Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
ChangeLog:
* configure: Regenerate.
* configure.ac: Do not add default runpaths to GCC exes
when we are building -static-libstdc++/-static-libgcc (the
default).
* libtool.m4: Add 'enable-darwin-at-runpath'. Act on the
enable flag to alter Darwin libraries to use @rpath names.
gcc/ChangeLog:
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* config/darwin.h: Handle Darwin rpaths.
* config/darwin.opt: Handle Darwin rpaths.
* Makefile.in: Handle Darwin rpaths.
gcc/ada/ChangeLog:
* gcc-interface/Makefile.in: Handle Darwin rpaths.
gcc/jit/ChangeLog:
* Make-lang.in: Handle Darwin rpaths.
libatomic/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libbacktrace/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
libgcc/ChangeLog:
* config/t-slibgcc-darwin: Generate libgcc_s
with an @rpath name.
* config.host: Handle Darwin rpaths.
libgfortran/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libgm2/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libm2cor/Makefile.am: Handle Darwin rpaths.
* libm2cor/Makefile.in: Regenerate.
* libm2iso/Makefile.am: Handle Darwin rpaths.
* libm2iso/Makefile.in: Regenerate.
* libm2log/Makefile.am: Handle Darwin rpaths.
* libm2log/Makefile.in: Regenerate.
* libm2min/Makefile.am: Handle Darwin rpaths.
* libm2min/Makefile.in: Regenerate.
* libm2pim/Makefile.am: Handle Darwin rpaths.
* libm2pim/Makefile.in: Regenerate.
libgomp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libitm/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libobjc/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libdruntime/Makefile.am: Handle Darwin rpaths.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libquadmath/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libsanitizer/ChangeLog:
* asan/Makefile.am: Handle Darwin rpaths.
* asan/Makefile.in: Regenerate.
* configure: Regenerate.
* hwasan/Makefile.am: Handle Darwin rpaths.
* hwasan/Makefile.in: Regenerate.
* lsan/Makefile.am: Handle Darwin rpaths.
* lsan/Makefile.in: Regenerate.
* tsan/Makefile.am: Handle Darwin rpaths.
* tsan/Makefile.in: Regenerate.
* ubsan/Makefile.am: Handle Darwin rpaths.
* ubsan/Makefile.in: Regenerate.
libssp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
lto-plugin/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
zlib/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
Handle the AR environment variable, used by gccgo,
the same way we handle the CC environment variable.
This ports https://go.dev/cl/526275 to the gofrontend repo.
This is needed for gccgo testing because the top-level GCC Makefile
now passes a --plugin option to ar if it supports one.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/526295
They are already collected via cmd/cgo.
The gccgo_link_c test is tweaked to do real linking as with this
change the cgo ldflags are not fully reflected in go build -n output,
since they now only come from the built archive.
This is a backport of https://go.dev/cl/497117 from the main repo.
For golang/go#60287
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/511675
In the Go 1.21 release the package internal/profile imports
internal/lazyregexp. That works when bootstrapping with Go 1.17,
because that compiler has internal/lazyregep and permits importing it.
We also have internal/lazyregexp in libgo, but since it is not installed
it is not available for importing. This CL adds internal/lazyregexp
to the list of internal packages that are installed for bootstrapping.
The Go 1.21, and earlier, releases have a couple of functions in
the internal/abi package that are always fully intrinsified.
The gofrontend recognizes and intrinsifies those functions as well.
However, the gofrontend was also building function descriptors
for references to the functions without calling them, which
failed because there was nothing to refer to. That is OK for the
gc compiler, which guarantees that the functions are only called,
not referenced. This CL arranges to not generate function descriptors
for these functions.
For golang/go#60913
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/504798
The final argument to mmap, of type off_t, varies.
In CL 445375 we changed it to always use the C off_t type,
but that broke 32-bit big-endian Linux systems. On those systems,
using the C off_t type requires calling the mmap64 function.
