For some targets (in my case VxWorks 5.5), libgcov does not compile due
to missing functions and macros such as getpid() and F_OK.
Incidentally, gcc/Makefile.in already contains comments such as
# Install gcov if it was compiled.
but there is no logic in place to actually allow gcov to not be
compiled.
So add an option for disabling build and install of libgcov and the
related host tools.
From-SVN: r262180
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
PR debug/83917
* configure.ac (AS_HIDDEN_DIRECTIVE): AC_DEFINE_UNQUOTED this to
$asm_hidden_op if visibility ("hidden") attribute works.
(HAVE_AS_CFI_SECTIONS): New AC_DEFINE.
* config/i386/i386-asm.h: Don't include auto-host.h.
(PACKAGE_VERSION, PACKAGE_NAME, PACKAGE_STRING, PACKAGE_TARNAME,
PACKAGE_URL): Don't undefine.
(USE_GAS_CFI_DIRECTIVES): Don't use nor define this macro, instead
guard cfi_startproc only on ifdef __GCC_HAVE_DWARF2_CFI_ASM.
(FN_HIDDEN): Change guard from #ifdef HAVE_GAS_HIDDEN to
#ifdef AS_HIDDEN_DIRECTIVE, use AS_HIDDEN_DIRECTIVE macro in the
definition instead of hardcoded .hidden.
* config/i386/cygwin.S: Include i386-asm.h first before .cfi_sections
directive. Use #ifdef HAVE_AS_CFI_SECTIONS rather than
#ifdef HAVE_GAS_CFI_SECTIONS_DIRECTIVE to guard .cfi_sections.
(USE_GAS_CFI_DIRECTIVES): Don't define.
* configure: Regenerated.
* config.in: Likewise.
From-SVN: r258057
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Enable building libgcc with CET options by default on Linux/x86 if
binutils supports CET v2.0. It can be disabled with --disable-cet.
It is an error to configure GCC with --enable-cet if bintuiils
doesn't support CET v2.0.
ENDBR instruction is added to __morestack_large_model since it is
called indirectly.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
config/
* cet.m4: New file.
gcc/
* config.gcc (extra_headers): Add cet.h for x86 targets.
* config/i386/cet.h: New file.
* doc/install.texi: Add --enable-cet/--disable-cet.
libgcc/
* Makefile.in (configure_deps): Add $(srcdir)/../config/cet.m4.
(CET_FLAGS): New.
* config/i386/morestack.S: Include <cet.h>.
(__morestack_large_model): Add _CET_ENDBR at function entrance.
* config/i386/resms64.h: Include <cet.h>.
* config/i386/resms64f.h: Likewise.
* config/i386/resms64fx.h: Likewise.
* config/i386/resms64x.h: Likewise.
* config/i386/savms64.h: Likewise.
* config/i386/savms64f.h: Likewise.
* config/i386/t-linux (HOST_LIBGCC2_CFLAGS): Add $(CET_FLAGS).
(CRTSTUFF_T_CFLAGS): Likewise.
* configure.ac: Include ../config/cet.m4.
Set and substitute CET_FLAGS.
* configure: Regenerated.
From-SVN: r254868
[gcc]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): If GLIBC
provides the hardware capability bits, define the macro
__BUILTIN_CPU_SUPPORTS__.
* config/rs6000/rs6000.c (cpu_expand_builtin): Generate a warning
if GLIBC does not provide the hardware capability bits. Add a
gcc_unreachable call if the built-in cpu function is neither
__builtin_cpu_is nor __builtin_cpu_supports.
(rs6000_get_function_versions_dispatcher): Change the warning
that an old GLIBC is used which does not export the capability
bits to be an error.
* doc/extend.texi (target_clones attribute): Document the
restriction that GLIBC 2.23 or newer is needed on the PowerPC.
(PowerPC built-in functions): Document that GLIBC 2.23 or newer is
needed by __builtin_cpu_is and __builtin_cpu_supports. Document
the macros defined by GCC if the newer GLIBC is available.
[gcc/testsuite]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* gcc.target/powerpc/bmi-andn-1.c: Add guard against using
__builtin_cpu_supports with old GLIBC's.
* gcc.target/powerpc/bmi-andn-2.c: Likewise.
* gcc.target/powerpc/bmi-bextr-1.c: Likewise.
* gcc.target/powerpc/bmi-bextr-2.c: Likewise.
* gcc.target/powerpc/bmi-bextr-4.c: Likewise.
* gcc.target/powerpc/bmi-bextr-5.c: Likewise.
* gcc.target/powerpc/bmi-blsi-1.c: Likewise.
* gcc.target/powerpc/bmi-blsi-2.c: Likewise.
* gcc.target/powerpc/bmi-blsmsk-1.c: Likewise.
* gcc.target/powerpc/bmi-blsmsk-2.c: Likewise.
* gcc.target/powerpc/bmi-blsr-1.c: Likewise.
* gcc.target/powerpc/bmi-blsr-2.c: Likewise.
* gcc.target/powerpc/bmi-tzcnt-1.c: Likewise.
* gcc.target/powerpc/bmi-tzcnt-2.c: Likewise.
* gcc.target/powerpc/bmi2-bzhi32-1.c: Likewise.
* gcc.target/powerpc/bmi2-bzhi64-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx32-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx32-2.c: Likewise.
* gcc.target/powerpc/bmi2-mulx64-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx64-2.c: Likewise.
* gcc.target/powerpc/bmi2-pdep32-1.c: Likewise.
* gcc.target/powerpc/bmi2-pdep64-1.c: Likewise.
* gcc.target/powerpc/bmi2-pext32-1.c: Likewise.
