* gcc-changelog/git_commit.py: Add trailing '/'
for libdruntime. Allow empty changelog for
only ignored files.
* gcc-changelog/test_email.py: New test for go
patch in ignored location.
* gcc-changelog/test_patches.txt: Add test.
2020-05-22 Jakub Jelinek <jakub@redhat.com>
* gcc-changelog/git_commit.py: Add trailing / to
gcc/testsuite/go.test/test and replace gcc/go/frontend/
with gcc/go/gofrontend/ in ignored locations.
* gcc-changelog/git_commit.py: Add author_tuple
only if not present in author_lines.
* gcc-changelog/test_email.py: New test.
* gcc-changelog/test_patches.txt: Add new patch.
* gcc-changelog/git_commit.py: Refactor to make flake8 happy.
* gcc-changelog/test_email.py: Add new test.
* gcc-changelog/test_patches.txt: Add new patch.
git-check-commit.py does not know about "Reviewed-by",
"Reviewed-on", and "Signed-off-by" lines and hence it
expects those lines which follow the ChangeLog entries
to be indented by a tab.
This commit makes the script skip those lines. No further
processing is attempted because the review information
is not part of the ChangeLogs.
contrib/
2020-05-20 Frederik Harwath <frederik@codesourcery.com>
* gcc-changelog/git_commit.py: Skip over lines starting
with "Reviewed-by: ", "Reviewed-on: ", or "Signed-off-by: "
* gcc-changelog/git_commit.py: Support cherry pick
prefix.
* gcc-changelog/test_email.py: Test it.
* gcc-changelog/test_patches.txt: Add new patch.
* gcc-git-customization.sh: Add gcc-backport.
contrib/ChangeLog:
2020-05-15 Martin Liska <mliska@suse.cz>
* gcc-git-customization.sh: Add
alias.gcc-mklog new hook.
* mklog.py: New file.
* test_mklog.py: New file.
This commit is for the benefit of GDB, but as the binutils-gdb
repository shares the contrib/ directory with gcc, this commit must
first be applied to gcc then copied back to binutils-gdb.
This commit extends the two scripts contrib/dg-extract-results.{py,sh}
to handle some new, GDB specific test result types. These test
results types should never appear in GCC, or any other tool that
shares the contrib/ directly, so this change should be harmless.
In this patch series:
https://sourceware.org/pipermail/gdb-patches/2020-April/167847.html
changes were made in GDB's use of Dejagnu so that two additional
conditions could be detected, these are:
1. Test names that contain either the build or source paths. Such
test names make it difficult to compare the results of two test runs
of GDB from two different directories, and
2. Duplicate test names. Duplicates make it difficult to track down
exactly which test has failed.
When running Dejagnu on GDB we can now (sometimes) see two additional
test result types matching the above conditions, these are '# of paths
in test names' and '# of duplicate test names'.
If the test is run in parallel mode (make -j...) then these extra test
results will appear in the individual test summary files, but are not
merged into the final summary file.
Additionally, within the summary file there are now two new types of
test summary line, these are 'PATH: ...' and 'DUPLICATE: ...', these
allow users to quickly search the test summary to track down where the
offending test names are. These lines are similarly not merged into
the unified gdb.sum file after a parallel test run.
This commit extends the dg-extract-results.* scripts to calculate the
totals for the two new result types, and to copy the new test summary
lines into the unified summary file.
contrib/ChangeLog:
* dg-extract-results.py: Handle GDB specific test types.
* dg-extract-results.sh: Likewise.
* gcc-changelog/git_check_commit.py: New file.
* gcc-changelog/git_commit.py: New file.
* gcc-changelog/git_email.py: New file.
* gcc-changelog/git_repository.py: New file.
* gcc-changelog/git_update_version.py: New file.
As Iain reported, my change broke the case when one has bison >= 3,
but make decides there is no reason to regenerate plural.c, unfortunately
that seems to be a scenario I haven't tested. The problem is that
the pregenerated plural.c has been generated with bison 1.35, but when
config.h says HAVE_BISON3, the code assumes it is the bison3 variant.
What used to work fine is when one has bison >= 3 and plural.c has been
regenerated (e.g. do touch intl/plural.y and it will work), or when
one doesn't have any bison (then nothing is regenerated, but HAVE_BISON3
isn't defined either), or when one has bison < 3 and doesn't need to
regenerate, or when one has bison < 3 and it is regenerated.
