We must guard used atomic builtins with GCOV_SUPPORTS_ATOMIC.
The patch is tested on AIX and I'm going to push it.
libgcc/ChangeLog:
PR gcov-profile/95480
* libgcov-profiler.c (GCOV_SUPPORTS_ATOMIC): Move to...
* libgcov.h (GCOV_SUPPORTS_ATOMIC): ...here.
(gcov_counter_add): Use GCOV_SUPPORTS_ATOMIC guard.
(gcov_counter_set_if_null): Likewise.
The ISA manual specifies that divide by zero always returns -1 as the result.
We were failing to do that when the dividend was negative.
Original patch from Virginie Moser.
libgcc/
* config/riscv/div.S (__divdi3): For negative arguments, change bgez
to bgtz.
The calloc was in the original tested version of the patch
and I made accidental last minute change.
Installed to master as obvious.
libgcc/ChangeLog:
* libgcov.h (gcov_topn_add_value): Use xcalloc instead
of xmalloc.
gcc/ChangeLog:
* coverage.c (get_coverage_counts): Skip sanity check for TOP N counters
as they have variable number of counters.
* gcov-dump.c (main): Add new option -r.
(print_usage): Likewise.
(tag_counters): All new raw format.
* gcov-io.h (struct gcov_kvp): New.
(GCOV_TOPN_VALUES): Remove.
(GCOV_TOPN_VALUES_COUNTERS): Likewise.
(GCOV_TOPN_MEM_COUNTERS): New.
(GCOV_TOPN_DISK_COUNTERS): Likewise.
(GCOV_TOPN_MAXIMUM_TRACKED_VALUES): Likewise.
* ipa-profile.c (ipa_profile_generate_summary): Use
GCOV_TOPN_MAXIMUM_TRACKED_VALUES.
(ipa_profile_write_edge_summary): Likewise.
(ipa_profile_read_edge_summary): Likewise.
(ipa_profile): Remove usage of GCOV_TOPN_VALUES.
* profile.c (sort_hist_values): Sort variable number
of counters.
(compute_value_histograms): Special case for TOP N counters
that have dynamic number of key-value pairs.
* value-prof.c (dump_histogram_value): Dump variable number
of key-value pairs.
(stream_in_histogram_value): Stream in variable number
of key-value pairs for TOP N counter.
(get_nth_most_common_value): Deal with variable number
of key-value pairs.
(dump_ic_profile): Use GCOV_TOPN_MAXIMUM_TRACKED_VALUES
for loop iteration.
(gimple_find_values_to_profile): Set GCOV_TOPN_MEM_COUNTERS
to n_counters.
* doc/gcov-dump.texi: Document new -r option.
libgcc/ChangeLog:
* libgcov-driver.c (prune_topn_counter): Remove.
(prune_counters): Likewise.
(merge_one_data): Special case TOP N counters
as they have variable length.
(write_top_counters): New.
(write_one_data): Special case TOP N.
(dump_one_gcov): Do not prune TOP N counters.
* libgcov-merge.c (merge_topn_values_set): Remove.
(__gcov_merge_topn): Use gcov_topn_add_value.
* libgcov-profiler.c (__gcov_topn_values_profiler_body):
Likewise here.
* libgcov.h (gcov_counter_add): New.
(gcov_counter_set_if_null): Likewise.
(gcov_topn_add_value): New.
Windows ABI (MinGW) is different than Linux ABI when bitfileds are involved.
The following patch adds __attribute__ ((gcc_struct)) to struct fenv in order
to match the layout of x87 state image in memory.
2020-06-01 Uroš Bizjak <ubizjak@gmail.com>
libatomic/ChangeLog:
* config/x86/fenv.c (struct fenv): Add __attribute__ ((gcc_struct)).
libgcc/ChangeLog:
* config/i386/sfp-exceptions.c (struct fenv):
Add __attribute__ ((gcc_struct)).
libgfortran/ChangeLog:
PR libfortran/95418
* config/fpu-387.h (struct fenv): Add __attribute__ ((gcc_struct)).
Update VPCLMULQDQ check to support processors with AVX version of
VPCLMULQDQ.
PR target/91695
* config/i386/cpuinfo.c (get_available_features): Fix VPCLMULQDQ
check.
Add FEATURE_AVX512VP2INTERSECT to libgcc so that enum processor_features
in libgcc matches enum processor_features in i386-builtins.c. Update
GFNI check to support processors with SSE and AVX versions of GFNI.
PR target/95212
PR target/95220
* config/i386/cpuinfo.c (get_available_features): Fix
FEATURE_GFNI check. Also check FEATURE_AVX512VP2INTERSECT.
* config/i386/cpuinfo.h (processor_features): Add
FEATURE_AVX512VP2INTERSECT.
Part of the removal of crisv32-* and cris-*-linux* (cris-elf remains).
libgcc:
* config.host: Remove support for crisv32-*-* and cris*-*-linux.
* config/cris/libgcc-glibc.ver, config/cris/t-linux: Remove.
Introduce math_force_eval_div to use generic division to generate
INEXACT as well as INVALID and DIVZERO exceptions.
libgcc/ChangeLog:
* config/i386/sfp-exceptions.c (__math_force_eval): Remove.
(__math_force_eval_div): New define.
(__sfp_handle_exceptions): Use __math_force_eval_div to use
generic division to generate INVALID, DIVZERO and INEXACT
exceptions.
libatomic/ChangeLog:
* config/x86/fenv.c (__math_force_eval): Remove.
(__math_force_eval_div): New define.
(__atomic_deraiseexcept): Use __math_force_eval_div to use
generic division to generate INVALID, DIVZERO and INEXACT
exceptions.
libgfortran/ChangeLog:
* config/fpu-387.h (__math_force_eval): Remove.
(__math_force_eval_div): New define.
(local_feraiseexcept): Use __math_force_eval_div to use
generic division to generate INVALID, DIVZERO and INEXACT
exceptions.
(struct fenv): Define named struct instead of typedef.
This version of the fix uses __getauxval instead of getauxval.
The whole thing is guarded simply on __gnu_linux__.
__getauxval was introduced in 2.16 but the aarch64 port was added in 2.17 so in practice I expect all aarch64 glibcs to support __getauxval.
