* validate_failures.py: Loosen check for build directory.
State what failed if we couldn't find the source tree or
the target triplet.
From-SVN: r198064
When using validate_failures.py with --manifest and --results, we
don't need a GCC build directory. This is useful when using the
validator outside of the build tree. We were insisting on finding
a valid build tree regardless of those options.
Tested on x86_64. Committed to trunk.
* testsuite-management/validate_failures.py: Update
Copyright years.
Request contributions not to use Python features newer
than 2.4.
(GetBuildData): If this is not a build directory,
emit an error only if --results or --manifest are missing.
From-SVN: r195817
2012-12-01 Bernhard Reutner-Fischer <aldot@gcc.gnu.org>
* testsuite-management/validate_failures.py
(IsInterestingResult): Only strip line a second time if we did split.
Rephrase return statement while at it.
(CollectSumFiles): Also ignore .git directory.
From-SVN: r194182
An earlier patch had made the command line options a global variable
_OPTIONS, but it had not renamed all the uses of the old options argument.
* testsuite-management/validate_failures.py: Fix stale
use of 'options'.
From-SVN: r194092
This is useful when you have two builds of the same compiler. One with
your changes. The other one, a clean build at the same revision.
Instead of using a manifest file, --clean_build will compare the
results it gather from the patched build against those it gathers from
the clean build.
Usage
$ cd /top/of/patched/gcc/bld
$ validate_failures.py --clean_build=clean/bld-gcc
Source directory: /usr/local/google/home/dnovillo/gcc/trunk
Build target: x86_64-unknown-linux-gnu
Getting actual results from build directory .
./x86_64-unknown-linux-gnu/libstdc++-v3/testsuite/libstdc++.sum
./x86_64-unknown-linux-gnu/libffi/testsuite/libffi.sum
./x86_64-unknown-linux-gnu/libgomp/testsuite/libgomp.sum
./x86_64-unknown-linux-gnu/libgo/libgo.sum
./x86_64-unknown-linux-gnu/boehm-gc/testsuite/boehm-gc.sum
./x86_64-unknown-linux-gnu/libatomic/testsuite/libatomic.sum
./x86_64-unknown-linux-gnu/libmudflap/testsuite/libmudflap.sum
./x86_64-unknown-linux-gnu/libitm/testsuite/libitm.sum
./x86_64-unknown-linux-gnu/libjava/testsuite/libjava.sum
./gcc/testsuite/g++/g++.sum
./gcc/testsuite/gnat/gnat.sum
./gcc/testsuite/ada/acats/acats.sum
./gcc/testsuite/gcc/gcc.sum
./gcc/testsuite/gfortran/gfortran.sum
./gcc/testsuite/obj-c++/obj-c++.sum
./gcc/testsuite/go/go.sum
./gcc/testsuite/objc/objc.sum
Getting actual results from build directory clean/bld-gcc
clean/bld-gcc/x86_64-unknown-linux-gnu/libstdc++-v3/testsuite/libstdc++.sum
clean/bld-gcc/x86_64-unknown-linux-gnu/libffi/testsuite/libffi.sum
clean/bld-gcc/x86_64-unknown-linux-gnu/libgomp/testsuite/libgomp.sum
clean/bld-gcc/x86_64-unknown-linux-gnu/libgo/libgo.sum
clean/bld-gcc/x86_64-unknown-linux-gnu/boehm-gc/testsuite/boehm-gc.sum
clean/bld-gcc/x86_64-unknown-linux-gnu/libatomic/testsuite/libatomic.sum
clean/bld-gcc/x86_64-unknown-linux-gnu/libmudflap/testsuite/libmudflap.sum
clean/bld-gcc/x86_64-unknown-linux-gnu/libitm/testsuite/libitm.sum
clean/bld-gcc/x86_64-unknown-linux-gnu/libjava/testsuite/libjava.sum
clean/bld-gcc/gcc/testsuite/g++/g++.sum
clean/bld-gcc/gcc/testsuite/gnat/gnat.sum
clean/bld-gcc/gcc/testsuite/ada/acats/acats.sum
clean/bld-gcc/gcc/testsuite/gcc/gcc.sum
clean/bld-gcc/gcc/testsuite/gfortran/gfortran.sum
clean/bld-gcc/gcc/testsuite/obj-c++/obj-c++.sum
clean/bld-gcc/gcc/testsuite/go/go.sum
clean/bld-gcc/gcc/testsuite/objc/objc.sum
SUCCESS: No unexpected failures.
