return in ctors on targetm.cxx.cdtor_returns_this () target like arm
is emitted as GOTO_EXPR cdtor_label where at cdtor_label it emits
RETURN_EXPR with the this.
Similarly, in all dtors regardless of targetm.cxx.cdtor_returns_this ()
a return is emitted similarly.
potential_constant_expression_1 was rejecting these gotos and so we
incorrectly rejected these testcases, but actual cxx_eval* is apparently
handling these just fine. I was a little bit worried that for the
destruction of bases we wouldn't evaluate something we should, but as the
testcase shows, that is evaluated through try ... finally and there is
nothing after the cdtor_label. For arm there is RETURN_EXPR this; but we
don't really care about the return value from ctors and dtors during the
constexpr evaluation.
I must say I don't see much the point of cdtor_labels at all, I'd think
that with try ... finally around it for non-arm we could just RETURN_EXPR
instead of the GOTO_EXPR and the try/finally gimplification would DTRT,
and we could just add the right return value for the arm case.
2022-02-14 Jakub Jelinek <jakub@redhat.com>
PR c++/104513
* constexpr.cc (potential_constant_expression_1) <case GOTO_EXPR>:
Don't punt if returns (target).
* g++.dg/cpp1y/constexpr-104513.C: New test.
* g++.dg/cpp2a/constexpr-dtor12.C: New test.
Obviously it would be better if these reductions could be evaluated at compile
time, but this will avoid an ICE.
gcc/ChangeLog:
* config/gcn/gcn.cc (gcn_expand_reduc_scalar): Use force_reg.
When DSE removes a trivially dead def we have to reset niter information
on loops since that might refer to it. The patch also adds verification
to make sure this does not happen.
2022-02-14 Richard Biener <rguenther@suse.de>
PR tree-optimization/104528
* tree-ssa.h (find_released_ssa_name): Declare.
* tree-ssa.cc (find_released_ssa_name): Export.
* cfgloop.cc (verify_loop_structure): Look for released
SSA names in loops nb_iterations.
* tree-ssa-dse.cc (pass_dse::execute): Release number of iteration
estimates.
* gfortran.dg/pr104528.f: New testcase.
With the new value of __cpp_concepts required by P2493, we can test
whether the compiler supports conditionally trivial special members.
This allows us to remove the workaround that disables fully-constexpr
std::variant for Clang. Now it should work for non-GCC compilers (such
as future releases of Clang) that support conditionally trivial
destructors and define the new value of __cpp_concepts.
libstdc++-v3/ChangeLog:
PR libstdc++/103891
* include/bits/c++config (_GLIBCXX_HAVE_COND_TRIVIAL_SPECIAL_MEMBERS):
Remove.
* include/std/variant: Check feature test macros instead.
* include/std/version: Likewise.
The preprocessor check for _GLIBCXX_USE_FLOAT128 is the wrong condition,
because when the compiler is built with --with-long-double-format=ieee
configure determines that __float128 is the same as long double, and so
should not be used. But we do want the std::to_chars overloads for
__float128 in that case, because the floating_to_chars.cc file is built
with -mabi=ibmlongdouble and so the __float128 overloads are actually
the 'long double' ones for -mabi=ieeelongdouble code.
This fixes missing definitions of the __float128 overloads of
std::to_chars for --with-long-double-format=ieee builds. Without this,
there are symbols present in the --with-long-double-abi=ibm build which
are missing from the --with-long-double-abi=ieee build.
libstdc++-v3/ChangeLog:
* src/c++17/floating_to_chars.cc (FLOAT128_TO_CHARS): Depend on
LONG_DOUBLE_ALT128_COMPAT instead of USE_FLOAT128.
This avoids forwprop from matching DFP <-> FP vector conversions
using VEC_[UN]PACK{_TRUNC,_LO,_HI}. Maybe DFP vectors shouldn't be
a thing, but they appearantly are. Re-using CONVERT/NOP_EXPR for
DFP <-> FP conversions was probably a mistake.
2022-02-14 Richard Biener <rguenther@suse.de>
PR tree-optimization/104511
* tree-ssa-forwprop.cc (simplify_vector_constructor): Avoid
touching DFP <-> FP conversions.
* gcc.dg/pr104511.c: New testcase.
The following handles internal function calls similar to how the
C++ frontend does, avoiding ICEing on those.
