gcc/intl/plural.y

435 lines
8.5 KiB
Plaintext
Raw Normal View History

%{
/* Expression parsing for plural form selection.
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
Copyright (C) 2000-2020 Free Software Foundation, Inc.
Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU Library General Public License as published
by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301,
USA. */
/* The bison generated parser uses alloca. AIX 3 forces us to put this
declaration at the beginning of the file. The declaration in bison's
skeleton file comes too late. This must come before <config.h>
because <config.h> may include arbitrary system headers. */
#if defined _AIX && !defined __GNUC__
#pragma alloca
#endif
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
intl: New directory; see intl/ChangeLog for details. top: * intl: New directory; see intl/ChangeLog for details. * ABOUT-NLS, config.rpath: Import from gettext 0.12.1. * Makefile.tpl: all-gcc depends on maybe-all-intl. * Makefile.in: Regenerate. config: * gettext.m4: New file - copy of gettext.m4 from binutils CVS, with added AC_ISC_POSIX macro from gcc/aclocal.m4. gcc: * ABOUT-NLS: Delete. * intl: Delete entire directory. * aclocal.m4: Include ../config/gettext.m4. Delete AC_ISC_POSIX, AM_LANGINFO_CODESET, jm_GLIBC21, AM_LC_MESSAGES, AM_PATH_PROG_WITH_TEST, AM_WITH_NLS, and AM_GNU_GETTEXT. * configure.in: Use CY_GNU_GETTEXT, not AM_GNU_GETTEXT. Remove intl/Makefile from all_outputs. * configure, config.in: Regenerate. * Makefile.in: Expunge all references to intl subdirectory. Add -I../intl to INCLUDES. * intl.h: Include libintl.h if and only if ENABLE_NLS is defined. intl: * Makefile.in: Remove unnecessary capabilities for installation, build of shared libraries, generation of distribution tarballs, etc. Fix all the places that rely on the parent directory. Don't generate libgnuintl.h from anything; do generate $(objdir)/libintl.h from libgnuintl.h if necessary. Adjust DEFS for use of config.h. * libgnuintl.h.in: Rename libgnuintl.h. * README: New file. * config.charset, ref-add.sin, ref-del.sin: Delete (unused). * COPYING.LIB-2.0, COPYING.LIB-2.1: Delete (redundant). * aclocal.m4: New; generated per instructions in gettext manual. * configure.in: New; written from scratch for this configuration. * configure, config.h.in: Generated. contrib: * gcc_update: Remove gcc/intl/plural.c from list. Add new generated files intl/plural.c, intl/configure, intl/config.h.in. From-SVN: r68928
2003-07-05 02:18:54 +08:00
#include <stddef.h>
#include <stdlib.h>
intl: New directory; see intl/ChangeLog for details. top: * intl: New directory; see intl/ChangeLog for details. * ABOUT-NLS, config.rpath: Import from gettext 0.12.1. * Makefile.tpl: all-gcc depends on maybe-all-intl. * Makefile.in: Regenerate. config: * gettext.m4: New file - copy of gettext.m4 from binutils CVS, with added AC_ISC_POSIX macro from gcc/aclocal.m4. gcc: * ABOUT-NLS: Delete. * intl: Delete entire directory. * aclocal.m4: Include ../config/gettext.m4. Delete AC_ISC_POSIX, AM_LANGINFO_CODESET, jm_GLIBC21, AM_LC_MESSAGES, AM_PATH_PROG_WITH_TEST, AM_WITH_NLS, and AM_GNU_GETTEXT. * configure.in: Use CY_GNU_GETTEXT, not AM_GNU_GETTEXT. Remove intl/Makefile from all_outputs. * configure, config.in: Regenerate. * Makefile.in: Expunge all references to intl subdirectory. Add -I../intl to INCLUDES. * intl.h: Include libintl.h if and only if ENABLE_NLS is defined. intl: * Makefile.in: Remove unnecessary capabilities for installation, build of shared libraries, generation of distribution tarballs, etc. Fix all the places that rely on