Similar to commit fb5d27be27
"libgomp: Consider '--with-build-sysroot=[...]' for target libraries' build-tree testing (instead of build-time 'CC' etc.) [PR91884, PR109951]",
this is commit a0b48358cb
"libffi/test: Fix compilation for build sysroot" done differently,
avoiding build-tree testing use of any random gunk that may appear in
build-time 'CC', 'CXX'.
PR testsuite/109951
libffi/
* configure.ac: 'AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)'.
<local.exp>: Don't set 'CC_FOR_TARGET', 'CXX_FOR_TARGET', instead
set 'SYSROOT_CFLAGS_FOR_TARGET'.
* Makefile.in: Regenerate.
* configure: Likewise.
* include/Makefile.in: Likewise.
* man/Makefile.in: Likewise.
* testsuite/Makefile.in: Likewise.
* testsuite/lib/libffi.exp (libffi_target_compile): If
'--with-build-sysroot=[...]' was specified, use it for build-tree
testing.
Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
ChangeLog:
* configure: Regenerate.
* configure.ac: Do not add default runpaths to GCC exes
when we are building -static-libstdc++/-static-libgcc (the
default).
* libtool.m4: Add 'enable-darwin-at-runpath'. Act on the
enable flag to alter Darwin libraries to use @rpath names.
gcc/ChangeLog:
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* config/darwin.h: Handle Darwin rpaths.
* config/darwin.opt: Handle Darwin rpaths.
* Makefile.in: Handle Darwin rpaths.
gcc/ada/ChangeLog:
* gcc-interface/Makefile.in: Handle Darwin rpaths.
gcc/jit/ChangeLog:
* Make-lang.in: Handle Darwin rpaths.
libatomic/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libbacktrace/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
libgcc/ChangeLog:
* config/t-slibgcc-darwin: Generate libgcc_s
with an @rpath name.
* config.host: Handle Darwin rpaths.
libgfortran/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libgm2/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libm2cor/Makefile.am: Handle Darwin rpaths.
* libm2cor/Makefile.in: Regenerate.
* libm2iso/Makefile.am: Handle Darwin rpaths.
* libm2iso/Makefile.in: Regenerate.
* libm2log/Makefile.am: Handle Darwin rpaths.
* libm2log/Makefile.in: Regenerate.
* libm2min/Makefile.am: Handle Darwin rpaths.
* libm2min/Makefile.in: Regenerate.
* libm2pim/Makefile.am: Handle Darwin rpaths.
* libm2pim/Makefile.in: Regenerate.
libgomp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libitm/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libobjc/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libdruntime/Makefile.am: Handle Darwin rpaths.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libquadmath/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libsanitizer/ChangeLog:
* asan/Makefile.am: Handle Darwin rpaths.
* asan/Makefile.in: Regenerate.
* configure: Regenerate.
* hwasan/Makefile.am: Handle Darwin rpaths.
* hwasan/Makefile.in: Regenerate.
* lsan/Makefile.am: Handle Darwin rpaths.
* lsan/Makefile.in: Regenerate.
* tsan/Makefile.am: Handle Darwin rpaths.
* tsan/Makefile.in: Regenerate.
* ubsan/Makefile.am: Handle Darwin rpaths.
* ubsan/Makefile.in: Regenerate.
libssp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
lto-plugin/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
zlib/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
This is a backport of <https://github.com/libffi/libffi/commit/f259a6f6de>,
and contains modifications to commit 5a4774cd4d, as well as the LoongArch
schema portion of commit ee22ecbd11. This is needed for libgo.
libffi/ChangeLog:
PR libffi/108682
* configure.host: Add LoongArch support.
* Makefile.am: Likewise.
* Makefile.in: Regenerate.
* src/loongarch64/ffi.c: New file.
* src/loongarch64/ffitarget.h: New file.
* src/loongarch64/sysv.S: New file.
