_ITM_beginTransaction is a 'returns_twice' function that saves x30
on the stack as part of gtm_jmpbuf (that is passed down to
GTM_begin_transaction), but the saved x30 is also used for return.
The return path should be protected so we don't leave an
ldp x29, x30, [sp]
ret
gadget in the code, so x30 is signed on function entry. This
exposes the signed address in the gtm_jmpbuf too. The jmpbuf does
not need a signed address since GTM_longjmp uses
ldp x29, x30, [x1]
br x30
and with BTI there is a BTI j at the _ITM_beginTransaction call site
where this jump returns. Using PAC does not hurt: the gtm_jmpbuf is
internal to libitm and its layout is only used by sjlj.S so the
signed address does not escape. Saving signed x30 into gtm_jmpbuf
provides a bit of extra protection, but more importantly it allows
adding the PAC-RET support without changing the existing code much.
In theory bti and pac-ret protection can be added unconditionally
since the instructions are in the nop space, in practice they
can cause trouble if some tooling does not understand the gnu
property note (e.g. old binutils) or some unwinder or debugger
does not understand the new dwarf op code used for pac-ret (e.g
old gdb). So the code is written to only support branch-protection
according to the code generation options.
libitm/ChangeLog:
* config/aarch64/sjlj.S: Add conditional pac-ret protection.
sjlj.S did not have the GNU property note markup and the BTI c
instructions that are necessary when it is built with branch
protection.
The notes are only added when libitm is built with branch
protection, because old linkers mishandle the note (merge
them incorrectly or emit warnings), the BTI instructions
are added unconditionally.
2020-07-09 Szabolcs Nagy <szabolcs.nagy@arm.com>
libitm/ChangeLog:
* config/aarch64/sjlj.S: Add BTI marking and related definitions,
and add BTI c to function entries.
sjlj.S only had the note on Linux, but it is supposed
to have it on FreeBSD too.
2020-07-09 Szabolcs Nagy <szabolcs.nagy@arm.com>
libitm/ChangeLog:
* config/aarch64/sjlj.S: Add stack note if __FreeBSD__ is defined.
I discovered that libitm:
(a) declares __cxa_allocate_exception and friends directly,
(b) doesn't mark them as 'throw()'
(c) doesn't mark the replacment fns _ITM_$foo as nothrow either
We happen to get away with it because of code in the compiler that,
although it checks the parameter types, doesn't check the exception
specification. (One reason being they used to not be part of the
language's type system, but now they are.) I suspect this can lead us
to generate pessimal code later, if we've seen one of these decls
earlier. Anyway, with modules it becomes trickier[*], so I'm trying
to clean it up and not be a problem. I see Jakub fixed part of the
problem
(https://gcc.gnu.org/pipermail/gcc-patches/2018-December/513302.html)
AFAICT, he did fix libitm's decls, but left the lax parm-type checking
in the compiler.
libitm.h is not very informative about specification:
in version 1 of http://www.intel.com/some/path/here.pdf. */
Anyway, it was too fiddly to have libitm pick up the declarations from
libsupc++. Besides it makes them weak declarations, and then provides
definitions for non-elf systems. So this patch adds the expected
'throw()'
* libitm/libitm.h (_ITM_NOTHROW): Define.
(_ITM_cxa_allocate_exception, _ITM_cxa_free_exception)
(_ITM_cxa_begin_catch): Use it.
* eh_cpp.cc: Add throw() to __cxa_allocate_exception,
__cxa_free_exception, __cxa_begin_catch, __cxa_tm_cleanup,
__cxa_get_globals.
(_ITM_cxa_allocate_exception, _ITM_cxa_free_exception)
(_ITM_cxa_begin_catch): Likewise.
Diagnostic coloring makes the log file hard to read when there's a
problem. Let's do without it.
* Testsuite/lib/libitm.exp (libitm_init): Add
-fdiagnostics-color=never to options.