Bootstrapped and tested on aarch64-none-linux-gnu.
Also tested on aarch64-none-elf.
2020-05-06 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/aarch64/lse-init.c (init_have_lse_atomics): Use __getauxval
instead of getauxval.
(AT_HWCAP): Define.
(HWCAP_ATOMICS): Define.
Guard detection on __gnu_linux__.
PR gcov-profile/93623
* libgcov-interface.c (__gcov_fork): Do not flush
and reset only in child process.
(__gcov_execl): Dump counters only and reset them
only if exec* fails.
(__gcov_execlp): Likewise.
(__gcov_execle): Likewise.
(__gcov_execv): Likewise.
(__gcov_execvp): Likewise.
(__gcov_execve): Likewise.
Introduce math_force_eval to evaluate generic division to generate
INVALID and DIVZERO exceptions.
libgcc/ChangeLog:
* config/i386/sfp-exceptions.c (__math_force_eval): New define.
(__sfp_handle_exceptions): Use __math_force_eval to evaluete
generic division to generate INVALID and DIVZERO exceptions.
libatomic/ChangeLog:
* config/x86/fenv.c (__math_force_eval): New define.
(__atomic_feraiseexcept): Use __math_force_eval to evaluete
generic division to generate INVALID and DIVZERO exceptions.
libgfortran/ChangeLog:
* config/fpu-387.h (__math_force_eval): New define.
(local_feraiseexcept): Use __math_force_eval to evaluete
generic division to generate INVALID and DIVZERO exceptions.
Since commit e154242724 the flag -many is
sometimes not passed to the assembler. Use .machine ppc to prevent
errors if these files are assembled for an ISA which does not support
FPRs.
libgcc/
* config/rs6000/crtresfpr.S: Use .machine ppc.
* config/rs6000/crtresxfpr.S: Likewise.
* config/rs6000/crtsavfpr.S: Likewise.
With -mbranch-protection=pac-ret the debug info toggles the
signedness state of the return address so the unwinder knows when
the return address needs pointer authentication.
The unwind context flags were not updated according to the dwarf
frame info.
This causes unwinding across frames that were built without pac-ret
to incorrectly authenticate the return address wich corrupts the
return address on a system where PAuth is enabled.
Note: This even affects systems where all code use pac-ret because
unwinding across a signal frame the return address is not signed.
gcc/testsuite/ChangeLog:
PR target/94514
* g++.target/aarch64/pr94514.C: New test.
* gcc.target/aarch64/pr94514.c: New test.
libgcc/ChangeLog:
PR target/94514
* config/aarch64/aarch64-unwind.h (aarch64_frob_update_context):
Update context->flags accroding to the frame state.
According to "Intel 64 and IA32 Arch SDM, Vol. 3:
"Because SIMD floating-point exceptions are precise and occur immediately,
the situation does not arise where an x87 FPU instruction, a WAIT/FWAIT
instruction, or another SSE/SSE2/SSE3 instruction will catch a pending
unmasked SIMD floating-point exception."
Remove unneeded assignments to volatile memory.
libgcc/ChangeLog:
* config/i386/sfp-exceptions.c (__sfp_handle_exceptions) [__SSE_MATH__]:
Remove unneeded assignments to volatile memory.
libatomic/ChangeLog:
* config/x86/fenv.c (__atomic_feraiseexcept) [__SSE_MATH__]:
Remove unneeded assignments to volatile memory.
libgfortran/ChangeLog:
* config/fpu-387.h (local_feraiseexcept) [__SSE_MATH__]:
Remove unneeded assignments to volatile memory.
As reported in the PR, GCC 10 (and also 9.3.1 but not 9.3.0) fails to build
when using older binutils which lack LSE support, because those instructions
are used in libgcc.
Thanks to Kyrylo's hint, the following patches (hopefully) allow it to build
even with older binutils by using .inst directive if LSE support isn't
available in the assembler.
2020-04-15 Jakub Jelinek <jakub@redhat.com>
PR target/93053
* configure.ac (LIBGCC_CHECK_AS_LSE): Add HAVE_AS_LSE checking.
* config/aarch64/lse.S: Include auto-target.h, if HAVE_AS_LSE
is not defined, use just .arch armv8-a.
(B, M, N, OPN): Define.
(COMMENT): New .macro.
(CAS, CASP, SWP, LDOP): Use .inst directive if HAVE_AS_LSE is not
defined. Otherwise, move the operands right after the glue? and
comment out operands where the macros are used.
* configure: Regenerated.
* config.in: Regenerated.
Check for and handle new skip trace addresses when unwinding on zTPF.
libgcc/ChangeLog:
2020-04-03 Jim Johnston <jjohnst@us.ibm.com>
* config/s390/tpf-unwind.h (MIN_PATRANGE, MAX_PATRANGE)
(TPFRA_OFFSET): Macros removed.
(CP_CNF, cinfc_fast, CINFC_CMRESET, CINTFC_CMCENBKST)
(CINTFC_CMCENBKED, ICST_CRET, ICST_SRET, LOWCORE_PAGE3_ADDR)
(PG3_SKIPPING_OFFSET): New macros.
(__isPATrange): Use cinfc_fast for the check.
(__isSkipResetAddr): New function.
(s390_fallback_frame_state): Check for skip trace addresses. Use
either ICST_CRET or ICST_SRET to calculate return address
location.
(__tpf_eh_return): Handle skip trace addresses.
The recent patch to convert all thumb1 code in libgcc to unified syntax
ommitted the conditional code that is used only when building the library
for minimal size. This patch fixes this case.
I've also fixed the COND macro so that a single definition is always used
that is for unified syntax. This eliminates a warning that is now being
seen from the assembler when compiling the ieee fp support code.
PR target/94220
* config/arm/lib1funcs.asm (COND): Use a single definition for
unified syntax.
(aeabi_uidivmod): Unified syntax when optimizing Thumb for size.
(aeabi_idivmod): Likewise.
(divsi3_skip_div0_test): Likewise.
This patch adds a new multilib for armv8.1-m.main+mve with hard float abi. For
armv8.1-m.main+mve soft and softfp, the v8-M multilibs will be reused.