Fix a problem with the libffi testsuite using a method to determine the
compiler to use resulting in the tool being different from one the
library has been built with, and causing a catastrophic failure from the
inability to actually choose any compiler at all in a cross-compilation
configuration.
Address this problem by providing a DejaGNU configuration file defining
the compiler to use, via the CC_FOR_TARGET TCL variable, set from $CC by
autoconf, which will have all the required options set for the target
compiler to build executables in the environment configured, removing
failures like:
FAIL: libffi.call/closure_fn0.c -W -Wall -Wno-psabi -O0 (test for excess errors)
Excess errors:
default_target_compile: No compiler to compile with
UNRESOLVED: libffi.call/closure_fn0.c -W -Wall -Wno-psabi -O0 compilation failed to produce executable
and bringing overall test results for the `riscv64-linux-gnu' target
(here with the `x86_64-linux-gnu' host and RISC-V QEMU in the Linux user
emulation mode as the target board) from:
=== libffi Summary ===
# of unexpected failures 708
# of unresolved testcases 708
# of unsupported tests 30
to:
=== libffi Summary ===
# of expected passes 1934
# of unsupported tests 28
This is a combined backport of the relevant parts of upstream libffi
changes as follows:
- commit 8308984e479e ("[PATCH] Make sure we're running dejagnu tests
with the right compiler."),
- commit 2d9b3939751b ("[PATCH] Fix for closures with sunpro compiler"),
- commit 0c3824702d3d ("[PATCH] Always set CC_FOR_TARGET for dejagnu, to
make the testsuite respect $CC"),
- commit 7d698125b1f0 ("[PATCH] Use the proper C++ compiler to run C++
tests"),
- commit 6b6df1a7bb37 ("[PATCH] Adds `local.exp` to CLEANFILES"),
- commit 6cf0dea78a5a ("[PATCH] Change CLEANFILES to DISTCLEANFILES")
libffi/
* Makefile.am (DISTCLEANFILES): New variable.
* configure.ac: Produce `local.exp'.
* Makefile.in: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.am (EXTRA_DEJAGNU_SITE_CONFIG): New
variable.
* testsuite/Makefile.in: Regenerate.
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
PR other/79046
libatomic/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libffi/
* configure.ac: Add GCC_BASE_VER.
* include/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* configure: Regenerated.
* testsuite/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* man/Makefile.in: Regenerated.
libgomp/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libitm/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
libmpx/
* mpxrt/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* mpxwrap/Makefile.am (gcc_version): Likewise.
* mpxrt/Makefile.in: Regenerated.
* mpxwrap/Makefile.in: Regenerated.
liboffloadmic/
* plugin/configure.ac: Add GCC_BASE_VER.
* plugin/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* plugin/configure: Regenerated.
* plugin/aclocal.m4: Regenerated.
* plugin/Makefile.in: Regenerated.
libsanitizer/
* interception/Makefile.am (gcc_version): Use @get_gcc_base_ver@
instead of cat to get version from BASE-VER file.
* asan/Makefile.am (gcc_version): Likewise.
* ubsan/Makefile.am (gcc_version): Likewise.
* sanitizer_common/Makefile.am (gcc_version): Likewise.
* lsan/Makefile.am (gcc_version): Likewise.
* tsan/Makefile.am (gcc_version): Likewise.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libvtv/
* testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead
of cat to get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
From-SVN: r244742
* tree.h (OMP_CLAUSE_LINEAR_GIMPLE_SEQ): Define.
* gimplify.c (omp_is_private): Change last argument's type to int.
Only diagnose lastprivate if the simd argument is 1, only diagnose
linear if the simd argument is 2.
(gimplify_omp_for): Adjust omp_is_private callers. When adding
lastprivate or private, add the clause to OMP_FOR_CLAUSES. Pass
GOVD_EXPLICIT to omp_add_variable. For simd with collapse == 1
create OMP_CLAUSE_LINEAR rather than OMP_CLAUSE_PRIVATE for var.