The following patch fixes this, by killing the HAVE_BISON3 macro from
config.h, and instead remembering the fact whether plural.c has been created
with bison < 3 or bison >= 3 in a separate new plural-config.h header.
The way this works:
- user doesn't have bison
- user has bison >= 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y
- user has bison < 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y
pregenerated !USE_BISON3 plural.c and plural-config.h from source
dir is used, nothing in the objdir
- user has bison >= 3 and intl/plural.y is newer
Makefile generates plural.c and USE_BISON3 plural-config.h in the
objdir, which is then used in preference to srcdir copies
- user has bison < 3 and intl/plural.y is newer
Makefile generates plural.c and !USE_BISON3 plural-config.h in the
objdir, which is then used in preference to srcdir copies
I have tested all these cases and make all-yes worked in all the cases.
If one uses the unsupported ./configure where srcdir == objdir, I guess
(though haven't tested) that it should still work, just it would be nice
if such people didn't try to check in the plural{.c,-config.h} they have
regenerated.
What doesn't work, but didn't work before either (just tested gcc-9 branch
too) is when one doesn't have bison and plural.y is newer than plural.c.
Don't do that ;)
2020-04-16 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/92008
intl/
* configure.ac: Remove HAVE_BISON3 AC_DEFINE.
* Makefile.in (HEADERS): Add plural-config.h.
(.y.c): Also create plural-config.h.
(dcigettext.o loadmsgcat.o plural.o plural-exp.o): Also depend
on plural-config.h.
(plural-config.h): Depend on plural.c.
* plural-exp.h: Include plural-config.h. Use USE_BISON3 instead
of HAVE_BISON3.
* plural.y: Use USE_BISON3 instead of HAVE_BISON3.
* configure: Regenerated.
* plural.c: Regenerated.
* config.h.in: Regenerated.
* plural-config.h: Generated.
contrib/
* gcc_update: Add intl/plural.y dependency for intl/plural-config.h.
Whilst trying to convert the add vendor branch script to work with
personal branches I encountered a minor issue where git would report
ambiguous refs when checking out the new branch.
It turns out that this is because git considers <me>/<topic> to be
ambiguous if both
refs/heads/<me>/<topic>
and
refs/remotes/<me>/<topic>
exist in the list of known branches.
Having thought about this a bit, I think the best solution is to adopt
something more like the vendors space and call the remote users/<me>
(this also works better if you want to set up remotes to track other
users branches as well).
So this patch has two parts.
1) It updates gcc-git-customization.sh to set up the new 'remote' and
converts any existing remote and branches tracking that to the new
format
2) It adds a new script to set up a personal branch on the gcc git repository.
* gcc-git-customization.sh: Use users/<pfx> for the personal remote
rather than just <pfx>. Convert any existing personal branches to the
new remote.
* git-add-user-branch.sh: New file.
This script is intended to create a new vendor branch. Doing so is
not completely obvious if you are not familiar with the upstream
structure, so this takes the pain out of getting it right.
It doesn't check out the branch locally, but does set everything up so
that, if you have push enabled for your vendor branches, then
git push vendors/<vendor> <branch>
will work as expected.
Run the script as
contrib/git-add-vendor-branch.sh <vendor>/<branch> <start-point>
the <vendor> space must have previously been set up in the way
git-fetch-vendor.sh expects.
* git-add-vendor-branch.sh: New file.
The initial structure for vendor and personal branches makes use of
the default remote (normally origin) for the upstream
repository). Unfortunately, this causes some confusion, especially for
personal branches because a push will not push to the correct upstream
location. This can be 'fixed' by adding a push refspec for the remote,
but that has the unfortunate consequence of breaking the push.default
behaviour for git push, and it becomes too easy to accidentally commit
something unintended to the main parts of the repository.
To work around this, this patch changes the configuration to use
separate 'remotes' for these additional refs, with one remote for the
personal space and another remote for each vendor's space. The
personal space is called after the user's preferred branch-space
prefix (default 'me'), the vendor spaces are called
vendors/<vendor-name>.
As far as possible, I've made the script automatically restructure any
existing fetch or push lines that earlier versions of the scripts may
have created - the gcc-git-customization.sh script will convert all
vendor refs that it can find, so it is not necessary to re-add any
vendors you've already added.
