This adds support for __sync_val_compare_and_swap and
__sync_bool_compare_and_swap for 1-byte and 2-byte long
values, which are not natively supported on nvptx.
Build and reg-tested on nvptx.
Build and reg-tested libgomp on x86_64 with nvptx accelerator.
2020-07-16 Kwok Cheung Yeung <kcy@codesourcery.com>
libgcc/
* config/nvptx/atomic.c: New.
* config/nvptx/t-nvptx (LIB2ADD): Add atomic.c.
gcc/testsuite/
* gcc.target/nvptx/ia64-sync-5.c: New.
libgomp/
* testsuite/libgomp.c-c++-common/reduction-16.c: New.
This accomodates increased space required by use of the xsavec
instruction in the dynamic linker trampoline.
libgcc/ChangeLog:
* config/i386/morestack.S (BACKOFF) [x86_64]: Add 2048 bytes.
As mentioned in the PR, the fallback path when LSE is unavailable writes
incorrect registers to the memory if the previous content compares equal
to x0, x1 - it writes copy of x0, x1 from the start of function, but it
should write x2, x3.
2020-08-03 Jakub Jelinek <jakub@redhat.com>
PR target/96402
* config/aarch64/lse.S (__aarch64_cas16_acq_rel): Use x2, x3 instead
of x(tmp0), x(tmp1) in STXP arguments.
* gcc.target/aarch64/pr96402.c: New test.
Rewrite code sequences throughout the 64-bit RISC-V `__riscv_save_*'
routines replacing `li t1, -48', `li t1, -64', and `li t1, -80',
instructions, which do not have a compressed encoding, respectively with
`li t1, 3', `li t1, 4', and `li t1, 4', which do, and then adjusting the
remaining code accordingly observing that `sub sp, sp, t1' takes the
same amount of space as an `slli t1, t1, 4'/`add sp, sp, t1' instruction
pair does, again due to the use of compressed encodings, saving 6 bytes
total.
This change does increase code size by 4 bytes for RISC-V processors
lacking the compressed instruction set, however their users couldn't
care about the code size or they would have chosen an implementation
that does have the compressed instructions, wouldn't they?
libgcc/
* config/riscv/save-restore.S [__riscv_xlen == 64]
(__riscv_save_10, __riscv_save_8, __riscv_save_6, __riscv_save_4)
(__riscv_save_2): Replace negative immediates used for the final
stack pointer adjustment with positive ones, right-shifted by 4.
This note is not used anywhere currently but it is supposed to mark
objects if the return address is protected with PAC on the stack.
Since lse.S only has leaf functions the return address is never
saved on the stack so we can add the note.
The note is only added if pac-ret is enabled because it can cause
problems with old linkers and we don't have checks for that. This
can be changed later to be unconditional, for now it is consistent
with how gcc generates the notes.
libgcc/ChangeLog:
* config/aarch64/lse.S: Add PAC property note.
The FAT libraries config fragments need to know which library is native
and which is a multilib to choose the correct multilib from which to
append the additional object file or shared object file. Testing the
top-level archive is fragile because it will fail if rebuilding. This
patch tests the compiler preprocessing macros for the 64 bit AIX specific
__64BIT__ to determine the native mode of the compiler in MULTILIBTOP.
2020-07-14 David Edelsohn <dje.gcc@gmail.com>
libatomic/ChangeLog
* config/t-aix: Set BITS from compiler cpp macro.
libgcc/ChangeLog
* config/rs6000/t-slibgcc-aix: Set BITS from compiler cpp macro.
libgfortran/ChangeLog
* config/t-aix: Set BITS from compiler cpp macro.
libgomp/ChangeLog
* config/t-aix: Set BITS from compiler cpp macro.
libstdc++-v3/ChangeLog
* config/os/aix/t-aix: Set BITS from compiler cpp macro.
Mangling, currently only used on AArch64 for return address signing,
is an internal representation that should not be exposed via
__builtin_return_address return value,
__builtin_eh_return handler argument,
_Unwind_DebugHook handler argument.
Note that a mangled address might not even fit into a void *, e.g.
with AArch64 ilp32 ABI the return address is stored as 64bit, so
the mangled return address cannot be accessed via _Unwind_GetPtr.
This patch changes the unwinder hooks as follows:
MD_POST_EXTRACT_ROOT_ADDR is removed: root address comes from
__builtin_return_address which is not mangled.
MD_POST_EXTRACT_FRAME_ADDR is renamed to MD_DEMANGLE_RETURN_ADDR,
it now operates on _Unwind_Word instead of void *, so the hook
should work when return address signing is enabled on AArch64 ilp32.