If var != decl and decl is in OMP_CLAUSE_LINEAR, gimplify decl
increment to OMP_CLAUSE_LINEAR_GIMPLE_SEQ.
* omp-low.c (scan_sharing_clauses, lower_lastprivate_clauses): Handle
OMP_CLAUSE_LINEAR_GIMPLE_SEQ.
* tree-nested.c (convert_nonlocal_omp_clauses,
convert_local_omp_clauses): Handle OMP_CLAUSE_LINEAR.
* testsuite/libgomp.c/simd-7.c: New test.
* testsuite/libgomp.c/simd-8.c: New test.
* testsuite/libgomp.c/simd-9.c: New test.
* testsuite/libgomp.c/loop-16.c: New test.
From-SVN: r209760
PR libffi/28313
* configure.ac: Don't treat mips64 as a special case.
* Makefile.am (nodist_libffi_la_SOURCES): Add n32.S.
* configure: Regenerate
* Makefile.in: Ditto.
* fficonfig.h.in: Ditto.
* src/mips/ffitarget.h (REG_L, REG_S, SUBU, ADDU, SRL, LI): Indent.
(LA, EH_FRAME_ALIGN, FDE_ADDR_BYTES): New preprocessor macros.
(FFI_DEFAULT_ABI): Set for n64 case.
(FFI_CLOSURES, FFI_TRAMPOLINE_SIZE): Define for n32 and n64 cases.
* src/mips/n32.S (ffi_call_N32): Add debug macros and labels for FDE.
(ffi_closure_N32): New function.
(.eh_frame): New section
* src/mips/o32.S: Clean up comments.
(ffi_closure_O32): Pass ffi_closure parameter in $12.
* src/mips/ffi.c: Use FFI_MIPS_N32 instead of
_MIPS_SIM == _ABIN32 throughout.
(FFI_MIPS_STOP_HERE): New, use in place of
ffi_stop_here.
(ffi_prep_args): Use unsigned long to hold pointer values. Rewrite
to support n32/n64 ABIs.
(calc_n32_struct_flags): Rewrite.
(calc_n32_return_struct_flags): Remove unused variable. Reverse
position of flag bits.
(ffi_prep_cif_machdep): Rewrite n32 portion.
(ffi_call): Enable for n64. Add special handling for small structure
return values.
(ffi_prep_closure_loc): Add n32 and n64 support.
(ffi_closure_mips_inner_O32): Add cast to silence warning.
(copy_struct_N32, ffi_closure_mips_inner_N32): New functions.
From-SVN: r127336
* ltmain.sh: Update from ToT Libtool.
* libtool.m4: Update from ToT Libtool.
* ltsugar.m4: New. Update from ToT Libtool.
* ltversion.m4: New. Update from ToT Libtool.
* ltoptions.m4: New. Update from ToT Libtool.
* ltconfig: Remove.
* ltcf-c.sh: Remove.
* ltcf-cxx.sh: Remove.
* ltcf-gcj.sh: Remove.
* Regenerate all subdirs
From-SVN: r125032
2007-01-17 Jack Howarth <howarth@bromo.med.uc.edu>
boehm-gc/
* aclocal.m4: Regenerate to use multi.m4.
* configure: Regenerate.
* Makefile.in: Regenerate.
zlib/
* Makefile.am: Add ACLOCAL_AMFLAGS to use multi.m4.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
libffi/
* Makefile.am: Add ACLOCAL_AMFLAGS to use multi.m4.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
libjava/
* configure.ac: Use multi.m4 from aclocal rather than custom
code. Use multi_basedir instead libgcj_basedir. Test for
/proc/self/exe when not cross-compiling.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
libjava/classpath/
* configure.ac: Use multi.m4 from aclocal rather than
custom code. Use multi_basedir instead libgcj_basedir.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
libjava/libltdl/
* Makefile.am: Add ACLOCAL_AMFLAGS to use multi.m4.
