2014-10-22 Richard Biener <rguenther@suse.de>
* fold-const.c (fold_binary_loc): Preserve side-effects of
X - X when simplifying to 0.
* stor-layout.c (finish_bitfield_representative): Strip
side-effects of evaluating the difference of two DECL_FIELD_OFFSET.
From-SVN: r216575
When I added support for using soft-fp in libgcc
<https://gcc.gnu.org/ml/gcc-patches/2006-03/msg00689.html>, libgcc
configuration was still done in the gcc/ directory, meaning that the
variables set in makefile fragments could not depend on the multilib
being built. Thus, building the soft-fp code for powerpc64-linux-gnu
was disabled in the same way as had been done with fp-bit: the code
was built, but with #ifndef __powerpc64__ wrappers around it so that
the resulting objects were empty.
Now that libgcc configuration is done in the toplevel libgcc
directory, such uses of softfp_wrap_start / softfp_wrap_end are better
replaced by configure-time conditionals that determine whether to use
soft-fp for a given multilib. This patch does so for
powerpc*-*-linux*. The same would appear to apply to
powerpc*-*-freebsd* (using rs6000/t-freebsd64), but I have not made
any changes there. t-ppc64-fp is also used by AIX targets, but they
don't use soft-fp anyway so the changes are of no consequence to them.
The same principle of replacing softfp_wrap_start / softfp_wrap_end
with configure-time conditionals also applies to
softfp_exclude_libgcc2, which was intended for cases where soft-fp is
being used on hard-float multilibs and so it is desirable on those
multilibs for a few functions to come from libgcc2.c rather than
soft-fp (but the soft-fp versions would be more efficient on
soft-float multilibs). Now we have hardfp.c and t-hardfp, those are
better to use in that case, to minimize the size of the bulk of the
functions that are only present for ABI compatibility and should never
be called by newly compiled code.
I intend followup patches to switch 32-bit hard-float multilibs to use
t-hardfp as far as possible (for all non-libgcc2.c operations for
classic hard float; for all except __unord* for e500v2; for all SFmode
operations except __unordsf2 for e500v1). After that will come making
the soft-fp operations, in the remaining cases for which they are
built because they are actually needed for code compiled by current
GCC, into compat symbols when building for glibc 2.19 or later, so
that the glibc versions (with exception and rounding mode support) get
used instead (2.19 or later is needed for all the functions to be
exported from glibc as non-compat symbols). In turn, that is required
before implementing TARGET_ATOMIC_ASSIGN_EXPAND_FENV for soft-float
and e500, as that can only be properly effective when GCC-compiled
code is actually interoperating correctly with the exception and
rounding mode state used by <fenv.h> functions.
Tested with no regressions with cross to powerpc64-linux-gnu (in
addition, verified that stripped libgcc_s.so.1 is identical before and
after the patch).
* config.host (powerpc*-*-linux*): Only use soft-fp for 32-bit
configurations.
* config/rs6000/t-ppc64-fp (softfp_wrap_start, softfp_wrap_end):
Remove variables.
From-SVN: r216564
PR tree-optimization/63530
tree-vect-data-refs.c (vect_create_addr_base_for_vector_ref): Set
pointer alignment according to DR_MISALIGNMENT.
gcc.dg/vect/pr63530.c: New testcase.
From-SVN: r216562
2014-10-22 Andrew MacLeod <amacleod@redhat.com>
* cfgbuild.h: New. Add prototypes for cfgbuild.c.
* cfgcleanup.h: New. Add prototypes for cfgcleanup.c.
* cfgloopmanip.h: New. Add prototypes for cfgloopmanip.c.
* dominance.h: New. Add prototypes for dominance.c.
* cfgloop.h: Move some prototypes/enum to cfgloopmanip.h and include it.
* cfghooks.h: (struct profile_record) Relocate here.
Relocate 2 prototypes from basic-block.h.
* basic-block.h: Move prototypes and struct to new header files.
Include cfgbuild.h, cfgcleanup.h, and dominance.h.
* rtl.h: Move a few prototypes to new header files.
* cfgcleanup.c (merge_memattrs): Make static.
* genopinit.c (main): Add predict.h to list of includes.
* predict.h: Update prototype list to match predict.c.
* predict.c (maybe_hot_count_p): Export.
(cgraph_edge::maybe_hot_p): Move to cgraph.c.
(cgraph_node::optimize_for_size_p): Move to cgraph.h.