The following mappings are also updated:
"-mfloat-abi=hard -march=armv8.1-m.main+mve.fp -> armv8-m.main+fp/hard"
"-mfloat-abi=softfp -march=armv8.1-m.main+mve.fp -> armv8-m.main+fp/softfp"
"-mfloat-abi=soft -march=armv8.1-m.main+mve.fp -> armv8-m.main/nofp"
gcc/ChangeLog:
2020-03-17 Mihail Ionescu <mihail.ionescu@arm.com>
* config/arm/t-rmprofile: create new multilib for
armv8.1-m.main+mve hard float and reuse v8-m.main ones for
v8.1-m.main+mve .
gcc/testsuite/ChangeLog:
2020-03-17 Mihail Ionescu <mihail.ionescu@arm.com>
* gcc.target/arm/multilib.exp: Add new v8.1-M entry.
libgcc/ChangLog:
2020-03-17 Mihail Ionescu <mihail.ionescu@arm.com>
* config/arm/t-arm: Do not compile cmse_nonsecure_call.S for v8.1-m.
libgcc is supposed to be built with the trace skip flags and branch
targets. Add a zTPF header file fragment and add the -mtpf-trace-skip
option.
libgcc/ChangeLog:
2020-03-04 Andreas Krebbel <krebbel@linux.ibm.com>
* config.host: Include the new makefile fragment.
* config/s390/t-tpf: New file.
Unified syntax has been the official syntax for thumb1 assembly for
over 10 years now. It's time we made preparations for that becoming
the default in the assembler. But before we can start doing that we
really need to clean up some laggards from the olden days. Libgcc
support for thumb1 is one such example.
This patch converts all of the legacy (disjoint) syntax that I could
find over to unified code. The identification was done by using a
trick version of gas that defaulted to unified mode which then faults
if legacy syntax is encountered. The code produced was then compared
against the old code to check for differences. One such difference
does exist, but that is because in unified syntax 'movs rd, rn' is
encoded as 'lsls rd, rn, #0', rather than 'adds rd, rn, #0'; but that
is a deliberate change that was introduced because the lsls encoding
more closely reflects the behaviour of 'movs' in arm state (where only
some of the condition flags are modified).
* config/arm/bpabi-v6m.S (aeabi_lcmp): Convert thumb1 code to unified
syntax.
(aeabi_ulcmp, aeabi_ldivmod, aeabi_uldivmod): Likewise.
(aeabi_frsub, aeabi_cfcmpeq, aeabi_fcmpeq): Likewise.
(aeabi_fcmp, aeabi_drsub, aeabi_cdrcmple): Likewise.
(aeabi_cdcmpeq, aeabi_dcmpeq, aeabi_dcmp): Likewise.
* config/arm/lib1funcs.S (Lend_fde): Convert thumb1 code to unified
syntax.
(divsi3, modsi3): Likewise.
(clzdi2, ctzsi2): Likewise.
* config/arm/libunwind.S (restore_core_regs): Convert thumb1 code to
unified syntax.
(UNWIND_WRAPPER): Likewise.
PR ipa/92924
* common.opt: Add -fprofile-reproducibility.
* doc/invoke.texi: Document it.
* value-prof.c (dump_histogram_value):
Document and support behavior for counters[0]
being a negative value.
(get_nth_most_common_value): Handle negative
counters[0] in respect to flag_profile_reproducible.
PR ipa/92924
* libgcov-merge.c (merge_topn_values_set): Record
when a TOP N counter becomes invalid. When merging
remove a smallest value if the space is needed.
On bare-metal targets, I/O support is typically provided by a BSP and
requires a linker script and/or hosting library to be specified on the
linker command line. Linking an empty program with the default linker
script may succeed, however, which confuses libstdc++ configuration
when programs that probe for the presence of various I/O features fail
with link errors.
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
config/
* no-executables.m4: Use a non-empty program to test for linker
support.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libiberty/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++v-3/
* configure: Regenerated.
Linux CET kernel places a restore token on shadow stack for signal
handler to enhance security. The restore token is 8 byte and aligned
to 8 bytes. It is usually transparent to user programs since kernel
will pop the restore token when signal handler returns. But when an
exception is thrown from a signal handler, now we need to pop the
restore token from shadow stack. For x86-64, we just need to treat
the signal frame as normal frame. For i386, we need to search for
the restore token to check if the original shadow stack is 8 byte
aligned. If the original shadow stack is 8 byte aligned, we just
need to pop 2 slots, one restore token, from shadow stack. Otherwise,
we need to pop 3 slots, one restore token + 4 byte padding, from
shadow stack.
This patch also includes 2 tests, one has a restore token with 4 byte
padding and one without.
Tested on Linux/x86-64 CET machine with and without -m32.
libgcc/
PR libgcc/85334
* config/i386/shadow-stack-unwind.h (_Unwind_Frames_Increment):
New.
gcc/testsuite/
PR libgcc/85334
* g++.target/i386/pr85334-1.C: New test.
* g++.target/i386/pr85334-2.C: Likewise.
Commit r10-6500-g811a475ea3fcc55ee4aea7c81171891ef19dfc25 broke the
GCC build for arm-none-uclinuxfdpiceabi, as it forgot to update some
uses of gnu_Unwind_Find_got.
2020-02-10 Christophe Lyon <christophe.lyon@linaro.org>
libgcc/
PR target/93615
* unwind-arm-common.inc: Replace uses of gnu_Unwind_Find_got with
_Unwind_gnu_Find_got.
* unwind-pe.h: Likewise.
As the following testcase shows, unwind.h on ARM can't be (starting with GCC
10) compiled with -std=c* modes, only -std=gnu* modes.
The problem is it uses asm keyword, which isn't a keyword in those modes
(system headers vs. non-system ones don't make a difference here).
glibc and other installed headers use __asm or __asm__ keywords instead that
work fine in both standard and gnu modes.
While there, as it is an installed header, I think it is also wrong to
completely ignore any identifier namespace rules.