2022-02-14 Richard Biener <rguenther@suse.de>
PR c/104505
gcc/c-family/
* c-pretty-print.cc (c_pretty_printer::postfix_expression): Handle
internal function calls.
gcc/testsuite/
* c-c++-common/pr104505.c: New testcase.
The following attempts to address gimplification of
... = VIEW_CONVERT_EXPR<int[4]>((i & 1) != 0 ? inv : src)[i];
which is problematic since gimplifying the base object
? inv : src produces a register temporary but GIMPLE does not
really support a register as a base for an ARRAY_REF (even
though that's not strictly validated it seems as can be seen
at -O0). Interestingly the C++ frontend avoids this issue
by emitting the following GENERIC instead:
... = (i & 1) != 0 ? VIEW_CONVERT_EXPR<int[4]>(inv)[i] : VIEW_CONVERT_EXPR<int[4]>(src)[i];
The proposed patch below fixes things up when using an rvalue
as the base is OK by emitting a copy from a register base to a
non-register one. The ?: as lvalue extension seems to be gone
for C, C++ again unwraps the COND_EXPR in that case.
2022-02-11 Richard Biener <rguenther@suse.de>
PR middle-end/104497
* gimplify.cc (gimplify_compound_lval): Make sure the
base is a non-register if needed and possible.
* c-c++-common/torture/pr104497.c: New testcase.
Use the Long Long Float wrapper in terms of Long Float for Alpha/Linux
targets as well, fixing gnatlib compilation errors:
a-nallfl.ads:48:13: warning: intrinsic binding type mismatch on result [enabledby default]
a-nallfl.ads:48:13: warning: intrinsic binding type mismatch on parameter 1 [enabled by default]
a-nallfl.ads:48:13: warning: profile of "Sin" doesn't match the builtin it binds [enabled by default]
etc. with the `alpha-linux-gnu' target.
gcc/ada/
PR ada/98724
PR ada/97504
* Makefile.rtl (LIBGNAT_TARGET_PAIRS) <alpha*-*-linux*>: Use
wraplf version of Aux_Long_Long_Float.
It turns out to be painful to require linking against -lrt on
GNU/Linux, as that makes it harder to link Go code into C programs.
Instead just call the timer syscalls directly. That is what the
upstream library does anyhow.
gcc/go/
* gospec.cc: Revert 2022-02-09 change:
(RTLIB, RT_LIBRARY): Don't define.
(lang_specific_driver): Don't add -lrt if linking statically
on GNU/Linux.
gotools/
* configure.ac: Revert 2022-02-09 change:
(RT_LIBS): Don't define.
* Makefile.am (check-runtime): Don't set GOLIBS to $(RT_LIBS).
* configure, Makefile.in: Regenerate.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/385475
PR104228 showed that character lengths were shared between associate
variable and associate targets. This is problematic when the associate
target is itself a variable and gets a variable to hold the length, as
the length variable is added (and all the variables following it in the chain)
to both the associate variable scope and the target variable scope.
This caused an ICE when compiling with -O0 -fsanitize=address.
This change forces the creation of a separate character length for the
associate variable. It also forces the initialization of the character
length variable to avoid regressing associate_32 and associate_47 tests.
PR fortran/104228
gcc/fortran/ChangeLog:
* resolve.cc (resolve_assoc_var): Also create a new character
length for non-dummy associate targets.
* trans-stmt.cc (trans_associate_var): Initialize character length
even if no temporary is used for the associate variable.
gcc/testsuite/ChangeLog:
* gfortran.dg/asan/associate_58.f90: New test.
* gfortran.dg/asan/associate_59.f90: New test.
The pattern converts (cond (cmp a b) (convert c) (convert d))
to (convert (cond (cmp a b) c d)) when
1) types_match (c, d)
2) single_use for (convert c) and (convert d)
3) TYPE_PRECISION (TREE_TYPE (c)) == TYPE_PRECISION (TREE_TYPE (a))
4) INTEGERAL_TYPE_P (TREE_TYPE (c))
The pattern can save packing of mask and data(partial for data, 2 vs
1).
gcc/ChangeLog:
PR target/103771
* match.pd (cond_expr_convert_p): New match.
* tree-vect-patterns.cc (gimple_cond_expr_convert_p): Declare.
(vect_recog_cond_expr_convert_pattern): New.
gcc/testsuite/ChangeLog:
* gcc.target/i386/pr103771-2.c: New test.
* gcc.target/i386/pr103771-3.c: New test.
