Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* src/c++98/Makefile.am: Use CXXCOMPILE not LTCXXCOMPILE.
* src/c++98/Makefile.in: Regenerate.
When the values is guaranteed to fit in the SSO buffer we know the
string won't allocate, so the function can be noexcept. For 32-bit
integers, we know they need no more than 9 bytes (or 10 with a minus
sign) and the SSO buffer is 15 bytes.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/bits/basic_string.h [_GLIBCXX_USE_CXX11_ABI]
(to_string): Add noexcept if the type width is 32 bits or less.
Remove UB in atomic_ref/wait_notify test.
Signed-off-by: Thomas Rodgers <trodgers@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/101761
* testsuite/29_atomics/atomic_ref/wait_notify.cc (test): Use
va and vb as arguments to wait/notify, remove unused bb local.
Native mingw builds enable TLS, but crosses don't because we don't use
GCC_CHECK_TLS in the cross-compiler config.
libstdc++-v3/ChangeLog:
* crossconfig.m4: Check for TLS support on mingw.
* configure: Regenerate.
The last missing piece of the C++17 standard library is the hardware
intereference size constants. Much of the delay in implementing these has
been due to uncertainty about what the right values are, and even whether
there is a single constant value that is suitable; the destructive
interference size is intended to be used in structure layout, so program
ABIs will depend on it.
In principle, both of these values should be the same as the target's L1
cache line size. When compiling for a generic target that is intended to
support a range of target CPUs with different cache line sizes, the
constructive size should probably be the minimum size, and the destructive
size the maximum, unless you are constrained by ABI compatibility with
previous code.
From discussion on gcc-patches, I've come to the conclusion that the
solution to the difficulty of choosing stable values is to give up on it,
and instead encourage only uses where ABI stability is unimportant: in
particular, uses where the ABI is shared at most between translation units
built at the same time with the same flags.
To that end, I've added a warning for any use of the constant value of
std::hardware_destructive_interference_size in a header or module export.
Appropriate uses within a project can disable the warning.
A previous iteration of this patch included an -finterference-tune flag to
make the value vary with -mtune; this iteration makes that the default
behavior, which should be appropriate for all reasonable uses of the
variable. The previous default of "stable-ish" seems to me likely to have
been more of an attractive nuisance; since we can't promise actual
stability, we should instead make proper uses more convenient.
JF Bastien's implementation proposal is summarized at
https://github.com/itanium-cxx-abi/cxx-abi/issues/74
I implement this by adding new --params for the two sizes. Targets can
override these values in targetm.target_option.override() to support a range
of values for the generic target; otherwise, both will default to the L1
cache line size.
64 bytes still seems correct for all x86.
I'm not sure why he proposed 64/64 for generic 32-bit ARM, since the Cortex
A9 has a 32-byte cache line, so I'd think 32/64 would make more sense.
He proposed 64/128 for generic AArch64, but since the A64FX now has a 256B
cache line, I've changed that to 64/256.
Other arch maintainers are invited to set ranges for their generic targets
if that seems better than using the default cache line size for both values.
With the above choice to reject stability as a goal, getting these values
"right" is now just a matter of what we want the default optimization to be,
and we can feel free to adjust them as CPUs with different cache lines
become more and less common.
gcc/ChangeLog:
* params.opt: Add destructive-interference-size and
constructive-interference-size.
* doc/invoke.texi: Document them.
* config/aarch64/aarch64.c (aarch64_override_options_internal):
Set them.
* config/arm/arm.c (arm_option_override): Set them.
* config/i386/i386-options.c (ix86_option_override_internal):
Set them.
gcc/c-family/ChangeLog:
* c.opt: Add -Winterference-size.
* c-cppbuiltin.c (cpp_atomic_builtins): Add __GCC_DESTRUCTIVE_SIZE
and __GCC_CONSTRUCTIVE_SIZE.
gcc/cp/ChangeLog:
* constexpr.c (maybe_warn_about_constant_value):
Complain about std::hardware_destructive_interference_size.
(cxx_eval_constant_expression): Call it.
* decl.c (cxx_init_decl_processing): Check
--param *-interference-size values.
libstdc++-v3/ChangeLog:
* include/std/version: Define __cpp_lib_hardware_interference_size.
* libsupc++/new: Define hardware interference size variables.
gcc/testsuite/ChangeLog:
* g++.dg/warn/Winterference.H: New file.
* g++.dg/warn/Winterference.C: New test.
* g++.target/aarch64/interference.C: New test.
* g++.target/arm/interference.C: New test.
* g++.target/i386/interference.C: New test.