You might, however, want to run
git remote prune <origin>
after running to clean up any stale upstream-refs that might still be
in your local repo, and then
git fetch vendors/<vendor>
or
git fetch <me>
to re-populate the remotes/ structures.
Also, for any branch you already have that tracks a personal or vendor
branch upstream, you might need to run
git config branch.<name>.remote <new-remote>
so that merges and pushes go to the right place (I haven't attempted
to automate this last part).
For vendors, the new structure means that
git checkout -b <vendor>/<branch> remotes/vendors/<vendor>/<branch>
will correctly set up a remote tracking branch.
Please be aware that if you have multiple personal branches set up, then
git push <me>
will still consider all of them for pushing. If you only want to push
one branch, then either write
git push <me> HEAD
or
git push <me> <me>/branch
as appropriate.
And don't forget '-n' (--dry-run) to see what would be done if this
were not a dry run.
Finally, now that the vendors spaces are isolated from each other and
from the other spaces, I've added an option "--enable-push" to
git-fetch-vendor.sh. If passed, then a "push" spec will be added for
that vendor to enable pushing to the upstream. If you re-run the
script for the same vendor without the option, the push spec will be
removed.
* gcc-git-customization.sh: Check that user-supplied remote
name exists before continuting. Use a separate remotes for the
personal commit area. Convert existing personal and vendor
fetch rules to new layout.
* git-fetch-vendor.sh: New vendor layout. Add --enable-push
option.
Really old git versions (like 1.6.0) require
"git log --pretty=tformat:%p:%t:%H"
or else we see:
Updating GIT tree
Current branch master is up to date.
fatal: invalid --pretty format: %p:%t:%H
Adjusting file timestamps
Touching gcc/config.in...
Touching gcc/config/arm/arm-tune.md...
...and an empty revision in LAST_UPDATED and gcc/REVISION.
In its absence, for newer git versions, "tformat" is the default
qualifier, documented as such default for at least git-2.11.0.
As discussed on IRC, this adds a couple more checks in the
customization setup for git. If the variables user.name and
user.email are not set anywhere in the git config hierarchy, we set
some local values. We always ask about the values we detect and if
the user gives an answer that is new, we save that in the local
config: this gives the opportunity to use different values to those
configured for the global space.
Also cleaned up a couple of minor niggles, such as using $(cmd) rather
than `cmd` for subshells and some quoting issues when using eval.
* gcc-git-customization.sh: Check that user.name and user.email
are set. Use $(cmd) instead of `cmd`. Fix variable quoting when
using eval.
The monotonically increasing revision ids need to be globally unique, so they should
only identify commits that were committed to the upstream repo to its master or
releases/gcc-N branches. The alias could print something even for private branches
or vendor branches etc., but if such an identifier is then used publicly, it will
refer to something else.
2020-01-16 Jakub Jelinek <jakub@redhat.com>
* gcc-git-customization.sh: Verify the id to be printed is ancestor of
the corresponding remote release branch (or master), otherwise print
nothing.
Originally, it seemed like a good idea to add automatic 'push' rules
to the git configuration, so that personal- and vendor-space commits
would automatically push to the right place. Unfortunately, this
changes git's behaviour and with these settings "git push" will try to
push all branches in a local tree up to the corresponding location on
the server (ignoring the push.default setting). The only known
mitigation for this is to ALWAYS use "git push <server> <branch>".
So instead, we no-longer add those rules by default and will document
the options on the wiki. We don't automatically remove the push
entries but do print out the command that will do so, if the user so
wishes.
* gcc-git-customization.sh: Explain why we want the user's
upstream account name. Don't add push rules. Check if push rules
have been added and suggest that they should be removed.
* git-fetch-vendor.sh: Don't add push rules.
When we add a push rule, the default rule gets removed, so add that in
explicitly. This needs to come last since otherwise it would match
the custom redirecting rules we have for personal and vendor
sub-spaces.
I also noticed that the push rule for the vendor subspace still had
a force push default. We don't want that so remove it.
* gcc-git-customization.sh: Add back the default rule that
is lost by adding a custom push rule.
* git-fetch-vendor.sh: Likewise, also remove '+' from push specs.
This simple script is intended to setup a new git configuration to
pull the branches and tags for a specific vendor. This should
simplify some of the steps needed for working with a vendor's
branches.
* git-fetch-vendor.sh: New file.