* gcc.target/powerpc/bmi2-pext64-1.c: Likewise.
* gcc.target/powerpc/cpu-builtin-1.c: Likewise.
[libgcc]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* configure.ac (PowerPC float128 hardware support): Test whether
we can use __builtin_cpu_supports before enabling the ifunc
handler.
* configure: Regenerate.
From-SVN: r250165
2017-06-21 Richard Biener <rguenther@suse.de>
PR gcov-profile/81080
* configure.ac: Add AC_SYS_LARGEFILE.
* libgcov.h: Include auto-target.h before tsystem.h to pick
up _FILE_OFFSET_BITS which might differ for multilibs.
* config.in: Regenerate.
* configure: Likewise.
From-SVN: r249435
This fixes float128 on BE and on 32-bit.
The configure tests need to use -mabi=altivec for 32-bit, since it is
not the default there. That also enables the "vector" keyword, used by
the tests. To do this it temporarily adds a few flags to the CFLAGS
variable.
It also fixes a syntax error in the libgcc_cv_powerpc_float128_hw test
(the function name was missing in the function declaration).
Regenerating config.in (via autoreconf) removed the duplicate definition
of HAVE_SOLARIS_CRTS.
Finally, this adds a "-mfloat128-hardware requires -m64" test to
rs6000.c: all the current patterns need 64-bit registers. Maybe we'll
want to add float128 hardware support to 32-bit some day, but certainly
not today.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Disallow
-mfloat128-hardware without -m64.
libgcc/
* configure.ac (test for libgcc_cv_powerpc_float128): Temporarily
modify CFLAGS. Add -mabi=altivec -mvsx -mfloat128.
(test for libgcc_cv_powerpc_float128_hw): Add -mpower9-vector and
-mfloat128-hardware to the CFLAGS. Fix syntax error in the C snippet.
* configure: Regenerate.
* config.in: Regenerate.
From-SVN: r246043
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Also fix a stray changelog entry. Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.
* configure: Regenerate.
config/
* picflag.m4: Remove stray \xA0 in comment.
gcc/
* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
* configure: Regenerate.
* config.in: Regenerate.
libada/
* Makefile.in (configure_deps): Update and order as per
configure.ac sinclude.
* configure: Regenerate.
libgcc/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libiberty/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libitm/
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
From-SVN: r244049
* configure.ac: Do not create links, only substitute the filenames.
* configure: Regenerate.
* Makefile.in: Assign the substitution results to variables.
(LIBGCC_LINKS): Define.
(enable-execute-stack.c): New rule.
(unwind.h): Likewise.
(md-unwind-support.h): Likewise.
(sfp-machine.h): Likewise.
(gthr-default.h): Likewise.
Add $(LIBGCC_LINKS) to the prerequisites of all object files and
unwind.h as prerequisite of install-unwind_h-forbuild.
From-SVN: r240312
[gcc]
2016-04-11 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/70381
* config/rs6000/rs6000.c (rs6000_opt_masks): Disable using the
target attribute and pragma from changing the -mfloat128
and -mfloat128-hardware options.
* doc/extend.texi (Additional Floating Types): Document PowerPC
__float128 restrictions.
[libgcc]
2016-04-11 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/70381
* configure.ac (powerpc*-*-linux*): Rework tests to build
__float128 emulation routines to not depend on using #pragma GCC
target to enable -mfloat128.
* configure: Regnerate.
[gcc/testsuite]
2016-04-11 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/70381
* gcc.target/powerpc/float128-1.c: New tests to make sure the
__float128 emulator is built and runs.
* gcc.target/powerpc/float128-1.c: Likewise.
* lib/target-supports.exp (check_ppc_float128_sw_available):
Rework tests for __float128 software and hardware
availability. Fix exit condition to return 0 on success.
From-SVN: r234884
gcc/
PR driver/68463
* config/gnu-user.h (CRTOFFLOADBEGIN): Define. Add crtoffloadbegin.o if
offloading is enabled and -fopenacc or -fopenmp is specified.
(CRTOFFLOADEND): Likewise.
(GNU_USER_TARGET_STARTFILE_SPEC): Add CRTOFFLOADBEGIN.
(GNU_USER_TARGET_ENDFILE_SPEC): Add CRTOFFLOADEND.
* lto-wrapper.c (offloadbegin, offloadend): Remove static vars.
(offload_objects_file_name): New static var.
(tool_cleanup): Remove offload_objects_file_name file.
(find_offloadbeginend): Replace with ...
(find_crtoffloadtable): ... this.
(run_gcc): Remove offload_argc and offload_argv.
Get offload_objects_file_name from -foffload-objects=... option.
Read names of object files with offload from this file, pass them to
compile_images_for_offload_targets. Don't call find_offloadbeginend and
don't pass offloadbegin and offloadend to the linker. Don't pass
offload non-LTO files to the linker, because now they're not claimed.
libgcc/
PR driver/68463
* Makefile.in (crtoffloadtable$(objext)): New rule.
* configure.ac (extra_parts): Add crtoffloadtable$(objext) if
enable_offload_targets is not empty.
* configure: Regenerate.
* offloadstuff.c: Move __OFFLOAD_TABLE__ from crtoffloadend to
crtoffloadtable.
libgomp/
PR driver/68463
* testsuite/libgomp.oacc-c-c++-common/parallel-dims-2.c: Remove.
lto-plugin/
PR driver/68463
* lto-plugin.c (struct plugin_offload_file): New.
(offload_files): Change type.
(offload_files_last, offload_files_last_obj): New.
(offload_files_last_lto): New.
(free_2): Adjust accordingly.
(all_symbols_read_handler): Don't add offload files to lto_arg_ptr.
