Sync with binutils for PR binutils/27397. Check if host supports
multi-byte NOPs before enabling CET on host.
config/
PR bootstrap/99703
* cet.m4 (GCC_CET_HOST_FLAGS): Check if host supports multi-byte
NOPs.
libiberty/
PR bootstrap/99703
* configure: Regenerated.
With --enable-cet, require CET support only for the final GCC build.
Don't enable CET without CET support for non-bootstrap build, in stage1
nor for build support.
config/
PR bootstrap/96202
* cet.m4 (GCC_CET_HOST_FLAGS): Don't enable CET without CET
support in stage1 nor for build support.
gcc/
PR bootstrap/96202
* configure: Regenerated.
libbacktrace/
PR bootstrap/96202
* configure: Regenerated.
libcc1/
PR bootstrap/96202
* configure: Regenerated.
libcpp/
PR bootstrap/96202
* configure: Regenerated.
libdecnumber/
PR bootstrap/96202
* configure: Regenerated.
libiberty/
PR bootstrap/96202
* configure: Regenerated.
lto-plugin/
PR bootstrap/96202
* configure: Regenerated.
Don't perform CET run-time check for host when cross compiling. Instead,
enable CET in cross compiler if possible so that it will run on both CET
and non-CET hosts.
config/
PR bootstrap/94998
* cet.m4 (GCC_CET_HOST_FLAGS): Enable CET in cross compiler if
possible.
libiberty/
PR bootstrap/94998
* configure: Regenerated.
lto-plugin/
PR bootstrap/94998
* configure: Regenerated.
GCC_CET_HOST_FLAGS uses -Wl,-z,ibt,-z,shstk to check if Linux/x86 host
has Intel CET enabled by introducing an Intel CET violation on purpose.
To avoid false positive, check whether -Wl,-z,ibt,-z,shstk works first.
-fcf-protection=none is added to avoid false negative when -fcf-protection
is enabled by default.
config/
PR bootstrap/94739
* cet.m4 (GCC_CET_HOST_FLAGS): Add -fcf-protection=none to
-Wl,-z,ibt,-z,shstk. Check whether -fcf-protection=none
-Wl,-z,ibt,-z,shstk works first.
libiberty/
PR bootstrap/94739
* configure: Regenerated.
lto-plugin/
PR bootstrap/94739
* configure: Regenerated.
Since ld is Intel CET enabled on Intel CET enabled host, dlopen fails on
liblto_plugin.so if it isn't Intel CET enabled. Add GCC_CET_HOST_FLAGS
to cet.m4, use it in libiberty and lto-plugin to always enable Intel
CET in liblto_plugin.so on Intel CET enabled host.
On Linux/x86 host, enable Intel CET by default if assembler and compiler
support Intel CET so that the generated liblto_plugin.so can be used on
both CET and non-CET machines. It is an error to disable Intel CET in
liblto_plugin.so on Intel CET enabled host.
config/
PR bootstrap/94739
* cet.m4 (GCC_CET_HOST_FLAGS): New.
libiberty/
PR bootstrap/94739
* Makefile.in (COMPILE.c): Add @CET_HOST_FLAGS@.
(configure_deps): Add $(srcdir)/../config/cet.m4 and
$(srcdir)/../config/enable.m4.
* aclocal.m4: Include ../config/cet.m4 and ../config/enable.m4.
* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
AC_SUBST(CET_HOST_FLAGS).
* configure: Regenerated.
lto-plugin/
PR bootstrap/94739
* Makefile.am (AM_CFLAGS): Add $(CET_HOST_FLAGS).
* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
AC_SUBST(CET_HOST_FLAGS).
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Enable building libgcc with CET options by default on Linux/x86 if
binutils supports CET v2.0. It can be disabled with --disable-cet.
It is an error to configure GCC with --enable-cet if bintuiils
doesn't support CET v2.0.
ENDBR instruction is added to __morestack_large_model since it is
called indirectly.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
config/
* cet.m4: New file.
gcc/
* config.gcc (extra_headers): Add cet.h for x86 targets.
* config/i386/cet.h: New file.
* doc/install.texi: Add --enable-cet/--disable-cet.
libgcc/
* Makefile.in (configure_deps): Add $(srcdir)/../config/cet.m4.
(CET_FLAGS): New.
* config/i386/morestack.S: Include <cet.h>.
(__morestack_large_model): Add _CET_ENDBR at function entrance.
* config/i386/resms64.h: Include <cet.h>.
* config/i386/resms64f.h: Likewise.
* config/i386/resms64fx.h: Likewise.
* config/i386/resms64x.h: Likewise.
* config/i386/savms64.h: Likewise.
* config/i386/savms64f.h: Likewise.
* config/i386/t-linux (HOST_LIBGCC2_CFLAGS): Add $(CET_FLAGS).
(CRTSTUFF_T_CFLAGS): Likewise.
* configure.ac: Include ../config/cet.m4.
Set and substitute CET_FLAGS.
* configure: Regenerated.
From-SVN: r254868
