cpython/Doc/whatsnew/3.4.rst

1618 lines
61 KiB
ReStructuredText

****************************
What's New In Python 3.4
****************************
.. :Author: Someone <email>
(uncomment if there is a principal author)
.. Rules for maintenance:
* Anyone can add text to this document, but the maintainer reserves the
right to rewrite any additions. In particular, for obscure or esoteric
features, the maintainer may reduce any addition to a simple reference to
the new documentation rather than explaining the feature inline.
* While the maintainer will periodically go through Misc/NEWS
and add changes, it's best not to rely on this. We know from experience
that any changes that aren't in the What's New documentation around the
time of the original release will remain largely unknown to the community
for years, even if they're added later. We also know from experience that
other priorities can arise, and the maintainer will run out of time to do
updates -- in such cases, end users will be much better served by partial
notifications that at least give a hint about new features to
investigate.
* This is not a complete list of every single change; completeness
is the purpose of Misc/NEWS. The What's New should focus on changes that
are visible to Python *users* and that *require* a feature release (i.e.
most bug fixes should only be recorded in Misc/NEWS)
* PEPs should not be marked Final until they have an entry in What's New.
A placeholder entry that is just a section header and a link to the PEP
(e.g ":pep:`397` has been implemented") is acceptable. If a PEP has been
implemented and noted in What's New, don't forget to mark it as Final!
* If you want to draw your new text to the attention of the
maintainer, add 'XXX' to the beginning of the paragraph or
section.
* It's OK to add just a very brief note about a change. For
example: "The :ref:`~socket.transmogrify()` function was added to the
:mod:`socket` module." The maintainer will research the change and
write the necessary text (if appropriate). The advantage of doing this
is that even if no more descriptive text is ever added, readers will at
least have a notification that the new feature exists and a link to the
relevant documentation.
* You can comment out your additions if you like, but it's not
necessary (especially when a final release is some months away).
* Credit the author of a patch or bugfix. Just the name is
sufficient; the e-mail address isn't necessary.
* It's helpful to add the bug/patch number as a comment:
The :ref:`~socket.transmogrify()` function was added to the
:mod:`socket` module. (Contributed by P.Y. Developer in :issue:`12345`.)
This saves the maintainer the effort of going through the Mercurial log
when researching a change.
* Cross referencing tip: :ref:`mod.attr` will display as ``mod.attr``,
while :ref:`~mod.attr` will display as ``attr``.
This article explains the new features in Python 3.4, compared to 3.3.
.. Python 3.4 was released on TBD.
For full details, see the
`changelog <http://docs.python.org/3.4/whatsnew/changelog.html>`_.
.. note:: Prerelease users should be aware that this document is currently in
draft form. It will be updated substantially as Python 3.4 moves towards
release, so it's worth checking back even after reading earlier versions.
.. seealso::
:pep:`429` -- Python 3.4 Release Schedule
Summary -- Release Highlights
=============================
.. This section singles out the most important changes in Python 3.4.
Brevity is key.
New syntax features:
* No new syntax features were added in Python 3.4.
New expected features for Python implementations:
* :ref:`pip should always be "available" <whatsnew-pep-453>` (:pep:`453`).
* :ref:`Make newly created file descriptors non-inheritable <whatsnew-pep-446>`
(:pep:`446`).
* command line option for :ref:`isolated mode <using-on-misc-options>`,
(:issue:`16499`).
* :ref:`improvements in the handling of codecs <codec-handling-improvements>`
that are not text encodings (multiple issues).
* :ref:`A ModuleSpec Type <whatsnew-pep-451>` for the Import System
(:pep:`451`). (Affects importer authors.)
New library modules:
* :mod:`asyncio`: :ref:`New provisional API for asynchronous IO
<whatsnew-asyncio>` (:pep:`3156`).
* :mod:`ensurepip`: :ref:`Bootstrapping the pip installer <whatsnew-ensurepip>`
(:pep:`453`).
* :mod:`enum`: :ref:`Support for enumeration types <whatsnew-enum>`
(:pep:`435`).
* :mod:`pathlib`: :ref:`Object-oriented filesystem paths <whatsnew-pathlib>`
(:pep:`428`).
* :mod:`selectors`: :ref:`High-level and efficient I/O multiplexing
<whatsnew-selectors>`, built upon the :mod:`select` module primitives (part
of :pep:`3156`).
* :mod:`statistics`: A basic :ref:`numerically stable statistics library
<whatsnew-statistics>` (:pep:`450`).
* :mod:`tracemalloc`: :ref:`Trace Python memory allocations
<whatsnew-tracemalloc>` (:pep:`454`).
Significantly Improved Library Modules:
* :ref:`Single-dispatch generic functions <whatsnew-singledispatch>` in
:mod:`functools` (:pep:`443`).
* New :mod:`pickle` :ref:`protocol 4 <whatsnew-protocol-4>` (:pep:`3154`).
* :ref:`TLSv1.1 and TLSv1.2 support <whatsnew-tls-11-12>` for :mod:`ssl`
(:issue:`16692`).
* :mod:`multiprocessing` now has :ref:`an option to avoid using os.fork
on Unix <whatsnew-multiprocessing-no-fork>` (:issue:`8713`).
* :mod:`email` has a new submodule, :mod:`~email.contentmanager`, and
a new :mod:`~email.message.Message` subclass
(:class:`~email.contentmanager.EmailMessage`) that :ref:`simplify MIME
handling <whatsnew_email_contentmanager>` (:issue:`18891`).
* :mod:`plistlib` has a cleaned up interface and support for binary
plist files (:issue:`14455`)
CPython implementation improvements:
* :ref:`Safe object finalization <whatsnew-pep-442>` (:pep:`442`).
* Leveraging :pep:`442`, :ref:`module globals are no longer set to None
during finalization <whatsnew-pep-442>`, in most cases (:issue:`18214`).
* :ref:`Configurable memory allocators <whatsnew-pep-445>` (:pep:`445`).
* :ref:`Secure and interchangeable hash algorithm <whatsnew-pep-456>`
(:pep:`456`).
* :ref:`Argument Clinic <whatsnew-pep-436>` (:pep:`436`).
* The :mod:`marshal` format has been made :ref:`more compact and efficient
<whatsnew-marshal-3>` (:issue:`16475`).
Please read on for a comprehensive list of user-facing changes, including many
other smaller improvements, CPython optimizations, deprecations, and potential
porting issues.
New Expected Features for Python Implementations
================================================
.. _whatsnew-pep-453:
PEP 453: Explicit Bootstrapping of PIP in Python Installations
--------------------------------------------------------------
The new :mod:`ensurepip` module (defined in :pep:`453`) provides a standard
cross-platform mechanism to boostrap the pip installer into Python
installations and virtual environments.
The :mod:`venv` module and the :command:`pyvenv` utility make use of this
module to make ``pip`` readily available in virtual environments. When
using the command line interface, ``pip`` is installed by default, while
for the module API installation of ``pip`` must be requested explicitly.
For CPython source builds on POSIX systems, the ``make install`` and
``make altinstall`` commands bootstrap ``pip`` by default. This behaviour
can be controlled through configure options, and overridden through
Makefile options.
On Windows and Mac OS X, the CPython installers now offer the option to
install ``pip`` along with CPython itself.
