2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: Use scan-ltrans-tree-dump.
* lib/scanltranstree.exp: New file.
* lib/target-supports.exp (scan-ltrans-tree-dump_required_options)
(scan-ltrans-tree-dump-times_required_options)
(scan-ltrans-tree-dump-not_required_options)
(scan-ltrans-tree-dump-dem_required_options)
(scan-ltrans-tree-dump-dem-not_required_options): New proc.
* lib/gcc-dg.exp: Include scanltranstree.exp.
* testsuite/lib/libatomic.exp: Include scanltranstree.exp.
* testsuite/lib/libgomp.exp: Include scanltranstree.exp.
* testsuite/lib/libitm.exp: Include scanltranstree.exp.
* testsuite/lib/libvtv.exp: Include scanltranstree.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add ltrans-tree.
From-SVN: r259838
2018-05-02 Tom de Vries <tom@codesourcery.com>
PR testsuite/85106
* gcc.dg/ipa/ipa-icf-38.c: New test.
* gcc.dg/ipa/ipa-icf-38a.c: New test.
* lib/scandump.exp (dump-base): New proc.
(scan-dump, scan-dump-times, scan-dump-not, scan-dump-dem)
(scan-dump-dem-not): Add and handle parameter for suffix of the dump
base.
* lib/scanipa.exp: Add "" argument to scan-dump calls.
* lib/scanlang.exp: Same.
* lib/scanrtl.exp: Same.
* lib/scantree.exp: Same.
* lib/scanwpaipa.exp: New file.
* lib/gcc-dg.exp: Include scanwpaipa.exp.
* testsuite/lib/libatomic.exp: Include scanwpaipa.exp.
* testsuite/lib/libgomp.exp: Include scanwpaipa.exp.
* testsuite/lib/libitm.exp: Include scanwpaipa.exp.
* testsuite/lib/libvtv.exp: Include scanwpaipa.exp.
* doc/sourcebuild.texi (Commands for use in dg-final, Scan optimization
dump files): Add wpa-ipa.
From-SVN: r259837
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
The compiler builtin will use the hardware instruction cdsg if the
memory operand is properly aligned and will fall back to the
library call otherwise.
In case the compiler for one part is able to detect that the
location is aligned and fails to do so for another usage of the hw
instruction and the sw fall back would be mixed on the same memory
location. To avoid this the library fall back also has to use the
hardware instruction if possible.
libatomic/ChangeLog:
2018-03-09 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/s390/exch_n.c: New file.
* configure.tgt: Add the config directory for s390.
From-SVN: r258384
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Libatomic builds a few functions for Arm with an explicit -march
option. This option does not specify an FPU, which can lead to
problems when targeting a hard-float or softfp environment since the
architecture appears to be incompatible with the selected ABI.
The fix is simple enough, just add +fp (the minimum floating point
option) to the architecture. We don't use anything from the FP
architecture, so it shouldn't really change anything; and if we are
building for -mfloat-abi=soft the canonicalization process will remove
the unnecessary fp attributes anyway.
* Makefile.am: (IFUNC_OPTIONS): Set the architecture to
-march=armv7-a+fp on Linux/Arm.
* Makefile.in: Regenerated.
From-SVN: r253935
libatomic/ChangeLog:
2017-10-02 Martin Sebor <msebor@redhat.com>
PR c/81854
* acinclude.m4 (LIBAT_CHECK_IFUNC): Have ifunc resolver return
a function pointer rather than void* to avoid GCC 8 warnings.
* configure: Regenerate.
* libatomic_i.h: Declare ifunc resolvers to return function
pointers rather than void*.
From-SVN: r253372
gcc/
* builtins.c (fold_builtin_atomic_always_lock_free): Make "lock-free"
conditional on existance of a fast atomic load.
* optabs-query.c (can_atomic_load_p): New function.
* optabs-query.h (can_atomic_load_p): Declare it.
* optabs.c (expand_atomic_exchange): Always delegate to libatomic if
no fast atomic load is available for the particular size of access.
(expand_atomic_compare_and_swap): Likewise.
(expand_atomic_load): Likewise.
(expand_atomic_store): Likewise.
(expand_atomic_fetch_op): Likewise.