The generic unwind.h defines just _Unwind* namespace identifiers plus
_sleb128_t/_uleb128_t (but e.g. unlike libstdc++/glibc headers doesn't
uglify operand names), the ARM unwind.h is much worse here. I've just
changed the gnu_Unwind_Find_got function at least not be in user identifier
namespace, but perhaps it would be good to go further and rename e.g.
or e.g.
typedef _Unwind_Reason_Code (*personality_routine) (_Unwind_State,
_Unwind_Control_Block *, _Unwind_Context *);
in unwind-arm-common.h.
2020-02-07 Jakub Jelinek <jakub@redhat.com>
PR target/93615
* config/arm/unwind-arm.h (gnu_Unwind_Find_got): Rename to ...
(_Unwind_gnu_Find_got): ... this. Use __asm instead of asm. Remove
trailing :s in asm. Formatting fixes.
(_Unwind_decode_typeinfo_ptr): Adjust caller.
* gcc.dg/pr93615.c: New test.
On nios2-linux-gnu, there has been a long-standing bug in C++ exception
handling that sometimes resulted in link errors like
../nios2-linux-gnu/bin/ld: FDE encoding in /tmp/cccfpQ2l.o(.eh_frame) prevents .eh_frame_hdr table being created
when building some shared libraries or PIE executables. The root of
the problem is that GCC was incorrectly emitting an absolute encoding
in EH tables for PIC. This patch changes it to use either
DW_EH_PE_indirect (for global) or DW_EH_PE_datarel (for local), and
fixes libgcc so it can find the address of the GOT as the base address
for DW_EH_PE_datarel.
Complicating matters somewhat, GAS was missing support for
%gotoff(symbol) relocation syntax. I have just pushed a fix for that,
but I've added a configure check to test for presence of the binutils
support and fall back to the current absolute encoding (which works
most of the time) if it is not available. Once the fix makes it into
an official binutils release it might be appropriate to make this
error out instead.
Since this is a wrong-code bug and affects only nios2 target, I think
this is appropriate for Stage 4. I regression-tested on both
nios2-linux-gnu and nios2-elf, with and without the binutils support
present, before committing this.
2020-01-31 Sandra Loosemore <sandra@codesourcery.com>
gcc/
* configure.ac [nios2-*-*]: Check HAVE_AS_NIOS2_GOTOFF_RELOCATION.
* config.in: Regenerated.
* configure: Regenerated.
* config/nios2/nios2.h (ASM_PREFERRED_EH_DATA_FORMAT): Fix handling
for PIC when HAVE_AS_NIOS2_GOTOFF_RELOCATION.
(ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX): New.
gcc/testsuite/
* g++.target/nios2/hello-pie.C: New.
* g++.target/nios2/nios2.exp: New.
libgcc/
* config.host [nios2-*-linux*] (tmake_file, tm_file): Adjust.
* config/nios2-elf-lib.h: New.
* unwind-dw2-fde-dip.c (_Unwind_IteratePhdrCallback): Use existing
code for finding GOT base for nios2.
ARC processors can work with a reduced register set (i.e. registers
r4-r9 and r16-r25 are not available). This option can be enabled
passing -mrf16 option to the compiler, or by using -mcpu=em_mini CPU
configuration. Using RF16 config requires all the hand-made assembly
files used in libgcc to have the corresponding RF16 object attribute
set.
This patch qualifies the relevant hand-made assembly files to
RF16 config, and also adds generic c-functions for the one which are
not.
libgcc/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/crti.S: Add RF16 object attribute.
* config/arc/crtn.S: Likewise.
* config/arc/crttls.S: Likewise.
* config/arc/lib1funcs.S: Likewise.
* config/arc/fp-hack.h (ARC_OPTFPE): Define.
* config/arc/lib2funcs.c: New file.
* config/arc/t-arc: Add lib2funcs to LIB2ADD.
libgcc/ChangeLog:
2020-01-23 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
* config/mips/gnustack.h: Check for TARGET_LIBC_GNUSTACK also.
gcc/ChangeLog:
2020-01-23 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
* config.in: Regenerated.
* config/mips/linux.h (NEED_INDICATE_EXEC_STACK): Define to 1
for TARGET_LIBC_GNUSTACK.
* configure: Regenerated.
* configure.ac: Define TARGET_LIBC_GNUSTACK if glibc version is
found to be 2.31 or greater.
PR tree-optimization/92924
* libgcov-profiler.c (__gcov_topn_values_profiler_body): First
try to find an existing value, then find an empty slot
if not found.
PR tree-optimization/92924
* profile.c (compute_value_histograms): Divide
all counter values.
PR tree-optimization/92924
* libgcov-driver.c (prune_topn_counter): New.
(prune_counters): Likewise.
(dump_one_gcov): Prune a run-time counter.
* libgcov-profiler.c (__gcov_topn_values_profiler_body):
For a known value, add GCOV_TOPN_VALUES to value.
Otherwise, decrement all counters by one.
* config/cris/arit.c (DS): Apply attribute fallthrough.
Without this, there are, for each compilation of arit.c, 30ish
occurrences of "this statement may fall through
[-Wimplicit-fallthrough=]", for lines that look like
case 32: DS; case 31: DS; case 30: DS; case 29: DS;
This patch is part of a patch series to add support for Armv8.1-M
Mainline Security Extensions architecture.
Code to detect whether cmse.c can be buit with -mcmse checks the output
of host GCC when invoked with -mcmse. However, an error from the
compiler does not prevent some minimal output so this always holds true.
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/t-arm: Check return value of gcc rather than lack of
output.
This changes introduces an internal API for VxWorks version checks
within runtime files, a prerequisite to a few fixes coming up for libstdc++
builds on more recent versions of the OS.
2019-12-30 Olivier Hainque <hainque@adacore.com>
gcc/
* config/vxworks/_vxworks-versions.h: New file.
* config.gcc (*-*-vxworks*): Add it to extra_headers.
libgcc/
* config/gthr-vxworks.h: Use _vxworks-versions.h.
* config/gthr-vxworks-tls.c: Likewise.
From-SVN: r279783
contrib/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-list.mk: Add msp430-elfbare.
gcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.gcc: s/msp430*-*-*/msp430-*-*.
Handle msp430-*-elfbare.
* config/msp430/msp430-devices.c (TARGET_SUBDIR): Define.
(_MSPMKSTR): Define.
(__MSPMKSTR): Define.
(rest_of_devices_path): Use TARGET_SUBDIR value in string.