As `discussed in the PEP`__, platform packagers may choose not to install
``pip`` by default, as long as the command ``pip``, when invoked, provides
clear and simple directions on how to install ``pip`` on the platform.
__ http://www.python.org/dev/peps/pep-0453/#recommendations-for-downstream-distributors
.. note::
The implementation of PEP 453 is still a work in progress. Refer to
:issue:`19347` for the progress on additional steps:
* Having the binary installers install ``pip`` by default
* Recommending the use of ``pip`` in the "Installing Python Module"
documentation.
.. seealso::
:pep:`453` -- Explicit bootstrapping of pip in Python installations
PEP written by Donald Stufft and Nick Coghlan, implemented by
Donald Stufft, Nick Coghlan, Martin von Löwis and Ned Deily.
.. _whatsnew-pep-446:
PEP 446: Make Newly Created File Descriptors Non-Inheritable
------------------------------------------------------------
:pep:`446` makes newly created file descriptors :ref:`non-inheritable
<fd_inheritance>`. New functions and methods:
* :func:`os.get_inheritable`, :func:`os.set_inheritable`
* :func:`os.get_handle_inheritable`, :func:`os.set_handle_inheritable`
* :meth:`socket.socket.get_inheritable`, :meth:`socket.socket.set_inheritable`
.. seealso::
:pep:`446` -- Make newly created file descriptors non-inheritable
PEP written and implemented by Victor Stinner.
.. _codec-handling-improvements:
Improvements to Codec Handling
------------------------------
Since it was first introduced, the :mod:`codecs` module has always been
intended to operate as a type-neutral dynamic encoding and decoding
system. However, its close coupling with the Python text model, especially
the type restricted convenience methods on the builtin :class:`str`,
:class:`bytes` and :class:`bytearray` types, has historically obscured that
fact.
As a key step in clarifying the situation, the :meth:`codecs.encode` and
:meth:`codecs.decode` convenience functions are now properly documented in
Python 2.7, 3.3 and 3.4. These functions have existed in the :mod:`codecs`
module (and have been covered by the regression test suite) since Python 2.4,
but were previously only discoverable through runtime introspection.
Unlike the convenience methods on :class:`str`, :class:`bytes` and
:class:`bytearray`, these convenience functions support arbitrary codecs
in both Python 2 and Python 3, rather than being limited to Unicode text
encodings (in Python 3) or ``basestring`` <-> ``basestring`` conversions
(in Python 2).
In Python 3.4, the interpreter is able to identify the known non-text
encodings provided in the standard library and direct users towards these
general purpose convenience functions when appropriate::
>>> b"abcdef".decode("hex")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
LookupError: 'hex' is not a text encoding; use codecs.decode() to handle arbitrary codecs
>>> "hello".encode("rot13")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
LookupError: 'rot13' is not a text encoding; use codecs.encode() to handle arbitrary codecs
In a related change, whenever it is feasible without breaking backwards
compatibility, exceptions raised during encoding and decoding operations
will be wrapped in a chained exception of the same type that mentions the
name of the codec responsible for producing the error::
>>> import codecs
>>> codecs.decode(b"abcdefgh", "hex")
Traceback (most recent call last):
File "/usr/lib/python3.4/encodings/hex_codec.py", line 20, in hex_decode
return (binascii.a2b_hex(input), len(input))
binascii.Error: Non-hexadecimal digit found
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
binascii.Error: decoding with 'hex' codec failed (Error: Non-hexadecimal digit found)
>>> codecs.encode("hello", "bz2")
Traceback (most recent call last):
File "/usr/lib/python3.4/encodings/bz2_codec.py", line 17, in bz2_encode
return (bz2.compress(input), len(input))
File "/usr/lib/python3.4/bz2.py", line 498, in compress
return comp.compress(data) + comp.flush()
TypeError: 'str' does not support the buffer interface
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: encoding with 'bz2' codec failed (TypeError: 'str' does not support the buffer interface)
Finally, as the examples above show, these improvements have permitted
the restoration of the convenience aliases for the non-Unicode codecs that
were themselves restored in Python 3.2. This means that encoding binary data
to and from its hexadecimal representation (for example) can now be written
as::
>>> from codecs import encode, decode
>>> encode(b"hello", "hex")
b'68656c6c6f'
>>> decode(b"68656c6c6f", "hex")
b'hello'
The binary and text transforms provided in the standard library are detailed
in :ref:`binary-transforms` and :ref:`text-transforms`.
(Contributed by Nick Coghlan in :issue:`7475`, , :issue:`17827`,
:issue:`17828` and :issue:`19619`)
.. _whatsnew-pep-451:
PEP 451: A ModuleSpec Type for the Import System
------------------------------------------------
:pep:`451` provides an encapsulation of the information about a module that the
import machinery will use to load it (that is, a module specification). This
helps simplify both the import implementation and several import-related APIs.
The change is also a stepping stone for `several future import-related
improvements`__.
__ https://mail.python.org/pipermail/python-dev/2013-November/130111.html
The public-facing changes from the PEP are entirely backward-compatible.
Furthermore, they should be transparent to everyone but importer authors. Key
finder and loader methods have been deprecated, but they will continue working.
New importers should use the new methods described in the PEP. Existing
importers should be updated to implement the new methods.
Other Language Changes
----------------------
Some smaller changes made to the core Python language are:
* Unicode database updated to UCD version 6.3.
* :func:`min` and :func:`max` now accept a *default* argument that can be used
to specify the value they return if the iterable they are evaluating has no
elements. Contributed by Julian Berman in :issue:`18111`.
* Module objects are now :mod:`weakref`'able.
* Module ``__file__`` attributes (and related values) should now always
contain absolute paths by default, with the sole exception of
``__main__.__file__`` when a script has been executed directly using
a relative path (Contributed by Brett Cannon in :issue:`18416`).
* Now all the UTF-\* codecs (except UTF-7) reject surrogates during both
encoding and decoding unless the ``surrogatepass`` error handler is used,
with the exception of the UTF-16 decoder that accepts valid surrogate pairs,
and the UTF-16 encoder that produces them while encoding non-BMP characters.
Contributed by Victor Stinner, Kang-Hao (Kenny) Lu and Serhiy Storchaka in
:issue:`12892`.
New Modules
===========
.. _whatsnew-asyncio:
asyncio
-------
The new :mod:`asyncio` module (defined in :pep:`3156`) provides a standard
pluggable event loop model for Python, providing solid asynchronous IO
support in the standard library, and making it easier for other event loop
implementations to interoperate with the standard library and each other.
For Python 3.4, this module is considered a :term:`provisional API`.
.. seealso::
:pep:`3156` -- Asynchronous IO Support Rebooted: the "asyncio" Module
PEP written and implementation led by Guido van Rossum.
.. _whatsnew-ensurepip:
ensurepip
---------
The new :mod:`ensurepip` module is the primary infrastructure for the
:pep:`453` implementation. In the normal course of events end users will not
need to interact with this module, but it can be used to manually bootstrap
``pip`` if the automated bootstrapping into an installation or virtual
environment was declined.
:mod:`ensurepip` includes a bundled copy of ``pip``, up-to-date as of the first
release candidate of the release of CPython with which it ships (this applies
to both maintenance releases and feature releases). ``ensurepip`` does not
access the internet. (If the installation has Internet access, it is of course
possible to upgrade ``pip`` to a release more recent than the bundled ``pip``
by using the bundled ``pip`` command itself once it is installed.)
