states can be for this function, and ensure that only AttributeErrors
are masked. Any other exception raised via the equivalent of
getattr(cls, '__bases__') should be propagated up.
abstract_issubclass(): If abstract_get_bases() returns NULL, we must
call PyErr_Occurred() to see if an exception is being propagated, and
return -1 or 0 as appropriate. This is the specific fix for a problem
whereby if getattr(derived, '__bases__') raised an exception, an
"undetected error" would occur (under a debug build). This nasty
situation was uncovered when writing a security proxy extension type
for the Zope3 project, where the security proxy raised a Forbidden
exception on getattr of __bases__.
PyObject_IsInstance(), PyObject_IsSubclass(): After both calls to
abstract_get_bases(), where we're setting the TypeError if the return
value is NULL, we must first check to see if an exception occurred,
and /not/ mask an existing exception.
Neil Schemenauer should double check that these changes don't break
his ExtensionClass examples (there aren't any test cases for those
examples and abstract_get_bases() was added by him in response to
problems with ExtensionClass). Neil, please add test cases if
possible!
I belive this is a bug fix candidate for Python 2.2.2.
PyNumber_InPlaceMultiply insisted on calling sq_inplace_repeat if it
existed, even if nb_inplace_multiply also existed and the arguments
weren't right for sq_inplace_repeat. Change this to only use
sq_inplace_repeat if nb_inplace_multiply isn't defined.
Bugfix candidate.
PyNumber_Add() tries the nb_add slot first, then falls back to
sq_concat. However, tt didn't check the return value of sq_concat.
If sq_concat returns NotImplemented, raise the standard TypeError.
Due to the bizarre definition of _PyLong_Copy(), creating an instance
of a subclass of long with a negative value could cause core dumps
later on. Unfortunately it looks like the behavior of _PyLong_Copy()
is quite intentional, so the fix is more work than feels comfortable.
This fix is almost, but not quite, the code that Naofumi Honda added;
in addition, I added a test case.
confusing error messages. If a new-style class has no sequence or
mapping behavior, attempting to use the indexing notation with a
non-integer key would complain that the sequence index must be an
integer, rather than complaining that the operation is not supported.
should just avoid calling it in the first place to avoid waiting for a repr
of a large object like a dict or list. The result of PyObject_Repr() was
being leaked as well.
Bugfix candidate!
the va_list until we are sure we have a format string and need to use it;
this avoid premature initialization and having to finalize it several
different places because of error returns.
PyObject_CallFunctionObArgs() and PyObject_CallMethodObArgs() have the
advantage that no format strings need to be parsed. The CallMethod
variant also avoids creating a new string object in order to retrieve
a method from an object as well.
outer level, the iterator protocol is used for memory-efficiency (the
outer sequence may be very large if fully materialized); at the inner
level, PySequence_Fast() is used for time-efficiency (these should
always be sequences of length 2).
dictobject.c, new functions PyDict_{Merge,Update}FromSeq2. These are
wholly analogous to PyDict_{Merge,Update}, but process a sequence-of-2-
sequences argument instead of a mapping object. For now, I left these
functions file static, so no corresponding doc changes. It's tempting
to change dict.update() to allow a sequence-of-2-seqs argument too.
Also changed the name of dictionary's keyword argument from "mapping"
to "x". Got a better name? "mapping_or_sequence_of_pairs" isn't
attractive, although more so than "mosop" <wink>.
abstract.h, abstract.tex: Added new PySequence_Fast_GET_SIZE function,
much faster than going thru the all-purpose PySequence_Size.
libfuncs.tex:
- Document dictionary().
- Fiddle tuple() and list() to admit that their argument is optional.
- The long-winded repetitions of "a sequence, a container that supports
iteration, or an iterator object" is getting to be a PITA. Many
months ago I suggested factoring this out into "iterable object",
where the definition of that could include being explicit about
generators too (as is, I'm not sure a reader outside of PythonLabs
could guess that "an iterator object" includes a generator call).