* testsuite/lib/target-supports.exp
(check_effective_target_sync_int_128): Remove x86 because it provides
no fast atomic load.
(check_effective_target_sync_int_128_runtime): Likewise.
libatomic/
* acinclude.m4: Add #define FAST_ATOMIC_LDST_*.
* auto-config.h.in: Regenerate.
* config/x86/host-config.h (FAST_ATOMIC_LDST_16): Define to 0.
(atomic_compare_exchange_n): New.
* glfree.c (EXACT, LARGER): Change condition and add comments.
From-SVN: r245098
ARM libatomic inline asm uses sel, uadd8, uadd16 instructions
which are only available if __ARM_FEATURE_SIMD32 is defined.
libatomic/
2017-01-30 Szabolcs Nagy <szabolcs.nagy@arm.com>
PR target/78945
* config/arm/exch_n.c (libat_exchange): Check __ARM_FEATURE_SIMD32.
From-SVN: r245023
PR other/79046
libatomic/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libffi/
* configure.ac: Add GCC_BASE_VER.
* include/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* configure: Regenerated.
* testsuite/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* man/Makefile.in: Regenerated.
libgomp/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libitm/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libmpx/
* mpxrt/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* mpxwrap/Makefile.am (gcc_version): Likewise.
* mpxrt/Makefile.in: Regenerated.
* mpxwrap/Makefile.in: Regenerated.
liboffloadmic/
* plugin/configure.ac: Add GCC_BASE_VER.
* plugin/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* plugin/configure: Regenerated.
* plugin/aclocal.m4: Regenerated.
* plugin/Makefile.in: Regenerated.
libsanitizer/
* interception/Makefile.am (gcc_version): Use @get_gcc_base_ver@
instead of cat to get version from BASE-VER file.
* asan/Makefile.am (gcc_version): Likewise.
* ubsan/Makefile.am (gcc_version): Likewise.
* sanitizer_common/Makefile.am (gcc_version): Likewise.
* lsan/Makefile.am (gcc_version): Likewise.
* tsan/Makefile.am (gcc_version): Likewise.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libvtv/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
From-SVN: r244742
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Need to properly check if -march=i486 is really needed for -m32 build
of libatomic on Linux/x86 and Linux/x86-64.
PR target/70454
* configure.tgt (XCFLAGS): Revert the last change.
From-SVN: r235411
Gcc uses the same -march= for both -m32 and -m64 on x86-64 unless
--with-arch-32= is used. There is no need for -march=i486 to compile
32-bit libatomic on x86-64.
PR target/70454
* configure.tgt (XCFLAGS): Don't add -march=i486 to compile
32-bit x86 target library on x86-64.
From-SVN: r235287
The all-multi target may be built in parallel with the %_.lo
targets which generate make dependencies that are parsed during
the build of all-multi.
This patch forces all-multi to only run after the *_.lo targets
are done.
libatomic:
PR other/67627
* Makefile.am (all-multi): Add dependency.
* Makefile.in: Regenerate.
From-SVN: r232102
PR c/65083 notes that some functions in <stdatomic.h> are normal
functions, not generic functions, and so need to have out-of-line
copies that can be called when macro expansion is suppressed (unlike
the generic functions where DR#419 makes it undefined if you suppress
a macro expansion).
This patch adds such out-of-line definitions in libatomic for those
six functions, at a new LIBATOMIC_1.2 symbol version, as trivial
wrappers to the <stdatomic.h> macros, along with declarations of those
functions in <stdatomic.h>. Tests are added that are based on the
corresponding tests for the macros, but with parentheses around the
function names to force the out-of-line functions to be used.
Bootstrapped with no regressions on x86_64-pc-linux-gnu.
gcc:
* ginclude/stdatomic.h (atomic_thread_fence, atomic_signal_fence)
(atomic_flag_test_and_set, atomic_flag_test_and_set_explicit)
(atomic_flag_clear, atomic_flag_clear_explicit): Declare as
functions before defining as macros.
gcc/testsuite:
* gcc.dg/atomic/stdatomic-fence-2.c,
gcc.dg/atomic/stdatomic-flag-2.c: New tests.
libatomic:
* fence.c, flag.c: New files.