the parent directory. Don't generate libgnuintl.h from anything; do generate $(objdir)/libintl.h from libgnuintl.h if necessary. Adjust DEFS for use of config.h. * libgnuintl.h.in: Rename libgnuintl.h. * README: New file. * config.charset, ref-add.sin, ref-del.sin: Delete (unused). * COPYING.LIB-2.0, COPYING.LIB-2.1: Delete (redundant). * aclocal.m4: New; generated per instructions in gettext manual. * configure.in: New; written from scratch for this configuration. * configure, config.h.in: Generated. contrib: * gcc_update: Remove gcc/intl/plural.c from list. Add new generated files intl/plural.c, intl/configure, intl/config.h.in. From-SVN: r68928
2003-07-05 02:18:54 +08:00
#include "plural-exp.h"
/* The main function generated by the parser is called __gettextparse,
but we want it to be called PLURAL_PARSE. */
#ifndef _LIBC
# define __gettextparse PLURAL_PARSE
#endif
intl: Unbreak intl build with bison 3 when no regeneration is needed [PR92008] As Iain reported, my change broke the case when one has bison >= 3, but make decides there is no reason to regenerate plural.c, unfortunately that seems to be a scenario I haven't tested. The problem is that the pregenerated plural.c has been generated with bison 1.35, but when config.h says HAVE_BISON3, the code assumes it is the bison3 variant. What used to work fine is when one has bison >= 3 and plural.c has been regenerated (e.g. do touch intl/plural.y and it will work), or when one doesn't have any bison (then nothing is regenerated, but HAVE_BISON3 isn't defined either), or when one has bison < 3 and doesn't need to regenerate, or when one has bison < 3 and it is regenerated. The following patch fixes this, by killing the HAVE_BISON3 macro from config.h, and instead remembering the fact whether plural.c has been created with bison < 3 or bison >= 3 in a separate new plural-config.h header. The way this works: - user doesn't have bison - user has bison >= 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y - user has bison < 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y pregenerated !USE_BISON3 plural.c and plural-config.h from source dir is used, nothing in the objdir - user has bison >= 3 and intl/plural.y is newer Makefile generates plural.c and USE_BISON3 plural-config.h in the objdir, which is then used in preference to srcdir copies - user has bison < 3 and intl/plural.y is newer Makefile generates plural.c and !USE_BISON3 plural-config.h in the objdir, which is then used in preference to srcdir copies I have tested all these cases and make all-yes worked in all the cases. If one uses the unsupported ./configure where srcdir == objdir, I guess (though haven't tested) that it should still work, just it would be nice if such people didn't try to check in the plural{.c,-config.h} they have regenerated. What doesn't work, but didn't work before either (just tested gcc-9 branch too) is when one doesn't have bison and plural.y is newer than plural.c. Don't do that ;) 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 intl/ * configure.ac: Remove HAVE_BISON3 AC_DEFINE. * Makefile.in (HEADERS): Add plural-config.h. (.y.c): Also create plural-config.h. (dcigettext.o loadmsgcat.o plural.o plural-exp.o): Also depend on plural-config.h. (plural-config.h): Depend on plural.c. * plural-exp.h: Include plural-config.h. Use USE_BISON3 instead of HAVE_BISON3. * plural.y: Use USE_BISON3 instead of HAVE_BISON3. * configure: Regenerated. * plural.c: Regenerated. * config.h.in: Regenerated. * plural-config.h: Generated. contrib/ * gcc_update: Add intl/plural.y dependency for intl/plural-config.h.
