2006-05-20 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Andreas Tobler <a.tobler@schweiz.ch>
* configure.in: Enable libgcj for hppa*-hp-hpux11*.
* configure: Rebuilt.
Co-Authored-By: Andreas Tobler <a.tobler@schweiz.ch>
From-SVN: r113938
* configure.in (m32c): Build libstdc++-v3. Pass flags to
reference libgloss so that libssp can be built in a combined
tree.
* configure: Regenerate.
From-SVN: r113066
2006-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/25670
* Makefile.tpl ([+compare-target+]): Print explanation messages.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* Makefile.in: Regenerate.
* configure: Regenerate.
gcc:
2006-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/25476
* Makefile.in (LDFLAGS): Define from autoconf substitution.
* Makefile.in (BOOTSTRAPPING): New.
(quickstrap): New definition if BOOTSTRAPPING=yes.
* Makefile.in (CONFIG_LANGUAGES): Substitute all_selected_languages.
* configure.ac: Substitute all_selected_languages with the languages
that were configured. For all the other variables except
lang_specs_files, include all the languages in the tree.
* configure: Regenerate.
* Makefile.in (stmp-fixinc): Copy includes from the prev-gcc directory,
if there is one. Run the commands to run fixincludes in the same
subshell.
* doc/makefile.texi: Document new makefile targets from toplevel bootstrap.
* doc/install.texi: Document exact conventions for searching target tools.
Document --with-build-time-tools. Document toplevel bootstrap. Document
something more about building an Ada cross-compiler. Don't list GNU Make
requirements which affect all platforms.
From-SVN: r111295
2006-02-14 Paolo Bonzini <bonzini@gnu.org>
Sync from src:
2005-12-27 Leif Ekblad <leif@rdos.net>
* configure.in: Add support for RDOS target.
* configure: Regenerate.
2006-02-14 Paolo Bonzini <bonzini@gnu.org>
Andreas Schwab <schwab@suse.de>
* configure: Regenerate.
config:
2006-02-14 Paolo Bonzini <bonzini@gnu.org>
Andreas Schwab <schwab@suse.de>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Use correct program name.
(ACX_CHECK_INSTALLED_TARGET_TOOL): Likewise, and always set $1.
Co-Authored-By: Andreas Schwab <schwab@suse.de>
From-SVN: r110961
2006-01-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Set with_gnu_as, with_gnu_ld, with_newlib earlier.
Set md_exec_prefix. Use ACX_CHECK_INSTALLED_TARGET_TOOL to find
the assembler, linker and binutils.
* configure: Regenerate.
2006-01-26 Paolo Bonzini <bonzini@gnu.org>
* config/acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Test
$with_build_time_tools.
(ACX_PATH_SEP): New.
(ACX_TOOL_DIRS): Move here from the gcc directory.
(ACX_CHECK_INSTALLED_TARGET_TOOL): New.
(GCC_TARGET_TOOL): Do not use a host tool if we found a target tool
with a complete path in either $with_build_time_tools or $exec_prefix.
2006-01-26 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Expect target tools paths to be passed from the toplevel
and wrap the detection into AS_SET_VAR_IF. Extract side-effects out of
AS_SET_VAR_IF.
* acinclude.m4 (gcc_AC_TOOL_DIRS, gcc_AC_CHECK_TOOL): Remove.
From-SVN: r110266
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
From-SVN: r109325
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
From-SVN: r108856
toplevel:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
From-SVN: r108059
/
* configure.in (arm-*-linux-gnueabi): Add to noconfigdirs
target-libffi, target-qthreads, target-libjava, and
targetlibobjc.
* configure: Regenerate.
gcc/
Merge from csl-arm-branch:
2005-09-07 Paul Brook <paul@codesourcery.com>
* config/arm/linux-eabi.h (SUBTARGET_EXTRA_LINK_SPEC): Prepend a
space to string.
2005-04-30 Paul Brook <paul@codesourcery.com>
* config/arm/bpabi.h (TARGET_DEFAULT): Define.
* config/arm/linux-eabi.h (SUBTARGET_CPU_DEFAULT): Define.
2005-03-07 Daniel Jacobowitz <dan@codesourcery.com>
* config/arm/arm.c (arm_all_abis): Add aapcs-linux.
(arm_override_options): Use TARGET_AAPCS_BASED.
* config/arm/arm.h (enum arm_abi_type): Add ARM_ABI_AAPCS_LINUX.
(PTRDIFF_TYPE): Use int for AAPCS.
(DEFAULT_SHORT_ENUMS): Use false for aapcs-linux.