With -fstack-check* __builtin_alloca* can throw and the asan
instrumentation of this builtin wasn't prepared for that case.
The following patch fixes that by replacing the builtin with the
replacement builtin and emitting any further insns on the fallthru
edge.
I haven't touched the hwasan code which most likely suffers from the
same problem.
2022-02-12 Jakub Jelinek <jakub@redhat.com>
PR sanitizer/104449
* asan.cc: Include tree-eh.h.
(handle_builtin_alloca): Handle the case when __builtin_alloca or
__builtin_alloca_with_align can throw.
* gcc.dg/asan/pr104449.c: New test.
* g++.dg/asan/pr104449.C: New test.
The following testcase ICEs, because AVX512F is enabled, AVX512VL is not,
and the cvtsd2ss insn has %xmm0-15 as output operand and %xmm16-31 as
input operand. For output operand %xmm16+ the splitter just gives up
in such case, but for such input it just emits vmovddup which requires
AVX512VL if either operand is EXT_REX_SSE_REG_P (when it is 128-bit).
The following patch fixes it by treating that case like the pre-SSE3
output != input case - move the input to output and do everything on
the output reg which is known to be < %xmm16.
2022-02-12 Jakub Jelinek <jakub@redhat.com>
PR target/104502
* config/i386/i386.md (cvtsd2ss splitter): If operands[1] is xmm16+
and AVX512VL isn't available, move operands[1] to operands[0] first.
* gcc.target/i386/pr104502.c: New test.
Two issues resulted in this PR, which manifests when we force a constant into
memory in LRA (in PIC code on Darwin). The presence of such forced constants
is quite dependent on other RTL optimisations, and it is easy for the issue to
become latent for a specific case.
First, in the Darwin-specific rs6000 backend code, we were not being careful
enough in rejecting invalid symbolic addresses. Specifically, when generating
PIC code, we require a SYMBOL_REF to be wrapped in an UNSPEC_MACHOPIC_OFFSET.
Second, LRA was attempting to load a register using an invalid lo_sum address.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
Co-authored-by: Vladimir Makarov <vmakarov@redhat.com>
PR target/104117
gcc/ChangeLog:
* config/rs6000/rs6000.cc (darwin_rs6000_legitimate_lo_sum_const_p):
Check for UNSPEC_MACHOPIC_OFFSET wrappers on symbolic addresses when
emitting PIC code.
(legitimate_lo_sum_address_p): Likewise.
* lra-constraints.cc (process_address_1): Do not attempt to emit a reg
load from an invalid lo_sum address.
The logic in libcpp/Makefile.in listing diagnostic functions in a call
to xgettext was missing cpp_warning_at, cpp_pedwarning_at and
cpp_error_at, so resulting in some messages not being extracted for
translation; add those functions to those for which messages are
extracted.
Tested with "make cpplib.pot".
* Makefile.in (po/$(PACKAGE).pot): Also handle cpp_warning_at,
cpp_pedwarning_at and cpp_error_at.
The move of source files to .cc names broke most message extraction by
exgettext because it processed .c files with --language=GCC-source but
didn't process .cc files that way. Fix to process files identified as
C++ that way as well.
Tested with "make gcc.pot".
* exgettext: Also process C++ sources with --language=GCC-source.
The std::get_temporary_buffer function is deprecated since C++17, but
the test was expecting a warning for C++14 as well.
libstdc++-v3/ChangeLog:
* testsuite/20_util/temporary_buffer.cc: Fix dg-warning target
selector.
The following testcase ICEs on x86_64-linux, because match.pd emits
there a NOP_EXPR cast from int*8 vector type with BLKmode to
unsigned*8 vector type with BLKmode and vec-lowering isn't prepared
to handle such casts.
Fixed by using VIEW_CONVERT_EXPR instead.
2022-02-11 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/104499
* match.pd ((X & Y) CMP 0 -> X CMP2 ~Y): Use view_convert instead
of convert.
* gcc.c-torture/compile/pr104499.c: New test.
When looking at __builtin_clear_padding today, I've noticed that
it is quite wasteful to extend the original user one argument to 3,
2 is enough. We need to encode the original type of the first argument
because pointer conversions are useless in GIMPLE, and we need to record
a boolean whether it is for -ftrivial-auto-var-init=* or not.
But for recording the type we don't need the value (we've always used
zero) and for recording the boolean we don't need the type (we've always
used integer_type_node).
So, this patch merges the two into one.