2020-04-16 17:55:00 +08:00
#ifndef USE_BISON3
#define YYLEX_PARAM &((struct parse_args *) arg)->cp
#define YYPARSE_PARAM arg
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
#endif
%}
%pure_parser
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
/* BISON3 %parse-param {struct parse_args *arg} */
/* BISON3 %lex-param {struct parse_args *arg} */
/* BISON3 %define api.pure full */
intl: New directory; see intl/ChangeLog for details. top: * intl: New directory; see intl/ChangeLog for details. * ABOUT-NLS, config.rpath: Import from gettext 0.12.1. * Makefile.tpl: all-gcc depends on maybe-all-intl. * Makefile.in: Regenerate. config: * gettext.m4: New file - copy of gettext.m4 from binutils CVS, with added AC_ISC_POSIX macro from gcc/aclocal.m4. gcc: * ABOUT-NLS: Delete. * intl: Delete entire directory. * aclocal.m4: Include ../config/gettext.m4. Delete AC_ISC_POSIX, AM_LANGINFO_CODESET, jm_GLIBC21, AM_LC_MESSAGES, AM_PATH_PROG_WITH_TEST, AM_WITH_NLS, and AM_GNU_GETTEXT. * configure.in: Use CY_GNU_GETTEXT, not AM_GNU_GETTEXT. Remove intl/Makefile from all_outputs. * configure, config.in: Regenerate. * Makefile.in: Expunge all references to intl subdirectory. Add -I../intl to INCLUDES. * intl.h: Include libintl.h if and only if ENABLE_NLS is defined. intl: * Makefile.in: Remove unnecessary capabilities for installation, build of shared libraries, generation of distribution tarballs, etc. Fix all the places that rely on the parent directory. Don't generate libgnuintl.h from anything; do generate $(objdir)/libintl.h from libgnuintl.h if necessary. Adjust DEFS for use of config.h. * libgnuintl.h.in: Rename libgnuintl.h. * README: New file. * config.charset, ref-add.sin, ref-del.sin: Delete (unused). * COPYING.LIB-2.0, COPYING.LIB-2.1: Delete (redundant). * aclocal.m4: New; generated per instructions in gettext manual. * configure.in: New; written from scratch for this configuration. * configure, config.h.in: Generated. contrib: * gcc_update: Remove gcc/intl/plural.c from list. Add new generated files intl/plural.c, intl/configure, intl/config.h.in. From-SVN: r68928
2003-07-05 02:18:54 +08:00
%expect 7
%union {
unsigned long int num;
enum operator op;
struct expression *exp;
}
%{
/* Prototypes for local functions. */
static struct expression *new_exp PARAMS ((int nargs, enum operator op,
struct expression * const *args));
static inline struct expression *new_exp_0 PARAMS ((enum operator op));
static inline struct expression *new_exp_1 PARAMS ((enum operator op,
struct expression *right));
static struct expression *new_exp_2 PARAMS ((enum operator op,
struct expression *left,
struct expression *right));
static inline struct expression *new_exp_3 PARAMS ((enum operator op,
struct expression *bexp,
struct expression *tbranch,
struct expression *fbranch));
intl: Unbreak intl build with bison 3 when no regeneration is needed [PR92008] As Iain reported, my change broke the case when one has bison >= 3, but make decides there is no reason to regenerate plural.c, unfortunately that seems to be a scenario I haven't tested. The problem is that the pregenerated plural.c has been generated with bison 1.35, but when config.h says HAVE_BISON3, the code assumes it is the bison3 variant. What used to work fine is when one has bison >= 3 and plural.c has been regenerated (e.g. do touch intl/plural.y and it will work), or when one doesn't have any bison (then nothing is regenerated, but HAVE_BISON3 isn't defined either), or when one has bison < 3 and doesn't need to regenerate, or when one has bison < 3 and it is regenerated. The following patch fixes this, by killing the HAVE_BISON3 macro from config.h, and instead remembering the fact whether plural.c has been created with bison < 3 or bison >= 3 in a separate new plural-config.h header. The way this works: - user doesn't have bison - user has bison >= 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y - user has bison < 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y pregenerated !USE_BISON3 plural.c and plural-config.h from source dir is used, nothing in the objdir - user has bison >= 3 and intl/plural.y is newer Makefile generates plural.c and USE_BISON3 plural-config.h in the objdir, which is then used in preference to srcdir copies - user has bison < 3 and intl/plural.y is newer Makefile generates plural.c and !USE_BISON3 plural-config.h in the objdir, which is then used in preference to srcdir copies I have tested all these cases and make all-yes worked in all the cases. If one uses the unsupported ./configure where srcdir == objdir, I guess (though haven't tested) that it should still work, just it would be nice if such people didn't try to check in the plural{.c,-config.h} they have regenerated. What doesn't work, but didn't work before either (just tested gcc-9 branch too) is when one doesn't have bison and plural.y is newer than plural.c. Don't do that ;) 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 intl/ * configure.ac: Remove HAVE_BISON3 AC_DEFINE. * Makefile.in (HEADERS): Add plural-config.h. (.y.c): Also create plural-config.h. (dcigettext.o loadmsgcat.o plural.o plural-exp.o): Also depend on plural-config.h. (plural-config.h): Depend on plural.c. * plural-exp.h: Include plural-config.h. Use USE_BISON3 instead of HAVE_BISON3. * plural.y: Use USE_BISON3 instead of HAVE_BISON3. * configure: Regenerated. * plural.c: Regenerated. * config.h.in: Regenerated. * plural-config.h: Generated. contrib/ * gcc_update: Add intl/plural.y dependency for intl/plural-config.h.