* configure.ac: Use multi.m4 from aclocal rather than
custom code.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r120870
2006-12-14 Andreas Tobler <a.tobler@schweiz.org>
* configure.ac: Add TARGET for x86_64-*-darwin*.
* Makefile.am (nodist_libffi_la_SOURCES): Add rules for 64-bit sources
for X86_DARWIN.
* src/x86/ffitarget.h: Set trampoline size for x86_64-*-darwin*.
* src/x86/darwin64.S: New file for x86_64-*-darwin* support.
* configure: Regenerate.
* Makefile.in: Regenerate.
* include/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
* testsuite/libffi.special/unwindtest_ffi_call.cc: New test case for
ffi_call only.
From-SVN: r119856
2006-04-05 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Andreas Tobler <a.tobler@schweiz.ch>
* Makefile.am: Add PA_HPUX port.
* Makefile.in: Regenerate.
* include/Makefile.in: Likewise.
* testsuite/Makefile.in: Likewise.
* configure.ac: Add PA_HPUX rules.
* configure: Regenerate.
* src/pa/ffitarget.h: Rename linux target to PA_LINUX.
Add PA_HPUX and PA64_HPUX.
Rename FFI_LINUX ABI to FFI_PA32 ABI.
(FFI_TRAMPOLINE_SIZE): Define for 32-bit HP-UX targets.
(FFI_TYPE_SMALL_STRUCT2): Define.
(FFI_TYPE_SMALL_STRUCT4): Likewise.
(FFI_TYPE_SMALL_STRUCT8): Likewise.
(FFI_TYPE_SMALL_STRUCT3): Redefine.
(FFI_TYPE_SMALL_STRUCT5): Likewise.
(FFI_TYPE_SMALL_STRUCT6): Likewise.
(FFI_TYPE_SMALL_STRUCT7): Likewise.
* src/pa/ffi.c (ROUND_DOWN): Delete.
(fldw, fstw, fldd, fstd): Use '__asm__'.
(ffi_struct_type): Add support for FFI_TYPE_SMALL_STRUCT2,
FFI_TYPE_SMALL_STRUCT4 and FFI_TYPE_SMALL_STRUCT8.
(ffi_prep_args_LINUX): Rename to ffi_prep_args_pa32. Update comment.
Simplify incrementing of stack slot variable. Change type of local
'n' to unsigned int.
(ffi_size_stack_LINUX): Rename to ffi_size_stack_pa32. Handle long
double on PA_HPUX.
(ffi_prep_cif_machdep): Likewise.
(ffi_call): Likewise.
(ffi_closure_inner_LINUX): Rename to ffi_closure_inner_pa32. Change
return type to ffi_status. Simplify incrementing of stack slot
variable. Only copy floating point argument registers when PA_LINUX
is true. Reformat debug statement.
Add support for FFI_TYPE_SMALL_STRUCT2, FFI_TYPE_SMALL_STRUCT4 and
FFI_TYPE_SMALL_STRUCT8.
(ffi_closure_LINUX): Rename to ffi_closure_pa32. Add 'extern' to
declaration.
(ffi_prep_closure): Make linux trampoline conditional on PA_LINUX.
Add nops to cache flush. Add trampoline for PA_HPUX.
* src/pa/hpux32.S: New file.
* src/pa/linux.S (ffi_call_LINUX): Rename to ffi_call_pa32. Rename
ffi_prep_args_LINUX to ffi_prep_args_pa32.
Localize labels. Add support for 2, 4 and 8-byte small structs. Handle
unaligned destinations in 3, 5, 6 and 7-byte small structs. Order
argument type checks so that common argument types appear first.
(ffi_closure_LINUX): Rename to ffi_closure_pa32. Rename
ffi_closure_inner_LINUX to ffi_closure_inner_pa32.
Co-Authored-By: Andreas Tobler <a.tobler@schweiz.ch>
From-SVN: r112719