2022-02-11 Jakub Jelinek <jakub@redhat.com>
* tree.cc (build_common_builtin_nodes): Fix up formatting in
__builtin_clear_padding decl creation.
* gimplify.cc (gimple_add_padding_init_for_auto_var): Encode
for_auto_init in the value of 2nd BUILT_IN_CLEAR_PADDING
argument rather than in 3rd argument.
(gimplify_call_expr): Likewise. Fix up comment formatting.
* gimple-fold.cc (gimple_fold_builtin_clear_padding): Expect
2 arguments instead of 3, take for_auto_init from the value
of 2nd argument.
v850 target has an interesting insn alternative constraint 'e!r' where e
denotes even general regs and e is a subset of r. We cannot just make
union of exclude start hard registers for e and r and should use only
exclude start hard registers of r. The following patch implements this.
gcc/ChangeLog:
PR rtl-optimization/104400
* lra-constraints.cc (process_alt_operands): Don't make union of
this_alternative_exclude_start_hard_regs when reg class in insn
alternative covers other reg classes in the same alternative.
gcc/testsuite/ChangeLog:
PR rtl-optimization/104400
* gcc.target/v850/pr104400.c: New.
* gcc.target/v850/v850.exp: New.
PR analyzer/104274 reports a false positive from
-Wanalyzer-use-of-uninitialized-value on hppa when passing
an empty struct as a function parameter.
pa_pass_by_reference returns true for empty structs, so the
call is turned into:
struct empty arg.0;
arg.0 = arg
called_function (arg.0);
by gimplify_parameters.
However, gimplify_modify_expr discards assignments statments
of empty types, so that we end up with:
struct empty arg.0;
called_function (arg.0);
which the analyzer considers to be a use of uninitialized "arg.0";
Given that gimplify_modify_expr will discard any assignments to
such types, it seems simplest for -Wanalyzer-use-of-uninitialized-value
to ignore values of empty types.
gcc/analyzer/ChangeLog:
PR analyzer/104274
* region-model.cc (region_model::check_for_poison): Ignore
uninitialized uses of empty types.
gcc/testsuite/ChangeLog:
PR analyzer/104274
* gcc.dg/analyzer/torture/empty-struct-1.c: New test.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
The following adds __attribute__((vector_mask)) to get access to
the corresponding mask type for a vector type. The implementation
simply uses truth_type_for so creating a mask type that's not
what the target would choose as canonical, say a AVX2 style one
when AVX512VL is enabled, is not possible. It might be possible
to provide access to that with an optional argument specifying
the precision of the bool element. The syntax is as simple as
typedef vector_type mask_type __attribute__((vector_mask));
In theory this allows to create unit testcases for vector
lowering and ISEL.
2022-02-11 Richard Biener <rguenther@suse.de>
gcc/c-family/
* c-attribs.cc (c_common_attribute_table): Add entry for
vector_mask.
(handle_vector_mask_attribute): New.
gcc/c/
* gimple-parser.cc (c_parser_gimple_statement): Properly parse
VEC_COND_EXPRs.
gcc/testsuite/
* gcc.dg/gimplefe-48.c: New testcase.
The following testcase ICEs, because due to the -frounding-math
fold_const_call fails, which is it returns NULL, and returning NULL from
cxx_eval* is wrong, all the callers rely on them to either return folded
value or original with *non_constant_p = true.
The following patch does that, and additionally falls through into the
default case where there is diagnostics for the !ctx->quiet case too.
2022-02-11 Jakub Jelinek <jakub@redhat.com>
PR c++/104472
* constexpr.cc (cxx_eval_internal_function) <case IFN_VEC_CONVERT>:
Only return fold_const_call result if it is non-NULL. Otherwise
fall through into the default: case to return t, set *non_constant_p
and emit diagnostics if needed.
* g++.dg/cpp0x/constexpr-104472.C: New test.
The following testcase ICEs, because combine substitutes
(insn 10 9 11 2 (set (reg/v:SI 7 sp [ a ])
(const_int 0 [0])) "pr104446.c":9:5 81 {*movsi_internal}
(nil))
(insn 13 11 14 2 (set (mem/f:SI (pre_dec:SI (reg/f:SI 7 sp)) [0 S4 A32])
(reg:SI 85)) "pr104446.c":10:3 56 {*pushsi2}
(expr_list:REG_DEAD (reg:SI 85)
(expr_list:REG_ARGS_SIZE (const_int 16 [0x10])
(nil))))
forming
(insn 13 11 14 2 (set (mem/f:SI (pre_dec:SI (const_int 0 [0])) [0 S4 A32])
(reg:SI 85)) "pr104446.c":10:3 56 {*pushsi2}
(expr_list:REG_DEAD (reg:SI 85)
(expr_list:REG_ARGS_SIZE (const_int 16 [0x10])
(nil))))
which is invalid RTL (pre_dec's argument must be a REG).