2020-04-16 17:55:00 +08:00
#ifdef USE_BISON3
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
static int yylex PARAMS ((YYSTYPE *lval, struct parse_args *arg));
static void yyerror PARAMS ((struct parse_args *arg, const char *str));
#else
static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
static void yyerror PARAMS ((const char *str));
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
#endif
/* Allocation of expressions. */
static struct expression *
new_exp (nargs, op, args)
int nargs;
enum operator op;
struct expression * const *args;
{
int i;
struct expression *newp;
/* If any of the argument could not be malloc'ed, just return NULL. */
for (i = nargs - 1; i >= 0; i--)
if (args[i] == NULL)
goto fail;
/* Allocate a new expression. */
newp = (struct expression *) malloc (sizeof (*newp));
if (newp != NULL)
{
newp->nargs = nargs;
newp->operation = op;
for (i = nargs - 1; i >= 0; i--)
newp->val.args[i] = args[i];
return newp;
}
fail:
for (i = nargs - 1; i >= 0; i--)
FREE_EXPRESSION (args[i]);
return NULL;
}
static inline struct expression *
new_exp_0 (op)
enum operator op;
{
return new_exp (0, op, NULL);
}
static inline struct expression *
new_exp_1 (op, right)
enum operator op;
struct expression *right;
{
struct expression *args[1];
args[0] = right;
return new_exp (1, op, args);
}
static struct expression *
new_exp_2 (op, left, right)
enum operator op;
struct expression *left;
struct expression *right;
{
struct expression *args[2];
args[0] = left;
args[1] = right;
return new_exp (2, op, args);
}
static inline struct expression *
new_exp_3 (op, bexp, tbranch, fbranch)
enum operator op;
struct expression *bexp;
struct expression *tbranch;
struct expression *fbranch;
{
struct expression *args[3];
args[0] = bexp;
args[1] = tbranch;
args[2] = fbranch;
return new_exp (3, op, args);
}
%}
/* This declares that all operators have the same associativity and the
precedence order as in C. See [Harbison, Steele: C, A Reference Manual].
There is no unary minus and no bitwise operators.