Don't call free_1 for offload_files. Write names of object files with
offloading to the temporary file. Add new option to lto_arg_ptr.
(claim_file_handler): Don't claim file if it contains offload sections
without LTO sections. If it contains offload sections, add to the list.
From-SVN: r233712
2016-01-21 Michael Meissner <meissner@linux.vnet.ibm.com>
Steven Munroe <munroesj@linux.vnet.ibm.com>
Tulio Magno Quites Machado Filho <tulioqm@br.ibm.com>
* config/rs6000/float128-sed: New files to convert TF names to KF
names for PowerPC IEEE 128-bit floating point support.
* config/rs6000/float128-sed-hw: Likewise.
* config/rs6000/float128-hw.c: New file for ISA 3.0 IEEE 128-bit
floating point hardware support.
* config/rs6000/float128-ifunc.c: New file to pick either IEEE
128-bit floating point software emulation or use ISA 3.0 hardware
support if it is available.
* config/rs6000/quad-float128.h: New file to support IEEE 128-bit
floating point.
* config/rs6000/extendkftf2-sw.c: New file, convert IEEE 128-bit
floating point to IBM extended double.
* config/rs6000/trunctfkf2-sw.c: New file, convert IBM extended
double to IEEE 128-bit floating point.
* config/rs6000/t-float128: New Makefile fragments to enable
building __float128 emulation support.
* config/rs6000/t-float128-hw: Likewise.
* config/rs6000/sfp-exceptions.c: New file to provide exception
support for IEEE 128-bit floating point.
* config/rs6000/floattikf.c: New files for converting between IEEE
128-bit floating point and signed/unsigned 128-bit integers.
* config/rs6000/fixunskfti.c: Likewise.
* config/rs6000/fixkfti.c: Likewise.
* config/rs6000/floatuntikf.c: Likewise.
* config/rs6000/sfp-machine.h (_FP_W_TYPE_SIZE): Use 64-bit types
when building on 64-bit systems, or when VSX is enabled.
(_FP_W_TYPE): Likewise.
(_FP_WS_TYPE): Likewise.
(_FP_I_TYPE): Likewise.
(TItype): Define on 64-bit systems.
(UTItype): Likewise.
(TI_BITS): Likewise.
(_FP_MUL_MEAT_D): Add support for using 64-bit types.
(_FP_MUL_MEAT_Q): Likewise.
(_FP_DIV_MEAT_D): Likewise.
(_FP_DIV_MEAT_Q): Likewise.
(_FP_NANFRAC_D): Likewise.
(_FP_NANFRAC_Q): Likewise.
(ISA_BIT): Add exception support if we are being compiled on a
machine with hardware floating point support to build the IEEE
128-bit emulation functions.
(FP_EX_INVALID): Likewise.
(FP_EX_OVERFLOW): Likewise.
(FP_EX_UNDERFLOW): Likewise.
(FP_EX_DIVZERO): Likewise.
(FP_EX_INEXACT): Likewise.
(FP_EX_ALL): Likewise.
(__sfp_handle_exceptions): Likewise.
(FP_HANDLE_EXCEPTIONS): Likewise.
(FP_RND_NEAREST): Likewise.
(FP_RND_ZERO): Likewise.
(FP_RND_PINF): Likewise.
(FP_RND_MINF): Likewise.
(FP_RND_MASK): Likewise.
(_FP_DECL_EX): Likewise.
(FP_INIT_ROUNDMODE): Likewise.
(FP_ROUNDMODE): Likewise.
* libgcc/config.host (powerpc*-*-linux*): If compiler can compile
VSX code, enable IEEE 128-bit floating point. If the compiler can
compile IEEE 128-bit floating point code with ISA 3.0 IEEE 128-bit
floating point hardware instructions and it supports declaring
functions with the ifunc attribute, enable ifunc functions to
switch between software and hardware support.
* configure.ac (powerpc*-*-linux*): Likewise.
* configure: Regenerate.
Co-Authored-By: Steven Munroe <munroesj@linux.vnet.ibm.com>
Co-Authored-By: Tulio Magno Quites Machado Filho <tulioqm@br.ibm.com>
From-SVN: r232685
[gcc]
2016-01-13 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000-builtin.def (BU_FLOAT128_2): Add support
for pack/unpack functions for __ibm128.
(PACK_IF): Likewise.
(UNPACK_IF): Likewise.
* config/rs6000/rs6000.c (rs6000_builtin_mask_calculate): Add
support for __ibm128 pack/unpack functions.
(rs6000_invalid_builtin): Likewise.
(rs6000_init_builtins): Likewise.
(rs6000_opt_masks): Likewise.
* config/rs6000/rs6000.h (MASK_FLOAT128): Add short name.
(RS6000_BTM_FLOAT128): Add support for __ibm128 pack/unpack
functions
(RS6000_BTM_COMMON): Likewise.
* config/rs6000/rs6000.md (f128_vsx): New mode attribute.
(unpack<mode>): Use FMOVE128_FPR iterator instead of FMOVE128, to
disallow __builtin_{pack,unpack}_longdouble if long double is IEEE
128-bit floating point. Add support for the double values to be
in Altivec registers for TF/IF packing and unpacking, but restrict
TD packing sub-fields to be FPR registers. Don't allow overlapped
register support for packing. Allow pack inputs to be memory
locations. Don't build generator functions for unpack<mode>_dm
and unpack<mode>_nodm.
(unpack<mode>_dm): Likewise.
(unpack<mode>_nodm): Likewise.
(pack<mode>): Likewise.
* config/rs6000/rs6000-builtin.def (__builtin_pack_ibm128): Add
built-in functions to pack/unpack explicit __ibm128 values.