- Please check my curly braces -- I'm going blind <0.9 wink>.
abstract.c, PySequence_Tuple(): When PyObject_GetIter() fails, leave
its error msg alone now (the msg it produces has improved since
PySequence_Tuple was generalized to accept iterable objects, and
PySequence_Tuple was also stomping on the msg in cases it shouldn't
have even before PyObject_GetIter grew a better msg).
response to a message by Laura Creighton on c.l.py. E.g.
>>> 0+''
TypeError: unsupported operand types for +: 'int' and 'str'
(previously this did not mention the operand types)
>>> ''+0
TypeError: cannot concatenate 'str' and 'int' objects
isinstance() now allows any object as the first argument and a class, a
type or something with a __bases__ tuple attribute for the second
argument. This closes SF patch #464992.
__rop__ now takes precendence over __op__. Those circumstances are:
- Both arguments are new-style classes
- Both arguments are new-style numbers
- Their implementation slots for tp_op differ
- Their types differ
- The right argument's type is a subtype of the left argument's type
Also did this for the ternary operator (pow) -- only the binary case
is dealt with properly though, since __rpow__ is not supported anyway.
directly, as the only thing done here (replace NULL args with an empty
tuple) is also done there.
XXX Maybe we should take one step further and equate the two at the
macro level? That's harder though because PyEval_Call* is declared in
a header that's not included standard. But it is silly that
PyObject_CallObject calls PyEval_CallObject which calls back to
PyObject_Call. Maybe PyEval_CallObject should be moved into this file
instead? All I know is that there are too many call APIs! The
differences between PyObject_Call and PyEval_CallObjectWithKeywords is
that the latter allows args to be NULL, and does explicit type checks
for args and kwds.
tuple(i) repaired to return a true tuple when i is an instance of a
tuple subclass.
Added PyTuple_CheckExact macro.
PySequence_Tuple(): if a tuple-like object isn't exactly a tuple, it's
not safe to return the object as-is -- make a new tuple of it instead.
Given an immutable type M, and an instance I of a subclass of M, the
constructor call M(I) was just returning I as-is; but it should return a
new instance of M. This fixes it for M in {int, long}. Strings, floats
and tuples remain to be done.
Added new macros PyInt_CheckExact and PyLong_CheckExact, to more easily
distinguish between "is" and "is a" (i.e., only an int passes
PyInt_CheckExact, while any sublass of int passes PyInt_Check).
Added private API function _PyLong_Copy.
iterable object. I'm not sure how that got overlooked before!
Got rid of the internal _PySequence_IterContains, introduced a new
internal _PySequence_IterSearch, and rewrote all the iteration-based
"count of", "index of", and "is the object in it or not?" routines to
just call the new function. I suppose it's slower this way, but the
code duplication was getting depressing.
corresponding "getitem" operation (sq_item or mp_subscript) is
implemented. I realize that "sequence-ness" and "mapping-ness" are
poorly defined (and the tests may still be wrong for user-defined
instances, which always have both slots filled), but I believe that a
sequence that doesn't support its getitem operation should not be
considered a sequence. All other operations are optional though.
For example, the ZODB BTree tests crashed because PySequence_Check()
returned true for a dictionary! (In 2.2, the dictionary type has a
tp_as_sequence pointer, but the only field filled is sq_contains, so
you can write "if key in dict".) With this fix, all standalone ZODB
tests succeed.
- Do not compile unicodeobject, unicodectype, and unicodedata if Unicode is disabled
- check for Py_USING_UNICODE in all places that use Unicode functions
- disables unicode literals, and the builtin functions
- add the types.StringTypes list
- remove Unicode literals from most tests.
This introduces:
- A new operator // that means floor division (the kind of division
where 1/2 is 0).
- The "future division" statement ("from __future__ import division)
which changes the meaning of the / operator to implement "true
division" (where 1/2 is 0.5).
- New overloadable operators __truediv__ and __floordiv__.
- New slots in the PyNumberMethods struct for true and floor division,
new abstract APIs for them, new opcodes, and so on.
I emphasize that without the future division statement, the semantics
of / will remain unchanged until Python 3.0.
