* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
2017-11-05 Tom de Vries <tom@codesourcery.com>
PR other/82784
* printf/gmp-impl.h (MPN_MUL_N_RECURSE): Remove semicolon after
"do {} while (0)".
From-SVN: r254420
2017-09-01 Michael Meissner <meissner@linux.vnet.ibm.com>
PR libquadmath/81848
* configure.ac (powerpc*-linux*): Use attribute mode KC to create
complex __float128 on PowerPC instead of attribute mode TC.
* quadmath.h (__complex128): Likewise.
* configure: Regenerate.
* math/cbrtq.c (CBRT2): Use __float128 not long double.
(CBRT4): Likewise.
(CBRT2I): Likewise.
(CBRT4I): Likewise.
* math/j0q.c (U0): Likewise.
* math/sqrtq.c (sqrtq): Don't depend on implicit conversion
between __float128, instead explicitly convert the __float128
value to long double because the PowerPC does not allow __float128
and long double in the same expression.
From-SVN: r251613
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
2012-11-23 Tobias Burnus <burnus@net-b.de>
Joseph Myers <joseph@codesourcery.com>
* quadmath-rounding-mode.h: New.
* printf/fpioconst.c: Update from GLIBC. Fix strtod rounding.
* printf/fpioconst.h: Ditto.
* printf/printf_fp.c (__quadmath_printf_fp): Update from GLIBC.
Make printf respect the rounding mode for decimal output.
* printf/printf_fphex.c (__quadmath_printf_fphex): Update from
GLIBC. Make printf respect the rounding mode for hex output.
* strtod/strtod_l.c: Update from GLIBC. Make strtod respect the
rounding mode. Fix strtod handling of underflow.
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
From-SVN: r193770
2012-11-22 David S. Miller <davem@davemloft.net>
Tobias Burnus <burnus@net-b.de>
Joseph Myers <joseph@codesourcery.com>
* math/atanq.c (atanq): Update from GLIBC. Handle tiny and
very large arguments properly.
* math/j0q.c (y0q): Update from GLIBC. Avoid arithmetic
underflow when 'x' is very small.
* math/j1q.c (y1q): Ditto.
* math/log1pq.c (log1pq): Update from GLIBC. Saturate
nonzero exponents with absolute value below 0x1p-128 to
+/- 0x1p-128.
* math/powq.c (powq): Update from GLIBC. If xm1 is
smaller than LDBL_EPSILON/2.0L, just return xm1.
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
Co-Authored-By: Tobias Burnus <burnus@net-b.de>
From-SVN: r193716
2012-11-21 Tobias Burnus <burnus@net-b.de>
PR libquadmath/55225
* math/lgammaq.c (lgammaq): Use local variable if
math.h does not provide signgam.
* acinclude.m4 (LIBQUAD_CHECK_MATH_H_SIGNGAM): New check.
* configure.ac: Use it.
* configure: Regenerate.
* config.h.in: Regenerate.
From-SVN: r193695
2012-11-15 Tobias Burnus <burnus@net-b.de>
Joseph Myers <joseph@codesourcery.com>
* math/fmaq.c (fmaq): Merge from GLIBC. Fix fma
underflows with small x * y; Fix overflow results
outside round-to-nearest mode; make use of Dekker
and Knuth algorithms use round-to-nearest.
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
From-SVN: r193538
2012-11-01 Tobias Burnus <burnus@net-b.de>
Joseph Myers <joseph@codesourcery.com>
* math/fmaq.c (fmaq): Merge from GLIBC. Handle cases
with small x * y using scaling, not as x * y + z.
* math/lgammaq.c (lgammaq): Fix signgam handling.
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
From-SVN: r193099
2012-10-31 Tobias Burnus <burnus@net-b.de>
Joseph Myers <joseph@codesourcery.com>
David S. Miller <davem@davemloft.net>
Ulrich Drepper <drepper@redhat.com>
Marek Polacek <polacek@redhat.com>:
Petr Baudis <pasky@suse.cz>
* math/complex.c (csqrtq): NaN and INF fixes.
* math/sqrtq.c (sqrt): NaN, INF and < 0 fixes.
* math/expm1q.c (expm1q): Changes from GLIBC. Use expq for
large parameters. Fix errno for boundary conditions.
* math/finiteq.c (finiteq): Add comment.
* math/fmaq.c (fmaq): Changes from GLIBC. Fix missing underflows
and bad results for some subnormal results. Fix sign of inexact
zero return. Fix sign of exact zero return.
Ensure additions are not scheduled after fetestexcept.
* math/jnq.c (jnq): Changes from GLIBC. Set up errno properly
for ynq. Fix jnq precision.
* math/nearbyintq.c (nearbyintq): Changes from GLIBC. Do not
manipulate bits before adding and subtracting TWO112[sx].
* math/rintq.c (rintq): Ditto.
* math/scalbnq.c (scalbnq): Changes from GLIBC. Fix integer
overflow.
Co-Authored-By: David S. Miller <davem@davemloft.net>
Co-Authored-By: Joseph Myers <joseph@codesourcery.com>
Co-Authored-By: Ulrich Drepper <drepper@redhat.com>
From-SVN: r193037