Operators with the same syntactic behaviour have been merged into a single
token, to save space in the array generated by bison. */
%right '?' /* ? */
%left '|' /* || */
%left '&' /* && */
%left EQUOP2 /* == != */
%left CMPOP2 /* < > <= >= */
%left ADDOP2 /* + - */
%left MULOP2 /* * / % */
%right '!' /* ! */
%token <op> EQUOP2 CMPOP2 ADDOP2 MULOP2
%token <num> NUMBER
%type <exp> exp
%%
start: exp
{
if ($1 == NULL)
YYABORT;
((struct parse_args *) arg)->res = $1;
}
;
exp: exp '?' exp ':' exp
{
$$ = new_exp_3 (qmop, $1, $3, $5);
}
| exp '|' exp
{
$$ = new_exp_2 (lor, $1, $3);
}
| exp '&' exp
{
$$ = new_exp_2 (land, $1, $3);
}
| exp EQUOP2 exp
{
$$ = new_exp_2 ($2, $1, $3);
}
| exp CMPOP2 exp
{
$$ = new_exp_2 ($2, $1, $3);
}
| exp ADDOP2 exp
{
$$ = new_exp_2 ($2, $1, $3);
}
| exp MULOP2 exp
{
$$ = new_exp_2 ($2, $1, $3);
}
| '!' exp
{
$$ = new_exp_1 (lnot, $2);
}
| 'n'
{
$$ = new_exp_0 (var);
}
| NUMBER
{
if (($$ = new_exp_0 (num)) != NULL)
$$->val.num = $1;
}
| '(' exp ')'
{
$$ = $2;
}
;
%%
void
internal_function
FREE_EXPRESSION (exp)
struct expression *exp;
{
if (exp == NULL)
return;
/* Handle the recursive case. */
switch (exp->nargs)
{
case 3:
FREE_EXPRESSION (exp->val.args[2]);
/* FALLTHROUGH */
case 2:
FREE_EXPRESSION (exp->val.args[1]);
/* FALLTHROUGH */
case 1:
FREE_EXPRESSION (exp->val.args[0]);
/* FALLTHROUGH */
default:
break;
}
free (exp);
}
intl: Unbreak intl build with bison 3 when no regeneration is needed [PR92008] As Iain reported, my change broke the case when one has bison >= 3, but make decides there is no reason to regenerate plural.c, unfortunately that seems to be a scenario I haven't tested. The problem is that the pregenerated plural.c has been generated with bison 1.35, but when config.h says HAVE_BISON3, the code assumes it is the bison3 variant. What used to work fine is when one has bison >= 3 and plural.c has been regenerated (e.g. do touch intl/plural.y and it will work), or when one doesn't have any bison (then nothing is regenerated, but HAVE_BISON3 isn't defined either), or when one has bison < 3 and doesn't need to regenerate, or when one has bison < 3 and it is regenerated. The following patch fixes this, by killing the HAVE_BISON3 macro from config.h, and instead remembering the fact whether plural.c has been created with bison < 3 or bison >= 3 in a separate new plural-config.h header. The way this works: - user doesn't have bison - user has bison >= 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y - user has bison < 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y pregenerated !USE_BISON3 plural.c and plural-config.h from source dir is used, nothing in the objdir - user has bison >= 3 and intl/plural.y is newer Makefile generates plural.c and USE_BISON3 plural-config.h in the objdir, which is then used in preference to srcdir copies - user has bison < 3 and intl/plural.y is newer Makefile generates plural.c and !USE_BISON3 plural-config.h in the objdir, which is then used in preference to srcdir copies I have tested all these cases and make all-yes worked in all the cases. If one uses the unsupported ./configure where srcdir == objdir, I guess (though haven't tested) that it should still work, just it would be nice if such people didn't try to check in the plural{.c,-config.h} they have regenerated. What doesn't work, but didn't work before either (just tested gcc-9 branch too) is when one doesn't have bison and plural.y is newer than plural.c. Don't do that ;) 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 intl/ * configure.ac: Remove HAVE_BISON3 AC_DEFINE. * Makefile.in (HEADERS): Add plural-config.h. (.y.c): Also create plural-config.h. (dcigettext.o loadmsgcat.o plural.o plural-exp.o): Also depend on plural-config.h. (plural-config.h): Depend on plural.c. * plural-exp.h: Include plural-config.h. Use USE_BISON3 instead of HAVE_BISON3. * plural.y: Use USE_BISON3 instead of HAVE_BISON3. * configure: Regenerated. * plural.c: Regenerated. * config.h.in: Regenerated. * plural-config.h: Generated. contrib/ * gcc_update: Add intl/plural.y dependency for intl/plural-config.h.