(__builtin_unpack_ibm128): Likewise.
* doc/extend.texi (PowerPC Built-in Functions): Document
__builtin_pack_ibm128 and __builtin_unpack_ibm128.
[libgcc]
2016-01-13 Michael Meissner <meissner@linux.vnet.ibm.com>
Steven Munroe <munroesj@linux.vnet.ibm.com>
Tulio Magno Quites Machado Filho <tulioqm@br.ibm.com>
* config/rs6000/sfp-exceptions.c: New file to provide exception
support for IEEE 128-bit floating point.
* config/rs6000/float128-hw.c: New file for ISA 3.0 IEEE 128-bit
floating point hardware support.
* config/rs6000/floattikf.c: New files for IEEE 128-bit floating
point conversions.
* config/rs6000/fixunskfti.c: Likewise.
* config/rs6000/fixkfti.c: Likewise.
* config/rs6000/floatuntikf.c: Likewise.
* config/rs6000/extendkftf2-sw.c: Likewise.
* config/rs6000/trunctfkf2-sw.c: Likewise.
* config/rs6000/float128-ifunc.c: New file to pick either IEEE
128-bit floating point software emulation or use ISA 3.0 hardware
support if it is available.
* config/rs6000/quad-float128.h: New file to support IEEE 128-bit
floating point.
* config/rs6000/t-float128: New Makefile fragments to enable
building __float128 emulation support.
* config/rs6000/t-float128-hw: Likewise.
* config/rs6000/float128-sed: New file to convert TF names to KF
names for PowerPC IEEE 128-bit floating point support.
* config/rs6000/sfp-machine.h (_FP_W_TYPE_SIZE): Use 64-bit types
when building on 64-bit systems, or when VSX is enabled.
(_FP_W_TYPE): Likewise.
(_FP_WS_TYPE): Likewise.
(_FP_I_TYPE): Likewise.
(TItype): Define on 64-bit systems.
(UTItype): Likewise.
(TI_BITS): Likewise.
(_FP_MUL_MEAT_D): Add support for using 64-bit types.
(_FP_MUL_MEAT_Q): Likewise.
(_FP_DIV_MEAT_D): Likewise.
(_FP_DIV_MEAT_Q): Likewise.
(_FP_NANFRAC_D): Likewise.
(_FP_NANFRAC_Q): Likewise.
(ISA_BIT): Add exception support if we are being compiled on a
machine with hardware floating point support to build the IEEE
128-bit emulation functions.
(FP_EX_INVALID): Likewise.
(FP_EX_OVERFLOW): Likewise.
(FP_EX_UNDERFLOW): Likewise.
(FP_EX_DIVZERO): Likewise.
(FP_EX_INEXACT): Likewise.
(FP_EX_ALL): Likewise.
(__sfp_handle_exceptions): Likewise.
(FP_HANDLE_EXCEPTIONS): Likewise.
(FP_RND_NEAREST): Likewise.
(FP_RND_ZERO): Likewise.
(FP_RND_PINF): Likewise.
(FP_RND_MINF): Likewise.
(FP_RND_MASK): Likewise.
(_FP_DECL_EX): Likewise.
(FP_INIT_ROUNDMODE): Likewise.
(FP_ROUNDMODE): Likewise.
* configure.ac (powerpc*-*-linux*): Check whether the PowerPC
compiler can do __float128.
* configure: Regenerate.
* libgcc/config.host (powerpc*-*-linux*): If compiler can compile
VSX code, enable IEEE 128-bit floating point.
From-SVN: r232346
Patch in the bottom adds support of IA MCU psABI to libgcc (enables
soft-fp) and libdecnumber (enables it for IA MCU).
config/
* dfp.m4 (enable_decimal_float): Also set to yes for
i?86*-*-elfiamcu target.
gcc/
* configure: Regenerated.
libdecnumber/
* configure: Regenerated.
libgcc/
* config.host: Support i[34567]86-*-elfiamcu target.
* config/t-softfp-sfdftf: New file.
* config/i386/32/t-iamcu: Likewise.
* configure: Regenerated.
From-SVN: r225198
* Makefile.in (real_host_noncanonical): New variable.
(libsubdir): Use it.
* configure.ac (real_host_noncanonical): Compute. Remove special
case for intelmicemul.
* configure: Regenerate.
From-SVN: r222585
PR target/65351
config/
* mh-darwin: Only apply -mdynamic-no-pic for m32 Darwin when the compiler in
use supports -mno-dynamic-no-pic.
* picflag.m4: Only append -mno-dynamic-no-pic for Darwin when -mdynamic-no-pic
is present in CFLAGS.
libiberty/
* configure: Regenerate.
libada/
* configure: Regenerate.
libgcc/
* configure: Regenerate.
gcc/
* configure: Regenerate.
Co-Authored-By: Iain Sandoe <iain@codesourcery.com>
From-SVN: r221967
call0 is an ABI that doesn't use register windows.
2015-03-03 Max Filippov <jcmvbkbc@gmail.com>
gcc/
* config/xtensa/constraints.md ("a" constraint): Include stack
pointer in case of call0 ABI.
("q" constraint): Make empty in case of call0 ABI.
("D" constraint): Include stack pointer in case of call0 ABI.
* config/xtensa/xtensa-protos.h (xtensa_set_return_address,
xtensa_expand_epilogue, xtensa_regno_to_class): Add new function
prototypes.
* config/xtensa/xtensa.c (xtensa_callee_save_size): New
variable.
(xtensa_regno_to_class): Make it a local variable in the
function xtensa_regno_to_class.
(xtensa_function_epilogue, TARGET_ASM_FUNCTION_EPILOGUE): Remove
macro, function prototype and implementation.