The module is named *ensure*\ pip because if called when ``pip`` is already
installed, it does nothing. It also has an ``--upgrade`` option that will
cause it to install the bundled copy of ``pip`` if the existing installed
version of ``pip`` is older than the bundled copy.
.. _whatsnew-enum:
enum
----
The new :mod:`enum` module (defined in :pep:`435`) provides a standard
implementation of enumeration types, allowing other modules (such as
:mod:`socket`) to provide more informative error messages and better
debugging support by replacing opaque integer constants with backwards
compatible enumeration values.
.. seealso::
:pep:`435` -- Adding an Enum type to the Python standard library
PEP written by Barry Warsaw, Eli Bendersky and Ethan Furman,
implemented by Ethan Furman.
.. _whatsnew-pathlib:
pathlib
-------
The new :mod:`pathlib` module offers classes representing filesystem paths
with semantics appropriate for different operating systems. Path classes are
divided between *pure paths*, which provide purely computational operations
without I/O, and *concrete paths*, which inherit from pure paths but also
provide I/O operations.
For Python 3.4, this module is considered a :term:`provisional API`.
.. seealso::
:pep:`428` -- The pathlib module -- object-oriented filesystem paths
PEP written and implemented by Antoine Pitrou.
.. _whatsnew-selectors:
selectors
---------
The new :mod:`selectors` module (created as part of implementing :pep:`3156`)
allows high-level and efficient I/O multiplexing, built upon the
:mod:`select` module primitives.
.. _whatsnew-statistics:
statistics
----------
The new :mod:`statistics` module (defined in :pep:`450`) offers some core
statistics functionality directly in the standard library. This module
supports calculation of the mean, median, mode, variance and standard
deviation of a data series.
.. seealso::
:pep:`450` -- Adding A Statistics Module To The Standard Library
PEP written and implemented by Steven D'Aprano
.. _whatsnew-tracemalloc:
tracemalloc
-----------
The new :mod:`tracemalloc` module (defined in :pep:`454`) is a debug tool to
trace memory blocks allocated by Python. It provides the following information:
* Traceback where an object was allocated
* Statistics on allocated memory blocks per filename and per line number:
total size, number and average size of allocated memory blocks
* Compute the differences between two snapshots to detect memory leaks
.. seealso::
:pep:`454` -- Add a new tracemalloc module to trace Python memory allocations
PEP written and implemented by Victor Stinner
Improved Modules
================
abc
---
New function :func:`abc.get_cache_token` can be used to know when to invalidate
caches that are affected by changes in the object graph. (Contributed
by Łukasz Langa in :issue:`16832`.)
New class :class:`~abc.ABC` has :class:`~abc.ABCMeta` as its meta class.
Using ``ABC`` as a base class has essentially the same effect as specifying
``metaclass=abc.ABCMeta``, but is simpler to type and easier to read.
(Contributed by Bruno Dupuis in :issue:`16049`.)
aifc
----
The :meth:`~aifc.getparams` method now returns a namedtuple rather than a
plain tuple. (Contributed by Claudiu Popa in :issue:`17818`.)
:func:`aifc.open` now supports the context manager protocol: when used in a
:keyword:`with` block, the :meth:`~aifc.aifc.close` method of the returned
object will be called automatically at the end of the block. (Contributed by
Serhiy Storchacha in :issue:`16486`.)
argparse
--------
The :class:`~argparse.FileType` class now accepts *encoding* and
*errors* arguments, which are passed through to :func:`open`. (Contributed
by Lucas Maystre in :issue:`11175`.)
audioop
-------
Added support for 24-bit samples (:issue:`12866`).
Added the :func:`~audioop.byteswap` function to convert big-endian samples
to little-endian and vice versa (:issue:`19641`).
base64
------
The encoding and decoding functions in :mod:`base64` now accept any
:term:`bytes-like object` in cases where it previously required a
:class:`bytes` or :class:`bytearray` instance (:issue:`17839`).
colorsys
--------
The number of digits in the coefficients for the RGB --- YIQ conversions have
been expanded so that they match the FCC NTSC versions. The change in
results should be less than 1% and may better match results found elsewhere.
contextlib
----------
The new :class:`contextlib.suppress` context manager helps to clarify the
intent of code that deliberately suppresses exceptions from a single
statement. (Contributed by Raymond Hettinger in :issue:`15806` and
Zero Piraeus in :issue:`19266`)
The new :func:`contextlib.redirect_stdout` context manager makes it easier
for utility scripts to handle inflexible APIs that don't provide any
options to retrieve their output as a string or direct it to somewhere
other than :data:`sys.stdout`. In conjunction with :class:`io.StringIO`,
this context manager is also useful for checking expected output from
command line utilities. (Contribute by Raymond Hettinger in :issue:`15805`)
The :mod:`contextlib` documentation has also been updated to include a
:ref:`discussion <single-use-reusable-and-reentrant-cms>` of the
differences between single use, reusable and reentrant context managers.
dis
---
Functions :func:`~dis.show_code`, :func:`~dis.dis`, :func:`~dis.distb`, and
:func:`~dis.disassemble` now accept a keyword-only *file* argument that
controls where they write their output.
The :mod:`dis` module is now built around an :class:`~dis.Instruction` class
that provides object oriented access to the details of each individual bytecode
operation.
A new method, :func:`~dis.get_instructions`, provides an iterator that emits
the Instruction stream for a given piece of Python code. Thus it is now
possible to write a program that inspects and manipulates a bytecode
object in ways different from those provided by the :mod:`~dis` module
itself. For example::
>>> import dis
>>> for instr in dis.get_instructions(lambda x: x + 1):
... print(instr.opname)
LOAD_FAST
LOAD_CONST
BINARY_ADD
RETURN_VALUE
The various display tools in the :mod:`dis` module have been rewritten to use
these new components.
In addition, a new application-friendly class :class:`~dis.Bytecode` provides
an object-oriented API for inspecting bytecode in both in human-readable form
and for iterating over instructions. The :class:`~dis.Bytecode` constructor
takes the same arguments that :func:`~dis.get_instruction` does (plus an
optional *current_offset*), and the resulting object can be iterated to produce
:class:`~dis.Instruction` objects. But it also has a :mod:`~dis.Bytecode.dis`
method, equivalent to calling :mod:`~dis.dis` on the constructor argument, but
returned as a multi-line string::
>>> bytecode = dis.Bytecode(lambda x: x +1, current_offset=3)
>>> for instr in bytecode:
... print('{} ({})'.format(instr.opname, instr.opcode))
LOAD_FAST (124)
LOAD_CONST (100)
BINARY_ADD (23)
RETURN_VALUE (83)
>>> bytecode.dis().splitlines() # doctest: +NORMALIZE_WHITESPACE
[' 1 0 LOAD_FAST 0 (x)',
' --> 3 LOAD_CONST 1 (1)',
' 6 BINARY_ADD',
' 7 RETURN_VALUE']
:class:`~dis.Bytecode` also has a class method,
:meth:`~dis.Bytecode.from_traceback`, that provides the ability to manipulate a
traceback (that is, ``print(Bytecode.from_traceback(tb).dis())`` is equivalent
to ``distb(tb)``).