* cgraph.h (cgraph_node::optimize_for_size_p): Relocate here.
* cgraph.c (cgraph_edge::maybe_hot_p): Relocate here.
* profile.h: Adjust prototypes.
* ifcvt.h: New. Relocate struct ce_if_block here.
* ifcvt.c: Include ifcvt.h.
* config/frv/frv.c: Include ifcvt.h.
* config/frv/frv-protos.h: Add 'struct' to ce_if_block * parameters.
From-SVN: r216559
gcc/
* lra.c (lra): Remove call to recog_init.
* config/i386/i386.md (preferred_for_speed): New attribute
(*float<SWI48:mode><MODEF:mode>2_sse): Override it instead of
"enabled". Remove check for sched1.
gcc/testsuite/
* gcc.target/i386/conversion-2.c: New test.
From-SVN: r216557
PR target/63594
* config/i386/i386.c (ix86_expand_vector_init_duplicate): For
V{8HI,16QI,16HI,32QI}mode call ix86_vector_duplicate_value
even for just TARGET_AVX2, not only for
TARGET_AVX512VL && TARGET_AVX512BW. For V{32HI,64QI}mode,
call ix86_vector_duplicate_value only if TARGET_AVX512BW,
otherwise build it using concatenation of 256-bit
broadcast.
* config/i386/sse.md (AVX_VEC_DUP_MODE): Moved after
avx512 broadcast patterns.
(vec_dup<mode>): Likewise. For avx2 use
v<sseintprefix>broadcast<bcstscalarsuff> instead of
vbroadcast<ssescalarmodesuffix>.
(AVX2_VEC_DUP_MODE): New mode iterator.
(*vec_dup<mode>): New TARGET_AVX2 define_insn with
AVX2_VEC_DUP_MODE iterator, add a splitter for that.
* gcc.dg/pr63594-1.c: New test.
* gcc.dg/pr63594-2.c: New test.
* gcc.target/i386/sse2-pr63594-1.c: New test.
* gcc.target/i386/sse2-pr63594-2.c: New test.
* gcc.target/i386/avx-pr63594-1.c: New test.
* gcc.target/i386/avx-pr63594-2.c: New test.
* gcc.target/i386/avx2-pr63594-1.c: New test.
* gcc.target/i386/avx2-pr63594-2.c: New test.
* gcc.target/i386/avx512f-pr63594-1.c: New test.
* gcc.target/i386/avx512f-pr63594-2.c: New test.
* gcc.target/i386/avx512f-vec-init.c: Adjust expected
insn counts.
From-SVN: r216541
PR target/63542
* config/i386/i386.c (ix86_pic_register_p): Also return
true if x is a hard register with ORIGINAL_REGNO equal to
pic_offset_table_rtx pseudo REGNO.
(ix86_delegitimize_address): For ix86_use_pseudo_pic_reg ()
after reload, subtract GOT_SYMBOL_NAME symbol if possible.
* gcc.target/i386/pr63542-1.c: New test.
* gcc.target/i386/pr63542-2.c: New test.
From-SVN: r216540
gcc:
2014-10-21 Joern Rennecke <joern.rennecke@embecosm.com>
Vidya Praveen <vidya.praveen@atmel.com>
Praveen Kumar Kaushik <Praveen_Kumar.Kaushik@atmel.com>
Senthil Kumar Selvaraj <Senthil_Kumar.Selvaraj@atmel.com>
Pitchumani Sivanupandi <Pitchumani.S@atmel.com>
* config/avr/avr-c.c (avr_cpu_cpp_builtins): Don't define
__MEMX for avrtiny.
* config/avr/avr.c (avr_insert_attributes): Reject __memx for avrtiny.
(avr_nonconst_pointer_addrspace): Likewise.
* config/avr/avr.h (AVR_HAVE_LPM): Define.
Added AVRTINY architecture to avr target.
* config/avr/avr-arch.h (avr_arch): Added AVRTINY architecture.
(base_arch_s): member added for AVRTINY architecture.
* config/avr/avr.c: Added TINY_ADIW, TINY_SBIW macros as AVRTINY
alternate for adiw/sbiw instructions. Added AVR_TMP_REGNO and
AVR_ZERO_REGNO macros for tmp and zero registers. Replaced TMP_REGNO
and ZERO_REGNO occurrences by AVR_TMP_REGNO and AVR_ZERO_REGNO
respectively. LAST_CALLEE_SAVED_REG macro added for the last register
in callee saved register list.