* config/msp430/msp430.c (msp430_option_override): Error if
-fuse-cxa-atexit is used when it has been disabled at configure time.
* config/msp430/t-msp430: Define TARGET_SUBDIR when building
msp430-devices.o.
* doc/install.texi: Document msp430-*-elf and msp430-*-elfbare.
* doc/invoke.texi: Update documentation about which path devices.csv is
searched for.
gcc/testsuite/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* g++.dg/init/dso_handle1.C: Require cxa_atexit support.
* g++.dg/init/dso_handle2.C: Likewise.
* g++.dg/other/cxa-atexit1.C: Likewise.
* gcc.target/msp430/msp430.exp: Update csv-using-installed.c test to
handle msp430-elfbare configuration.
libgcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: s/msp430*-*-elf/msp430-*-elf*.
Override default "extra_parts" variable.
* configure: Regenerate.
* configure.ac: Disable TM clone registry by default for
msp430-elfbare.
From-SVN: r279442
ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-ml.in (msp430-*-*): Support --disable-no-exceptions configure
flag.
gcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.h (STARTFILE_SPEC) [!fexceptions]: Use
crtbegin_no_eh.o if building for the C language.
[fno-exceptions]: Use crtbegin_no_eh.o if building for any language
except C.
(ENDFILE_SPEC) [!fexceptions]: Use crtend_no_eh.o if building for
the C language.
[fno-exceptions]: Use crtend_no_eh.o if building for any language
except C.
* config/msp430/t-msp430: Add -fno-exceptions multilib.
* doc/install.texi: Document --disable-no-exceptions multilib configure
option.
* doc/sourcebuild.texi: Document exceptions_enabled effective target.
gcc/testsuite/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* lib/gcc-dg.exp: Add dg-prune messages for when exception handling is
disabled.
* lib/target-supports.exp (check_effective_target_exceptions_enabled):
New.
libgcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: Add crt{begin,end}_no_eh.o to "extra_parts".
* config.host (msp430*-*-elf): Add crt{begin,end}_no_eh.o to
"extra_parts".
From-SVN: r279246
2019-12-09 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* crtstuff.c (__do_global_dtors_aux): Check if USE_EH_FRAME_REGISTRY is
defined instead of its value.
From-SVN: r279125
2019-12-09 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* crtstuff.c (__do_global_dtors_aux): Wrap in #if so it's only defined
if it will have contents.
From-SVN: r279123
The gthr weak reference based single thread detection is unsafe with
static linking and in case of dynamic linking it's ineffective on musl
since pthread symbols are defined in libc.so.
(Ideally this should be fixed for all targets, since glibc plans to move
libpthread.so into libc.so too and users want to static link to pthread
without --whole-archive: PR87189.)
For now we have to explicitly opt out from the broken behaviour in the
config machinery of each target lib and libgcc was previously missed.
libgcc/ChangeLog:
2019-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config.host: Add t-gthr-noweak on *-*-musl*.
* config/t-gthr-noweak: New file.
From-SVN: r278399
Add the dynamic linker name and fix a type name to use the public name
instead of the glibc internal name.
gcc/ChangeLog:
2019-11-15 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/m68k/linux.h (MUSL_DYNAMIC_LINKER): Define.
libgcc/ChangeLog:
2019-11-15 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/m68k/linux-unwind.h (struct uw_ucontext): Use sigset_t instead
of __sigset_t.
From-SVN: r278312
2019-11-13 Jerome Lambourg <lambourg@adacore.com>
Doug Rupp <rupp@adacore.com>
Olivier Hainque <hainque@adacore.com>
gcc/
* config.gcc: Collapse the arm-vxworks entries into
a single arm-wrs-vxworks7* one, bpabi based. Update
the default cpu from arm8 to armv7-a
* config/arm/vxworks.h (CC1_SPEC): Simplify, knowing that
we always use ARM_UNWIND_INFO.
(DWARF2_UNWIND_INFO): Remove redefinition.
(ARM_TARGET2_DWARF_FORMAT): Likewise.
(VXWORKS_PERSONALITY): Define, to "llvm".
(VXWORKS_EXTRA_LIBS_RTP): Define, to "-lllvm".
libgcc/
* config.host: Collapse the arm-vxworks entries into
a single arm-wrs-vxworks7* one.
* config/arm/unwind-arm-vxworks.c: Update comments. Provide
__gnu_Unwind_Find_exidx and a weak dummy __cxa_type_match for
kernel modules, to be overriden by libstdc++ when we link with
it. Rely on externally provided __exidx_start/end.
Co-Authored-By: Doug Rupp <rupp@adacore.com>
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r278253
2019-11-12 Olivier Hainque <hainque@adacore.com>
libgcc/
* config/t-gthr-vxworksae: New file, add all the gthr-vxworks
sources except the cxx0x support to LIB2ADDEH. We don't support
cxx0x on AE/653.
* config/t-vxworksae: New file.
* config.host: Handle *-*-vxworksae: Add the two aforementioned
Makefile fragment files at their expected position in the tmake_file
list, in accordance with what is done for other VxWorks variants.
From-SVN: r278250
2019-11-12 Corentin Gay <gay@adacore.com>
Jerome Lambourg <lambourg@adacore.com>
Olivier Hainque <hainque@adacore.com>
libgcc/
* config/t-gthr-vxworks: New file, add all the gthr-vxworks
sources to LIB2ADDEH.
* config/t-vxworks: Remove adjustments to LIB2ADDEH.
* config/t-vxworks7: Likewise.
* config.host: Append a block at the end of the file to add the
t-gthr files to the tmake_file list for VxWorks after everything
else.
* config/vxlib.c: Rename as gthr-vxworks.c.
* config/vxlib-tls.c: Rename as gthr-vxworks-tls.c.
* config/gthr-vxworks.h: Simplify a few comments. Expose a TAS
API and a basic error checking API, both internal. Simplify the
__gthread_once_t type definition and initializers. Add sections
for condition variables support and for the C++0x thread support,
conditioned against Vx653 for the latter.
* config/gthr-vxworks.c (__gthread_once): Simplify comments and
implementation, leveraging the TAS internal API.