(Contributed by Nick Coghlan, Ryan Kelly and Thomas Kluyver in :issue:`11816`
and Claudiu Popa in :issue:`17916`)
doctest
-------
A new :ref:`option flag <doctest-options>`, :data:`~doctest.FAIL_FAST`, halts
test running as soon as the first failure is detected. (Contributed by R.
David Murray and Daniel Urban in :issue:`16522`.)
The :mod:`doctest` command line interface now uses :mod:`argparse`, and has two
new options, ``-o`` and ``-f``. ``-o`` allows :ref:`doctest options
<doctest-options>` to be specified on the command line, and ``-f`` is a
shorthand for ``-o FAIL_FAST`` (to parallel the similar option supported by the
:mod:`unittest` CLI). (Contributed by R. David Murray in :issue:`11390`.)
email
-----
:meth:`~email.message.Message.as_string` now accepts a *policy* argument to
override the default policy of the message when generating a string
representation of it. This means that ``as_string`` can now be used in more
circumstances, instead of having to create and use a :mod:`~email.generator` in
order to pass formatting parameters to its ``flatten`` method.
New method :meth:`~email.message.Message.as_bytes` added to produce a bytes
representation of the message in a fashion similar to how ``as_string``
produces a string representation. It does not accept the *maxheaderlen*
argument, but does accept the *unixfrom* and *policy* arguments. The
:class:`~email.message.Message` :meth:`~email.message.Message.__bytes__` method
calls it, meaning that ``bytes(mymsg)`` will now produce the intuitive
result: a bytes object containing the fully formatted message.
(Contributed by R. David Murray in :issue:`18600`.)
.. _whatsnew_email_contentmanager:
A pair of new subclasses of :class:`~email.message.Message` have been added,
along with a new sub-module, :mod:`~email.contentmanager`. All documentation
is currently in the new module, which is being added as part of the new
:term:`provisional <provisional package>` email API. These classes provide a
number of new methods that make extracting content from and inserting content
into email messages much easier. See the :mod:`~email.contentmanager`
documentation for details.
These API additions complete the bulk of the work that was planned as part of
the email6 project. The currently provisional API is scheduled to become final
in Python 3.5 (possibly with a few minor additions in the area of error
handling).
(Contributed by R. David Murray in :issue:`18891`.)
functools
---------
The new :func:`~functools.partialmethod` descriptor bring partial argument
application to descriptors, just as :func:`~functools.partial` provides
for normal callables. The new descriptor also makes it easier to get
arbitrary callables (including :func:`~functools.partial` instances)
to behave like normal instance methods when included in a class definition.
(Contributed by Alon Horev and Nick Coghlan in :issue:`4331`)
.. _whatsnew-singledispatch:
The new :func:`~functools.singledispatch` decorator brings support for
single-dispatch generic functions to the Python standard library. Where
object oriented programming focuses on grouping multiple operations on a
common set of data into a class, a generic function focuses on grouping
multiple implementations of an operation that allows it to work with
*different* kinds of data.
.. seealso::
:pep:`443` -- Single-dispatch generic functions
PEP written and implemented by Łukasz Langa.
A pure-python version of the :func:`~functools.partial` function is now in the
stdlib; in CPython it is overridden by the C accelerated version, but it is
available for other implementations to use. (Contributed by Brian Thorne in
:issue:`12428`.)
gc
--
New function :func:`~gc.get_stats` returns a list of three per-generation
dictionaries containing the collections statistics since interpreter startup.
(Contributed by Antoine Pitrou in :issue:`16351`.)
hashlib
-------
New :func:`hashlib.pbkdf2_hmac` function.
(Contributed by Christian Heimes in :issue:`18582`)
html
----
Added a new :func:`html.unescape` function that converts HTML5 character
references to the corresponding Unicode characters.
(Contributed by Ezio Melotti in :issue:`2927`)
Added a new *convert_charrefs* keyword argument to
:class:`~html.parser.HTMLParser` that, when ``True``, automatically converts
all character references. For backward-compatibility, its value defaults
to ``False``, but it will change to ``True`` in future versions, so you
are invited to set it explicitly and update your code to use this new feature.
(Contributed by Ezio Melotti in :issue:`13633`)
The *strict* argument of :class:`~html.parser.HTMLParser` is now deprecated.
(Contributed by Ezio Melotti in :issue:`15114`)
http
----
:meth:`~http.server.BaseHTTPRequestHandler.send_error` now accepts an
optional additional *explain* parameter which can be used to provide an
extended error description, overriding the hardcoded default if there is one.
This extended error description will be formatted using the
:attr:`~http.server.HTTP.error_message_format` attribute and sent as the body
of the error response. (Contributed by Karl Cow in :issue:`12921`.)
importlib
---------
The :class:`~importlib.abc.InspectLoader` ABC defines a new method,
:meth:`~importlib.abc.InspectLoader.source_to_code` that accepts source
data and a path and returns a code object. The default implementation
is equivalent to ``compile(data, path, 'exec', dont_inherit=True)``.
(Contributed by Eric Snow and Brett Cannon in :issue:`15627`.)
:class:`~importlib.abc.InspectLoader` also now has a default implementation
for the :meth:`~importlib.abc.InspectLoader.get_code` method. However,
it will normally be desirable to override the default implementation
for performance reasons. (Contributed by Brett Cannon in :issue:`18072`.)
inspect
-------
The inspect module now offers a basic :ref:`command line interface
<inspect-module-cli>` to quickly display source code and other
information for modules, classes and functions. (Contributed by Claudiu Popa
and Nick Coghlan in :issue:`18626`)
:func:`~inspect.unwrap` makes it easy to unravel wrapper function chains
created by :func:`functools.wraps` (and any other API that sets the
``__wrapped__`` attribute on a wrapper function). (Contributed by
Daniel Urban, Aaron Iles and Nick Coghlan in :issue:`13266`)
As part of the implementation of the new :mod:`enum` module, the
:mod:`inspect` module now has substantially better support for custom
``__dir__`` methods and dynamic class attributes provided through
metaclasses (Contributed by Ethan Furman in :issue:`18929` and
:issue:`19030`)
logging
-------
The :class:`~logging.handlers.TimedRotatingFileHandler` has a new *atTime*
parameter that can be used to specify the time of day when rollover should
happen. (Contributed by Ronald Oussoren in :issue:`9556`.)
.. _whatsnew-marshal-3:
marshal
-------
The default :mod:`marshal` version has been bumped to 3. The code implementing
the new version restores the Python2 behavior of recording only one copy of
interned strings and preserving the interning on deserialization, and extends
this "one copy" ability to any object type (including handling recursive
references). This reduces both the size of ``.pyc`` files and the amount of
memory a module occupies in memory when it is loaded from a ``.pyc`` (or
``.pyo``) file. (Contributed by Kristján Valur Jónsson in :issue:`16475`.)
mmap
----
mmap objects can now be weakref'ed.
(Contributed by Valerie Lambert in :issue:`4885`.)
mock
----
:mod:`~unittest.mock` objects now inspect their specification signatures when
matching calls, which means an argument can now be matched by either position
or name, instead of only by position. (Contributed by Antoine Pitrou in
:issue:`17015`.)