2012-11-02 Diego Novillo <dnovillo@google.com>
* testsuite-management/validate_failures.py: Add option
--clean_build to compare test results against another
build.
From-SVN: r193105
Remove the unused EXECUTE_IF_SET_IN_SBITMAP_REV, which has an unconventional
interface.
Rename the sbitmap_iter_* functions to match bitmap's bmp_iter_* functions.
Add an additional parameter to the initialization and next functions to
match the interface in bmp_iter_*. This extra parameter is mostly hidden
by the use of the EXECUTE_IF macros.
Rename the EXECUTE_IF_SET_IN_SBITMAP macro to EXECUTE_IF_SET_IN_BITMAP. Its
implementation is now identical to that in bitmap.h. To prevent redefinition
errors, both definitions are now guarded by #ifndef. An alternate strategy
is to simply include bitmap.h from sbitmap.h. As this would increase build
time, I have elected to use the #ifndef version. I do not have a strong
preference here.
The sbitmap_iterator type is still distinctly named because it is often
declared in contexts where the bitmap type is not obvious. There are less
than 40 uses of this type, so the burden to modify it when changing bitmap
types is not large.
Tested on x86-64, config-list.mk testing.
Index: gcc/ChangeLog
2012-10-31 Lawrence Crowl <crowl@google.com>
* sbitmap.h (sbitmap_iter_init): Rename bmp_iter_set_init and add
unused parameter to match bitmap iterator. Update callers.
(sbitmap_iter_cond): Rename bmp_iter_set. Update callers.
(sbitmap_iter_next): Rename bmp_iter_next and add unused parameter to
match bitmap iterator. Update callers.
(EXECUTE_IF_SET_IN_SBITMAP_REV): Remove unused.
(EXECUTE_IF_SET_IN_SBITMAP): Rename EXECUTE_IF_SET_IN_BITMAP and
adjust to be identical to the definition in bitmap.h. Conditionalize
the definition based on not having been defined. Update callers.
* bitmap.h (EXECUTE_IF_SET_IN_BITMAP): Conditionalize the definition
based on not having been defined. (To match the above.)
From-SVN: r193069
This patch adds an xfail manifest for trunk for x86_64 builds. I find
this useful to determine whether my patch has introduced new failures.
The failures in these manifest are always present in trunk and
deciding what to ignore is not very straightforward.
I will keep maintaining this manifest out of clean builds. They are
not hard to maintain. Manifest files can be generated by going to the
top of the build directory and typing:
$ cd <top-of-bld-dir>
$ <path-to-src>/contrib/testsuite-management --produce_manifest
This will generate a .xfail file with the triple name of the target
you just built. Once this file exist you can run the validator again
on the build directory with no arguments. It should produce the
output:
$ cd <top-of-bld-dir>
$ <path-to-src>/contrib/testsuite-management/validate_failures.py
Source directory: <path-to-src>
Build target: x86_64-unknown-linux-gnu
Manifest: <path-to-src>/contrib/testsuite-management/x86_64-unknown-linux-gnu.xfail
Getting actual results from build
./x86_64-unknown-linux-gnu/libstdc++-v3/testsuite/libstdc++.sum
./x86_64-unknown-linux-gnu/libffi/testsuite/libffi.sum
./x86_64-unknown-linux-gnu/libgomp/testsuite/libgomp.sum
./x86_64-unknown-linux-gnu/libgo/libgo.sum
./x86_64-unknown-linux-gnu/boehm-gc/testsuite/boehm-gc.sum
./x86_64-unknown-linux-gnu/libatomic/testsuite/libatomic.sum
./x86_64-unknown-linux-gnu/libmudflap/testsuite/libmudflap.sum
./x86_64-unknown-linux-gnu/libitm/testsuite/libitm.sum
./x86_64-unknown-linux-gnu/libjava/testsuite/libjava.sum
./gcc/testsuite/g++/g++.sum
./gcc/testsuite/gnat/gnat.sum
./gcc/testsuite/ada/acats/acats.sum
./gcc/testsuite/gcc/gcc.sum
./gcc/testsuite/gfortran/gfortran.sum
./gcc/testsuite/obj-c++/obj-c++.sum
./gcc/testsuite/go/go.sum
./gcc/testsuite/objc/objc.sum
SUCCESS: No unexpected failures.