(But for that __builtin_aarch64_autia1716 should be fixed to operate
on 64bit input instead of a void *.)
MD_POST_FROB_EH_HANDLER_ADDR is removed: it is the responsibility of
__builtin_eh_return to do the mangling if necessary.
2020-07-13 Szabolcs Nagy <szabolcs.nagy@arm.com>
libgcc/ChangeLog:
PR target/94891
* config/aarch64/aarch64-unwind.h (MD_POST_EXTRACT_ROOT_ADDR): Remove.
(MD_POST_FROB_EH_HANDLER_ADDR): Remove.
(MD_POST_EXTRACT_FRAME_ADDR): Rename to ...
(MD_DEMANGLE_RETURN_ADDR): This.
(aarch64_post_extract_frame_addr): Rename to ...
(aarch64_demangle_return_addr): This.
(aarch64_post_frob_eh_handler_addr): Remove.
* unwind-dw2.c (uw_update_context): Demangle return address.
(uw_frob_return_addr): Remove.
lse.S did not have the GNU property note markup and the BTI c
instructions that are necessary when it is built with branch
protection.
The notes are only added when libgcc is built with branch
protection, because old linkers mishandle the note (merge
them incorrectly or emit warnings), the BTI instructions
are added unconditionally.
Note: BTI c is only necessary at function entry if the function
may be called indirectly, currently lse functions are not called
indirectly, but BTI is added for ABI reasons e.g. to allow
linkers later to emit stub code with indirect jump.
2020-07-09 Szabolcs Nagy <szabolcs.nagy@arm.com>
libgcc/ChangeLog:
PR target/96001
* config/aarch64/lse.S: Add BTI marking and related definitions,
and add BTI c to function entries.
lse.S did not have GNU stack note, this may cause missing
PT_GNU_STACK in binaries on Linux and FreeBSD.
2020-07-09 Szabolcs Nagy <szabolcs.nagy@arm.com>
libgcc/ChangeLog:
* config/aarch64/lse.S: Add stack note.
gcc/ChangeLog:
PR gcov-profile/95348
* coverage.c (read_counts_file): Read only COUNTERS that are
not all-zero.
* gcov-dump.c (tag_function): Change signature from unsigned to
signed integer.
(tag_blocks): Likewise.
(tag_arcs): Likewise.
(tag_lines): Likewise.
(tag_counters): Likewise.
(tag_summary): Likewise.
* gcov.c (read_count_file): Read all non-zero counters
sensitively.
libgcc/ChangeLog:
PR gcov-profile/95348
* libgcov-driver.c (merge_one_data): Merge only profiles
that are not of non-zero type.
(write_one_data): Write counters only if there's one non-zero
value.
* libgcov-util.c (tag_function): Change signature from unsigned
to int.
(tag_blocks): Likewise.
(tag_arcs): Likewise.
(tag_counters): Likewise.
(tag_summary): Likewise.
(tag_lines): Read only if COUNTERS is non-zero.
(read_gcda_file): Handle negative length for COUNTERS type.
libgcc/ChangeLog:
* libgcov-driver.c (merge_summary): Remove function as its name
is misleading and doing something different.
(dump_one_gcov): Add ATTRIBUTE_UNUSED for 2 args. Take read summary
in gcov-tool.
* libgcov-util.c (curr_object_summary): Remove.
(read_gcda_file): Remove unused curr_object_summary.
(gcov_merge): Merge summaries.
* libgcov.h: Add summary argument for gcov_info struct.
Both x86 backend and libgcc define enum processor_features. libgcc sets
enum processor_feature and x86 backend checks enum processor_feature.
They are very easy out of sync and it has happened multiple times in the
past.
1. Move cpuinfo.h from libgcc to common/config/i386 so that we can share
the same enum processor_features in x86 backend and libgcc.
2. Change __cpu_features2 to an array to support more processor features.
3. Add more processor features to enum processor_features.
gcc/
PR target/95259
* common/config/i386/cpuinfo.h: New file.
(__processor_model): Moved from libgcc/config/i386/cpuinfo.h.
(__processor_model2): New.
(CHECK___builtin_cpu_is): New. Defined as empty if not defined.
(has_cpu_feature): New function.
(set_cpu_feature): Likewise.
(get_amd_cpu): Moved from libgcc/config/i386/cpuinfo.c. Use
CHECK___builtin_cpu_is. Return AMD CPU name.
(get_intel_cpu): Moved from libgcc/config/i386/cpuinfo.c. Use
Use CHECK___builtin_cpu_is. Return Intel CPU name.