:func:`~mock.mock_open` objects now have ``readline`` and ``readlines``
methods. (Contributed by Toshio Kuratomi in :issue:`17467`.)
multiprocessing
---------------
.. _whatsnew-multiprocessing-no-fork:
On Unix, two new :ref:`start methods <multiprocessing-start-methods>`
(``spawn`` and ``forkserver``) have been added for starting processes using
:mod:`multiprocessing`. These make the mixing of processes with threads more
robust, and the ``spawn`` method matches the semantics that multiprocessing has
always used on Windows. (Contributed by Richard Oudkerk in :issue:`8713`).
Also, except when using the old *fork* start method, child processes
will no longer inherit unneeded handles/file descriptors from their parents
(part of :issue:`8713`).
:mod:`multiprocessing` now relies on :mod:`runpy` (which implements the
``-m`` switch) to initialise ``__main__`` appropriately in child processes
when using the ``spawn`` or ``forkserver`` start methods. This resolves some
edge cases where combining multiprocessing, the ``-m`` command line switch
and explicit relative imports could cause obscure failures in child
processes. (Contributed by Nick Coghlan in :issue:`19946`)
operator
--------
There is now a pure-python version of the :mod:`operator` module available for
reference and for use by alternate implementations of Python. (Contributed by
Zachary Ware in :issue:`16694`.)
os
--
New functions to get and set the :ref:`inheritable flag <fd_inheritance>` of a file
descriptors or a Windows handle:
* :func:`os.get_inheritable`, :func:`os.set_inheritable`
* :func:`os.get_handle_inheritable`, :func:`os.set_handle_inheritable`
The :mod:`os` module now provides a :func:`~os.cpu_count` function, analogous to
the :func:`multiprocessing.cpu_count` function (which is now implemented in
terms of the new :mod:`os` function). (Contributed by Trent Nelson, Yogesh
Chaudhari, Victor Stinner, and Charles-François Natali in :issue:`17914`.)
pdb
---
The ``print`` command has been removed from :mod:`pdb`, restoring access to the
``print`` function.
Rationale: Python2's ``pdb`` did not have a ``print`` command; instead,
entering ``print`` executed the ``print`` statement. In Python3 ``print`` was
mistakenly made an alias for the pdb :pdbcmd:`p` command. ``p``, however,
prints the ``repr`` of its argument, not the ``str`` like the Python2 ``print``
command did. Worse, the Python3 ``pdb print`` command shadowed the Python3
``print`` function, making it inaccessible at the ``pdb`` prompt.
(Contributed by Connor Osborn in :issue:`18764`.)
.. _whatsnew-protocol-4:
pickle
------
protocol 4
:mod:`pickle` now supports (but does not use by default) a new pickle protocol,
protocol 4. This new protocol addresses a number of issues that were present
in previous protocols, such as the serialization of nested classes, very large
strings and containers, or classes whose :meth:`__new__` method takes
keyword-only arguments. It also provides some efficiency improvements.
.. seealso::
:pep:`3154` -- Pickle protocol 4
PEP written by Antoine Pitrou and implemented by Alexandre Vassalotti.
poplib
------
Two new methods have been added to :mod:`poplib`: :meth:`~poplib.POP3.capa`,
which returns the list of capabilities advertised by the POP server, and
:meth:`~poplib.POP3.stls`, which switches a clear-text POP3 session into an
encrypted POP3 session if the POP server supports it. (Contributed by Lorenzo
Catucci in :issue:`4473`.)
pprint
------
The :mod:`pprint` module now supports *compact* mode for formatting long
sequences (:issue:`19132`).
Long strings are now wrapped using Python's normal line continuation
syntax (Contributed by Antoine Pitrou in :issue:`17150`.)
pty
---
:func:`pty.spawn` now returns the status value from :func:`os.waitpid` on
the child process, instead of ``None``. (Contributed by Gregory P. Smith.)
pydoc
-----
While significant changes have not been made to :mod:`pydoc` directly,
its handling of custom ``__dir__`` methods and various descriptor
behaviours has been improved substantially by the underlying changes in
the :mod:`inspect` module.
re
--
Added :func:`re.fullmatch` function and :meth:`regex.fullmatch` method,
which anchor the pattern at both ends of the string to match.
(Contributed by Matthew Barnett in :issue:`16203`.)
The repr of :ref:`regex objects <re-objects>` now includes the pattern
and the flags; the repr of :ref:`match objects <match-objects>` now
includes the start, end, and the part of the string that matched.
(Contributed by Serhiy Storchaka in :issue:`13592` and :issue:`17087`.)
resource
--------
New :func:`resource.prlimit` function and Linux specific constants.
(Contributed by Christian Heimes in :issue:`16595` and :issue:`19324`.)
select
------
:class:`~select.epoll` objects now support the context management protocol.
When used in a :keyword:`with` statement, the :meth:`~select.epoll.close`
method will be called automatically at the end of the block. (Contributed
by Serhiy Storchaka in :issue:`16488`.)
shelve
------
:class:`~shelve.Shelf` instances may now be used in :keyword:`with` statements,
and will be automatically closed at the end of the :keyword:`with` block.
(Contributed by Filip Gruszczyński in :issue:`13896`.)
smtpd
-----
The :class:`~smtpd.SMTPServer` and :class:`~smtpd.SMTPChannel` classes now
accept a *map* keyword argument, which if specified is passed in to
:class:`asynchat.async_chat` as its *map* argument. This allows an application
to avoid affecting the global socket map. (Contributed by Vinay Sajip in
:issue:`11959`.)
smtplib
-------
:exc:`~smtplib.SMTPException` is now a subclass of :exc:`OSError`, which allows
both socket level errors and SMTP protocol level errors to be caught in one
try/except statement by code that only cares whether or not an error occurred.
(:issue:`2118`).
socket
------
The socket module now supports the :data:`~socket.CAN_BCM` protocol on
platforms that support it. (Contributed by Brian Thorne in :issue:`15359`.)
Socket objects have new methods to get or set their :ref:`inheritable flag
<fd_inheritance>`, :meth:`~socket.socket.get_inheritable` and
:meth:`~socket.socket.set_inheritable`.
The ``socket.AF_*`` and ``socket.SOCK_*`` constants are now enumeration values
using the new :mod:`enum` module. This allows meaningful names to be printed
during debugging, instead of integer "magic numbers".
The :data:`~socket.AF_LINK` constant is now available on BSD and OSX.
sqlite3
-------
A new boolean parameter, *uri*, to the :func:`~sqlite3.connect` function can
be used to indicate that the *database* parameter is a ``uri`` (see
the `SQLite URI documentation <http://www.sqlite.org/uri.html>`_).
(Contributed by poq in :issue:`13773`.)
ssl
---
.. _whatsnew-tls-11-12:
:data:`~ssl.PROTOCOL_TLSv1_1` and :data:`~ssl.PROTOCOL_TLSv1_2` (TLSv1.1 and
TLSv1.2 support) have been added; support for these protocols is only available if
Python is linked with OpenSSL 1.0.1 or later. (Contributed by Michele Orrù and
Antoine Pitrou in :issue:`16692`)
New function :func:`~ssl.get_default_verify_paths` returns
a named tuple of the paths and environment variables that the
:meth:`~ssl.SSLContext.set_default_verify_paths` method uses to set
OpenSSL's default ``cafile`` and ``capath``. This can be an aid in
debugging default verification issues. (Contributed by Christian Heimes
in :issue:`18143`.)