On bare-metal targets, I/O support is typically provided by a BSP and
requires a linker script and/or hosting library to be specified on the
linker command line. Linking an empty program with the default linker
script may succeed, however, which confuses libstdc++ configuration
when programs that probe for the presence of various I/O features fail
with link errors.
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
config/
* no-executables.m4: Use a non-empty program to test for linker
support.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libiberty/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++v-3/
* configure: Regenerated.
The ldaddr macro in sjlj.S needs to be updated to support the FDPIC
model.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
libitm/
* config/arm/sjlj.S (ldaddr): Add FDPIC support.
From-SVN: r275584
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
2019-09-03 Chung-Lin Tang <cltang@codesourcery.com>
libatomic/
PR other/79543
* acinclude.m4 (LIBAT_CHECK_LINKER_FEATURES): Fix GNU ld --version
scanning to conform to the GNU Coding Standards.
* configure: Regenerate.
libffi/
PR other/79543
* acinclude.m4 (LIBAT_CHECK_LINKER_FEATURES): Fix GNU ld --version
scanning to conform to the GNU Coding Standards.
* configure: Regenerate.
libgomp/
PR other/79543
* acinclude.m4 (LIBGOMP_CHECK_LINKER_FEATURES): Fix GNU ld --version
scanning to conform to the GNU Coding Standards.
* configure: Regenerate.
libitm/
PR other/79543
* acinclude.m4 (LIBITM_CHECK_LINKER_FEATURES): Fix GNU ld --version
scanning to conform to the GNU Coding Standards.
* configure: Regenerate.
libstdc++-v3/
PR other/79543
* acinclude.m4 (GLIBCXX_CHECK_LINKER_FEATURES): Fix GNU ld --version
scanning to conform to the GNU Coding Standards.
* configure: Regenerate.
From-SVN: r275341
PR c++/88482
* except.c (verify_library_fn): New function.
(declare_library_fn): Use it. Initialize TM even if the non-TM
library function has been user declared.
(do_end_catch): Don't set TREE_NOTHROW on error_mark_node.
(expand_start_catch_block): Don't call initialize_handler_parm
for error_mark_node.
(build_throw): Use verify_library_fn. Initialize TM even if the
non-TM library function has been user declared. Don't crash if
any library fn is error_mark_node.
* g++.dg/eh/builtin5.C: New test.
* g++.dg/eh/builtin6.C: New test.
* g++.dg/eh/builtin7.C: New test.
* g++.dg/eh/builtin8.C: New test.
* g++.dg/eh/builtin9.C: New test.
* g++.dg/eh/builtin10.C: New test.
* g++.dg/eh/builtin11.C: New test.
* g++.dg/parse/crash55.C: Adjust expected diagnostics.
* eh_cpp.cc (__cxa_throw): Change DEST argument type from
void * to void (*) (void *).
(_ITM_cxa_throw): Likewise.
* libitm.h (_ITM_cxa_throw): Likewise.
* libitm.texi (_ITM_cxa_throw): Likewise.
From-SVN: r267179
libitm/
* config/powerpc/target.h (htm_available): Add support for
PPC_FEATURE2_HTM_NO_SUSPEND. Use __builtin_cpu_supports if available.