This patch is intended to help with folks setting up a git work
environment for use with GCC following the transition to git. It
currently does a couple of things.
1) Add an alias 'svn-rev' to git so that you can look up a legacy
commit by its svn revision number. This enables you to type
git svn-rev 1234
and git will show the commit log entry relating to SVN r1234.
2) Sets up tracking information for the user's personal area in
the git repo. It tries to figure out some sensible answers to the
data it needs, but allows the user to override the values. It then
creates the fetch and push entries that are needed for tracking the
extra refs. This implements one part of the recommendations that I've
proposed in svnwrite.html for dealing with private branches.
It should be possible to run the script more than once and for it to
DTRT. If you change your answers the configuration should be
correctly updated.
2020-01-13 Richard Earnshaw <rearnsha@arm.com>
* gcc-git-customization: New file.
contrib/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-list.mk: Add msp430-elfbare.
gcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.gcc: s/msp430*-*-*/msp430-*-*.
Handle msp430-*-elfbare.
* config/msp430/msp430-devices.c (TARGET_SUBDIR): Define.
(_MSPMKSTR): Define.
(__MSPMKSTR): Define.
(rest_of_devices_path): Use TARGET_SUBDIR value in string.
* config/msp430/msp430.c (msp430_option_override): Error if
-fuse-cxa-atexit is used when it has been disabled at configure time.
* config/msp430/t-msp430: Define TARGET_SUBDIR when building
msp430-devices.o.
* doc/install.texi: Document msp430-*-elf and msp430-*-elfbare.
* doc/invoke.texi: Update documentation about which path devices.csv is
searched for.
gcc/testsuite/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* g++.dg/init/dso_handle1.C: Require cxa_atexit support.
* g++.dg/init/dso_handle2.C: Likewise.
* g++.dg/other/cxa-atexit1.C: Likewise.
* gcc.target/msp430/msp430.exp: Update csv-using-installed.c test to
handle msp430-elfbare configuration.
libgcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: s/msp430*-*-elf/msp430-*-elf*.
Override default "extra_parts" variable.
* configure: Regenerate.
* configure.ac: Disable TM clone registry by default for
msp430-elfbare.
From-SVN: r279442
contrib/ChangeLog
2019-12-09 Lewis Hyatt <lhyatt@gmail.com>
PR preprocessor/49973
* unicode/from_glibc/unicode_utils.py: Support script from
glibc (commit 464cd3) to extract character widths from Unicode data
files.
* unicode/from_glibc/utf8_gen.py: Likewise.
* unicode/UnicodeData.txt: Unicode v. 12.1.0 data file.
* unicode/EastAsianWidth.txt: Likewise.
* unicode/PropList.txt: Likewise.
* unicode/gen_wcwidth.py: New utility to generate
libcpp/generated_cpp_wcwidth.h with help from the glibc support
scripts and the Unicode data files.
* unicode/unicode-license.txt: Added.
* unicode/README: New explanatory file.
libcpp/ChangeLog
2019-12-09 Lewis Hyatt <lhyatt@gmail.com>
PR preprocessor/49973
* generated_cpp_wcwidth.h: New file generated by
../contrib/unicode/gen_wcwidth.py, supports new cpp_wcwidth function.
* charset.c (compute_next_display_width): New function to help
implement display columns.
(cpp_byte_column_to_display_column): Likewise.
(cpp_display_column_to_byte_column): Likewise.
(cpp_wcwidth): Likewise.
* include/cpplib.h (cpp_byte_column_to_display_column): Declare.
(cpp_display_column_to_byte_column): Declare.
(cpp_wcwidth): Declare.
(cpp_display_width): New function.
gcc/ChangeLog
2019-12-09 Lewis Hyatt <lhyatt@gmail.com>
PR preprocessor/49973
* input.c (location_compute_display_column): New function to help with
multibyte awareness in diagnostics.
(test_cpp_utf8): New self-test.
(input_c_tests): Call the new test.
* input.h (location_compute_display_column): Declare.
* diagnostic-show-locus.c: Pervasive changes to add multibyte awareness
to all classes and functions.
(enum column_unit): New enum.
(class exploc_with_display_col): New class.
(class layout_point): Convert m_column member to array m_columns[2].
(layout_range::contains_point): Add col_unit argument.
(test_layout_range_for_single_point): Pass new argument.