(get_available_features): Moved from libgcc/config/i386/cpuinfo.c.
Also check FEATURE_3DNOW, FEATURE_3DNOWP, FEATURE_ADX,
FEATURE_ABM, FEATURE_CLDEMOTE, FEATURE_CLFLUSHOPT, FEATURE_CLWB,
FEATURE_CLZERO, FEATURE_CMPXCHG16B, FEATURE_CMPXCHG8B,
FEATURE_ENQCMD, FEATURE_F16C, FEATURE_FSGSBASE, FEATURE_FXSAVE,
FEATURE_HLE, FEATURE_IBT, FEATURE_LAHF_LM, FEATURE_LM,
FEATURE_LWP, FEATURE_LZCNT, FEATURE_MOVBE, FEATURE_MOVDIR64B,
FEATURE_MOVDIRI, FEATURE_MWAITX, FEATURE_OSXSAVE,
FEATURE_PCONFIG, FEATURE_PKU, FEATURE_PREFETCHWT1, FEATURE_PRFCHW,
FEATURE_PTWRITE, FEATURE_RDPID, FEATURE_RDRND, FEATURE_RDSEED,
FEATURE_RTM, FEATURE_SERIALIZE, FEATURE_SGX, FEATURE_SHA,
FEATURE_SHSTK, FEATURE_TBM, FEATURE_TSXLDTRK, FEATURE_VAES,
FEATURE_WAITPKG, FEATURE_WBNOINVD, FEATURE_XSAVE, FEATURE_XSAVEC,
FEATURE_XSAVEOPT and FEATURE_XSAVES
(cpu_indicator_init): Moved from libgcc/config/i386/cpuinfo.c.
Also update cpu_model2.
* common/config/i386/i386-cpuinfo.h (processor_vendor): Add
Add VENDOR_CENTAUR, VENDOR_CYRIX and VENDOR_NSC.
(processor_features): Moved from gcc/config/i386/i386-builtins.c.
Renamed F_XXX to FEATURE_XXX. Add FEATURE_3DNOW, FEATURE_3DNOWP,
FEATURE_ADX, FEATURE_ABM, FEATURE_CLDEMOTE, FEATURE_CLFLUSHOPT,
FEATURE_CLWB, FEATURE_CLZERO, FEATURE_CMPXCHG16B,
FEATURE_CMPXCHG8B, FEATURE_ENQCMD, FEATURE_F16C,
FEATURE_FSGSBASE, FEATURE_FXSAVE, FEATURE_HLE, FEATURE_IBT,
FEATURE_LAHF_LM, FEATURE_LM, FEATURE_LWP, FEATURE_LZCNT,
FEATURE_MOVBE, FEATURE_MOVDIR64B, FEATURE_MOVDIRI,
FEATURE_MWAITX, FEATURE_OSXSAVE, FEATURE_PCONFIG,
FEATURE_PKU, FEATURE_PREFETCHWT1, FEATURE_PRFCHW,
FEATURE_PTWRITE, FEATURE_RDPID, FEATURE_RDRND, FEATURE_RDSEED,
FEATURE_RTM, FEATURE_SERIALIZE, FEATURE_SGX, FEATURE_SHA,
FEATURE_SHSTK, FEATURE_TBM, FEATURE_TSXLDTRK, FEATURE_VAES,
FEATURE_WAITPKG, FEATURE_WBNOINVD, FEATURE_XSAVE, FEATURE_XSAVEC,
FEATURE_XSAVEOPT, FEATURE_XSAVES and CPU_FEATURE_MAX.
(SIZE_OF_CPU_FEATURES): New.
* config/i386/i386-builtins.c (processor_features): Removed.
(isa_names_table): Replace F_XXX with FEATURE_XXX.
(fold_builtin_cpu): Change __cpu_features2 to an array.
libgcc/
PR target/95259
* config/i386/cpuinfo.c: Don't include "cpuinfo.h". Include
"common/config/i386/i386-cpuinfo.h" and
"common/config/i386/cpuinfo.h".
(__cpu_features2): Changed to array.
(get_amd_cpu): Removed.
(get_intel_cpu): Likewise.
(get_available_features): Likewise.
(__cpu_indicator_init): Call cpu_indicator_init.
* config/i386/cpuinfo.h: Removed.
GNU Make supports "-include" keyword to prevent warnings and errors due to
inclusion of non-existent files. This patch changes gcc/ and libgcc/ to use
"-include" in place of the historical conditional inclusion and use of
empty.mk work-arounds.
gcc/ChangeLog
2020-06-23 David Edelsohn <dje.gcc@gmail.com>
* Makefile.in (LANG_MAKEFRAGS): Same.