This avoids test.invalid.some.domain being successfully resolved.
libstdc++-v3/ChangeLog:
* testsuite/experimental/net/internet/resolver/ops/lookup.cc:
Fix invalid hostname to only match the .invalid TLD.
For some reason r170217 didn't add compare_exchange_weak to the
__atomic_base<T*> partial specialization, and so weak compare exchange
operations on pointers use compare_exchange_strong instead.
This adds __atomic_base<T*>::compare_exchange_weak and then uses it in
std::atomic<T*>::compare_exchange_weak.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/bits/atomic_base.h (__atomic_base<P*>::compare_exchange_weak):
Add new functions.
* include/std/atomic (atomic<T*>::compare_exchange_weak): Use
it.
P0418R2 removed some preconditions from std::atomic::compare_exchange_*
but we still enforce them via __glibcxx_assert. This removes those
assertions.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR c++/102177
* include/bits/atomic_base.h (__is_valid_cmpexch_failure_order):
New function to check if a memory order is valid for the failure
case of compare exchange operations.
(__atomic_base<I>::compare_exchange_weak): Simplify assertions
by using __is_valid_cmpexch_failure_order.
(__atomic_base<I>::compare_exchange_strong): Likewise.
(__atomic_base<P*>::compare_exchange_weak): Likewise.
(__atomic_base<P*>::compare_exchange_strong): Likewise.
(__atomic_impl::compare_exchange_weak): Add assertion.
(__atomic_impl::compare_exchange_strong): Likewise.
* include/std/atomic (atomic::compare_exchange_weak): Likewise.
(atomic::compare_exchange_strong): Likewise.
We already supported this feature as std::__invoke<R>, for internal use.
This just adds a public version of it to <functional>.
Internal uses should continue to include <bits/invoke.h> and use
std::__invoke<R> so that they don't need to include all of <functional>.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/std/functional (invoke_r): Define.
* include/std/version (__cpp_lib_invoke_r): Define.
* testsuite/20_util/function_objects/invoke/version.cc: Check
for __cpp_lib_invoke_r as well as __cpp_lib_invoke.
* testsuite/20_util/function_objects/invoke/4.cc: New test.
These destructors are noexcept anyway. I removed the redundant noexcept
from the error_category destructor's declaration in r0-123475, but
didn't remove it from the defaulted definition in system_error.cc. That
causes warnings if the library is built with Clang.
This removes the redundant noexcept from ~error_category and
~system_error and adds tests to ensure they really are noexcept.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* src/c++11/system_error.cc (error_category::~error_category()):
Remove noexcept-specifier.
(system_error::~system_error()): Likewise.
* testsuite/19_diagnostics/error_category/noexcept.cc: New test.
* testsuite/19_diagnostics/system_error/noexcept.cc: New test.
This adds a missing return statement to the non-futex wait-until
operation.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/102074
* include/bits/atomic_timed_wait.h (__timed_waiter_pool)
[!_GLIBCXX_HAVE_PLATFORM_TIMED_WAIT]: Add missing return.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/experimental/internet (__make_resolver_error_code):
Handle EAI_SYSTEM errors.
(basic_resolver_results): Use __make_resolver_error_code. Use
Glibc NI_MAXHOST and NI_MAXSERV values for buffer sizes.
Solaris 11 does not have "http" in /etc/services, which causes this test
to fail. Try some other services until we find one that works.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* testsuite/experimental/net/internet/resolver/ops/lookup.cc:
Try other service if "http" fails.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* testsuite/17_intro/names.cc: Undefine some more names used
by Solaris system headers.
I noticed that after the static_assert failures in lwg3466.cc, we got
various follow-on errors because we went ahead and tried to instantiate the
promise<T> member functions even after instantiating the class itself ran
into problems. Interrupting instantiation of the class itself seems likely
to cause error-recovery problems, but preventing instantiation of member
functions seems strictly better for error-recovery.
This doesn't fix any of the specific testcases in PR96286, but addresses
part of that problem space.
PR c++/96286
gcc/cp/ChangeLog:
* cp-tree.h (struct lang_type): Add erroneous bit-field.
(CLASSTYPE_ERRONEOUS): New.
* pt.c (limit_bad_template_recursion): Check it.
(instantiate_class_template_1): Set it.
libstdc++-v3/ChangeLog:
* testsuite/30_threads/promise/requirements/lwg3466.cc:
Remove dg-prune-outputs.
gcc/testsuite/ChangeLog:
* g++.dg/template/access2.C: Split struct A.