I know substitution creates various forms of invalid RTL and hopes that
invalid RTL just won't recog.
But unfortunately in this case we ICE before we get to recog, as
try_combine does:
if (n_auto_inc)
{
int new_n_auto_inc = 0;
for_each_inc_dec (newpat, count_auto_inc, &new_n_auto_inc);
if (n_auto_inc != new_n_auto_inc)
{
if (dump_file && (dump_flags & TDF_DETAILS))
fprintf (dump_file, "Number of auto_inc expressions changed\n");
undo_all ();
return 0;
}
}
and for_each_inc_dec under the hood will do e.g. for the PRE_DEC case:
case PRE_DEC:
case POST_DEC:
{
poly_int64 size = GET_MODE_SIZE (GET_MODE (mem));
rtx r1 = XEXP (x, 0);
rtx c = gen_int_mode (-size, GET_MODE (r1));
return fn (mem, x, r1, r1, c, data);
}
and that code rightfully expects that the PRE_DEC operand has non-VOIDmode
(as it needs to be a REG) - gen_int_mode for VOIDmode results in ICE.
I think it is better not to emit the clearly invalid RTL during substitution
like we do for other cases, than to adding workarounds for invalid IL
created by combine to rtlanal.cc and perhaps elsewhere.
As for the testcase, of course it is UB at runtime to modify sp that way,
but if such code is never reached, we must compile it, not to ICE on it.
And I don't see why on other targets which use the autoinc rtxes much more
it couldn't happen with other registers.
2022-02-11 Jakub Jelinek <jakub@redhat.com>
PR middle-end/104446
* combine.cc (subst): Don't substitute CONST_INTs into RTX_AUTOINC
operands.
* gcc.target/i386/pr104446.c: New test.
This fixes vectorized_internal_fn_supported_p behavior when
facing vector types with an integer mode.
2022-02-11 Richard Biener <rguenther@suse.de>
PR middle-end/104496
* internal-fn.cc (vectorized_internal_fn_supported_p):
Bail out for integer mode vector types.
* gcc.target/i386/pr104496.c: New testcase.
As mentioned in the PR, we get -fcompare-debug failure, which is caused by
cfg_layout_merge_blocks successfully merging two bbs where both bbs
contained just CODE_LABEL, NOTE_INSN_BASIC_BLOCK and in the -g case both
some debug insns at the end. cfg_layout_merge_blocks calls
update_bb_for_insn_chain which for the post-label insns in the second block
(except for BARRIERs) calls df_insn_change_bb. This function changes
the bb of the insns and for notes just punts, but for other insns calls
df_set_bb_dirty. Now the problem is that because there were only debug
insns and notes in the second block, df_set_bb_dirty is called on both
only in the -g case and not with -g0. df_set_bb_dirty these days
sets both the BB_MODIFIED flag and marks the bb as dirty, and the former
is what 6 spots in cfgcleanup.cc use in code-generation decisions,
in this case
may_thread |= (target->flags & BB_MODIFIED) != 0;
in particular. So, with -g may_thread is true while with -g0 it is not
and we diverge from that point onwards.
I've thought about introducing df_set_bb_dirty_nondebug that wouldn't
set BB_MODIFIED but would mark the bb dirty, but then I went through
history and found changes like:
https://gcc.gnu.org/legacy-ml/gcc-patches/2010-10/msg00059.html
so I've also tried just not calling df_set_bb_dirty for debug insns
at all and it passed x86_64-linux and i686-linux
--enable-checking=yes,rtl,extra,df bootstraps/regtests, so perhaps
that works too.
Now that I look at it again, if we don't need those from %d to %d messages
for debug insns in the dump files, another way to fix it would be just to
change the very first line in the hunk from
if (!INSN_P (insn))
to
if (!DEBUG_INSN_P (insn))
Though, df_set_bb_dirty_nondebug which will do everything but
set bb->flags |= BB_MODIFIED is yet another option I can test.