(tmake_file): Use -include.
(xmake_file): Same.
libgcc/ChangeLog
2020-06-23 David Edelsohn <dje.gcc@gmail.com>
* Makefile.in: Remove uses of empty.mk. Use -include.
* config/avr/t-avr: Use -include.
* empty.mk: Delete.
libgcc/config/avr/libf7/ChangeLog
2020-06-23 David Edelsohn <dje.gcc@gmail.com>
* t-libf7: Same.
This patch adds the ability to configure GCC on AIX to build as a
64 bit application and to build target libraries "FAT" libraries in both
32 bit and 64 bit mode.
The patch adds makefile fragment hooks to target libraries that allows
them to include target-specific rules. The target specific rules for
AIX place both 32 bit and 64 bit objects and shared objects
in archives at the top-level, not multilib subdirectories. The
multilibs are built in subdirectories, but must be combined during the
last parts of the target library build process. Because of the way
that GCC bootstrap works, the libraries must be combined during the
multiple stages of GCC bootstrap, not solely when installed in the
final destination, so the libraries are correct at the end of
each target library build stage, not solely an install recipe.
gcc/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.gcc: Use t-aix64, biarch64 and default64 for cpu_is_64bit.
* config/rs6000/aix72.h (ASM_SPEC): Remove aix64 option.
(ASM_SPEC32): New.
(ASM_SPEC64): New.
(ASM_CPU_SPEC): Remove vsx and altivec options.
(CPP_SPEC_COMMON): Rename from CPP_SPEC.
(CPP_SPEC32): New.
(CPP_SPEC64): New.
(CPLUSPLUS_CPP_SPEC): Rename to CPLUSPLUS_CPP_SPEC_COMMON..
(TARGET_DEFAULT): Only define if not BIARCH.
(LIB_SPEC_COMMON): Rename from LIB_SPEC.
(LIB_SPEC32): New.
(LIB_SPEC64): New.
(LINK_SPEC_COMMON): Rename from LINK_SPEC.
(LINK_SPEC32): New.
(LINK_SPEC64): New.
(STARTFILE_SPEC): Add 64 bit version of crtcxa and crtdbase.
(ASM_SPEC): Define 32 and 64 bit alternatives using DEFAULT_ARCH64_P.
(CPP_SPEC): Same.
(CPLUSPLUS_CPP_SPEC): Same.
(LIB_SPEC): Same.
(LINK_SPEC): Same.
(SUBTARGET_EXTRA_SPECS): Add new 32/64 specs.
* config/rs6000/defaultaix64.h: New file.
* config/rs6000/t-aix64: New file.
libgcc/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.host (extra_parts): Add crtcxa_64 and crtdbase_64.
* config/rs6000/t-aix-cxa: Explicitly compile 32 bit with -maix32
and 64 bit with -maix64.
* config/rs6000/t-slibgcc-aix: Remove extra @multilib_dir@ level.
Build and install AIX-style FAT libraries.
libgomp/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.tgt (powerpc-ibm-aix*): Define tmake_file.
* config/t-aix: New file.
libstdc++-v3/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.host (aix*): Define tmake_file.
* config/os/aix/t-aix: New file.
libatomic/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.tgt (powerpc-ibm-aix*): Define tmake_file.
* config/t-aix: New file.
libgfortran/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.host: Add system configury stanza. Define tmake_file.
* config/t-aix: New file.
libgcc/
* config.host (md_unwind_header) <i[34567]86-*-gnu*>: Set to
'i386/gnu-unwind.h'
* config/i386/gnu-unwind.h: New file.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
libgcc/ChangeLog:
* libgcov-util.c (read_gcda_finalize): Remove const operator.
(merge_wrapper): Add both counts and use them properly.
(topn_to_memory_representation): New function.
(gcov_merge): Covert on disk representation to in memory
representation.
* libgcov.h: Remove const operator.
The patch fixes tree-prof.exp tests on solaris11 and i686-linux-gnu,
problem was that sizeof of a pointer is different from sizeof gcov_type.
I'm going to install it if there are no objections.
Thanks,
Martin
libgcc/ChangeLog:
PR gcov-profile/95494
* libgcov-driver.c (write_top_counters): Cast first to
intptr_t as sizeof(*) != sizeof(gcov_type).
* libgcov.h (gcov_counter_set_if_null): Remove.