2020-04-16 17:55:00 +08:00
#ifdef USE_BISON3
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
static int
yylex (lval, arg)
YYSTYPE *lval;
struct parse_args *arg;
{
const char **pexp = &arg->cp;
#else
static int
yylex (lval, pexp)
YYSTYPE *lval;
const char **pexp;
{
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
#endif
const char *exp = *pexp;
int result;
while (1)
{
if (exp[0] == '\0')
{
*pexp = exp;
return YYEOF;
}
if (exp[0] != ' ' && exp[0] != '\t')
break;
++exp;
}
result = *exp++;
switch (result)
{
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
{
unsigned long int n = result - '0';
while (exp[0] >= '0' && exp[0] <= '9')
{
n *= 10;
n += exp[0] - '0';
++exp;
}
lval->num = n;
result = NUMBER;
}
break;
case '=':
if (exp[0] == '=')
{
++exp;
lval->op = equal;
result = EQUOP2;
}
else
result = YYERRCODE;
break;
case '!':
if (exp[0] == '=')
{
++exp;
lval->op = not_equal;
result = EQUOP2;
}
break;
case '&':
case '|':
if (exp[0] == result)
++exp;
else
result = YYERRCODE;
break;
case '<':
if (exp[0] == '=')
{
++exp;
lval->op = less_or_equal;
}
else
lval->op = less_than;
result = CMPOP2;
break;
case '>':
if (exp[0] == '=')
{
++exp;
lval->op = greater_or_equal;
}
else
lval->op = greater_than;
result = CMPOP2;
break;
case '*':
lval->op = mult;
result = MULOP2;
break;
case '/':
lval->op = divide;
result = MULOP2;
break;
case '%':
lval->op = module;
result = MULOP2;
break;
case '+':
lval->op = plus;
result = ADDOP2;
break;
case '-':
lval->op = minus;
result = ADDOP2;
break;
case 'n':
case '?':
case ':':
case '(':
case ')':
/* Nothing, just return the character. */
break;
case ';':
case '\n':
case '\0':
/* Be safe and let the user call this function again. */
--exp;
result = YYEOF;
break;
default:
result = YYERRCODE;
#if YYDEBUG != 0
--exp;
#endif
break;
}
*pexp = exp;
return result;
}
intl: Unbreak intl build with bison 3 when no regeneration is needed [PR92008] As Iain reported, my change broke the case when one has bison >= 3, but make decides there is no reason to regenerate plural.c, unfortunately that seems to be a scenario I haven't tested. The problem is that the pregenerated plural.c has been generated with bison 1.35, but when config.h says HAVE_BISON3, the code assumes it is the bison3 variant. What used to work fine is when one has bison >= 3 and plural.c has been regenerated (e.g. do touch intl/plural.y and it will work), or when one doesn't have any bison (then nothing is regenerated, but HAVE_BISON3 isn't defined either), or when one has bison < 3 and doesn't need to regenerate, or when one has bison < 3 and it is regenerated. The following patch fixes this, by killing the HAVE_BISON3 macro from config.h, and instead remembering the fact whether plural.c has been created with bison < 3 or bison >= 3 in a separate new plural-config.h header. The way this works: - user doesn't have bison - user has bison >= 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y - user has bison < 3, but intl/{plural-config.h,plural.c} aren't older than intl/plural.y pregenerated !USE_BISON3 plural.c and plural-config.h from source dir is used, nothing in the objdir - user has bison >= 3 and intl/plural.y is newer Makefile generates plural.c and USE_BISON3 plural-config.h in the objdir, which is then used in preference to srcdir copies - user has bison < 3 and intl/plural.y is newer Makefile generates plural.c and !USE_BISON3 plural-config.h in the objdir, which is then used in preference to srcdir copies I have tested all these cases and make all-yes worked in all the cases. If one uses the unsupported ./configure where srcdir == objdir, I guess (though haven't tested) that it should still work, just it would be nice if such people didn't try to check in the plural{.c,-config.h} they have regenerated. What doesn't work, but didn't work before either (just tested gcc-9 branch too) is when one doesn't have bison and plural.y is newer than plural.c. Don't do that ;) 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 intl/ * configure.ac: Remove HAVE_BISON3 AC_DEFINE. * Makefile.in (HEADERS): Add plural-config.h. (.y.c): Also create plural-config.h. (dcigettext.o loadmsgcat.o plural.o plural-exp.o): Also depend on plural-config.h. (plural-config.h): Depend on plural.c. * plural-exp.h: Include plural-config.h. Use USE_BISON3 instead of HAVE_BISON3. * plural.y: Use USE_BISON3 instead of HAVE_BISON3. * configure: Regenerated. * plural.c: Regenerated. * config.h.in: Regenerated. * plural-config.h: Generated. contrib/ * gcc_update: Add intl/plural.y dependency for intl/plural-config.h.