(avr_option_override): CCP address updated for AVRTINY.
(avr_init_expanders): tmp and zero rtx initialized as per arch.
Reset avr_have_dimode if AVRTINY.
(sequent_regs_live): Use LAST_CALLEE_SAVED_REG instead magic number.
(emit_push_sfr): Use AVR_TMP_REGNO for tmp register number.
(avr_prologue_setup_frame): Don't minimize prologue if AVRTINY.
Use LAST_CALLEE_SAVED_REG to refer last callee saved register.
(expand_epilogue): Likewise.
(avr_print_operand): Print CCP address in case of AVRTINY also.
<TBD>bad address
(function_arg_regno_p): Check different register list for arguments
if AVRTINY.
(init_cumulative_args): Check for AVRTINY to update number of argument
registers.
(tiny_valid_direct_memory_access_range): New function. Return false if
direct memory access range is not in accepted range for AVRTINY.
(avr_out_movqi_r_mr_reg_disp_tiny): New function to handle register
indirect load (with displacement) for AVRTINY.
(out_movqi_r_mr): Updated instruction length for AVRTINY. Call
avr_out_movqi_r_mr_reg_disp_tiny for load from reg+displacement.
(avr_out_movhi_r_mr_reg_no_disp_tiny): New function to handle register
indirect load (no displacement) for AVRTINY.
(avr_out_movhi_r_mr_reg_disp_tiny): New function to handle register
indirect load (with displacement) for AVRTINY.
(avr_out_movhi_r_mr_pre_dec_tiny): New function to handle register
indirect load for pre-decrement address.
(out_movhi_r_mr): In case of AVRTINY, call tiny register indirect load
functions. Update instruction length for AVRTINY.
(avr_out_movsi_r_mr_reg_no_disp_tiny): New function. Likewise, for
SImode.
(avr_out_movsi_r_mr_reg_disp_tiny): New function. Likewise, for SImode.
(out_movsi_r_mr): Likewise, for SImode.
(avr_out_movsi_mr_r_reg_no_disp_tiny): New function to handle register
indirect store (no displacement) for AVRTINY.
(avr_out_movsi_mr_r_reg_disp_tiny): New function to handle register
indirect store (with displacement) for AVRTINY.
(out_movsi_mr_r): Emit out insn for IO address store. Update store
instruction's size for AVRTINY. For AVRTINY, call tiny SImode indirect
store functions.
(avr_out_load_psi_reg_no_disp_tiny): New function to handle register
indirect load (no displacement) for PSImode in AVRTINY.
(avr_out_load_psi_reg_disp_tiny): New function to handle register
indirect load (with displacement) for PSImode in AVRTINY.
(avr_out_load_psi): Call PSImode register indirect load functions for
AVRTINY. Update instruction length for AVRTINY.
(avr_out_store_psi_reg_no_disp_tiny): New function to handle register
indirect store (no displacement) for PSImode in AVRTINY.
(avr_out_store_psi_reg_disp_tiny): New function to handle register
indirect store (with displacement) for PSImode in AVRTINY.
(avr_out_store_psi): Update instruction length for AVRTINY. Call tiny
register indirect store functions for AVRTINY.
(avr_out_movqi_mr_r_reg_disp_tiny): New function to handle QImode
register indirect store (with displacement) for AVRTINY.
(out_movqi_mr_r): Update instruction length for AVRTINY. Call tiny
register indirect store function for QImode in AVRTINY.
(avr_out_movhi_mr_r_xmega): Update instruction length for AVRTINY.
(avr_out_movhi_mr_r_reg_no_disp_tiny): New function to handle register
indirect store (no displacement) for HImode in AVRTINY.
(avr_out_movhi_mr_r_reg_disp_tiny): New function to handle register
indirect store (with displacement) for HImode in AVRTINY.
(avr_out_movhi_mr_r_post_inc_tiny): New function to handle register
indirect store for post-increment address in HImode.
(out_movhi_mr_r): Update instruction length for AVRTINY. Call tiny
register indirect store function for HImode in AVRTINY.
(avr_out_compare): Use TINY_SBIW/ TINY_ADIW in place of sbiw/adiw
in case of AVRTINY.
(order_regs_for_local_alloc): Updated register allocation order for
AVRTINY.
(avr_conditional_register_usage): New function. It is a target hook
(TARGET_CONDITIONAL_REGISTER_USAGE) function which updates fixed, call
used registers list and register allocation order for AVRTINY.