:class:`~ssl.SSLContext` has a new method,
:meth:`~ssl.SSLContext.cert_store_stats`, that reports the number of loaded
``X.509`` certs, ``X.509 CA`` certs, and certificate revocation lists (``crl``\
s), as well as a :meth:`~ssl.SSLContext.get_ca_certs` method that returns a
list of the loaded ``CA`` certificates. (Contributed by Christian Heimes in
and :issue:`18147`.)
Add :func:`ssl.enum_cert_store` to retrieve certificates and CRL from Windows'
cert store. (Contributed by Christian Heimes in :issue:`17134`.)
Support for server-side SNI using the new
:meth:`ssl.SSLContext.set_servername_callback` method.
(Contributed by Daniel Black in :issue:`8109`.)
stat
----
The :mod:`stat` module is now backed by a C implementation in :mod:`_stat`. A C
implementation is required as most of the values aren't standardized and
platform-dependent. (Contributed by Christian Heimes in :issue:`11016`.)
The module supports new file types: door, event port and whiteout.
struct
------
:mod:`struct` now supports the streamed unpacking of a buffer containing
repeated instances of a given format of data. Both a module level
:mod:`~struct.iter_unpack` function and a :meth:`struct.Struct.iter_unpack`
method on compiled formats have been added. (Contributed by Antoine Pitrou in
:issue:`17804`.)
subprocess
----------
:func:`~subprocess.check_output` now accepts an *input* argument that can
be used to provide the contents of ``stdin`` for the command that is run.
(Contributed by Zack Weinberg in :issue:`16624`.)
sunau
-----
The :meth:`~sunau.getparams` method now returns a namedtuple rather than a
plain tuple. (Contributed by Claudiu Popa in :issue:`18901`.)
:meth:`sunau.open` now supports the context manager protocol (:issue:`18878`).
sys
---
New function :func:`sys.getallocatedblocks` returns the current number of
blocks allocated by the interpreter (in CPython with the default
``--with-pymalloc`` setting, this is allocations made through the
:c:func:`PyObject_Malloc` API). This can be useful for tracking memory leaks,
especially if automated via a test suite. (Contributed by Antoine Pitrou
in :issue:`13390`.)
traceback
---------
A new :func:`traceback.clear_frames` function takes a traceback object
and clears the local variables in all of the frames it references,
reducing the amount of memory consumed (:issue:`1565525`).
urllib
------
:mod:`urllib.request` now supports ``data:`` URLs via the
:class:`~urllib.request.DataHandler` class. (Contributed by Mathias Panzenböck
in :issue:`16423`.)
unittest
--------
The :class:`~unittest.TestCase` class has a new method,
:meth:`~unittest.TestCase.subTest`, that produces a context manager whose
:keyword:`with` block becomes a "sub-test". This context manager allows a test
method to dynamically generate subtests by, say, calling the ``subTest``
context manager inside a loop. A single test method can thereby produce an
indefinite number of separately-identified and separately-counted tests, all of
which will run even if one or more of them fail. For example::
class NumbersTest(unittest.TestCase):
def test_even(self):
for i in range(6):
with self.subTest(i=1):
self.assertEqual(i % 2, 0)
will result in six subtests, each identified in the unittest verbose output
with a label consisting of the variable name ``i`` and a particular value for
that variable (``i=0``, ``i=1``, etc). See :ref:`subtests` for the full
version of this example. (Contributed by Antoine Pitrou in :issue:`16997`.)
:func:`unittest.main` now accepts an iterable of test names for
*defaultTest*, where previously it only accepted a single test name as a
string. (Contributed by Jyrki Pulliainen in :issue:`15132`.)
If :class:`~unittest.SkipTest` is raised during test discovery (that is, at the
module level in the test file), it is now reported as a skip instead of an
error. (Contributed by Zach Ware in :issue:`16935`.)
:meth:`~unittest.TestLoader.discover` now sorts the discovered files to provide
consistent test ordering. (Contributed by Martin Melin and Jeff Ramnani in
:issue:`16709`.)
venv
----
:mod:`venv` now includes activation scripts for the ``csh`` and ``fish``
shells (Contributed by Andrew Svetlov in :issue:`15417`.)
wave
----
The :meth:`~wave.getparams` method now returns a namedtuple rather than a
plain tuple. (Contributed by Claudiu Popa in :issue:`17487`.)
:meth:`wave.open` now supports the context manager protocol. (Contributed
by Claudiu Popa in :issue:`17616`.)
weakref
-------
New :class:`~weakref.WeakMethod` class simulates weak references to bound
methods. (Contributed by Antoine Pitrou in :issue:`14631`.)
New :class:`~weakref.finalize` class makes it possible to register a callback
to be invoked when an object is garbage collected, without needing to
carefully manage the lifecycle of the weak reference itself. (Contributed by
Richard Oudkerk in :issue:`15528`)
The callback, if any, associated with a :class:`~weakref.ref` is now
exposed via the :attr:`~weakref.ref.__callback__` attribute. (Contributed
by Mark Dickinson in :issue:`17643`.)
xml.etree
---------
A new parser, :class:`~xml.etree.ElementTree.XMLPullParser`, allows a
non-blocking applications to parse XML documents. An example can be
seen at :ref:`elementtree-pull-parsing`. (Contributed by Antoine
Pitrou in :issue:`17741`.)
The :mod:`xml.etree.ElementTree` :func:`~xml.etree.ElementTree.tostring` and
:func:`~xml.etree.ElementTree.tostringlist` functions, and the
:class:`~xml.etree.ElementTree.ElementTree`
:meth:`~xml.etree.ElementTree.ElementTree.write` method, now have a
*short_empty_elements* :ref:`keyword-only parameter <keyword-only_parameter>`
providing control over whether elements with no content are written in
abbreviated (``<tag />``) or expanded (``<tag></tag>``) form. (Contributed by
Ariel Poliak and Serhiy Storchaka in :issue:`14377`.)
zipfile.PyZipfile
-----------------
Add a filter function to ignore some packages (tests for instance),
:meth:`~zipfile.PyZipFile.writepy`.
(Contributed by Christian Tismer in :issue:`19274`.)
CPython Implementation Changes
==============================
.. _whatsnew-pep-445:
PEP 445: Customization of CPython Memory Allocators
---------------------------------------------------
:pep:`445` adds new C level interfaces to customize memory allocation in
the CPython interpreter.
.. seealso::
:pep:`445` -- Add new APIs to customize Python memory allocators
PEP written and implemented by Victor Stinner.
.. _whatsnew-pep-442:
PEP 442: Safe Object Finalization
---------------------------------
:pep:`442` removes the current limitations and quirks of object finalization
in CPython. With it, objects with :meth:`__del__` methods, as well as
generators with :keyword:`finally` clauses, can be finalized when they are
part of a reference cycle.
As part of this change, module globals are no longer forcibly set to
:const:`None` during interpreter shutdown in most cases, instead relying
on the normal operation of the cyclic garbage collector. This avoids a
whole class of interpreter-shutdown-time errors, usually involving
``__del__`` methods, that have plagued Python since the cyclic GC
was first introduced.
