intel
CET in liblto_plugin.so on Intel CET enabled host.
On Linux/x86 host, enable Intel CET by default if assembler and compiler
support Intel CET so that the generated liblto_plugin.so can be used on
both CET and non-CET machines. It is an error to disable Intel CET in
liblto_plugin.so on Intel CET enabled host.
config/
PR bootstrap/94739
* cet.m4 (GCC_CET_HOST_FLAGS): New.
libiberty/
PR bootstrap/94739
* Makefile.in (COMPILE.c): Add @CET_HOST_FLAGS@.
(configure_deps): Add $(srcdir)/../config/cet.m4 and
$(srcdir)/../config/enable.m4.
* aclocal.m4: Include ../config/cet.m4 and ../config/enable.m4.
* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
AC_SUBST(CET_HOST_FLAGS).
* configure: Regenerated.
lto-plugin/
PR bootstrap/94739
* Makefile.am (AM_CFLAGS): Add $(CET_HOST_FLAGS).
* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
AC_SUBST(CET_HOST_FLAGS).
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
The following patch provides some further math library fallbacks.
fmaf can be implemented using fma if available, fma and fmal can use
x * y + z as fallback, it is not perfect, but e.g. glibc on various arches
has been using that as fallback for many years,
and copysign/copysignl/fabs/fabsl can be implemented using corresponding
__builtin_* if we make sure that gcc expands it inline instead of using
a library call (these days it is expanded inline on most targets).
2020-04-22 Jakub Jelinek <jakub@redhat.com>
PR libfortran/94694
PR libfortran/94586
* configure.ac: Add math func checks for fmaf, fma and fmal. Add
HAVE_INLINE_BUILTIN_COPYSIGN check.
* c99_protos.h (copysign, fmaf, fma, fmal): Provide fallback
prototypes.
(HAVE_COPYSIGN, HAVE_FMAF, HAVE_FMA, HAVE_FMAL): Define if not
defined and fallback version is provided.
* intrinsics/c99_functions.c (copysign, fmaf, fma, fmal): Provide
fallback implementations if possible
* configure: Regenerated.
* config.h.in: Regenerated.
* math.m4 (GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK1,
GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK2): New.
On bare-metal targets, I/O support is typically provided by a BSP and
requires a linker script and/or hosting library to be specified on the
linker command line. Linking an empty program with the default linker
script may succeed, however, which confuses libstdc++ configuration
when programs that probe for the presence of various I/O features fail
with link errors.
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
config/
* no-executables.m4: Use a non-empty program to test for linker
support.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libiberty/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++v-3/
* configure: Regenerated.
This commit:
commit e7c26e04b2 (tjteru/master)
Date: Wed Jan 22 14:54:26 2020 +0000
gcc: Add new configure options to allow static libraries to be selected
contains a couple of issues. First I failed to correctly regenerate
all of the configure files it should have done. Second, there was a
mistake in lib-link.m4, one of the conditions didn't use pure sh
syntax, I wrote this:
if x$lib_type = xauto || x$lib_type = xshared; then
When I should have written this:
if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
These issues were raised on the mailing list in these messages:
https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01827.htmlhttps://gcc.gnu.org/ml/gcc-patches/2020-01/msg01921.html
config/ChangeLog:
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
gcc/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libcpp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
The motivation behind this change is to make it easier for a user to
link against static libraries on a target where dynamic libraries are
the default library type (for example GNU/Linux).
Further, my motivation is really for linking libraries into GDB,
however, the binutils-gdb/config/ directory is a copy of gcc/config/
so changes for GDB need to be approved by the GCC project first.
After making this change in the gcc/config/ directory I've run
autoreconf on all of the configure scripts in the GCC tree and a
couple have been updated, so I'll use one of these to describe what my
change does.
Consider libcpp, this library links against libiconv. Currently if
the user builds on a system with both static and dynamic libiconv
installed then autotools will pick up the dynamic libiconv by
default. This is almost certainly the right thing to do.
However, if the user wants to link against static libiconv then things
are a little harder, they could remove the dynamic libiconv from their
system, but this is probably a bad idea (other things might depend on
that library), or the user can build their own version of libiconv,
install it into a unique prefix, and then configure gcc using the
--with-libiconv-prefix=DIR flag. This works fine, but is somewhat
annoying, the static library available, I just can't get autotools to
use it.
My change then adds a new flag --with-libiconv-type=TYPE, where type
is either auto, static, or shared. The default auto, ensures we keep
the existing behaviour unchanged.
If the user configures with --with-libiconv-type=static then the
configure script will ignore any dynamic libiconv it finds, and will
only look for a static libiconv, if no static libiconv is found then
the configure will continue as though there is no libiconv at all
available.
Similarly a user can specify --with-libiconv-type=shared and force the
use of shared libiconv, any static libiconv will be ignored.
As I've implemented this change within the AC_LIB_LINKFLAGS_BODY macro
then only libraries configured using the AC_LIB_LINKFLAGS or
AC_LIB_HAVE_LINKFLAGS macros will gain the new configure flag.
If this is accepted into GCC then there will be follow on patches for
binutils and GDB to regenerate some configure scripts in those
projects.
For GCC only two configure scripts needed updated after this commit,
libcpp and libstdc++-v3, both of which link against libiconv.
config/ChangeLog:
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new
--with-libXXX-type=... option. Use this to guide the selection of
either a shared library or a static library.
libcpp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
Although BOOT_CFLAGS can be used to bootstrap with -Og, having a
dedicated build config is sometimes more convenient.
2019-07-08 Richard Sandiford <richard.sandiford@arm.com>
config/
* bootstrap-Og.mk: New file.
gcc/
* doc/install.texi (bootstrap-Og): Document.
From-SVN: r273193