From-SVN: r267101
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
In glibc, sysdeps/i386/nptl/tls.h has
typedef struct
{
void *tcb; /* Pointer to the TCB. Not necessarily the
thread descriptor used by libpthread. */
dtv_t *dtv;
void *self; /* Pointer to the thread descriptor. */
int multiple_threads;
uintptr_t sysinfo;
uintptr_t stack_guard;
uintptr_t pointer_guard;
int gscope_flag;
int __glibc_reserved1;
/* Reservation of some values for the TM ABI. */
void *__private_tm[4];
/* GCC split stack support. */
void *__private_ss;
} tcbhead_t;
and sysdeps/x86_64/nptl/tls.h has
typedef struct
{
void *tcb; /* Pointer to the TCB. Not necessarily the
thread descriptor used by libpthread. */
dtv_t *dtv;
void *self; /* Pointer to the thread descriptor. */
int multiple_threads;
int gscope_flag;
uintptr_t sysinfo;
uintptr_t stack_guard;
uintptr_t pointer_guard;
unsigned long int vgetcpu_cache[2];
int __glibc_reserved1;
int __glibc_unused1;
/* Reservation of some values for the TM ABI. */
void *__private_tm[4];
/* GCC split stack support. */
void *__private_ss;
long int __glibc_reserved2;
/* Must be kept even if it is no longer used by glibc since programs,
like AddressSanitizer, depend on the size of tcbhead_t. */
__128bits __glibc_unused2[8][4] __attribute__ ((aligned (32)));
void *__padding[8];
} tcbhead_t;
The offsets of __private_tm are
i386: 36 bytes
x32: 48 bytes
x86_64: 80 bytes
and the offsets of pointer_guard are:
i386: 24 bytes
x32: 28 bytes
x86_64: 48 bytes
But config/linux/x86/tls.h had
#ifdef __x86_64__
#ifdef __LP64__
# define SEG_READ(OFS) "movq\t%%fs:(" #OFS "*8),%0"
# define SEG_WRITE(OFS) "movq\t%0,%%fs:(" #OFS "*8)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorq\t$17,%0\n\t" \
"xorq\t%%fs:48,%0"
# define SEG_ENCODE_WRITE(OFS) "xorq\t%%fs:48,%0\n\t" \
"rolq\t$17,%0\n\t" \
SEG_WRITE(OFS)
#else
// For X32.
# define SEG_READ(OFS) "movl\t%%fs:(" #OFS "*4),%0"
# define SEG_WRITE(OFS) "movl\t%0,%%fs:(" #OFS "*4)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorl\t$9,%0\n\t" \
"xorl\t%%fs:24,%0"
# define SEG_ENCODE_WRITE(OFS) "xorl\t%%fs:24,%0\n\t" \
"roll\t$9,%0\n\t" \
SEG_WRITE(OFS)
#endif
#else
# define SEG_READ(OFS) "movl\t%%gs:(" #OFS "*4),%0"
# define SEG_WRITE(OFS) "movl\t%0,%%gs:(" #OFS "*4)"
# define SEG_DECODE_READ(OFS) SEG_READ(OFS) "\n\t" \
"rorl\t$9,%0\n\t" \
"xorl\t%%gs:24,%0"
# define SEG_ENCODE_WRITE(OFS) "xorl\t%%gs:24,%0\n\t" \
"roll\t$9,%0\n\t" \
SEG_WRITE(OFS)
#endif
static inline struct gtm_thread *gtm_thr(void)
{
struct gtm_thread *r;
asm volatile (SEG_READ(10) : "=r"(r));
return r;
}
static inline void set_gtm_thr(struct gtm_thread *x)
{
asm volatile (SEG_WRITE(10) : : "r"(x));
}
static inline struct abi_dispatch *abi_disp(void)
{
struct abi_dispatch *r;
asm volatile (SEG_DECODE_READ(11) : "=r"(r));
return r;
}
static inline void set_abi_disp(struct abi_dispatch *x)
{
void *scratch;
asm volatile (SEG_ENCODE_WRITE(11) : "=r"(scratch) : "0"(x));
}
SEG_READ, SEG_WRITE, SEG_DECODE_READ and SEG_ENCODE_WRITE were correct
only for x86-64.
Update SEG_READ and SEG_WRITE to use the offset of __private_tm as base
and correct the offset of pointer_guard for x32. This patch doesn't
change ABI of libitm.
PR libitm/85988
* config/linux/x86/tls.h (SEG_READ): Use the offset of
__private_tm as base.
(SEG_WRITE): Likewise.
(SEG_ENCODE_WRITE): Correct the offset of pointer_guard for x32.
(gtm_thr): Replace SEG_READ(10) with SEG_READ(0).
(set_gtm_thr): Replace SEG_WRITE(10) with SEG_WRITE(0).