* Makefile.am (libatomic_la_SOURCES): Add fence.c and flag.c.
* Makefile.in: Regenerate.
* configure.ac (libtool_VERSION): Change to 3:0:2.
* configure: Regenerate.
* libatomic.map (LIBATOMIC_1.2): New symbol version.
From-SVN: r230578
This patch adds an easy way to write tests for expected multiline
output. For example we can test carets and underlines for
a particular diagnostic with:
/* { dg-begin-multiline-output "" }
typedef struct _GMutex GMutex;
^~~~~~~
{ dg-end-multiline-output "" } */
multiline.exp is used by prune.exp; hence we need to load it before
prune.exp via *load_gcc_lib* for the testsuites of the various
non-"gcc" support libraries (e.g. boehm-gc).
gcc/testsuite/ChangeLog:
* lib/multiline.exp: New file.
* lib/prune.exp: Load multiline.exp.
(prune_gcc_output): Call into multiline.exp to handle any
multiline output directives.
* lib/libgo.exp: Load multiline.exp before prune.exp, using
load_gcc_lib.
boehm-gc/ChangeLog:
* testsuite/lib/boehm-gc.exp: Load multiline.exp before
prune.exp, using load_gcc_lib.
libatomic/ChangeLog:
* testsuite/lib/libatomic.exp: Load multiline.exp before
prune.exp, using load_gcc_lib.
libgomp/ChangeLog:
* testsuite/lib/libgomp.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
libitm/ChangeLog:
* testsuite/lib/libitm.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
libvtv/ChangeLog:
* testsuite/lib/libvtv.exp: Load multiline.exp before prune.exp,
using load_gcc_lib.
From-SVN: r228655
PR c++/60272
gcc/
* builtins.c (expand_builtin_atomic_compare_exchange): Conditionalize
on failure the store back into EXPECT.
libatomic/
* cas_n.c (libat_compare_exchange): Conditionalize on failure
the store back to EPTR.
From-SVN: r207966
* testsuite/libatomic.c/atomic-compare-exchange-1.c,
testsuite/libatomic.c/atomic-compare-exchange-2.c,
testsuite/libatomic.c/atomic-compare-exchange-3.c,
testsuite/libatomic.c/atomic-compare-exchange-4.c,
testsuite/libatomic.c/atomic-compare-exchange-5.c,
testsuite/libatomic.c/atomic-exchange-1.c,
testsuite/libatomic.c/atomic-exchange-2.c,
testsuite/libatomic.c/atomic-exchange-3.c,
testsuite/libatomic.c/atomic-exchange-4.c,
testsuite/libatomic.c/atomic-exchange-5.c,
testsuite/libatomic.c/atomic-generic.c,
testsuite/libatomic.c/atomic-load-1.c,
testsuite/libatomic.c/atomic-load-2.c,
testsuite/libatomic.c/atomic-load-3.c,
testsuite/libatomic.c/atomic-load-4.c,
testsuite/libatomic.c/atomic-load-5.c,
testsuite/libatomic.c/atomic-op-1.c,
testsuite/libatomic.c/atomic-op-2.c,
testsuite/libatomic.c/atomic-op-3.c,
testsuite/libatomic.c/atomic-op-4.c,
testsuite/libatomic.c/atomic-op-5.c,
testsuite/libatomic.c/atomic-store-1.c,
testsuite/libatomic.c/atomic-store-2.c,
testsuite/libatomic.c/atomic-store-3.c,
testsuite/libatomic.c/atomic-store-4.c,
testsuite/libatomic.c/atomic-store-5.c: Declare main as returning
int. Do not require built-in sync support or add target-specific
options.
* testsuite/libatomic.c/atomic-exchange-1.c,
testsuite/libatomic.c/atomic-exchange-2.c,
testsuite/libatomic.c/atomic-exchange-3.c,
testsuite/libatomic.c/atomic-exchange-4.c,
testsuite/libatomic.c/atomic-exchange-5.c: Separate increments of
count from expression using value of count.
From-SVN: r204953
gcc:
2013-11-05 Andrew MacLeod <amacleod@redhat.com>
Joseph Myers <joseph@codesourcery.com>
* tree-core.h (enum cv_qualifier): Add TYPE_QUAL_ATOMIC.
