Initial revision

From-SVN: r74671

libjava/libltdl/config-h.in

@@ -0,0 +1,193 @@
+/* config-h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the `argz_append' function. */
+#undef HAVE_ARGZ_APPEND
+
+/* Define to 1 if you have the `argz_create_sep' function. */
+#undef HAVE_ARGZ_CREATE_SEP
+
+/* Define to 1 if you have the <argz.h> header file. */
+#undef HAVE_ARGZ_H
+
+/* Define to 1 if you have the `argz_insert' function. */
+#undef HAVE_ARGZ_INSERT
+
+/* Define to 1 if you have the `argz_next' function. */
+#undef HAVE_ARGZ_NEXT
+
+/* Define to 1 if you have the `argz_stringify' function. */
+#undef HAVE_ARGZ_STRINGIFY
+
+/* Define to 1 if you have the <assert.h> header file. */
+#undef HAVE_ASSERT_H
+
+/* Define to 1 if you have the `bcopy' function. */
+#undef HAVE_BCOPY
+
+/* Define to 1 if you have the `closedir' function. */
+#undef HAVE_CLOSEDIR
+
+/* Define to 1 if you have the <ctype.h> header file. */
+#undef HAVE_CTYPE_H
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_DIRENT_H
+
+/* Define if you have the GNU dld library. */
+#undef HAVE_DLD
+
+/* Define to 1 if you have the <dld.h> header file. */
+#undef HAVE_DLD_H
+
+/* Define to 1 if you have the `dlerror' function. */
+#undef HAVE_DLERROR
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <dl.h> header file. */
+#undef HAVE_DL_H
+
+/* Define if you have the _dyld_func_lookup function. */
+#undef HAVE_DYLD
+
+/* Define to 1 if you have the <errno.h> header file. */
+#undef HAVE_ERRNO_H
+
+/* Define to 1 if the system has the type `error_t'. */
+#undef HAVE_ERROR_T
+
+/* Define to 1 if you have the `index' function. */
+#undef HAVE_INDEX
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if you have the libdl library or equivalent. */
+#undef HAVE_LIBDL
+
+/* Define to 1 if you have the <mach-o/dyld.h> header file. */
+#undef HAVE_MACH_O_DYLD_H
+
+/* Define to 1 if you have the <malloc.h> header file. */
+#undef HAVE_MALLOC_H
+
+/* Define to 1 if you have the `memcpy' function. */
+#undef HAVE_MEMCPY
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the `opendir' function. */
+#undef HAVE_OPENDIR
+
+/* Define if libtool can extract symbol lists from object files. */
+#undef HAVE_PRELOADED_SYMBOLS
+
+/* Define to 1 if you have the `readdir' function. */
+#undef HAVE_READDIR
+
+/* Define to 1 if you have the `rindex' function. */
+#undef HAVE_RINDEX
+
+/* Define if you have the shl_load function. */
+#undef HAVE_SHL_LOAD
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strchr' function. */
+#undef HAVE_STRCHR
+
+/* Define to 1 if you have the `strcmp' function. */
+#undef HAVE_STRCMP
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strrchr' function. */
+#undef HAVE_STRRCHR
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_SYS_DIR_H
+
+/* Define to 1 if you have the <sys/dl.h> header file. */
+#undef HAVE_SYS_DL_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_SYS_NDIR_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define if the OS needs help to load dependent libraries for dlopen(). */
+#undef LTDL_DLOPEN_DEPLIBS
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LTDL_OBJDIR
+
+/* Define to the name of the environment variable that determines the dynamic
+   library search path. */
+#undef LTDL_SHLIBPATH_VAR
+
+/* Define to the extension used for shared libraries, say, ".so". */
+#undef LTDL_SHLIB_EXT
+
+/* Define to the system default library search path. */
+#undef LTDL_SYSSEARCHPATH
+
+/* Define if dlsym() requires a leading underscore in symbol names. */
+#undef NEED_USCORE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to a type to use for `error_t' if it is not otherwise available. */
+#undef error_t
+
+/* Define as `__inline' if that's what the C compiler calls it, or to nothing
+   if it is not supported. */
+#undef inline