(abi_disp): Replace SEG_DECODE_READ(11) with SEG_DECODE_READ(1).
(set_abi_disp): Replace SEG_ENCODE_WRITE(11) with
SEG_ENCODE_WRITE(1).
From-SVN: r261491
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: Use scan-ltrans-tree-dump.
* lib/scanltranstree.exp: New file.
* lib/target-supports.exp (scan-ltrans-tree-dump_required_options)
(scan-ltrans-tree-dump-times_required_options)
(scan-ltrans-tree-dump-not_required_options)
(scan-ltrans-tree-dump-dem_required_options)
(scan-ltrans-tree-dump-dem-not_required_options): New proc.
* lib/gcc-dg.exp: Include scanltranstree.exp.
* testsuite/lib/libatomic.exp: Include scanltranstree.exp.
* testsuite/lib/libgomp.exp: Include scanltranstree.exp.
* testsuite/lib/libitm.exp: Include scanltranstree.exp.
* testsuite/lib/libvtv.exp: Include scanltranstree.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add ltrans-tree.
From-SVN: r259838
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: New test.
* gcc.dg/ipa/ipa-icf-38a.c: New test.
* lib/scandump.exp (dump-base): New proc.
(scan-dump, scan-dump-times, scan-dump-not, scan-dump-dem)
(scan-dump-dem-not): Add and handle parameter for suffix of the dump
base.
* lib/scanipa.exp: Add "" argument to scan-dump calls.
* lib/scanlang.exp: Same.
* lib/scanrtl.exp: Same.
* lib/scantree.exp: Same.
* lib/scanwpaipa.exp: New file.
* lib/gcc-dg.exp: Include scanwpaipa.exp.
* testsuite/lib/libatomic.exp: Include scanwpaipa.exp.
* testsuite/lib/libgomp.exp: Include scanwpaipa.exp.
* testsuite/lib/libitm.exp: Include scanwpaipa.exp.
* testsuite/lib/libvtv.exp: Include scanwpaipa.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add wpa-ipa.
From-SVN: r259837
Use unsigned integer to unwind shadow stack by replacing jle with jbe and
jg with ja.
PR target/85489
* config/x86/sjlj.S (GTM_longjmp): Replace jle/jg with jbe/ja.
From-SVN: r259559
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Expand the gtm_jmpbuf structure by one word field to add
Intel CET support further. The code in sjlj.S already
allocates more space on the stack then gtm_jmpbuf needs.
Use this extra space to absorb the new field.
The structure is allocated on the stack in such a way
that eip/rsp field is overlapped with return address on
the stack. Locate the new field right before eip/rsp so
code that accesses buffer fields relative to address of
gtm_jmpbuf has its offsets unchanged.
* libitm/config/x86/target.h: Add new field (ssp).
* libitm/config/x86/sjlj.S: Change offsets.
From-SVN: r254907
PR other/79046
libatomic/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libffi/
* configure.ac: Add GCC_BASE_VER.
* include/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* configure: Regenerated.
* testsuite/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* man/Makefile.in: Regenerated.
libgomp/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libitm/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libmpx/
* mpxrt/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* mpxwrap/Makefile.am (gcc_version): Likewise.
* mpxrt/Makefile.in: Regenerated.
* mpxwrap/Makefile.in: Regenerated.
liboffloadmic/
* plugin/configure.ac: Add GCC_BASE_VER.
* plugin/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* plugin/configure: Regenerated.
* plugin/aclocal.m4: Regenerated.
* plugin/Makefile.in: Regenerated.
libsanitizer/
* interception/Makefile.am (gcc_version): Use @get_gcc_base_ver@
instead of cat to get version from BASE-VER file.
* asan/Makefile.am (gcc_version): Likewise.
* ubsan/Makefile.am (gcc_version): Likewise.
* sanitizer_common/Makefile.am (gcc_version): Likewise.
* lsan/Makefile.am (gcc_version): Likewise.
* tsan/Makefile.am (gcc_version): Likewise.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libvtv/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
From-SVN: r244742