(enum tree_index): Add TI_ATOMICQI_TYPE, TI_ATOMICHI_TYPE,
TI_ATOMICSI_TYPE, TI_ATOMICDI_TYPE and TI_ATOMICTI_TYPE.
(struct tree_base): Add atomic_flag field.
* tree.h (TYPE_ATOMIC): New accessor macro.
(TYPE_QUALS, TYPE_QUALS_NO_ADDR_SPACE): Add TYPE_QUAL_ATOMIC.
(TYPE_QUALS_NO_ADDR_SPACE_NO_ATOMIC): New macro.
(atomicQI_type_node, atomicHI_type_node, atomicSI_type_node)
(atomicDI_type_node, atomicTI_type_node): New macros for type
nodes.
* tree.c (set_type_quals): Set TYPE_ATOMIC.
(find_atomic_core_type): New function.
(build_qualified_type): Adjust alignment for qualified types.
(build_atomic_base): New function
(build_common_tree_nodes): Build atomicQI_type_node,
atomicHI_type_node, atomicSI_type_node, atomicDI_type_node and
atomicTI_type_node.
* print-tree.c (print_node): Print atomic qualifier.
* tree-pretty-print.c (dump_generic_node): Print atomic type
attribute.
* target.def (atomic_assign_expand_fenv): New hook.
* doc/tm.texi.in (TARGET_ATOMIC_ASSIGN_EXPAND_FENV): New @hook.
* doc/tm.texi: Regenerate.
* targhooks.c (default_atomic_assign_expand_fenv): New function.
* targhooks.h (default_atomic_assign_expand_fenv): Declare.
* sync-builtins.def (__atomic_feraiseexcept): New built-in
function.
* config/i386/i386-builtin-types.def (VOID_FTYPE_PUSHORT): New
function type.
* config/i386/i386.c (enum ix86_builtins): Add
IX86_BUILTIN_FNSTENV, IX86_BUILTIN_FLDENV, IX86_BUILTIN_FNSTSW and
IX86_BUILTIN_FNCLEX.
(bdesc_special_args): Add __builtin_ia32_fnstenv,
__builtin_ia32_fldenv, __builtin_ia32_fnstsw and
__builtin_ia32_fnclex.
(ix86_expand_builtin): Handle the new built-in functions.
(ix86_atomic_assign_expand_fenv): New function.
(TARGET_ATOMIC_ASSIGN_EXPAND_FENV): New macro.
* config/i386/i386.md (UNSPECV_FNSTENV, UNSPECV_FLDENV)
(UNSPECV_FNSTSW, UNSPECV_FNCLEX): New unspecs.
(fnstenv, fldenv, fnstsw, fnclex): New insns.
gcc/c-family:
2013-11-05 Andrew MacLeod <amacleod@redhat.com>
Joseph Myers <joseph@codesourcery.com>
* c-common.h (enum rid): Add RID_ATOMIC.
* c-common.c (c_common_reswords): Add _Atomic.
(sync_resolve_params): Use TYPE_MAIN_VARIANT on pointer argument.
(keyword_is_type_qualifier): Accept RID_ATOMIC.
* c-format.c (check_format_types): Check for extra _Atomic
qualifiers in format argument.
* c-pretty-print.c (pp_c_cv_qualifiers): Handle atomic qualifier.
(pp_c_type_qualifier_list): Mention _Atomic in comment.
gcc/c:
2013-11-05 Joseph Myers <joseph@codesourcery.com>
Andrew MacLeod <amacleod@redhat.com>
* c-aux-info.c (gen_type): Handle atomic qualifier.
* c-decl.c (validate_proto_after_old_defn): Do not remove atomic
qualifiers when compating types.
(shadow_tag_warned): Handle atomic_p in declspecs.
(quals_from_declspecs): Likewise.
(start_decl): Use c_type_promotes_to when promoting argument
types.
(grokdeclarator): Handle _Atomic.
(get_parm_info): Diagnose any qualifier on "void" as only
parameter.
(store_parm_decls_oldstyle): Do not remove atomic qualifiers when
comparing types. Use c_type_promotes_to when promoting argument
types.
(finish_function): Use c_type_promotes_to when promoting argument
types.