(reg_nonleaf_alloc_order): Make it a local variable in the
function order_regs_for_local_alloc.
(xtensa_conditional_register_usage): New function.
(TARGET_CONDITIONAL_REGISTER_USAGE): Define macro.
(xtensa_valid_move): Allow direct moves to stack pointer
register in call0 ABI.
(xtensa_setup_frame_addresses): Only spill register windows in
windowed ABI.
(xtensa_emit_call): Emit call(x)8 or call(x)0 in windowed and
call0 ABI respectively.
(xtensa_function_arg_1): Only mark a7 register for copying in
windowed ABI.
(xtensa_call_save_reg): New function.
(compute_frame_size): Add space for callee saved register
storage to the frame size in call0 ABI.
(xtensa_expand_prologue): Generate code to set up stack frame
and save callee-saved registers in call0 ABI.
(xtensa_expand_epilogue): New function.
(xtensa_set_return_address): New function.
(xtensa_return_addr): Calculate return address in call0 ABI.
(xtensa_builtin_saveregs): Only mark a7 register for copying and
emit copying code in windowed ABI.
(order_regs_for_local_alloc): Add preferred register allocation
order for non-leaf function in call0 ABI.
(xtensa_static_chain): Add atatic chain passing for call0 ABI.
(xtensa_asm_trampoline_template): Add trampoline generation for
call0 ABI.
(xtensa_trampoline_init): Add trampoline initialization for
call0 ABI.
(xtensa_conditional_register_usage, xtensa_regno_to_class): New
functions.
* config/xtensa/xtensa.h (TARGET_WINDOWED_ABI): New macro.
(TARGET_CPU_CPP_BUILTINS): Add built-in define for call0 ABI.
(CALL_USED_REGISTERS): Modify to encode both windowed and call0
ABI call-used registers.
(HARD_FRAME_POINTER_REGNUM): Add frame pointer for call0 ABI.
(INCOMING_REGNO, OUTGOING_REGNO): Use argument unchanged in
call0 ABI.
(REG_CLASS_CONTENTS): Include all registers into the preferred
reload registers set, adjust the set in the
xtensa_conditional_register_usage.
(xtensa_regno_to_class): Drop variable declaration.
(REGNO_REG_CLASS): Redefine to use xtensa_regno_to_class
function.
(WINDOW_SIZE): Define as 8 or 0 for windowed and call0 ABI
respectively.
(FUNCTION_PROFILER): Add _mcount call for call0 ABI.
(TRAMPOLINE_SIZE): Define trampoline size for call0 ABI.
(RETURN_ADDR_IN_PREVIOUS_FRAME): Define to 0 in call0 ABI.
(ASM_OUTPUT_POOL_PROLOGUE): Always generate literal pool
location in call0 ABI.
(EH_RETURN_STACKADJ_RTX): New definition, use a10 for passing
stack adjustment size when handling exception.
(CRT_CALL_STATIC_FUNCTION): Add definition for call0 ABI.
* config/xtensa/xtensa.md (A9_REG, UNSPECV_BLOCKAGE): New
definitions.
("return" pattern): Generate ret.n/ret in call0 ABI.
("epilogue" pattern): Expand epilogue.
("nonlocal_goto" pattern): Use default in call0 ABI.
("eh_return" pattern): Move implementation to eh_set_a0_windowed,
emit eh_set_a0_* depending on ABI.
("eh_set_a0_windowed" pattern): Former eh_return pattern.
("eh_set_a0_call0", "blockage"): New patterns.
libgcc/
* config/xtensa/lib2funcs.S (__xtensa_libgcc_window_spill,
__xtensa_nonlocal_goto): Don't compile for call0 ABI.
(__xtensa_sync_caches): Only use entry and retw in windowed ABI,
use ret in call0 ABI.
* config/xtensa/t-windowed: New file.
* libgcc/config/xtensa/t-xtensa (LIB2ADDEH): Move to t-windowed.
* libgcc/configure: Regenerated.
* libgcc/configure.ac: Check if xtensa target is configured for
windowed ABI and thus needs to use custom unwind code.
From-SVN: r221158
PR target/65038
* config.in: Regenerated.
* configure: Likewise.
* configure.ac (AC_HEADER_STDC): Added explicit.
(AC_CHECK_HEADERS): Check for default headers plus
for ftw.h header.
* libgcov-util.c (gcov_read_profile_dir): Disable use
of ftw-function, if header is not found.
(ftw_read_file): Likewise.
From-SVN: r221059
* configure: Regenerate.
* configure.ac (--enable-as-accelerator-for)
(--enable-offload-targets): New configure options.
gcc/
* Makefile.in (real_target_noncanonical, accel_dir_suffix)
(enable_as_accelerator): New variables substituted by configure.
(libsubdir, libexecsubdir, unlibsubdir): Tweak for the possibility of
being configured as an offload compiler.
(DRIVER_DEFINES): Pass new defines DEFAULT_REAL_TARGET_MACHINE and
ACCEL_DIR_SUFFIX.
(install-cpp, install-common, install_driver, install-gcc-ar): Do not
install for the offload compiler.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (real_target_noncanonical, accel_dir_suffix)
(enable_as_accelerator): Compute new variables.
(ACCEL_COMPILER): Define if the compiler is built as the accel compiler.
(OFFLOAD_TARGETS): List of target names suitable for offloading.
(ENABLE_OFFLOADING): Define if list of offload targets is not empty.
gcc/cp/
* Make-lang.in (c++.install-common): Do not install for the offload
compiler.
gcc/doc/
* install.texi (Options specification): Document
--enable-as-accelerator-for and --enable-offload-targets.
gcc/fortran/
* Make-lang.in (fortran.install-common): Do not install for the offload
compiler.
libgcc/
* Makefile.in (crtoffloadbegin$(objext)): New rule.