2020-04-16 17:55:00 +08:00
#ifdef USE_BISON3
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
static void
yyerror (arg, str)
struct parse_args *arg;
#else
static void
yyerror (str)
intl: Allow building both with old bison and bison >= 3 [PR92008] bison 3 apparently made a backwards incompatible change, dropped YYLEX_PARAM/YYPARSE_PARAM support and instead needs %param or %lex-param and %parse-param. Furthermore, there is no easy way to conditionalize on bison version in the *.y files. While e.g. glibc bumped bison requirement and just has the bison 3 compatible version, Richi said there are still systems with older bison where we want to build gcc. So, this patch instead determines during configure bison version, and depending on that when building plural.c (if building it at all) tweaks what is passed over to bison if needed. Tested with both bison 3 and bison 1.35, in each case with reconfiguring intl and building with make all-yes (as in my setup intl isn't normally used). 2020-04-16 Jakub Jelinek <jakub@redhat.com> PR bootstrap/92008 * configure.ac: Add check for bison >= 3, AC_DEFINE HAVE_BISON3 and AC_SUBST BISON3_YES and BISON3_NO. * Makefile.in (.y.c): Prefix $(YACC) invocation with @BISON3_NO@, add @BISON3_YES@ prefixed rule to adjust the *.y source using sed and adjust output afterwards. * plural-exp.h (PLURAL_PARSE): If HAVE_BISON3 is defined, use struct parse_args * type for arg instead of void *. * plural.y: Add magic /* BISON3 ... */ comments with bison >= 3 directives. (YYLEX_PARAM, YYPARSE_PARAM): Don't define if HAVE_BISON3 is defined. (yylex, yyerror): Adjust prototypes and definitions if HAVE_BISON3 is defined. * plural.c: Regenerated. * config.h.in: Regenerated. * configure: Regenerated.
2020-04-16 16:12:30 +08:00
#endif
intl: New directory; see intl/ChangeLog for details. top: * intl: New directory; see intl/ChangeLog for details. * ABOUT-NLS, config.rpath: Import from gettext 0.12.1. * Makefile.tpl: all-gcc depends on maybe-all-intl. * Makefile.in: Regenerate. config: * gettext.m4: New file - copy of gettext.m4 from binutils CVS, with added AC_ISC_POSIX macro from gcc/aclocal.m4. gcc: * ABOUT-NLS: Delete. * intl: Delete entire directory. * aclocal.m4: Include ../config/gettext.m4. Delete AC_ISC_POSIX, AM_LANGINFO_CODESET, jm_GLIBC21, AM_LC_MESSAGES, AM_PATH_PROG_WITH_TEST, AM_WITH_NLS, and AM_GNU_GETTEXT. * configure.in: Use CY_GNU_GETTEXT, not AM_GNU_GETTEXT. Remove intl/Makefile from all_outputs. * configure, config.in: Regenerate. * Makefile.in: Expunge all references to intl subdirectory. Add -I../intl to INCLUDES. * intl.h: Include libintl.h if and only if ENABLE_NLS is defined. intl: * Makefile.in: Remove unnecessary capabilities for installation, build of shared libraries, generation of distribution tarballs, etc. Fix all the places that rely on the parent directory. Don't generate libgnuintl.h from anything; do generate $(objdir)/libintl.h from libgnuintl.h if necessary. Adjust DEFS for use of config.h. * libgnuintl.h.in: Rename libgnuintl.h. * README: New file. * config.charset, ref-add.sin, ref-del.sin: Delete (unused). * COPYING.LIB-2.0, COPYING.LIB-2.1: Delete (redundant). * aclocal.m4: New; generated per instructions in gettext manual. * configure.in: New; written from scratch for this configuration. * configure, config.h.in: Generated. contrib: * gcc_update: Remove gcc/intl/plural.c from list. Add new generated files intl/plural.c, intl/configure, intl/config.h.in. From-SVN: r68928
2003-07-05 02:18:54 +08:00
const char *str;
{
/* Do nothing. We don't print error messages here. */
}