* config/gthr-vxworks-tls.c: Introduce an internal TLS data access
API, leveraging the general availability of TLS services in VxWorks7
post SR6xxx.
(__gthread_setspecific, __gthread_setspecific): Use it.
(tls_delete_hook): Likewise, and simplify the enter/leave dtor logic.
* config/gthr-vxworks-cond.c: New file. GTHREAD_COND variable
support based on VxWorks primitives.
* config/gthr-vxworks-thread.c: New file. GTHREAD_CXX0X support
based on VxWorks primitives.
Co-Authored-By: Jerome Lambourg <lambourg@adacore.com>
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r278249
2019-11-06 Jerome Lambourg <lambourg@adacore.com>
Olivier Hainque <hainque@adacore.com>
libgcc/
* config/vxcrtstuff.c: New file.
* config/t-vxcrtstuff: New Makefile fragment.
* config.host: Append t-vxcrtstuff to the tmake_file list
on all VxWorks ports using dwarf for table based EH.
gcc/
* config/vx-common.h (USE_TM_CLONE_REGISTRY): Remove
definition, pointless with a VxWorks specific version
of crtstuff.
(DWARF2_UNWIND_INFO): Conditionalize on !ARM_UNWIND_INFO.
* config/vxworks.h (VX_CRTBEGIN_SPEC, VX_CRTEND_SPEC):
New local macros, controlling the addition of vxworks specific
crtstuff objects depending on the EH mechanism and kind of
module being linked.
(VXWORKS_STARTFILE_SPEC, VXWORKS_ENDFILE_SPEC): Use them.
Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r278248
gcc/
Support 64-bit double and 64-bit long double configurations.
PR target/92055
* config.gcc (tm_defines) [avr]: Set from --with-double=,
--with-long-double=.
* config/avr/t-multilib: Remove.
* config/avr/t-avr: Output of genmultilib.awk is now fully
dynamically generated and no more part of the repo.
(HAVE_DOUBLE_MULTILIB, HAVE_LONG_DOUBLE_MULTILIB): New variables.
Pass them down to...
* config/avr/genmultilib.awk: ...here and handle them.
* gcc/config/avr/avr.opt (-mdouble=, avr_double). New option and var.
(-mlong-double=, avr_long_double). New option and var.
* common/config/avr/avr-common.c (opts.h, diagnostic.h): Include.
(TARGET_OPTION_OPTIMIZATION_TABLE) <-mdouble=, -mlong-double=>:
Set default as requested by --with-double=
(TARGET_HANDLE_OPTION): Define to this...
(avr_handle_option): ...new hook worker.
* config/avr/avr.h (DOUBLE_TYPE_SIZE): Define to avr_double.
(LONG_DOUBLE_TYPE_SIZE): Define to avr_long_double.
(avr_double_lib): New proto for spec function.
(EXTRA_SPEC_FUNCTIONS) <double-lib>: Add.
(DRIVER_SELF_SPECS): Call %:double-lib.
* config/avr/avr.c (avr_option_override): Assert
sizeof(long double) >= sizeof(double) for the target.
* config/avr/avr-c.c (avr_cpu_cpp_builtins)
[__HAVE_DOUBLE_MULTILIB__, __HAVE_LONG_DOUBLE_MULTILIB__]
[__HAVE_DOUBLE64__, __HAVE_DOUBLE32__, __DEFAULT_DOUBLE__=]
[__HAVE_LONG_DOUBLE64__, __HAVE_LONG_DOUBLE32__]
[__HAVE_LONG_DOUBLE_IS_DOUBLE__, __DEFAULT_LONG_DOUBLE__=]:
New built-in define depending on --with-double=, --with-long-double=.
* config/avr/driver-avr.c (avr_double_lib): New spec function.
* doc/invoke.tex (AVR Options) <-mdouble=,-mlong-double=>: Doc.
* doc/install.texi (Cross-Compiler-Specific Options)
<--with-double=, --with-long-double=>: Doc.
libgcc/
Support 64-bit double and 64-bit long double configurations.
PR target/92055
* config/avr/t-avr (HOST_LIBGCC2_CFLAGS): Only add -DF=SF if
long double is a 32-bit type.
* config/avr/t-avrlibc: Copy double64 and long-double64
multilib(s) from the vanilla one.
* config/avr/t-copy-libgcc: New Makefile snip.
From-SVN: r277908
2019-11-04 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* crtstuff.c: Define USE_TM_CLONE_REGISTRY to 0 if it's undefined and
the target output object format is not ELF.
s/defined(USE_TM_CLONE_REGISTRY)/USE_TM_CLONE_REGISTRY.
From-SVN: r277775
Using -mno-fdiv gives linker errors unless we build the missing divide
routines in libgcc always. There is at least one university project
designing RISC-V parts without FP divide that wants to use the option.
libgcc/
* config/riscv/t-softfp32 (softfp_extra): Add FP divide routines
From-SVN: r277723
* config/pa/fptr.c (_dl_read_access_allowed): Change argument to
unsigned int. Adjust callers.
(__canonicalize_funcptr_for_compare): Change plabel type to volatile
unsigned int *. Load relocation offset before function pointer.
Add barrier to ensure ordering.
From-SVN: r277015
* config/pa/lib2funcs.S (__gcc_plt_call): Load branch target to %r21.
Load PIC register after branch target. Fix white space.
* config/pa/milli64.S ($$dyncall): Separate LINUX and non LINUX
implementations. Load PIC register after branch target. Don't
clobber function pointer when it points to function descriptor.
Use nullification instead of branch in LINUX implementation.
From-SVN: r276925
The DCache clean & ICache invalidation requirements for instructions
to be data coherence are discoverable through new fields in CTR_EL0.
Let's support the two bits if they are enabled, the CPU core will
not execute the unnecessary DCache clean or Icache Invalidation
instructions.
2019-09-25 Shaokun Zhang <zhangshaokun@hisilicon.com>
* config/aarch64/sync-cache.c (__aarch64_sync_cache_range): Add support for
CTR_EL0.IDC and CTR_EL0.DIC.
From-SVN: r276122
This is causing regressions when mixing with user code compiled in ARM mode.
2019-09-20 Christophe Lyon <christophe.lyon@st.com>
Revert:
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
From-SVN: r276001
This is the libgcc part of the interface -- providing the functions.