(avr_return_in_memory): Update return value size for AVRTINY.
* config/avr/avr-c.c (avr_cpu_cpp_builtins): Added builtin macros
for AVRTINY arch and tiny program memory base address.
* config/avr/avr-devices.c (avr_arch_types): Added AVRTINY arch.
(avr_texinfo): Added description for AVRTINY arch.
* config/avr/avr.h: Added macro to identify AVRTINY arch. Updated
STATIC_CHAIN_REGNUM for AVRTINY.
* config/avr/avr-mcus.def: Added AVRTINY arch devices.
* config/avr/avr.md: Added constants for tmp/ zero registers in
AVRTINY. Attributes for AVRTINY added.
(mov<mode>): Move src/ dest address to register if it is not in AVRTINY
memory access range.
(mov<mode>_insn): Avoid QImode direct load for AVRTINY if address not
in AVRTINY memory access range.
(*mov<mode>): Likewise for HImode and SImode.
(*movsf): Likewise for SFmode.
(delay_cycles_2): Updated instructions to be emitted as AVRTINY does
not have sbiw.
* config/avr/avr-protos.h: Added function prototype for
tiny_valid_direct_memory_access_range.
* config/avr/avr-tables.opt: Regenerate.
* gcc/config/avr/t-multilib: Regenerate.
* doc/avr-mmcu.texi: Regenerate.
gcc/testsuite:
2014-10-21 Joern Rennecke <joern.rennecke@embecosm.com>
* gcc.target/avr/tiny-memx.c: New test.
* gcc.target/avr/tiny-caller-save.c: New test.
libgcc:
2014-10-21 Joern Rennecke <joern.rennecke@embecosm.com>
Vidya Praveen <vidya.praveen@atmel.com>
Praveen Kumar Kaushik <Praveen_Kumar.Kaushik@atmel.com>
Senthil Kumar Selvaraj <Senthil_Kumar.Selvaraj@atmel.com>
Pitchumani Sivanupandi <Pitchumani.S@atmel.com>
* config/avr/lib1funcs.S (__do_global_dtors): Go back to descending
order.
Updated library functions for AVRTINY arch.
* config/avr/lib1funcs.S: Updated zero/tmp regs for AVRTINY.
Replaced occurrences of r0/r1 with tmp/zero reg macros.
Added wsubi/ wadi macros that expands conditionally as sbiw/ adiw
or AVRTINY equivalent. Replaced occurrences of sbiw/adiw with
wsubi/wadi macors.
(__mulsi3_helper): Update stack, preserve callee saved regs and
argument from stack. Restore callee save registers.
(__mulpsi3): Likewise.
(__muldi3, __udivmodsi4, __divmodsi4, __negsi2, __umoddi3, __udivmod64,
__moddi3, __adddi3, __adddi3_s8, __subdi3, __cmpdi2, __cmpdi2_s8,
__negdi2, __prologue_saves__, __epilogue_restores__): Excluded for
AVRTINY.
(__tablejump2__): Added lpm equivalent instructions for AVRTINY.
(__do_copy_data): Added new definition for AVRTINY.
(__do_clear_bss): Replace r17 by r18 to preserve zero reg for AVRTINY.
(__load_3, __load_4, __xload_1, __xload_2, __xload_3,
__xload_4, __movmemx_qi, __movmemx_hi): Excluded for AVRTINY.
* config/avr/lib1funcs-fixed.S: Replaced occurrences of r0/r1 with
tmp/zero reg macros. Replaced occurrences of sbiw/adiw with wsubi/wadi
macors.
* config/avr/t-avr (LIB1ASMFUNCS): Remove unsupported functions for
AVRTINY.
Fix broken long multiplication on tiny arch.
Co-Authored-By: Pitchumani Sivanupandi <pitchumani.s@atmel.com>
Co-Authored-By: Praveen Kumar Kaushik <Praveen_Kumar.Kaushik@atmel.com>
Co-Authored-By: Senthil Kumar Selvaraj <Senthil_Kumar.Selvaraj@atmel.com>
Co-Authored-By: Vidya Praveen <vidya.praveen@atmel.com>
From-SVN: r216525
2014-10-21 Andrew Pinski <apinski@cavium.com>
* doc/invoke.texi (AARCH64/mtune): Document thunderx as an
available option also.
* config/aarch64/aarch64-cost-tables.h: New file.