Not yet implemented are warnings (default off) when / is used with int
or long arguments.
This has been on display since 7/31 as SF patch #443474.
Flames to /dev/null.
safely together and don't duplicate logic (the common logic was factored
out into new private API function _PySequence_IterContains()).
Visible change:
some_complex_number in some_instance
no longer blows up if some_instance has __getitem__ but neither
__contains__ nor __iter__. test_iter changed to ensure that remains true.
NEEDS DOC CHANGES
A few more AttributeErrors turned into TypeErrors, but in test_contains
this time.
The full story for instance objects is pretty much unexplainable, because
instance_contains() tries its own flavor of iteration-based containment
testing first, and PySequence_Contains doesn't get a chance at it unless
instance_contains() blows up. A consequence is that
some_complex_number in some_instance
dies with a TypeError unless some_instance.__class__ defines __iter__ but
does not define __getitem__.
NEEDS DOC CHANGES.
This one surprised me! While I expected tuple() to be a no-brainer, turns
out it's actually dripping with consequences:
1. It will *allow* the popular PySequence_Fast() to work with any iterable
object (code for that not yet checked in, but should be trivial).
2. It caused two std tests to fail. This because some places used
PyTuple_Sequence() (the C spelling of tuple()) as an indirect way to test
whether something *is* a sequence. But tuple() code only looked for the
existence of sq->item to determine that, and e.g. an instance passed
that test whether or not it supported the other operations tuple()
needed (e.g., __len__). So some things the tests *expected* to fail
with an AttributeError now fail with a TypeError instead. This looks
like an improvement to me; e.g., test_coercion used to produce 559
TypeErrors and 2 AttributeErrors, and now they're all TypeErrors. The
error details are more informative too, because the places calling this
were *looking* for TypeErrors in order to replace the generic tuple()
"not a sequence" msg with their own more specific text, and
AttributeErrors snuck by that.
to no longer insist that len(seq) be defined.
NEEDS DOC CHANGES.
This is meant to be a model for how other functions of this ilk (max,
filter, etc) can be generalized similarly. Feel encouraged to grab your
favorite and convert it!
Note some cute consequences:
list(file) == file.readlines() == list(file.xreadlines())
list(dict) == dict.keys()
list(dict.iteritems()) = dict.items()
list(xrange(i, j, k)) == range(i, j, k)
sees it (test_iter.py is unchanged).
- Added a tp_iternext slot, which calls the iterator's next() method;
this is much faster for built-in iterators over built-in types
such as lists and dicts, speeding up pybench's ForLoop with about
25% compared to Python 2.1. (Now there's a good argument for
iterators. ;-)
- Renamed the built-in sequence iterator SeqIter, affecting the C API
functions for it. (This frees up the PyIter prefix for generic
iterator operations.)
- Added PyIter_Check(obj), which checks that obj's type has a
tp_iternext slot and that the proper feature flag is set.
- Added PyIter_Next(obj) which calls the tp_iternext slot. It has a
somewhat complex return condition due to the need for speed: when it
returns NULL, it may not have set an exception condition, meaning
the iterator is exhausted; when the exception StopIteration is set
(or a derived exception class), it means the same thing; any other
exception means some other error occurred.
new slot tp_iter in type object, plus new flag Py_TPFLAGS_HAVE_ITER
new C API PyObject_GetIter(), calls tp_iter
new builtin iter(), with two forms: iter(obj), and iter(function, sentinel)
new internal object types iterobject and calliterobject
new exception StopIteration
new opcodes for "for" loops, GET_ITER and FOR_ITER (also supported by dis.py)
new magic number for .pyc files
new special method for instances: __iter__() returns an iterator
iteration over dictionaries: "for x in dict" iterates over the keys
iteration over files: "for x in file" iterates over lines
TODO:
documentation
test suite
decide whether to use a different way to spell iter(function, sentinal)
decide whether "for key in dict" is a good idea
use iterators in map/filter/reduce, min/max, and elsewhere (in/not in?)
speed tuning (make next() a slot tp_next???)
result-object-pointer that is passed in, when an exception occurs during
coercion. The pointer has to be explicitly initialized in the caller to avoid
putting trash on the Python stack.
is no __getslice__ available. Also does the same for C extension types.