(build_null_declspecs): Handle atomic_p in declspecs.
(declspecs_add_qual): Handle RID_ATOMIC.
* c-parser.c (c_token_starts_typename, c_token_is_qualifier)
(c_token_starts_declspecs): Handle RID_ATOMIC.
(c_parser_declspecs): Handle atomic type specifiers and
qualifiers.
(c_parser_typeof_specifier): Remove const and _Atomic qualifiers
from types of expressions with atomic type.
(c_parser_direct_declarator_inner): Use convert_lvalue_to_rvalue.
(c_parser_attribute_any_word): Handle RID_ATOMIC.
(c_parser_initializer, c_parser_initelt, c_parser_initval)
(c_parser_statement_after_labels, c_parser_switch_statement)
(c_parser_for_statement, c_parser_expr_no_commas)
(c_parser_conditional_expression, c_parser_binary_expression)
(c_parser_cast_expression, c_parser_unary_expression)
(c_parser_postfix_expression)
(c_parser_postfix_expression_after_primary, c_parser_expression):
Use convert_lvalue_to_rvalue.
(c_parser_expression_conv, c_parser_expr_list): Document
conversion of lvalues to rvalues. Use convert_lvalue_to_rvalue.
(c_parser_objc_synchronized_statement): Use
convert_lvalue_to_rvalue.
(c_parser_objc_selector): Handle RID_ATOMIC.
(c_parser_objc_receiver, c_parser_array_notation): Use
convert_lvalue_to_rvalue.
* c-tree.h (ctsk_typeof): Adjust comment to mention use for
_Atomic (type-name).
(struct c_declspecs): Add atomic_p field.
(convert_lvalue_to_rvalue): Declare.
* c-typeck.c (c_type_promotes_to): Promote atomic types to
corresponding atomic types.
(qualify_type): Don't add _Atomic qualifiers from second argument.
(comp_target_types): Do not allow _Atomic mismatches.
(type_lists_compatible_p): Do not remove atomic qualifiers when
comparing types.
(really_atomic_lvalue, convert_lvalue_to_rvalue)
(build_atomic_assign): New functions.
(build_unary_op): Use build_atomic_assign for atomic increment and
decrement.
(build_conditional_expr): Do not treat _Atomic void as a qualified
version of void.
(build_modify_expr): Use build_atomic_assign for atomic LHS.
(find_anonymous_field_with_type, convert_to_anonymous_field)
(convert_for_assignment): Do not remove atomic qualifiers when
comparing types.
(digest_init): Do not accept initialization of arrays of atomic
elements by string constants.
(build_asm_expr): Use convert_lvalue_to_rvalue.
(build_binary_op): Do not treat _Atomic void as a qualified
version of void.
gcc/objc:
2013-11-05 Andrew MacLeod <amacleod@redhat.com>
* objc-act.c (objc_push_parm): Handle atomic qualifier.
gcc/testsuite:
2013-11-05 Joseph Myers <joseph@codesourcery.com>
* lib/target-supports.exp
(check_effective_target_fenv_exceptions): New function.
* lib/atomic-dg.exp, gcc.dg/atomic/atomic.exp: New files.
* gcc.dg/atomic/c11-atomic-exec-1.c,
gcc.dg/atomic/c11-atomic-exec-2.c,
gcc.dg/atomic/c11-atomic-exec-3.c,
gcc.dg/atomic/c11-atomic-exec-4.c,
gcc.dg/atomic/c11-atomic-exec-5.c, gcc.dg/c11-atomic-1.c,
gcc.dg/c11-atomic-2.c, gcc.dg/c11-atomic-3.c,
gcc.dg/c90-atomic-1.c, gcc.dg/c99-atomic-1.c: New tests.
libatomic:
2013-11-05 Joseph Myers <joseph@codesourcery.com>
* fenv.c: New file.
* libatomic.map (LIBATOMIC_1.1): New symbol version. Include
__atomic_feraiseexcept.
* configure.ac (libtool_VERSION): Change to 2:0:1.
(fenv.h): Test for header.
* Makefile.am (libatomic_la_SOURCES): Add fenv.c.
* Makefile.in, auto-config.h.in, configure: Regenerate.
From-SVN: r204544