(crtoffloadend$(objext)): Likewise.
* configure: Regenerate.
* configure.ac (accel_dir_suffix): Compute new variable.
(extra_parts): Add crtoffloadbegin.o and crtoffloadend.o
if enable_offload_targets is not empty.
* offloadstuff.c: New file.
libgomp/
* config.h.in: Regenerate.
* configure: Regenerate.
* configure.ac: Check for libdl, required for plugin support.
(PLUGIN_SUPPORT): Define if plugins are supported.
(enable_offload_targets): Support Intel MIC targets.
(OFFLOAD_TARGETS): List of target names suitable for offloading.
lto-plugin/
* Makefile.am (libexecsubdir): Tweak for the possibility of being
configured for offload compiler.
(accel_dir_suffix, real_target_noncanonical): New variables substituted
by configure.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (accel_dir_suffix, real_target_noncanonical): Compute new
variables.
Co-Authored-By: Andrey Turetskiy <andrey.turetskiy@intel.com>
Co-Authored-By: Ilya Verbin <ilya.verbin@intel.com>
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
From-SVN: r217485
Continuing preparations for implementing
TARGET_ATOMIC_ASSIGN_EXPAND_FENV for powerpc*-*-linux* soft-float and
e500, this patch makes soft-fp symbols used for those targets into
compat symbols when building with glibc >= 2.19, so that they are only
in shared libgcc for existing binaries requiring them, not in static
libgcc and not available for new links using shared libgcc. Instead,
new links will get the symbols from libc, which has exported all of
them since 2.19. (Actually all the symbols were exported from glibc
since 2.4, but some of them were exported by glibc as compat symbols
only - because of a confusion between deliberately present soft-fp
symbols and old accidental reexports of libgcc functions from glibc
2.0 - until 2.19.)
This allows user floating-point arithmetic to interoperate properly
with the state handled by <fenv.h> functions, whether software state
(for soft-float; TLS variables that don't form a public part of
glibc's ABI, so can only be accessed directly by functions within
glibc) or hardware state (for e500 - the copies of the soft-fp
functions in glibc being built to interoperate with the hardware state
whereas those in libgcc aren't). Previously only glibc's own
functions, and those operations done in hardware on e500, properly
worked with that state, not direct floating-point arithmetic
operations that were implemented in software.
The intended next step is the actual TARGET_ATOMIC_ASSIGN_EXPAND_FENV
implementation.
The test of glibc >= 2.19 uses the same --with-glibc-version configure
option as in the gcc/ directory (but differently implemented; in gcc/
the fallback is to examine headers to find the version, while in
libgcc/ we can use compile for the target and so use AC_COMPUTE_INT).
The TARGET_ATOMIC_ASSIGN_EXPAND_FENV implementation will also only do
anything for glibc >= 2.19, as it will depend on generating calls to
functions __atomic_feholdexcept __atomic_feclearexcept
__atomic_feupdateenv that were added in 2.19 for that purpose (even
for e500, inline code is not readily possible because of the need to
make prctl syscalls from the implementation of these functions).
In order to make symbols compat symbols, the soft-fp files need
wrapping with generated wrappers including asm .symver directives,
which need to name the symbol version in question. This is extracted
by an awk script from an intermediate stage of generating the .map
file for linking libgcc (that .map itself depends on the objects that
go into the library, so can't be used for this purpose as that would
mean a circular dependency); the extraction is not fully general
regarding the features available in .map generation, but suffices for
the present purpose.
It would make sense for hardfp.c symbols to be compat symbols as well
(in the cases where hardfp.c gets used, the functions in question
should not be used for new links), but this isn't required for the
present purpose, which is only concerned with ensuring that where
functions that should be affected by rounding modes or exceptions get
used, those functions are actually affected by those rounding modes or
exceptions.
Tested with no regressions with cross to powerpc-linux-gnu
(soft-float); c11-atomic-exec-5.c moves from UNSUPPORTED to FAIL, as
expected, now that floating-point arithmetic in user programs uses the
same state as <fenv.h> functions, so the fenv_exceptions test passes,
but TARGET_ATOMIC_ASSIGN_EXPAND_FENV isn't yet implemented. (For
e500, c11-atomic-exec-5.c was already FAILing, as enough operations
worked with the hardware state for the fenv_exceptions effective
target test to pass.) Also verified that the exported symbols and
versions are unchanged, with the expected symbols becoming compat
symbols at the same versions, and that with --with-glibc-version=2.18
the symbols remain normal rather than compat symbols.
* Makefile.in (libgcc.map.in): New target.
(libgcc.map): Use libgcc.map.in.
* config/t-softfp (softfp_compat): New variable to be set by
users.
[$(softfp_compat) = y] (softfp_map_dep, softfp_set_symver): New
variables.
[$(softfp_compat) = y] (softfp_file_list): Use files in the build
directory.
[$(softfp_compat) = y] ($(softfp_file_list)): Generate wrappers
that use compat symbols and disable all code unless [SHARED].
* config/t-softfp-compat: New file.
* find-symver.awk: New file.
* configure.ac (--with-glibc-version): New configure option.
(ppc_fp_compat): New variable set for powerpc*-*-linux*.
* configure: Regenerate.
* config.host (powerpc*-*-linux*): Use ${ppc_fp_compat} for
soft-float and e500.