.. seealso::
:pep:`442` -- Safe object finalization
PEP written and implemented by Antoine Pitrou.
.. _whatsnew-pep-456:
PEP 456: Secure and Interchangeable Hash Algorithm
--------------------------------------------------
:pep:`456` follows up on earlier security fix work done on Python's hash
algorithm to address certain DOS attacks to which public facing APIs backed by
dictionary lookups may be subject. (See :issue:`14621` for the start of the
current round of improvements.) The PEP unifies CPython's hash code to make it
easier for a packager to substitute a different hash algorithm, and switches
Python's default implementation to a SipHash implementation on platforms that
have a 64 bit data type. Any performance differences in comparison with the
older FNV algorithm are trivial.
The PEP adds additional fields to the :func:`sys.hash_info` struct sequence to
describe the hash algorithm in use by the currently executing binary. Otherwise,
the PEP does not alter any existing CPython APIs.
.. _whatsnew-pep-436:
PEP 436: Argument Clinic
------------------------
"Argument Clinic" (:pep:`436`) is now part of the CPython build process
and can be used to simplify the process of defining and maintaining
accurate signatures for builtins and standard library extension modules
implemented in C.
.. note::
The Argument Clinic PEP is not fully up to date with the state of the
implementation. This has been deemed acceptable by the release manager
and core development team in this case, as Argument Clinic will not
be made available as a public API for third party use in Python 3.4.
.. seealso::
:pep:`436` -- The Argument Clinic DSL
PEP written and implemented by Larry Hastings.
Other Build and C API Changes
-----------------------------
* The new :c:func:`Py_SetStandardStreamEncoding` pre-initialization API
allows applications embedding the CPython interpreter to reliably force
a particular encoding and error handler for the standard streams
(Contributed by Bastien Montagne and Nick Coghlan in :issue:`16129`)
* Most Python C APIs that don't mutate string arguments are now correctly
marked as accepting ``const char *`` rather than ``char *`` (Contributed
by Serhiy Storchaka in :issue:`1772673`).
* New shell version of ``python-config``; can be used even when a python
interpreter is not available (for example, in cross compilation scenarios).
Other Improvements
==================
* Tab-completion is now enabled by default in the interactive interpreter.
(Contributed by Antoine Pitrou and Éric Araujo in :issue:`5845`.)
* Invoking the Python interpreter with ``--version`` now outputs the version to
standard output instead of standard error (:issue:`18338`). Similar changes
were made to :mod:`argparse` (:issue:`18920`) and other modules that have
script-like invocation capabilities (:issue:`18922`).
* The CPython Windows installer now adds ``.py`` to the :envvar:`PATHEXT`
variable when extensions are registered, allowing users to run a python
script at the windows command prompt by just typing its name without the
``.py`` extension. (Contributed by Paul Moore in :issue:`18569`.)
* A new ``make`` target `coverage-report
<http://docs.python.org/devguide/coverage.html#measuring-coverage-of-c-code-with-gcov-and-lcov>`_
will build python, run the test suite, and generate an HTML coverage report
for the C codebase using ``gcov`` and `lcov
<http://ltp.sourceforge.net/coverage/lcov.php>`_.
* The ``-R`` option to the :ref:`python regression test suite <regrtest>` now
also checks for memory allocation leaks, using
:func:`sys.getallocatedblocks()`. (Contributed by Antoine Pitrou in
:issue:`13390`).
Significant Optimizations
=========================
* The UTF-32 decoder is now 3x to 4x faster. (Contributed by Serhiy Storchaka
in :issue:`14625`.)
* The cost of hash collisions for sets is now reduced. Each hash table
probe now checks a series of consecutive, adjacent key/hash pairs before
continuing to make random probes through the hash table. This exploits
cache locality to make collision resolution less expensive.
The collision resolution scheme can be described as a hybrid of linear
probing and open addressing. The number of additional linear probes
defaults to nine. This can be changed at compile-time by defining
LINEAR_PROBES to be any value. Set LINEAR_PROBES=0 to turn-off
linear probing entirely. (Contributed by Raymond Hettinger in
:issue:`18771`.)
* The interpreter starts about 30% faster. A couple of measures lead to the
speedup. The interpreter loads fewer modules on startup, e.g. the :mod:`re`,
:mod:`collections` and :mod:`locale` modules and their dependencies are no
longer imported by default. The marshal module has been improved to load
compiled Python code faster. (Contributed by Antoine Pitrou, Christian
Heimes and Victor Stinner in :issue:`19219`, :issue:`19218`, :issue:`19209`,
:issue:`19205` and :issue:`9548`)
* :class:`bz2.BZ2File` is now as fast or faster than the Python2 version for
most cases. :class:`lzma.LZMAFile` has also been optimized. (Contributed by
Serhiy Storchaka and Nadeem Vawda in :issue:`16034`.)
* :func:`random.getrandbits` is 20%-40% faster for small integers (the most
common use case). (Contributed by Serhiy Storchaka in :issue:`16674`).
* By taking advantage of the new storage format for strings, pickling of
strings is now significantly faster. (Contributed by Victor Stinner and
Antoine Pitrou in :issue:`15596`.)
* A performance issue in :meth:`io.FileIO.readall` has been solved. This
particularly affects Windows, and significantly speeds up the case of piping
significant amounts of data through :mod:`subprocess`. (Contributed
by Richard Oudkerk in :issue:`15758`.)
Deprecated
==========
This section covers various APIs and other features that have been deprecated
in Python 3.4, and will be removed in Python 3.5 or later. In most (but not
all) cases, using the deprecated APIs will produce a :exc:`DeprecationWarning`
when the interpreter is run with deprecation warnings enabled (for example, by
using ``-Wd``).
Deprecated Python Modules, Functions and Methods
------------------------------------------------
* :meth:`difflib.SequenceMatcher.isbjunk` and
:meth:`difflib.SequenceMatcher.isbpopular` were removed: use ``x in sm.bjunk`` and
``x in sm.bpopular``, where *sm* is a :class:`~difflib.SequenceMatcher` object.
* :func:`importlib.util.module_for_loader` is pending deprecation. Using
:func:`importlib.util.module_to_load` and
:meth:`importlib.abc.Loader.init_module_attrs` allows subclasses of a loader
to more easily customize module loading.
* The :mod:`imp` module is pending deprecation. To keep compatibility with
Python 2/3 code bases, the module's removal is currently not scheduled.
* The :mod:`formatter` module is pending deprecation and is slated for removal
in Python 3.6.
* MD5 as default digestmod for :mod:`hmac` is deprecated. Python 3.6 will
require an explicit digest name or constructor as *digestmod* argument.
* The internal ``Netrc`` class in the :mod:`ftplib` module has been documented
as deprecated in its docstring for quite some time. It now emits a
:exc:`DeprecationWarning` and will be removed completely in Python 3.5.
Deprecated Functions and Types in the C API
-------------------------------------------
XXX: None so far
Deprecated Features
-------------------
* Running :ref:`idle` with the ``-n`` flag (no subprocess) is deprecated.
However, the feature will not be removed until :issue:`18823` is resolved.
* The site module adding a "site-python" directory to sys.path, if it
exists, is deprecated (:issue:`19375`).
Removed
=======
Operating Systems No Longer Supported
-------------------------------------
Support for the following operating systems has been removed from the source
and build tools:
* OS/2 (:issue:`16135`).