Rationale is provided at the top of libgcc/config/aarch64/lse.S.
* config/aarch64/lse-init.c: New file.
* config/aarch64/lse.S: New file.
* config/aarch64/t-lse: New file.
* config.host: Add t-lse to all aarch64 tuples.
From-SVN: r275967
Without this, when we are unwinding across a signal frame we can jump
to an even address which leads to an exception.
This is needed in __gnu_persnality_sigframe_fdpic() when restoring the
PC from the signal frame since the PC saved by the kernel has the LSB
bit set to zero.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275575
The main difference with existing support is that function addresses
are function descriptor addresses instead. This means that all code
dealing with function pointers now has to cope with function
descriptors instead.
For the same reason, Linux kernel helpers can no longer be called by
dereferencing their address, so we implement wrappers that directly
call the kernel helpers.
When restoring a function address, we also have to restore the FDPIC
register value (r9).
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* ginclude/unwind-arm-common.h (unwinder_cache): Add reserved5
field.
libgcc/
* config/arm/linux-atomic.c (__kernel_cmpxchg): Add FDPIC support.
(__kernel_dmb): Likewise.
(__fdpic_cmpxchg): New function.
(__fdpic_dmb): New function.
* config/arm/unwind-arm.h (FDPIC_REGNUM): New define.
(gnu_Unwind_Find_got): New function.
(_Unwind_decode_typeinfo_ptr): Add FDPIC support.
* unwind-arm-common.inc (UCB_PR_GOT): New.
(funcdesc_t): New struct.
(get_eit_entry): Add FDPIC support.
(unwind_phase2): Likewise.
(unwind_phase2_forced): Likewise.
(__gnu_Unwind_RaiseException): Likewise.
(__gnu_Unwind_Resume): Likewise.
(__gnu_Unwind_Backtrace): Likewise.
* unwind-pe.h (read_encoded_value_with_base): Likewise.
libstdc++/
* libsupc++/eh_personality.cc (get_ttype_entry): Add FDPIC
support.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275568
In FDPIC, we need to make sure __do_global_dtors_aux and frame_dummy
are referenced by their address, not by pointers to the function
descriptors.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* libgcc/crtstuff.c: Add support for FDPIC.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275567
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
This re-enables -msave-restore for shared libraries, and uses the
t-slibgcc-libgcc file to get the save-restore routines included directly
in shared libraries so that we don't need to indirect through the PLT
to reach them, which doesn't work.
gcc/
* config/riscv/riscv.c (riscv_option_override): Revert 2019-08-30
change.
libgcc/
* config.host (riscv*-*-linux*): Add t-slibgcc-libgcc to tmake_file.
(riscv*-*-freebsd*): Likewise.
From-SVN: r275478
gcc/ChangeLog:
* config.gcc (hppa*-*-netbsd*): New target.
* config/pa/pa-netbsd.h: New file.
* config/pa/pa32-netbsd.h: New file.
libgcc/ChangeLog:
* config.host (hppa*-*-netbsd*): New case.
* config/pa/t-netbsd: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <nick@nthcliff.demon.co.uk>
From-SVN: r273933
At present it is possible to call the CMSE functions for checking
addresses (such as cmse_check_address_range) and forget to check/use
the return value. This patch makes the interfaces more robust against
programmer error by marking these functions with the warn_unused_result
attribute. With this set, any use of these functions that does not use
the result will produce a warning.
This produces a warning on default warn levels when the result of the
cmse functions is not used.
For the following function:
void foo()
{
int *data;
cmse_check_address_range((int*)data, 0, 0);
}
The following warning is emitted:
warning: ignoring return value of 'cmse_check_address_range' declared
with attribute 'warn_unused_result' [-Wunused-result]
6 | cmse_check_address_range((int*)data, 0, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc/ChangeLog:
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* config/arm/arm_cmse.h (cmse_nonsecure_caller): Add
warn_unused_result attribute.
(cmse_check_address_range): Add warn_unused_result attribute.
libgcc/ChangeLog:
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* config/arm/cmse.c (cmse_check_address_range): Add
warn_unused_result attribute.
2019-07-31 Joel Hutton <Joel.Hutton@arm.com>
* gcc.target/arm/cmse/cmse-17.c: New test.
From-SVN: r273924
2019-07-22 Martin Liska <mliska@suse.cz>
* config/avr/avr.c (avr_asm_output_aligned_decl_common): Update
comment.
* toplev.c (compile_file): Do not emit __gnu_lto_v1 symbol.
2019-07-22 Martin Liska <mliska@suse.cz>
* config/pa/stublib.c: Remove stub symbol __gnu_lto_v1.
* config/pa/t-stublib: Likewise.
2019-07-22 Martin Liska <mliska@suse.cz>
* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Do not search for gnu_lto_v1, but search for first '\0'.
From-SVN: r273662
Fixes bad assembly logic with software divide as reported by Richard Selvaggi.
Also, add a basic test to verify the soft math works when enabled.
gcc/testsuite/ChangeLog:
PR target/90362
* gcc.target/or1k/div-mul-3.c: New test.
libgcc/ChangeLog:
PR target/90362
* config/or1k/lib1funcs.S (__udivsi3): Change l.sfeqi
to l.sfeq and l.sfltsi to l.sflts equivalents as the immediate
instructions are not available on every processor. Change a
l.bnf to l.bf to fix logic issue.
From-SVN: r273648
t-darwin8 is nolonger needed (or present) for pre-10.4 powerpc, so remove
the reference.
2019-07-04 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Remove reference to t-darwin8.
From-SVN: r273091
The library handling and some of the options for creating the crts for
the older PPC Darwin versions had bit-rotted somewhat. This adjusts the
build criteria for the crts to avoid newer ld64 versions warnings about
mismatches in build and object versions.
Added to some of the comments that it's documented why the specs are as
they are.
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
gcc/
* config/darwin.h (REAL_LIBGCC_SPEC): Adjust for earlier Darwin.
(STARTFILE_SPEC): Split crt3 into a separate spec.
(DARWIN_EXTRA_SPECS): Add crt2 and crt3 spec.
(DARWIN_CRT2_SPEC): New.