(test_layout_range_for_single_line): Likewise.
(test_layout_range_for_multiple_lines): Likewise.
(line_bounds::convert_to_display_cols): New function.
(layout::get_state_at_point): Add col_unit argument.
(make_range): Use empty filename rather than dummy filename.
(get_line_width_without_trailing_whitespace): Rename to...
(get_line_bytes_without_trailing_whitespace): ...this.
(test_get_line_width_without_trailing_whitespace): Rename to...
(test_get_line_bytes_without_trailing_whitespace): ...this.
(class layout): m_exploc changed to exploc_with_display_col from
plain expanded_location.
(layout::get_linenum_width): New accessor member function.
(layout::get_x_offset_display): Likewise.
(layout::calculate_linenum_width): New subroutine for the constuctor.
(layout::calculate_x_offset_display): Likewise.
(layout::layout): Use the new subroutines. Add multibyte awareness.
(layout::print_source_line): Add multibyte awareness.
(layout::print_line): Likewise.
(layout::print_annotation_line): Likewise.
(line_label::line_label): Likewise.
(layout::print_any_labels): Likewise.
(layout::annotation_line_showed_range_p): Likewise.
(get_printed_columns): Likewise.
(class line_label): Rename m_length to m_display_width.
(get_affected_columns): Rename to...
(get_affected_range): ...this; add col_unit argument and multibyte
awareness.
(class correction): Add m_affected_bytes and m_display_cols
members. Rename m_len to m_byte_length for clarity. Add multibyte
awareness throughout.
(correction::insertion_p): Add multibyte awareness.
(correction::compute_display_cols): New function.
(correction::ensure_terminated): Use new member name m_byte_length.
(line_corrections::add_hint): Add multibyte awareness.
(layout::print_trailing_fixits): Likewise.
(layout::get_x_bound_for_row): Likewise.
(test_one_liner_simple_caret_utf8): New self-test analogous to the one
with _utf8 suffix removed, testing multibyte awareness.
(test_one_liner_caret_and_range_utf8): Likewise.
(test_one_liner_multiple_carets_and_ranges_utf8): Likewise.
(test_one_liner_fixit_insert_before_utf8): Likewise.
(test_one_liner_fixit_insert_after_utf8): Likewise.
(test_one_liner_fixit_remove_utf8): Likewise.
(test_one_liner_fixit_replace_utf8): Likewise.
(test_one_liner_fixit_replace_non_equal_range_utf8): Likewise.
(test_one_liner_fixit_replace_equal_secondary_range_utf8): Likewise.
(test_one_liner_fixit_validation_adhoc_locations_utf8): Likewise.
(test_one_liner_many_fixits_1_utf8): Likewise.
(test_one_liner_many_fixits_2_utf8): Likewise.
(test_one_liner_labels_utf8): Likewise.
(test_diagnostic_show_locus_one_liner_utf8): Likewise.
(test_overlapped_fixit_printing_utf8): Likewise.
(test_overlapped_fixit_printing): Adapt for changes to
get_affected_columns, get_printed_columns and class corrections.
(test_overlapped_fixit_printing_2): Likewise.
(test_linenum_sep): New constant.
(test_left_margin): Likewise.
(test_offset_impl): Helper function for new test.
(test_layout_x_offset_display_utf8): New test.
(diagnostic_show_locus_c_tests): Call new tests.
gcc/testsuite/ChangeLog:
2019-12-09 Lewis Hyatt <lhyatt@gmail.com>
PR preprocessor/49973
* gcc.dg/plugin/diagnostic_plugin_test_show_locus.c
(test_show_locus): Tweak so that expected output is the same as
before the diagnostic-show-locus.c changes.
* gcc.dg/cpp/pr66415-1.c: Likewise.
From-SVN: r279137
While trying out Dennis's Armv8.6-A patch, I noticed that texi2pod.pl
didn't handle the new @multitable correctly. There were two problems:
(1) @multitables nested in other @tables inherited the @item type from
the enclosing @table. Since the new @multitable is in a @table @samp,
we applied @samp markup to the @multitable @items. This in turn
meant that it captured the @tab separator in the @item markup.
Fixed by pushing an empty item code onto the stack.
(2) We didn't handle @headitem. Fixed by enclosing it in italics,
like we do for section headings. This causes it to be underlined
in the man output.