In C this is automatically handled by the <sys/mman.h> file.
In Go, we would have to change the magic //extern comment to
call mmap64 when appropriate. Rather than try to get that right,
we instead go through a C function that uses C implicit type
conversions to pick the right type.
Fixes PR go/110297
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/504415
In CL 384695 I simplified the code that built lists of benchmarks,
examples, and fuzz tests, and managed to break it. This CL corrects
the code to once again make the benchmarks available, and to run
the examples with output and the fuzz targets.
Doing this revealed a test failure in internal/fuzz on 32-bit x86:
a signalling NaN is turned into a quiet NaN on the 387 floating-point
stack that GCC uses by default. This CL skips the test.
Fixesgolang/go#60826
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/503798
Backport CL 421442 from upstream.
Original description:
Arrange for tests that call setMimeInit to fully restore the old values,
by clearing the sync.Once that controls initialization.
Once we've done that, call initMime in initMimeUnixTest because
otherwise the test types loaded there will be cleared by the call to
initMime that previously was not being done.
For golang/go#51648
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/483117
PR go/108057
The current version is the same as for the previous GCC release,
but there have been minor changes like new type descriptors that
make it impossible to run Go programs built with the previous GCC
release with the current libgo.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/456976
The last argument to the C mmap function is type off_t, not uintptr.
On some 32-bit systems, off_t is larger than uintptr.
Based on patch by Sören Tempel.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/445735
Previously, libgo relied on the _sigev_un implementation-specific
field in struct sigevent, which is only available on glibc.
This patch uses the sigev_notify_thread_id macro instead which is
mandated by timer_create(2). In theory, this should work with any libc
implementation for Linux. Unfortunately, there is an open glibc bug
as glibc does not define this macro. For this reason, a glibc-specific
workaround is required. Other libcs (such as musl) define the macro
and don't require the workaround.
See https://sourceware.org/bugzilla/show_bug.cgi?id=27417
This makes libgo compatible with musl libc.
Based on patch by Sören Tempel.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/434755
In GCCGO and gollvm, the logic for allocating one byte for the last field is:
1. the last field has zero size
2. the struct itself does not have zero size
3. the last field is not blank
this commit adds the last two conditions to runtime.structToFFI.
For golang/go#55146
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/431735
We were ignoring all functions starting with "__morestack_", but not
the function "__morestack" itself. Without this change, some tests
such as recover.go started failing recently, though I'm not sure
exactly what changed.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/427935
Avoid bash-specific ((expression)) syntax. As the bash syntax
converts a non-zero value to a zero status (and a zero value to a 1
status), and POSIX arithmetic expansion does not, we have to negate
the result.
Based on patch by Sören Tempel.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/419154
Add blank lines after //sys comments where needed, and then run gofmt
on the syscall package with the new formatter.
This is the libgo version of CL 407136.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/412074
This fixes a build issue on musl libc where the same signal number
is used for SIGIO and SIGPOLL. This causes a compilation error since
the signal numbers must be unique for the signal table.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/400595
The musl libc uses signal 34 internally for setgid (similar to how glibc
uses signal 32 and signal 33). For this reason, special handling is
needed for this signal in the runtime. The gc implementation already
handles the signal accordingly. As such, this commit intends to
simply copy the behavior of the Google Go implementation to libgo.
See https://go.dev/issues/39343
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/400594
Revert CL 245098. It caused incorrect initialization ordering.
Adjust the runtime package to work even with the CL reverted.
Original description of CL 245098:
This avoids requiring an init function to initialize the variable.
This can only be done if x is a static initializer.
The go1.15rc1 runtime package relies on this optimization.
The package has a variable "var maxSearchAddr = maxOffAddr".
The maxSearchAddr variable is used by code that runs before package
initialization is complete.
For golang/go#51913
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/395994
Using names depended on <asm/ptrace.h>, which glibc includes somewhere
but musl did not. Change to just always use indexes.
Based on patch by Sören Tempel.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/400214