Removing the allocator<void> specialization for the versioned namespace
breaks _Extptr_allocator<void> because the allocator<void>
specialization was still declared in <bits/memoryfwd.h>, making it an
incomplete type. It wrong to remove that specialization anyway, because
it is still needed pre-C++20.
This removes the #if ! _GLIBCXX_INLINE_VERSION check, so that
allocator<void> is still explicitly specialized for the versioned
namespace, consistent with the normal unversioned namespace mode.
To make _Extptr_allocator<void> usable as a ProtoAllocator, this change
adds a default constructor and converting constructor. That is
consistent with std::allocator<void> since C++20 (and harmless to do for
earlier standards).
I'm also explicitly specializing allocator_traits<allocator<void>> so
that it doesn't need to use allocator<void>::construct and destroy.
Doing that allows those members to be removed, further simplifying
allocator<void>. That new explicit specialization can delete the
allocate, deallocate and max_size members, which are always ill-formed
for allocator<void>.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/bits/alloc_traits.h (allocator_traits): Add explicit
specialization for allocator<void>. Improve doxygen comments.
* include/bits/allocator.h (allocator<void>): Restore for the
versioned namespace.
(allocator<void>::construct, allocator<void>::destroy): Remove.
* include/ext/extptr_allocator.h (_Extptr_allocator<void>):
Add default constructor and converting constructor.
When the path is already absolute, the call to current_path() is
wasteful, because operator/ will ignore the left operand anyway.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/99876
* src/c++17/fs_ops.cc (fs::absolute): Call non-throwing form,
to avoid unnecessary current_path() call.
This avoids "<template-parameter-2-2>" being shown in the diagnostics
for ill-formed uses of std::function constructor:
In instantiation of 'std::function<_Res(_ArgTypes ...)>::function(_Functor&&)
[with _Functor = f(f()::_Z1fv.frame*)::<lambda()>;
<template-parameter-2-2> = void; _Res = void; _ArgTypes = {}]'
Instead we get:
In instantiation of 'std::function<_Res(_ArgTypes ...)>::function(_Functor&&)
[with _Functor = f(f()::_Z1fv.frame*)::<lambda()>;
_Constraints = void; _Res = void; _ArgTypes = {}]'
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/bits/std_function.h (function::function(F&&)): Give
name to defaulted template parameter, to improve diagnostics.
Use markdown for more doxygen comments.
This makes the std::function constructor use perfect forwarding, to
avoid an unnecessary move-construction of the target. This means we need
to rewrite the _Function_base::_Base_manager::_M_init_functor function
to use a forwarding reference, and so can reuse it for the clone
operation.
Also simplify the SFINAE constraints on the constructor, by combining
the !is_same_v<remove_cvref_t<F>, function> constraint into the
_Callable trait.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/bits/std_function.h (_function_base::_Base_manager):
Replace _M_init_functor with a function template using a
forwarding reference, and a pair of _M_create function
templates. Reuse _M_create for the clone operation.
(function::_Decay_t): New alias template.
(function::_Callable): Simplify by using _Decay.
(function::function(F)): Change parameter to forwarding
reference, as per LWG 2447. Add noexcept-specifier. Simplify
constraints.
(function::operator=(F&&)): Add noexcept-specifier.
* testsuite/20_util/function/cons/lwg2774.cc: New test.
* testsuite/20_util/function/cons/noexcept.cc: New test.
Add static assertions to std::function, so that more user-friendly
diagnostics are given when trying to store a non-copyable target object.
These preconditions were added as "Mandates:" by LWG 2447, but I'm
committing them separately from implementing that, to allow just this
change to be backported more easily.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/bits/std_function.h (function::function(F)): Add
static assertions to check constructibility requirements.
Add more preprocessor conditions to check for constants being defined
before using them, so that the Networking TS headers can be compiled on
a wider range of platforms.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/100285
* configure.ac: Check for O_NONBLOCK.
* configure: Regenerate.
* include/experimental/internet: Include <ws2tcpip.h> for
Windows. Use preprocessor conditions around more constants.
* include/experimental/socket: Use preprocessor conditions
around more constants.
* testsuite/experimental/net/internet/resolver/base.cc: Only use
constants when the corresponding C macro is defined.
* testsuite/experimental/net/socket/basic_socket.cc: Likewise.
* testsuite/experimental/net/socket/socket_base.cc: Likewise.
Make preprocessor checks more fine-grained.
The Windows CRT headers define structs with members called f, x, y etc
so don't check those. There are also lots of unnecessary function
parameters in mingw headers using non-reserved names, e.g.