* config/aarch64/aarch64-cores.def (thunderx): New core.
* config/aarch64/aarch64-tune.md: Regenerate.
* config/aarch64/aarch64.c: Include aarch64-cost-tables.h instead
of config/arm/aarch-cost-tables.h.
(thunderx_regmove_cost): New variable.
(thunderx_tunings): New variable.
From-SVN: r216524
gcc/ChangeLog:
* cgraph.c (cgraph_c_finalize): New function.
* cgraph.h (cgraph_c_finalize): New prototype.
(cgraphunit_c_finalize): New prototype.
* cgraphunit.c (first_analyzed): Move from analyze_functions
to file-scope.
(first_analyzed_var): Likewise.
(analyze_functions): Move static variables into file-scope.
(cgraphunit_c_finalize): New function.
* diagnostic.c (diagnostic_finish): Free the memory for
context->classify_diagnostic and context->printer, running the
destructor for the latter.
(bt_stop): Use toplev::main.
* dwarf2out.c (dwarf2out_finalize): New function.
* dwarf2out.h (dwarf2out_c_finalize): New prototype.
* gcse.c (gcse_c_finalize): New function.
* gcse.h (gcse_c_finalize): New prototype.
* ggc-page.c (init_ggc): Make idempotent.
* input.c (input_location): Initialize to UNKNOWN_LOCATION.
* ipa-cp.c (ipa_cp_c_finalize): New function.
* ipa-prop.h (ipa_cp_c_finalize): New prototype.
* ipa-pure-const.c (function_insertion_hook_holder): Move to be
a field of class pass_ipa_pure_const.
(node_duplication_hook_holder): Likewise.
(node_removal_hook_holder): Likewise.
(register_hooks): Convert to method...
(pass_ipa_pure_const::register_hooks): ...here, converting
static variable init_p into...
(pass_ipa_pure_const::init_p): ...new field.
(pure_const_generate_summary): Update invocation of
register_hooks to invoke as a method of current_pass.
(pure_const_read_summary): Likewise.
(propagate): Convert to...
(pass_ipa_pure_const::execute): ...method.
* ipa-reference.c (ipa_init): Move static bool init_p from here
to...
(ipa_init_p): New file-scope variable, so that it can be reset
when repeatedly invoking the compiler within one process by...
(ipa_reference_c_finalize): New function.
* ipa-reference.h (ipa_reference_c_finalize): New.
* main.c (main): Replace invocation of toplev_main with
construction of a toplev instance, and call its "main" method.
* params.c (global_init_params): Add an assert that
params_finished is false.
(params_c_finalize): New.
* params.h (params_c_finalize): New.
* passes.c (execute_ipa_summary_passes): Set "current_pass" before
invoking generate_summary, for the benefit of pass_ipa_pure_const.
(ipa_write_summaries_2): Assign "pass" to "current_pass" global
before calling write_summary hook.
(ipa_write_optimization_summaries_1): Likewise when calling
write_optimization_summary hook.
(ipa_read_summaries_1): Likewise for read_summary hook.
(ipa_read_optimization_summaries_1): Likewise for
read_optimization_summary hook.
(execute_ipa_stmt_fixups): Likewise.
* stringpool.c (init_stringpool): Clean up if we're called more
than once.
* timevar.c (timevar_init): Ignore repeated calls.
* toplev.c: Include "dwarf2out.h", "ipa-reference.h", "gcse.h",
"ipa-prop.h".
(general_init): Reset "input_location" to UNKNOWN_LOCATION.
(initialize_rtl): Move static local "initialized_once"
into file scope, and rename to...
(rtl_initialized): New variable.
(do_compile): Move timevar initialization from here to
toplev::start_timevars.
(toplev::toplev, toplev::~toplev, toplev::start_timevars,
toplev::finalize): New functions.
(toplev_main): Rename to...
(toplev::main): ...this.
* toplev.h (class toplev): New class.
From-SVN: r216522
The language used to forbid assigning structs with hidden
fields, but that was changed before the Go 1 release. At the
time the change was experimental, so I left the old code in
the compiler. At this point it's clearly not experimental, so
this removes the unused code.
From-SVN: r216519
PR tree-optimization/63563
* tree-vect-data-refs.c (vect_analyze_data_ref_accesses): Bail out
if either dra or drb stmts are not normal loads/stores.
* gcc.target/i386/pr63563.c: New test.
From-SVN: r216507