libjava/libltdl/configure.ac

@@ -0,0 +1,79 @@
+## Process this file with autoconf to create configure. -*- autoconf -*-
+# Copyright 2001  Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+# 02111-1307  USA
+
+
+## FIXME: Is this really new enough? ##
+AC_PREREQ(2.50)
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([libltdl], [1.2], [bug-libtool@gnu.org])
+AC_CONFIG_SRCDIR([ltdl.c])
+
+
+## ------------------------------- ##
+## Libltdl specific configuration. ##
+## ------------------------------- ##
+
+AC_CONFIG_AUX_DIR([.])
+
+if test -z "$enable_ltdl_install$enable_ltdl_convenience"; then
+  if test -f ${srcdir}/ltmain.sh; then
+    # if libltdl is libtoolized, it is assumed to be stand-alone and
+    # installed unless the command line overrides it (tested above)
+    enable_ltdl_install=yes
+  else
+    AC_MSG_WARN([*** The top-level configure must select either])
+    AC_MSG_WARN([*** [A""C_LIBLTDL_INSTALLABLE] or [A""C_LIBLTDL_CONVENIENCE].])
+    AC_MSG_ERROR([*** Maybe you want to --enable-ltdl-install?])
+  fi
+fi
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE(AC_PACKAGE_TARNAME, AC_PACKAGE_VERSION, -)
+AM_CONFIG_HEADER([config.h:config-h.in])
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+AC_PROG_CC
+AC_C_CONST
+AC_C_INLINE
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+AC_LIBTOOL_WIN32_DLL
+AC_PROG_LIBTOOL
+AC_SUBST([LIBTOOL_DEPS])
+
+AC_LIB_LTDL
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT

libjava/libltdl/install-sh

@@ -0,0 +1,276 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd=$cpprog
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd=$stripprog
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "$0: no input file specified" >&2
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+
+	if [ -d "$dst" ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f "$src" ] || [ -d "$src" ]
+	then
+		:
+	else
+		echo "$0: $src does not exist" >&2
+		exit 1
+	fi
+
+	if [ x"$dst" = x ]
+	then
+		echo "$0: no destination specified" >&2
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d "$dst" ]
+	then
+		dst=$dst/`basename "$src"`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-$defaultIFS}"
+
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp=$pathcomp$1
+	shift
+
+	if [ ! -d "$pathcomp" ] ;
+        then
+		$mkdirprog "$pathcomp"
+	else
+		:
+	fi
+
+	pathcomp=$pathcomp/
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd "$dst" &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ]
+	then
+		dstfile=`basename "$dst"`
+	else
+		dstfile=`basename "$dst" $transformbasename |
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ]
+	then
+		dstfile=`basename "$dst"`
+	else
+		:
+	fi
+
+# Make a couple of temp file names in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+	rmtmp=$dstdir/#rm.$$#
+
+# Trap to clean up temp files at exit.
+
+	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+	trap '(exit $?); exit' 1 2 13 15
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd "$src" "$dsttmp" &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location.  We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons.  In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+	if [ -f "$dstdir/$dstfile" ]
+	then
+		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+		{
+		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		  (exit 1); exit
+		}
+	else
+		:
+	fi
+} &&
+
+# Now rename the file to the real destination.
+
+	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
+fi &&
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+
+{
+	(exit 0); exit
+}

libjava/libltdl/missing

@@ -0,0 +1,336 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.4 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0

libjava/libltdl/mkinstalldirs

@@ -0,0 +1,111 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+  case $1 in
+    -h | --help | --h*)         # -h for help
+      echo "$usage" 1>&2
+      exit 0
+      ;;
+    -m)                         # -m PERM arg
+      shift
+      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+      dirmode=$1
+      shift
+      ;;
+    --)                         # stop option processing
+      shift
+      break
+      ;;
+    -*)                         # unknown option
+      echo "$usage" 1>&2
+      exit 1
+      ;;
+    *)                          # first non-opt arg
+      break
+      ;;
+  esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+  0) exit 0 ;;
+esac
+
+case $dirmode in
+  '')
+    if mkdir -p -- . 2>/dev/null; then
+      echo "mkdir -p -- $*"
+      exec mkdir -p -- "$@"
+    fi
+    ;;
+  *)
+    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+      echo "mkdir -m $dirmode -p -- $*"
+      exec mkdir -m "$dirmode" -p -- "$@"
+    fi
+    ;;
+esac
+
+for file
+do
+  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  shift
+
+  pathcomp=
+  for d
+  do
+    pathcomp="$pathcomp$d"
+    case $pathcomp in
+      -*) pathcomp=./$pathcomp ;;
+    esac
+
+    if test ! -d "$pathcomp"; then
+      echo "mkdir $pathcomp"
+
+      mkdir "$pathcomp" || lasterr=$?
+
+      if test ! -d "$pathcomp"; then
+  	errstatus=$lasterr
+      else
+  	if test ! -z "$dirmode"; then
+	  echo "chmod $dirmode $pathcomp"
+    	  lasterr=""
+  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+  	  if test ! -z "$lasterr"; then
+  	    errstatus=$lasterr
+  	  fi
+  	fi
+      fi
+    fi
+
+    pathcomp="$pathcomp/"
+  done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
+# mkinstalldirs ends here