From-SVN: r216942
Continuing the cleanups of libgcc soft-fp configuration for
powerpc*-*-linux* in preparation for implementing
TARGET_ATOMIC_ASSIGN_EXPAND_FENV for soft-float and e500, this patch
optimizes the choice of which functions to build for the 32-bit
classic hard-float and soft-float cases. (e500 will be dealt with in
a separate patch which will need to add new features to t-hardfp and
t-softfp; this patch keeps the status quo for e500.)
For hard-float, while the functions in question are part of the libgcc
ABI there is no need for them to contain software floating point code:
no newly built code should use them, and if anything does use them
it's most efficient (space and speed) for them to pass straight
through to floating-point hardware instructions; this case is made to
use t-hardfp to achieve that. For soft-float, direct use of soft-fp
functions for operations involving DImode or unsigned integers is more
efficient than using the libgcc2.c versions of those operations to
convert to operations on other types (which then end up calling
soft-fp functions for those other types, possibly more than once);
this case is thus stopped from using t-softfp-excl. (A future patch
will stop the e500 cases from using t-softfp-excl as well.)
Tested with no regressions for crosses to powerpc-linux-gnu (soft
float and classic hard float); also checked that the same set of
symbols and versions is exported from shared libgcc before and after
the patch.
* configure.ac (ppc_fp_type): Set variable on powerpc*-*-linux*.
* configure: Regenerate.
* config.host (powerpc*-*-linux*): Use $ppc_fp_type to determine
additions to tmake_file. Use t-hardfp-sfdf and t-hardfp instead
of soft-fp for 32-bit classic hard float. Do not use
t-softfp-excl for soft float.
From-SVN: r216687
uClibc can be built without fenv support, extend the configure check for
decimal floating point to probe the existance of fenv.h, too.
libgcc/ChangeLog:
2013-03-24 Bernhard Reutner-Fischer <aldot@gcc.gnu.org>
* configure.ac (libgcc_cv_dfp): Extend check to probe fenv.h
availability.
* configure: Regenerate
From-SVN: r204562
Commit the vtable verification feature. This feature is designed to
detect, at run time, if/when the vtable pointer in a C++ object has
been corrupted, before allowing virtual calls through that pointer.
If pointer corruption is detected, execution of the program is halted.
libstdc++-v3 ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* fragment.am: Add XTEMPLATE_FLAGS.
* configure.ac: Add definitions for --enable-vtable-verify.
* acinclude.m4: Add --enable-vtable-verify and
--disable-vtable-verify; define --enable-vtable-verify; define
VTV_CXXFLAGS, VTV_PCH_CXXFLAGS and VTV_CXXLINKFLAGS.
* config/abi/pre/gnu.ver: Export symbols for vtable verification.
* libsupc++/Makefile.am: Define vtv_sources and add it to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES.
* libsupc++/vtv_stubs.cc: New file.
* include/Makefile.am: Add VTV_PCH_CXXFLAGS to PCHFLAGS.
* src/Makefile.am: Add VTV_CXXFLAGS to AM_CXXFLAGS; add
VTV_CXXLINKFLAGS to CXXLINK.
* src/c++98/Makefile.am: Comment out XTEMPLATE_FLAGS; add VTV_CXXFLAGS
to AM_CXXFLAGS; add VTV_CXXXLINKFLAGS to CXXLINK.
* src/C++11/Makefile.am: Ditto.
* doc/xml/manual/configure.xml: Add entry for --enable-vtable-verify.
* scripts/testsuite_flags.in: Add cxxvtvflags to Usage; cause
cxxvtvflags to use VTV_CXXFLAGS and VTV_CXXLINKFLAGS.
* testsuite/lib/libstdc++.exp: Add cxxvtvflags; add code to locate
libvtv if --enable-vtable-verify was used; set cxxvtvflags; add
cxxvtvflags to cxx_final.
* testsuite/18_support/bad_exception/23591_thread-1.c: Add
-fvtable-verify=none to compiler flags.
* testsuite/17_intro/freestanding.cc: Add -fvtable-verify=none
to compiler flags.
* configure: Regenerated.
* Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* config.h.in: Regenerated.
* po/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
top level ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* configure.ac: Add target-libvtv to target_libraries; disable libvtv
on non-linux systems; add target-libvtv to noconfigdirs; add
libsupc++/.libs to C++ library search paths.
* configure: Regenerated.
* Makefile.def: Add libvtv to target_modules; make libvtv depend on
libstdc++ and libgcc.
* Makefile.in: Regenerated.
include/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* vtv-change-permission.h: New file.
contrib/ChangeLog:
2013-08-06 Caroline Tice4 <cmtice@google.com>
* gcc_update: Add libvtv files.
libgcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
config.host (extra_parts): Add vtv_start.o, vtv_end.o
vtv_start_preinit.o and vtv_end_preinit.o.
configure.ac: Add code to check/set enable_vtable_verify.
Makefile.in: Add rules to build vtv_*.o, if enable_vtable_verify is
true.
vtv_start_preinit.c: New file.
vtv_end_preinit.c: New file.
vtv_start.c: New file.
vtv_end.c: New file.
configure: Regenerated.
gcc/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* gcc.c (VTABLE_VERIFICATION_SPEC): New definition.
(LINK_COMMAND_SPEC): Add VTABLE_VERIFICATION_SPEC.
* tree-pass.h: Add pass_vtable_verify.
* varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section.
(assemble_vtyv_preinit_initializer): New function.
(default_sectin_type_flags): Make sure .vtable_map_vars section has
LINK_ONCE flag.
* output.h: Add function decl for assemble_vtv_preinit_initializer.
* vtable-verify.c: New file.
* vtable-verify.h: New file.
* flag-types.h (enum vtv_priority): Defintions for flag_vtable_verify
initialiation levels.
* timevar.def (TV_VTABLE_VERIFICATION): New definition.