(DARWIN_CRT3_SPEC): New.
(MIN_LD64_OMIT_STUBS): Revise to 62.1.
* config/rs6000/darwin.h (DARWIN_CRT2_SPEC): Revise conditions.
(DARWIN_CRT3_SPEC): New.
libgcc/
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
* config.host (powerpc-*-darwin*,powerpc64-*-darwin*): Revise crt
list.
* config/rs6000/t-darwin: Build crt3_2 for older systems. Revise
mmacosx-version-min for crts to run across all system versions.
* config/rs6000/t-darwin64 (LIB2ADD): Remove.
* config/t-darwin: Revise mmacosx-version-min for crts to run across
system versions >= 10.4.
From-SVN: r273016
2019-07-03 Martin Liska <mliska@suse.cz>
* gcc.dg/tree-prof/val-prof-2.c: Update scanned pattern
as we do now better.
2019-07-03 Martin Liska <mliska@suse.cz>
* libgcov-merge.c (merge_single_value_set): Support N values.
* libgcov-profiler.c (__gcov_one_value_profiler_body): Likewise.
From-SVN: r273004
From the last commit.
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Add libef_ppc.a to the extra files for powerpc-darwin.
From-SVN: r272660
We have been including this in libgcc, which means that we have to append
-lgcc even when using shared libgcc. In preparation for revision of libgcc
split this into an endfile.
gcc/
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (ENDFILE_SPEC): New.
libgcc/
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Add libef_ppc.a to the extra files for powerpc-darwin.
* config/rs6000/t-darwin: (PPC_ENDFILE_SRC, PPC_ENDFILE_OBJS): New.
Build objects for the out of line save/restore register functions
so that they can be used for any supported Darwin version.
* config/t-darwin: Default the build Darwin version to Darwin8
(MacOS 10.4).
From-SVN: r272659
2019-06-25 Martin Liska <mliska@suse.cz>
* libgcov-driver-system.c (replace_filename_variables): Do not
call strlen with NULL argument.
From-SVN: r272650
Atm we see:
...
libgcc/config/nvptx/crt0.c:36:1: warning: no previous prototype for \
‘__main’ [-Wmissing-prototypes]
...
Fix this by adding the prototype.
Build and reg-tested on nvptx.
Build and reg-tested on x86_64 with nvptx accelerator.
2019-06-18 Tom de Vries <tdevries@suse.de>
* config/nvptx/crt0.c (__main): Declare.
From-SVN: r272412
gcc/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_expand_helper): Setup arguments which
describe how to perform MSPABI compliant 64-bit shift.
* config/msp430/msp430.md (ashldi3): New define_expand.
(ashrdi3): New define_expand.
(lshrdi3): New define_expand.
libgcc/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/slli.S (__mspabi_sllll): New library function for
performing a logical left shift of a 64-bit value.
* config/msp430/srai.S (__mspabi_srall): New library function for
performing a arithmetic right shift of a 64-bit value.
* config/msp430/srll.S (__mspabi_srlll): New library function for
performing a logical right shift of a 64-bit value.
gcc/testsuite/ChangeLog:
2019-06-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* gcc.target/msp430/mspabi_sllll.c: New test.
* gcc.target/msp430/mspabi_srall.c: New test.
* gcc.target/msp430/mspabi_srlll.c: New test.
* gcc.c-torture/execute/shiftdi-2.c: New test.
From-SVN: r272360
This is a roll-up of a set of changes needed to support the Arm EABI on NetBSD.
2019-06-14 Matt Thomas <matt@3am-software.com>
Matthew Green <mrg@eterna.com.au>
Nick Hudson <skrll@netbsd.org>
Maya Rashish <coypu@sdf.org>
Richard Earnshaw <rearnsha@arm.com>
gcc:
* config.gcc (arm*-*-netbsdelf*) Add support for EABI configuration.
* config.host (arm*-*-netbsd*): Use driver-arm.o on native NetBSD.
* config/arm/netbsd-eabi.h: New file.
* config/arm/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Undefine before
redefining.
(SUBTARGET_EXTRA_ASM_SPEC): Don't pass -matpcs to the assembler.
* config/netbsd-elf.h (NETBSD_LINK_LD_ELF_SO_SPEC): New define.
(NETBSD_SUBTARGET_EXTRA_SPECS): New define.
(SUBTARGET_EXTRA_SPECS): Define to NETBSD_SUBTARGET_EXTRA_SPECS.
libatomic:
* configure.tgt (arm*): Handle NetBSD in the same way as FreeBSD.
libgcc:
* config.host (arm*-*-netbsdelf*): Add support for EABI configurations.
* config/arm/t-netbsd (LIB1ASMFUNCS): Add some additional assembler
functions to build.
* config/arm/t-netbsd-eabi: New file.
Co-Authored-By: Matthew Green <mrg@eterna.com.au>
Co-Authored-By: Maya Rashish <coypu@sdf.org>
Co-Authored-By: Nick Hudson <skrll@netbsd.org>
Co-Authored-By: Richard Earnshaw <rearnsha@arm.com>
From-SVN: r272290
libgcc/ChangeLog:
2019-06-12 Dimitar Dimitrov <dimitar@dinux.eu>
* config.host: Add PRU target.
* config/pru/asri.c: New file.
* config/pru/eqd.c: New file.
* config/pru/eqf.c: New file.
* config/pru/ged.c: New file.
* config/pru/gef.c: New file.
* config/pru/gtd.c: New file.
* config/pru/gtf.c: New file.
* config/pru/led.c: New file.
* config/pru/lef.c: New file.
* config/pru/lib2bitcountHI.c: New file.
* config/pru/lib2divHI.c: New file.
* config/pru/lib2divQI.c: New file.
* config/pru/lib2divSI.c: New file.
* config/pru/libgcc-eabi.ver: New file.
* config/pru/ltd.c: New file.
* config/pru/ltf.c: New file.
* config/pru/mpyll.S: New file.
* config/pru/pru-abi.h: New file.
* config/pru/pru-asm.h: New file.
* config/pru/pru-divmod.h: New file.
* config/pru/sfp-machine.h: New file.
* config/pru/t-pru: New file.
From-SVN: r272204