2019-12-07 Richard Sandiford <richard.sandiford@arm.com>
contrib/
* texi2pod.pl: Handle @headitems in @multitables, printing them
in italics. Push an empty item code onto the stack.
From-SVN: r279074
* vim-gcc-dev/syntax/gcc-match.vim: Do not override 'tabstop' here.
* vimrc: Set preferred values for 'tabstop', 'softtabstop',
'shiftwidth', 'noexpandtab', 'textwidth', 'formatoptions' for all
files, not just C-like files.
From-SVN: r275316
Due to the python 3 conversion, files should be opened in text mode,
matching stdin/stdout.
2019-05-21 Janne Blomqvist <jb@gcc.gnu.org>
* mklog: Open files in text mode.
From-SVN: r271459
Upstream will drop support for Python 2.x on January 1, 2020. This
patch converts the contrib/mklog script to Python 3. The process for
the conversion was as follows.
- Use the futurize tool (https://python-future.org ) to apply the
print_with_import, except, and dict transformations.
- Remove the "from __future__ import print_function".
- Change the shebang line to search for python3 in the environment.
- Modify the run() function to return a str instead of bytes.
- Update the copyright year.
contrib/ChangeLog:
2019-05-21 Janne Blomqvist <jb@gcc.gnu.org>
* mklog: Convert to Python 3.
From-SVN: r271456
2019-04-19 Christophe Lyon <christophe.lyon@linaro.org>
PR translation/90118
contrib/
* check-internal-format-escaping.py: Check that %< is not next to
a word.
gcc/
* config/aarch64/aarch64.c (aarch64_override_options_internal):
Add missing space before %<.
From-SVN: r270454
* dg-extract-results.sh: Only handle WARNING: program timed out
lines specially in "$MODE" == "sum". Restore previous behavior
for "$MODE" != "sum". Clear has_timeout and timeout_cnt if in
a different variant or curfile is empty.
* dg-extract-results.py: Fix a typo.
From-SVN: r270415
2019-03-05 Christophe Lyon <christophe.lyon@linaro.org>
contrib/
* dg-extract-results.py: Handle case where a WARNING happens with
the first test of a harness.
From-SVN: r269394
2019-03-05 Christophe Lyon <christophe.lyon@linaro.org>
contrib/
* dg-extract-results.sh: Fix order of WARNING and following test
result.
From-SVN: r269393
2018-11-26 Iain Buclaw <ibuclaw@gdcproject.org>
* update-copyright.py (TestsuiteFilter): Skip .d tests.
(LibPhobosFilter): Add filter for upstream D sources.
(GCCCopyright): Add D Language Foundation as external author.
(GCCCmdLine): Add libphobos.
From-SVN: r266491
Currently, dg-cmp-results will not print anything for a test that was
not run before, even if it is a FAIL or UNRESOLVED now. This means that
when contributing a code change together with a testcase in the same
commit one must run dg-cmp-results twice: once to check for regression
on a full testsuite run and once against the new testcase with -v -v.
This also prevents using dg-cmp-results on sum files generated with
test_summary since these would not contain PASS.
This patch changes dg-cmp-results to print NA->FAIL and NA->UNRESOLVED
changes by default.
2018-10-25 Thomas Preud'homme <thomas.preudhomme@linaro.org>
contrib/
* dg-cmp-results.sh: Print NA-FAIL and NA->UNRESOLVED changes at
default verbosity.
From-SVN: r265483
one can now use verbatim the arguments used by the driver invocation to
link e.g. cc1.
2018-10-04 Bernhard Reutner-Fischer <aldot@gcc.gnu.org>
* unused_functions.py: Handle archive files.
From-SVN: r264856
For a set of object-files, determine symbols that are
- public but should be static
2018-10-04 Bernhard Reutner-Fischer <aldot@gcc.gnu.org>
* unused_functions.py: New file.
From-SVN: r264837
2018-09-25 Martin Liska <mliska@suse.cz>
PR middle-end/86078
* doc/invoke.texi: Document all parameters and remove default
of the parameters.
2018-09-25 Martin Liska <mliska@suse.cz>
PR middle-end/86078
* check-params-in-docs.py: New file.
From-SVN: r264558
2018-01-19 Martin Liska <mliska@suse.cz>
* analyze_brprob.py: Support new format that can be easily
parsed. Add new column to report.