* passes.def: Insert pass_vtable_verify.
* aclocal.m4: Reorder includes.
* doc/invoke.texi: Add documentation for the flags -fvtable-verify=,
-fvtv-debug and -fvtv-counts.
* config/gnu-user.h (GNU_USER_TARGET_STARTFILE_SPEC): Add vtv_start*.o,
as appropriate, if -fvtable-verify=... is used.
(GNU_USER_TARGET_ENDFILE_SPEC): Add vtv_end*.o as appropriate, if
-fvtable-verify=... is used.
* Makefile.in (OBJS): Add vtable-verify.o to list.
(vtable-verify.o): Add new build rule.
(GTFILES): Add vtable-verify.c to list.
* common.opt (fvtable-verify=): New flag.
(vtv_priority): Values for fvtable-verify= flag.
(fvtv-counts): New flag.
(fvtv-debug): New flag.
* tree.h (save_vtable_map_decl): New extern function decl.
gcc/cp/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
* Make-lang.in (*CXX_AND_OBJCXX_OBJS): Add vtable-class-hierarchy.o to
list.
(vtable-class-hierarchy.o): Add build rule.
* cp-tree.h (vtv_start_verification_constructor_init_function): New
extern function decl.
(vtv_finish_verification_constructor_init_function): New extern
function decl.
(build_vtbl_address): New extern function decl.
(get_mangled_vtable_map_var_name): New extern function decl.
(vtv_compute_class_hierarchy_transitive_closure): New extern function
decl.
(vtv_generate_init_routine): New extern function decl.
(vtv_save_class_info): New extern function decl.
(vtv_recover_class_info): New extern function decl.
(vtv_build_vtable_verify_fndecl): New extern function decl.
* class.c (finish_struct_1): Add call to vtv_save_class_info if
flag_vtable_verify is true.
* config-lang.in: Add vtable-class-hierarchy.c to gtfiles list.
* vtable-class-hierarchy.c: New file.
* mangle.c (get_mangled_vtable_map_var_name): New function.
* decl2.c (start_objects): Update function comment.
(cp_write_global_declarations): Call vtv_recover_class_info,
vtv_compute_class_hierarchy_transitive_closure and
vtv_build_vtable_verify_fndecl, before calling
finalize_compilation_unit, and call vtv_generate_init_rount after, IFF
flag_vtable_verify is true.
(vtv_start_verification_constructor_init_function): New function.
(vtv_finish_verification_constructor_init_function): New function.
* init.c (build_vtbl_address): Remove static qualifier from function.
libvtv/ChangeLog:
2013-08-06 Caroline Tice <cmtice@google.com>
Initial check-in of new vtable verification feature.
* configure.ac : New file.
* acinclude.m4 : New file.
* Makefile.am : New file.
* aclocal.m4 : New file.
* configure.tgt : New file.
* configure: New file (generated).
* Makefile.in: New file (generated).
* vtv_set.h : New file.
* vtv_utils.cc : New file.
* vtv_utils.h : New file.
* vtv_malloc.cc : New file.
* vtv_rts.cc : New file.
* vtv_malloc.h : New file.
* vtv_rts.h : New file.
* vtv_fail.cc : New file.
* vtv_fail.h : New file.
* vtv_map.h : New file.
* scripts/run-testsuite.sh : New file.
* scripts/sum-vtv-counts.c : New file.
* testsuite/parts-test-main.h : New file.
* testusite/dataentry.cc : New file.
* testsuite/temp_deriv.cc : New file.
* testsuite/register_pair.cc : New file.
* testsuite/virtual_inheritance.cc : New file.
* testsuite/field-test.cc : New file.
* testsuite/nested_vcall_test.cc : New file.
* testsuite/template-list-iostream.cc : New file.
* testsuite/register_pair_inserts.cc : New file.
* testsuite/register_pair_inserts_mt.cc : New file.
* testsuite/event.list : New file.
* testsuite/parts-test-extra-parts-views.cc : New file.
* testsuite/parts-test-extra-parts-views.h : New file.
* testsuite/environment-fail-32.s : New file.
* testsuite/parts-test-extra-parts.h : New file.
* testsuite/temp_deriv2.cc : New file.
* testsuite/dlopen_mt.cc : New file.
* testsuite/event.h : New file.
* testsuite/template-list.cc : New file.
* testsuite/replace-fail.cc : New file.
* testsuite/Makefile.am : New file.
* testsuite/Makefile.in: New file (generated).
* testsuite/mempool_negative.c : New file.
* testsuite/parts-test-main.cc : New file.
* testsuite/event-private.cc : New file.
* testsuite/thunk.cc : New file.
* testsuite/event-defintiions.cc : New file.
* testsuite/event-private.h : New file.
* testsuite/parts-test.list : New file.
* testusite/register_pair_mt.cc : New file.
* testsuite/povray-derived.cc : New file.
* testsuite/event-main.cc : New file.
* testsuite/environment.cc : New file.
* testsuite/template-list2.cc : New file.
* testsuite/thunk_vtable_map_attack.cc : New file.
* testsuite/parts-test-extra-parts.cc : New file.
* testsuite/environment-fail-64.s : New file.
* testsuite/dlopen.cc : New file.
* testsuite/so.cc : New file.
* testsuite/temp_deriv3.cc : New file.
* testsuite/const_vtable.cc : New file.
* testsuite/mempool_positive.c : New file.
* testsuite/dup_name.cc : New file.
From-SVN: r201555
2012-05-21 Andrew Pinski <apinski@cavium.com>
PR bootstrap/53183
* configure.ac: Define the default includes to being none.
* configure: Regenerate.
From-SVN: r187732