<time.h> uses p and z as parameters of mingw_gettimeofday
<inttypes.h> uses j as a parameter of imaxabs
<pthread.h> uses l, o and func as parameter names
Those should be fixed in the headers instead.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* testsuite/17_intro/names.cc: Adjust for Windows.
While laying some groundwork for constexpr std::vector, I noticed some
bugs in the std::uninitialized_xxx algorithms. The conditions being
checked for optimizing trivial cases were not quite right, as shown in
the examples in the PR.
This consolidates the checks into a single macro. The macro has
appropriate definitions for C++98 or for later standards, to avoid a #if
everywhere the checks are used. For C++11 and later the check makes a
call to a new function doing a static_assert to ensure we don't use
assignment in cases where construction would have been invalid.
Extracting that check to a separate function will be useful for
constexpr std::vector, as that can't use std::uninitialized_copy
directly because it isn't constexpr).
The consolidated checks mean that some slight variations in static
assert message are gone, as there is only one place that does the assert
now. That required adjusting some tests. As part of that the redundant
89164_c++17.cc test was merged into 89164.cc which is compiled as C++17
by default now, but can also use other -std options if the
C++17-specific error is made conditional with a target selector.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
PR libstdc++/102064
* include/bits/stl_uninitialized.h (_GLIBCXX_USE_ASSIGN_FOR_INIT):
Define macro to check conditions for optimizing trivial cases.
(__check_constructible): New function to do static assert.
(uninitialized_copy, uninitialized_fill, uninitialized_fill_n):
Use new macro.
* testsuite/20_util/specialized_algorithms/uninitialized_copy/1.cc:
Adjust dg-error pattern.
* testsuite/23_containers/vector/cons/89164.cc: Likewise. Add
C++17-specific checks from 89164_c++17.cc.
* testsuite/23_containers/vector/cons/89164_c++17.cc: Removed.
* testsuite/20_util/specialized_algorithms/uninitialized_copy/102064.cc:
New test.
* testsuite/20_util/specialized_algorithms/uninitialized_copy_n/102064.cc:
New test.
* testsuite/20_util/specialized_algorithms/uninitialized_fill/102064.cc:
New test.
* testsuite/20_util/specialized_algorithms/uninitialized_fill_n/102064.cc:
New test.
This function claims to remove a single character at index p, but it
actually removes p+1 characters beginning at p. So r.erase(0) removes
the first character, but r.erase(1) removes the second and third, and
r.erase(2) removes the second, third and fourth. This is not a useful
API.
The overload is present in the SGI STL <stl_rope.h> header that we
imported, but it isn't documented in the API reference. The erase
overloads that are documented are:
erase(const iterator& p)
erase(const iterator& f, const iterator& l)
erase(size_type i, size_type n);
Having an erase(size_type p) overload that erases a single character (as
the comment says it does) might be useful, but would be inconsistent
with std::basic_string::erase(size_type p = 0, size_type n = npos),
which erases from p to the end of the string when called with a single
argument.
Since the function isn't part of the documented API, doesn't do what it
claims to do (or anything useful) and "fixing" it would leave it
inconsistent with basic_string, I'm just removing that overload.
libstdc++-v3/ChangeLog:
PR libstdc++/102048
* include/ext/rope (rope::erase(size_type)): Remove broken
function.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* include/std/type_traits (is_layout_compatible): Define.
(is_corresponding_member): Define.
* include/std/version (__cpp_lib_is_layout_compatible): Define.
* testsuite/20_util/is_layout_compatible/is_corresponding_member.cc:
New test.
* testsuite/20_util/is_layout_compatible/value.cc: New test.
* testsuite/20_util/is_layout_compatible/version.cc: New test.
* testsuite/20_util/is_pointer_interconvertible/with_class.cc:
New test.
* testsuite/23_containers/span/layout_compat.cc: Do not use real
std::is_layout_compatible trait if available.
Clang warns about this, but GCC doesn't (see PR c++/102036).
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:
* src/c++11/cxx11-shim_facets.cc: Fix mismatched class-key in
explicit instantiation definitions.
The standard shows this default template argument in the <ranges>
synopsis, but it was missing in libstdc++.
libstdc++-v3/ChangeLog:
* include/std/ranges (basic_istream_view): Add default template
argument.
* testsuite/std/ranges/istream_view.cc: Check it.
The null pointer check is never needed for correct code, only to
gracefully handle undefined cases. Add __builtin_expect to be sure that
we don't pessimize the valid uses.
libstdc++-v3/ChangeLog:
* libsupc++/dyncast.cc (__dynamic_cast): Add __builtin_expect to
precondition check.