(gcov_topn_add_value): Cast first to intptr_t and update
linked list directly.
Rewrite uw_install_context without function calls to avoid register
spilling in _Unwind_RaiseException during return context installation.
2020-06-08 Max Filippov <jcmvbkbc@gmail.com>
gcc/testsuite/
* g++.target/xtensa/pr95571.C: New test.
* g++.target/xtensa/xtensa.exp: New testsuite.
libgcc/
* config/xtensa/unwind-dw2-xtensa.c (uw_install_context): Merge
with uw_install_context_1.
We must guard used atomic builtins with GCOV_SUPPORTS_ATOMIC.
The patch is tested on AIX and I'm going to push it.
libgcc/ChangeLog:
PR gcov-profile/95480
* libgcov-profiler.c (GCOV_SUPPORTS_ATOMIC): Move to...
* libgcov.h (GCOV_SUPPORTS_ATOMIC): ...here.
(gcov_counter_add): Use GCOV_SUPPORTS_ATOMIC guard.
(gcov_counter_set_if_null): Likewise.
The ISA manual specifies that divide by zero always returns -1 as the result.
We were failing to do that when the dividend was negative.
Original patch from Virginie Moser.
libgcc/
* config/riscv/div.S (__divdi3): For negative arguments, change bgez
to bgtz.
The calloc was in the original tested version of the patch
and I made accidental last minute change.
Installed to master as obvious.
libgcc/ChangeLog:
* libgcov.h (gcov_topn_add_value): Use xcalloc instead
of xmalloc.
gcc/ChangeLog:
* coverage.c (get_coverage_counts): Skip sanity check for TOP N counters
as they have variable number of counters.
* gcov-dump.c (main): Add new option -r.
(print_usage): Likewise.
(tag_counters): All new raw format.
* gcov-io.h (struct gcov_kvp): New.
(GCOV_TOPN_VALUES): Remove.
(GCOV_TOPN_VALUES_COUNTERS): Likewise.
(GCOV_TOPN_MEM_COUNTERS): New.
(GCOV_TOPN_DISK_COUNTERS): Likewise.
(GCOV_TOPN_MAXIMUM_TRACKED_VALUES): Likewise.
* ipa-profile.c (ipa_profile_generate_summary): Use
GCOV_TOPN_MAXIMUM_TRACKED_VALUES.
(ipa_profile_write_edge_summary): Likewise.
(ipa_profile_read_edge_summary): Likewise.
(ipa_profile): Remove usage of GCOV_TOPN_VALUES.
* profile.c (sort_hist_values): Sort variable number
of counters.
(compute_value_histograms): Special case for TOP N counters
that have dynamic number of key-value pairs.
* value-prof.c (dump_histogram_value): Dump variable number
of key-value pairs.
(stream_in_histogram_value): Stream in variable number
of key-value pairs for TOP N counter.
(get_nth_most_common_value): Deal with variable number
of key-value pairs.
(dump_ic_profile): Use GCOV_TOPN_MAXIMUM_TRACKED_VALUES
for loop iteration.
(gimple_find_values_to_profile): Set GCOV_TOPN_MEM_COUNTERS
to n_counters.
* doc/gcov-dump.texi: Document new -r option.
libgcc/ChangeLog:
* libgcov-driver.c (prune_topn_counter): Remove.
(prune_counters): Likewise.
(merge_one_data): Special case TOP N counters
as they have variable length.
(write_top_counters): New.
(write_one_data): Special case TOP N.
(dump_one_gcov): Do not prune TOP N counters.
* libgcov-merge.c (merge_topn_values_set): Remove.
(__gcov_merge_topn): Use gcov_topn_add_value.
* libgcov-profiler.c (__gcov_topn_values_profiler_body):
Likewise here.
* libgcov.h (gcov_counter_add): New.
(gcov_counter_set_if_null): Likewise.
(gcov_topn_add_value): New.
Windows ABI (MinGW) is different than Linux ABI when bitfileds are involved.
The following patch adds __attribute__ ((gcc_struct)) to struct fenv in order
to match the layout of x87 state image in memory.
2020-06-01 Uroš Bizjak <ubizjak@gmail.com>
libatomic/ChangeLog:
* config/x86/fenv.c (struct fenv): Add __attribute__ ((gcc_struct)).
libgcc/ChangeLog:
* config/i386/sfp-exceptions.c (struct fenv):
Add __attribute__ ((gcc_struct)).
libgfortran/ChangeLog:
PR libfortran/95418
* config/fpu-387.h (struct fenv): Add __attribute__ ((gcc_struct)).