Includes rudimentary documentation (it could use a cross reference to the
section on slice objects, I couldn't figure out how to do that) and a test
suite for all Python __hooks__ I could think of, including the new
behaviour.
This doesn't change the copyright status for these files -- just the
markings! Doing it on the main branch for these three files for which
the HEAD revision was pushed back into 1.6.
his copy of test_contains.py seems to be broken -- the lines he
deleted were already absent). Checkin messages:
New Unicode support for int(), float(), complex() and long().
- new APIs PyInt_FromUnicode() and PyLong_FromUnicode()
- added support for Unicode to PyFloat_FromString()
- new encoding API PyUnicode_EncodeDecimal() which converts
Unicode to a decimal char* string (used in the above new
APIs)
- shortcuts for calls like int(<int object>) and float(<float obj>)
- tests for all of the above
Unicode compares and contains checks:
- comparing Unicode and non-string types now works; TypeErrors
are masked, all other errors such as ValueError during
Unicode coercion are passed through (note that PyUnicode_Compare
does not implement the masking -- PyObject_Compare does this)
- contains now works for non-string types too; TypeErrors are
masked and 0 returned; all other errors are passed through
Better testing support for the standard codecs.
Misc minor enhancements, such as an alias dbcs for the mbcs codec.
Changes:
- PyLong_FromString() now applies the same error checks as
does PyInt_FromString(): trailing garbage is reported
as error and not longer silently ignored. The only characters
which may be trailing the digits are 'L' and 'l' -- these
are still silently ignored.
- string.ato?() now directly interface to int(), long() and
float(). The error strings are now a little different, but
the type still remains the same. These functions are now
ready to get declared obsolete ;-)
- PyNumber_Int() now also does a check for embedded NULL chars
in the input string; PyNumber_Long() already did this (and
still does)
Followed by:
Looks like I've gone a step too far there... (and test_contains.py
seem to have a bug too).
I've changed back to reporting all errors in PyUnicode_Contains()
and added a few more test cases to test_contains.py (plus corrected
the join() NameError).
Previously, this said "unsubscriptable object"; in 1.5.1, the reverse
problem existed, where None[''] would complain about a non-integer
index. This fix does the right thing in all cases (for get, set and
del item).
faster (using PyList_GetSlice()). Also added a test for a NULL
argument, as with PySequence_Tuple(). (Hmm... Better names for these
two would be PyList_FromSequence() and PyTuple_FromSequence(). Oh well.)
"indefinite length" sequences. These should still have a length, but
the length is only used as a hint -- the actual length of the sequence
is determined by the item that raises IndexError, which may be either
smaller or larger than what len() returns. (This is a novelty; map(),
filter() and reduce() only allow the actual length to be larger than
what len() returns, not shorter. I'll fix that shortly.)
conversions. Formerly, for example, int('-') would return 0 instead
of raising ValueError, and int(' 0') would raise ValueError
(complaining about a null byte!) instead of 0...
Make sure that no tp_as_numbers->nb_<whatever> function is called
without checking for a NULL pointer. Marc-Andre Lemburg will love it!
(Except that he's just rewritten all this code for a different
approach to coercions ;-( )
programming style.
Recoded many routines to incorporate better error checking, and/or
better versions of the same function found elsewhere
(e.g. bltinmodule.c or ceval.c). In particular,
Py_Number_{Int,Long,Float}() now convert from strings, just like the
built-in functions int(), long() and float().
Sequences and mappings are now safe to have NULL function pointers
anywhere in their tp_as_sequence or tp_as_mapping fields. (A few
places in other files need to be checked in too.)
Renamed PySequence_In() to PySequence_Contains().
sequence, otherwise
operator.indexOf([4, 3, 2, 1], 9) would raise a SystemError!
Note: it might be wise to double check all these functions. I haven't
done that yet.