* Windows 2000 (changeset e52df05b496a).
* VMS (:issue:`16136`).
API and Feature Removals
------------------------
The following obsolete and previously deprecated APIs and features have been
removed:
* The unmaintained ``Misc/TextMate`` and ``Misc/vim`` directories have been
removed (see the `devguide <http://docs.python.org/devguide>`_
for suggestions on what to use instead).
* The ``SO`` makefile macro is removed (it was replaced by the
``SHLIB_SUFFIX`` and ``EXT_SUFFIX`` macros) (:issue:`16754`).
* The ``PyThreadState.tick_counter`` field has been removed; its value has
been meaningless since Python 3.2, when the "new GIL" was introduced.
* ``PyLoader`` and ``PyPycLoader`` have been removed from :mod:`importlib`.
(Contributed by Taras Lyapun in :issue:`15641`.)
* The *strict* argument to :class:`~http.client.HTTPConnection` and
:class:`~http.client.HTTPSConnection` has been removed. HTTP 0.9-style
"Simple Responses" are no longer supported.
* The deprecated :mod:`urllib.request.Request` getter and setter methods
``add_data``, ``has_data``, ``get_data``, ``get_type``, ``get_host``,
``get_selector``, ``set_proxy``, ``get_origin_req_host``, and
``is_unverifiable`` have been removed (use direct attribute access instead).
* Support for loading the deprecated ``TYPE_INT64`` has been removed from
:mod:`marshal`. (Contributed by Dan Riti in :issue:`15480`.)
Code Cleanups
-------------
* The unused and undocumented internal ``Scanner`` class has been removed from
the :mod:`pydoc` module.
Porting to Python 3.4
=====================
This section lists previously described changes and other bugfixes
that may require changes to your code.
Changes in the Python API
-------------------------
* The ABCs defined in :mod:`importlib.abc` now either raise the appropriate
exception or return a default value instead of raising
:exc:`NotImplementedError` blindly. This will only affect code calling
:func:`super` and falling through all the way to the ABCs. For compatibility,
catch both :exc:`NotImplementedError` or the appropriate exception as needed.
* The module type now initializes the :attr:`__package__` and :attr:`__loader__`
attributes to ``None`` by default. To determine if these attributes were set
in a backwards-compatible fashion, use e.g.
``getattr(module, '__loader__', None) is not None``.
* :meth:`importlib.util.module_for_loader` now sets ``__loader__`` and
``__package__`` unconditionally to properly support reloading. If this is not
desired then you will need to set these attributes manually. You can use
:func:`importlib.util.module_to_load` for module management.
* Import now resets relevant attributes (e.g. ``__name__``, ``__loader__``,
``__package__``, ``__file__``, ``__cached__``) unconditionally when reloading.
* Frozen packages no longer set ``__path__`` to a list containing the package
name but an empty list instead. Determing if a module is a package should be
done using ``hasattr(module, '__path__')``.
* :func:`py_compile.compile` now raises :exc:`FileExistsError` if the file path
it would write to is a symlink or a non-regular file. This is to act as a
warning that import will overwrite those files with a regular file regardless
of what type of file path they were originally.
* :meth:`importlib.abc.SourceLoader.get_source` no longer raises
:exc:`ImportError` when the source code being loaded triggers a
:exc:`SyntaxError` or :exc:`UnicodeDecodeError`. As :exc:`ImportError` is
meant to be raised only when source code cannot be found but it should, it was
felt to be over-reaching/overloading of that meaning when the source code is
found but improperly structured. If you were catching ImportError before and
wish to continue to ignore syntax or decoding issues, catch all three
exceptions now.
* :func:`functools.update_wrapper` and :func:`functools.wraps` now correctly
set the ``__wrapped__`` attribute to the function being wrapper, even if
that function also had its ``__wrapped__`` attribute set. This means
``__wrapped__`` attributes now correctly link a stack of decorated
functions rather than every ``__wrapped__`` attribute in the chain
referring to the innermost function. Introspection libraries that
assumed the previous behaviour was intentional can use
:func:`inspect.unwrap` to access the first function in the chain that has
no ``__wrapped__`` attribute.
* :class:`importlib.machinery.PathFinder` now passes on the current working
directory to objects in :data:`sys.path_hooks` for the empty string. This
results in :data:`sys.path_importer_cache` never containing ``''``, thus
iterating through :data:`sys.path_importer_cache` based on :data:`sys.path`
will not find all keys. A module's ``__file__`` when imported in the current
working directory will also now have an absolute path, including when using
``-m`` with the interpreter (this does not influence when the path to a file
is specified on the command-line).
* The removal of the *strict* argument to :class:`~http.client.HTTPConnection`
and :class:`~http.client.HTTPSConnection` changes the meaning of the
remaining arguments if you are specifying them positionally rather than by
keyword. If you've been paying attention to deprecation warnings your code
should already be specifying any additional arguments via keywords.
* Strings between ``from __future__ import ...`` statements now *always* raise
a :exc:`SyntaxError`. Previously if there was no leading docstring, an
interstitial string would sometimes be ignored. This brings CPython into
compliance with the language spec; Jython and PyPy already were.
(:issue:`17434`).
* :meth:`ssl.SSLSocket.getpeercert` and :meth:`ssl.SSLSocket.do_handshake`
now raise an :exc:`OSError` with ``ENOTCONN`` when the ``SSLSocket`` is not
connected, instead of the previous behavior of raising an
:exc:`AttributError`. In addition, :meth:`~ssl.SSLSocket.getpeercert`
will raise a :exc:`ValueError` if the handshake has not yet been done.
* :func:`base64.b32decode` now raises a :exc:`binascii.Error` when the
input string contains non-b32-alphabet characters, instead of a
:exc:`TypeError`. This particular :exc:`TypeError` was missed when the other
:exc:`TypeError`\ s were converted. (Contributed by Serhiy Storchaka in
:issue:`18011`.) Note: this change was also inadvertently applied in Python
3.3.3.
* The :attr:`~cgi.FieldStorage.file` attribute is now automatically closed when
the creating :class:`cgi.FieldStorage` instance is garbage collected. If you
were pulling the file object out separately from the :class:`cgi.FieldStorage`
instance and not keeping the instance alive, then you should either store the
entire :class:`cgi.FieldStorage` instance or read the contents of the file
before the :class:`cgi.FieldStorage` instance is garbage collected.
Changes in the C API
--------------------
* :c:func:`PyErr_SetImportError` now sets :exc:`TypeError` when its **msg**
argument is not set. Previously only ``NULL`` was returned with no exception
set.
* The result of the :c:data:`PyOS_ReadlineFunctionPointer` callback must
now be a string allocated by :c:func:`PyMem_RawMalloc` or
:c:func:`PyMem_RawRealloc`, or *NULL* if an error occurred, instead of a
string allocated by :c:func:`PyMem_Malloc` or :c:func:`PyMem_Realloc`.
* :c:func:`PyThread_set_key_value` now always set the value. In Python
3.3, the function did nothing if the key already exists (if the current
value is a non-NULL pointer).
* The ``f_tstate`` (thread state) field of the :c:type:`PyFrameObject`
structure has been removed to fix a bug: see :issue:`14432` for the
rationale.