If the output shows new failures, you investigate them. If they are
not yours, you can add them to the xfail manifest (after reporting
them) and then commit the modified .xfail file.
Long term, I would like to have this script pull manifest files from
postings made to gcc-testresults. This way, we won't have to maintain
these .xfail files manually. In branches this is not a big problem,
but in trunk it may be a tad annoying.
From-SVN: r190404
I noticed recently that while the validator was accepting the
'expire=YYYYMMDD' attribute, it was not actually doing anything with
it.
This patch fixes the oversight.
2012-08-13 Diego Novillo <dnovillo@google.com>
* testsuite-management/validate_failures.py: Import datetime.
(TestResult.ExpirationDate): New.
(TestResult.HasExpired): New.
(ParseSummary): Call it. If it returns True, warn that the
expected failure has expired and do not add it to the set of
expected results.
(GetResults): Clarify documentation.
From-SVN: r190351
Some of the hosts were we run this script are still using Python 2.4.
This patch replaces the use of 'with ... as ...' to avoid syntax errors.
2012-07-26 Diego Novillo <dnovillo@google.com>
* testsuite-management/validate_failures.py: Do not use
'with ... as ...' constructs.
From-SVN: r189893
When I added the functionality to use other summary files for
reporting, I broke the generation of manifests. When sum files are
passed on, we need to use the list. Otherwise, we need to find summary
files in the build directory.
This patch factors out that logic into a new function and calls it
from both the reporting and generation routines.
Committed to trunk.
* testsuite-management/validate_failures.py (CollectSumFiles):
Rename from GetSumFiles.
(GetSumFiles): Factor out of CheckExpectedResults.
(CheckExpectedResults): Call it.
(ProduceManifest): Call it.
From-SVN: r189662
This patch adds three new arguments to validate_failures.py so
it can be used outside the build directory:
--ignore_missing_failures
When a failure is expected in the manifest but it is not found in
the actual results, the script produces a note alerting to this
fact. This means that the expected failure has been fixed, or it
did not run, or it may simply be flaky.
With this option, one can ask the script not to show the missing
failures.
--manifest
Name of the manifest file to use. By default, the script will
look for the manifest file in the source directory associated with
this build. With this option, one can point to any arbitrary
manifest file. I renamed the old --manifest flag to
--produce_manifest.
--results
Space-separated list of .sum files with the testing results to
check. The only content needed from these files are the lines
starting with FAIL, XPASS or UNRESOLVED.
From-SVN: r188217
This fixes an edge case in parsing summary lines. Some times, the
description field is missing (e.g., 'FAIL: libstdc++/abi_check'), so
the space that the pattern was looking for does not exist.
I've changed it to match any whitespace, which includes '\n'. I also
made it print the line that it fails to parse, in case there are other
problems like this in the future.
2012-03-02 Diego Novillo <dnovillo@google.com>
* testsuite-management/validate_failures.py (class TestResult): Fix
match pattern for the summary line. If there is a parsing failure,
show the line we failed to parse.
From-SVN: r184822