Perhaps even that PR42889 was solely about those 6 decisions in cfgcleanup
(at that point it used df_get_bb_dirty) and not about actually the
recomputation of some of the problems causing different code generations.
2022-02-11 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/104459
* df-scan.cc (df_insn_change_bb): Don't call df_set_bb_dirty when
moving DEBUG_INSNs between bbs.
* gcc.dg/pr104459.c: New test.
Require effective target non_strict_prototype in a few test-cases.
Tested on nvptx.
gcc/testsuite/ChangeLog:
2022-02-10 Tom de Vries <tdevries@suse.de>
* gcc.c-torture/compile/pr100576.c: Require effective target
non_strict_prototype.
* gcc.c-torture/compile/pr97576.c: Same.
With GOMP_NVPTX_JIT=-00 and -mptx=3.1, I run into:
...
FAIL: libgomp.oacc-c/../libgomp.oacc-c-c++-common/acc_prof-version-1.c \
-DACC_DEVICE_TYPE_nvidia=1 -DACC_MEM_SHARED=0 -foffload=nvptx-none -O2 \
execution test
...
The problem is that we're generating a diverging branch around nothing:
...
{
.reg.u32 %x;
mov.u32 %x, %tid.x;
setp.ne.u32 %r23, %x, 0;
}
@%r23 bra $L2;
$L2:
...
which the driver JIT has problems with at -O0, so consequently we run into the
nvptx_uniform_warp_check.
Fix this by handling asm ("") and alike in prevent_branch_around_nothing.
Tested on x86_64 with nvptx accelerator.
gcc/ChangeLog:
2022-02-10 Tom de Vries <tdevries@suse.de>
PR target/104456
* config/nvptx/nvptx.cc (prevent_branch_around_nothing): Handle asm
insn.
The testcase FAILs whenever size_t is not unsigned long:
FAIL: g++.dg/warn/Wuninitialized-32.C -std=c++98 (test for excess errors)
Excess errors:
.../gcc/testsuite/g++.dg/warn/Wuninitialized-32.C:4:7: error: 'operator new' takes type 'size_t' ('unsigned int') as first parameter [-fpermissive]
Fixed by using __SIZE_TYPE__ instead of unsigned long.
2022-02-11 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/104373
* g++.dg/warn/Wuninitialized-32.C (operator new[]): Use __SIZE_TYPE__
as type of the first argument instead of unsigned long.
This test regressed after my PR103752 patch with -march=cascadelake. I
don't understand why that flag makes a difference, but this patch is correct
in any case.
gcc/cp/ChangeLog:
* module.cc (depset:#️⃣:add_specializations): Use
STRIP_TEMPLATE.
This changes the memory order used in the spin wait code to match
that of libc++.
libstdc++-v3/ChangeLog:
* include/bits/atomic_wait.h (__waiter_base::_S_do_spin,
__waiter_base::_S_do_spin_v): Change memory order from relaxed
to acquire.
PR c++/102204
gcc/cp/ChangeLog:
* decl2.cc (cp_omp_mappable_type_1): Remove check for virtual
members as those are permitted since OpenMP 5.0.
libgomp/ChangeLog:
* testsuite/libgomp.c++/target-virtual-1.C: New test.
gcc/testsuite/ChangeLog:
* g++.dg/gomp/unmappable-1.C: Remove previously expected dg-message.
gcc/analyzer/ChangeLog:
PR analyzer/98797
* region-model-manager.cc
(region_model_manager::maybe_fold_sub_svalue): Generalize getting
individual chars of a STRING_CST from element_region to any
subregion which is a concrete access of a single byte from its
parent region.
* region.cc (region::get_relative_concrete_byte_range): New.
* region.h (region::get_relative_concrete_byte_range): New decl.
gcc/testsuite/ChangeLog:
PR analyzer/98797
* gcc.dg/analyzer/casts-1.c: Mark xfails as fixed; add further
test coverage for casts of string literals.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
In the pass_zero_call_used_regs, when updating dataflow info after adding
the register zeroing sequence in the epilogue of the function, we should
call "df_update_exit_block_uses" to update the register use information in
the exit block to include all the registers that have been zeroed.
2022-02-10 Qing Zhao <qing.zhao@oracle.com>
gcc/ChangeLog:
PR middle-end/100775
* function.cc (gen_call_used_regs_seq): Call
df_update_exit_block_uses when updating df.
gcc/testsuite/ChangeLog:
PR middle-end/100775
* gcc.target/arm/pr100775.c: New test.