* config/arm/linux-eabi.h (ARM_DEFAULT_ABI, WCHAR_TYPE): Define.
(DEFAULT_SHORT_ENUMS): Delete.
* doc/invoke.texi (ARM Options): Document -mabi=aapcs-linux.
2004-12-15 Daniel Jacobowitz <dan@codesourcery.com>
* config/arm/arm.h (DEFAULT_SHORT_ENUMS): Wrap in #ifndef.
* config/arm/linux-eabi.h (DEFAULT_SHORT_ENUMS): Define to 0.
* config/arm/t-linux-eabi (TARGET_LIBGCC2_CFLAGS): Set to -fPIC.
2004-12-03 Mark Mitchell <mark@codesourcery.com>
* config/arm/linux-eabi.h (LIBGCC_SPEC): Do not define.
2004-11-22 Mark Mitchell <mark@codesourcery.com>
* config.gcc (arm*-*-linux-gnueabi): Use __cxa_atexit.
2004-11-19 Mark Mitchell <mark@codesourcery.com>
* config.gcc (arm*-*-linux-gnueabi): Add it.
* config/arm/bpabi.h (FPUTYPE_DEFAULT): Undefine it before
redefining it.
(TARGET_OS_CPP_BUILTINS): Likeiwse.
* config/arm/linux-eabi.h: New file.
* config/arm/linux-elf.h (LINUX_TARGET_INTERPRETER): New macro.
(LINUX_TARET_LINK_SPEC): Likewise.
(LINK_SPEC): Use it.
* config/arm/t-linux-eabi: New file.
libcpp/
* configure.ac: Require 64-bit int for arm*-*-*eabi*.
* configure: Regenerate.
libstdc++/
Merge from csl-arm-branch:
2004-12-15 Daniel Jacobowitz <dan@codesourcery.com>
* libstdc++-v3/config/linker-map.gnu: Add ARM EABI symbols.
From-SVN: r105121
2005-10-05 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/22340
* configure.in (default_target): Remove.
* Makefile.tpl (all): Do not use prerequisites as subroutines
(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
use prerequisites as subroutines.
(check-host, check-target): New.
(bootstrap configure & all targets): Do not use stage*-start
if the directory layout is already ok.
(non-bootstrap configure & all targets): Prepend a $(unstage).
(stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL.
(NOTPARALLEL): Remove.
(unstage, stage variables): New variables.
(unstage, stage targets): Simply expand to those variables.
* configure: Regenerate.
* Makefile.in: Regenerate.
From-SVN: r104978
* configure.in: Recognize f95 in the --enable-languages option,
and substitute it for fortran, issuing a warning.
* configure: Regenerate.
* Make-lang.in: Change targets prefixes from f95 to fortran.
* config-lang.in: Change language name to "fortran".
* lang.opt: Change language name to "fortran".
* options.c: Change CL_F95 to CL_Fortran.
From-SVN: r104215
toplevel:
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Replace NCN_STRICT_CHECK_TOOL with
NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
Look for alternate names of the target cc and c++
* configure: Regenerate.
config:
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL,
NCN_STRICT_CHECK_TARGET_TOOL): Remove.
(NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
based on the deleted macros.
From-SVN: r103036
* doc/install.texi (--with-build-sysroot): Fix grammatical error.
Clarify use of "build" in name.
* Makefile.tpl (SYSROOT_CFLAGS_FOR_TARGET): New variable.
(CFLAGS_FOR_TARGET): Use it.
(CXXFLAGS_FOR_TARGET): Likewise.
* Makefile.in: Regenerated.
* configure.in (--with-build-sysroot): New option.
* configure: Regenerated.
From-SVN: r102389
* configure.in (unsupported_languages): New macro.
<mmix-knuth-mmixware>: Set unsupported_languages. Name explicit
non-ported target libraries in noconfigdirs.
<cris-*, crisv32-*> Ditto, except for non-aout, non-elf,
non-linux-gnu. Remove libgcj_ex_libffi.
<lang_frag loop>: Set add_this_lang=no if the language is in
unsupported_languages.
* configure: Regenerate.
From-SVN: r100680
* configure.in: Set noconfigdirs for ms1.
* configure: Regenerate.
Co-Authored-By: Michael Snyder <msnyder@redhat.com>
Co-Authored-By: Stan Cox <scox@redhat.com>
From-SVN: r100509
* configure.in <crisv32-*-*, cris-*-*>: New local variable
libgcj_ex_libffi. Have specific match for *-*-linux*. Separate
matches for "*-*-aout" and "*-*-elf". Don't disable libffi for
"*-*-elf" and "*-*-linux*".
* configure: Regenerate.
From-SVN: r98357