2018-01-19 Martin Liska <mliska@suse.cz>
* predict.c (dump_prediction): Add new format for
analyze_brprob.py script which is enabled with -details
suboption.
* profile-count.h (precise_p): New function.
From-SVN: r256886
2017-06-20 Thomas Preud'homme <thomas.preudhomme@arm.com>
contrib/
* dg-cmp-results.sh: Keep test result lines rather than throwing
header and summary to support sum files with multiple tools.
From-SVN: r249422
2017-05-31 David Malcolm <dmalcolm@redhat.com>
Martin Liska <mliska@suse.cz>
* filter_params.py: New, porting the perl script to python,
adding a test suite.
* filter_gcc_for_doxygen_new: New file.
Co-Authored-By: Martin Liska <mliska@suse.cz>
From-SVN: r248739
2017-05-30 Martin Liska <mliska@suse.cz>
* analyze_brprob.py: Add new argument to parse and modify
predict.def file.
* analyze_brprob_spec.py: Likewise.
From-SVN: r248600
2017-05-29 Tom de Vries <tom@codesourcery.com>
* check_GNU_style_lib.py (TrailingWhitespaceCheck.check): Assert no
trailing eol.
(TrailingWhitespaceTest): New unit test.
(check_GNU_style_file): Remove eol before checking.
From-SVN: r248556
2017-05-24 Tom de Vries <tom@codesourcery.com>
* check_GNU_style_lib.py: New file, factored out of ...
* check_GNU_style.py: ... here. Call main unconditionally.
From-SVN: r248403
2017-04-11 Damian Rouson <damian@sourceryinstitute.org>
* download_prerequisites (md5_check): New function emulates Linux
'md5 --check' on macOS. Modified script for macOS compatibility.
From-SVN: r246845
contrib/
* update-copyright.py: Add libhsail-rt to self.default_dirs
and call self.add_dir on it. Add Intel Corporation to external
authors.
gcc/
* brig-builtins.def: Update copyright years.
* config/arm/arm_acle_builtins.def: Update copyright years.
gcc/brig/
Update copyright years.
gcc/testsuite/
* brig.dg/dg.exp: Update copyright years.
* lib/brig-dg.exp: Update copyright years.
* lib/brig.exp: Update copyright years.
libhsail-rt/
Update copyright years.
libstdc++-v3/
* libsupc++/eh_atomics.h: Update copyright years.
* testsuite/20_util/unique_ptr/cons/default.cc: Update copyright years.
From-SVN: r244920
The files arm-cores.def, arm-fpus.def and arm-arches.def are parsed and
used in several places and the format is slightly awkward to maintain
as they must be parsable in C and by certain scripts. Furthermore,
changes to the content that affects every entry is particularly awkward for
dealing with merges.
This patch replaces all three files with a single file that specifies all
the command-line related definitions in a new format that allows for better
checking for consistency as well as (hopefully) easier to merge changes.
The awk script used to parse it is relatively complicated, but should be
pretty portable. It works by parsing in all the data and then operating
one of a number of possible sub-commands to generate the desired output.
The new method picked up one error. The CPU descriptions referred to an
architecture ARMv5tej which was not supported by -march. This has been
fixed by adding the relevant entry to the architecture list.
gcc:
* config.gcc: Use new awk script to check CPU, FPU and architecture
parameters for --with-... options.
* config/arm/parsecpu.awk: New file
* config/arm/arm-cpus.in: New file.
* config/arm/arm-opts.h: Include arm-cpu.h instead of processing .def
files.
* config/arm/arm.c: Include arm-cpu-data.h instead of processing .def
files.
* config/arm/t-arm: Update dependency rules.
* common/config/arm/arm-common.c: Include arm-cpu-cdata.h instead
of processing .def files.
* config/arm/genopt.sh: Deleted.
* config/arm/gentune.sh: Deleted.
* config/arm/arm-cores.def: Deleted.
* config/arm/arm-arches.def: Deleted.
* config/arm/arm-fpus.def: Deleted.
* config/arm/arm-tune.md: Regenerated.
* config/arm/arm-tables.opt: Regenerated.
* config/arm/arm-cpu.h: New generated file.
* config/arm/arm-cpu-data.h: New generated file.
* config/arm/arm-cpu-cdata.h: New generated file.
Contrib:
* gcc_update: Adjust touch list.
From-SVN: r244316
